Commit graph

27,507 commits

Author SHA1 Message Date
Paul Cercueil
56ca9db862 iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs
This patch adds support for the AD5592R (spi) and AD5593R (i2c)
ADC/DAC/GPIO devices.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-10 14:29:06 +01:00
Harald Geyer
5ea9274b86 iio: mxs-lradc: Move binding document out of staging as well
commit f836c45922 moved mxs-lradc driver
out of staging. However the binding document was left in the old place.

Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-10 14:26:25 +01:00
Slawomir Stepien
fbbc5e7044 iio: potentiometer: add driver for Maxim Integrated DS1803
The following functions are supported:
 - write, read potentiometer value
 - potentiometer scale

Datasheet: https://datasheets.maximintegrated.com/en/ds/DS1803.pdf

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-10 12:34:09 +01:00
David S. Miller
ae95d71261 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2016-04-09 17:41:41 -04:00
Linus Walleij
6b5029d3ec gpio: document open drain/source behaviour
This has been a totally undocumented feature for years so add some
generic concepts and documentation about open drain/source, include
some facts on how we now support for hardware.

Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-09 20:14:26 +02:00
Linus Torvalds
40bca9dbab Power management and ACPI material for v4.6-rc3
- intel_pstate fixes for two issues exposed by the recent switch
    over from using timers and for one issue introduced during the
    4.4 cycle plus new comments describing data structures used by
    the driver (Rafael Wysocki, Srinivas Pandruvada).
 
  - intel_idle fixes related to CPU offline/online (Richard Cochran).
 
  - intel_idle support (new CPU IDs and state definitions mostly) for
    Skylake-X and Kabylake processors (Len Brown).
 
  - PCC mailbox driver fix for an out-of-bounds memory access that
    may cause the kernel to panic() (Shanker Donthineni).
 
  - New (missing) CPU ID for one apparently overlooked Haswell model
    in the Intel RAPL power capping driver (Srinivas Pandruvada).
 
  - Fix for the PM core's wakeup IRQs framework to make it work after
    wakeup settings reconfiguration from sysfs (Grygorii Strashko).
 
  - Runtime PM documentation update to make it describe what needs
    to be done during device removal more precisely (Krzysztof
    Kozlowski).
 
  - Stale comment removal cleanup in the cpufreq-dt driver (Viresh
    Kumar).
 
  - turbostat utility fixes and support for Broxton, Skylake-X
    and Kabylake processors (Len Brown).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJXCBaNAAoJEILEb/54YlRxDrkP/jdCfB3wOcRGp6LN6GHksC3u
 k2yUQl+XJZhggLda+yUK2ovV5tCJwGmP1N1B/MacRr/5MeicGXBvt6ZrHGqOfTKo
 9xAGKOt2xsoAbHkleB733GIRD9TYZpqCTx9n0dka7kRArQA/uhY+TlXYY2Kn+E0B
 1c4lEN3d9j4G2qW55YxnfRUOhwUc03syokOsS2z9ChEAVPSrn7Zv8V+8rPwxIz5w
 uUWphlnEQgaRwzwxACHwE0bht8sl1cJ1UUSVbzf30mzRlGHiteYyI/vuE2hF9SiV
 DEv9mhSB+4U6WuBHr4Cwu+nf9YTlaY1ZaS3r5EDzJaNJb8tMqPZcGitfn+fTGtUz
 9GlCQZIBcP1vWBDybuuPOzAH++QUFrikozuNfUu1d+WFEypRyadMIvUhtmZPG9mh
 9+Vem+ta32eXos07dx4Dvth+yNvmG5bxPnteDp3GPsnCCDlXutcKaaJaaj+1NzHi
 oqHyEynMhJuN/D2h+oIVIUppKBVO55M+lJMJrX891zICs/98K2LwOtFDuNRWQml0
 3yR7Ieoj5gxVfbT6zNeH5z7CxP/MymNAMjbxfiwqtGHhkNoAv92ymMxnptPiLCHn
 Zyycelsve3sneV+iyk1fAOZFvDXbzTUyigxGP7Kc87iia/Yd2TjLlvwJkMNK6x/K
 2OSkjJFqqrqAqcXNIz3G
 =f4MM
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
 "Fixes for some issues discovered after recent changes and for some
  that have just been found lately regardless of those changes
  (intel_pstate, intel_idle, PM core, mailbox/pcc, turbostat) plus
  support for some new CPU models (intel_idle, Intel RAPL driver,
  turbostat) and documentation updates (intel_pstate, PM core).

  Specifics:

   - intel_pstate fixes for two issues exposed by the recent switch over
     from using timers and for one issue introduced during the 4.4 cycle
     plus new comments describing data structures used by the driver
     (Rafael Wysocki, Srinivas Pandruvada).

   - intel_idle fixes related to CPU offline/online (Richard Cochran).

   - intel_idle support (new CPU IDs and state definitions mostly) for
     Skylake-X and Kabylake processors (Len Brown).

   - PCC mailbox driver fix for an out-of-bounds memory access that may
     cause the kernel to panic() (Shanker Donthineni).

   - New (missing) CPU ID for one apparently overlooked Haswell model in
     the Intel RAPL power capping driver (Srinivas Pandruvada).

   - Fix for the PM core's wakeup IRQs framework to make it work after
     wakeup settings reconfiguration from sysfs (Grygorii Strashko).

   - Runtime PM documentation update to make it describe what needs to
     be done during device removal more precisely (Krzysztof Kozlowski).

   - Stale comment removal cleanup in the cpufreq-dt driver (Viresh
     Kumar).

