Commit graph

27,507 commits

Author SHA1 Message Date
Simon Danner
03ebb7d03f Documentation: update links in Changes
Update broken links in Changes

Signed-off-by: Simon Danner <danner.simon@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-09 10:35:40 +02:00
Heiko Carstens
369e8c3553 Documentation/kprobes: add s390 to list of supported architectures
s390 supports kprobes since 2006 but is missing in the list of
architectures that support kprobes.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-09 08:53:27 +02:00
Nishanth Menon
0e0cb99d17 ARM: OMAP2+: board-generic: add support for AM57xx family
AM57xx processor family are variants of DRA7 family of processors and
targetted at industrial and non-automotive applications.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-08 17:03:11 -07:00
Srinivas Pandruvada
acc82342f6 PM / sleep: Update test_suspend option documentation
Updated documentation to add freeze mode and repeat capability.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09 01:48:02 +02:00
Alexey Charkov
ae38273524 tty: vt8500_serial: add support for UART in WM8880 chips
Newer WonderMedia chips introduced another flag in the UART line control
register, which controls whether RTS/CTS signalling should be handled in
the driver or by the hardware itself.

This patch ensures that the kernel can control RTS/CTS (including
disabling it altogether) by forcing this flag to software mode on affected
chips (only WM8880 so far).

Also remove the redundant copy of the binding doc, while we are here.

Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08 16:29:08 -07:00
Jingchang Lu
7d480ef776 doc: dt-binding: of-serial: add Freescale 64-byte FIFO mode uart binding
This add the 64-byte FIFO mode device tree binding for Freescale DUART.

Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08 16:29:08 -07:00
Peter Hurley
db106df32d serial: Fix send_xchar() handlers
START_CHAR() & STOP_CHAR() can be disabled if set to '\0'
(__DISABLED_CHAR).  UART drivers which define a send_xchar()
handler must not transmit __DISABLED_CHAR.

Document requirement.

Affected drivers:
sunsab
sunhv

cc: David S. Miller <davem@davemloft.net>
cc: <sparclinux@vger.kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08 16:22:42 -07:00
Peter Hurley
a6eec92ec0 Revert "serial: uart: add hw flow control support configuration"
This reverts commit 06aa82e498.
This commit purports to enable auto CTS flow control for the 8250
UART driver. However, the 8250 UART driver already supports auto
CTS flow control via UART_CAP_AFE and UART_CAP_EFR. Indeed, this
patch introduces another DT attribute for which an existing firmware
flag already exists ("auto-flow-control"). Furthermore, the use of
UPF_HARD_FLOW requires the UART driver to define .throttle and
.unthrottle methods, neither of which are defined for the 8250 UART
driver (which will result in a NULL ptr dereference). Finally, this patch
supposes to fix existing bugs in the serial core for auto CTS-enabled
hardware, but does not include the class of hardware for which these
bugs exist.

CC: Murali Karicheri <m-karicheri2@ti.com>
CC: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08 16:21:35 -07:00
Dan Murphy
1c24622572 Input: add support for the DRV2667 haptic driver
Adding support for the DRV2667 haptic driver.  This device has the ability
to store vibration patterns in RAM and execute them once the GO bit is set.

The initial driver sets a basic waveform in the first waveform sequence and
will play the waveform when the GO bit is set and will continously play the
waveform until the GO bit is unset.

Data sheet is here: http://www.ti.com/product/drv2667

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-08 16:16:23 -07:00
Yegor Yefremov
75e4239b59 Documentation: serial: fix header path
RS485 related structure will be defined in user space API
header.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08 16:10:01 -07:00
Kever Yang
fc1b0e2aa3 Documentation: dt-bindings: add dt binding info for dwc2 dr_mode
Indicate that the generic dr_mode binding should be used for dwc2.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08 15:43:27 -07:00
Kever Yang
3675029a11 Documentation: dt-bindings: add dt binding info for Rockchip dwc2
This add necessary dwc2 binding documentation for Rockchip socs:
rk3066, rk3188 and rk3288

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08 15:41:14 -07:00
Alexander Shiyan
62b0a1b3e7 serial: clps711x: Use mctrl_gpio helpers for handling modem signals
CLPS711X serial driver uses the system wide registers to control the
modem signals. Now gpio-syscon driver can be used for this purposes.
mctrl_gpio helpers allow us to create GPIO bindings for any of modem/tty
control signals that extends the functionality of the driver.
This patch makes such change.

