Commit graph

127,691 commits

Author SHA1 Message Date
James Hogan
25b08c7fb0 KVM: MIPS: Invalidate TLB by regenerating ASIDs
Invalidate host TLB mappings when the guest ASID is changed by
regenerating ASIDs, rather than flushing the entire host TLB except
entries in the guest KSeg0 range.

For the guest kernel mode ASID we regenerate on the spot when the guest
ASID is changed, as that will always take place while the guest is in
kernel mode.

However when the guest invalidates TLB entries the ASID will often by
changed temporarily as part of writing EntryHi without the guest
returning to user mode in between. We therefore regenerate the user mode
ASID lazily before entering the guest in user mode, if and only if the
guest ASID has actually changed since the last guest user mode entry.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
2016-09-29 12:40:12 +01:00
James Hogan
f3124cc551 KVM: MIPS: Split kernel/user ASID regeneration
The host ASIDs for guest kernel and user mode are regenerated together
if the ASID for guest kernel mode is out of date. That is fine as the
ASID for guest kernel mode is always generated first, however it doesn't
allow the ASIDs to be regenerated or invalidated individually instead of
linearly flushing the entire host TLB.

Therefore separate the regeneration code so that the ASIDs are checked
and regenerated separately.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
2016-09-29 12:40:12 +01:00
James Hogan
91e4f1b607 KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
When a guest TLB entry is replaced by TLBWI or TLBWR, we only invalidate
TLB entries on the local CPU. This doesn't work correctly on an SMP host
when the guest is migrated to a different physical CPU, as it could pick
up stale TLB mappings from the last time the vCPU ran on that physical
CPU.

Therefore invalidate both user and kernel host ASIDs on other CPUs,
which will cause new ASIDs to be generated when it next runs on those
CPUs.

We're careful only to do this if the TLB entry was already valid, and
only for the kernel ASID where the virtual address it mapped is outside
of the guest user address range.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10.x-
2016-09-29 12:39:30 +01:00
Nicolas Iooss
75ca5b2226 x86/entry: spell EBX register correctly in documentation
As EBS does not mean anything reasonable in the context it is used, it
seems like a misspelling for EBX.

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-09-29 10:09:58 +02:00
Anton Blanchard
5045ea3737 powerpc/vdso64: Use double word compare on pointers
__kernel_get_syscall_map() and __kernel_clock_getres() use cmpli to
check if the passed in pointer is non zero. cmpli maps to a 32 bit
compare on binutils, so we ignore the top 32 bits.

A simple test case can be created by passing in a bogus pointer with
the bottom 32 bits clear. Using a clk_id that is handled by the VDSO,
then one that is handled by the kernel shows the problem:

  printf("%d\n", clock_getres(CLOCK_REALTIME, (void *)0x100000000));
  printf("%d\n", clock_getres(CLOCK_BOOTTIME, (void *)0x100000000));

And we get:

  0
  -1

The bigger issue is if we pass a valid pointer with the bottom 32 bits
clear, in this case we will return success but won't write any data
to the pointer.

I stumbled across this issue because the LLVM integrated assembler
doesn't accept cmpli with 3 arguments. Fix this by converting them to
cmpldi.

Fixes: a7f290dad3 ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel")
Cc: stable@vger.kernel.org # v2.6.15+
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-29 15:17:57 +10:00
Balbir Singh
2e5bbb5461 KVM: PPC: Book3S HV: Migrate pinned pages out of CMA
When PCI Device pass-through is enabled via VFIO, KVM-PPC will
pin pages using get_user_pages_fast(). One of the downsides of
the pinning is that the page could be in CMA region. The CMA
region is used for other allocations like the hash page table.
Ideally we want the pinned pages to be from non CMA region.

This patch (currently only for KVM PPC with VFIO) forcefully
migrates the pages out (huge pages are omitted for the moment).
There are more efficient ways of doing this, but that might
be elaborate and might impact a larger audience beyond just
the kvm ppc implementation.

