Commit graph

27,507 commits

Author SHA1 Message Date
Hans Verkuil
cba63cf8f9 [media] vivid: default to single planar device instances
The default used to be that the first vivid device instance was
single planar, the second multi planar, the third single planar, etc.

However, that turned out to be unexpected and awkward. Change the
driver to always default to single planar.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 14:43:26 -02:00
Daniel Kurtz
656d7077d8 dt-bindings: iommu: Add documentation for rockchip iommu
Add binding documentation for Rockchip IOMMU.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-11-03 17:29:09 +01:00
Huang Rui
460d098cb6 usb: dwc3: make HIRD threshold configurable
HIRD threshold should be configurable by different platforms.

From DesignWare databook:
When HIRD_Threshold[4] is set to 1b1 and HIRD value is greater than or
equal to the value in HIRD_Threshold[3:0], dwc3 asserts output signals
utmi_l1_suspend_n to put PHY into Deep Low-Power mode in L1.

When HIRD_Threshold[4] is set to 1b0 or the HIRD value is less than
HIRD_Threshold[3:0], dwc3 asserts output signals utmi_sleep_n on L1.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:41 -06:00
Huang Rui
0effe0a3e7 usb: dwc3: add disable usb2 suspend phy quirk
This patch adds disable usb2 suspend phy quirk, and some special platforms
can configure that if it is needed.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:39 -06:00
Huang Rui
59acfa2081 usb: dwc3: add disable usb3 suspend phy quirk
This patch adds disable usb3 suspend phy quirk, and some special platforms
can configure that if it is needed.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:39 -06:00
Huang Rui
6b6a0c9a3f usb: dwc3: add Tx de-emphasis quirk
This patch adds Tx de-emphasis quirk, and the Tx de-emphasis value is
configurable according to PIPE3 specification.

Value		Description
0		-6dB de-emphasis
1		-3.5dB de-emphasis
2		No de-emphasis
3		Reserved

It can be configured on DT or platform data.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:39 -06:00
Huang Rui
14f4ac53df usb: dwc3: add rx_detect to polling lfps quirk
This patch adds RX_DETECT to Polling.LFPS control quirk, and some special
platforms can configure that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:38 -06:00
Huang Rui
fb67afca17 usb: dwc3: add lfps filter quirk
This patch adds LFPS filter quirk, and some special platforms can configure
that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:38 -06:00
Huang Rui
41c06ffdf9 usb: dwc3: add delay phy power change quirk
This patch adds delay PHY power change from P0 to P1/P2/P3 when link state
changing from U0 to U1/U2/U3 respectively, and some special platforms can
configure that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:37 -06:00
Huang Rui
a2a1d0f583 usb: dwc3: add delay p1p2p3 quirk
This patch adds delay P0 to P1/P2/P3 quirk for U2/U2/U3, and some special
platforms can configure that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:37 -06:00
Huang Rui
df31f5b3a6 usb: dwc3: add request p1p2p3 quirk
This patch adds request P1/P2/P3 quirk for U2/U2/U3, and some special
platforms can configure that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:37 -06:00
Huang Rui
b5a65c4063 usb: dwc3: add P3 in U2 SS inactive quirk
This patch adds P3 in U2 SS inactive quirk, and some special platforms can
configure that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:36 -06:00
Huang Rui
9a5b2f3167 usb: dwc3: add u2exit lfps quirk
This patch adds u2exit lfps quirk, and some special platforms can configure
that if it is needed.

[ balbi@ti.com : added DeviceTree binding documentation ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:36 -06:00
Huang Rui
80caf7d21a usb: dwc3: add lpm erratum support
When parameter DWC_USB3_LPM_ERRATA_ENABLE is enabled in Andvanced
Configuration of coreConsultant, it supports of xHCI BESL Errata Dated
10/19/2011 is enabled in host mode. In device mode it adds the capability
to send NYET response threshold based on the BESL value received in the LPM
token, and the threhold is configurable for each soc platform.

This patch adds an entry that soc platform is able to define the lpm
capacity with their own device tree or bus glue layer.