This change does not break any current DT bindings, since DT support
for this platform is not introduced yet.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08 15:35:03 -07:00
Alan Stern
b6089f19fe USB: document the 'u' flag for usb-storage quirks parameter
Commit d24d481b7d (usb-storage: Modify and export adjust_quirks so
that it can be used by uas) added the 'u' flag to the quirks module
parameter for usb-storage, but neglected to update the
documentation.  This patch adds the documentation.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>  # 3.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08 14:33:09 -07:00
Felipe Balbi
f7cc38b16e Linux 3.17-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUDOW+AAoJEHm+PkMAQRiGOXYH/00TPKm8PdM5cXXG2YYYv9eT
 W99K7KD2i0/qiVtlGgjjvB7fO3K0HcZusTd2jmVd8IWntXvauq7Zpw5YZkjwu4KX
 Y1HCwwCd2aw0FoqgrJhNP3+j5Cr1BD/HLtbffjCe+A3tppOIis4Bwt2wJOoYlXpS
 hU9Jxxc4lcRo8YKbffouDo7PIneWeJy8N+WGpUR5BfJIEK0ZZtCUqn3/3WLX4FYu
 fE6uiF/bACTpKXU/mo4dDbhZp439H/QdwQc9B0F8+8CBDMXKaNHrPV7kN36T2SWa
 fD4boikTsi/yh9Ks1fvHbvNq2N0ihoMnja+vLRyvjAcAQv2fKG3OZtYgFWSdghU=
 =Xknd
 -----END PGP SIGNATURE-----

Merge tag 'v3.17-rc4' into next

Merge Linux 3.17-rc4 here so we have all the latest
fixes on next too. This also cleans up a few conflicts
when applying patches.

Signed-off-by: Felipe Balbi <balbi@ti.com>

Conflicts:
	drivers/usb/gadget/Makefile
	drivers/usb/gadget/function/Makefile
	drivers/usb/gadget/legacy/Makefile
	drivers/usb/phy/phy-samsung-usb.h
2014-09-08 14:39:01 -05:00
Gaurav Minocha
b9c74fd7d2 of: Documentation regarding attaching OF Selftest testdata
This patch add a document that explains how the selftest test data is
dynamically attached into the live device tree irrespective of the
machine's architecture.

Signed-off-by: Gaurav Minocha <gaurav.minocha.os@gmail.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-09-08 15:57:25 +01:00
Zi Shen Lim
e54bcde3d6 arm64: eBPF JIT compiler
The JIT compiler emits A64 instructions. It supports eBPF only.
Legacy BPF is supported thanks to conversion by BPF core.

JIT is enabled in the same way as for other architectures:

	echo 1 > /proc/sys/net/core/bpf_jit_enable

Or for additional compiler output:

	echo 2 > /proc/sys/net/core/bpf_jit_enable

See Documentation/networking/filter.txt for more information.

The implementation passes all 57 tests in lib/test_bpf.c
on ARMv8 Foundation Model :) Also tested by Will on Juno platform.

Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-09-08 14:39:21 +01:00
David S. Miller
eb84d6b604 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2014-09-07 21:41:53 -07:00
Linus Torvalds
b531f5dd9c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix skb leak in mac802154, from Martin Townsend

 2) Use select not depends on NF_NAT for NFT_NAT, from Pablo Neira
    Ayuso

 3) Fix union initializer bogosity in vxlan, from Gerhard Stenzel

 4) Fix RX checksum configuration in stmmac driver, from Giuseppe
    CAVALLARO

 5) Fix TSO with non-accelerated VLANs in e1000, e1000e, bna, ehea,
    i40e, i40evf, mvneta, and qlge, from Vlad Yasevich

 6) Fix capability checks in phy_init_eee(), from Giuseppe CAVALLARO

 7) Try high order allocations more sanely for SKBs, specifically if a
    high order allocation fails, fall back directly to zero order pages
    rather than iterating down one order at a time.  From Eric Dumazet

