Remove ldb panel entry for the following reasons:
- The b850v3 has an onboard LVDS to DisplayPort converter (STDP4028). So
we should not limit the monitors that can be connected by hardcoding the
auo,b133htn01 1080p panel.
- The default resolution on the LVDS interface needs to be WXGA or less.
Otherwise when a 1080p monitor is connected to the HDMI port there is no
output on both the LVDS and HDMI ports since a single IPU on i.MX6 can
not handle two 1080p displays. With the panel entry removed from the
devicetree, drm driver defaults the resolution on LVDS interface to XGA.
Once in userspace, applications can set the desired resolution on LVDS
interface over IPU2 CRTC.
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull ARM cpuidle changes for v4.7 from Daniel Lezcano.
* 'cpuidle/4.7' of http://git.linaro.org/people/daniel.lezcano/linux:
drivers: firmware: psci: use const and __initconst for psci_cpuidle_ops
soc: qcom: spm: Use const and __initconst for qcom_cpuidle_ops
ARM: cpuidle: constify return value of arm_cpuidle_get_ops()
ARM: cpuidle: add const qualifier to cpuidle_ops member in structures
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can
cause drivers to be deferred forever if such clocks are referenced in
their devices' clocks properties.
Update the disabled external scif clock node so that it
is not disabled to prevent this.
Reported-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: fix for v4.6 extracted from a larger patch targeted at v4.7]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
to the clk-ti branch from the Linux clk tree for the ADPLL clock driver.
Otherwise things won't keep booting properly when we flip over to use
the clock driver instead of fixed clocks set up by the bootloader.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2Lew
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.6/dt-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Enable dm814x and dra62x clock driver. This branch has a dependency
to the clk-ti branch from the Linux clk tree for the ADPLL clock driver.
Otherwise things won't keep booting properly when we flip over to use
the clock driver instead of fixed clocks set up by the bootloader.
* tag 'omap-for-v4.6/dt-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Add clocks for dm814x ADPLL
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Put nodes after of_address_to_resource() in case the nodes might be
released while parsing in them.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop support for Cortex A8 in timer code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6ZAq
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Merge "Renesas ARM Based SoC Updates for v4.7" from Simon Horman:
Drop support for Cortex A8 in timer code
* tag 'renesas-soc-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: timer: Drop support for Cortex A8
ARM: shmobile: timer: Fix preset_lpj leading to too short delays
Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins"
ARM: dts: r8a7791: Don't disable referenced optional clocks
preparatory patches to support a USB PHY
driver for USB on DA850 SoC. This should
eventually lead to USB working again on
this device.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=BpdJ
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.7/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
Merge "DaVinci SoC updates for v4.7" from Sekhar Nori:
These are preparatory patches to support a USB PHY driver for USB on DA850
SoC. This should eventually lead to USB working again on this device.
* tag 'davinci-for-v4.7/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: clk: add set_parent callback for mux clocks
ARM: davinci: da8xx: move usb code to new file
ARM: davinci: use IRQCHIP_DECLARE for cp_intc
ARM: davinci: remove unused DA8XX_NUM_UARTS
ARM: davinci: simplify call to of populate
ARM: DaVinci USB: removed deprecated properties from MUSB config
removal of some unused macros and data-
-structures and use of helper macros to
reduce code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=uaz5
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.7/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/cleanup
Merge "DaVinci cleanups for v4.7" from Sekhar Nori:
It includes removal of some unused macros and data- -structures and use
of helper macros to reduce code.