The magic is in new_iommu_non_cma_page() which allocates the
new page from a non CMA region.

I've tested the patches lightly at my end. The full solution
requires migration of THP pages in the CMA region. That work
will be done incrementally on top of this.

Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Merged via powerpc tree as that's where the changes are]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-29 15:14:44 +10:00
Gavin Shan
360aebd85a drivers/pci/hotplug: Support surprise hotplug in powernv driver
This supports PCI surprise hotplug. The design is highlighted as
below:

   * The PCI slot's surprise hotplug capability is exposed through
     device node property "ibm,slot-surprise-pluggable", meaning
     PCI surprise hotplug will be disabled if skiboot doesn't support
     it yet.
   * The interrupt because of presence or link state change is raised
     on surprise hotplug event. One event is allocated and queued to
     the PCI slot for workqueue to pick it up and process in serialized
     fashion. The code flow for surprise hotplug is same to that for
     managed hotplug except: the affected PEs are put into frozen state
     to avoid unexpected EEH error reporting in surprise hot remove path.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-29 15:02:28 +10:00
Gavin Shan
313483dd72 powerpc/powernv: Unfreeze PE on allocation
This unfreezes PE when it's initialized because the PE might be put
into frozen state in the last hot remove path. It's not harmful to
do so if the PE is already in unfrozen state.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-29 15:01:53 +10:00
Gavin Shan
e0056b0a12 powerpc/eeh: Export eeh_pe_state_mark()
This exports eeh_pe_state_mark(). It will be used to mark the surprise
hot removed PE as isolated to avoid unexpected EEH error reporting in
surprise remove path.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-29 14:51:04 +10:00
Gavin Shan
35066c0d79 powerpc/eeh: Export confirm_error_lock
This exports @confirm_error_lock so that eeh_serialize_{lock, unlock}()
can be used to freeze the affected PE in PCI surprise hot remove path.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-29 14:51:03 +10:00
Gavin Shan
de5a662249 powerpc/eeh: Allow to freeze PE in eeh_pe_set_option()
Function eeh_pe_set_option() is used to apply the requested options
(enable, disable, unfreeze) in EEH virtualization path. The semantics
of this function isn't complete until freezing is supported.

This allows to freeze the indicated PE. The new semantics is going to
be used in PCI surprise hot remove path, to freeze removed PCI devices
(PE) to avoid unexpected EEH error reporting.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-29 14:51:02 +10:00
Gavin Shan
fbce44d0ed powerpc/powernv: Call opal_pci_poll() if needed
When issuing PHB reset, OPAL API opal_pci_poll() is called to drive
the state machine in OPAL forward. However, we needn't always call
the function under some circumstances like reset deassert.

This avoids calling opal_pci_poll() when OPAL_SUCCESS is returned
from opal_pci_reset(). Except the overhead introduced by additional
one unnecessary OPAL call, I didn't run into real issue because of
this.

Reported-by: Pridhiviraj Paidipeddi <ppaiddipe@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-29 14:50:51 +10:00
David S. Miller
2a0100d7be sparc64: Fix non-SMP build.
Need to provide a dummy smp_fill_in_cpu_possible_map.

Fixes: 9b2f753ec2 ("sparc64: Fix cpu_possible_mask if nr_cpus is set")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 20:40:52 -04:00
Jisheng Zhang
9a0af838c2 ARM: dts: sony-nsz-gs7: add missing unit name to /memory node
This patch fixes the following DTC warning with W=1:

"Node /memory has a reg or ranges property, but no unit name"

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 21:36:37 +02:00
Jisheng Zhang
f415c5e3d0 ARM: dts: chromecast: add missing unit name to /memory node
This patch fixes the following DTC warning with W=1:

"Node /memory has a reg or ranges property, but no unit name"

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 21:31:26 +02:00
Jisheng Zhang
7d88dd60fe ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory node
This patch fixes the following DTC warning with W=1:

"Node /memory has a reg or ranges property, but no unit name"

