The LSE atomics implementation uses runtime patching to patch in calls
to out of line non-LSE atomics implementations on cores that lack hardware
support for LSE. To avoid paying the overhead cost of a function call even
if no call ends up being made, the bl instruction is kept invisible to the
compiler, and the out of line implementations preserve all registers, not
just the ones that they are required to preserve as per the AAPCS64.
However, commit fd045f6cd9 ("arm64: add support for module PLTs") added
support for routing branch instructions via veneers if the branch target
offset exceeds the range of the ordinary relative branch instructions.
Since this deals with jump and call instructions that are exposed to ELF
relocations, the PLT code uses x16 to hold the address of the branch target
when it performs an indirect branch-to-register, something which is
explicitly allowed by the AAPCS64 (and ordinary compiler generated code
does not expect register x16 or x17 to retain their values across a bl
instruction).
Since the lse runtime patched bl instructions don't adhere to the AAPCS64,
they don't deal with this clobbering of registers x16 and x17. So add them
to the clobber list of the asm() statements that perform the call
instructions, and drop x16 and x17 from the list of registers that are
callee saved in the out of line non-LSE implementations.
In addition, since we have given these functions two scratch registers,
they no longer need to stack/unstack temp registers.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: factored clobber list into #define, updated Makefile comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add compatible id, GPMC register resource and interrupt
resource to NAND controller nodes.
The GPMC node will provide an interrupt controller for the
NAND IRQs.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The NAND Ready/Busy# line is connected to GPMC_WAIT0 pin and
can't be used for wait state insertion for NAND I/O read/write.
So disable read/write wait monitoring as per Reference Manual's
suggestion [1].
[1] dm816x TRM: SPRUGX8C: 9.2.4.12.2 NAND Device-Ready Pin
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add compatible id, GPMC register resource and interrupt
resource to NAND controller nodes.
The GPMC node will provide an interrupt controller for the
NAND IRQs.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The NAND Ready/Busy# line is connected to GPMC_WAIT0 pin and
can't be used for wait state insertion for NAND I/O read/write.
So disable read/write wait monitoring as per Reference Manual's
suggestion [1].
[1] AM335x TRM: SPRUH73L: 7.1.3.3.12.2 NAND Device-Ready Pin
Cc: Teresa Remmet <t.remmet@phytec.de>
Cc: Ilya Ledvich <ilya@compulab.co.il>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Rostislav Lisovy <lisovy@gmail.com>
Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add compatible id, GPMC register resource and interrupt
resource to NAND controller nodes.
The GPMC node will provide an interrupt controller for the
NAND IRQs.
Cc: Teresa Remmet <t.remmet@phytec.de>
Cc: Ilya Ledvich <ilya@compulab.co.il>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Rostislav Lisovy <lisovy@gmail.com>
Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The NAND Ready/Busy# line is connected to GPMC_WAIT0 pin and
can't be used for wait state insertion for NAND I/O read/write.
So disable read/write wait monitoring as per Reference Manual's
suggestion [1].
[1] AM437x TRM: SPRUHL7D: 9.1.3.3.12.2 NAND Device-Ready Pin
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add compatible id, GPMC register resource and interrupt
resource to NAND controller nodes.
The GPMC node will provide an interrupt controller for the
NAND IRQs.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
wait pin monitoring is not used for nand so it is pointless to
have the gpmc,wait-monitoring-ns property.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Use VA_START macro in asm/memory.h instead of private LOWEST_ADDR
definition in dump.c.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add compatible id, GPMC register resource and interrupt
resource to NAND controller nodes.
The GPMC node will provide an interrupt controller for the
NAND IRQs.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
UAO is a feature of ARMv8.2, so add a submenu like we have for 8.1.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit dd006da216 ("arm64: mm: increase VA range of identity map") made
some changes to the memory mapping code to allow physical memory to reside
at an offset that exceeds the size of the virtual mapping.
