Commit graph

27,507 commits

Author SHA1 Message Date
Lee Jones
74b533c529 Merge branches 'ib-extcon-mfd-4.4', 'ib-mfd-i2c-v4.4', 'ib-mfd-power-4.4', 'ib-mfd-regmap-4.4' and 'ib-mfd-regulator-4.4' into ibs-for-mfd-merged 2015-10-26 14:48:22 +00:00
Andy Shevchenko
98a3be44ff mfd: core: redo ACPI matching of the children devices
There is at least one board on the market, i.e. Intel Galileo Gen2, that uses
_ADR to distinguish the devices under one actual device. Due to this we have to
improve the quirk in the MFD core to handle that board.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-26 15:25:53 +01:00
Takashi Iwai
d82ad8e0c0 ASoC: Updates for v4.4
Not much core work here, a few small tweaks to interfaces but mainly the
 changes here are driver ones.  Highlights include:
 
  - Updates to the topology userspace interface
  - Big updates to the Renesas support from Morimoto-san
  - Most of the support for Intel Sky Lake systems.
  - New drivers for Asahi Kasei Microdevices AK4613, Allwinnner A10,
    Cirrus Logic WM8998, Dialog DA7219, Nuvoton NAU8825 and Rockchip
    S/PDIF.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWLbbGAAoJECTWi3JdVIfQH7oH/1VdN2ozP9A03p24aC5qso1F
 VWOBnG4pkw1G6J5qK2lemMDeJdRdTfreICUAa9Tw9kOSfTIb6F3X8kCw8tbwlw0I
 4phgmyo23P53OfLZFMkQi/RCfwItnE0sszqhvoumUg0ryjYxg2JT+gTMgwvVo7Pq
 hf6m6a3we5pxLIIYP4wlQgOKwUJe4B4nC37ExySf24Dlo/DzmWDtfQbGvmyluFzb
 MB1qzEvAc/KC3LZFkIFmhfg2/caNRhcQrzkUCYrLR3t+oz9P1zCpYTII7VDdMg7L
 SM2VoL+ynEAdBqa38Ozwxvd/mpHwinlAeiikuwz1PyxVOqZvZqqiWzD8eUJkhZk=
 =/F/Q
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v4.4

Not much core work here, a few small tweaks to interfaces but mainly the
changes here are driver ones.  Highlights include:

 - Updates to the topology userspace interface
 - Big updates to the Renesas support from Morimoto-san
 - Most of the support for Intel Sky Lake systems.
 - New drivers for Asahi Kasei Microdevices AK4613, Allwinnner A10,
   Cirrus Logic WM8998, Dialog DA7219, Nuvoton NAU8825 and Rockchip
   S/PDIF.
 - A new driver for the Atmel Class D speaker drivers
2015-10-26 12:14:49 +01:00
Liviu Dudau
e8e1dc803f Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
ARM's Juno R1 board used PLDA XpressRICH3-AXI IP to implement a PCIe host
bridge. Introduce "plda" as vendor prefix for PLDA and document the DT
bindings for PLDA XpressRICH3-AXI IP as well as ARM's Juno R1.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
2015-10-26 10:02:37 +00:00
Olof Johansson
64ebda3acd Merge tag 'arm/soc/for-4.4/rpi-dt-v2' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains the DT changes for BCM2835 in 4.4.  It
pulls in clk/clk-bcm2835 (which Stephen Boyd has said would be stable)
because the DT changes to enable the clock driver need the driver
itself to be present. These changes include the following:

- Eric Anholt, moves the bcm2835 clock driver under bcm/ where it belongs with
  other Broadcom clock providers drivers, defines the binding for new clock
  driver, adds support for programming the BCM2835 audio domain, adds the DDC I2C
  controller to Device Tree, and finally migrates the Device Tree to use the new
  clock driver binding

- Lubomir Rintel adds support for the Raspberry Pi Model A+ and B revision 2, and
  remove the I2S controller which is non-existent on Raspberry Pi Model B

- Stefan Wahren adds an uart0 label for referencing the UART adapter

* tag 'arm/soc/for-4.4/rpi-dt-v2' of https://github.com/Broadcom/stblinux:
  ARM: bcm2835: Add the DDC I2C controller to the device tree.
  ARM: bcm2835: Switch to using the new clock driver support.
  ARM: bcm2835: dt: Add Raspberry Pi Model A+
  ARM: bcm2835: dt: Add Raspberry Pi Model B rev2
  ARM: bcm2835: dt: Raspberry Pi Model B had no I2S
  ARM: bcm2835: add label for uart0
  clk: bcm2835: Add support for programming the audio domain clocks
  clk: bcm2835: Add binding docs for the new platform clock driver.
  clk: bcm2835: Move under bcm/ with other Broadcom SoC clk drivers.

