Commit graph

127,691 commits

Author SHA1 Message Date
Max Filippov
81da313f2c xtensa: add default memmap option to iss_defconfig
Now that memory initialization doesn't add default memory region specify
it explicitly in the memmap command line option.

Save iss_defconfig as defconfig so that it doesn't have all option
settings in it, only those that are different from the Kconfig defaults.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-20 20:43:23 -07:00
Max Filippov
549409b4b5 xtensa: ISS: allow simdisk to use high memory buffers
ISS kernel by default has only low memory. But it may be configured to
support high memory and started in a simulator with more than 128M of
RAM. Simdisk driver in such configuration can get IO request with a
high memory page. There may be no TLB entry for that page, only page
table entry. However simulators don't do pagewalking, so such IO request
will fail. Touch IO buffer in the buffer read/write loop so that a TLB
entry is likely there when read or write simcall is invoked.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-20 20:43:22 -07:00
Max Filippov
feec273a2b xtensa: ISS: define simc_exit and use it instead of inline asm
A number of ISS platform functions use inline assembly to invoke
simulator exit, not all correctly. Define simc_exit(exit_code) and use
it instead of inline assembly.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-20 18:53:00 -07:00
Max Filippov
70feca7199 xtensa: xtfpga: group platform_* functions together
Group platform_* functions together and turn two separate #ifdef/#ifndef
blocks into single #ifdef/#else. No functional changes.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-20 18:52:59 -07:00
Max Filippov
205ad548a7 xtensa: rearrange CCOUNT calibration
DT-enabled kernel should have a CPU node connected to a clock. This clock
is the CCOUNT clock. Use old platform_calibrate_ccount call as a fallback
when CPU node cannot be found or has no clock and in non-DT-enabled
configurations.

Drop no longer needed code that updates CPU clock-frequency property in
the DT; drop DT-related code from the platform_calibrate_ccount too.

Move of_clk_init to the top of time_init, so that clocks are initialized
before CCOUNT calibration is attempted.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-20 18:52:59 -07:00
Max Filippov
58c3e3ac7a xtensa: xtfpga: use clock provider, don't update DT
Instead of querying hardcoded FPGA frequency register and then updating
clock-frequency property in specificly named DT nodes in machine setup
code register a clock provider that returns fixed-rate clock, configured
by register specified in DT. This way we have less magic/hardcoded names
and use more existing common clock framework code.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
2016-09-20 18:52:51 -07:00
Josh Poimboeuf
71f5443ebb x86/dumpstack: Fix show_stack() task pointer regression
With the following commit:

  e18bcccd1a ("x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder")

The task pointer argument to show_stack_log_lvl() in show_stack() was
inadvertently changed to 'current'.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: byungchul.park@lge.com
Cc: fweisbec@gmail.com
Cc: keescook@chromium.org
Cc: linux-tip-commits@vger.kernel.org
Cc: luto@amacapital.net
Cc: nilayvaish@gmail.com
Cc: rostedt@goodmis.org
Cc: tip-bot for Josh Poimboeuf <tipbot@zytor.com>
Fixes: e18bcccd1a ("x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder")
Link: http://lkml.kernel.org/r/20160920155340.yhewlx7vmgmov5fb@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-20 23:36:37 +02:00
Thomas Gleixner
464b5847e6 Merge branch 'irq/urgent' into irq/core
Merge urgent fixes so pending patches for 4.9 can be applied.
2016-09-20 23:20:32 +02:00
Ladislav Michl
ce385a5e7a ARM: dts: omap5-igep0050.dts: Use tabs for indentation
And here's another nitpick ;-)

Cc: Agustí Fontquerni i Gorchs <afontquerni@iseebcn.com>
Cc: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Pau Pajuel <ppajuel@gmail.com>
Fixes: b118c6a6ff ("ARM: dts: Add power button support for igepv5")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-09-20 11:37:50 -07:00
Tony Lindgren
d6c91b99ba ARM: dts: Fix igepv5 power button GPIO direction
It should be GPIO_ACTIVE_LOW instead of GPIO_ACTIVE_HIGH as
pointed out by Pau Pajuel <ppajuel@gmail.com>.

