Commit graph

27,507 commits

Author SHA1 Message Date
David S. Miller
f61e2eebc7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-12-03

This series contains updates to ixgbe, i40e/i40evf, MAINTAINERS and e100.txt

Alex provides a fix for ixgbe where enabling SR-IOV and then bringing the
interface up was resulting in the PF MAC addresses getting into a bad state.
The workaround for this issue is to bring up the interface first and then
enable SR-IOV as this will trigger the reset in the existing code.

I clean up legacy license stuff in the e100.txt documentation and then
update the maintainers/reviewers list for our drivers.

Jesse fixes an issue with the i40e/i40evf drivers, where if the driver were
to happen to have a mutex held while the i40e_init_adminq() call was called,
the init_adminq might inadvertently call mutex_init on a lock that was held
which is a violation of the calling semantices.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-05 17:39:31 -05:00
Chris Metcalf
f84cfbb0ff Documentation/memory-barriers.txt: Fix ACCESS_ONCE thinko
In commit 2ecf810121 ("Documentation/memory-barriers.txt: Add
needed ACCESS_ONCE() calls to memory-barriers.txt") the statement
"Q = P" was converted to "ACCESS_ONCE(Q) = P".  This should have
been "Q = ACCESS_ONCE(P)".  It later became "WRITE_ONCE(Q, P)".
This doesn't match the following text, which is "Q = LOAD P".
Change the statement to be "Q = READ_ONCE(P)".

Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-05 12:34:54 -08:00
Paul E. McKenney
c64c4b0f9a documentation: Update RCU requirements based on expedited changes
Because RCU-sched expedited grace periods now use IPIs and interact
with rcu_read_unlock(), it is no longer sufficient to disable preemption
across RCU read-side critical sections that acquire and hold scheduler
locks.  It is now necessary to instead disable interrupts.  This commit
documents this change.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-05 12:34:32 -08:00
Paul E. McKenney
4b689330b1 documentation: Clarify RCU memory barriers and requirements
The RCU requirements do not make it absolutely clear that the
memory-barrier requirements are not intended to replace the fundamental
requirement that all pre-existing RCU readers complete before a grace
period completes.  This commit therefore pulls the memory-barrier
requirements into a separate section and explicitly calls out the
relationship between the memory-barrier requirements and the fundamental
requirement.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-05 12:33:37 -08:00
Paul E. McKenney
a4b575627e documentation: Expand on scheduler/RCU deadlock requirements
This commit adds a second option for avoiding scheduler/RCU deadlocks,
namely that preemption be disabled across the entire RCU read-side
critical section in question.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-05 12:33:26 -08:00
Paul E. McKenney
0825458b1d documentation: Composability analogies
This commit expands on RCU's composability by comparing it to that of
transactional memory and of locking.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-05 12:33:11 -08:00
Paul E. McKenney
01d3ad3834 documentation: Cover requirements controlling stall warnings
This commit adds verbiage on boot and sysfs parameters that can be
used to control RCU CPU stall warnings, both to change the timeout
and to suppress these warnings entirely.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-05 12:32:19 -08:00
Paul E. McKenney
701e80312f Documentation: Record bottom-bit-zero guarantee for ->next
This commit records RCU's guarantee that the bottom bit of the rcu_head
structure's ->next field will remain zero for callbacks posted via
call_rcu(), but not necessarily for <tt>kfree_rcu()</tt> or some
possible future call_rcu_lazy() variant that might one day be created
for energy-efficiency purposese.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Updates URLs as suggested by Josh Triplett. ]
2015-12-05 12:31:47 -08:00
Paul E. McKenney
649e4368ff documentation: Record RCU requirements
This commit adds RCU requirements as published in a 2015 LWN series.
Bringing these requirements in-tree allows them to be updated as changes
are discovered.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Updates to charset and URLs as suggested by Josh Triplett. ]
2015-12-05 12:19:07 -08:00
Sander Vermin
bcf5b3deb0 Input: pixcir_i2c - add support for wake and enable gpios
On some devices the wake and enable pins of the pixcir touchscreen
controller are connected to gpios and these must be controlled by the
driver for the device to operate properly.