   - turbostat utility fixes and support for Broxton, Skylake-X and
     Kabylake processors (Len Brown)"

* tag 'pm+acpi-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits)
  PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfs
  tools/power turbostat: work around RC6 counter wrap
  tools/power turbostat: initial KBL support
  tools/power turbostat: initial SKX support
  tools/power turbostat: decode BXT TSC frequency via CPUID
  tools/power turbostat: initial BXT support
  tools/power turbostat: print IRTL MSRs
  tools/power turbostat: SGX state should print only if --debug
  intel_idle: Add KBL support
  intel_idle: Add SKX support
  intel_idle: Clean up all registered devices on exit.
  intel_idle: Propagate hot plug errors.
  intel_idle: Don't overreact to a cpuidle registration failure.
  intel_idle: Setup the timer broadcast only on successful driver load.
  intel_idle: Avoid a double free of the per-CPU data.
  intel_idle: Fix dangling registration on error path.
  intel_idle: Fix deallocation order on the driver exit path.
  intel_idle: Remove redundant initialization calls.
  intel_idle: Fix a helper function's return value.
  intel_idle: remove useless return from void function.
  ...
2016-04-09 11:03:48 -07:00
Vivien Didelot
43c44a9f65 net: dsa: make the STP state function return void
The DSA layer doesn't care about the return code of the port_stp_update
routine, so make it void in the layer and the DSA drivers.

Replace the useless dsa_slave_stp_update function with a
dsa_slave_stp_state function used to reply to the switchdev
SWITCHDEV_ATTR_ID_PORT_STP_STATE attribute.

In the meantime, rename port_stp_update to port_stp_state_set to
explicit the state change.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08 16:50:40 -04:00
Vivien Didelot
f453939c1a net: dsa: document missing functions
Add description for the missing port_vlan_prepare, port_fdb_prepare,
port_fdb_dump functions in the DSA documentation.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08 16:50:02 -04:00
David S. Miller
1089ac6977 For the 4.6 cycle, we have a number of changes:
* Bob's mesh mode rhashtable conversion, this includes
    the rhashtable API change for allocation flags
  * BSSID scan, connect() command reassoc support (Jouni)
  * fast (optimised data only) and support for RSS in mac80211 (myself)
  * various smaller changes
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJXBQ4GAAoJEGt7eEactAAdWiMP/ibaP3I79NDc0s7wCDA+KRkm
 hx0Qx4a0wwm7lDFlnGBjY6yKr+XFDliCvdGX7XGpLSsTioNg7eXPpwx5FQoj6RiV
 8+5RKE9fTguN9ofUzqAwHd9sVOaxvdlXbKfb/N93Gzjpw/meYk58wXdF7Almkroa
 ukgJeMzIlIh+6D96zFEA+Ofzp5chwh+x2Dn0wXutEe9P9fOERA859veAvx65b+Ql
 IRGTqyuY5B/wcbkr4o+DWQwgrdt7Vop9nYVPNWtMHm2JTzfuCSaQ2cD9TnVAK/bg
 /vtqC46KKNLyBRGexAPqdftY9PWcfipgE+n7k+Et4iGSmNm7Z3dEyewgXmqli7XJ
 X8Uiaq+N6Fpe06DVSU7aSRt8NLV64A44jXSfKRI9U2POUqKMn/PMdm8bhPW8qCdM
 ra6myWpQGHWK9e0TQQdShq0NQKGxCZAiSRiiIrbbvXl1CwXxkPCG39wAC3Sh1tEN
 ou4lGraeywGnTjaq+mwLEtHLoug8Y2x+Fz+Ze4Cu2enXxna9lp4lr+rFlc+2+0Er
 o9oPxkTk8krZGIj9M6PNc5W+InMwchaFX3076n67hnFHzFRlOQzkfffbPYlhKJDQ
 f8c9JiNZIoX/fD1TAKsrdO1+EKm/xo7w7pLgbMwQal8Jr88SkITDg0i3oXc56vNQ
 ZK2gUzwvrD/jh0AUyDfN
 =sj7y
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2016-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
For the 4.7 cycle, we have a number of changes:
 * Bob's mesh mode rhashtable conversion, this includes
   the rhashtable API change for allocation flags
 * BSSID scan, connect() command reassoc support (Jouni)
 * fast (optimised data only) and support for RSS in mac80211 (myself)
 * various smaller changes
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08 16:42:31 -04:00
Masanari Iida
e8369d6569 ALSA: Fix a typo in timestamping.txt
This patch fix a spelling typo found in
Documentation/sound/alsa/timestamping.txt

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-08 06:51:31 +02:00
Wolfram Sang
39b132b0fa i2c: mux: demux-pinctrl: Update docs to new sysfs-attributes
Update the docs according to the recent code changes, too.

Fixes: c0c508a418 ("i2c: mux: demux-pinctrl: Clean up sysfs attributes")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-07 21:13:02 +02:00
Kalle Valo
20ac1b325d Merge ath-next from ath.git
ath.git patches for 4.7. Major changes:

ath10k

* implement push-pull tx model using mac80211 software queuing support
* enable scan in AP mode (NL80211_FEATURE_AP_SCAN)

wil6210

* add basic PBSS (Personal Basic Service Set) support
* add initial P2P support
* add oob_mode module parameter
2016-04-07 21:44:37 +03:00
Suravee Suthikulpanit
ca3bf5d47c iommu/amd: Introduces ivrs_acpihid kernel parameter
This patch introduces a new kernel parameter, ivrs_acpihid.
This is used to override existing ACPI-HID IVHD device entry,
or add an entry in case it is missing in the IVHD.