[ balbi@ti.com : added devicetree documentation, spelled threshold
		completely, made sure threshold is only applied to
		proper core revisions. ]

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:36 -06:00
Huang Rui
3b81221a52 usb: dwc3: add disscramble quirk
This patch adds disscramble quirk, and it only needs to be enabled at fpga
board on some vendor platforms.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:03:36 -06:00
Robert Jarzmik
545d64a46c usb: gadget: pxa27x_udc device-tree documentation
Add documentation for device-tree binding of arm PXA 27x udc (usb
device) driver.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: devicetree@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:01:17 -06:00
Felipe Balbi
f2918ad89d usb: gadget: udc: document our sysfs ABI
I noticed that this has been missing for quite
some time so I decided it was about time to
document it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-03 10:01:00 -06:00
Mark Brown
ebc01f593b Linux 3.18-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUVrf1AAoJEHm+PkMAQRiGtUkH/RX941uLQo0V+K0dy6LKD+Dv
 YmdmS7wQQ/Y5ji+qaaMgpqS1Fcjh7q1qXLSCstxiU42xVsulFKF1iA4fbesdmUvN
 zrtRYFCDPH2s0dycRfui9EW0ss/Bb3/l2aiRdpyzMBgwHa3Em2z74CdY9EPYkePW
 zozrNSwSt+iTSw9sg9SdaBiayV+jlFwJ+pgpjUccpRz3Ob7z5LlYtuLk4pITtFuw
 hc00bdCeduD0UJ3NC7WLS4USH5ZXZLkNB+OoteUw6srPUiDeaG0LefdV4D4J1eKe
 dcUXgoCMAqqc3a4PybC0sYBGumJmdaQwNVkh7RBLwUkQ0zjiuvbNcjSYfTG2yFs=
 =vR5Z
 -----END PGP SIGNATURE-----

Merge tag 'v3.18-rc3' into asoc-sgtl5000

Linux 3.18-rc3
2014-11-03 15:13:33 +00:00
Mauro Carvalho Chehab
8d6d514941 [media] Update Documentation cardlist
Some new devices got added. Update cardlists.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 11:35:01 -02:00
Doug Anderson
c99ade6641 regulator: Document binding for regulator suspend voltage
This patch builds upon (291d761 regulator: Document binding for
regulator suspend state for PM state) to allow setting the uV in
addition to the state at suspend time.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03 12:27:04 +00:00
Michael S. Tsirkin
7f05db6a20 kvm: drop unsupported capabilities, fix documentation
No kernel ever reported KVM_CAP_DEVICE_MSIX, KVM_CAP_DEVICE_MSI,
KVM_CAP_DEVICE_ASSIGNMENT, KVM_CAP_DEVICE_DEASSIGNMENT.

This makes the documentation wrong, and no application ever
written to use these capabilities has a chance to work correctly.
The only way to detect support is to try, and test errno for ENOTTY.
That's unfortunate, but we can't fix the past.

Document the actual semantics, and drop the definitions from
the exported header to make it easier for application
developers to note and fix the bug.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-03 12:07:29 +01:00
Tiejun Chen
91690bf32e Documentation: virtual: kvm: correct one bit description in APF case
When commit 6adba52742 (KVM: Let host know whether the guest can
handle async PF in non-userspace context.) is introduced, actually
bit 2 still is reserved and should be zero. Instead, bit 1 is 1 to
indicate if asynchronous page faults can be injected when vcpu is
in cpl == 0, and also please see this,

in the file kvm_para.h, #define KVM_ASYNC_PF_SEND_ALWAYS (1 << 1).

Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-03 12:07:27 +01:00
Russell King
06e944b8e5 generic fixmaps
ARM support for CONFIG_DEBUG_RODATA
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 Comment: Kees Cook <kees@outflux.net>
 
 iQIcBAABCgAGBQJUQDtHAAoJEIly9N/cbcAmS/gQAJnkmOBN5WLymkYE02QMcRZM
 l70c131QOGimFWUZpPxsyHdUFwASogxGet6LsGcbB40ayCrQw4tzXBlcFOvbY/dM
 HC+1I3CqRDphU/q2Mm/2bpg2F+VPbwIyxACPtsqW824muTHK47qDs3R9vVYDtfPV
 xupOpqz6qNFxgE5/TpDjsjVeJol/i+ygEQzIxo70m0FnLVv5t/deGjDM6bvfqwdm
 po/+hUlkW8lpyQspuucBCxfGagaCSkd67hyHMvq5zDjz1+6T1XljdA7jc7rSa9bI
 eCWuJgmM51AaA1lr+Eu1raSOduk0x1GU33wf1Y0z+qZ0A6ELTDmiY/SLMK6o8n6T
 4kPmzigRRT9a4B9kTR/mj9IyG+LAKu8Bvppl5CedNp2xEtIEGppnHU3d7bFZIVq3
 gCIL0ZG26D467hgUEgJwdJwnIU2GqirR4XyD3Ml+hjGCq6L5QzZpUWiskgh+EoHw
 dIhbJnGBxB2MkVJW0zE+ajVdiFAeU7P3voR74B73kwC9H+S6Fo10pff9LZbs8BKd
 R5RH5xCPDXgjnkjDbXW8e9Zkr58IrT0ffFcwE1IuDQpTMKKQPIlH5DUlRLQSHau9
 abDZuCZpvAPvGO4korTsu0dAXYJHlilG5Ftd856Hmrs+32eMDX2DV+RT4m7YX2Dt
 7tLXNu6P1yRFnjFdGxtR
 =u3lA
 -----END PGP SIGNATURE-----

Merge tag 'ronx-next' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into devel-stable

generic fixmaps
ARM support for CONFIG_DEBUG_RODATA
2014-11-03 10:12:13 +00:00
Geert Uytterhoeven
689bd24c5e thermal: rcar: Add binding docs for new R-Car Gen2 SoCs
- r8a7792 (R-Car V2H)
  - r8a7793 (R-Car M2-N)
  - r8a7794 (R-Car E2)

r8a7791 is now called "R-Car M2-W".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-02 23:02:49 -04:00
Romain Perier
ccfe128d3b ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066
This patch adds initial support for the Marsboard RK3066. It enables
EMAC Rockchip which is the ethernet support on the board and registers
it as a supported rockchip platform.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-02 12:32:18 +01:00
Matt Ranostay
6bdd2fd1ed Input: cap11xx - support for irq-active-high option
Some applications need to use the irq-active-high push-pull option.
This allows it be enabled in the device tree child node.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-02 00:09:11 -07:00
Matt Ranostay
7609a5e973 Input: cap11xx - add support for various cap11xx devices
There are variants of the cap11xx device with a varying number of
capacitance detection channels.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-02 00:09:10 -07:00
Matt Ranostay
c77fd0a42b Input: rename cap1106 driver to cap11xx
There are several devices in cap11xx family besides cap1106. The driver can
be made to support all of them, so let's give it more generic name.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-02 00:09:10 -07:00
David S. Miller
55b42b5ca2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/phy/marvell.c

Simple overlapping changes in drivers/net/phy/marvell.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01 14:53:27 -04:00
Linus Torvalds
9f935675d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
 "A bunch of fixes for minor defects reported by Coverity, a few driver
  fixups and revert of i8042.nomux change so that we are once again
  enable active MUX mode if box claims to support it"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: i8042 - disable active multiplexing by default"
  Input: altera_ps2 - use correct type for irq return value
  Input: altera_ps2 - write to correct register when disabling interrupts
  Input: max77693-haptic - fix potential overflow
  Input: psmouse - remove unneeded check in psmouse_reconnect()
  Input: vsxxxaa - fix code dropping bytes from queue
  Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store()
  Input: opencores-kbd - fix error handling
  Input: wm97xx - adapt parameters to tosa touchscreen.
  Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544
  Input: stmpe-keypad - fix valid key line bitmask
  Input: soc_button_array - update calls to gpiod_get*()
2014-10-31 19:51:11 -07:00
Linus Torvalds
89453379aa Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "A bit has accumulated, but it's been a week or so since my last batch
  of post-merge-window fixes, so...