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26 14:27:33 +09:00
Rami Rosen
e58d154b60 ACPI / Documentation: add copy_dsdt to ACPI format options
commit aa2110cb1a (ACPI: add boot option acpi=copy_dsdt to fix corrupt
DSDT) added copy_dsdt as an ACPI boot option, but did not add it to ACPI
format options in Documentation/kernel-parameters.txt.  Fix that.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-26 04:57:47 +01:00
Mark Brown
9939b14b74 Merge remote-tracking branches 'asoc/topic/ssm2518' and 'asoc/topic/sunxi' into asoc-next 2015-10-26 11:16:16 +09:00
Mark Brown
71831ef699 Merge remote-tracking branches 'asoc/topic/rt298', 'asoc/topic/rt5640', 'asoc/topic/samsung' and 'asoc/topic/sh' into asoc-next 2015-10-26 11:16:13 +09:00
Mark Brown
512def88cb Merge remote-tracking branches 'asoc/topic/rcar', 'asoc/topic/rl6347a', 'asoc/topic/rockchip' and 'asoc/topic/rt286' into asoc-next 2015-10-26 11:16:10 +09:00
Mark Brown
3db5de560c Merge remote-tracking branches 'asoc/topic/nau8825' and 'asoc/topic/pxa' into asoc-next 2015-10-26 11:16:08 +09:00
Mark Brown
f72362e6b7 Merge remote-tracking branches 'asoc/topic/dwc', 'asoc/topic/es8328', 'asoc/topic/fsl' and 'asoc/topic/fsl-card' into asoc-next 2015-10-26 11:16:03 +09:00
Mark Brown
1c9d000c5b Merge remote-tracking branch 'asoc/topic/da7219' into asoc-next 2015-10-26 11:16:02 +09:00
Mark Brown
7034ef5f60 Merge remote-tracking branches 'asoc/topic/atmel-classd' and 'asoc/topic/da7213' into asoc-next 2015-10-26 11:16:00 +09:00
Mark Brown
7c9c29eefa ASoC: Updates for v4.4
A first batch of updates targetted at v4.4.  There are no substantial
 core fixes here, the biggest block of changes is updates to the rcar
 drivers and the addition of a CODEC driver for the AK4613.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWBF7yAAoJECTWi3JdVIfQ1MEH/jnzSyEVIuG+l8UkMaz6gf4w
 zGsM1KCn//mfPl7yAoOdsnElOLR+Fmf+0jx4pCPQKrjvBGwjwH/IwBR1rwuEeUPY
 7d66efpWOKlTf3qpsF1S7ZIlAZOs0NFvo0jwA1ZY/pc3YEBekyWxbABk/uWAVrM5
 HJJKafI7WeiYrF0l0z2sG7BpsFtr8JKqrOVM+SGaPTNn2k+/lQ1bwTk1liOEUbsv
 oq8NFNrUWPBCwbUNJQxBOvmoXC6Oa6+JBVO3+SsoS0q2FweNpqtZopjmoqHM8CiN
 SkBeFT+wYlSGSnnFgAXXA2+kq74TeP2CvToo6tw+gf4LZXydKIaAdeuT6M9weZA=
 =8h3u
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.3-rc2' into asoc-next

ASoC: Updates for v4.4

A first batch of updates targetted at v4.4.  There are no substantial
core fixes here, the biggest block of changes is updates to the rcar
drivers and the addition of a CODEC driver for the AK4613.

# gpg: Signature made Fri 25 Sep 2015 05:37:06 KST using RSA key ID 5D5487D0
# gpg: key CD7BEEBC: no public key for trusted key - skipped
# gpg: key CD7BEEBC marked as ultimately trusted
# gpg: key AF88CD16: no public key for trusted key - skipped
# gpg: key AF88CD16 marked as ultimately trusted
# gpg: key 16005C11: no public key for trusted key - skipped
# gpg: key 16005C11 marked as ultimately trusted
# gpg: key 5621E907: no public key for trusted key - skipped
# gpg: key 5621E907 marked as ultimately trusted
# gpg: key 5C6153AD: no public key for trusted key - skipped
# gpg: key 5C6153AD marked as ultimately trusted
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"
2015-10-26 11:15:54 +09:00
Olof Johansson
156746b173 Samsung SoC updates for v4.4
- use PWM lookup table with pwm_add_table() for the following boards
   : s3c24xx h1940 and rx1950
   : s3c64xx smdk6410, crag6410, hmt and smartq
 - document: update bootloader interface on exynos542x
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJWKqBPAAoJEA0Cl+kVi2xqNdYP/2+gSZzDvO7u3nsKrnjfzZHC
 aATQ02guR1vCc8gPaEcTZQOENz1RKL1hjvoplzWCqEcjxcv0JWUoEbmSSe8mQMYL
 1j8bBo0acv4qbzyTC1OTIlEreN6eG5jo6eGJ2IX6VW813uB6wZcYeduB/53/BB1V
 /frScMvbmqS8bFvasq3tKo/u01z5BONoKbSeMkqNBZpAlBscRCTo7R231ElkUFRs
 jU2BUBusaPechxtN+Wq0TSvnHZw9ctOk04pIn9Uorkx4Y9NEiBppu75tBR5ub+8s
 IHtWR0ZeW/ceXMeHoMF4KREByv7EnXPOcdrIP60/uizMIGfkmZrX3Anfk2ir0j7u
 pKChXHYR/bw1timnaA9GrCKmQimlp8SX4m3NpRW2tTq13IT9W7drZhvzucNsPjrI
 XabZBbqXIFJ3+BrQXvYj+YiGTTKPlrxqOY4otI4Iu2w23qn5CPvjK5vU4i77pCUs
 tVQAFlrMO5woT7P1cj+cWe3pudbdYsSDm3LYZ+n4G5DpuPPmYVSGFmFXIAGQNeea
 qCLbb71uKU5J6hgwOLMMZEegrmSudQc2Up6zfuMd2KYdBelGVgOVDeDP24lsEcJ1
 zTg0JCVOuAmOaLB3H8HxsjO6cTecUaXdA/bxFhFBFoEKuDHEQ7U7VZFbilfifXLq
 JbakpmwHGZPKI2LuCKCj
 =jIwh
 -----END PGP SIGNATURE-----

Merge tag 'samsung-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

Samsung SoC updates for v4.4

- use PWM lookup table with pwm_add_table() for the following boards
  : s3c24xx h1940 and rx1950
  : s3c64xx smdk6410, crag6410, hmt and smartq
- document: update bootloader interface on exynos542x

* tag 'samsung-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  Documentation: EXYNOS: Update bootloader interface on exynos542x
  ARM: S3C64XX: Use PWM lookup table for mach-smartq
  ARM: S3C64XX: Use PWM lookup table for mach-hmt
  ARM: S3C64XX: Use PWM lookup table for mach-crag6410
  ARM: S3C64XX: Use PWM lookup table for smdk6410
  ARM: S3C24XX: Use PWM lookup table for mach-rx1950
  ARM: S3C24XX: Use PWM lookup table for mach-h1940