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 21:31:21 +02:00
Jisheng Zhang
a6942e9faa ARM: dts: berlin2: Add missing unit name to /soc node
This patch fixes the following DTC warning with W=1:

"Node /soc has a reg or ranges property, but no unit name"

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 21:31:16 +02:00
Jisheng Zhang
2df5b04968 ARM: dts: berlin2cd: Add missing unit name to /soc node
This patch fixes the following DTC warning with W=1:

"Node /soc has a reg or ranges property, but no unit name"

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 21:31:11 +02:00
Jisheng Zhang
32473612f8 ARM: dts: berlin2q: Add missing unit name to /soc node
This patch fixes the following DTC warning with W=1:

"Node /soc has a reg or ranges property, but no unit name"

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 21:30:43 +02:00
Jisheng Zhang
2653c8cbdf ARM: dts: berlin2: Remove skeleton.dtsi inclusion
As noted in [1], "there are a number of problems with skeleton.dtsi,
and it would be prefereable to remove it entirely." This patch is to
remove skeleton.dtsi inclusion from berlin2.

[1] http://www.spinics.net/lists/arm-kernel/msg528080.html

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 21:30:38 +02:00
Jisheng Zhang
7283af5f6f ARM: dts: berlin2cd: Remove skeleton.dtsi inclusion
As noted in [1], "there are a number of problems with skeleton.dtsi,
and it would be prefereable to remove it entirely." This patch is to
remove skeleton.dtsi inclusion from berlin2cd.

[1] http://www.spinics.net/lists/arm-kernel/msg528080.html

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 21:30:33 +02:00
Jisheng Zhang
2702d6161f ARM: dts: berlin2q: Remove skeleton.dtsi inclusion
As noted in [1], "there are a number of problems with skeleton.dtsi,
and it would be prefereable to remove it entirely." This patch is to
remove skeleton.dtsi inclusion from berlin2q.

[1] http://www.spinics.net/lists/arm-kernel/msg528080.html

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 21:30:27 +02:00
Jisheng Zhang
139787f426 arm64: dts: berlin4ct: Add L2 cache topology
This patch adds the L2 cache topology for berlin4ct which has 1MB L2
cache.

[Sebastian: rename cache node from "l2-cache" to "cache"]

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 20:37:06 +02:00
Jisheng Zhang
7091eb9699 arm64: dts: berlin4ct: enable all wdt nodes unconditionally
After commit f29a72c24a ("watchdog: dw_wdt: Convert to use watchdog
infrastructure"), the dw_wdt driver can support multiple variants, so
unconditionally enable all dw_wdt nodes now.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 20:36:59 +02:00
Jisheng Zhang
7e38b27056 arm64: dts: berlin4ct: switch to Cortex-A53 specific pmu nodes
Commit ac82d12772 ("arm64: perf: add Cortex-A53 support") adds the
cortex A53 PMU support, thus instead of using the generic armv8-pmuv3
compatibility use the more specific Cortex A53 compatibility.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 20:36:51 +02:00
Jisheng Zhang
b009cb358e arm: dts: berlin2q: enable all wdt nodes unconditionally
After commit f29a72c24a ("watchdog: dw_wdt: Convert to use watchdog
infrastructure"), the dw_wdt driver can support multiple variants, so
unconditionally enable all dw_wdt nodes now.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 20:34:55 +02:00
Jisheng Zhang
684da56f7c arm: dts: berlin2: enable all wdt nodes unconditionally
After commit f29a72c24a ("watchdog: dw_wdt: Convert to use watchdog
infrastructure"), the dw_wdt driver can support multiple variants, so
unconditionally enable all dw_wdt nodes now.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2016-09-28 20:34:45 +02:00
Linus Walleij
ac2a8bca03 Merge branch 'ib-move-htc-egpio' into devel 2016-09-28 09:30:21 -07:00
Linus Walleij
3c6e8d05d6 mfd/gpio: Move HTC GPIO driver to GPIO subsystem
The HTC GPIO driver is a pure GPIO driver and I just can not
see what it is doing inside MFD. Let's just move it to GPIO
and take this opportunity to move the platform data to
<linux/platform_data/gpio-htc-egpio.h>