 8) Fix a memory leak in openvswitch, from Li RongQing

 9) amd-xgbe initializes wrong spinlock, from Thomas Lendacky

10) RTNL locking was busted in setsockopt for anycast and multicast, fix
    from Sabrina Dubroca

11) Fix peer address refcount leak in ipv6, from Nicolas Dichtel

12) DocBook typo fixes, from Masanari Iida

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits)
  ipv6: restore the behavior of ipv6_sock_ac_drop()
  amd-xgbe: Enable interrupts for all management counters
  amd-xgbe: Treat certain counter registers as 64 bit
  greth: moved TX ring cleaning to NAPI rx poll func
  cnic : Cleanup CONFIG_IPV6 & VLAN check
  net: treewide: Fix typo found in DocBook/networking.xml
  bnx2x: Fix link problems for 1G SFP RJ45 module
  3c59x: avoid panic in boomerang_start_xmit when finding page address:
  netfilter: add explicit Kconfig for NETFILTER_XT_NAT
  ipv6: use addrconf_get_prefix_route() to remove peer addr
  ipv6: fix a refcnt leak with peer addr
  net-timestamp: only report sw timestamp if reporting bit is set
  drivers/net/fddi/skfp/h/skfbi.h: Remove useless PCI_BASE_2ND macros
  l2tp: fix race while getting PMTU on PPP pseudo-wire
  ipv6: fix rtnl locking in setsockopt for anycast and multicast
  VMXNET3: Check for map error in vmxnet3_set_mc
  openvswitch: distinguish between the dropped and consumed skb
  amd-xgbe: Fix initialization of the wrong spin lock
  openvswitch: fix a memory leak
  netfilter: fix missing dependencies in NETFILTER_XT_TARGET_LOG
  ...
2014-09-07 19:56:38 -07:00
Paul E. McKenney
37fe5f0e27 documentation: Add verbiage on RCU-tasks stall warning messages
This commit documents RCU-tasks stall warning messages and also describes
when to use the new cond_resched_rcu_qs() API.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07 16:27:28 -07:00
Paul E. McKenney
52db30ab23 rcu: Add stall-warning checks for RCU-tasks
This commit adds a ten-minute RCU-tasks stall warning.  The actual
time is controlled by the boot/sysfs parameter rcu_task_stall_timeout,
with values less than or equal to zero disabling the stall warnings.
The default value is ten minutes, which means that the tasks that have
not yet responded will get their stacks dumped every ten minutes, until
they pass through a voluntary context switch.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07 16:27:26 -07:00
Paul E. McKenney
38706bc5a2 rcutorture: Add callback-flood test
Although RCU is designed to handle arbitrary floods of callbacks, this
capability is not routinely tested.   This commit therefore adds a
cbflood capability in which kthreads repeatedly registers large numbers
of callbacks.  One such kthread is created for each four CPUs (rounding
up), and the test may be controlled by several cbflood_* kernel boot
parameters, which control the number of bursts per flood, the number
of callbacks per burst, the time between bursts, and the time between
floods.  The default values are large enough to exercise RCU's emergency
responses to callback flooding.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: David Miller <davem@davemloft.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-07 16:24:48 -07:00
Paul E. McKenney
2456d2a617 memory-barriers: Fix description of 2-legged-if-based control dependencies
Sad to say, current compilers really will hoist identical stores from both
branches of an "if" statement to precede the conditional.  This commit
therefore updates the description of control dependencies to reflect this
ugly reality.

Reported-by: Pranith Kumar <bobby.prani@gmail.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07 16:15:53 -07:00
Paul E. McKenney
efdcd51a4d memory-barriers: Retain barrier() in fold-to-zero example
The transformation in the fold-to-zero example incorrectly omits the
barrier() directive.  This commit therefore adds it back in.

Reported-by: Pranith Kumar <pranith@gatech.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07 16:15:52 -07:00
Paul E. McKenney
5646f7acc9 memory-barriers: Fix control-ordering no-transitivity example
The control-ordering example demonstrating lack of transitivity had
multiple problems.  This commit fixes them.