However, since the size of the vmemmap area is proportional to the size of
the VA area, but it is populated relative to the physical space, we may
end up with the struct page array being mapped outside of the vmemmap
region. For instance, on my Seattle A0 box, I can see the following output
in the dmesg log.
vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
0xffffffbfc0000000 - 0xffffffbfd0000000 ( 256 MB actual)
We can fix this by deciding that the vmemmap region is not a projection of
the physical space, but of the virtual space above PAGE_OFFSET, i.e., the
linear region. This way, we are guaranteed that the vmemmap region is of
sufficient size, and we can even reduce the size by half.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The atlas7 clock controller driver registers a reset controller
for itself, which causes a link error when the subsystem is
disabled:
drivers/built-in.o: In function `atlas7_clk_init':
drivers/clk/sirf/clk-atlas7.c:1681: undefined reference to `reset_controller_register'
As the clk driver does not have a Kconfig symbol for itself
but it always built-in when the platform is enabled, we have
to ensure that the reset controller subsystem is also built-in
in this case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Fixes: 301c5d2940 ("clk: sirf: add CSR atlas7 clk and reset support")
The cpu_die and cpu_kill callbacks are only used when CONFIG_HOTPLUG_CPU
is enabled, otherwise we get a warning about them:
arch/arm/mach-socfpga/platsmp.c:102:13: error: 'socfpga_cpu_die' defined but not used [-Werror=unused-function]
arch/arm/mach-socfpga/platsmp.c:115:12: error: 'socfpga_cpu_kill' defined but not used [-Werror=unused-function]
This adds the appropriate #ifdef.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
The code was executing a return with a pointer before reaching
iounmap().
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Clang complains about the __initdata section attribute being in the
wrong place in two files of ks8695:
arch/arm/mach-ks8695/cpu.c:37:31: error: '__section__' attribute only applies to functions and global variables
arch/arm/mach-ks8695/board-og.c:83:31: error: '__section__' attribute only applies to functions and global variables
This moves the attribute to the correct place.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
When secondary cpus are booted through the ACPI parking protocol, the
booted cpu should check that FW has correctly cleared its mailbox entry
point value to make sure the boot process was correctly executed.
The entry point check is carried in the cpu_ops->cpu_postboot method, that
is executed by secondary cpus when entering the kernel with irqs disabled.
The ACPI parking protocol cpu_ops maps/unmaps the mailboxes on the
primary CPU to trigger secondary boot in the cpu_ops->cpu_boot method
and on secondary processors to carry out FW checks on the booted CPU
to verify the boot protocol was successfully executed in the
cpu_ops->cpu_postboot method.
Therefore, the cpu_ops->cpu_postboot method is forced to ioremap/unmap the
mailboxes, which is wrong in that ioremap cannot be safely be carried out
with irqs disabled.
To fix this issue, this patch reshuffles the code so that the mailboxes
are still mapped after the boot processor executes the cpu_ops->cpu_boot
method for a given cpu, and the VA at which a mailbox is mapped for a given
cpu is stashed in the per-cpu data struct so that secondary cpus can
retrieve them in the cpu_ops->cpu_postboot and complete the required
FW checks.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reported-by: Itaru Kitayama <itaru.kitayama@riken.jp>
Tested-by: Loc Ho <lho@apm.com>
Tested-by: Itaru Kitayama <itaru.kitayama@riken.jp>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Loc Ho <lho@apm.com>
Cc: Itaru Kitayama <itaru.kitayama@riken.jp>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Al Stone <ahs3@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ARMv8.2 extensions [1] include an optional feature, which supports
half precision(16bit) floating point/asimd data processing
instructions. This patch adds support for detecting and exposing
the same to the userspace via HWCAPs
[1] https://community.arm.com/groups/processors/blog/2016/01/05/armv8-a-architecture-evolution
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The asm-generic fixmap.h depends on each architecture's fixmap.h to pull
in the definition of PAGE_KERNEL_RO, if this exists. In the absence of
this, FIXMAP_PAGE_RO will not be defined. In mm/early_ioremap.c the
definition of early_memremap_ro is predicated on FIXMAP_PAGE_RO being
defined.
Currently, the arm64 fixmap.h doesn't include pgtable.h for the
definition of PAGE_KERNEL_RO, and as a knock-on effect early_memremap_ro
is not always defined, leading to link-time failures when it is used.