Signed-off-by: Wan Zongshun <Vincent.Wan@amd.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07 13:29:41 +02:00
Raveendra Padasalagi
74813cebd6 Input: bcm_iproc_tsc - use syscon to access shared registers
In Cygnus SOC touch screen controller registers are shared with ADC and
flex timer. Using readl/writel could lead to race condition. So touch
screen driver is enhanced to support register access using syscon framework
API's to take care of mutually exclusive access.

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-06 16:11:56 -07:00
Peter Hutterer
7eb5ca09e4 Input: clarify we want BTN_TOOL_<name> on proximity
This explicitly states behavior we already use for some touchpads and
tablet devices.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-06 10:23:09 -07:00
Kedareswara rao Appana
b72db4005f dmaengine: vdma: Add 64 bit addressing support to the driver
This VDMA  is a soft ip, which can be programmed to support
32 bit addressing or greater than 32 bit addressing.

When the VDMA ip is configured for 32 bit address space
the buffer address is specified by a single register
(0x5C for MM2S and 0xAC for S2MM channel).

When the  VDMA core is configured for an address space greater
than 32 then each buffer address is specified by a combination of
two registers.

The first register specifies the LSB 32 bits of address,
while the next register specifies the MSB 32 bits of address.

For example, 5Ch will specify the LSB 32 bits while 60h will
specify the MSB 32 bits of the first start address.
So we need to program two registers at a time.

This patch adds the 64 bit addressing support to the vdma driver.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-06 08:41:14 -07:00
Dave Airlie
d00b39c175 Merge branch 'drm-next-analogix-dp-v2' of github.com:yakir-Yang/linux into drm-next
This pull request want to land the analogix_dp driver into drm/bridge directory,
which reused the Exynos DP code, and add Rockchip DP support. And those
patches have been:

* 'drm-next-analogix-dp-v2' of github.com:yakir-Yang/linux:
  drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable time
  drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time
  drm: bridge: analogix/dp: add edid modes parse in get_modes method
  drm: bridge: analogix/dp: move hpd detect to connector detect function
  drm: bridge: analogix/dp: try force hpd after plug in lookup failed
  drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288
  drm: bridge: analogix/dp: add some rk3288 special registers setting
  dt-bindings: add document for rockchip variant of analogix_dp
  drm: rockchip: dp: add rockchip platform dp driver
  ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver
  dt-bindings: add document for analogix display port driver
  drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range
  drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count
  drm: bridge: analogix/dp: fix some obvious code style
  drm: bridge: analogix/dp: rename register constants
  drm/exynos: dp: rename implementation specific driver part
  drm: bridge: analogix/dp: split exynos dp driver to bridge directory
2016-04-06 09:57:33 +10:00
Dave Airlie
85bd5ac371 Merge tag 'drm-intel-next-2016-03-30' of git://anongit.freedesktop.org/drm-intel into drm-next
- VBT code refactor for a clean split between parsing&using of firmware
  information (Jani)
- untangle the pll computation code, and splitting up the monster
  i9xx_crtc_compute_clocks (Ander)
- dsi support for bxt (Jani, Shashank Sharma and others)
- color manager (i.e. de-gamma, color conversion matrix & gamma support) from
  Lionel Landwerlin
- Vulkan hsw support in the command parser (Jordan Justen)
- large-scale renaming of intel_engine_cs variables/parameters to avoid the epic
  ring vs. engine confusion introduced in gen8 (Tvrtko Ursulin)
- few atomic patches from Maarten&Matt, big one is two-stage wm programming on ilk-bdw
- refactor driver load and add infrastructure to inject load failures for
  testing, from Imre
- various small things all over

* tag 'drm-intel-next-2016-03-30' of git://anongit.freedesktop.org/drm-intel: (179 commits)
  drm/i915: Update DRIVER_DATE to 20160330
  drm/i915: Call intel_dp_mst_resume() before resuming displays
  drm/i915: Fix races on fbdev
  drm/i915: remove unused dev_priv->render_reclock_avail
  drm/i915: move sdvo mappings to vbt data
  drm/i915: move edp low vswing config to vbt data
  drm/i915: use a substruct in vbt data for edp
  drm/i915: replace for_each_engine()
  drm/i915: introduce for_each_engine_id()
  drm/i915/bxt: Fix DSI HW state readout
  drm/i915: Remove vblank wait from hsw_enable_ips, v2.
  drm/i915: Tidy aliasing_gtt_bind_vma()
  drm/i915: Split PNV version of crtc_compute_clock()
  drm/i915: Split g4x_crtc_compute_clock()
  drm/i915: Split i8xx_crtc_compute_clock()
  drm/i915: Split CHV and VLV specific crtc_compute_clock() hooks
  drm/i915: Merge ironlake_compute_clocks() and ironlake_crtc_compute_clock()
  drm/i915: Move fp divisor calculation into ironlake_compute_dpll()
  drm/i915: Pass crtc_state->dpll directly to ->find_dpll()
  drm/i915: Simplify ironlake_crtc_compute_clock() CPU eDP case
  ...
2016-04-06 09:40:07 +10:00
Ido Schimmel
75f3a1018f switchdev: Use switch ID in suggested udev rule
Since there can be multiple switch ASICs on the same system we should
use the switch ID in order to differentiate between them and set the
switch name (e.g. swX) accordingly.