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26 10:18:41 +09:00
Olof Johansson
99b6eb55ce Samsung 2nd DT updates for v4.4
- use exynos5420-dw-mshc instead of exynos5250 for exynos3250
 - add DISP1 clocks and the DISP1 power domain of two closk
   on exynos5250 (clock commit got Stephen's ack)
 - add vbus regulators on exynos3250, exynos4210 and exynos4412 boards
 - fix typo in regulator enable GPIO property on s5pv20-aquila and goni
 - document: correct the example of exynos power domain clocks
 - document: consolidate exynos SoC dt-bindings and non-Samsung
   boards related compatibles (FriendlyARM, Google, Hardkernel
   and Insignal)
 - update MAINTAINER entries accordingly (documentation)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJWKp8kAAoJEA0Cl+kVi2xq5fUP/Rf+zO2xnnM+nW31k/6GCQQu
 4BgjBfiK6/coAfQ+mq1PNs3aOFDUmO1g3vwoly64vJbhylCd6jFEzPlbgb109ZnI
 A7JrqoiZ0LE+i/RXjfgxJm/0v1gn7TOOBKkwWlIEJpgV7i8wWjdCnMxlNw+amSGF
 H0pJ14TCN7OfsPZtX1S7dgz/dLSeQzCzMn8cJk4ccPcsN+1LqI4whFQ31ykOYCaT
 5b3/EvORjqkn0gdEiQ/i2WtaM1yKgfNUYXaJP69j605ipzKaUCMt9WnBY9EB6RaJ
 im36eKNQXW73dYGEuuf1I5L58Hb+poAmlz4TtI4re/ykQ1mrvOj1xYwgfD9Sjw+z
 ZS4Io5WMZgdJrmMXFPxnd7BQHu4IbnEfU+408cgOVP/fPrAHxYtO8tVr7/n2lgJ3
 3Hio2MBzAWAXMz45IfhCz2n/ITKBCkfjHFOkno7Rmmm/83cORM6ZleldMqtrj5sQ
 oqGDcBwI0ijKptZIfaLFQfndMmzUd4t5i+UQTjyIDE1nBmvPyqHgPyetHQttQQM+
 bWTCJU+SlKze7CIwogmrrFEfw2RhNU+FS/T9D7t5JCWLb4B5CgLnHt7NWth2cQUQ
 NuiTIgoU+znke+t2A1PxE85CmBr5yuezqxq8bJv8qnGHrF/ougPaNCOdXPef0ci4
 bfK3nV/axFga/7ag900e
 =UPmG
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Samsung 2nd DT updates for v4.4

- use exynos5420-dw-mshc instead of exynos5250 for exynos3250
- add DISP1 clocks and the DISP1 power domain of two closk
  on exynos5250 (clock commit got Stephen's ack)
- add vbus regulators on exynos3250, exynos4210 and exynos4412 boards
- fix typo in regulator enable GPIO property on s5pv20-aquila and goni
- document: correct the example of exynos power domain clocks
- document: consolidate exynos SoC dt-bindings and non-Samsung
  boards related compatibles (FriendlyARM, Google, Hardkernel
  and Insignal)
- update MAINTAINER entries accordingly (documentation)

* tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  MAINTAINERS: Add documentation and dt-bindings for exynos stuff
  dt-bindings: EXYNOS: Document compatibles from other vendors
  dt-bindings: Consolidate Exynos SoC bindings
  ARM: dts: Add clocks to DISP1 domain in exynos5250
  dt-bindings: Correct the example for Exynos power domain clocks
  ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-goni
  ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-aquila
  ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards
  clk: samsung: exynos5250: Add DISP1 clocks
  ARM: dts: use exynos5420-dw-mshc compatible for exynos3250

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26 10:13:50 +09:00
Chen-Yu Tsai
4a5705a9c2 bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
Reduced Serial Bus is a proprietary 2-line push-pull serial bus supporting
multiple slave devices. It was developed by Allwinner, Inc. and used by
Allwinner and X-Powers, Inc. for their line of PMICs and other peripheral
ICs.

Recent Allwinner SoCs, starting with the A23, have an RSB controller. This
is used to talk to the PMIC, and later with the A80 and A83 platform, the
audio codec IC.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26 10:11:55 +09:00
Olof Johansson
a5ac4a66c6 mvebu soc for 4.4 (part 2)
- Use mac_pton() helper in the oropn5x board instead of duplicating it
 - Add the broken-idle option allowing to boot boards with a mistake in
   the hardware design
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlYqU/AACgkQCwYYjhRyO9VP1gCfcJsUQ9UlgCypLYuK7FqQShf6
 vnEAn3QT7pXLmwYNlRFI6EF8y6l5bgH9
 =HKUh
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-soc-4.4-2' of git://git.infradead.org/linux-mvebu into next/soc

mvebu soc for 4.4 (part 2)

- Use mac_pton() helper in the oropn5x board instead of duplicating it
- Add the broken-idle option allowing to boot boards with a mistake in
  the hardware design

* tag 'mvebu-soc-4.4-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: add broken-idle option
  ARM: orion5x: use mac_pton() helper

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-26 09:58:26 +09:00
Greg Kroah-Hartman
0bbc367e21 Merge 4.3-rc7 into usb-next
We want the USB and other fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-26 06:39:46 +09:00
Dustin Byford
8eb5c87a92 i2c: add ACPI support for I2C mux ports
Although I2C mux devices are easily enumerated using ACPI (_HID/_CID or
device property compatible string match), enumerating I2C client devices
connected through an I2C mux needs a little extra work.

This change implements a method for describing an I2C device hierarchy that
includes mux devices by using an ACPI Device() for each mux channel along
with an _ADR to set the channel number for the device.  See
Documentation/acpi/i2c-muxes.txt for a simple example.