Cc: arm@kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-28 09:28:34 -07:00
Aleksey Makarov
888125a712 ARM64: ACPI: enable ACPI_SPCR_TABLE
SBBR mentions SPCR as a mandatory ACPI table.  So enable it for ARM64

Earlycon should be set up as early as possible.  ACPI boot tables are
mapped in arch/arm64/kernel/acpi.c:acpi_boot_table_init() that
is called from setup_arch() and that's where we parse SPCR.
So it has to be opted-in per-arch.

When ACPI_SPCR_TABLE is defined initialization of DT earlycon is
deferred until the DT/ACPI decision is done.  Initialize DT earlycon
if ACPI is disabled.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28 17:46:57 +02:00
Atish Patra
ebb99a4c12 sparc64: Fix irq stack bootmem allocation.
Currently, irq stack bootmem is allocated for all possible cpus
before nr_cpus value changes the list of possible cpus. As a result,
there is unnecessary wastage of bootmemory.

Move the irq stack bootmem allocation so that it happens after
possible cpu list is modified based on nr_cpus value.

Signed-off-by: Atish Patra <atish.patra@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 08:24:03 -07:00
Atish Patra
9b2f753ec2 sparc64: Fix cpu_possible_mask if nr_cpus is set
If kernel boot parameter nr_cpus is set, it should define the number
of CPUs that can ever be available in the system i.e.
cpu_possible_mask. setup_nr_cpu_ids() overrides the nr_cpu_ids based
on the cpu_possible_mask during kernel initialization. If
cpu_possible_mask is not set based on the nr_cpus value, earlier part
of the kernel would be initialized using nr_cpus value leading to a
kernel crash.

Set cpu_possible_mask based on nr_cpus value. Thus setup_nr_cpu_ids()
becomes redundant and does not corrupt nr_cpu_ids value.

Signed-off-by: Atish Patra <atish.patra@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 08:24:02 -07:00
Mike Kravetz
1e953d846a sparc64 mm: Fix more TSB sizing issues
Commit af1b1a9b36 ("sparc64 mm: Fix base TSB sizing when hugetlb
pages are used") addressed the difference between hugetlb and THP
pages when computing TSB sizes.  The following additional issues
were also discovered while working with the code.

In order to save memory, THP makes use of a huge zero page.  This huge
zero page does not count against a task's RSS, but it does consume TSB
entries.  This is similar to hugetlb pages.  Therefore, count huge
zero page entries in hugetlb_pte_count.

Accounting of THP pages is done in the routine set_pmd_at().
Unfortunately, this does not catch the case where a THP page is split.
To handle this case, decrement the count in pmdp_invalidate().
pmdp_invalidate is only called when splitting a THP.  However, 'sanity
checks' are added in case it is ever called for other purposes.

A more general issue exists with HPAGE_SIZE accounting.
hugetlb_pte_count tracks the number of HPAGE_SIZE (8M) pages.  This
value is used to size the TSB for HPAGE_SIZE pages.  However,
each HPAGE_SIZE page consists of two REAL_HPAGE_SIZE (4M) pages.
The TSB contains an entry for each REAL_HPAGE_SIZE page.  Therefore,
the number of REAL_HPAGE_SIZE pages should be used to size the huge
page TSB.  A new compile time constant REAL_HPAGE_PER_HPAGE is used
to multiply hugetlb_pte_count before sizing the TSB.

Changes from V1
- Fixed build issue if hugetlb or THP not configured

Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 08:24:02 -07:00
Paul Gortmaker
bdf2f59e64 sparc64: fix section mismatch in find_numa_latencies_for_group
To fix:

  WARNING: vmlinux.o(.text.unlikely+0x580): Section mismatch in
  reference from the function find_numa_latencies_for_group() to the
  function .init.text:find_mlgroup()

  The function find_numa_latencies_for_group() references the
  function __init find_mlgroup().  This is often because
  find_numa_latencies_for_group lacks a __init annotation or the
  annotation of find_mlgroup is wrong.