Also, replace the order of the "Switch ID" and "Port Netdev Naming"
sections following the above change.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05 15:07:54 -04:00
Ivaylo Dimitrov
a221f95ef4 regulator: twl: Provide of_map_mode for twl4030
of_map_mode is needed so to be possible to set initial regulators mode from
the board DTS. Otherwise, for DT boot, regulators are left in their default
state after reset/reboot. Document device specific modes as well.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-05 11:35:33 -07:00
Linus Torvalds
1b5caa3eaa Pin control fixes for the v4.6 series:
- On Super-H PFC (Renesas) controllers: only use dummies on
   legacy systems. This fixes a serious ethernet regression on
   a Renesas board.
 - Pistachio: Fix errors in the pin table.
 - Allwinner SunXi: fix the external interrupts to work.
 - Intel: fix so the high level interrupts start working, and
   fix a spurious interrupt issue.
 - Qualcomm ipq4019: fix the number of GPIOs provided (bump
   to 100), correct register offsets and handle GPIO mode
   properly.
 - Revert the revert on the revert so that Xway has a .to_irq()
   callback again.
 - Minor fixes to errorpaths and debug info.
 - A MAINTAINERS update.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXA6YTAAoJEEEQszewGV1zHWAQAK3xt7WbhVNDENZv+aCvcmYz
 TrZvTifwwYGxkZ/vDJ1PSZ17cN6B+2UtsUR8tN7MLXcbtpiz1RwXkxc+gtpOZkPI
 fQAwQHNrziMsIRWi6LrD3zYsZg13ijsEHItKS8fpaO47Vv3PNuq1w25Ui6hX+qbt
 z535Y2HAeRd/d3PIvodXfGGys9ZolYaPyIAYHTl4rSHXkYGk0UaSIHTm4SBhLxUS
 8GWaXg3Rb9J8h3H3qJirmy41wkP1WnG3JrmK++lS2kfkD4kq2Yg+4OoWyXlwBlD0
 8mmW2ZjJBzQcUta9q3VsDLfO7FzcAWBdc7UFygRzb8JpxCeO400A79d7ahqhbnN0
 ebf461Dz8wSq0W/kEgrQeVPez/ud2pC4n7hqIqyWVhR/bO9h4betOqb6ofNmv6rZ
 fwggySJHVpKBjF/O+CFtqntSMwksgX17ZLweZOww26Vza5J7khc/fEQxRW597C8m
 JtWvs8FtvCZCUNEVc4rdan1iNvSe3DIpgiTw8n+zIB8+b5ruS13XMgjaPmen94eO
 ArzeeDup+mrCRLpjNi2h5YumTC8+ZPuYIF4siGKetpC0s6e7WSS+IUllKfPXE8vt
 xirhPXLYLSE+HxZgw5ZP3vzXLw0cQPU/HEGuPcUQK6vKbGJuXBAIusT9IbnF2pcY
 uf8LL/OYpsUKLGQlHW7q
 =atcX
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Here is a set of pin control fixes for the v4.6 series.

  A bit bigger than what I hoped for, but all fixes are confined to
  drivers, a few of them also targeted to stable.

  Summary:

   - On Super-H PFC (Renesas) controllers: only use dummies on legacy
     systems.  This fixes a serious ethernet regression on a Renesas
     board.
   - Pistachio: Fix errors in the pin table.
   - Allwinner SunXi: fix the external interrupts to work.
   - Intel: fix so the high level interrupts start working, and fix a
     spurious interrupt issue.
   - Qualcomm ipq4019: fix the number of GPIOs provided (bump to 100),
     correct register offsets and handle GPIO mode properly.
   - Revert the revert on the revert so that Xway has a .to_irq()
     callback again.
   - Minor fixes to errorpaths and debug info.
   - A MAINTAINERS update"

* tag 'pinctrl-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  Revert "Revert "pinctrl: lantiq: Implement gpio_chip.to_irq""
  pinctrl: qcom: ipq4019: fix register offsets
  pinctrl: qcom: ipq4019: fix the function enum for gpio mode
  pinctrl: qcom: ipq4019: set ngpios to correct value
  pinctrl: nomadik: fix pull debug print inversion
  MAINTAINERS: pinctrl: samsung: Add two new maintainers
  pinctrl: intel: implement gpio_irq_enable
  pinctrl: intel: make the high level interrupt working
  pinctrl: freescale: imx: fix bogus check of of_iomap() return value
  pinctrl: sunxi: Fix A33 external interrupts not working
  pinctrl: pistachio: fix mfio84-89 function description and pinmux.
  pinctrl: sh-pfc: only use dummy states for non-DT platforms
2016-04-05 07:45:29 -07:00
Jon Hunter
605aa5e48b dt-bindings: Update NVIDIA PMC for Tegra
Add the PMC driver compatible strings for Tegra132 and Tegra210.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-05 15:22:54 +02:00
Sven Eckelmann
5c05803a3e mac80211: document only injected *_RADIOTAP_* flags
Not the internal flags but the radiotap flags are parsed when the monitor
injected frames are prepared for transmission. Thus the documentation
should only document these.

Reported-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Fixes: dfdfc2beb0 ("mac80211: Parse legacy and HT rate in injected frames")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05 10:48:57 +02:00
Lorenzo Bianconi
646e76bb5d mac80211: parse VHT info in injected frames
Add VHT radiotap parsing support to ieee80211_parse_tx_radiotap().
That capability has been tested using a d-link dir-860l rev b1 running
OpenWrt trunk and mt76 driver

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05 10:48:54 +02:00
Yakir Yang
5cff007c58 drm: bridge: analogix/dp: try force hpd after plug in lookup failed
Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.