To make this work the ismt, i801, and designware pci/platform devs now
share an ACPI companion with their I2C adapter dev similar to how it's done
in OF.  This is done on the assumption that power management functions will
not be called directly on the I2C dev that is sharing the ACPI node.

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dustin Byford <dustin@cumulusnetworks.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-25 15:49:46 +01:00
Javier Martinez Canillas
3a872138e4 iio: adc: mcp320x: Deprecated compatible strings with no vendor prefix
The Microchip Analog to Digital Converter (ADC) Device Tree binding
documents compatible strings with no vendor prefix. Since it should
compatible strings with also a vendor, add these to the binding doc
and mark the old ones as deprecated.

The driver says that the device is from Microchip Technology which
is listed in Documentation/devicetree/bindings/vendor-prefixes.txt
so use the documented prefix.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-25 12:35:42 +00:00
Marek Belisko
f0b1643581 iio:adc:palmas: add DT support
Code was found at:
https://android.googlesource.com/kernel/tegra/+/a90856a6626d502d42c6e7abccbdf9d730b36270%5E%21/#F1

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Marek Belisko <marek@goldelico.com> [Fixed minor typos + add channels list to documentation]
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-25 12:05:49 +00:00
Martin Kepplinger
d2a3e0931a iio: mma8452: support either of the available interrupt pins
This change is important in order for everyone to be easily able to use the
driver for one of the supported accelerometer chips!

Until now, the driver blindly assumed that the INT1 interrupt line is wired
on a user's board. But these devices have 2 interrupt lines and can route
their interrupt sources to one of them. Now, if "INT2" is found and matches
i2c_client->irq, INT2 will be used.

The chip's default actually is INT2, which is why probably many boards will
have it wired and can make use of this.

Of course, this also falls back to assuming INT1, so for existing users
nothing will break. The new functionality is described in the bindings doc.

Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
For the binding: Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-25 11:02:42 +00:00
David S. Miller
ba3e2084f2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/ipv6/xfrm6_output.c
	net/openvswitch/flow_netlink.c
	net/openvswitch/vport-gre.c
	net/openvswitch/vport-vxlan.c
	net/openvswitch/vport.c
	net/openvswitch/vport.h

The openvswitch conflicts were overlapping changes.  One was
the egress tunnel info fix in 'net' and the other was the
vport ->send() op simplification in 'net-next'.

The xfrm6_output.c conflicts was also a simplification
overlapping a bug fix.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24 06:54:12 -07:00
Bhupesh Sharma
736c16d37f doc: DTS: Update DWC3 binding to provide reference to generic bindings
Since the Synopsys DWC3 controller driver inherits the generic bindings
defined in 'usb/generic.txt', this patch tries to capture the same in
the DWC3 binging documentation to avoid any confusion in usage of properties
like 'dr_mode' for certain SoCs like FSL LS2080A.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-23 22:30:28 +02:00
Bhupesh Sharma
aef9ee29fa doc/bindings: Update GPIO devicetree binding documentation for LS2080A
Update the FSL, GPIO binding documentation to add support
for GPIO controller found on Freescale's LS2080A platform.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-23 22:30:20 +02:00
Bhupesh Sharma
a2cce7a9f1 Documentation/dts: Move FSL board-specific bindings out of /powerpc
Since the same board components can be used across ARM and PPC board families,
this patch moves the FSL board-specific bindings out of bindings/powerpci.

While at it, this patch also adds the bindings for QIXIS FPGA controller
found on FSL LS2080A boards. These boards have an on-board FPGA/CPLD
connected to the IFC controller.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Jaiprakash Singh <b44839@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-23 22:24:45 +02:00
Bhupesh Sharma
cc56a128a5 Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards
This patch adds a devicetree binding documentation for Freescale's
LS2080A QDS and RDB boards.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-23 22:24:37 +02:00
Bhupesh Sharma
f43a4b8507 arm64: Rename FSL LS2085A SoC support code to LS2080A
Freescale is renaming the LS2085A SoC to LS2080A. This patch
addresses the same.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-23 22:24:29 +02:00
Bhupesh Sharma
53a5fde05d arm64: Use generic Layerscape SoC family naming
Freescale will be a spinning-out a set of ARMv8 based SoCs which
will be based on a similar overall SoC architecture. So, this patch
converts the existing infrastructure in the arm64/dts, arm64/Kconfig
and arm64/configs to use the generic convention ARCH_LAYERSCAPE
in place of the more specific FSL_LS2085A, to save code duplication
later-on.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-23 22:24:21 +02:00
Krzysztof Kozlowski
18f4ce7157 dt-bindings: EXYNOS: Document compatibles from other vendors
Document compatibles used on other Exynos-based boards (non-Samsung):
FriendlyARM, Google, Hardkernel and Insignal.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Hakjoo Kim <ruppi.kim@hardkernel.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-24 05:07:06 +09:00
Krzysztof Kozlowski
068812ed10 dt-bindings: Consolidate Exynos SoC bindings
Exynos SoC Device Tree bindings are spread over arm/exynos/ and
arm/samsung/ directories. There is no need for that separation and it
actually confuses. Put power domain bindings under power/ and
remaining samsung-boards.txt under arm/samsung/.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-24 05:07:02 +09:00
Gao Pan
1c4b6c3bcf i2c: imx: implement bus recovery
Implement bus recovery methods for i2c-imx so we can recover from
situations where SCL/SDA are stuck low.

Once i2c bus SCL/SDA are stuck low during transfer, config the i2c
pinctrl to gpio mode by calling pinctrl sleep set function, and then
use GPIO to emulate the i2c protocol to send nine dummy clock to recover
i2c device. After recovery, set i2c pinctrl to default group setting.

Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Gao Pan <b54642@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-23 21:55:50 +02:00
Andy Shevchenko
62a615e083 mfd: core: redo ACPI matching of the children devices
There is at least one board on the market, i.e. Intel Galileo Gen2, that uses
_ADR to distinguish the devices under one actual device. Due to this we have to
improve the quirk in the MFD core to handle that board.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-23 21:55:46 +02:00
Masahiro Yamada
6a62974b66 i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver
Add support for on-chip I2C controller used on newer UniPhier SoCs
such as PH1-Pro4, PH1-Pro5, etc.  This adapter is equipped with
8-depth TX/RX FIFOs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-23 21:55:46 +02:00
Masahiro Yamada
dd6fd4a327 i2c: uniphier: add UniPhier FIFO-less I2C driver
Add support for on-chip I2C controller used on old UniPhier SoCs
such as PH1-LD4, PH1-sLD8, etc.  This adapter is so simple that
it has no FIFO in it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-23 21:55:45 +02:00
Krzysztof Kozlowski
97d5c7a77e Documentation: EXYNOS: Update bootloader interface on exynos542x
Update the documentation about:
1. Usage of PMU_SPARE2 register.
   Bootloaders on Exynos542x-based boards often use the register
   PMU_SPARE2 (0x908) in the same way as on Exynos3250: as a indicator
   the secondary CPU was booted on. The bootloader will set this value
   to non-zero, after sucessfull power up of secondary CPU. In the same
   time this booted CPU will stuck (spin) waiting for software reset.
2. Exynos542x entry address for secondary CPU boot up after system
   suspend (with MCPM enabled and in non-secure mode).

See arch/arm/mach-exynos/mcpm-exynos.c for source code.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-24 04:43:31 +09:00
Krzysztof Kozlowski
ae8a2881b5 dt-bindings: Correct the example for Exynos power domain clocks
Since commit 29e5eea06b ("ARM: EXYNOS: Get current parent clock for
power domain on/off") the "pclkN" names of "clock-names" property is not
parsed any more. The bindings and driver were updated but the example
was not. Fix the example now.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-24 04:31:40 +09:00
Ley Foon Tan
eaa6111b70 PCI: altera: Add Altera PCIe host controller driver
Add the Altera PCIe host controller driver.

[bhelgaas: whitespace, fold in DT and maintainer updates, OF_PCI
dependency from Arnd]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Rob Herring <robh@kernel.org> (DT binding)
2015-10-23 13:24:56 -05:00
Olof Johansson
355d1ef1ad The i.MX device tree changes for 4.4:
- Add IOMUXC LPSR (Low Power State Retention) device for i.MX7D.
  - Add a few low power mode related devices and touch controller for
    i.MX6UL.
  - Add a number of devices for i.MX7D SDB board support, USB, Dual FEC,
    and eMMC5.0.
  - i.MX6 Boundary Devices updates: relicense under GPLv2/X11, add Okaya
    LCD, touch and wifi support, add new boards Nitrogen6_Lite and
    Nitrogen6_Max.
  - Enable touch screen and NAND Flash controller for a few Vybrid
    devices.
  - Some random and small updates on LS1021A and MXS support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWJQUPAAoJEFBXWFqHsHzOo+cH/irx+abVdFV97q6M0VwFsQ3/
 Tf4/CsdiTjM5ZDrKZEtXzP8BZl+ZO4tQXLspP+wVceQ+PVUiVvdAHu0l68iuJRrA
 +Bj9VrLIzMDf7FVpzbZHZD3kd1NALGh/5i0TerkuZMNl1KH57HyGjLnjKH43n7uz
 mFPeZFAQMwSjEnRJj/6217Itqi+LurARJsnXQs6uhQ7feSsA88HU3EQ8QsiZqiAu
 MULAJBYaE09shlokuXIKx67t8outdb8C0Uue64nt42y8NR0m5eVVG7NJoF+23T6C
 CRX5zveYa7D2QXTkihvjdRpazhLiPnwV3RCVejLOZMk0G14hD9U39jkTp+9ws1w=
 =kPBq
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

The i.MX device tree changes for 4.4:
 - Add IOMUXC LPSR (Low Power State Retention) device for i.MX7D.
 - Add a few low power mode related devices and touch controller for
   i.MX6UL.
 - Add a number of devices for i.MX7D SDB board support, USB, Dual FEC,
   and eMMC5.0.
 - i.MX6 Boundary Devices updates: relicense under GPLv2/X11, add Okaya
   LCD, touch and wifi support, add new boards Nitrogen6_Lite and
   Nitrogen6_Max.
 - Enable touch screen and NAND Flash controller for a few Vybrid
   devices.
 - Some random and small updates on LS1021A and MXS support.

* tag 'imx-dt-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits)
  ARM: dts: ls1021a: Add quirk for Erratum A009116
  ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property
  ARM: dts: imx6: phyFLEX: fix typo in "pinctrl-names"
  ARM: dts: imx6: change the core clock of spdif
  ARM: dts: vf-colibri: enable NAND flash controller
  ARM: dts: vf610twr: add NAND flash controller peripherial
  ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board
  ARM: dts: imx: add Boundary Devices Nitrogen6_Max board
  ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices
  ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices
  of: Add Boundary Devices Inc. vendor prefix
  ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11
  ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11
  ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support
  ARM: dts: imx6dql-nitrogen6x: add touchscreen support
  ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel
  ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
  ARM: dts: vf500-colibri: Add device tree node for touchscreen support
  ARM: dts: i.MX35: fix cpu compatible value
  ARM: dts: i.MX31: fix cpu compatible value
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23 10:51:21 -07:00
Olof Johansson
de0b2a545c Delete regulator-compatible usage in mt8135-evbp1.dts.
The regualtor-compatible binding is deprecated, instead the node name
 is used.
 
 Mediatek timer driver supports as well mt8127, mt8135 and mt8173. Add
 these SOCs to the bindings list.
 
 Power domains venc and venc_lt need clocks two extra clocks to access
 their registers. We update the bindings documentation about this.
 
 Update SMP bindings documentation by adding support for mt6589 and mt81xx SOCs.
 
