Commit graph

27,507 commits

Author SHA1 Message Date
Gregor Boirie
63d5d525cb iio:magnetometer:ak8975: power regulator support
Add support for an optional regulator which, if found into device-tree,
will power on device at probing time.
The regulator is declared into ak8975 DTS entry as a "vdd-supply" property.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 15:25:58 +00:00
Grégor Boirie
7a948c5e05 iio:pressure:ms5611: complete DT support
Add device-tree ID tables and document bindings.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-05 14:41:00 +00:00
Guenter Roeck
709066acdd hwmon: (adm1275) Add support for ADM1278
ADM1278 is mostly compatible to other chips of the same series.
Besides the usual difference in coefficients, it supports
a temperature sensor, and it can measure both input and output
voltage at the same time.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05 06:36:03 -08:00
Joseph McNally
54ce3a0d80 hwmon: (ntc_thermistor) Add support for ncpXXxh103
This patch adds support for the Murata NCP15XH103 thermistor series.

Signed-off-by: Joseph McNally <jmcna06@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05 06:25:34 -08:00
Masanari Iida
92417dad64 Doc: hwmon: Fix typo "montoring" in hwmon
This patch fix typos found in files within Documentation/hwmon.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05 06:25:34 -08:00
Sanchayan Maity
0b452ccca6 ARM: dts: Change iio_hwmon nodes to use hypen in node names
Change iio_hwmon nodes to use hypen in node names instead of
underscore.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05 06:25:34 -08:00
Mike Looijmans
df92270357 hwmon: Add LTC2990 sensor driver
This adds support for the Linear Technology LTC2990  I2C System Monitor.
The LTC2990 supports a combination of voltage, current and temperature
monitoring. This driver currently only supports reading two currents
by measuring two differential voltages across series resistors, in
addition to the Vcc supply voltage and internal temperature.

This is sufficient to support the Topic Miami SOM which uses this chip
to monitor the currents flowing into the FPGA and the CPU parts.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05 06:25:34 -08:00
Mark Brown
781aab8457 Merge remote-tracking branch 'regmap/topic/mmio' into regmap-next 2016-03-05 21:30:29 +09:00
Heiner Kallweit
02212001c9 [media] media: rc: nuvoton: switch attribute wakeup_data to text
Switch attribute wakeup_data from binary to a text attribute.
This makes it easier to handle in userspace and allows to
use the output of tools like mode2 almost as is to set a
wakeup sequence.
Changing to a text format and values in microseconds also
makes the userspace interface independent of the setting of
SAMPLE_PERIOD in the driver.

In addition document the new sysfs attribute in
Documentation/ABI/testing/sysfs-class-rc-nuvoton.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-05 08:22:03 -03:00
Igal Liberman
ea6370d23c powerpc/fsl: Update fman dt binding with pcs-phy and tbi-phy
The FMan contains internal PHY devices used for SGMII connections
to external PHYs. When these PHYs are in use a reference is needed
for both the external PHY and the internal one. For the external
PHY phy-handle provides the reference. For the internal PHY a new
handle is required.
In dTSEC, the internal PHY is a TBI (Ten Bit Interface) PHY,
the handle used will be tbi-handle.
In mEMAC, the internal PHY is a PCS (Physical Coding Sublayer) PHY,
the handle used will be pcsphy-handle.

Signed-off-by: Igal Liberman <igal.liberman@freescale.com>
Signed-off-by: Scott Wood <oss@buserror.net>
2016-03-05 00:01:14 -06:00
Wang Dongsheng
d64716caf7 Documentation: dt: binding: fsl: add devicetree binding for describing RCPM
RCPM is the Run Control and Power Management module performs all
device-level tasks associated with device run control and power
management.

Add this for freescale powerpc platform and layerscape platform.

Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com>
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
[scottwood: s/pointer/phandle and "disabled" status from example]
Signed-off-by: Scott Wood <oss@buserror.net>
2016-03-04 23:40:43 -06:00
Florian Vaussard
c9146fae4e ASoC: ads117x: Add bindings documentation for TI ADS117x ADC
Currently the binding is only made of the compatible string.

Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05 14:02:13 +09:00
Kuninori Morimoto
f90432fc6e ASoC: rsrc-card: add convert channels support
Renesas sound device has CTU (= Channel Transfer Unit), and
sound card needs its support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05 13:27:27 +09:00
Sugar Zhang
ab8773943a ASoC: rockchip: add bindings for spdif controller
this patch add compatible for rk3366/rk3368/rk3399 spdif,
these three spdifs share the same type.

Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05 12:59:06 +09:00
Greg Kroah-Hartman
3d0712deb0 usb changes for v4.6 merge window
This is almost all under drivers/usb/dwc2/. Many
 changes to the host side implementation of dwc2 have
 been done by Douglas Anderson.
 
 We also have USB 3.1 support added to the Gadget
 Framework and, because of that work, dwc3 got
 support to Synopsys new DWC_usb31 IP core.
 
 Other than these 2 important series, we also have
 the usual collection of non-critical fixes,
 Documentation updates, and minor changes all over
 the place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW2YqWAAoJEIaOsuA1yqREJEgP/11ETLS7iE+HgYMEWbJxo4Ri
 6H7XryMuqyiqNSUrmYlSeax2CQCLac3fXNN7iDGkT2Ot6E3CcnOzdq5/fTSoAEvN
 vgv0nr1MHQaYlYMlsFNZJjZ98h2ZsmtYFuY+RJAKivgjCKoIR6XHeU0ExjAjyWZJ
 5exPyfA8tGnHOJFGdZUe4bBQGCG5TO/cxVkc7xkX6bLnpJibuiRJfToxbwHjY0cK
 mQPba+Tw+3E72mhZw1qw8jwqjLCdgRZXlEvMl0ogaiQydEntDC4bIbY4xDJ8c4L2
 EsACyyx63XYTiaELScxJ2e0Oh0d2yOxLZnUvspsZDlTL0OF/9E2wrVO+1s+FzdQ+
 MmvU9lPcTm+SToIJMWPkmCxpwxtQ2+4HR6IwaU2CIC1YwIjMBzhEvhHV9uZDRx2Q
 7haTEQ5Hny3YvOElEYSAof3WiUCdjMoT4UKCpPFVTZ62mVpOrlcahZoS4UbyOobd
 YGJBx2GwNLpC/Hoa5anasGLeGlR2rtPciHyvYlVm+X9OvQXnHx5d6KqlaBlM+U/6
 vjFtwS7nbbX+ttM7EtdmrC/8i0bFJQqmqg48a7El+E4Os9VJ79+/h9xmoDWoSEWX
 uTUhro+gLs23P6DAd/A08UL/Get0pqM+QdB42Y+ac3CIyl0dviRQ/2JCKgijo52Z
 wK+nnmuJIgzt8ljSzu9G
 =vivP
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.6' of http://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb changes for v4.6 merge window

This is almost all under drivers/usb/dwc2/. Many
changes to the host side implementation of dwc2 have
been done by Douglas Anderson.

We also have USB 3.1 support added to the Gadget
Framework and, because of that work, dwc3 got
support to Synopsys new DWC_usb31 IP core.

Other than these 2 important series, we also have
the usual collection of non-critical fixes,
Documentation updates, and minor changes all over
the place.
2016-03-04 18:43:07 -08:00
Russell King
1b3bf84797 Merge branches 'amba', 'fixes', 'misc' and 'tauros2' into for-next 2016-03-04 23:36:02 +00:00
Joachim Eastwood
782fa5201a doc: dt: add documentation for lpc1850-creg-clk driver
Add DT binding documentation for lpc1850-creg-clk driver.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-04 12:53:20 -08:00
Dmitry Torokhov
52cdce8adb Merge branch 'rotary-encoder' into next
Bring in updates to roraty encoder driver switching it away from legacy
platform data and over to generic device properties and adding support
for encoders using more than 2 GPIOs.
2016-03-04 11:32:40 -08:00
Fu Wei
2fc94b5f22 Documentation: add sbsa-gwdt driver documentation
The sbsa-gwdt.txt documentation in devicetree/bindings/watchdog is for
introducing SBSA(Server Base System Architecture) Generic Watchdog
device node info into FDT.

Also add sbsa-gwdt introduction in watchdog-parameters.txt

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-03-04 20:23:14 +01:00
Antti Seppälä
6c0c0951bb usb: dwc2: Add support for Lantiq ARX and XRX SoCs
Add support for Lantiq ARX and XRX SoC families to the dwc2 driver.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:47 +02:00
Li Jun
dfbae33095 Documentation: usb: chipidea: Update test procedure for HNP polling
Update HNP test procedure as HNP polling is supported.

Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:37 +02:00
Haosdent Huang
88bcf65e66 cgroup: remove stale item in cgroup-v1 document INDEX file.
Signed-off-by: Haosdent Huang <haosdent@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-03-04 08:01:47 -05:00
Radim Krčmář
107d44a2c5 KVM: document KVM_REINJECT_CONTROL ioctl
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-04 09:30:29 +01:00
Leo Yan
1cb17866f0 dt-bindings: mailbox: Document Hi6220 mailbox driver
Document DT binding for Hisilicon Hi6220 mailbox driver.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-03-04 12:32:19 +05:30
Sudeep Holla
c428013783 mailbox: mailbox-test: fix the compatible string
Underscores are usually forbidden in the compatible strings. So lets
remove it before the first users of this is seen.

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-03-04 12:32:18 +05:30
Christian Lamparter
a6d6fc2b67 usbip: move usbip_protocol.txt to Documentation
The usbip_protocol.txt, a document which describes usbip's
inner workings is currently located in the projects source
directory (drivers/usb/usbip/...). This patch moves it to
Documentation/usb.

This discussion was brought up by Guy Harris [0] during the
review of the USBIP dissector I wrote. For anyone interested:
support is available with the latest wireshark master/dev tree.
Simply select a packet from the usbip's tcp-stream you are
intrested on and select the USBIP as the protocol in the
"Decode As" dialog box [1].

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

[0] <https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=12127#c2>
[1] <https://www.wireshark.org/docs/wsug_html_chunked/ChCustProtocolDissectionSection.html#ChAdvDecodeAs>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 19:44:06 -08:00
Simon Horman
f1bbdc3b04 usb: host: xhci-plat: add R-Car Gen2 and Gen3 fallback compatibility strings
Add fallback compatibility strings for R-Car Gen2 and Gen3.

This is in keeping with the fallback scheme being adopted wherever
appropriate for drivers for Renesas SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03 19:44:06 -08:00
Dave Airlie
912b330c20 Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next
Big ticket items are hdmi support for 8996 (aka snapdragon 820), and
adreno 430 support.  Also one more small uapi addition to support
timestamp queries.

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (29 commits)
  drm/msm: rename hdmi symbols
  drm/msm/adreno: remove duplicate adreno_hw_init() call
  drm/msm: add timestamp param
  drm/msm: fix small typo
  drm/msm: grab struct_mutex after allocating submit
  drm/msm: reject submit ioctl if no gpu
  drm/msm/adreno: print details in case of a protect fault interrupt
  drm/msm/adreno: get CP_RPTR from register instead of shadow memory
  drm/msm/adreno: add adreno430 power control
  drm/msm/adreno: support for adreno 430.
  drm/msm: update generated headers
  drm/msm/dsi: fix definition of msm_dsi_pll_28nm_8960_init()
  drm/msm/dsi: Parse DSI lanes via DT
  drm/msm/dsi: Drop VDD regulator for MSM8916
  drm/msm/dsi: Remove incorrect warning on host attach
  drm/msm: Free fb helper resources in msm_unload
  drm/msm/mdp: Detach iommu in mdp4_destroy
  drm/msm: make iommu port names const'ier
  drm/msm/mdp: Use atomic helper to set crtc property
  dt-bindings: msm/hdmi: Add HDMI PHY bindings
  ...
2016-03-04 13:37:39 +10:00
Alexander Stein
299b207dbc Input: ads7846: Add description how to use internal reference (ADS7846)
By simply setting vref-mv to 0 the internal reference will be used.
Document that!

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-03-03 17:28:52 -06:00
Linus Walleij
8fe420da36 ARM: realview: add EB syscon variants to bindings
There are two distinct RealView EB system controller that we need
to detect and handle because their register layout differ
slightly.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-03-03 17:28:52 -06:00
Geert Uytterhoeven
46f1296fb7 devicetree: bindings: ARM: Use "uV" for micro-volt
The binding documentation uses both "uVolt" and "uV" for micro-volt.
Improve consistency by settling on "uV".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-03-03 17:27:12 -06:00
Fabio Estevam
29626043c4 serial: fsl-imx-uart: Fix typo in fsl,dte-mode description
We should say "The uart works in DCE mode".