* tag 'davinci-for-v4.7/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: use IRQCHIP_DECLARE for cp_intc
ARM: davinci: remove unused DA8XX_NUM_UARTS
ARM: davinci: simplify call to of populate
ARM: DaVinci USB: removed deprecated properties from MUSB config
- Justin adds a soc_dev driver to properly report to user-space the Broadcom
STB SoC family, product and revision
- Florian reworks how the brcmstb_gisb driver dependency is done to enable it
on Broadcom STB MIPS-based SoCs and remove a select in
arch/arm/mach-bcm/Kconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OJuu
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.7/drivers' of http://github.com/Broadcom/stblinux into next/drivers
Merge "Broadcom ARM-based SoCs drivers changes" from Florian Fainelli:
- Justin adds a soc_dev driver to properly report to user-space the Broadcom
STB SoC family, product and revision
- Florian reworks how the brcmstb_gisb driver dependency is done to enable it
on Broadcom STB MIPS-based SoCs and remove a select in
arch/arm/mach-bcm/Kconfig
* tag 'arm-soc/for-4.7/drivers' of http://github.com/Broadcom/stblinux:
bus: brcmstb_gisb: Rework dependencies
soc: brcmstb: add SoC driver to brcmstb
This contains a bunch of preparatory patches to the PMC driver which are
a prerequisite to moving the driver to generic power domains.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=EmlG
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.7-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
Merge "soc/tegra: Changes for v4.7-rc1" from Thierry Reding:
This contains a bunch of preparatory patches to the PMC driver which are
a prerequisite to moving the driver to generic power domains.
* tag 'tegra-for-4.7-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Update NVIDIA PMC for Tegra
soc/tegra: pmc: Wait for powergate state to change
soc/tegra: pmc: Ensure GPU partition can be toggled on/off by PMC
soc/tegra: pmc: Remove additional check for a valid partition
soc/tegra: pmc: Fix verification of valid partitions
soc/tegra: pmc: Fix testing of powergate state
soc/tegra: pmc: Change powergate and rail IDs to be an unsigned type
soc/tegra: pmc: Protect public functions from potential race conditions
soc/tegra: pmc: Restore base address on probe failure
soc/tegra: pmc: Remove non-existing L2 partition for Tegra124
soc/tegra: pmc: Remove non-existing power partitions for Tegra210
soc/tegra: pmc: Remove debugfs entry on probe failure
soc/tegra: pmc: Fix sparse warning for tegra_pmc_init_tsense_reset()
soc/tegra: pmc: Add missing structure members to kernel-doc
for Versatile flash handling and instead moving it over
to the device tree and a special add-on file.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9Fgt
-----END PGP SIGNATURE-----
Merge tag 'versatile-flash-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/drivers
Merge "move Versatile flash protection to the device tree" from Linus Walleij:
This is a set of patches removing the board file code
for Versatile flash handling and instead moving it over
to the device tree and a special add-on file.
* tag 'versatile-flash-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: move flash registration to device tree
ARM: versatile: move flash registration to the device tree
mtd: augment the "arm,versatile-flash" bindings
mtd: physmap_of: add a hook for Versatile write protection
Acked-by: Brian Norris <computersforpeace@gmail.com>
1. Support for external expansion bus useful for additional hardware
e.g. LogicTile Express daughterboards (Brian Starkey)
2. Fix for device node name unit-address presence/absence warnings
enabled in recently update DTC (Sudeep Holla)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CN/A
-----END PGP SIGNATURE-----
Merge tag 'vexpress-for-v4.7/updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
Merge "ARMv7 Vexpress updates/fixes for v4.7" from Sudeep Holla:
1. Support for external expansion bus useful for additional hardware
e.g. LogicTile Express daughterboards (Brian Starkey)
2. Fix for device node name unit-address presence/absence warnings
enabled in recently update DTC (Sudeep Holla)
* tag 'vexpress-for-v4.7/updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: dts: vexpress: Add external expansion bus to DT
ARM: dts: vexpress: fix node name unit-address presence warnings
* Configure NMI key as wakeup source in DT of kzm9g board