Signed-off-by: Sander Vermin <sander@vermin.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-04 17:12:07 -08:00
Bjørn Mork
40dd0d9486 net: qmi_wwan: document the qmi/raw_ip sysfs file
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-04 16:56:23 -05:00
Jiri Kosina
fc284d6318 Merge branch 'from-rusty/modules-next' into for-4.5/core
As agreed with Rusty, we're taking a current module-next pile through
livepatching.git, as it contains solely patches that are pre-requisity
for module page protection cleanups in livepatching. Rusty will be
restarting module-next from scratch.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-04 22:48:30 +01:00
Paul E. McKenney
3e42ec1aa7 rcu: Allow expedited grace periods to be disabled at init
Expedited grace periods can speed up boot, but are undesirable in
aggressive real-time systems.  This commit therefore introduces a
kernel parameter rcupdate.rcu_normal_after_boot that disables
expedited grace periods just before init is spawned.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-04 12:26:54 -08:00
Paul E. McKenney
5a9be7c628 rcu: Add rcu_normal kernel parameter to suppress expediting
Although expedited grace periods can be quite useful, and although their
OS jitter has been greatly reduced, they can still pose problems for
extreme real-time workloads.  This commit therefore adds a rcu_normal
kernel boot parameter (which can also be manipulated via sysfs)
to suppress expedited grace periods, that is, to treat requests for
expedited grace periods as if they were requests for normal grace periods.
If both rcu_expedited and rcu_normal are specified, rcu_normal wins.
This means that if you are relying on expedited grace periods to speed up
boot, you will want to specify rcu_expedited on the kernel command line,
and then specify rcu_normal via sysfs once boot completes.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-04 12:26:53 -08:00
Masanari Iida
4bb9998d38 Doc: f2fs: Fix typos in Documentation/filesystems/f2fs.txt
This patch fix some typos in Documentation/filesystems/f2fs.txt

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-12-04 11:52:33 -08:00
Oliver Neukum
40d581489a Documentation: nousb is a module parameter
The documentation wrongly implied that it is a core parameter.
That is not true. If usbcore is compiled as a module, a module
parameter needs a prefix.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-04 08:29:54 -08:00
Mauro Carvalho Chehab
991ce92f8d [media] use https://linuxtv.org for LinuxTV URLs
While https was always supported on linuxtv.org, only in
Dec 3 2015 the website is using valid certificates.

As we're planning to drop pure http support on some
future, change all references at the media subsystem
to point to the https URL instead.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-04 10:38:59 -02:00
Davidlohr Bueso
2d142e599b locking/barriers, arch: Remove ambiguous statement in the smp_store_mb() documentation
It serves no purpose but to confuse readers, and is most
likely a left over from constant memory-barriers.txt
updates. I.e.:

  http://lists.openwall.net/linux-kernel/2006/07/15/27

Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1445975631-17047-5-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-04 11:39:51 +01:00
Richard Fitzgerald
9a65a6d3cb mfd: arizona: Update DT bindings to add CS47L24 and WM1831
This updates the Arizona MFD device tree bindings to add the
Cirrus Logic CS47L24 and WM1831 codecs. Note that unlike all the
other codecs the DCVDD-supply and MICVDD-supply are mandatory.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-12-04 08:46:34 +00:00
David S. Miller
f188b951f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/renesas/ravb_main.c
	kernel/bpf/syscall.c
	net/ipv4/ipmr.c

All three conflicts were cases of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 21:09:12 -05:00
Linus Torvalds
071f5d105a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "A lot of Thanksgiving turkey leftovers accumulated, here goes:

   1) Fix bluetooth l2cap_chan object leak, from Johan Hedberg.

   2) IDs for some new iwlwifi chips, from Oren Givon.

