Commit graph

127,691 commits

Author SHA1 Message Date
Toshi Kani
ad025a73f0 x86/mtrr: Fix PAT init handling when MTRR is disabled
get_mtrr_state() calls pat_init() on BSP even if MTRR is disabled.
This results in calling pat_init() on BSP only since APs do not call
pat_init() when MTRR is disabled.  This inconsistency between BSP
and APs leads to undefined behavior.

Make BSP's calling condition to pat_init() consistent with AP's,
mtrr_ap_init() and mtrr_aps_init().

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-6-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-29 12:23:26 +02:00
Toshi Kani
edfe63ec97 x86/mtrr: Fix Xorg crashes in Qemu sessions
A Xorg failure on qemu32 was reported as a regression [1] caused by
commit 9cd25aac1f ("x86/mm/pat: Emulate PAT when it is disabled").

This patch fixes the Xorg crash.

Negative effects of this regression were the following two failures [2]
in Xorg on QEMU with QEMU CPU model "qemu32" (-cpu qemu32), which were
triggered by the fact that its virtual CPU does not support MTRRs.

 #1. copy_process() failed in the check in reserve_pfn_range()

    copy_process
     copy_mm
      dup_mm
       dup_mmap
        copy_page_range
         track_pfn_copy
          reserve_pfn_range

 A WC map request was tracked as WC in memtype, which set a PTE as
 UC (pgprot) per __cachemode2pte_tbl[].  This led to this error in
 reserve_pfn_range() called from track_pfn_copy(), which obtained
 a pgprot from a PTE.  It converts pgprot to page_cache_mode, which
 does not necessarily result in the original page_cache_mode since
 __cachemode2pte_tbl[] redirects multiple types to UC.

 #2. error path in copy_process() then hit WARN_ON_ONCE in
     untrack_pfn().

     x86/PAT: Xorg:509 map pfn expected mapping type uncached-
     minus for [mem 0xfd000000-0xfdffffff], got write-combining
      Call Trace:
     dump_stack
     warn_slowpath_common
     ? untrack_pfn
     ? untrack_pfn
     warn_slowpath_null
     untrack_pfn
     ? __kunmap_atomic
     unmap_single_vma
     ? pagevec_move_tail_fn
     unmap_vmas
     exit_mmap
     mmput
     copy_process.part.47
     _do_fork
     SyS_clone
     do_syscall_32_irqs_on
     entry_INT80_32

These negative effects are caused by two separate bugs, but they
can be addressed in separate patches.  Fixing the pat_init() issue
described below addresses the root cause, and avoids Xorg to hit
these cases.

When the CPU does not support MTRRs, MTRR does not call pat_init(),
which leaves PAT enabled without initializing PAT.  This pat_init()
issue is a long-standing issue, but manifested as issue #1 (and then
hit issue #2) with the above-mentioned commit because the memtype
now tracks cache attribute with 'page_cache_mode'.

This pat_init() issue existed before the commit, but we used pgprot
in memtype.  Hence, we did not have issue #1 before.  But WC request
resulted in WT in effect because WC pgrot is actually WT when PAT
is not initialized.  This is not how it was designed to work.  When
PAT is set to disable properly, WC is converted to UC.  The use of
WT can result in a system crash if the target range does not support
WT.  Fortunately, nobody ran into such issue before.

To fix this pat_init() issue, PAT code has been enhanced to provide
pat_disable() interface.  Call this interface when MTRRs are disabled.
By setting PAT to disable properly, PAT bypasses the memtype check,
and avoids issue #1.

  [1]: https://lkml.org/lkml/2016/3/3/828
  [2]: https://lkml.org/lkml/2016/3/4/775

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-5-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-29 12:23:26 +02:00
Toshi Kani
d63dcf49cf x86/mm/pat: Replace cpu_has_pat with boot_cpu_has()
Borislav Petkov suggested:

 > Please use on init paths boot_cpu_has(X86_FEATURE_PAT) and on fast
 > paths static_cpu_has(X86_FEATURE_PAT). No more of that cpu_has_XXX
 > ugliness.