* Add SDHI support to DT of gose board
* Add support of UHS-I SDR-50 for SDHI to DT of r8a7790 SoC
* Correct interrupt type for ARM TWD in DT of r8a7779 and sh73a0 SoCs
* Add IIC support to DT of r8a7794 SoC
* Add CAN support to DT of r8a7793 and r8a7794 SoCs
* Add SCIF2 support to r8a7790 device tree
* Use CAN, JPU and USB3.0 fallback compatibility string
in DT of r8a7791 and r8a7790 SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vStA
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Merge "Renesas ARM Based SoC DT Updates for v4.7" from Simon Horman:
* Configure NMI key as wakeup source in DT of kzm9g board
* Add SDHI support to DT of gose board
* Add support of UHS-I SDR-50 for SDHI to DT of r8a7790 SoC
* Correct interrupt type for ARM TWD in DT of r8a7779 and sh73a0 SoCs
* Add IIC support to DT of r8a7794 SoC
* Add CAN support to DT of r8a7793 and r8a7794 SoCs
* Add SCIF2 support to r8a7790 device tree
* Use CAN, JPU and USB3.0 fallback compatibility string
in DT of r8a7791 and r8a7790 SoCs
* tag 'renesas-dt-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits)
ARM: dts: gose: Enable SDHI controllers
ARM: dts: r8a7793: Add SDHI controllers
ARM: dts: r8a7790: fix max-frequency for SDHI
ARM: dts: kzm9g: Configure NMI key as wake-up source
ARM: dts: r8a7790: lager: Enable UHS-I SDR-50
ARM: dts: r8a7790: Set maximum frequencies for SDHI clocks
ARM: dts: r8a7791: Use USB3.0 fallback compatibility string
ARM: dts: r8a7790: Use USB3.0 fallback compatibility string
ARM: dts: r8a7779: Correct interrupt type for ARM TWD
ARM: dts: sh73a0: Correct interrupt type for ARM TWD
ARM: dts: r8a7794: Add IIC nodes
ARM: dts: r8a7794: add IIC clocks
ARM: dts: r8a7793: add CAN nodes to device tree
ARM: dts: r8a7793: add CAN clocks to device tree
ARM: dts: r8a7794: add CAN nodes to device tree
ARM: dts: r8a7794: add CAN clocks to device tree
ARM: dts: r8a7790: use fallback can compatibility string
ARM: dts: r8a7791: use fallback can compatibility string
ARM: dts: r8a7790: Add SCIF2 device node
ARM: dts: r8a7790: Add SCIF2 clock
...
The alpha pci_mmap_resource() is used for both IORESOURCE_MEM and
IORESOURCE_IO resources, but iomem_is_exclusive() is only applicable for
IORESOURCE_MEM.
Call iomem_is_exclusive() only for IORESOURCE_MEM resources, and do it
earlier to match the generic version of pci_mmap_resource().
Fixes: 10a0ef39fb ("PCI/alpha: pci sysfs resources")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Include the development base board, which is equipped with some
devices such as EEPROM.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Anup enables a bunch of standard peripherals in the Northstar 2 DTS: PL330
DMA, GIC maintenance interrupt, PL022 SPI controller
- Anup also re-orgnanizes the clock Device Tree fragments into a separate file
for consistency with how other Broadcom SoCs are doing this
- Luke switches the SMP enable-method and reboot from a spin-table + syscon to
the standard PSCI 1.0 firmware interface
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6mn8
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.7/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64
Pull "Broadcom ARM64-based SoC Device Tree changes" from Florian Fainelli:
- Anup enables a bunch of standard peripherals in the Northstar 2 DTS: PL330
DMA, GIC maintenance interrupt, PL022 SPI controller
- Anup also re-orgnanizes the clock Device Tree fragments into a separate file
for consistency with how other Broadcom SoCs are doing this
- Luke switches the SMP enable-method and reboot from a spin-table + syscon to
the standard PSCI 1.0 firmware interface
* tag 'arm-soc/for-4.7/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: NS2 secondary core enablement via PSCI
arm64: dts: Add ARM PL022 SPI DT nodes for NS2
arm64: dts: Move NS2 clock DT nodes to separate DT file
arm64: dts: Add maintenance interrupt for GIC in NS2 DT
arm64: dts: Add ARM PL330 DMA DT node for NS2
This patch set only includes a single change to
fix the compatible string for SATA controllers on
X-Gene v2 SOC platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Wnq5
-----END PGP SIGNATURE-----
Merge tag 'xgene-dts-for-v4.7-part1' of https://github.com/AppliedMicro/xgene-next into next/dt64
Merge "First part of X-Gene DTS changes queued for v4.7" from Duc Dang:
This patch set only includes a single change to
fix the compatible string for SATA controllers on
X-Gene v2 SOC platforms.