   3) Fix rtlwifi lockups on boot, from Larry Finger.

   4) Fix memory leak in fm10k, from Stephen Hemminger.

   5) We have a route leak in the ipv6 tunnel infrastructure, fix from
      Paolo Abeni.

   6) Fix buffer pointer handling in arm64 bpf JIT,f rom Zi Shen Lim.

   7) Wrong lockdep annotations in tcp md5 support, fix from Eric
      Dumazet.

   8) Work around some middle boxes which prevent proper handling of TCP
      Fast Open, from Yuchung Cheng.

   9) TCP repair can do huge kmalloc() requests, build paged SKBs
      instead.  From Eric Dumazet.

  10) Fix msg_controllen overflow in scm_detach_fds, from Daniel
      Borkmann.

  11) Fix device leaks on ipmr table destruction in ipv4 and ipv6, from
      Nikolay Aleksandrov.

  12) Fix use after free in epoll with AF_UNIX sockets, from Rainer
      Weikusat.

  13) Fix double free in VRF code, from Nikolay Aleksandrov.

  14) Fix skb leaks on socket receive queue in tipc, from Ying Xue.

  15) Fix ifup/ifdown crach in xgene driver, from Iyappan Subramanian.

  16) Fix clearing of persistent array maps in bpf, from Daniel
      Borkmann.

  17) In TCP, for the cross-SYN case, we don't initialize tp->copied_seq
      early enough.  From Eric Dumazet.

  18) Fix out of bounds accesses in bpf array implementation when
      updating elements, from Daniel Borkmann.

  19) Fill gaps in RCU protection of np->opt in ipv6 stack, from Eric
      Dumazet.

  20) When dumping proxy neigh entries, we have to accomodate NULL
      device pointers properly, from Konstantin Khlebnikov.

  21) SCTP doesn't release all ipv6 socket resources properly, fix from
      Eric Dumazet.

  22) Prevent underflows of sch->q.qlen for multiqueue packet
      schedulers, also from Eric Dumazet.

  23) Fix MAC and unicast list handling in bnxt_en driver, from Jeffrey
      Huang and Michael Chan.

  24) Don't actively scan radar channels, from Antonio Quartulli"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (110 commits)
  net: phy: reset only targeted phy
  bnxt_en: Setup uc_list mac filters after resetting the chip.
  bnxt_en: enforce proper storing of MAC address
  bnxt_en: Fixed incorrect implementation of ndo_set_mac_address
  net: lpc_eth: remove irq > NR_IRQS check from probe()
  net_sched: fix qdisc_tree_decrease_qlen() races
  openvswitch: fix hangup on vxlan/gre/geneve device deletion
  ipv4: igmp: Allow removing groups from a removed interface
  ipv6: sctp: implement sctp_v6_destroy_sock()
  arm64: bpf: add 'store immediate' instruction
  ipv6: kill sk_dst_lock
  ipv6: sctp: add rcu protection around np->opt
  net/neighbour: fix crash at dumping device-agnostic proxy entries
  sctp: use GFP_USER for user-controlled kmalloc
  sctp: convert sack_needed and sack_generation to bits
  ipv6: add complete rcu protection around np->opt
  bpf: fix allocation warnings in bpf maps and integer overflow
  mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0
  net: mvneta: enable setting custom TX IP checksum limit
  net: mvneta: fix error path for building skb
  ...
2015-12-03 16:02:46 -08:00
Chris J Arges
444f9e99a8 livepatch: function,sympos scheme in livepatch sysfs directory
The following directory structure will allow for cases when the same
function name exists in a single object.
	/sys/kernel/livepatch/<patch>/<object>/<function,sympos>

The sympos number corresponds to the nth occurrence of the symbol name in
kallsyms for the patched object.

An example of patching multiple symbols can be found here:
	https://github.com/dynup/kpatch/issues/493

Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-03 23:01:27 +01:00
Jeff Kirsher
a3fb65680f e100.txt: Cleanup license info in kernel doc
Apparently the e100.txt document contained a "License" section left
over from days of old, which does not need to be in the kernel
documentation.  So clean it up..