It turns out find_numa_latencies_for_group is only called from:
    static int __init numa_parse_mdesc(void)
and hence we can tag find_numa_latencies_for_group with __init.

In doing so we see that find_best_numa_node_for_mlgroup is only
called from within __init and hence can also be marked with __init.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Nitin Gupta <nitin.m.gupta@oracle.com>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: sparclinux@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28 08:24:02 -07:00
Mark Rutland
db68f3e759 arm64: tlbflush.h: add __tlbi() macro
As with dsb() and isb(), add a __tlbi() helper so that we can avoid
distracting asm boilerplate every time we want a TLBI. As some TLBI
operations take an argument while others do not, some pre-processor is
used to handle these two cases with different assembly blocks.

The existing tlbflush.h code is moved over to use the helper.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
[ rename helper to __tlbi, update comment and commit log ]
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-28 10:44:05 +01:00
Kefeng Wang
b4b9551e2f arm64: Kconfig: remove SMP dependence for NUMA
The arm64 forces CONFIG_SMP=y with commit 4b3dc9679c, no need to
add SMP dependence for NUMA.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-28 10:43:38 +01:00
Oliver O'Halloran
c762c69e10 powerpc/boot: Add support for XZ compression
This patch adds an option to use XZ compression for the kernel image.

Currently this is only enabled for 64-bit Book3S targets, which is
roughly equivalent to the platforms that use the kernel's zImage
wrapper, and that have been tested.

The bulk of the 32-bit platforms and 64-bit BookE use uboot images,
which relies on uboot implementing XZ. In future we can enable XZ
support for those targets once someone has tested it.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-28 14:35:14 +10:00
Oliver O'Halloran
f1e510bbb9 powerpc/boot: Add XZ support to the wrapper script
This modifies the wrapper script so that the -Z option takes an argument
to specify the compression type. It can either be 'gz', 'xz' or 'none'.

The legazy --no-gzip and -z options are still supported and will set the
compression to none and gzip respectively, but they are not documented.

Only XZ -6 is used for compression rather than XZ -9. Using compression
levels higher than 6 requires the decompressor to build a large (64MB)
dictionary when decompressing and some environments cannot satisfy such
large allocations (e.g. POWER 6 LPAR partition firmware).

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-28 14:32:27 +10:00
Oliver O'Halloran
a4da56fbc5 powerpc/boot: Remove the legacy gzip wrapper
This code is no longer used and can be removed.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-28 14:31:50 +10:00
Oliver O'Halloran
1b7898ee27 powerpc/boot: Use the pre-boot decompression API
Currently the powerpc boot wrapper has its own wrapper around zlib to
handle decompressing gzipped kernels. The kernel decompressor library
functions now provide a generic interface that can be used in the
pre-boot environment. This allows boot wrappers to easily support
different compression algorithms. This patch converts the wrapper to use
this new API, but does not add support for using new algorithms.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-28 14:31:43 +10:00
Oliver O'Halloran
22750d98b0 powerpc/boot: Use CONFIG_KERNEL_GZIP
Most architectures allow the compression algorithm used to produced the
vmlinuz image to be selected as a kernel config option. In preperation
for supporting algorithms other than gzip in the powerpc boot wrapper
the makefile needs to be modified to use these config options.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-28 14:25:55 +10:00
Oliver O'Halloran
1a13de6df9 powerpc/boot: Add sed script
The powerpc boot wrapper is potentially compiled with a separate
toolchain and/or toolchain flags than the rest of the kernel. The usual
case is a 64-bit big endian kernel builds a 32-bit big endian wrapper.