Replace the use of cpu_has_pat on init paths with boot_cpu_has().

Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-4-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-29 12:23:26 +02:00
Toshi Kani
224bb1e5d6 x86/mm/pat: Add pat_disable() interface
In preparation for fixing a regression caused by:

  9cd25aac1f ("x86/mm/pat: Emulate PAT when it is disabled")

... PAT needs to provide an interface that prevents the OS from
initializing the PAT MSR.

PAT MSR initialization must be done on all CPUs using the specific
sequence of operations defined in the Intel SDM.  This requires MTRRs
to be enabled since pat_init() is called as part of MTRR init
from mtrr_rendezvous_handler().

Make pat_disable() as the interface that prevents the OS from
initializing the PAT MSR.  MTRR will call this interface when it
cannot provide the SDM-defined sequence to initialize PAT.

This also assures that pat_disable() called from pat_bsp_init()
will set the PAT table properly when CPU does not support PAT.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-3-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-29 12:23:25 +02:00
Toshi Kani
02f037d641 x86/mm/pat: Add support of non-default PAT MSR setting
In preparation for fixing a regression caused by:

  9cd25aac1f ("x86/mm/pat: Emulate PAT when it is disabled")'

... PAT needs to support a case that PAT MSR is initialized with a
non-default value.

When pat_init() is called and PAT is disabled, it initializes the
PAT table with the BIOS default value. Xen, however, sets PAT MSR
with a non-default value to enable WC. This causes inconsistency
between the PAT table and PAT MSR when PAT is set to disable on Xen.

Change pat_init() to handle the PAT disable cases properly.  Add
init_cache_modes() to handle two cases when PAT is set to disable.

 1. CPU supports PAT: Set PAT table to be consistent with PAT MSR.
 2. CPU does not support PAT: Set PAT table to be consistent with
    PWT and PCD bits in a PTE.

Note, __init_cache_modes(), renamed from pat_init_cache_modes(),
will be changed to a static function in a later patch.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-2-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-29 12:23:25 +02:00
Huang Rui
34a4cceb78 x86/cpu: Add advanced power management bits
Bit 11 of CPUID 8000_0007 edx is processor feedback interface.
Bit 12 of CPUID 8000_0007 edx is accumulated power.

Print proper names in proc/cpuinfo

Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Cc: Tony Li <tony.li@amd.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Sherry Hurwitz <sherry.hurwitz@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: "Len Brown" <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1458871720-3209-1-git-send-email-ray.huang@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-29 11:12:11 +02:00
Borislav Petkov
5f870a3f71 x86/thread_info: Merge two !__ASSEMBLY__ sections
We have

  #ifndef __ASSEMBLY__
  ...
  #endif

  #ifndef __ASSEMBLY__
  ...
  #endif

Merge the two.

No functionality change.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1459189217-25532-1-git-send-email-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-29 11:12:10 +02:00
Vladimir Zapolskiy
4a6772f514 x86/cpufreq: Remove duplicated TDP MSR macro definitions
The list of CPU model specific registers contains two copies of TDP
registers, remove the one, which is out of numerical order in the
list.

Fixes: 6a35fc2d6c ("cpufreq: intel_pstate: get P1 from TAR when available")
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Kristen Carlson
 Accardi <kristen@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: http://lkml.kernel.org/r/1459018020-24577-1-git-send-email-vladimir_zapolskiy@mentor.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-29 11:12:10 +02:00
Harald Freudenberger
74b2375e67 s390/crypto: provide correct file mode at device register.
When the prng device driver calls misc_register() there is the possibility
to also provide the recommented file permissions. This fix now gives
useful values (0644) where previously just the default was used (resulting
in 0600 for the device file).