CC: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2015-12-03 12:58:10 -08:00
Ludovic Desroches
cc018e3612 i2c: at91: add support for the HOLD field
The hold field allows to configure the data hold time which can be set
with the help of the generic binding 'i2c-sda-hold-time-ns'. This
feature has been introduced with SAMA5D4 SoC family.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-03 21:42:37 +01:00
Simon Horman
af8002d35c ravb: add device tree support for r8a779[123]
Simply document new compatibility strings.
As a previous patch adds a generic R-Car Gen2 compatibility string
there appears to be no need for a driver updates.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 15:01:08 -05:00
Simon Horman
0e8743611a ravb: add fallback compatibility strings
Add fallback compatibility strings for R-Car Gen 2 & 3 SoC Families.
This is in keeping with the fallback scheme being adopted wherever appropriate
for drivers for Renesas SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 15:01:08 -05:00
Will Deacon
24da208db3 arm64: enable HAVE_IRQ_TIME_ACCOUNTING
arm64 relies on the arm_arch_timer for sched_clock, so we can select
HAVE_IRQ_TIME_ACCOUNTING and have the core sched-clock code enable the
feature at runtime based on the rate.

Reported-by: Mario Smarduch <m.smarduch@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-12-03 19:37:10 +00:00
Daniel Baluta
4c3e2a4036 iio: Documentation: Add IIO configfs documentation
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Acked-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-03 18:19:28 +00:00
Ido Schimmel
c39d0454ec net: Add support for CHANGEUPPER notifier error injection
Since CHANGEUPPER can now fail, add support for it in the newly
introduced netdev notifier error injection infrastructure.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:23 -05:00
Dmitry Lifshitz
e1fdd060f0 ARM: dts: am57xx: sbc-am57x: add basic board support
SBC-AM57x is a single board computer designed for industrial and
embedded applications. It is based on the Texas Instruments Sitara AM57x
system-on-chip family. SBC-AM57x is implemented with the CL-SOM-AM57x
computer-on-module providing most of the functions, and SB-SOM-AM57x
carrier board providing additional peripheral functions and connectors.

https://www.compulab.co.il/products/sbcs/sbc-am57x-ti-am5728-am5718-single-board-computer/

https://www.compulab.co.il/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/

Add basic board support, including UART3, used as a serial console.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03 08:19:44 -08:00
Dmitry Lifshitz
387450fc88 ARM: dts: am57xx: cl-som-am57x: add basic module support
Add support for CompuLab CM-SOM-AM57X board.

CL-SOM-AM57x is a miniature System-on-Module (SoM) based on
TI Sitara AM57x ARM Cortex-A15 System-on-Chip family.

https://www.compulab.co.il/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/

Add basic DT support for standalone module (without a carrier board):

* Memory configuration
* Heartbeat led
* I2C1 and I2C4
* PMIC
* SATA

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03 08:19:12 -08:00
Nikita Kiryanov
02fc7720c6 ARM: dts: sb-som: introduce SB-SOM baseboard
CompuLab SB-SOM baseboard is a carrier board for multiple arm-based SoMs.
It currently supports (with minor adjustments to assembly) CM-T43, CM-T54,
and CM-QS600 modules. It is a building block in the SBC-T43 single board
computer, which consists of cm-t43 on top of sb-som-t43.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03 08:13:00 -08:00
Nikita Kiryanov
686c47f130 ARM: dts: am437x: cm-t43: add basic support for sbc-t43
Add basic support for SBC-T43: a CM-T43 based single board computer.
CM-T43 is an AM437x based System-on-Module designed to serve as a building
block in embedded applications. SBC-T43 is composed of CM-T43 module on
top of the SB-SOM-T43 baseboard.
Basic support includes UART, GPIO, and I2C.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03 08:12:56 -08:00
Chris Zhong
0e1410dda7 ARM: dts: rockchip: add veyron-mickey board
Also known as the Asus Chromebit.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Caesar Wang <wxt@rock-chips.com>
For the license change:
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-03 16:55:40 +01:00
Heiko Stuebner
6ea78309ad ARM: dts: rockchip: add veyron-brain board
Similar to pinky, brain is a development model and probably also
nearing extinction. But to keep pinky from being lonely I'll keep
the two brain boards around as well, especially as they as well
have easily accessible dut-connectors.

Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com>
For the license change:
Acked-by: Brian Norris <briannorris@chromium.org>
2015-12-03 16:55:37 +01:00
Dave Gerlach
fe9b867d24 Documentation: dt: add bindings for TI Wakeup M3 IPC device
Add the device tree bindings document for the TI Wakeup M3 IPC
device on AM33xx and AM43xx SoCs. These devices are used by the
TI wkup_m3_ipc driver, and contain the registers upon which the
IPC protocol to communicate with the Wakeup M3 processor is
implemented.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-03 07:24:05 -08:00
Hans Verkuil
85f9e06c59 [media] v4l2-dv-timings: add new arg to v4l2_match_dv_timings
Add the new match_reduced_fps argument to v4l2_match_dv_timings().
Depending on the situation you may or may not desire to match the
reduced_fps flag. Typically only HDMI transmitters will need to
check for this flag.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-03 11:26:14 -02:00
Chen-Yu Tsai
cc66ef3c39 irqchip/sunxi-nmi: Add sun9i-a80 variant to binding doc
sun9i A80 introduces a new variant of the NMI controller. The registers
are reordered, but the functionality remains the same.

Add a new compatible string for it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lkml.kernel.org/r/1449130813-22400-3-git-send-email-wens@csie.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-12-03 12:53:39 +00:00
Chen-Yu Tsai
57e7b08263 irqchip/sunxi-nmi: Rename binding doc filename to allwinner,sunxi-nmi.txt
The NMI controller is found in all Allwinner multi-core SoCs. It is not
limited to sun[67]i, nor is it always found in the "system controller"
block. On sun[68]i, it is in the RTC block, while on sun9i, it is in the
PRCM block.

Drop these 2 specific bits from the binding doc filename.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lkml.kernel.org/r/1449130813-22400-2-git-send-email-wens@csie.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-12-03 12:52:15 +00:00
Marcin Wojtas
9110ee0776 net: mvneta: enable setting custom TX IP checksum limit
Since Armada 38x SoC can support IP checksum for jumbo frames only on
a single port, it means that this feature should be enabled per-port,
rather than for the whole SoC.

This patch enables setting custom TX IP checksum limit by adding new
optional property to the mvneta device tree node. If not used, by
default 1600B is set for "marvell,armada-370-neta" and 9800B for other
strings, which ensures backward compatibility. Binding documentation
is updated accordingly.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02 23:35:05 -05:00
Adriana Reus
023e30fb0d Documentation: devicetree: Add property for controlling power saving mode for the us5182 als sensor
Add a property to allow changing the default power-saving mode.
By default, at read raw the chip will activate and provide
one measurent, then it will shut itself down. However, the
chip can also work in "continuous" mode which may be more reliable
but is also more power consuming.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-02 18:42:03 +00:00
Sascha Hauer
930cc0f39b dt-bindings: iio: adc: Update mcp342x binding for the mcp3421
The mcp3421 is the single channel variant of the mcp342x family and
can be supported by the mcp342x driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-02 18:27:09 +00:00
Caesar Wang
5378e28c97 arm64: dts: rockchip: add rk3368 evaluation board
This board is similar with the rk3288 evb board but the rk3368 top
board. There exist the act8846 as the pmic.