Cc: Agustí Fontquerni i Gorchs <afontquerni@iseebcn.com>
Cc: Enric Balletbo Serra <eballetbo@gmail.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Pau Pajuel <ppajuel@gmail.com>
Fixes: b118c6a6ff ("ARM: dts: Add power button support for igepv5")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-20 11:37:35 -07:00
John David Anglin
910a86435d parisc: Update comment regarding implementation of copy_user_page_asm
The attached patch describes the current implementation of
copy_user_page_asm().  It is possible to implement this routine using
either the kernel page mappings or equivalent aliases.  I tested both
and decided the former was more efficient.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2016-09-20 20:00:12 +02:00
Markus Elfring
c4351d980e parisc: Use kmalloc_array() in add_system_map_addresses()
* A multiplication for the size determination of a memory allocation
  indicated that an array data structure should be processed.
  Thus use the corresponding function "kmalloc_array".

  This issue was detected by using the Coccinelle software.

* Replace the specification of a data type by a pointer dereference
  to make the corresponding size determination a bit safer according to
  the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2016-09-20 18:02:56 +02:00
Helge Deller
5baf919dd7 parisc: Check return value of smp_boot_one_cpu()
Check return value of smp_boot_one_cpu() whether CPU could be brought up.

Reported-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2016-09-20 18:02:36 +02:00
Helge Deller
b5d5cf2b8a parisc: Drop BROKEN_RODATA config option
PARISC was the only architecture which selected the BROKEN_RODATA config
option. Drop it and remove the special handling from init.h as well.

Signed-off-by: Helge Deller <deller@gmx.de>
2016-09-20 18:02:35 +02:00
Ingo Molnar
2ab78a724b * Fix a boot crash reported by Mike Galbraith and Mike Krinkin. The
new EFI memory map reservation code didn't align reservations to
    EFI_PAGE_SIZE boundaries causing bogus regions to be inserted into
    the global EFI memory map - Matt Fleming
 -----BEGIN PGP SIGNATURE-----
 
 iQI2BAABCAAgBQJX4UshGRxtYXR0QGNvZGVibHVlcHJpbnQuY28udWsACgkQLzhZ
 wI0jPVX2RA/9HiT48K98R1fkiig/V3Wh8H8y7lQbwO+qA1WZ7q/D+DYau62qI3zM
 sLgTSoV2zzjBr+4JWuGIdbtpYBjhHci0HwEcOGp5EFSZmgJGOpc7VY2VdFaYyZ2X
 xhowGLXv2jgfKoAPt9MfgZX2Qh5Jt4CRlC+UcilUJp0wy1+uD4W7XmrLM1Rg7Ug2
 8XTL/BA5QxQa3wx8+/z6xV/ADlhzf3DQ7BwI3qkx5RHSXSuy1/E2XGTnyuDt/7Oo
 KmMwQGGrrv92uSjyq5vJ53DuNxXDJ7nGtlXTT2u0WtcZbzJXsXIaCZItbCA5rqW/
 wWGgsz5XSc406m1WNv8Zs8xx9NAEP/+KXQfftwuQHFqoylG4QqYuO060V5XOxQlh
 cdRuyVUgMONZAvTzEAUC+5SaN3c+WDCL8oEnrs/tdMxSzBL9Rj7yaHMW+ozVe5Nf
 GFxMnO0l5SG9+o8hSAkkn5RDfIDzSTC1W5imqWJQXhC2BXHEdmh4wVWIG4QgPM/K
 gqaTpX72Nu04lBjCXXpfKSK5Xqv67hZOzxUDkkjxtq1PtDbL1dPpzAF3s3GFdreI
 FfQgetg4jM4EPnWDQWqWVJxQUv+uCfpDV9g5y9kMinVb2OpyGjcZpNckGHKnqIXr
 hyntPYqyy793W6dPGEjTqfcVP751qisMjp6iIIqk3h+qr7HyJSF5nqs=
 =S9gJ
 -----END PGP SIGNATURE-----