This has been observed with defconfig on next-20160226.
Unfortunately, as pgtable.h includes fixmap.h, adding the include
introduces a circular dependency, which is just as fragile.
Instead, this patch factors out PAGE_KERNEL_RO and other prot
definitions into a new pgtable-prot header which can be included by poth
pgtable.h and fixmap.h, avoiding the circular dependency, and ensuring
that early_memremap_ro is alwyas defined where it is used.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On ThunderX T88 pass 1.x through 2.1 parts, broadcast TLBI
instructions may cause the icache to become corrupted if it contains
data for a non-current ASID.
This patch implements the workaround (which invalidates the local
icache when switching the mm) by using code patching.
Signed-off-by: Andrew Pinski <apinski@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the .rodata section is actually still executable when DEBUG_RODATA
is enabled. This changes that so the .rodata is actually read only, no execute.
It also adds the .rodata section to the mem_init banner.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
[catalin.marinas@arm.com: added vm_struct vmlinux_rodata in map_kernel()]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
They are not symmetric with each other, neither are used in real world
(can not be found by grep command in source code root directory), so
remove them.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DT nodes representing the XOR engines were not placed at the
proper location to comply with the requirement of ordering DT nodes by
their unit address. This commit fixes this mistake.
[gregory.clement@free-electrons.com: Fix commit title by adding ' dts:']
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Following the review from the DT maintainers, the DT binding for the
clocks has changed, and we now use a DFX server node exposing a
syscon, with the clock nodes being subnodes of the DFX server
node. This commit therefore updates the AP806 Device Tree file to use
this new DT binding.
[gregory.clement@free-electrons.com: Fix commit title by adding ' dts:']
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit adds the base Device Tree files for the Armada 7K and 8K
SoCs, as well as the Armada 8040 DB board.
The Armada 7020, 7040 (7K family) and 8020, 8040 (8K family) are
composed of:
- An AP806 block that contains the CPU core and a few basic
peripherals. The AP806 is available in dual core configurations
(used in 7020 and 8020) and quad core configurations (used in 8020
and 8040).
- One or two CP110 blocks that contain all the high-speed interfaces
(SATA, PCIe, Ethernet, etc.). The 7K family chips have one CP110,
and the 8K family chips have two CP110, giving them twice the
number of HW interfaces.
In order to represent this from a Device Tree point of view, this
commit creates the following hierarchy:
* armada-ap806.dtsi - definitions common to dual/quad ap806
* armada-ap806-dual.dtsi - description of the two CPUs
* armada-7020.dtsi - description of the 7020 SoC
* armada-8020.dtsi - description of the 8020 SoC
* armada-ap806-quad.dtsi - description of the four CPUs
* armada-7040.dtsi - description of the 7040 SoC
* armada-7040-db.dts - description of the 7040 board
* armada-8040.dtsi - description of the 8040 SoC
The CP110 blocks are not described yet, and will be part of future
patch series.
[gregory.clement@free-electrons.com: Fix commit title by adding ' dts:']
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Remove the unnecessary boundary check since there is a huge
gap between user and kernel address that they would never overlap.
(arm64 does not have enough levels of page tables to cover 64-bit
virtual address)
See Documentation/arm64/memory.txt
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit 172b2386ed ("KVM: x86: fix missed hardware breakpoints",
2016-02-10) worked around a case where the debug registers are not loaded
correctly on preemption and on the first entry to KVM_RUN.
However, Xiao Guangrong pointed out that the root cause must be that
KVM_DEBUGREG_BP_ENABLED is not being set correctly. This can indeed
happen due to the lazy debug exit mechanism, which does not call
kvm_update_dr7. Fix it by replacing the existing loop (more or less
equivalent to kvm_update_dr0123) with calls to all the kvm_update_dr*
functions.