Reported-by: Nikolay Samofatov <nikolay.samofatov@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-07 16:15:41 -07:00
Sudip Mukherjee
7e0dae61e2 Documentation: new page link in SubmittingPatches
new link for - How to piss off a Linux kernel subsystem maintainer

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07 15:21:13 -07:00
Paul Bolle
731d5cca82 Documentation: NFS/RDMA: Document separate Kconfig symbols
The NFS/RDMA Kconfig symbol was split into separate options for client
and server in commit 2e8c12e1b7 ("xprtrdma: add separate Kconfig
options for NFSoRDMA client and server support").

Update the documentation to reflect this split.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "J. Bruce Fields" <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07 15:21:13 -07:00
Masanari Iida
0024d6e9fd Documentation: misc-devices: Rename freefall.c from hpfall.c in lis2lv02d
hpfall.c was renamed to freefall.c in 3.16, but this file still refer to
hpfall.c instead of freefall.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07 15:21:13 -07:00
Jose Manuel Alarcon Roldan
257d6ef4aa Documentation: i2c: rename variable "register" to "reg"
The example code provided with the i2c device interface documentation
won't compile since it uses the reserved word "register" to name a
variable.

The compiler fails with this error message:

 error: expected identifier or '(' before '=' token
   __u8 register = 0x20; /* Device register to access */
                 ^

Rename the variable "register" to simply "reg" in the example code.

Another couple of typos has been fixed as well.
[Change "! =" to "!=".]

Signed-off-by: Jose Alarcon Roldan <jose.alarcon.roldan@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07 15:21:13 -07:00
Rob Jones
77be4daf4e Documentation: seq_file: Document seq_open_private(), seq_release_private()
Despite the fact that these functions have been around for years, they
are little used (only 15 uses in 13 files at the preseht time) even
though many other files use work-arounds to achieve the same result.

By documenting them, hopefully they will become more widely used.

Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07 15:21:13 -07:00
Ramakrishna Pallala
a8adcc9012 power_supply: Add boot and calibration attributes
Usually PMIC's come with coulomb counting mechanism which can be
used to implement a Fuel Gauginig solution in Software itself.
One of key input to these SW Fuel Gauge solutioons is the boot up
parameters like boot voltage and boot current.

This patch adds the VOLTAGE_BOOT and CURRENT_BOOT power supply attributes
to report bootup voltage and current.

This patch also adds CALIBRATE power supply attribute which useful is
for calibrating the battery/coulomb counter.

Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-09-06 21:05:04 +02:00
Mark Brown
dec38b5ce6 regulator: isl9305: Add Intersil ISL9305/H driver
The ISL9305 and ISL9305H are mini-PMICs offering two DCDC regulators and
two LDO regulators. While there are some register differences between them
these do not affect the current Linux driver as the relevant features are
not yet supported.

Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-06 12:43:05 +01:00
Simon Horman
fb0eee2f14 clocksource: sh_tmu: Document r8a7779 binding
In general Renesas hardware is not documented to the extent
where the relationship between IP blocks on different SoCs can be assumed
although they may appear to operate the same way. Furthermore the
documentation typically does not specify a version for individual
IP blocks. For these reasons a convention of using the SoC name in place
of a version and providing SoC-specific compat strings has been adopted.

Although not universally liked this convention is used in the bindings
for a number of drivers for Renesas hardware. The purpose of this patch is
to update the Renesas R-Car Timer Unit (TMU) driver to follow this
convention.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---
* I plan to follow up with a patch patch to use the new binding in the
  dtsi files for the r8a7779 SoC.
commit 471269b790aec03385dc4fb127ed7094ff83c16d

v2
* Suggestions by Mark Rutland and Sergei Shtylyov
  - Compatible strings should be "one or more" not "one" of those listed
  - Describe the generic binding as covering any MTU2 device
  - Re-order compat strings from most to least specific

v3
* Suggested by Laurent Pinchart
  - Reword in keeping with a similar though more extensive patch for CMT
2014-09-06 10:20:53 +09:00
Simon Horman
ffd24a543a clocksource: sh_mtu2: Document r7s72100 binding
In general Renesas hardware is not documented to the extent
where the relationship between IP blocks on different SoCs can be assumed
although they may appear to operate the same way. Furthermore the
documentation typically does not specify a version for individual
IP blocks. For these reasons a convention of using the SoC name in place
of a version and providing SoC-specific compat strings has been adopted.