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/core

Pull EFI fix from Matt Fleming:

 * Fix a boot crash reported by Mike Galbraith and Mike Krinkin. The
   new EFI memory map reservation code didn't align reservations to
   EFI_PAGE_SIZE boundaries causing bogus regions to be inserted into
   the global EFI memory map (Matt Fleming)

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-20 16:59:15 +02:00
Ingo Molnar
41a66072c3 Merge branch 'efi/urgent' into efi/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-20 16:58:59 +02:00
Ingo Molnar
7597cdc066 * Fix a boot hang on large memory machines (multiple terabyte) caused
by type conversion errors in the x86 pat code - Matt Fleming
 -----BEGIN PGP SIGNATURE-----
 
 iQI2BAABCAAgBQJX4UkgGRxtYXR0QGNvZGVibHVlcHJpbnQuY28udWsACgkQLzhZ
 wI0jPVWaoA/9EqgJqgXP5JSoV5EFzGA0uyE65J46hhmpqry0gnJ0Jv4lf9nWVShI
 iYm3VRW2bIjF6sNKw/Z9ZFzhXY96bn3axlPwoMbwsuCJoWHwIG0dYkI+N4oQGcaR
 7xX5hrnWeRPdU28wTZNyvqWBojXJcY2Cv3mg+/1/wByL7wABljcAxmr3a0Vk1j/R
 UsAdWKz0AFYMnKKhfwcmIwTRDFXlzmCVNP1luycFNjVXALW7vHOIav7Wzn7ZMCfv
 Nd6FYlabUm5Nq/o8o7QD/KniBj/0maurBq2jnbtV/Iim6OsMpN62AsXYY06QNtrp
 IlrDb4RIYJa+Oi4VDpjoEZicBlVuEBBJaziS3bPMUlswkO2S/v7LvddIqqEm/K1V
 rqLTpcx+O66LODs1GHz2hDd/T8I5lHsR8F9ggmboQj8kTze4kowpeN4kuTB91+oK
 4gybkXiB7olrjdWCxPe2UE/2c325nHsSmuObDmfJjTxCn1zsbJY233oXLLfaiMgn
 y4URazGH7m2kTAfjbwfJQKLMAz9AOItxaY4f2nIO6BM/ZaNM59CyGQUKU9muhecd
 p/e8qJtyP4narwtDFWm5XMUybS3W46F5jAAux1AGi83vhpfbVjnvajm5wzeonTq3
 pAS3NBWMuJ0xHQsq/zkI+S5bvzErsQKwV0p+tNhpKSb0n72tDaN+CYk=
 =qMBL
 -----END PGP SIGNATURE-----

Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/urgent

Pull EFI fixes from Matt Fleming:

 * Fix a boot hang on large memory machines (multiple terabyte) caused
   by type conversion errors in the x86 PAT code (Matt Fleming)

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-20 16:56:56 +02:00
Marcin Wojtas
51227bf520 arm64: dts: marvell: fix clocksource for CP110 master SPI0
I2C and SPI interfaces share common clock trees within the CP110 HW block.
It occurred that SPI0 interface has wrong clock assignment in the device
tree, which is fixed in this commit to a proper value.

Fixes: 728dacc7f4 ("arm64: dts: marvell: initial DT description of ...")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
CC: <stable@vger.kernel.org> v4.7+
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-20 16:55:12 +02:00
Matt Fleming
92dc33501b x86/efi: Round EFI memmap reservations to EFI_PAGE_SIZE
Mike Galbraith reported that his machine started rebooting during boot
after,

  commit 8e80632fb2 ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()")

The ESRT table on his machine is 56 bytes and at no point in the
efi_arch_mem_reserve() call path is that size rounded up to
EFI_PAGE_SIZE, nor is the start address on an EFI_PAGE_SIZE boundary.