   1) Missing module license in netfilter reject module, from Pablo.
      Lots of people ran into this.

   2) Off by one in mac80211 baserate calculation, from Karl Beldan.

   3) Fix incorrect return value from ax88179_178a driver's set_mac_addr
      op, which broke use of it with bonding.  From Ian Morgan.

   4) Checking of skb_gso_segment()'s return value was not all
      encompassing, it can return an SKB pointer, a pointer error, or
      NULL.  Fix from Florian Westphal.

      This is crummy, and longer term will be fixed to just return error
      pointers or a real SKB.

   6) Encapsulation offloads not being handled by
      skb_gso_transport_seglen().  From Florian Westphal.

   7) Fix deadlock in TIPC stack, from Ying Xue.

   8) Fix performance regression from using rhashtable for netlink
      sockets.  The problem was the synchronize_net() invoked for every
      socket destroy.  From Thomas Graf.

   9) Fix bug in eBPF verifier, and remove the strong dependency of BPF
      on NET.  From Alexei Starovoitov.

  10) In qdisc_create(), use the correct interface to allocate
      ->cpu_bstats, otherwise the u64_stats_sync member isn't
      initialized properly.  From Sabrina Dubroca.

  11) Off by one in ip_set_nfnl_get_byindex(), from Dan Carpenter.

  12) nf_tables_newchain() was erroneously expecting error pointers from
      netdev_alloc_pcpu_stats().  It only returna a valid pointer or
      NULL.  From Sabrina Dubroca.

  13) Fix use-after-free in _decode_session6(), from Li RongQing.

  14) When we set the TX flow hash on a socket, we mistakenly do so
      before we've nailed down the final source port.  Move the setting
      deeper to fix this.  From Sathya Perla.

  15) NAPI budget accounting in amd-xgbe driver was counting descriptors
      instead of full packets, fix from Thomas Lendacky.

  16) Fix total_data_buflen calculation in hyperv driver, from Haiyang
      Zhang.

  17) Fix bcma driver build with OF_ADDRESS disabled, from Hauke
      Mehrtens.

  18) Fix mis-use of per-cpu memory in TCP md5 code.  The problem is
      that something that ends up being vmalloc memory can't be passed
      to the crypto hash routines via scatter-gather lists.  From Eric
      Dumazet.

  19) Fix regression in promiscuous mode enabling in cdc-ether, from
      Olivier Blin.

  20) Bucket eviction and frag entry killing can race with eachother,
      causing an unlink of the object from the wrong list.  Fix from
      Nikolay Aleksandrov.

  21) Missing initialization of spinlock in cxgb4 driver, from Anish
      Bhatt.

  22) Do not cache ipv4 routing failures, otherwise if the sysctl for
      forwarding is subsequently enabled this won't be seen.  From
      Nicolas Cavallari"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (131 commits)
  drivers: net: cpsw: Support ALLMULTI and fix IFF_PROMISC in switch mode
  drivers: net: cpsw: Fix broken loop condition in switch mode
  net: ethtool: Return -EOPNOTSUPP if user space tries to read EEPROM with lengh 0
  stmmac: pci: set default of the filter bins
  net: smc91x: Fix gpios for device tree based booting
  mpls: Allow mpls_gso to be built as module
  mpls: Fix mpls_gso handler.
  r8152: stop submitting intr for -EPROTO
  netfilter: nft_reject_bridge: restrict reject to prerouting and input
  netfilter: nft_reject_bridge: don't use IP stack to reject traffic
  netfilter: nf_reject_ipv6: split nf_send_reset6() in smaller functions
  netfilter: nf_reject_ipv4: split nf_send_reset() in smaller functions
  netfilter: nf_tables_bridge: update hook_mask to allow {pre,post}routing
  drivers/net: macvtap and tun depend on INET
  drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets
  drivers/net: Disable UFO through virtio
  net: skb_fclone_busy() needs to detect orphaned skb
  gre: Use inner mac length when computing tunnel length
  mlx4: Avoid leaking steering rules on flow creation error flow
  net/mlx4_en: Don't attempt to TX offload the outer UDP checksum for VXLAN
  ...
2014-10-31 15:04:58 -07:00
Linus Walleij
451f2334f0 ARM: nomadik: device tree for NHK15 board
This adds a device tree for the Nomadik NHK15 development kit
board.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-31 21:44:32 +01:00
Tony Lindgren
7d2911c438 net: smc91x: Fix gpios for device tree based booting
With legacy booting, the platform init code was taking care of
the configuring of GPIOs. With device tree based booting, things
may or may not work depending what bootloader has configured or
if the legacy platform code gets called.