Although not universally liked this convention is used in the bindings
for a number of drivers for Renesas hardware. The purpose of this patch is
to update the Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2) driver
to follow this convention.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---
* I plan to follow up with a patch patch to use the new binding in the
  dtsi files for the r7s72100 SoC.

v2
* Suggestions by Mark Rutland and Sergei Shtylyov
  - Compatible strings should be "one or more" not "one" of those listed
  - Describe the generic binding as covering any MTU2 device
  - Re-order compat strings from most to least specific

v3
* Suggested by Laurent Pinchart
  - Reword compat documentation for consistency with a more extensive
    CMT change
2014-09-06 10:20:09 +09:00
Simon Horman
01fe3aaa3a clocksource: sh_cmt: Document SoC specific bindings
In general Renesas hardware is not documented to the extent
where the relationship between IP blocks on different SoCs can be assumed
although they may appear to operate the same way. Furthermore the
documentation typically does not specify a version for individual
IP blocks. For these reasons a convention of using the SoC name in place
of a version and providing SoC-specific compat strings has been adopted.

Although not universally liked this convention is used in the bindings for
a number of drivers for Renesas hardware. The purpose of this patch is to
update the Renesas R-Car Compare Match Timer (CMT) driver to follow this
convention.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---
* I plan to follow up with patches to use these new bindings in the
  dtsi files for the affected SoCs.

v2
* Reorder compat entries so more-specific entries and their fallbacks
  are grouped with the fallback entry coming last.
* Explicitly document fallback

v3
* Avoid circular dependency in documentation of fallback
  behaviour of renesas,cmt-48-gen2
* Use consistent case for SoC names in compat string descriptions
2014-09-06 10:14:12 +09:00
Willem de Bruijn
18a47e6d8a net-timestamp: fix allocation error in test
A buffer is incorrectly zeroed to the length of the pointer. If
cfg_payload_len < sizeof(void *) this can overwrites unrelated memory.
The buffer contents are never read, so no need to zero.

Fixes: 8fe2f761ca ("net-timestamp: expand documentation")

Reported-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 17:31:03 -07:00
Arnd Bergmann
6ce041aba3 First batch of AT91 drivers for 3.18:
- reset, poweroff and ram drivers are moved to their proper
   location instead of being in mach-at91 directory. They now use
   the appropriate frameworks.
 - big amount of removal of these machine specific drivers and use
   of the newly created drivers. This lead to an overhaul of the setup.c AT91
   startup code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJUBKc2AAoJEAf03oE53VmQ0BkIAL1t9foWRqNmU5EaSDKvZRQ2
 6pN5995VeU05cmK5v5FwsxDAoGulo0l7klegZiA+dspUfNUPzNQ87dU/xlfCsQiJ
 rJvOxE1NYNUtM6IcnKw+JU8s7RoPl1mhgh5KXdFckjgwwEmAiAoX4Tdx15gcRGaE
 3BEYlNGDudqMaQ+r/NE1IRti5cExQKiEBwktSqZC3eVMMfJ4niaCYy69t6z4hWds
 nbX6FQd6mHzxW8uYd/C85Blb5IhktFp0lgIChAYRXRdVRcMrTSHVhs0x6zh30o3T
 n2xeWgad0qmSsZCSXf59UT9MWK7woLWBUTUSEkgGWksM91om6EC9FJS4zcijp4E=
 =MqpU
 -----END PGP SIGNATURE-----

Merge tag 'at91-drivers' of git://github.com/at91linux/linux-at91 into next/drivers

Merge "First batch of AT91 drivers for 3.18" from Nicolas Ferre:

- reset, poweroff and ram drivers are moved to their proper
  location instead of being in mach-at91 directory. They now use
  the appropriate frameworks.
- big amount of removal of these machine specific drivers and use
  of the newly created drivers. This lead to an overhaul of the setup.c AT91
  startup code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* tag 'at91-drivers' of git://github.com/at91linux/linux-at91: (31 commits)
  power: reset: at91-poweroff: fix wakeup status register index
  ARM: at91/power/reset: fix Kconfig "depends on" directive
  ARM: at91: fix ramc standby function registration
  ARM: at91: Remove rstc and shdwc headers
  ARM: at91: Remove rstc and shdwnc global base addresses
  ARM: at91/pm: Remove show_reset_status function
  ARM: at91: Remove poweroff code
  ARM: at91: Register the poweroff driver
  ARM: at91: Remove poweroff DT probing
  ARM: at91: Remove reset code from the machine code
  ARM: at91: Call at91_register_devices in the board files
  ARM: at91: Probe the reset driver
  ARM: at91/soc: Introduce register_devices callback
  ARM: at91: Remove the old-style reset probing
  ARM: at91: Rework ramc mapping code
  ARM: at91: setup: Switch to pr_fmt
  ARM: at91: remove old irq material
  ARM: at91: make use of the new AIC driver for dt enabled boards
  ARM: at91: enclose at91_aic_xx calls in IS_ENABLED(CONFIG_OLD_IRQ_AT91) blocks
  ARM: at91: introduce OLD_IRQ_AT91 Kconfig option
  ...
2014-09-05 22:26:40 +02:00
Bjorn Helgaas
a2351efeb3 Merge branches 'pci/misc', 'pci/pm', 'pci/host-designware', 'pci/host-imx6', 'pci/host-keystone', 'pci/host-tegra' and 'pci/host-xilinx' into next
* pci/misc:
  PCI/AER: Make <linux/aer.h> standalone includable
  PCI: Remove unnecessary variable in pci_add_dynid()

* pci/pm:
  PCI/PM: Allow PCI devices to be put into D3cold during system suspend
  PCI/PM: Drop unused runtime PM support code for PCIe ports

* pci/host-designware:
  PCI: designware: Check private_data validity in single place
  PCI: designware: Remove pci_assign_unassigned_resources() from dw_pcie_host_init()
  PCI: designware: Use pci_create_root_bus() instead of pci_scan_root_bus()
  PCI: designware: Parse bus-range property from devicetree
  PCI: designware: Add support for v3.65 hardware

* pci/host-imx6:
  PCI: imx6: Probe in module_init(), not fs_initcall()
  PCI: designware: Remove pci_assign_unassigned_resources() from dw_pcie_host_init()
  PCI: designware: Use pci_create_root_bus() instead of pci_scan_root_bus()
  PCI: designware: Parse bus-range property from devicetree
  PCI: imx6: Put LTSSM in "Detect" state before disabling it
  MAINTAINERS: Add Lucas Stach as co-maintainer for i.MX6 PCI driver
  PCI: designware: Add support for v3.65 hardware

* pci/host-keystone:
  PCI: keystone: Add TI Keystone PCIe driver
  PCI: designware: Add support for v3.65 hardware

* pci/host-tegra:
  PCI: tegra: Implement a proper resource hierarchy
  PCI: tegra: Add missing cleanup in error path and tegra_msi_teardown_irq()
  resources: Add device-managed request/release_resource()

* pci/host-xilinx:
  PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driver

