Commit graph

27,507 commits

Author SHA1 Message Date
Nicolin Chen
8de2ae2a7f ASoC: fsl: add imx-wm8962 machine driver
This is the initial imx-wm8962 device-tree-only machine driver working with
fsl_ssi driver. More features can be added on top of it later.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-12 16:08:24 +01:00
Fabio Estevam
77845b11a3 ASoC: sgtl5000: Add 'clocks' entry as a required propery
Since commit 9e13f345 (ASoC: sgtl5000: Let the codec acquire its clock) , the
'clocks' entry is mandatory, so update the binding doc.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-12 16:06:42 +01:00
Laurent Pinchart
159f8a0209 gpio-rcar: Add DT support
Add DT bindings for the gpio-rcar driver and read the device
configuration from the DT node at probe time if available.

Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12 21:48:09 +09:00
Heiko Stuebner
a8b447f2bb clocksource: dw_apb_timer_of: add clock-handling
Add the possibility to get the clock-frequency from a timer clock instead
of specifying it as dt property. Additionally also add the possibility
to also define a controlling periphal clock for the timer block.

The clock-frequency property is kept to act as fallback if no clocks
are specified.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Jamie Iles <jamie@jamieiles.com>
2013-06-12 13:47:22 +02:00
Steffen Trumtrar
88b613e623 pwm: add pca9685 driver
Add pwm driver for the NXP pca9685 16 channel pwm-led controller.

The driver is really barebones at this stage. E.g. the OE' pin and
therefore the corresponding registers are not supported.
The driver was tested on a HW where this pin is tied to GND.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
[thierry.reding@gmail.com: style and whitespace cleanups]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-12 13:13:18 +02:00
J Keerthy
8d561b60a9 mfd: DT bindings for the palmas family MFD
Add the various binding files for the palmas family of chips. There is a
top level MFD binding then a seperate binding for regulators IP blocks on chips.

Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Ian Lartey <ian@slimlogic.co.uk>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-12 10:28:41 +01:00
Dinh Nguyen
a92b83af28 ARM: socfpga: dts: Add gate-clock bindings
Add bindings for "socfpga-gate-clk" clocks. These clocks directly feed
the peripherals.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Olof Johansson <olof@lixom.net>
Cc: Pavel Machek <pavel@denx.de>
CC: <linux@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-11 16:35:00 -07:00
Olof Johansson
ea36b02269 Merge branch 'clps711x/soc' into next/soc
From Alexander Shiyan, this is a series of cleanups of clps711x, movig it
closer to multiplatform and cleans up a bunch of old code.

* clps711x/soc:
  ARM: clps711x: Update defconfig
  ARM: clps711x: Add support for SYSCON driver
  ARM: clps711x: edb7211: Control LCD backlight via PWM
  ARM: clps711x: edb7211: Add support for I2C
  ARM: clps711x: Optimize interrupt handling
  ARM: clps711x: Add clocksource framework
  ARM: clps711x: Replace "arch_initcall" in common code with ".init_early"
  ARM: clps711x: Move specific definitions from hardware.h to boards files
  ARM: clps711x: p720t: Define PLD registers as GPIOs
  ARM: clps711x: autcpu12: Move remaining specific definitions to board file
  ARM: clps711x: autcpu12: Special driver for handling memory is removed
  ARM: clps711x: autcpu12: Add support for NOR flash
  ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file
  ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source
  ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency
  ARM: clps711x: Re-add GPIO support
  GPIO: clps711x: Add DT support
  GPIO: clps711x: Rewrite driver for using generic GPIO code
  + Linux 3.10-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-11 15:57:51 -07:00
Alexander Shiyan
a180132f27 GPIO: clps711x: Add DT support
Add DT support to the CLPS711X GPIO driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-11 15:44:57 -07:00
Steven Rostedt (Red Hat)
90e3c03c3a tracing: Add function probe to trigger a ftrace dump of current CPU trace
Add the "cpudump" command to have the current CPU ftrace buffer dumped
to console if a function is hit. This is useful when debugging a
tripple fault, where you have an idea of a function that is called
just before the tripple fault occurs, and can tell ftrace to dump its
content out to the console before it continues.

This differs from the "dump" command as it only dumps the content of
the ring buffer for the currently executing CPU, and does not show
the contents of the other CPUs.