Since the EFI memory map only deals with whole pages, inserting an EFI
memory region with 56 bytes results in a new entry covering zero
pages, and completely screws up the calculations for the old regions
that were trimmed.

Round all sizes upwards, and start addresses downwards, to the nearest
EFI_PAGE_SIZE boundary.

Additionally, efi_memmap_insert() expects the mem::range::end value to
be one less than the end address for the region.

Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Reported-by: Mike Krinkin <krinkin.m.u@gmail.com>
Tested-by: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-20 15:43:31 +01:00
Vladimir Zapolskiy
23fe1fd01c ARM: imx legacy: pca100: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:39:07 +08:00
Vladimir Zapolskiy
f0ebbdc423 ARM: imx legacy: mx27ads: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:39:07 +08:00
Vladimir Zapolskiy
bfe16c894e ARM: imx legacy: mx21ads: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:39:06 +08:00
Vladimir Zapolskiy
782a8ee8b9 ARM: imx legacy: pcm043: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:39:06 +08:00
Vladimir Zapolskiy
c217147b93 ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:23 +08:00
Vladimir Zapolskiy
88b074626f ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:20 +08:00
Vladimir Zapolskiy
598b2505b1 ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:17 +08:00
Vladimir Zapolskiy
8f39bd1553 ARM: imx legacy: vpr200: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:14 +08:00
Vladimir Zapolskiy
1cecfa48d9 ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:11 +08:00
Vladimir Zapolskiy
a95a9322df ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:08 +08:00
Vladimir Zapolskiy
c5f9cfe60b ARM: imx legacy: qong: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:04 +08:00
Vladimir Zapolskiy
ce689b0de5 ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:35:00 +08:00
Vladimir Zapolskiy
347aa6c413 ARM: imx legacy: pcm037: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:34:57 +08:00
Vladimir Zapolskiy
7880dcb259 ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:34:54 +08:00
Vladimir Zapolskiy
894b7cbedf ARM: imx legacy: mx31ads: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:34:51 +08:00
Vladimir Zapolskiy
4ed9bb2184 ARM: imx legacy: mx31lite: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:34:47 +08:00
Vladimir Zapolskiy
4bc2e627c5 ARM: imx legacy: kzm: move peripheral initialization to .init_late
The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

The change is tested on qemu kzm target.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-20 22:33:10 +08:00
Sebastian Andrzej Siewior
f1e1c9e5e3 perf/x86/intel/bts: Make sure debug store is valid
Since commit 4d4c474124 ("perf/x86/intel/bts: Fix BTS PMI detection")
my box goes boom on boot:

| .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
| BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
| IP: [<ffffffff8100c463>] intel_bts_interrupt+0x43/0x130
| Call Trace:
|  <NMI> d [<ffffffff8100b341>] intel_pmu_handle_irq+0x51/0x4b0
|  [<ffffffff81004d47>] perf_event_nmi_handler+0x27/0x40

This happens because the code introduced in this commit dereferences the
debug store pointer unconditionally. The debug store is not guaranteed to
be available, so a NULL pointer check as on other places is required.

Fixes: 4d4c474124 ("perf/x86/intel/bts: Fix BTS PMI detection")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: vince@deater.net
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20160920131220.xg5pbdjtznszuyzb@breakpoint.cc
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-20 16:06:09 +02:00
Matt Fleming
1297667083 x86/efi: Only map RAM into EFI page tables if in mixed-mode
Waiman reported that booting with CONFIG_EFI_MIXED enabled on his
multi-terabyte HP machine results in boot crashes, because the EFI
region mapping functions loop forever while trying to map those
regions describing RAM.

While this patch doesn't fix the underlying hang, there's really no
reason to map EFI_CONVENTIONAL_MEMORY regions into the EFI page tables
when mixed-mode is not in use at runtime.

Reported-by: Waiman Long <waiman.long@hpe.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
CC: Theodore Ts'o <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-20 14:53:04 +01:00
Matt Fleming
e535ec0899 x86/mm/pat: Prevent hang during boot when mapping pages
There's a mixture of signed 32-bit and unsigned 32-bit and 64-bit data
types used for keeping track of how many pages have been mapped.