* tag 'xgene-dts-for-v4.7-part1' of https://github.com/AppliedMicro/xgene-next:
arm64: dts: apm: Fix compatible string for X-Gene 2 SATA controller DTS node
- Reserve memory regions for Hi6220
- Add sp804 timer node for Hi6220
- Add cpu and cluster level's low power state for Hi6220
- Add gpio configuration nodes for Hi6220
- Add pinctrl configuration nodes for Hi6220
- Add spi related nodes for Hi6220
- Add i2c nodes for Hi6220
- Add i2c nodes to work with mezzanine boards
- Add usb nodes for Hi6220
- Add mailobx node for Hi6220
- Add SRAM node and stub clock node for Hi6220
- Add pinctrl nodes for uarts and enable them
- Add LED nodes for hi6220-hikey board
- Add hi655x pmic node for Hi6220
- Add dwmmc nodes for Hi6220
- Add wifi nodes support for Hi6220-Hikey board
- Register thermal sensor for Hi6220
- Register Hi6220's thermal zone for power allocator
- Add L2 cache topology for Hi6220
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MpZ0
-----END PGP SIGNATURE-----
Merge tag 'hi6220-dt-for-4.7' of git://github.com/hisilicon/linux-hisi into next/dt64
Pull "ARM64: DT: Hisilicon Hi6220 soc and hikey board updates for 4.7" from Wei Xu
- Reserve memory regions for Hi6220
- Add sp804 timer node for Hi6220
- Add cpu and cluster level's low power state for Hi6220
- Add gpio configuration nodes for Hi6220
- Add pinctrl configuration nodes for Hi6220
- Add spi related nodes for Hi6220
- Add i2c nodes for Hi6220
- Add i2c nodes to work with mezzanine boards
- Add usb nodes for Hi6220
- Add mailobx node for Hi6220
- Add SRAM node and stub clock node for Hi6220
- Add pinctrl nodes for uarts and enable them
- Add LED nodes for hi6220-hikey board
- Add hi655x pmic node for Hi6220
- Add dwmmc nodes for Hi6220
- Add wifi nodes support for Hi6220-Hikey board
- Register thermal sensor for Hi6220
- Register Hi6220's thermal zone for power allocator
- Add L2 cache topology for Hi6220
* tag 'hi6220-dt-for-4.7' of git://github.com/hisilicon/linux-hisi:
arm64: dts: Add L2 cache topology to Hi6220
arm64: dts: register Hi6220's thermal zone for power allocator
arm64: dts: register Hi6220's thermal sensor
arm64: dts: add wifi nodes support for hi6220-hikey
arm64: dts: add dwmmc nodes for hi6220
arm64: dts: hikey: Add hi655x pmic dts node
arm64: dts: add LED nodes for hi6220-hikey
arm64: dts: hi6220: add pinctrl for uarts and enable them
arm64: dts: add Hi6220's stub clock node
arm64: dts: add mailbox node for Hi6220
arm64: dts: Add hi6220 usb node
arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards
arm64: dts: add all hi6220 i2c nodes
arm64: dts: add Hi6220 spi configuration nodes
arm64: dts: add Hi6220 pinctrl configuration nodes
arm64: dts: Add Hi6220 gpio configuration nodes
arm64: dts: enable idle states for Hi6220
arm64: dts: add sp804 timer node for Hi6220
arm64: dts: Reserve memory regions for hi6220
Just one update: Support for external expansion bus useful for
additional hardware e.g.LogicTile Express daughterboards (Brian Starkey)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ypy7
-----END PGP SIGNATURE-----
Merge tag 'juno-for-v4.7/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
Pull "ARMv8 Juno DT updates for v4.7" from Sudeep Holla:
Just one update: Support for external expansion bus useful for
additional hardware e.g.LogicTile Express daughterboards (Brian Starkey)
* tag 'juno-for-v4.7/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Add external expansion bus to DT
A couple of cleanups and fixes to various device trees, enable power and
volume keys on Jetson TX1, use stdout-path to define the serial port (so
it doesn't have to be specified on the kernel command-line) and add
Google Pixel C (a.k.a. Smaug) support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=2hlL
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.7-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
Merge "arm64: tegra: Changes for v4.7-rc1" from Thierry Reding
A couple of cleanups and fixes to various device trees, enable power and
volume keys on Jetson TX1, use stdout-path to define the serial port (so
it doesn't have to be specified on the kernel command-line) and add
Google Pixel C (a.k.a. Smaug) support.