Format is:

  <function>:cpudump

echo 'bad_address:cpudump' > /debug/tracing/set_ftrace_filter

To remove this:

echo '!bad_address:cpudump' > /debug/tracing/set_ftrace_filter

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-11 18:38:48 -04:00
Steven Rostedt (Red Hat)
ad71d889b8 tracing: Add function probe to trigger a ftrace dump to console
Add the "dump" command to have the ftrace buffer dumped to console if
a function is hit. This is useful when debugging a tripple fault,
where you have an idea of a function that is called just before the
tripple fault occurs, and can tell ftrace to dump its content out
to the console before it continues.

Format is:

  <function>:dump

echo 'bad_address:dump' > /debug/tracing/set_ftrace_filter

To remove this:

echo '!bad_address:dump' > /debug/tracing/set_ftrace_filter

Requested-by: Luis Claudio R. Goncalves <lclaudio@uudg.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-06-11 18:38:46 -04:00
Kukjin Kim
0e81a3529e Merge branch 'v3.11-next/driver-pinctrl' into v3.11-next/s3c24xx-driver 2013-06-12 05:24:16 +09:00
Kukjin Kim
20e3753294 Merge branch 'v3.11-next/driver-gpio' into v3.11-next/s3c24xx-driver 2013-06-12 05:24:08 +09:00
Sylwester Nawrocki
9fdb27d48a gpio: samsung: Remove OF support for s3c24xx
There is no users of this code and there is already a pinctrl
driver written for s3c24xx which is going to be used on any
s3c24xx DT platforms. Hence this has been effectively a dead
code in mainline.

This reverts commit 172c6a1365
gpio: samsung: add devicetree init for s3c24xx arches

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-12 05:22:17 +09:00
Alexandre Relange
ab52a9580f iio: ABI doc: update scan_elements sysfs paths
update ABI documentation with current paths related to scan_elements folder

Paths changed long time ago in commit: 26d25ae3f0

Signed-off-by: Alexandre Relange <alexandre@relange.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-11 21:09:37 +01:00
Sachin Kamat
82f73176fd ARM: dts: Update G2D documentation for clock entries
Added clock entry definitions to G2D bindings document.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-12 04:54:53 +09:00
Sachin Kamat
5cd644d837 clk: exynos4: Add additional G2D clocks
Add G2D clocks for Exynos4x12 SoC and sclk_fimg2d required by G2D
IP.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-12 04:54:49 +09:00
Jingoo Han
60e69858a3 ARM: dts: Document DP clock in samsung,exynos5-dp binding
The exynos5-dp node needs a clock specified using the common clock
framework.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-12 04:54:49 +09:00
Lars-Peter Clausen
f83478240e iio:dac: Add support for the AD7303
This patch adds support for the AD7303. The AD7303 is a simple 2 channel 8 bit
DAC with an SPI interface.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-11 20:25:58 +01:00
John W. Linville
3899ba90a4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	drivers/net/wireless/ath/ath9k/debug.c
	net/mac80211/iface.c
2013-06-11 14:48:32 -04:00
Sebastian Hesselbarth
9dbd90f17e irqchip: Add support for Marvell Orion SoCs
This patch adds an irqchip driver for the main interrupt controller found
on Marvell Orion SoCs (Kirkwood, Dove, Orion5x, Discovery Innovation).
Corresponding device tree documentation is also added.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1370536034-23956-2-git-send-email-sebastian.hesselbarth@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-11 16:18:50 +02:00
Eliezer Tamir
0602129286 net: add low latency socket poll
Adds an ndo_ll_poll method and the code that supports it.
This method can be used by low latency applications to busy-poll
Ethernet device queues directly from the socket code.
sysctl_net_ll_poll controls how many microseconds to poll.
Default is zero (disabled).
Individual protocol support will be added by subsequent patches.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-10 21:22:35 -07:00
Dave Airlie
e6dfcc5303 Merge tag 'drm-intel-next-2013-06-01' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Daniel writes:
Another round of drm-intel-next for 3.11. Highlights:
- Haswell IPS support (Paulo Zanoni)
- VECS support on Haswell (Ben Widawsky, Xiang Haihao, ...)
- Haswell watermark fixes (Paulo Zanoni)
- "Make the gun bigger again" multithread fence fix from Chris.
- i915_error_state finnally no longer fails with -ENOMEM! Big thanks to
  Mika for tackling this.
- vlv sideband locking fixes from Jani
- Hangcheck prep work for arb_robustness support (Mika&Chris)
- edp vs cpu port confusion clean-up from Imre
- pile of smaller fixes and cleanups all over.