This leads to hangs during boot when mapping large numbers of pages
(multiple terabytes, as reported by Waiman) because those values are
interpreted as being negative.

commit 742563777e ("x86/mm/pat: Avoid truncation when converting
cpa->numpages to address") fixed one of those bugs, but there is
another lurking in __change_page_attr_set_clr().

Additionally, the return value type for the populate_*() functions can
return negative values when a large number of pages have been mapped,
triggering the error paths even though no error occurred.

Consistently use 64-bit types on 64-bit platforms when counting pages.
Even in the signed case this gives us room for regions 8PiB
(pebibytes) in size whilst still allowing the usual negative value
error checking idiom.

Reported-by: Waiman Long <waiman.long@hpe.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
CC: Theodore Ts'o <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-20 14:53:00 +01:00
Russell King
cf6e4ca3e5 ARM: sa1111: add sa1111_get_irq()
Add a helper function to get the irq number for a device.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-20 14:21:08 +01:00
Russell King
1629c9ab36 ARM: sa1111: clean up duplication in IRQ chip implementation
Clean up the duplication in the IRQ chip implementation - we can compute
the register address from the interrupt number rather than duplicating
the code for each register.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-20 14:21:08 +01:00
Russell King
17cf50116e ARM: sa1111: implement a gpio_chip for SA1111 GPIOs
Add a gpio_chip instance for SA1111 GPIOs.  This allows us to use
gpiolib to lookup and manipulate SA1111 GPIOs.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-20 14:21:08 +01:00
Russell King
ccb7d854d6 ARM: sa1111: move irq cleanup to separate function
Move the SA1111 interrupt cleanup to a separate function, so it can be
re-used in the probe error cleanup path.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-20 14:21:08 +01:00
Russell King
deee856a5c ARM: sa1111: use devm_clk_get()
Convert sa1111 to use devm_clk_get() to get its clock resource, and
strip out the clk_put() calls.  This simplifies the error handling
a little.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-20 14:21:07 +01:00
Russell King
7d53c1f012 ARM: sa1111: use devm_kzalloc()
Use devm_kzalloc() to allocate our driver data, so we can eliminate its
kfree() from the device removal and error cleanup paths.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-20 14:21:07 +01:00
Russell King
eac8dbf74f ARM: sa1111: ensure we only touch RAB bus type devices when removing
When removing a SA1111 device, we try to remove all child devices.
However, we must only remove our own RAB bus typed devices from the
tree, there may be other devices present which should not be touched.

This is necessary before we introduce gpiochip to SA1111 to avoid
incorrectly trying to remove the gpiochip device, leading to an oops
in __release_resource().

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-20 14:21:07 +01:00
Paul Gortmaker
dcc096c540 s390: migrate exception table users off module.h and onto extable.h
These files were only including module.h for exception table
related functions.  We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.

The additions of uaccess.h are to deal with implict includes like:

arch/s390/kernel/traps.c: In function 'do_report_trap':
arch/s390/kernel/traps.c:56:4: error: implicit declaration of function 'extable_fixup' [-Werror=implicit-function-declaration]
arch/s390/kernel/traps.c: In function 'illegal_op':
arch/s390/kernel/traps.c:173:3: error: implicit declaration of function 'get_user' [-Werror=implicit-function-declaration]

Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-09-20 14:26:38 +02:00
Sebastian Ott
ecc6410abf s390: export header for CLP ioctl
Export clp.h for usage by userspace.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-09-20 14:26:35 +02:00
Christian Borntraeger
c42d8c7dbe s390: enable UBSAN
This enables UBSAN for s390. We have to disable the null sanitizer
as s390 code does access memory via a null pointer (the prefix page).

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-09-20 14:26:23 +02:00
Masahiro Yamada
f296190e41 s390/crashdump: use list_first_entry_or_null
The combo of list_empty() check and return list_first_entry()
can be replaced with list_first_entry_or_null().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-09-20 14:26:04 +02:00