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-03-03 17:27:10 -06:00
Christopher S. Hall
719f1aa4a6 ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping
Currently, network /system cross-timestamping is performed in the
PTP_SYS_OFFSET ioctl. The PTP clock driver reads gettimeofday() and
the gettime64() callback provided by the driver. The cross-timestamp
is best effort where the latency between the capture of system time
(getnstimeofday()) and the device time (driver callback) may be
significant.

The getcrosststamp() callback and corresponding PTP_SYS_OFFSET_PRECISE
ioctl allows the driver to perform this device/system correlation when
for example cross timestamp hardware is available. Modern Intel
systems can do this for onboard Ethernet controllers using the ART
counter. There is virtually zero latency between captures of the ART
and network device clock.

The capabilities ioctl (PTP_CLOCK_GETCAPS), is augmented allowing
applications to query whether or not drivers implement the
getcrosststamp callback, providing more precise cross timestamping.

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: kevin.b.stanton@intel.com
Cc: kevin.j.clarke@intel.com
Cc: hpa@zytor.com
Cc: jeffrey.t.kirsher@intel.com
Cc: netdev@vger.kernel.org
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
[jstultz: Commit subject tweaks]
Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-03-03 14:23:43 -08:00
Shubhrajyoti Datta
36ecbcab84 i2c: xiic: Implement power management
Enable power management. This patch enables the clocks before transfer
and disables after the transfer. It also adds the clock description.

Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-03-03 22:25:17 +01:00
Javier Martinez Canillas
31e717dba1 [media] Revert "[media] tvp5150: document input connectors DT bindings"
This reverts commit 82c2ffeb21 ("[media] tvp5150: document input
connectors DT bindings") since the DT binding is too device driver
specific and should instead be more generic and use the bindings
in Documentation/devicetree/bindings/display/connector/ and linked
to the tvp5150 using the OF graph port and endpoints.

There are still ongoing discussions about how the input connectors
will be supported by the Media Controller framework so until that
is settled, it is better to revert the connectors portion of the
bindings to avoid known to be broken bindings docs to hit mainline.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03 13:58:28 -03:00
Archit Taneja
26f7d1f4d9 drm/msm/dsi: Parse DSI lanes via DT
The DSI driver is currently unaware of how the DSI physical data lanes
are mapped to the logical lanes provided by the DSI controller.

Create a DT binding "qcom,data-lane-map" that provides this information
on a given platform.

The MSM DSI controller is restricted in terms of what all mappings
it can support. The lane polarity is fixed for all the lanes, the clock
lanes are fixed, and the data lanes can be swapped among each other only
for a few combinations. Apply these restrictions when we parse the DT
data.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
2016-03-03 11:55:20 -05:00
Xiao Guangrong
92f94f1e9e KVM: MMU: rename has_wrprotected_page to mmu_gfn_lpage_is_disallowed
kvm_lpage_info->write_count is used to detect if the large page mapping
for the gfn on the specified level is allowed, rename it to disallow_lpage
to reflect its purpose, also we rename has_wrprotected_page() to
mmu_gfn_lpage_is_disallowed() to make the code more clearer

Later we will extend this mechanism for page tracking: if the gfn is
tracked then large mapping for that gfn on any level is not allowed.
The new name is more straightforward

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-03 14:36:19 +01:00
Paolo Bonzini
61ec84f145 Merge branch 'kvm-ppc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
The highlights are:

* Enable VFIO device on PowerPC, from David Gibson
* Optimizations to speed up IPIs between vcpus in HV KVM,
  from Suresh Warrier (who is also Suresh E. Warrier)
* In-kernel handling of IOMMU hypercalls, and support for dynamic DMA
  windows (DDW), from Alexey Kardashevskiy.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-03 14:36:07 +01:00
Greg Hackmann
65d687a7b7 power: goldfish_battery: add devicetree bindings
Add device tree bindings to the Goldfish virtual platform battery drivers.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-03-03 13:53:52 +01:00
GEORGE
9c91738d49 [media] saa7134: Add support for Snazio TvPVR PRO
This board has PCI ID: 1779:13cf