This is an hardware property, so we need add a devicetree property
"analogix,need-force-hpd" to indicate this sutiation.

Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
2016-04-05 10:13:07 +08:00
Yakir Yang
be91c36247 dt-bindings: add document for rockchip variant of analogix_dp
Rockchip DP driver is a helper driver of analogix_dp coder driver,
so most of the DT property should be descriped in analogix_dp document.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
2016-04-05 10:13:05 +08:00
Yakir Yang
704330615b dt-bindings: add document for analogix display port driver
Analogix dp driver is split from exynos dp driver, so we just
make an copy of exynos_dp.txt, and then simplify exynos_dp.txt

Beside update some exynos dtsi file with the latest change
according to the devicetree binding documents.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
2016-04-05 10:13:03 +08:00
Krzysztof Kozlowski
8fd2910e31 PM / runtime: Document steps for device removal
Put a reminder that during device removal drivers should revert all PM
runtime changes from the probe.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-05 03:46:59 +02:00
Linus Torvalds
c3b1feb024 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
 "This is the first round of MIPS fixes for 4.6:

   - Fix spelling mistakes all over arch/mips
   - Provide __bswapsi2 so XZ kernel compression will build with older GCC
   - ATH79 clock fixes.
   - Fix clock-rated copy-paste erros in ATH79 DTS.
   - Fix gisb-arb compatible string for 7435 BMIPS
   - Enable NAND and UBIFS support in CI20.
   - Fix BUG() assertion caused by inapropriate smp_processor_id() use.
   - Fix exception handling issues for the sake of debuggers
   - Fix the last remaining instance of irq_to_gpio in the db1xxx_ss PCMCIA code
   - Fix MSA unaligned load failures
   - Panic if kernel is configured for a not TLB-supported page size
   - Bail out on unsupported relocs in modules.
   - Partial fix for Qemu breakage after recent IPI rewrite
   - Wire up the preadv2 and pwrite2 syscalls
   - Fix the ar724x clock calculation"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: traps.c: Verify the ISA for microMIPS RDHWR emulation
  MIPS: BMIPS: Fix gisb-arb compatible string for 7435
  MIPS: Bail on unsupported module relocs
  MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: use "ref" for reference clock name
  MIPS: ath79: Fix the ar913x reference clock rate
  MIPS: ath79: Fix the ar724x clock calculation
  dt-bindings: clock: qca,ath79-pll: fix copy-paste typos
  MIPS: traps: Correct the SIGTRAP debug ABI in `do_watch' and `do_trap_or_bp'
  FIRMWARE: Broadcom: Fix grammar of warning messages in bcm47xx_sprom.c.
  MIPS: ci20: Enable NAND and UBIFS support in defconfig.
  MIPS: Fix misspellings in comments.
  MIPS: tlb-r4k: panic if the MMU doesn't support PAGE_SIZE
  MIPS: zboot: Remove copied source files on clean
  MIPS: zboot: Fix the build with XZ compression on older GCC versions
  MIPS: Wire up preadv2 and pwrite2 syscalls.
  MIPS: cpu_name_string: Use raw_smp_processor_id().
  pcmcia: db1xxx_ss: fix last irq_to_gpio user
  MIPS: Fix MSA ld unaligned failure cases
  MIPS: Fix broken malta qemu
2016-04-04 16:53:26 -07:00
Soheil Hassas Yeganeh
fd91e12f59 sock: document timestamping via cmsg in Documentation
Update docs and add code snippet for using cmsg for timestamping.

Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-04 15:50:30 -04:00
Greg Kroah-Hartman
eb7bfed901 First round of IIO new device support, features and cleanups for the 4.7 cycle.
New core support
 * UV light modifier (for intensity)
 * UV light index channel type.
 
 New device support
 * hp206c barometer and altimeter
   - new driver.
 * mcp4131 potentiometer
   - new driver supporting lots of parts from Microchip.
 * mma8452
   - FXLS8471Q support
 - NXP LPC18XX SOC ADC
   - new driver.
 - NXP LPC18XX SOC DAC
   - new driver.
 - rockchip_saradc
   - support rk3399
 * st accel
   - h3lis331dl support
 
 Staging driver removals
 * adis16204
   - obsolete part making it hard to get parts to test the driver in order
     to clean it up.
 * adis16220
   - obsolete part making it hard to get the parts test the driver in order
     to clean it up.
 
 Features
 * core
   - convenience functions to claim / release direct access to the device.
     Makes more consistent handling of this corner easier. Used in ad7192 driver.
 * ak8975
   - power regulator support.
 * at91-sama5d2
   - differential channel support.
 * mma8452
   - runtime pm support
   - drop device specific autosleep and use the runtime pm one instead.
 * ms5611
   - DT bindings
   - oversampling ratio support
 
 Cleanups and minor fixes
 * MAINTAINERS
   - Peter got married - hence name change!
 
 * Documentation
   - Fix a typo in in_proximity_raw description.
   - Add some missing docs for iio_buffer_access_funcs.
 
 * Tools
   - update iio_event_monitor names to match new stuff.
   - make generic_buffer look for triggers ending in -trigger as we let these in
   for a number of drivers a long time back and now it is a fairly common
   option.
 