Conflicts:
	drivers/pci/host/Kconfig
	drivers/pci/host/Makefile
2014-09-05 10:57:20 -06:00
Yoshihiro Shimoda
630a84a181 usb: renesas_usbhs: Add device tree bindings documentation
Document the device tree bindings for the Renesas USBHS controller.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05 10:59:26 -05:00
Peter Griffin
f903144926 usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
This patch documents the device tree documentation required for
the ST usb3 controller glue layer found in STiH407 devices.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05 10:52:49 -05:00
Linus Torvalds
8e6353bba3 regulator: Documentation fixes for v3.17
All the fixes people have found for the regulator API have been
 documentation fixes, avoiding warnings while building the kerneldoc,
 fixing some errors in one of the DT bindings documents and fixing some
 typos in the header.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUCYlSAAoJELSic+t+oim9yvwP/2+v1KcVT+NHwUpNi4mbj4Zl
 1/A3Pa9fsVrZ6mVMPvGHpa2ecdLRoauiLkpRKSFP85ngOtwb1p9YTVbY0FUO84iW
 gSBfVBxsLmWw2pSK18lbcHkq1DLchMyF6bXn25BVQjR0xkrEZYHReCHXobcxAQpN
 RcVAZIE849iJ46yNhmI1RfXAcJiH93RY9BPrkbO7DWEX6UNml5xkAi4j3TUvWAuV
 fmjnHuzOgKkTL/ixj+clW/LEKwvk3hboAWA1mIcl9QvRaUDmfx4CmirKEgznu9uT
 ImYKKOqeB/z+4XzhHZTkdVg5suQSV8WDm4bv+TNR6lBlCMHdKBZMh4l/Lwff/a41
 pDLDzJSKunwxxOzsHmcAD/PI4kO3sO4HZS1XhzAHklqKsPHjX++BGcKoUFxYh8Iz
 V5ZXvGRdX8Vqe1rF2mJWZ+lslx7wZ/pDfBslt6Y6V7CEmMN2cMX6flVPQ+g872Jt
 pYdU91ujNd9Fb9rjzCnHx6+5B4LdZm0+RxHp51cF6DMwRCjUgtmHvTzSGuoO8bpH
 kb/QhCO2x8fVZZzt+x4j0nSooe1vxTIbg7y/vrW5pJwwixfXMtA6rxhpd8UyssU7
 IgaW8wwNJDkqOPl4Ho7MOB+ZnUTmKKcyKABQNmZ+eWzhCUpnJLISh0PvHYq7Bq1R
 8Me7NhTpoQmZjXoZ/i5p
 =mZk2
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator documentation fixes from Mark Brown:
 "All the fixes people have found for the regulator API have been
  documentation fixes, avoiding warnings while building the kerneldoc,
  fixing some errors in one of the DT bindings documents and fixing some
  typos in the header"

* tag 'regulator-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: fix kernel-doc warnings in header files
  regulator: Proofread documentation
  regulator: tps65090: Fix tps65090 typos in example
2014-09-05 08:09:02 -07:00
Linus Torvalds
5e6c72396c GPIO fixes for the v3.17 series:
- Some documentation sync
 - Resource leak in the bt8xx driver
 - Again fix the way varargs are used to handle the
   optional flags on the gpiod_* accessors. Now hopefully
   nailed the entire problem.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUCXZqAAoJEEEQszewGV1zn5kP/19NJ4N7jUpaRIiL9yVEeOpB
 oKDceHRu4jRddgNndaAPjON+PwMLgYft4uDvPeY1ulObjPEPQUg39iFtTCWeJjcT
 Kzi1rhcJB5Qzepw78vcrFLfTPgXnObV1JweGnTtUhpBfbmVuCruSP6Iy2EsPMjR+
 zS1UA6sCe8hevOsVrF+CRCVgWbm1dntOiOsZyjRPXQCyafMv5EyMdaFSIbzIEWsf
 dxEFJ/3iFHtRrA2CUHpfg9vZO+v9rJ39tjRDNt3m0dOQkanys1zseolJUlCiM3Gf
 SnPFXxpxOpW+NyXW/d6wwlSfaJ/4RZ43KCBckHDGsCnEOd2SR+7sln+irwiNQ/gh
 tT0KcEixqT/06Tv1I6mC9JLTBffvqOEU8oMG5OyWNJvjq+WfBhyxo688q/pDURiJ
 Q7kPsFdIvoY5bvkrQFQ46xNnYdNwBKLJIeaJIp+Kf/ScnDMPtxO/DR1LNamb8Cnz
 YarxC1ZJb0OXqlFK3JG55gmjUEp8pnPjAMcMadqALmw4bKMWGvgmYfLp1U56TFZq
 ovQSBiASH0buAlAkdY4L8X12wmj5ScUyvy+3leQz65Xo4vktXZ/vdkjGzaNWMsPC
 o5MSkuUZkb76FuncXI/dicvJNlCe9GHceOfEMgflVZbGI+etDczI9/wDHgylKY9k
 /VeZgli8XiDMo/LNGkch
 =W9J2
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 - some documentation sync
 - resource leak in the bt8xx driver
 - again fix the way varargs are used to handle the optional flags on
   the gpiod_* accessors.  Now hopefully nailed the entire problem.