* tag 'tegra-for-4.7-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable cros-ec and charger on Smaug
arm64: tegra: Add pinmux for Smaug board
arm64: tegra: Add stdout-path for various boards
arm64: tegra: Remove unused #power-domain-cells property
arm64: tegra: Add gpio-keys nodes for Smaug
arm64: tegra: Enable power and volume keys on Jetson TX1
arm64: tegra: Add support for Google Pixel C
arm64: tegra: Replace legacy *,wakeup property with wakeup-source
arm64: tegra: Fix copy/paste typo in several DTS includes
arm64: tegra: Remove 0, prefix from unit-addresses
1. Add PL330 DMA controller and Thermal Management Unit to Exynos 7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lzL+
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Merge "Samsung Device Tree ARM64 updates and improvements for v4.7" from Krzysztof Kozlowski:
1. Add PL330 DMA controller and Thermal Management Unit to Exynos 7.
* tag 'samsung-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: Add nodes for pdma0 and pdma1 for exynos7
arm64: dts: exynos: Add TMU node for exynos7
- Eric enables more BCM2835 peripherals in multi_v7_defconfig: watchdog, I2S,
switches from the sdhci-bcm2835 to the sdhci-iproc driver, DWC2 USB controller
- Eric also enables more BCM2835 peripherals in bcm2835_defconfig: VC4, NFS root
Power Management support, switching sdhci-bcm2835 for sdhci-iproc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QxkI
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.7/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
Merge "This pull request contains defconfig changes for Broadcom ARM-based SoCs"
from Florian Fainelli:
- Eric enables more BCM2835 peripherals in multi_v7_defconfig: watchdog, I2S,
switches from the sdhci-bcm2835 to the sdhci-iproc driver, DWC2 USB controller
- Eric also enables more BCM2835 peripherals in bcm2835_defconfig: VC4, NFS root
Power Management support, switching sdhci-bcm2835 for sdhci-iproc
* tag 'arm-soc/for-4.7/defconfig' of http://github.com/Broadcom/stblinux:
ARM: bcm2835: Enable NFS root support.
ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
ARM: bcm2835: Enable CONFIG_PM.
ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC
ARM: multi_v7_defconfig: Build in DWC2 USB support
ARM: multi_v7_defconfig: Switch BCM2835 to sdhci-iproc.c for MMC
ARM: multi_v7_defconfig: Add more BCM2835 support
- Use the new cryto engine(mv_cesa) in the mvebu and multi-arm
defcongig files
- Attach mvebu_*_defconfig to the mvebu maintainers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlcPzQsACgkQCwYYjhRyO9UpUwCghNZsWe0jSWCZyVbmLS4qCGT/
X3oAn1wc1CeLHFDroMVcCw3aBaTLofUP
=LxX6
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.7-1' of git://git.infradead.org/linux-mvebu into next/defconfig
Merge "mvebu defconfig for 4.7 (part 1)" from Gregory CLEMENT
- Use the new cryto engine(mv_cesa) in the mvebu and multi-arm
defcongig files
- Attach mvebu_*_defconfig to the mvebu maintainers
* tag 'mvebu-defconfig-4.7-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu_v5_defconfig: Switching to the new Marvell's cryptographic engine driver
ARM: multi_v7_defconfig: Enabling the new Marvell's cryptographic engine driver
MAINTAINERS: attach arch/arm/configs/mvebu_*_defconfig to relevant maintainers
ARM: mvebu_v7_defconfig: Enabling the new Marvell's cryptographic engine driver
This NAND controller device is used on UniPhier SoCs (and I know
it is also used on SoC FPGA).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
to the clk-ti branch from the Linux clk tree for the ADPLL clock driver.