[mchehab@osg.samsung.com: Make scripts/checkpatch.pl happy]
Signed-off-by: Pojar George <geoubuntu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03 09:03:48 -03:00
Magnus Damm
d4e42e72e7 iommu/ipmmu-vmsa: Add r8a7795 DT binding
Update the IPMMU DT binding documentation to include the r8a7795 compat
string as well as the "renesas,ipmmu-main" property that on r8a7795 will
be used to describe the topology and the relationship between the various
cache IPMMU instances and the main IPMMU.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-03-03 10:59:17 +01:00
Guennadi Liakhovetski
0bec78a4b2 [media] V4L: add Y12I, Y8I and Z16 pixel format documentation
Add documentation for 3 formats, used by RealSense cameras like R200.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-03-03 06:29:42 -03:00
Uwe Kleine-König
7dde4e7474 Input: rotary-encoder - support more than 2 gpios as input
This changes how the used gpios are stored (i.e. a struct gpio_descs
instead of two struct gpio_desc) and as with >2 gpios the states are
numbered differently the function rotary_encoder_get_state returns
unencoded numbers instead of grey encoded numbers before. The latter has
some implications on how the returned value is used and so the change is
bigger than one might expect at first.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02 15:48:05 -08:00
Stephen Boyd
06a9852747 Merge tag 'sunxi-clocks-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next
Pull Allwinner clk updates from Maxime Ripard:

Allwinner clocks additions for 4.6

A bunch of things, mostly:
  - Finally switched everything over to OF_CLK_DECLARE, which should remove
    orphans clocks entirely
  - Reworked the clk-factors to be able to add new parameters
  - Improved the error reporting
  - A bunch of new clocks for new SoCs.

* tag 'sunxi-clocks-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (25 commits)
  clk: sunxi: Add apb0 gates for H3
  clk: sunxi: Improve divs_clk error handling and reporting
  clk: sunxi: improve divider_clk error handling and reporting
  clk: sunxi: improve mux_clk error handling and reporting
  clk: sunxi: Fix sun8i-a23-apb0-clk divider flags
  clk: sunxi: Remove clk_register_clkdev calls
  clk: sunxi: Remove old probe and protection code
  clk: sunxi: convert current clocks registration to CLK_OF_DECLARE
  clk: sunxi: Make clocks setup functions take const pointer
  clk: sunxi: Make clocks setup functions return their clock
  clk: sunxi: improve error reporting for the mux clock
  clk: sunxi: don't mark sun6i_ar100_data __initconst
  clk: sunxi: add bus gates for A83T
  clk: sunxi: Add apb0 gates for A83T
  clk: sunxi: rewrite sun8i-a23-mbus-clk using the simpler composite clk
  clk: sunxi: rewrite sun6i-ar100 using factors clk
  clk: sunxi: rewrite sun6i-a31-ahb1-clk using factors clk with custom recalc
  clk: sunxi: factors: Drop round_rate from clk ops
  clk: sunxi: factors: Support custom formulas
  clk: sunxi: factors: Consolidate get_factors parameters into a struct
  ...
2016-03-02 14:31:42 -08:00
Archit Taneja
f31d12af95 dt-bindings: msm/hdmi: Add HDMI PHY bindings
Add HDMI PHY bindings. Update the example to use HDMI PHY.

Added a missing power-domains property in the HDMI core bindings. Also,
simplified HDMI TX's DT node name in the example.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
2016-03-02 16:19:27 -05:00
Arnd Bergmann
aae31813d3 The i.MX device tree updates for 4.6:
- New i.MX6 board support: NXP/Freescale imx6qp boards, Advantech/GE,
   Uniwest evi, Engicam IMX6 Q7, Toradex Apalis SoM and Ixora carrier
   boards
 - Relicense vf610 dts files under GPLv2/X11
 - A patch series from Stefan updating Vybrid Colibri board support with
   PMU, regulators and other devices enabled
 - Correct PWM pinmux for Ventana boards and add more pinmux for GW54xx
 - Clean up imx6q-tbs2910 dts file and add SATA PHY configuration
 - A series from Russell cleaning up hummingboard dts files
 - A series from Lothar updating Ka-Ro i.MX28, i.MX53 and i.MX6 boards
   to use better audio codec frequency and display configurations
 - Clean up whitespaces in i.MX6UL pinctrl header and add more devices
   support for the SoC
 - Other random dts updates to enable various devices
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJW1aZfAAoJEFBXWFqHsHzOWvwH/1ieekZ5VYnGyO4CT39DaNxU
 LMkywkPtp8oUfdVHOfGEMj43knYHsaVFakGS2w8iMNzg+YonWXG/mkR3HUJmoS1L
 HzFEnapLzACSSCbn8yZzWzzNvAlg2arqFErQUlhXe9/CNz64uZSigsO3Ib/JNOlX
 GWDRa8szryEkEyk2cJo/wyWWSkLGGRai4uNBR6BmUq/MltVjVHOvTV5NeyKpinHZ
 mQQFGEbvVk1hJ0sfceX/rmdxgvV0H3Axq8C0JyzbevUTcvS45A85tEXHkrHbYb/f
 mJCNXxmmt+NrH8x79YxnuhKTRQ8lNn8fBu9wOtMaBJjRNB3ie3HBh2QabXBs/MA=
 =FKmy
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt2