Moment, add the balight/thermal/emmc/usb.. stuff,
Let the board can happy work.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-02 00:35:22 +01:00
Lu Baolu
513072d90a usb: core: lpm: add sysfs node for usb3 lpm permit
USB3 LPM is default on in Linux kernel if both xHCI host controller
and the USB devices declare to be LPM-capable. Unfortunately, some
devices are known to work well with LPM disabled, but to be broken
if LPM is enabled, although it declares the LPM capability.  Users
won't be able to use this kind of devices, until someone puts them
in the kernel blacklist and gets the kernel upgraded.

This patch adds a sysfs node to permit or forbit USB3 LPM U1 or U2
entry for a port. The settings apply to both before and after device
enumeration. Supported values are "0" - neither u1 nor u2 permitted,
"u1" - only u1 is permitted, "u2" - only u2 is permitted, "u1_u2" -
both u1 and u2 are permitted. With this interface, users can use an
LPM-unfriendly USB device on a released Linux kernel.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01 14:58:18 -08:00
Lu Baolu
bf5ce5bf3c usb: core: lpm: fix usb3_hardware_lpm sysfs node
Commit 655fe4effe ("usbcore: add sysfs support to xHCI usb3
hardware LPM") introduced usb3_hardware_lpm sysfs node. This
doesn't show the correct status of USB3 U1 and U2 LPM status.

This patch fixes this by replacing usb3_hardware_lpm with two
nodes, usb3_hardware_lpm_u1 (for U1) and usb3_hardware_lpm_u2
(for U2), and recording the U1/U2 LPM status in right places.

This patch should be back-ported to kernels as old as 4.3,
that contains Commit 655fe4effe ("usbcore: add sysfs support
to xHCI usb3 hardware LPM").

Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01 14:58:18 -08:00
Arnd Bergmann
4c25c5d298 ARM: pxa: make more mach/*.h files local
Lots of header files are never included outside of a mach-pxa
directory and do not need to be made visible in include/mach,
so let's just move them all down one level.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01 21:52:50 +01:00
Arnd Bergmann
2bb8ad9b44 iio: exynos-adc: add experimental touchscreen support
This adds support for the touchscreen on Samsung s3c64xx.
The driver is completely untested but shows roughly how
it could be done, following the example of the at91 driver.

compared to the old plat-samsung/adc driver, there is
no support for prioritizing ts over other clients, nor
for oversampling. From my reading of the code, the
priorities didn't actually have any effect at all, but
the oversampling might be needed.

Verifying this driver is the main issue that is currently
holding up multiplatform support for s3c64xx, so any help
in testing is very much appreciated.

The current version uses the IS_REACHABLE() that is
going to be introduced in the linux-media tree, please
comment this out for testing.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-01 21:50:25 +01:00
Nikolay Aleksandrov
02fff96a79 net: add support for netdev notifier error injection
This module allows to insert errors in some of netdevice's notifier
events. All network drivers use these notifiers to signal various events
and to check if they are allowed, e.g. PRECHANGEMTU and CHANGEMTU
afterwards. Until recently I had to run failure tests by injecting
a custom module, but now this infrastructure makes it trivial to test
these failure paths. Some of the recent bugs I fixed were found using
this module.
Here's an example:
 $ cd /sys/kernel/debug/notifier-error-inject/netdev
 $ echo -22 > actions/NETDEV_CHANGEMTU/error
 $ ip link set eth0 mtu 1024
 RTNETLINK answers: Invalid argument

CC: Akinobu Mita <akinobu.mita@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev <netdev@vger.kernel.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01 15:31:57 -05:00
Chunfeng Yun
c74732e3c5 dt-bindings: Add a binding for Mediatek xHCI host controller
add a DT binding documentation of xHCI host controller for the
MT8173 SoC from Mediatek.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01 10:45:51 -08:00
Yoshihiro Shimoda
526a240f61 usb: host: xhci-plat: add support for the R-Car H3 xHCI controllers
The R-Car H3 has two xHCI controllers. This SoC is compatible with
R-Car Gen2 SoCs, however this SoC doesn't need some specific registers
setting, and need a new firmware.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01 10:45:51 -08:00