Otherwise things won't keep booting properly when we flip over to use
the clock driver instead of fixed clocks set up by the bootloader.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2Lew
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.6/dt-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Enable dm814x and dra62x clock driver. This branch has a dependency
to the clk-ti branch from the Linux clk tree for the ADPLL clock driver.
Otherwise things won't keep booting properly when we flip over to use
the clock driver instead of fixed clocks set up by the bootloader.
* tag 'omap-for-v4.6/dt-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Add clocks for dm814x ADPLL
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
device now, reuse that and remove similar code from platform code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
device now, reuse that and remove similar code from platform code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
device now, reuse that and remove similar code from platform code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch add rockchip's compatible string to the compat list and
remove similar code from platform code for supporting generic platdev
driver.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
device now, reuse that and remove similar code from platform code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
device now, reuse that and remove similar code from platform code.
Note that the complete routine imx27_dt_init() is removed as
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
has same effect as a NULL .init_machine machine callback pointer.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
device now, reuse that and remove similar code from platform code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
maxcpu=n sets the number of CPUs activated at boot time to a max of n,
but allowing the remaining CPUs to be brought up later if the user
decides to do so. However, on arm64 due to various reasons, we disallowed
hotplugging CPUs beyond n, by marking them not present. Now that
we have checks in place to make sure the hotplugged CPUs have compatible
features with system and requires no new errata, relax the restriction.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
CPU Errata work arounds are detected and applied to the
kernel code at boot time and the data is then freed up.
If a new hotplugged CPU requires a work around which
was not applied at boot time, there is nothing we can
do but simply fail the booting.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the capabilities are only available once all the CPUs
have booted, we're unable to check for a particular feature
in any subsystem that gets initialized before then.
In order to support this, introduce a local_cpu_has_cap() function
that tests for the presence of a given capability independently
of the whole framework.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[ Added preemptible() check ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[will: remove duplicate initialisation of caps in this_cpu_has_cap]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add scope parameter to the arm64_cpu_capabilities::matches(), so that
this can be reused for checking the capability on a given CPU vs the
system wide. The system uses the default scope associated with the
capability for initialising the CPU_HWCAPs and ELF_HWCAPs.
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The CHAIN event allows two 32-bit counters to be treated as a single
64-bit counter, under certain allocation restrictions on the PMU.
Whilst userspace could theoretically create CHAIN events using the raw
event syntax, we don't really want to advertise this in sysfs, since
it's useless in isolation. This patch removes the event from our /sys
entries.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Fix off by one error in da850 device tree in
the number of INTC interrupts.
Signed-off-by: David Lechner <david@lechnology.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[nsekhar@ti.com: commit message update]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Disable mdio and eth0 in da850.dtsi file. All other
devices are disabled by default and not all boards
will use these devices, so these should be disabled too.
da850-evm.dtb already had status = "okay" for these devices.
da850-enbw-cmc.dts did not, so they were added.
Signed-off-by: David Lechner <david@lechnology.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[nsekhar@ti.com: commit description updates]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Add AUXDATA needed to match the device-tree node for spi0 to the
non-device-tree clock.
Signed-off-by: David Lechner <david@lechnology.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[nsekhar@ti.com: commit description updates]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Broadcom Vulcan uses ARMv8 PMUv3 and supports most of
the ARMv8 recommended implementation defined events.
Added Vulcan events mapping for perf and perf_cache map.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The complete common architectural and micro-architectural
event number structure is filtered based on PMCEIDn_EL0 and
exposed to /sys using is_visibile function pointer in events
attribute_group.
To filter the events in is_visible function, pmceid based bitmap
is stored in arm_pmu structure and the id field from
perf_pmu_events_attr is used to check against the bitmap.
The function which derives event bitmap from PMCEIDn_EL0 is
executed in the cpus, which has the pmu being initialized,
for heterogeneous pmu support.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
changed pmu register access to make use of <read/write>_sys_reg
from sysreg.h instead of accessing them directly.
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Defined all the ARMv8 recommended implementation defined events
from J3 - "ARM recommendations for IMPLEMENTATION DEFINED event numbers"
in ARM DDI 0487A.g.
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>