The main problem with this is that the wrapper does not have access to
the kernel headers (without a lot of gross hacks). To get around this
the required headers are copied into the build directory via several sed
scripts which rewrite problematic includes. This patch moves these
fixups out of the makefile into a separate .sed script file to clean up
makefile slightly.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Reword first paragraph of change log a little]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-28 14:20:44 +10:00
Dave Airlie
ca09fb9f60 Linux 4.8-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJX6H4uAAoJEHm+PkMAQRiG5sMH/3yzrMiUCSokdS+cvY+jgKAG
 JS58JmRvBPz2mRaU3MRPBGRDeCz/Nc9LggL2ZcgM+E1ZYirlYyQfIED3lkqk5R07
 kIN1wmb+kQhXyU4IY3fEX7joqyKC6zOy4DUChPkBQU0/0+VUmdVmcJvsuPlnMZtf
 g95m0BdYTui+eDezASRqOEp3Lb5ONL4c3ao4yBP0LHF033ctj3VJQiyi5uERPZJ0
 5e6Mo7Wxn78t9WqJLQAiEH46kTwT2plNlxf3XXqTenfIdbWhqE873HPGeSMa3VQV
 VywXTpCpSPQsA8BYg66qIbebdKOhs9MOviHVfqDtwQlvwhjlBDya0gNHfI5fSy4=
 =Y/L5
 -----END PGP SIGNATURE-----

Merge tag 'v4.8-rc8' into drm-next

Linux 4.8-rc8

There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge
it now to avoid troubles.

* tag 'v4.8-rc8': (1442 commits)
  Linux 4.8-rc8
  fault_in_multipages_readable() throws set-but-unused error
  mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
  radix tree: fix sibling entry handling in radix_tree_descend()
  radix tree test suite: Test radix_tree_replace_slot() for multiorder entries
  fix memory leaks in tracing_buffers_splice_read()
  tracing: Move mutex to protect against resetting of seq data
  MIPS: Fix delay slot emulation count in debugfs
  MIPS: SMP: Fix possibility of deadlock when bringing CPUs online
  mm: delete unnecessary and unsafe init_tlb_ubc()
  huge tmpfs: fix Committed_AS leak
  shmem: fix tmpfs to handle the huge= option properly
  blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
  MIPS: Fix pre-r6 emulation FPU initialisation
  arm64: kgdb: handle read-only text / modules
  arm64: Call numa_store_cpu_info() earlier.
  locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text
  nvme-rdma: only clear queue flags after successful connect
  i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
  perf/core: Limit matching exclusive events to one PMU
  ...
2016-09-28 12:08:49 +10:00
Al Viro
45caf47007 x86: separate extable.h, switch sections.h to it
drivers/platform/x86/dell-smo8800.c is touched due to the following obscenity:
drivers/platform/x86/dell-smo8800.c ->
	linux/interrupt.h ->
		linux/hardirq.h ->
			asm/hardirq.h ->
				linux/irq.h ->
					asm/hw_irq.h ->
						asm/sections.h ->
							asm/uaccess.h
is the only chain of includes pulling asm/uaccess.h there.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:15:23 -04:00
Al Viro
b79d8d82bb remove stray include of asm/uaccess.h from cacheflush.h
It was introduced in "arch, x86: pmem api for ensuring durability
of persistent memory updates" in July 2015, along with the code
that really used that stuff.  Three weeks later all that code
got moved to asm/pmem.h by "pmem, x86: move x86 PMEM API to new
pmem.h header"; include, however, was left behind.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:15:22 -04:00
Al Viro
a31b821d8c mn10300: remove a bogus processor.h->uaccess.h include
The only reason it used to be needed had been a (bogus) use of
set_fs() in start_thread() and that got removed in 2011...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:15:22 -04:00
Al Viro
76580237d1 xtensa: split uaccess.h into C and asm sides
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:15:21 -04:00
Al Viro
93b5097fe5 kill __kernel_ds_p off
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:15:20 -04:00
Al Viro
81029b1f77 mn10300: finish verify_area() off
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:15:20 -04:00
Al Viro
08435d89dd frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
it has no business in uaccess.h, everything else has it in pgtable.h and
the only user (mm/mmap.c) unconditionally pulls asm/pgtable.h via linux/mm.h.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:15:19 -04:00