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-29 10:55:12 +02:00
Borislav Petkov
8196dab4fc x86/cpu: Get rid of compute_unit_id
It is cpu_core_id anyway.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1458917557-8757-3-git-send-email-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-29 10:45:04 +02:00
Peter Zijlstra
32b62f4468 perf/x86/amd: Cleanup Fam10h NB event constraints
Avoid allocating the AMD NB event constraints data structure when not
needed. This gets rid of x86_max_cores usage and avoids allocating
this on AMD Core Perfctr supporting hardware (which has separate MSRs
for NB events).

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: aherrmann@suse.com
Cc: Rui Huang <ray.huang@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: jencce.kernel@gmail.com
Link: http://lkml.kernel.org/r/20160320124629.GY6375@twins.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-29 10:45:04 +02:00
Peter Zijlstra
ee6825c80e x86/topology: Fix AMD core count
It turns out AMD gets x86_max_cores wrong when there are compute
units.

The issue is that Linux assumes:

	nr_logical_cpus = nr_cores * nr_siblings

But AMD reports its CU unit as 2 cores, but then sets num_smp_siblings
to 2 as well.

Boris: fixup ras/mce_amd_inj.c too, to compute the Node Base Core
properly, according to the new nomenclature.

Fixes: 1f12e32f4c ("x86/topology: Create logical package id")
Reported-by: Xiong Zhou <jencce.kernel@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andreas Herrmann <aherrmann@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Link: http://lkml.kernel.org/r/20160317095220.GO6344@twins.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-29 10:45:04 +02:00
Thor Thayer
ff6fd1478c ARM: socfpga: Enable Arria10 L2 cache ECC on startup
Enable ECC for Arria10 L2 cache on machine startup. The ECC has to be
enabled before data is stored in memory otherwise the ECC will fail on
reads.

Use DT_MACHINE to select Arria10 L2 cache function.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: devicetree@vger.kernel.org
Cc: dinguyen@opensource.altera.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@arm.linux.org.uk
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1458576106-24505-9-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2016-03-29 10:42:34 +02:00
Linus Walleij
0bfe5167b2 ARM: dts: ux500: use the GIC include header
Use the <dt-bindings/interrupt-controller/arm-gic.h> header for
generating the flags for the first cell of the interrupt
definitions.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-29 09:34:08 +02:00
Linus Walleij
1b1e8e024b ARM: dts: ux500: use the GPIO DT header
Use the <dt-bindings/gpio/gpio.h> header instead of using
hardcoded values for the GPIO flags. Eradicate the totally
bogus "0x4" flag used and set that to GPIO_ACTIVE_HIGH as is
proper, switch the inverted card detect on the Snowball to
flag using GPIO_ACTIVE_LOW instead of using the MMC-specific
inversion flag.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-29 09:34:08 +02:00
Marek Szyprowski
f1be903dbe ARM: dts: exynos: Enable the HDMI CEC device on Exynos4412 Odroid boards
Add a dts node entry and enable the HDMI CEC device present in the Exynos4
family of SoCs.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[k.kozlowski: Put the node in alphabetical order]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-29 15:22:51 +09:00
Kamil Debski
c795c88d98 ARM: dts: exynos: Add node for the HDMI CEC device to exynos4
This patch adds HDMI CEC node specific to the Exynos4210/4x12 SoC series.

Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-29 15:18:19 +09:00
Kamil Debski
a92de67c10 ARM: dts: exynos: Add HDMI CEC pin definition to exynos4 pinctrl
Add pinctrl nodes for the HDMI CEC device to the Exynos4210 and
Exynos4x12 SoCs. These are required by the HDMI CEC device.

Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-29 15:17:07 +09:00
Alim Akhtar
fbfcf4bf1c arm64: dts: exynos: Add TMU node for exynos7
This patch adds TMU node, related temprature sensor and triping
point data for Atlas cpu core found on exynos7 SoC.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-29 10:41:24 +09:00
Krzysztof Kozlowski
fb2d1b847f ARM: dts: exynos: Enable SSS on Odroid X/X2/U3 family
Enable the Security SubSystem (SSS) on Exynos4412-based Odroid boards
to provide hardware acceleration for AES operations.

Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
2016-03-29 10:37:56 +09:00
Krzysztof Kozlowski
f3a132f0ea ARM: dts: exynos: Enable SSS on Trats2
Enable the Security SubSystem (SSS) on Trats2 (Exynos4412) board to
provide hardware acceleration for AES operations.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-03-29 10:36:48 +09:00
Krzysztof Kozlowski
6c5eb1db1e ARM: dts: exynos: Add Security SubSystem node to Exynos4
Add Security SubSystem (SSS) node to Exynos4 which provides hardware
acceleration of AES operations.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-03-29 10:36:29 +09:00
Simon Guo
71528d8bd7 powerpc: Correct used_vsr comment
The used_vsr flag is set if process has used VSX registers, not Altivec
registers. But the comment says otherwise, correct the comment.

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-29 12:08:08 +11:00
Oliver O'Halloran
01d7c2a2de powerpc/process: Fix altivec SPR not being saved
In save_sprs() in process.c contains the following test:

	if (cpu_has_feature(cpu_has_feature(CPU_FTR_ALTIVEC)))
		t->vrsave = mfspr(SPRN_VRSAVE);

CPU feature with the mask 0x1 is CPU_FTR_COHERENT_ICACHE so the test
is equivilent to:

	if (cpu_has_feature(CPU_FTR_ALTIVEC) &&
		cpu_has_feature(CPU_FTR_COHERENT_ICACHE))

On CPUs without support for both (i.e G5) this results in vrsave not
being saved between context switches. The vector register save/restore
code doesn't use VRSAVE to determine which registers to save/restore,
but the value of VRSAVE is used to determine if altivec is being used
in several code paths.

Fixes: 152d523e63 ("powerpc: Create context switch helpers save_sprs() and restore_sprs()")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-29 12:08:08 +11:00
Sebastian Siewior
08a5bb2921 powerpc/mm: Fixup preempt underflow with huge pages
hugepd_free() used __get_cpu_var() once. Nothing ensured that the code
accessing the variable did not migrate from one CPU to another and soon
this was noticed by Tiejun Chen in 94b09d7554 ("powerpc/hugetlb:
Replace __get_cpu_var with get_cpu_var"). So we had it fixed.

Christoph Lameter was doing his __get_cpu_var() replaces and forgot
PowerPC. Then he noticed this and sent his fixed up batch again which
got applied as 69111bac42 ("powerpc: Replace __get_cpu_var uses").

The careful reader will noticed one little detail: get_cpu_var() got
replaced with this_cpu_ptr(). So now we have a put_cpu_var() which does
a preempt_enable() and nothing that does preempt_disable() so we
underflow the preempt counter.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-29 12:08:07 +11:00
Dan Williams
fc0c202813 x86, pmem: use memcpy_mcsafe() for memcpy_from_pmem()
Update the definition of memcpy_from_pmem() to return 0 or a negative
error code.  Implement x86/arch_memcpy_from_pmem() with memcpy_mcsafe().

Cc: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-03-28 17:19:31 -07:00
Linus Torvalds
d4dc3b2442 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
 "Minor typing cleanup from Joe Perches, and some comment typo fixes
  from Adam Buchbinder"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Convert naked unsigned uses to unsigned int
  sparc: Fix misspellings in comments.
2016-03-28 15:14:11 -05:00
Linus Torvalds
ec3c07377b Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile bugfixes from Chris Metcalf:
 "These include updates to MAINTAINERS, some comment spelling fixes, and
  a bugfix to the tile kgdb.c support"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: Fix misspellings in comments.
  MAINTAINERS: update web link for tile architecture
  MAINTAINERS: update arch/tile maintainer email domain
  tile kgdb: fix bug in copy to gdb regs, and optimize memset
2016-03-28 15:04:55 -05:00
Wolfram Sang
352486b164 ARM: shmobile: defconfig: enable I2C demultiplexer and slave eeprom
The Lager board shall be the reference platform for the runtime I2C IP
core switcher and for I2C slave support. Enable the needed drivers for
this.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-28 10:05:01 +09:00
Wolfram Sang
651435d682 ARM: multi_v7_defconfig: enable I2C demultiplexer and slave eeprom
The Renesas Lager board shall be a reference platform for the runtime
I2C IP core switcher and for I2C slave support. Enable the needed
drivers for this.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-03-28 08:59:13 +09:00
Simon Horman
000025cfbb ARM: dts: sh73a0: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