 Drivers
 * staging wide
   - convert bare unsigned usage to unsigned int to comply with coding style.
 * non staging wide:
   - since boiler plate gpio handling of interrupts has been moved into the
    ACPI core we don't need to include gpio/consumer.h in a load of drivers so
    drop it.
 * ad7606
   - fix an endian casting sparse warning.
 * ak8975
   - fix a possible unitialized warning from gcc.
   - drop and unused field left over from earlier cleanups
   - fix a missing regulator_disable on exit.
 * at91-sama5d2
   - typo and indentation
   - missing IOMEM dependency.
   - cleanup mode register usage by avoidling erasing whole thing when changing
   the sampling frequency.
 * bmc150
   - use the core demux and available_scan_masks to simplify buffer handling
   - optimize the transfers in the trigger handler now we have a magic function
   to emulate bulk reads (under circumstances met here).  This matters with some
   rather dumb i2c adapters in particular.
   - use a single regmap_conf for all bus types as they were all the same.
 * bmg160
   - use the core demux and available_scan_masks to simplify the buffer handling
   - optimize the transfers in the trigger handler now we have a magic funciton
   to emulate bulk rads (under circumstances met here).
   - drop gpio interrupt probing from the driver (ACPI) as now handled by the
   ACPI core.
 * ina2xx-adc
   - update the CALIB register when RShunt changes.
   - fix scale for VShunt - in reality this error canceled out when used.
 * isl29028
   - use regmap to retrieve the struct device instead of carrying a second
   copy of it around.
 * kxcjk-1013
   - use core demux
   - optimize i2c transfers in the trigger handler.
 * mcp4531
   - refactor to use a pointer to access model parameters instead of indexing
     into the array each time.
 * mma8452
   - style fixes
   - avoid swtiching to active whenever the config changes
   - add missin i2c_device_id for mma8451
 * mpu6050
   - fix possible NULL dereference.
   - fix the name / chip_id used when ACPI used (otherwise reports as NULL).
 * ms5611
   - fix a missing regulator_disable that left the regulator on during removal.
 * mxc4005
   - drop gpio interrupt handling for ACPI case from driver as the core now
   handles this case.
 * st-sensors
   - note that there are only ever a maximum of 3 axis on current st-sensors
   so just allocate a fixed sized buffer big enough for that.
 * tpl0102
   - change the i2c_check_functionality condition to bring it inline with other
     IIO users as EOPNOTSUPP.
 * tsl2563
   - replace deprecated flush_scheduled_work
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXAYogAAoJEFSFNJnE9BaIhtsQAK9hsojCFC4EmcE0LdlC7A6r
 h/Any+ehurHSQIZmAZ1mn8QDBedf6Afpj+jl/qt/DADQk3e3u+TO1TbVHHUDB8Na
 ynvt1eibnUPAKxjbetUnPfOTaksp2GN8oScjPqk/3xmP1ip/uP3l2DM+jBOspW2K
 44UDpKE/aeulyCeG8wBHLY0ySuipQ8ZJyebETM3E94UrNdMHiuMyRA+SEbhcG+0T
 GyHYrlmPScFlk3xlhuYk7kS6gJQG0xg6u/qyuaBlQMKY1KXMGknU8sxSmqxRmCNn
 pJ3MeHZY6hFe3PNTgd30z+xbXN4JAifyUBHT2foRF86+f0BJSNIZJo/ynfCPli4z
 Rl+4M9NziYxw4V6osjKtPBquvk8UV6G/1tcgrr5pNFJor4dk6xRg/xCotYsqZuMX
 ypWOMuvkPQq+mqf68uJYlE++/A3xHP7aHdOlsXMgM8605KH1aSecbUP2dhRbHdRs
 u8XTt8Xj6uumQnxUnKjDZGIsDaxyw5JwarjhiNdJaCRgAgFw2qmNiFWYNkBaxxOt
 BheQBceoHLHDk/qTDsi0b5KDLqvArrbY8L6WBR+gW21isFpho5VDMgBSfNfdObGB
 nYaYTBcdx6sXm1SC1bMwVcgMnd3Bs4eWJRw79VFz/pFtTOc5Xpj4uVvnNCzuomqb
 MygKzQb48Gx23saBy4Za
 =SgQo
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of IIO new device support, features and cleanups for the 4.7 cycle.

New core support
* UV light modifier (for intensity)
* UV light index channel type.

New device support
* hp206c barometer and altimeter
  - new driver.
* mcp4131 potentiometer
  - new driver supporting lots of parts from Microchip.
* mma8452
  - FXLS8471Q support
- NXP LPC18XX SOC ADC
  - new driver.
- NXP LPC18XX SOC DAC
  - new driver.
- rockchip_saradc
  - support rk3399
* st accel
  - h3lis331dl support

Staging driver removals
* adis16204
  - obsolete part making it hard to get parts to test the driver in order
    to clean it up.
* adis16220
  - obsolete part making it hard to get the parts test the driver in order
    to clean it up.

Features
* core
  - convenience functions to claim / release direct access to the device.
    Makes more consistent handling of this corner easier. Used in ad7192 driver.
* ak8975
  - power regulator support.
* at91-sama5d2
  - differential channel support.
* mma8452
  - runtime pm support
  - drop device specific autosleep and use the runtime pm one instead.
* ms5611
  - DT bindings
  - oversampling ratio support

Cleanups and minor fixes
* MAINTAINERS
  - Peter got married - hence name change!

* Documentation
  - Fix a typo in in_proximity_raw description.
  - Add some missing docs for iio_buffer_access_funcs.

* Tools
  - update iio_event_monitor names to match new stuff.
  - make generic_buffer look for triggers ending in -trigger as we let these in
  for a number of drivers a long time back and now it is a fairly common
  option.