 Update mt8127.dtsi and mt8135.dtsi to enable SMP support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWI4nIAAoJELQ5Ylss8dNDznQQAK9O/IgeKz069P+UT/HxnflC
 K21RbkMX5KKej8QS23yqYxZVz+c2HyZLpYF5sAl/k9p5oMsm1EvfNVfDC7acWmfM
 CY65ZgNOPixi9Yrd29qgN0IMtTzsQtMnS7dhiKloyZr9sszuRw0SHeAQOOjGFv2H
 rZ+N7fbH3RH6vDeWIurVY8bNppu3FJNeIFm6xbotiXcQvsXX8hJjoN6E8BI7Rzg+
 i/p80IEmGRFvxHebZjrRCgVFIdqIfo0M02kxNVc4erH+Z7mLOmHZuYXIg7S3825M
 E5W+mJd6fqNh62qbPZUi2/0Y9TAsOPiIpxU+QDp2cBO37nse2/MeWPhJyg6DfCO/
 RuC0Y+tJx1fxF+5+/7lkXeWqsvzo5twJTGcLu+D0pPSTVb5Gy0P9671QMJPBknf+
 6zy4qqjSYNpsIz+OqbwlZHeQJEuDjt/DEVWqFmvW3DoUr5O8hRjHpFa4lJ6F084u
 tvSkSOuiJKtO1htAZLeVmMQOYylAPxpxKTc1AqIcLIiBkgkNKhz7v43vtdwETNIv
 8qkJVNKGF8WNDdskM2/GamlC2hTabw8kMoPxeYtqzZz5BYBALeOND0TvclEMecnh
 nDzdTwlhJDdHOlT5hQ7ur9UecakFQSMzQnoJ35LbjU+lVKXOyFIphXuBAmlX7Fvi
 hgbvHY7WClquwgKJ+PUF
 =Lj7i
 -----END PGP SIGNATURE-----

Merge tag 'v4.3-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt

Delete regulator-compatible usage in mt8135-evbp1.dts.
The regualtor-compatible binding is deprecated, instead the node name
is used.

Mediatek timer driver supports as well mt8127, mt8135 and mt8173. Add
these SOCs to the bindings list.

Power domains venc and venc_lt need clocks two extra clocks to access
their registers. We update the bindings documentation about this.

Update SMP bindings documentation by adding support for mt6589 and mt81xx SOCs.

Update mt8127.dtsi and mt8135.dtsi to enable SMP support.

* tag 'v4.3-next-dts' of https://github.com/mbgg/linux-mediatek:
  ARM: dts: mt8127: enable basic SMP bringup for mt8127
  ARM: dts: mt8135: enable basic SMP bringup for mt8135
  devicetree: bindings: add new SMP enable method Mediatek SoC
  dt-bindings: soc: Add clocks for Mediatek SCPSYS unit
  dt-bindings: add more MediaTek SoC to mtk-timer binding
  ARM: dts: mt8135-evbp1: remove regulator-compatible usage

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23 10:24:44 -07:00
Olof Johansson
fc1f61f1c0 Allwinner core changes for 4.4
Add support for the Allwinner R8 SoC used in the CHIP.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWInwoAAoJEBx+YmzsjxAgrsAQAIS7IN6NqaQRMv/H8pOGMqWH
 tn2jCqQBavzIRJ8WK/ny+umkM1t7WC9kNVvU/hMO3LoFhjXRXDWZSBaIQv4dnGFM
 o7Iw09A9pci4VDvUqnyUiLcYq2azhdKbjMSwVsWx92zWx3j2L+iG6d3FJrDDyNBT
 eXDjsvuhQVxE653a9hon1aFFH28wbJhPvpzf31m0J96o4fmizvmyZvIB2cc8BBmy
 qLnbhxCkG2FxDkM8vAXfpDF7ypDEzn/rG3/mHXX+tjDY3Fk+53WzAfIqBhnSPJzN
 Zrv2ffn2K/n28rjUMSfSkThKGMTWriyKgNy+OosDrEUpX/FsU55BX5oNSDlDS9N5
 0cK4dmHUwf1YIes5dum5XoeJd9Tq3vyJUsD7/+OhuMLTSyGxmjAZD6tu3ldmZ9pC
 7Fwa8ZTr2YagmNwXdvxq6DbcLTEuNZH+7ztr/prhBn5DQfvPWTX+r4cKYjG9SApX
 XVJ5UZb+zkTVPAUSVKJOdiiKmuiibkNAL4isMPj3KKqYIXdsMysgVmsDyr3b00B1
 0K5zrDU0mjZHohfNJ3ppjilcLtq/iimH3UAgGa77vGYF3BPosf8kq96BbqL+s5Hx
 CMbnA4FRpFdSvWXi1qiPwnN9BzU82OPVRti4o6OdY8BJlSg0dTp7ngnuIrz7HT5/
 UWtveTP1w/ePlnlaY4NE
 =o6P8
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-core-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/soc

Allwinner core changes for 4.4

Add support for the Allwinner R8 SoC used in the CHIP.

* tag 'sunxi-core-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi: Add R8 support

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23 10:19:36 -07:00
Olof Johansson
fe9990f9fd Some fixes for the new power-domain driver, including restricting
Rockchip Kconfig options, fixing a possible null-pointer and a
 typo in the dt-bindings.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJWIlknAAoJEPOmecmc0R2BrTkH/3w+1ZZuvtfQmzBkPwJGJ9vJ
 zZFZLZqD0NADib8sOhFnJxTfxrhoE/Bfijqk4wPfjdKta2GABfljGbLDanQB8Yr9
 Ip+fyflQ6cd925dEuPccHMbumZep+QuSIGYjOGFIuRbbjCdOY5MB+I2Yhvognwus
 Xh4FtjS7CL6ruotmyOcMtnpNDCAvc8NSwO7xBqxYRPcgd+DY8+86cD/dUpvmD4Kr
 pGtUXkfQpAjBhV9P6RuP63gO42JD1VMb7c6idd+B/tzbJxI08CTDolwqvyujVkHf
 KeRvu7g8qKKUwL5ffOImR4tR/T2o1wDLwfxuUJXW+mIVJa72qA+h90aNOhM2iC8=
 =Qk94
 -----END PGP SIGNATURE-----

Merge tag 'v4.4-rockchip-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers

Some fixes for the new power-domain driver, including restricting
Rockchip Kconfig options, fixing a possible null-pointer and a
typo in the dt-bindings.