* tag 'gpio-v3.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: move varargs hack outside #ifdef GPIOLIB
  gpio: bt8xx: fix release of managed resources
  Documentation: gpio: documentation for optional getters functions
2014-09-05 08:04:29 -07:00
Mark Brown
a65c866306 Merge remote-tracking branches 'regulator/fix/doc' and 'regulator/fix/tps65090' into regulator-linus 2014-09-05 10:53:18 +01:00
Marek Roszko
2de5da5771 pinctrl: at91: update for drive strength options and tweaks
The drive strength patched introduced the atmel,sama5d-pinctrl
compatible string. Drive strength is now an option for the
CONFIG bits per pin. Also added note about MULTIDRIVE being
equivalent to open-drain output and added missing "s" at the
end of need everywhere in the bits descriptions.

Signed-off-by: Marek Roszko <mark.roszko@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-05 10:32:48 +02:00
Hannes Frederic Sowa
a9fe8e2994 ipv4: implement igmp_qrv sysctl to tune igmp robustness variable
As in IPv6 people might increase the igmp query robustness variable to
make sure unsolicited state change reports aren't lost on the network. Add
and document this new knob to igmp code.

RFCs allow tuning this parameter back to first IGMP RFC, so we also use
this setting for all counters, including source specific multicast.

Also take over sysctl value when upping the interface and don't reuse
the last one seen on the interface.

Cc: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-04 22:26:14 -07:00
Hannes Frederic Sowa
2f711939d2 ipv6: add sysctl_mld_qrv to configure query robustness variable
This patch adds a new sysctl_mld_qrv knob to configure the mldv1/v2 query
robustness variable. It specifies how many retransmit of unsolicited mld
retransmit should happen. Admins might want to tune this on lossy links.

Also reset mld state on interface down/up, so we pick up new sysctl
settings during interface up event.

IPv6 certification requests this knob to be available.

I didn't make this knob netns specific, as it is mostly a setting in a
physical environment and should be per host.

Cc: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-04 22:26:14 -07:00
Doug Anderson
6e3be9bbea spi/rockchip: Mark DMA as optional
The Rockchip SPI controller works fine without DMA (aside from a few
warnings).  The DMA property even implies this, saying:

  DMA request names should include "tx" and "rx" if present.

Officially mark the properties as optional.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-04 23:54:15 +01:00
Lucas Stach
4f2ebe0059 PCI: designware: Parse bus-range property from devicetree
This allows to explicitly specify the covered bus numbers in the
devicetree, which will come in handy once we see a SoC with more than one
PCIe host controller instance.

Previously the driver relied on the behavior of pci_scan_root_bus() to fill
in a range of 0x00-0xff if no valid range was found.  We fall back to the
same range if no valid DT entry was found to keep backwards compatibility,
but now do it explicitly.

[bhelgaas: use %pR in error message to avoid duplication]
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Mohit Kumar <mohit.kumar@st.com>
2014-09-04 14:58:48 -06:00
Murali Karicheri
0c4ffcfe1f PCI: keystone: Add TI Keystone PCIe driver
The Keystone PCIe controller is based on v3.65 version of the Designware
h/w.  Main differences are:

    1. No ATU support
    2. Legacy and MSI IRQ functions are implemented in application register
       space
    3. MSI interrupts are multiplexed over 8 IRQ lines to the Host side.

All of the application register space handing code is organized into
pci-keystone-dw.c and the functions are called from pci-keystone.c to
implement PCI controller driver.  Also add necessary DT documentation and
update the MAINTAINERS file for the driver.

[bhelgaas: spelling and whitespace fixes]
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mohit Kumar <mohit.kumar@st.com>
CC: Pratyush Anand <pratyush.anand@st.com>
CC: Jingoo Han <jg1.han@samsung.com>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org>
2014-09-04 14:58:21 -06:00
Thierry Reding
8d38821cbc resources: Add device-managed request/release_resource()
Provide device-managed implementations of the request_resource() and
release_resource() functions.  Upon failure to request a resource, the new
devm_request_resource() function will output an error message for
consistent error reporting.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
2014-09-04 14:41:43 -06:00