Cc: stable@vger.kernel.org # 4.1+
Fixes: 172b2386ed
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix per-vcpu vgic bitmap allocation
- Do not give copy random memory on MMIO read
- Fix GICv3 APR register restore order
KVM/x86 fixes:
- Fix ubsan warning
- Fix hardware breakpoints in a guest vs. preempt notifiers
- Fix Hurd
Generic:
- use __GFP_NOWARN together with GFP_NOWAIT
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJWzsReAAoJEL/70l94x66DT6cH/3K/X/eciQIQTjLWKQ9BUhsN
+4WN+PX51GCvRZgoGgXXxTUzWVpSHNE7iD5FR/yqiUpC6lq+GWYKyQYBU6S2tw7N
QrzVFUAOIAExfzw4ztLz8pvIIwsF6EC2sA0DRZO85FWApO4P3BJN/1nBa+THJchH
6RamguztCjVSfboFwpulPzmgzJwIQ1ai+KoO1z/1ifrxjOHLytF5wn6UegPXIkc6
PAWG0b6w2ZnSwTNhEdsjzlcEANd/otwOoTlcft//KLuBkSS0GgU3vgxv7OXeSn67
+Wa9wWT/rU6M4Ol0noXcyr/kiF5629bQ4IyLK7YFgOUPFt4Tmg+A1ABGc92WJa4=
=/9Sf
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"KVM/ARM fixes:
- Fix per-vcpu vgic bitmap allocation
- Do not give copy random memory on MMIO read
- Fix GICv3 APR register restore order
KVM/x86 fixes:
- Fix ubsan warning
- Fix hardware breakpoints in a guest vs. preempt notifiers
- Fix Hurd
Generic:
- use __GFP_NOWARN together with GFP_NOWAIT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: MMU: fix ubsan index-out-of-range warning
arm64: KVM: vgic-v3: Restore ICH_APR0Rn_EL2 before ICH_APR1Rn_EL2
KVM: async_pf: do not warn on page allocation failures
KVM: x86: fix conversion of addresses to linear in 32-bit protected mode
KVM: x86: fix missed hardware breakpoints
arm/arm64: KVM: Feed initialized memory to MMIO accesses
KVM: arm/arm64: vgic: Ensure bitmaps are long enough
Pull s390 bugfixes from Martin Schwidefsky:
"Two critical bug fixes for the signal handling"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/fpu: signals vs. floating point control register
s390/compat: correct restore of high gprs on signal return
This patch add the SO_CNX_ADVICE socket option (setsockopt only). The
purpose is to allow an application to give feedback to the kernel about
the quality of the network path for a connected socket. The value
argument indicates the type of quality report. For this initial patch
the only supported advice is a value of 1 which indicates "bad path,
please reroute"-- the action taken by the kernel is to call
dst_negative_advice which will attempt to choose a different ECMP route,
reset the TX hash for flow label and UDP source port in encapsulation,
etc.
This facility should be useful for connected UDP sockets where only the
application can provide any feedback about path quality. It could also
be useful for TCP applications that have additional knowledge about the
path outside of the normal TCP control loop.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates gpio-keys node that supports power-off for
X-Gene v2 Merlin board to adapt with new changes in xgene-gpio-sb
driver (to support configuring some GPIO pins as interrupt pins).
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
xgene-gpio-sb driver now supports configuring some GPIO pins
as interrupt pins. This patch adds the required fields for GPIO
standby controller DT node of X-Gene v2 platform to work with
this new driver change.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
This patch updates gpio-keys node that supports power-off for
X-Gene v1 Mustang board to adapt with new changes in xgene-gpio-sb
driver (to support configuring some GPIO pins as interrupt pins).
Signed-off-by: Duc Dang <dhdang@apm.com>
This patch enables Exynos thermal and related configs for the
TMU found on Exynos7 SoC. This also enables thermal emulation
mode to test trip points.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
We should set SW15 to pin 2-3 side on the board before we use CN9
as USB host or peripheral.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This board has a MAX3355 chip. However, we cannot use the extcon/max3355
driver because the ID pin doesn't connect to a gpio pin (in other words,
it connects to the SoC specific pin).
And, the phy-rcar-gen3-usb2 driver cannot handle such a chip for now.
So, this patch enables usb2_phy of channel 1 and 2.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>