* tag 'v4.4-rockchip-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  dt-bindings: Correct paths in Rockchip power domains binding document
  soc: rockchip: power-domain: don't try to print the clock name in error case
  soc: rockchip: Restrict to ARCH_ROCKCHIP

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23 10:18:34 -07:00
Olof Johansson
7b6e28c38f This is the pxa changes for v4.4 cycle.
This cycle is bigger than usual :
  - magician was greatly enhanced (new IPs discovered, ...)
  - almost all legacy board files have been updated to the
    new PWM API (mostly for backlight control)
  - some minor fixes in raumfeld, z2 and mioa701
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWIUerAAoJEAP2et0duMsSXJMP/1kwWNgYQ31/cfiOthod6pR3
 HTNSGbtA6bSAflb1/TQ79+PvAVa0JOBF9Hl22+EwSwsc/e005sMgxcw+bsOraSF4
 5Xf8jCTL6kjbusCFJER7WRo1/io5IU/rXTjmH5+XbfaKx9DsJqifvMosCukm+84b
 7hGZ5lQRNVMkDd4RmrBi6C0OBVrhnpH7bzCrTFvKTKGpIs/EPvuyZz5LJT8Qyvcg
 oDGneKAB+Xj0NoKnXB1kJgCufx6zYH7sQf6aG9Riul0shFvN3qC0QrOTpj/CO40y
 bQzrObvIL87n8YtaqsDbl9tGcs1MhuQIf5Z8xhzVs2qXF3K4Yd4zhMM9gqzpxVXc
 gIlQ/a+eaLfMNBFwB55ER/cDxzglCpxsYZi6uCVejapY+dm0l2noZMeeT5RvinHf
 xuVQyBZrl/IOIiZWed7/ZcGsZzS9AtkLu4FvhZO9y7HNkBdNO9QTpxR+LADkAz8F
 dnvXiSiiESmOsvDsawsgFYcz5GrltxPSGYNGVKpbsq4F5w3t3aNn9znrX6mwFEo1
 tVS1xxt5+v90O4bMv1xTWLLugJJi+YD0naosZxUNuQ6jeCks+EzZ1RMXxWkOdD9x
 F5Trh2xYDnr8wOqhVVkGDTwZeEwaHkxIiVK/CBUswOvS4VpyjT1gMuYk7PmXSnrE
 z8/k/nV2zQ6aFKohGai2
 =wWU6
 -----END PGP SIGNATURE-----

Merge tag 'pxa-for-4.4' of https://github.com/rjarzmik/linux into next/cleanup

This is the pxa changes for v4.4 cycle.

This cycle is bigger than usual :
 - magician was greatly enhanced (new IPs discovered, ...)
 - almost all legacy board files have been updated to the
   new PWM API (mostly for backlight control)
 - some minor fixes in raumfeld, z2 and mioa701

* tag 'pxa-for-4.4' of https://github.com/rjarzmik/linux: (44 commits)
  ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode
  ARM: pxa: raumfeld: make some variables static
  ARM: pxa: magician: Remove pdata for pasic3-leds
  ARM: pxa: magician: Add support for PXA27x UDC
  ARM: pxa: magician: Add support for MAX1587A Vcore regulator
  ARM: pxa: magician: Change comments to be more informative
  ARM: pxa: magician: Move platform_add_devices() to the end of magician_init()
  ARM: pxa: magician: Add missing regulator for PWM backlight
  ARM: pxa: magician: Add debug message for backlight brightness function
  ARM: pxa: magician: Remove definition of the STUART port
  ARM: pxa: magician: Fix wrongly enabled USB host ports
  ARM: pxa: magician: Fix support for Intel Strata NOR Flash
  ARM: pxa: magician: Fix redundant GPIO request for pxaficp_ir
  ARM: pxa: magician: Fix platform data for both PXA27x I2C controllers
  ARM: pxa: magician: Fix and add charging detection functions
  ARM: pxa: magician: Optimize Samsung LCD refresh to 50Hz
  ARM: pxa: magician: Rename charger cable detection EGPIOs
  ARM: pxa: magician: Optimize powerup delays for Samsung LCD
  ARM: pxa: magician: Rename abstract LCD GPIOs
  ARM: pxa: magician: Add new discovered EGPIO pins
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-23 10:15:03 -07:00
Vincent Donnefort
9d2ea95a59 ARM: mvebu: add broken-idle option
The broken-idle option can be activated from the coherency-fabric DT
node. This property allows to disable the idle capability, when the
hardware doesn't support it, like the Seagate Personal Cloud boards.

Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-10-23 17:34:37 +02:00
Dave Gerlach
8e3c595214 mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle
The mailbox framework controls the transmission queue and requires
either its controller implementations or clients to run the state
machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready
interrupt as the equivalent of a Tx-done interrupt to run this Tx
queue state-machine.

The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload
certain PM tasks, like doing the necessary operations for Device
PM suspend/resume or for entering lower c-states during cpuidle.

The CPUIdle on AM33xx requires the messages to be sent without
having to trigger the Tx-ready interrupts, as the interrupt
would immediately terminate the CPUIdle operation. Support for
this has been added by introducing a DT quirk, "ti,mbox-send-noirq"
and using it to modify the normal OMAP mailbox controller behavior
on the sub-mailboxes used to communicate with the WkupM3 remote
processor. This also requires the wkup_m3_ipc driver to adjust
its mailbox usage logic to run the Tx state machine.