The clock-output-names property is left in place for the zb_clk which is
thus treated as a special case as the MSTP clock driver (clk-mstp.c)
explicitly looks for a clock with node name zb_clk for the r8a73a4 and
sh73a0 SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:56:11 +09:00
Simon Horman
57c75d1ed6 ARM: dts: r8a73a4: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

The clock-output-names property is left in place for the zb_clk which is
thus treated as a special case as the MSTP clock driver (clk-mstp.c)
explicitly looks for a clock with node name zb_clk for the r8a73a4 and
sh73a0 SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:56:10 +09:00
Simon Horman
a5bad2c7c9 ARM: dts: lager: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:56:08 +09:00
Simon Horman
203f0ef865 ARM: dts: porter: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:56:07 +09:00
Simon Horman
62c7e9da59 ARM: dts: koelsch: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:56:05 +09:00
Simon Horman
45e4f51311 ARM: dts: gose: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:56:04 +09:00
Simon Horman
337f6bef6d ARM: dts: r8a7794: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:56:02 +09:00
Simon Horman
3b81c0ce13 ARM: dts: r8a7793: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:56:01 +09:00
Simon Horman
f617604fe5 ARM: dts: r8a7791: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:56:00 +09:00
Simon Horman
3f6dba702c ARM: dts: r8a7779: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:55:58 +09:00
Simon Horman
452fc89994 ARM: dts: r8a7778: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:55:57 +09:00
Simon Horman
2dca789803 ARM: dts: r8a7740: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:55:55 +09:00
Simon Horman
21f1897059 ARM: dts: r7s72100: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.  Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:55:54 +09:00
Simon Horman
b19dd47b27 ARM: dts: r8a7790: Remove unnecessary clock-output-names properties
* Fixed rate and fixed factor clocks do not require an
  clock-output-names property.
* Since 07705583e9 ("clk: shmobile: div6: Make clock-output-names
  optional") Renesas div6 clocks do not require a clock-output-names
  property.

In the above cases there is only one clock output and its name is taken
from that of the clock node.

Accordingly, remove the unnecessary clock-output-names properties and
as necessary the nodes.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:55:53 +09:00
Simon Horman
20ccdd90ab ARM: dts: kzm9d: use generic pinctrl properties
Since 16ccaf5bb5 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the kzm9d device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:55:51 +09:00
Simon Horman
ffff86d16e ARM: dts: kzm9g: use generic pinctrl properties
Since 16ccaf5bb5 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the kzm9g device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:55:50 +09:00
Simon Horman
4386ed21e5 ARM: dts: silk: use generic pinctrl properties
Since 16ccaf5bb5 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the silk device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:55:48 +09:00
Simon Horman
be7359dd98 ARM: dts: alt: use generic pinctrl properties
Since 16ccaf5bb5 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the alt device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:55:47 +09:00
Simon Horman
2e207c1cd0 ARM: dts: gose: use generic pinctrl properties
Since 16ccaf5bb5 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the gose device tree to use the generic

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:55:45 +09:00
Simon Horman
b2abb296ad ARM: dts: porter: use generic pinctrl properties
Since 16ccaf5bb5 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.

This patch updates the porter device tree to use the generic properties.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-03-28 08:55:44 +09:00