Merge "i.MX device tree updates for 4.6" from Shawn Guo:

- New i.MX6 board support: NXP/Freescale imx6qp boards, Advantech/GE,
  Uniwest evi, Engicam IMX6 Q7, Toradex Apalis SoM and Ixora carrier
  boards
- Relicense vf610 dts files under GPLv2/X11
- A patch series from Stefan updating Vybrid Colibri board support with
  PMU, regulators and other devices enabled
- Correct PWM pinmux for Ventana boards and add more pinmux for GW54xx
- Clean up imx6q-tbs2910 dts file and add SATA PHY configuration
- A series from Russell cleaning up hummingboard dts files
- A series from Lothar updating Ka-Ro i.MX28, i.MX53 and i.MX6 boards
  to use better audio codec frequency and display configurations
- Clean up whitespaces in i.MX6UL pinctrl header and add more devices
  support for the SoC
- Other random dts updates to enable various devices

* tag 'imx-dt-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (75 commits)
  ARM: dts: imx53-qsb: Fix gpio button polarity
  ARM: dts: vfxxx: Add DAC node for Vybrid SoC
  ARM: dts: imx6q: add missing links between ipu2 and mipi dsi
  ARM: dts: imx: Add support for Advantech/GE B850v3
  ARM: dts: imx: Add support for Advantech/GE B650v3
  ARM: dts: imx: Add support for Advantech/GE B450v3
  ARM: dts: imx: Add support for Advantech/GE Bx50v3
  ARM: dts: imx: Add Advantech BA-16 Qseven module
  of: Add vendor prefix for General Electric Company
  of: Add vendor prefix for Advantech Corporation
  ARM: dts: imx35.dtsi: change the clock information for usb
  ARM: dts: imx25.dtsi: change the clock information for usb
  ARM: dts: imx6ul: add kpp support
  ARM: dts: imx6ul: add gpmi support
  ARM: dts: imx6ul: add lcdif support
  ARM: dts: imx6ul: add sai support
  ARM: dts: imx6ul: add flexcan support
  ARM: dts: imx6ul: add sdma support
  ARM: dts: imx6ul: add pwm[1-4] nodes
  ARM: dts: imx6ul: disable PWMs by default
  ...
2016-03-02 21:24:07 +01:00
Giuseppe Cavallaro
afea03656a stmmac: rework DMA bus setting and introduce new platform AXI structure
This patch restructures the DMA bus settings and this is done
by introducing a new platform structure used for programming
the AXI Bus Mode Register inside the DMA module.
This structure can be populated from device-tree as documented in the
binding txt file.

After initializing the DMA, the AXI register can be optionally tuned
for platform drivers based.
This patch also reworks some parameters to make coherent the DMA
configuration now that AXI register is introduced.
For example, the burst_len is managed by using the mentioned axi
support above; so the snps,burst-len parameter has been removed.
It makes sense to provide the AAL parameter from DT to Address-Aligned
Beats inside the Register0 and review the PBL settings when initialize
the engine.

For PCI glue, rebuilding the story of this setting, it
was added to align a configuration so not for fixing some
known problem. No issue raised after this patch.
It is safe to use the default burst length instead of
tuning it to the maximum value

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02 14:21:30 -05:00
santosh.shilimkar@oracle.com
dcdede0406 RDS: Drop stale iWARP RDMA transport
RDS iWarp support code has become stale and non testable. As
indicated earlier, am dropping the support for it.