NOTE:
- AM43xx does not communicate with WkupM3 for CPU Idle, so is
  not affected by this behavior. But, it uses the same IPC driver
  for PM suspend/resume functionality, so requires the quirk as
  well, because of changes to the common wkup_m3_ipc driver.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[s-anna@ti.com: revise logic and update comments/patch description]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-10-23 11:19:27 +05:30
Takashi Iwai
274035751e Merge branch 'topic/hw-constraint-single' into for-next 2015-10-23 06:57:50 +02:00
Greg Kroah-Hartman
9e43643b11 USB Chipidea updates for v4.4-rc1
- Use extcon framework for VBUS and ID detect
 - Add imx6sx and imx7d support
 - Other small changes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWKEKdAAoJEEhZKYFQ1nG7dysH/jmFSatDJvgA7woliRZ7p0H/
 elNu6AOjqBnsi23Vp54IOVWYTVIDhLsXxlzEOgO6XXfsI99TqFQIIS2VYSo6xues
 Eq5hIxh5n9uue3VMnw9bxYHcFkFG9LDAlyMXecEayAB74UqnQLbo2bRDfnSopaf1
 dEOq9mdT8llYbtVww6bVXtL78wgwxVk1gTfISllxgt7DEuYwgT+gQJCDLrmkGPn0
 XfiaZWamNmDlQd4z/qqoG65+yNmZZMZQKtugCx4MoiBbHVclRN7j2eNsCZ0y6dsZ
 qxs+CazL/IeYCqxRRXl5Fopraer1uJeOPeFgA+lRV6WPhMEe7eg6ojkDp/8Y18Y=
 =Dh+g
 -----END PGP SIGNATURE-----

Merge tag 'usb-ci-v4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next

Peter writes:

USB Chipidea updates for v4.4-rc1

- Use extcon framework for VBUS and ID detect
- Add imx6sx and imx7d support
- Other small changes
2015-10-22 18:24:38 -07:00
Greg Kroah-Hartman
a4d8e93c31 usb: patches for v4.4 merge window
This pull request is large with a total of 136 non-merge
 commits. Because of its size, we will only describe the big things in
 broad terms.
 
 Many will be happy to know that dwc3 is now almost twice as fast after
 some profiling and speed improvements. Also in dwc3, John Youn from
 Synopsys added support for their new DWC USB3.1 IP Core and the HAPS
 platform which can be used to validate it.
 
 A series of patches from Robert Baldyga cleaned up uses of
 ep->driver_data as a flag for "claimed endpoint" in favor of the new
 ep->claimed flag.
 
 Sudip Mukherjee fixed a ton of really old problems on the amd5536udc
 driver. That should make a few people happy.
 
 Heikki Krogerus worked on converting dwc3 to the unified device property
 interface.
 
 Together with these, there's a ton of non-critical fixes, typos and
 stuff like that.
 
 Signed-off-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWJoq5AAoJEIaOsuA1yqREOlkQAJTndRGxhcZR5rLzjyRDDags
 pYoXJAqaneq5G8BwKY+2AQlPaUr87UEHUOo8pk4S31mdFHlp/d/6YIXLpdlYbEcW
 ixGhtxZnUhyvWM0HYGgyoDGQP9YJXy5/MR2lEJhmsqcH/Q0dih5VrDGyJ3BxEboZ
 2jXy7iou5fs5nHsR4fpdUH+ER//oKgHopRbbt+mmCwZbRJbuukA0KVDMHO8ix6cy
 tG/8zbnv5RY3O4a0lJAST8LNmtpxfF9yUCs83b6muhLgO9GXUGYb+I8DjPJMbwag
 klOy8Z1bG5e4ymh6383ZG7wDITf82N5cy5huoyunQHVjYg1L8vDHa9aF72e+yR/3
 blb9OYALbKPV072HMwOfH+M9cvcCVDGytbJQIgMot9mjpP6GPhgbGtxb+RWNy2j8
 Z2kEaxd3BUXvWiRbvyvn7uQuT/cAF4StrTnQrsbFSt0fKAUkQnGdK7XxYfGGql97
 p3u2x2D7YSkurywMWyXjuBsm/mXsImAfTJvoWndyOIHU2PNAzIDM4k9TWaYNNAKA
 ilZSuSC/JVnMPEH/J/QpytxMM5wbiGyJOyI4bc4MiAXgCkG3qm8vi0PMZM8x0rEu
 q778B+50alg9U7/G75dt0WQP+kqDjn+iUB7i/YUC9sq/Dhlmpp48KvJU+zaco+7I
 QsxGXmlgeA7yXX8ywy71
 =jPoY
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v4.4 merge window

This pull request is large with a total of 136 non-merge
commits. Because of its size, we will only describe the big things in
broad terms.

Many will be happy to know that dwc3 is now almost twice as fast after
some profiling and speed improvements. Also in dwc3, John Youn from
Synopsys added support for their new DWC USB3.1 IP Core and the HAPS
platform which can be used to validate it.

A series of patches from Robert Baldyga cleaned up uses of
ep->driver_data as a flag for "claimed endpoint" in favor of the new
ep->claimed flag.

Sudip Mukherjee fixed a ton of really old problems on the amd5536udc
driver. That should make a few people happy.

Heikki Krogerus worked on converting dwc3 to the unified device property
interface.

Together with these, there's a ton of non-critical fixes, typos and
stuff like that.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-22 17:19:33 -07:00
Pavel Fedin
952105ab52 KVM: arm/arm64: Fix vGIC documentation
Correct some old mistakes in the API documentation:

1. VCPU is identified by index (using kvm_get_vcpu() function), but
   "cpu id" can be mistaken for affinity ID.
2. Some error codes are wrong.

  [ Slightly tweaked some grammer and did some s/CPU index/vcpu_index/
    in the descriptions.  -Christoffer ]

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-10-22 23:01:47 +02:00