* tag 'drm-intel-next-2013-06-01' of git://people.freedesktop.org/~danvet/drm-intel: (70 commits)
  drm/i915: add i915_ips_status debugfs entry
  drm/i915: add enable_ips module option
  drm/i915: implement IPS feature
  drm/i915: fix up the edp power well check
  drm/i915: add I915_PARAM_HAS_VEBOX to i915_getparam
  drm/i915: add I915_EXEC_VEBOX to i915_gem_do_execbuffer()
  drm/i915: add VEBOX into debugfs
  drm/i915: Enable vebox interrupts
  drm/i915: vebox interrupt get/put
  drm/i915: consolidate interrupt naming scheme
  drm/i915: Convert irq_refounct to struct
  drm/i915: make PM interrupt writes non-destructive
  drm/i915: Add PM regs to pre/post install
  drm/i915: Create an ivybridge_irq_preinstall
  drm/i915: Create a more generic pm handler for hsw+
  drm/i915: add support for 5/6 data buffer partitioning on Haswell
  drm/i915: properly set HSW WM_LP watermarks
  drm/i915: properly set HSW WM_PIPE registers
  drm/i915: fix pch_nop support
  drm/i915: Vebox ringbuffer init
  ...
2013-06-11 08:38:56 +10:00
Sachin Kamat
135419501a doc: clk: Fix incorrect wording
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-06-10 23:54:14 +02:00
Paul E. McKenney
be77f87c00 Merge branches 'cbnum.2013.06.10a', 'doc.2013.06.10a', 'fixes.2013.06.10a', 'srcu.2013.06.10a' and 'tiny.2013.06.10a' into HEAD
cbnum.2013.06.10a: Apply simplifications stemming from the new callback
	numbering.

doc.2013.06.10a: Documentation updates.

fixes.2013.06.10a: Miscellaneous fixes.

srcu.2013.06.10a: Updates to SRCU.

tiny.2013.06.10a: Eliminate TINY_PREEMPT_RCU.
2013-06-10 13:46:44 -07:00
Paul E. McKenney
7807acdb6b rcu: Remove TINY_PREEMPT_RCU tracing documentation
Because TINY_PREEMPT_RCU is no more, this commit removes its tracing
formats from the documentation.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-06-10 13:45:52 -07:00
Paul E. McKenney
99f88919f8 rcu: Remove srcu_read_lock_raw() and srcu_read_unlock_raw().
These interfaces never did get used, so this commit removes them,
their rcutorture tests, and documentation referencing them.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-06-10 13:45:25 -07:00
Paul E. McKenney
f7bac9b85a kthread: Add kworker kthreads to OS-jitter documentation
The kworker workqueue kthreads can also contribute to OS jitter.
The amount of jitter depends on their use, so this commit adds
documentation on avoiding OS jitter due to workqueue use.

Reported-by: Jonathan Clairembault <jonathan.clairembault@novasparks.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-06-10 13:42:38 -07:00
Paul E. McKenney
ce5f4fc861 nohz_full: Document additional restrictions
This commit calls out the potential for slowing the tick even when there
are multiple runnable processes per CPU,  It also points out that current
mainlined version keeps the tick going on at least one CPU even when all
CPUs are otherwise idle.  Finally, it notes the need for a 1-HZ tick in
order to calculate CPU load, maintain sched average, compute CFS entity
vruntime, compute avenrun, and carry out load balancing.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-06-10 13:42:38 -07:00
Paul E. McKenney
295fde89be nohz_full: Update based on Sedat Dilek review
Make it more clear that there are three options, and give hints as
to which of the three is most likely to be useful in different
situations.

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-06-10 13:42:37 -07:00
Andrzej Pietrasiewicz
b3df2faacb usb: gadget: f_rndis: add configfs support
f_rndis learns about configfs so we can, eventually,
remove in-kernel gadget drivers.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10 17:58:10 +03:00
Andrzej Pietrasiewicz
02832e56f8 usb: gadget: f_subset: add configfs support
f_subset learns about configfs so we can, eventually,
remove in-kernel gadget drivers.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10 17:58:08 +03:00
Andrzej Pietrasiewicz
17b80976f0 usb: gadget: f_eem: add configfs support
f_eem learns about our configfs interface so we
can remove in-kernel gadget drivers in future.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10 17:58:00 +03:00
Andrzej Pietrasiewicz
83408745b2 usb: gadget: f_phonet: add configfs support
f_phonet learns about configfs so we can remove
in-kernel gadget drivers.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-10 17:57:39 +03:00
Sachin Kamat
dc3c83581c ARM: dts: Update MFC documentation for clock entries
Added clock entry definitions to MFC bindings document.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-10 17:22:30 +09:00
Vivek Gautam
0629f1558a ARM: dts: Add device tree bindings for dwc3-exynos
Document device tree binding information as required by the
Samsung' USB 3.0 controller.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-10 17:22:29 +09:00
Michael Hennerich
e764df6796 iio: frequency: adf4350: Add support for dt bindings
Per review feedback from Lars-Peter Clausen <lars@metafoo.de>
Changes since V1:
	Fix return value handling of adf4350_parse_dt()
	Use of_get_gpio
	Avoid abbreviations in devicetree properties
	Fix typo in docs