If new iWarp user(s) shows up in future, we can adapat the RDS IB
transprt for the special RDMA READ sink case. iWarp needs an MR
for the RDMA READ sink.

Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02 14:13:17 -05:00
Arnd Bergmann
953a400ac2 Qualcomm ARM Based Device Tree Updates for v4.6
* Add documentation for Kryo
 * Add RPMCC node for APQ8064
 * Updates for MSM8974
 * Add board clocks
 * Add support for Nexus7 device
 * Fixup pmic reg properties
 * Various updates/cleanups for APQ8064 based boards
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW0K5bAAoJEFKiBbHx2RXVj9wP/107kSXTR29qp4/NuKdnoyim
 UEOx54h1hqDEV9u+1BzRYL9TeCjzefnIkltc432ol1YJ/3DfyzsSA/eKDcPuYmh3
 6NYEMfqHxsjsx6hROm4+DCWssKlnRiw15F3zNtVUlqSQZHY+Aa/vFjd18nxI+egt
 wmLHCdQmC+1MwCPZ1FF78PvWOtTlRbg6m/4/4/UwUXLQhPydyIk6U4lAQQfF638P
 fLjrldOWxzGQ+9LHX7ZA7jDrAoJcFhZtcl5gHa4LcNf/yCP49OLm6HyzmEEUffyQ
 kN5aNCJhoSVtm+ig2OeBHzISiTFVVe04xDgHR7Qi4wT5Ms2/GyNx/2Xl181OmqVK
 lHCorD650VaKp4Zta/FD0c10PuklHP4SyJnz0RBjg/67Z8bCds8UmCxzC/q2K8FJ
 8r14oeq9HWcVE3ujwGUGETXOCWEjwMNzzSa/SFso3WmqUbFD+X0/VqNSR+6vvPMz
 w7k2sKSkSCnQFXHXO7s8QOkP2+lePZ+LqGuWTvOa1Jh7LBAFDoTgFUtZCERc2gm8
 3cnDpepXkjQFNKCahoc2y//j6OzhOW/vkHEDPJJNR2GELv+LgRSw7MT2x4FpSsfT
 6Ejkq87vJqesV/GPwQu8YITEckiRfCs16geL6wTrJhTziMRlk35t5hdIjTx/seKU
 IPe4oV4zRH+4jcS3b0mw
 =TpOo
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dt-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Merge "Qualcomm ARM Based Device Tree Updates for v4.6" from Andy Gross:

* Add documentation for Kryo
* Add RPMCC node for APQ8064
* Updates for MSM8974
* Add board clocks
* Add support for Nexus7 device
* Fixup pmic reg properties
* Various updates/cleanups for APQ8064 based boards

* tag 'qcom-dt-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (23 commits)
  ARM: dts: ifc6410: add correct aliases to the i2c and spi bus
  ARM: dts: apq8064: add i2c6 device node.
  ARM: dts: ifc6410: enable cam i2c device
  ARM: dts: apq8064: add gsbi4 with i2c node.
  ARM: dts: apq8064: add missing i2c2 pinctrl info
  ARM: dts: ifc6410: enable spi device on expansion
  ARM: dts: apq8064: add spi5 device node.
  ARM: dts: apq8064: add i2c sleep pinctrl states.
  ARM: dts: apq8064: add pci support in CM QS600
  ARM: dts: apq8064: move pinctrls to dedicated dtsi
  ARM: dts: qcom: fix i2c lables to be inline with others
  dts: msm8974: Add dma channels for blsp2_i2c1 node
  dts: msm8974: Add blsp2_bam dma node
  ARM: dts: qcom: Remove size elements from pmic reg properties
  devicetree: bindings: Document qcom board compatible format
  devicetree: Add DTS file to support the Nexus7 2013 (flo) device.
  devicetree: qcom-apq8064.dtsi: Add i2c3 address-cells and size-cells values
  arm: dts: qcom: Add more board clocks
  ARM: dts: qcom: msm8974: Add WCNSS SMP2P node
  ARM: dts: qcom: msm8974: Add smsm node
  ...
2016-03-02 20:11:21 +01:00
Greg Hackmann
8c5dc5a1ad Input: goldfish_events - add devicetree bindings
Add device tree bindings to the Goldfish virtual platform event driver.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-02 09:38:54 -08:00