Let's add support for the pwrdn and reset GPIOs to the smc91x
driver to fix the issues of smc91x not working properly when
booted in device tree mode.

And let's change n900 to use these settings as some versions
of the bootloader do not configure things properly causing
errors.

Reported-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31 15:54:18 -04:00
Linus Torvalds
4f080f05e6 Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6
Pull documentation fixes from Jonathan Corbet:
 "So this is my first pull request since I rashly agreed to look after
  the documentation subtree.  It contains some typo fixes, a few minor
  documentation improvements, and, most importantly, fixes for a couple
  of build problems in various bits of sample code.

  I fully intend to start sending pull requests with signed tags.
  However, due to poor planning on my part and the general obnoxiousness
  of life, I'm 2000 miles away from my private key which is sitting on a
  powered-down machine.  This should be fixed before my next request.

  Meanwhile git.lwn.net is a machine under my control, the patches are
  all trivial, and all have done time in linux-next"

* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6:
  Documentation/SubmittingPatches: Reported-by tags and permission
  Documentation: remove outdated references to the linux-next wiki
  Documentation: Restrict TSC test code to x86
  doc: kernel-parameters.txt: Add ide-generic.probe-mask
  vdso: don't require 64-bit math in standalone test
  Documentation: Add CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF case
  Documentation: Add default kmemleak off case in kernel-parameters.txt
  Docs: Document that the sticky bit is understood by hugetlbfs
  DocBook: Reduce noise from make cleandocs
  Documentation: fix vdso_standalone_test_x86 on 32-bit
  Documentation: dt-bindings: Explain order in patch series
  Documentation/ABI/testing/sysfs-ibft: fix a typo
2014-10-31 11:55:40 -07:00
Dmitry Torokhov
e55a336698 Revert "Input: i8042 - disable active multiplexing by default"
This reverts commit 68da166491.

It turns out that the assertion about scope of regressions due to
always keeping keyboard controller in legacy mode was proven wrong.
There are laptops, such as Clevo W650SH, that only have internal
touchpad (no external PS/2 ports), that require active multiplexing
mode to switch the touchpad (Elantech) into native mode instead of
basic PS/2 emulation.

Reported-by: Roel Aaij <roel.aaij@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-31 09:35:53 -07:00
Peter Griffin
4b171b3d3b reset: sti: Document sti-picophyreset controllers bindings.
Add DT bindings documentation for sti-picophyreset controller.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-10-31 13:00:38 +01:00
Naveen Krishna Ch
f5e127cd5e clk: samsung: exynos7: add clocks for RTC block
Add clock support for the RTC block in Exynos7.

Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31 10:45:52 +01:00
Naveen Krishna Ch
6d0c8c723f clk: samsung: exynos7: add clocks for MMC block
Exynos7 supports 3 MMC channels, add the MMC gate clocks to
support them.

Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31 10:45:51 +01:00
Naveen Krishna Ch
532abc3a4a clk: samsung: add initial clock support for Exynos7 SoC
Add initial clock support for Exynos7 SoC which is required
to bring up platforms based on Exynos7.

Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Reviewed-by: Thomas Abraham <thomas.ab@samsung.com>
Tested-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-31 10:45:47 +01:00
Guenter Roeck
06745729c4 dsa: Add new optional devicetree property to describe EEPROM size
The dsa core now supports reading from and writing to a switch EEPROM
if connected. Describe optional devicetree property indicating that
an EEPROM is present and its size.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30 14:54:11 -04:00
Chanwoo Choi
6233fe3804 clk: samsung: Document binding for Exynos4415 clock controller
This patch adds DT binding documentation for Exynos4415 SoC system
clock controllers.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-10-30 19:53:03 +01:00
Jonathan Richardson
7cfdaddc4d dt-bindings: Document Broadcom Cygnus SoC and clocks
Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
Tested-by: Jonathan Richardson <jonathar@broadcom.com>
Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Scott Branden <sbranden@broadcom.com>
2014-10-30 11:05:55 -07:00
Linus Torvalds
94712927d0 sound fixes for 3.18-rc3
Although the diffstat looks scary, it's just because of the removal of
 the dead code (s6000), thus it must not affect anything serious.
 Other than that, all small fixes.  The only core fix is zero-clear for
 a PCM compat ioctl.  The rest are driver-specific, bebob, sgtl500,
 adau1761, intel-sst, ad1889 and a few HD-audio quirks as usual.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUURWjAAoJEGwxgFQ9KSmkWiEP/R2n/jskNVH1Pk/9BwTpo+ND
 YsH1Ysni5+QfiEh4R+FJJxnaBS2nbXYGbCMG9qIoaEmkMkujMn7eoyq0QLoZVkVs
 tB4rEFkPwPKpZJjsPEwzgOk06FQR04qU2PbovA5dijC0mtLaaVwp5Hd/Xfvv09vQ
 ts3y+yA4Y7DpdIwJ727c9aeEALuZAdfAgqS755+ZDBXbY0uefEIXfV2eSj4Fuuis
 nWjMPdlfLAaBrwOa+h62mHkzw5jARGvEWlPC8Q9v+Z1liAJa+aDI1Pj7Ctr4NaFI
 DL3I5UigETjPAll90z9F0qdwV6Z8kmppw1uoZntt2OwFfyo37675hJX8AbHTjik8
 BXVKwQeJkgwufHgHQBen80MQh59Whn34dJ9qKYHM5Xa+v/ex2ACxeJQIa3+1nxcd
 jbfszGlI2PZNZCNtYBxtcSpiXu0Sdfhfy16v4V6CCZ6kQ9hj7GQm9HrB9NrFAHED
 zWFbCf5ouu5M3i2j6VKLGmP0f6I/Mxb+4Rvw0KzlKKnM1eqFK/Ttqn0aHJXaTEb9
 AoHbzlAgES1Lo8Ftg/xbX4J8NcAMQRkDUYpiSELFc/+LQ3rNU+Bcgf5aWa/rVnII
 PnClako0XPSQcRvvhVOMcJzuj0YLCr5TMtmlbDCDgPm39pgCkUoKhnJHeJ/IbCRG
 Ixk33L41prRJF3Yuw1CJ
 =1RIC
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Although the diffstat looks scary, it's just because of the removal of
  the dead code (s6000), thus it must not affect anything serious.

  Other than that, all small fixes.  The only core fix is zero-clear for
  a PCM compat ioctl.  The rest are driver-specific, bebob, sgtl500,
  adau1761, intel-sst, ad1889 and a few HD-audio quirks as usual"

* tag 'sound-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Add workaround for CMI8888 snoop behavior
  ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat mode
  ALSA: bebob: Uninitialized id returned by saffirepro_both_clk_src_get
  ALSA: hda/realtek - New SSID for Headset quirk
  ALSA: ad1889: Fix probable mask then right shift defects
  ALSA: bebob: fix wrong decoding of clock information for Terratec PHASE 88 Rack FW
  ALSA: hda/realtek - Update restore default value for ALC283
  ALSA: hda/realtek - Update restore default value for ALC282
  ASoC: fsl: use strncpy() to prevent copying of over-long names
  ASoC: adau1761: Fix input PGA volume
  ASoC: s6000: remove driver
  ASoC: Intel: HSW/BDW only support S16 and S24 formats.
  ASoC: sgtl500: Document the required supplies
2014-10-30 09:11:38 -07:00
Alexandre Courbot
2071d0968e Documentation: gpio: guidelines for bindings
Now that ACPI supports named GPIO properties, either through ACPI 5.1 or
the per-driver ACPI GPIO mappings, we can be more narrow about the way
GPIOs should be specified in Device Tree bindings.