Drivers
* staging wide
  - convert bare unsigned usage to unsigned int to comply with coding style.
* non staging wide:
  - since boiler plate gpio handling of interrupts has been moved into the
   ACPI core we don't need to include gpio/consumer.h in a load of drivers so
   drop it.
* ad7606
  - fix an endian casting sparse warning.
* ak8975
  - fix a possible unitialized warning from gcc.
  - drop and unused field left over from earlier cleanups
  - fix a missing regulator_disable on exit.
* at91-sama5d2
  - typo and indentation
  - missing IOMEM dependency.
  - cleanup mode register usage by avoidling erasing whole thing when changing
  the sampling frequency.
* bmc150
  - use the core demux and available_scan_masks to simplify buffer handling
  - optimize the transfers in the trigger handler now we have a magic function
  to emulate bulk reads (under circumstances met here).  This matters with some
  rather dumb i2c adapters in particular.
  - use a single regmap_conf for all bus types as they were all the same.
* bmg160
  - use the core demux and available_scan_masks to simplify the buffer handling
  - optimize the transfers in the trigger handler now we have a magic funciton
  to emulate bulk rads (under circumstances met here).
  - drop gpio interrupt probing from the driver (ACPI) as now handled by the
  ACPI core.
* ina2xx-adc
  - update the CALIB register when RShunt changes.
  - fix scale for VShunt - in reality this error canceled out when used.
* isl29028
  - use regmap to retrieve the struct device instead of carrying a second
  copy of it around.
* kxcjk-1013
  - use core demux
  - optimize i2c transfers in the trigger handler.
* mcp4531
  - refactor to use a pointer to access model parameters instead of indexing
    into the array each time.
* mma8452
  - style fixes
  - avoid swtiching to active whenever the config changes
  - add missin i2c_device_id for mma8451
* mpu6050
  - fix possible NULL dereference.
  - fix the name / chip_id used when ACPI used (otherwise reports as NULL).
* ms5611
  - fix a missing regulator_disable that left the regulator on during removal.
* mxc4005
  - drop gpio interrupt handling for ACPI case from driver as the core now
  handles this case.
* st-sensors
  - note that there are only ever a maximum of 3 axis on current st-sensors
  so just allocate a fixed sized buffer big enough for that.
* tpl0102
  - change the i2c_check_functionality condition to bring it inline with other
    IIO users as EOPNOTSUPP.
* tsl2563
  - replace deprecated flush_scheduled_work
2016-04-04 12:31:05 -07:00
Linus Torvalds
4a2d057e4f Merge branch 'PAGE_CACHE_SIZE-removal'
Merge PAGE_CACHE_SIZE removal patches from Kirill Shutemov:
 "PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
  ago with promise that one day it will be possible to implement page
  cache with bigger chunks than PAGE_SIZE.

  This promise never materialized.  And unlikely will.

  Let's stop pretending that pages in page cache are special.  They are
  not.

  The first patch with most changes has been done with coccinelle.  The
  second is manual fixups on top.

  The third patch removes macros definition"

[ I was planning to apply this just before rc2, but then I spaced out,
  so here it is right _after_ rc2 instead.

  As Kirill suggested as a possibility, I could have decided to only
  merge the first two patches, and leave the old interfaces for
  compatibility, but I'd rather get it all done and any out-of-tree
  modules and patches can trivially do the converstion while still also
  working with older kernels, so there is little reason to try to
  maintain the redundant legacy model.    - Linus ]

* PAGE_CACHE_SIZE-removal:
  mm: drop PAGE_CACHE_* and page_cache_{get,release} definition
  mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
  mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
2016-04-04 10:50:24 -07:00
Kirill A. Shutemov
ea1754a084 mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usage
Mostly direct substitution with occasional adjustment or removing
outdated comments.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Purna Chandra Mandal
120e8989eb spi: pic32: Add bindings for PIC32 SPI peripheral
Document the devicetree bindings for the SPI peripheral found
on Microchip PIC32 class devices.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-04 10:04:23 -07:00
Joachim Eastwood
1db7f6201d dt-bindings: phy-lpc18xx-usb-otg: remove unit address from binding
DT bindings should either use a unit address and a reg property
or none of them. Since either of them aren't really useful for
such a simple device like this one remove the unit address.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
2016-04-04 16:13:32 +02:00
Lorenzo Pieralisi
903589ca71 ARM: 8554/1: kernel: pci: remove pci=firmware command line parameter handling
According to kernel documentation, the pci=firmware command line
parameter is only meant to be used on IXP2000 ARM platforms to prevent
the kernel from assigning PCI resources configured by the bootloader.

Since the IXP2000 ARM platforms support has been removed from the
kernel in commit:

commit c65f2abf54 ("ARM: remove ixp23xx and ixp2000 platforms")

its platforms specific kernel parameters should be removed
too from the kernel documentation along with the kernel code
currently handling them in that they have just become obsolete.

This patch removes the pci=firmware command line parameter handling
from ARM code and the related kernel parameters documentation
section.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-04 14:23:04 +01:00
Linus Walleij
1a66ab2ddc Documentation/DT: add blurb for IB2 syscon to Versatile
The ARM Versatile has an optional daughterboard, if this is
mounted, we need to be able to access its system controller.
Put in a documentation blurb for this.

Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-04 10:55:43 +02:00
Linus Walleij
81fc3eb2b3 mtd: augment the "arm,versatile-flash" bindings
The bindings for the "arm,versatile-flash" device was merged in
commit 3ba7222ac9
"arm/versatile: Add device tree support" but was never used
for anything.