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-09 19:15:43 +01:00
Greg Kroah-Hartman
38a4671cad Merge 3.10-rc5 into char-misc-next 2013-06-08 22:34:53 -07:00
Jingchang Lu
c9e2e946fb tty: serial: add Freescale lpuart driver support
Add Freescale lpuart driver support. The lpuart device
can be found on Vybrid VF610 and Layerscape LS-1 SoCs.

Signed-off-by: Jingchang Lu <b35083@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-08 22:30:44 -07:00
Greg Kroah-Hartman
141dc40ee3 Merge 3.10-rc5 into usb-next
We need the changes in this branch.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-08 21:27:51 -07:00
Greg Kroah-Hartman
1ba7055af2 Merge 3.10-rc5 into tty-next 2013-06-08 21:23:33 -07:00
Greg Kroah-Hartman
b37668d080 Merge 3.10-rc5 into staging-next 2013-06-08 21:18:09 -07:00
Andrzej Hajda
1bddf1b3ac [media] media: Rename media_entity_remote_source to media_entity_remote_pad
Function media_entity_remote_source actually returns the remote pad to
the given one, regardless if this is the source or the sink pad.
Name media_entity_remote_pad is more adequate for this function.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-08 21:47:11 -03:00
Hans Verkuil
dfd50fc903 [media] DocBook/media/v4l: update version number
The version number was still 3.9: update to 3.10.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-08 20:24:00 -03:00
Linus Torvalds
d7a39e300d Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine fixes from Vinod Koul:
 "Fix from Andy is for dmatest regression reported by Will and Rabin has
  fixed runtime ref counting for st_dma40"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmatest: do not allow to interrupt ongoing tests
  dmaengine: ste_dma40: fix pm runtime ref counting
2013-06-08 10:05:10 -07:00
Rami Rosen
e8b265e8ba doc:networking: Fix default value (icmp_ignore_bogus_error_responses).
This patch fixes icmp_ignore_bogus_error_responses default value to be 1 instead
of FALSE. It is initialized to 1 in icmp_sk_init().

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-07 23:31:54 -07:00
Olof Johansson
e56c60c374 Merge tag 'zynq-clk-for-3.11' of git://git.xilinx.com/linux-xlnx into next/soc
From Michal Simek:
arm: Xilinx Zynq clock changes for v3.11

Change Xilinx Zynq DT clock description which reflects logical abstraction
of Zynq's clock tree.

- Refactor PLL driver
- Use new clock controller driver
- Change timer and uart drivers

* tag 'zynq-clk-for-3.11' of git://git.xilinx.com/linux-xlnx:
  clk: zynq: Remove deprecated clock code
  arm: zynq: Migrate platform to clock controller
  clk: zynq: Add clock controller driver
  clk: zynq: Factor out PLL driver

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-07 18:21:51 -07:00
Daniel Borkmann
d70a3f887a doc: packet: simplify tpacket example code
This patch simplifies the tpacket_v3 example code a bit by getting rid
of unecessary macro wrappers, removing some debugging code so that it is
more to the point, and also adds a header comment. Now this example code
is the very minimum one needs to start from when dealing with tpacket_v3
and ~100 lines smaller than before.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-07 14:39:05 -07:00
Andy Shevchenko
bcc567e311 dmatest: do not allow to interrupt ongoing tests
When user interrupts ongoing transfers the dmatest may end up with console
lockup, oops, or data mismatch. This patch prevents user to abort any ongoing
test.

Documentation is updated accordingly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-06-08 02:13:44 +05:30
Rafael J. Wysocki
7a4b35082c Merge branch 'cpufreq-next' of git://git.linaro.org/people/vireshk/linux into pm-cpufreq
ARM cpufreq updates from Viresh Kumar.
2013-06-07 13:18:59 +02:00