This patch updates the GPIO DT bindings documentation to highlight the
following rules for new GPIO bindings:

- All new bindings must have a meaningful name (e.g. the "gpios"
  property must not be used)
- The only suffix allowed is "-gpios", no matter the number of
  descriptors in the property
- GPIOs can only be grouped under the same property when they serve the
  same purpose, a case that should remain exceptional (e.g. bit-banged
  data lines).

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-30 16:41:47 +01:00
Takashi Iwai
67faa6ebd7 ALSA: doc: Fix missing "I" for kerneldoc inclusion
Fixes: 90446d0746 ('ALSA: doc: Add missing headers and compress stuff to alsa-driver-api.tmpl')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 15:42:33 +01:00
Takashi Iwai
438f4e2801 ALSA: doc: Add ASoC codes into API documentation
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-30 12:44:00 +01:00
Mauro Carvalho Chehab
a47959fbd5 [media] Documentation: FE_SET_PROPERTY requires R/W
FE_SET_PROPERTY requires to open the devnode on R/W mode, or
otherwise it will fail. Document it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30 09:06:23 -02:00
Joe Perches
1f33c41c03 seq_file: Rename seq_overflow() to seq_has_overflowed() and make public
The return values of seq_printf/puts/putc are frequently misused.

Start down a path to remove all the return value uses of these
functions.

Move the seq_overflow() to a global inlined function called
seq_has_overflowed() that can be used by the users of seq_file() calls.

Update the documentation to not show return types for seq_printf
et al.  Add a description of seq_has_overflowed().

Link: http://lkml.kernel.org/p/848ac7e3d1c31cddf638a8526fa3c59fa6fdeb8a.1412031505.git.joe@perches.com

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Joe Perches <joe@perches.com>
[ Reworked the original patch from Joe ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-29 20:26:06 -04:00
Erik Kline
7fd2561e4e net: ipv6: Add a sysctl to make optimistic addresses useful candidates
Add a sysctl that causes an interface's optimistic addresses
to be considered equivalent to other non-deprecated addresses
for source address selection purposes.  Preferred addresses
will still take precedence over optimistic addresses, subject
to other ranking in the source address selection algorithm.

This is useful where different interfaces are connected to
different networks from different ISPs (e.g., a cell network
and a home wifi network).

The current behaviour complies with RFC 3484/6724, and it
makes sense if the host has only one interface, or has
multiple interfaces on the same network (same or cooperating
administrative domain(s), but not in the multiple distinct
networks case.

For example, if a mobile device has an IPv6 address on an LTE
network and then connects to IPv6-enabled wifi, while the wifi
IPv6 address is undergoing DAD, IPv6 connections will try use
the wifi default route with the LTE IPv6 address, and will get
stuck until they time out.

Also, because optimistic nodes can receive frames, issue
an RTM_NEWADDR as soon as DAD starts (with the IFA_F_OPTIMSTIC
flag appropriately set).  A second RTM_NEWADDR is sent if DAD
completes (the address flags have changed), otherwise an
RTM_DELADDR is sent.

Also: add an entry in ip-sysctl.txt for optimistic_dad.

Signed-off-by: Erik Kline <ek@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 15:11:36 -04:00
Eric Dumazet
dca145ffaa tcp: allow for bigger reordering level
While testing upcoming Yaogong patch (converting out of order queue
into an RB tree), I hit the max reordering level of linux TCP stack.

Reordering level was limited to 127 for no good reason, and some
network setups [1] can easily reach this limit and get limited
throughput.

Allow a new max limit of 300, and add a sysctl to allow admins to even
allow bigger (or lower) values if needed.

[1] Aggregation of links, per packet load balancing, fabrics not doing
 deep packet inspections, alternative TCP congestion modules...

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yaogong Wang <wygivan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29 15:05:15 -04:00