Versatile flash chips are actually just standard CFI chips,
but they have one or two bits in a system controller to control
VPP and write protection. Let's use this compatible string in
conjunction with "cfi-flash" to indicate that we have a
normal CFI flash with some extra Versatile-specific protection.

Cc: devicetree@vger.kernel.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-04 10:33:16 +02:00
Linus Torvalds
30cebb6ca1 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
 "This lot contains:

   - Some fixups for the fallout of the topology consolidation which
     unearthed AMD/Intel inconsistencies
   - Documentation for the x86 topology management
   - Support for AMD advanced power management bits
   - Two simple cleanups removing duplicated code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add advanced power management bits
  x86/thread_info: Merge two !__ASSEMBLY__ sections
  x86/cpufreq: Remove duplicated TDP MSR macro definitions
  x86/Documentation: Start documenting x86 topology
  x86/cpu: Get rid of compute_unit_id
  perf/x86/amd: Cleanup Fam10h NB event constraints
  x86/topology: Fix AMD core count
2016-04-03 06:32:28 -05:00
Antony Pavlov
2b885ea66f dt-bindings: clock: qca,ath79-pll: fix copy-paste typos
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12869/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-03 12:32:09 +02:00
Peter Meerwald-Stadler
d409404cf6 iio: Add channel for UV index
UV index indicating strength of sunburn-producing ultraviolet (UV) radiation

Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03 11:14:01 +01:00
Peter Meerwald-Stadler
2c5ff1f9a6 iio: Add modifier for UV light
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03 11:14:00 +01:00
Slawomir Stepien
22d199a539 iio: potentiometer: add driver for Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X
The following functionalities are supported:
 - write, read from volatile memory

Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22060b.pdf

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Reviewed-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03 11:13:42 +01:00
Alexandre TORGUE
0b7a43d376 Documentation: networking: update stmmac
Update stmmac driver documentation according to new GMAC 4.x family.

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-02 20:23:09 -04:00
Alexandre TORGUE
ee2ae1ed46 stmmac: add new DT platform entries for GMAC4
This is to support the snps,dwmac-4.00 and snps,dwmac-4.10a
and related features on the platform driver.
See binding doc for further details.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-02 20:23:09 -04:00
Thor Thayer
abd56b3c84 Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding
Add the device tree bindings needed to support the Altera On-Chip
RAM ECC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: dinguyen@opensource.altera.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@arm.linux.org.uk
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1459450087-24792-5-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2016-04-02 13:49:07 +02:00
Thomas Petazzoni
c0553d04f8 dt-bindings: arm: add DT binding for Marvell AP806 system controller
This commit adds the Device Tree binding documentation for the system
controller found in Marvell AP806 HW block, which is one of the core
HW blocks of the 64-bits Marvell Armada 7K/8K family.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-04-01 18:25:55 -07:00
Linus Torvalds
05cf8077e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Missing device reference in IPSEC input path results in crashes
    during device unregistration.  From Subash Abhinov Kasiviswanathan.

 2) Per-queue ISR register writes not being done properly in macb
    driver, from Cyrille Pitchen.

 3) Stats accounting bugs in bcmgenet, from Patri Gynther.

 4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from
    Quentin Armitage.

 5) SXGBE driver has off-by-one in probe error paths, from Rasmus
    Villemoes.

 6) Fix race in save/swap/delete options in netfilter ipset, from
    Vishwanath Pai.

 7) Ageing time of bridge not set properly when not operating over a
    switchdev device.  Fix from Haishuang Yan.

 8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander
    Duyck.

 9) IPV6 UDP code bumps wrong stats, from Eric Dumazet.

10) FEC driver should only access registers that actually exist on the
    given chipset, fix from Fabio Estevam.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
  net: mvneta: fix changing MTU when using per-cpu processing
  stmmac: fix MDIO settings
  Revert "stmmac: Fix 'eth0: No PHY found' regression"
  stmmac: fix TX normal DESC
  net: mvneta: use cache_line_size() to get cacheline size
  net: mvpp2: use cache_line_size() to get cacheline size
  net: mvpp2: fix maybe-uninitialized warning
  tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter
  net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card
  rtnl: fix msg size calculation in if_nlmsg_size()
  fec: Do not access unexisting register in Coldfire
  net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
  net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES
  net: dsa: mv88e6xxx: Clear the PDOWN bit on setup
  net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write}
  bpf: make padding in bpf_tunnel_key explicit
  ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates
  bnxt_en: Fix ethtool -a reporting.
  bnxt_en: Fix typo in bnxt_hwrm_set_pause_common().
  bnxt_en: Implement proper firmware message padding.
  ...
2016-04-01 20:03:33 -05:00
Neil Armstrong
6cf151fc53 dt-bindings: Add Oxford Semiconductor Reset Controller bindings
Add bindings for the Oxford Semiconductor OXNAS reset controller.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-04-01 16:32:05 +02:00
Srinivas Kandagatla
17dcc37e3e ata: ahci-platform: Add ports-implemented DT bindings.
On some SOCs PORTS_IMPL register value is never programmed by the
firmware and left at zero value. Which means that no sata ports are
available for software. AHCI driver used to cope up with this by
fabricating the port_map if the PORTS_IMPL register is read zero,
but recent patch broke this workaround as zero value was valid for
NVMe disks.

This patch adds ports-implemented DT bindings as workaround for this issue
in a way that DT can can override the PORTS_IMPL register in cases where
the firmware did not program it already.

Fixes: 566d1827df ("libata: disable forced PORTS_IMPL for >= AHCI 1.3")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-01 10:30:30 -04:00