Commit graph

127,691 commits

Author SHA1 Message Date
Alexander Aring
5ec6f2cd8e ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.
This connects the USB driver to the USB power domain, so that USB can
actually be turned on at boot if the bootloader didn't do it for us.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
2016-02-02 20:02:45 -08:00
Lubomir Rintel
7a1298e339 ARM: bcm2835: dt: Add Raspberry Pi Model A
This one is essentially the same as revision 2 B board (with the I2S on
P5 header).

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
[anholt: Rebased on bcm2835.dtsi -> bcm283x.dtsi change]
Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-02 18:01:26 -08:00
Martin Sperl
68e2ef17a5 ARM: bcm2835: follow dt uart node-naming convention
This patch fixes the naming of the device tree node: uart@7e201000
to conform to the standard of: serial@7e201000

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
[anholt: Rebased on 2835.dtsi -> 283x.dtsi change]
Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-02 18:01:26 -08:00
Remi Pommarel
40ad4499ba ARM: bcm2835: Add PWM clock support to the device tree
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
[anholt: Rebased on 2835.dtsi -> 283x.dtsi change]
Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-02 18:01:25 -08:00
Martin Sperl
f974d685d2 ARM: bcm2835: add the auxiliary spi1 and spi2 to the device tree
This enables the use of the auxiliary spi1 and spi2 devices
on the bcm2835 SOC.

Note that this requires the use of the new clk-bcm2835-aux to work.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
[anholt: Rebased on 2835.dtsi -> 283x.dtsi change]
Signed-off-by: Eric Anholt <eric@anholt.net>
2016-02-02 18:01:16 -08:00
Xing Zheng
f6bb9d5f30 ARM: dts: rockchip: increase the mclk_fs to 512 for kylin board
If we playback the 8KHz FS audio with the 256 mclk_fs, we need the
mclk = 256 * 8000 = 2.048MHz, the frac div is 594 / 2.048 = 290,
the frac div value 0x00809015 set to the CRU_CLKSEL7_CON will cause
to hang.

We increase the mclk_fs to 512, will get the mclk = 512 * 8000 =
4.096MHz, use 0x01009015 instead of 0x00809015 to work around this
issue. We will keep tracking it.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-02-02 22:42:37 +01:00
Caesar Wang
f629fcfab2 ARM: dts: rockchip: support the spi for rk3036
This patch adds the needed spi node for rk3036 dts.

We have to use the 4 bus emmc to work if someone want to support
the spi devices, since the pins are re-used by emmc data[5-8] and spi.
In some caseswe need to support the spi devices, that will waste the
emmc performance.

Moment, the kylin/evb hasn't the spi devices to work, so maybe we need wait
the new required to enable in kylin/evb board.

Anyway, the spi should be needed land in rk3036 dts.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-02-02 22:24:04 +01:00
Caesar Wang
8f338ecf0c ARM: dts: rockchip: add mclk for rt5616 on rk3036 kylin board
The I2S block that provide the output clock as the mclk for rt5616,
That will be the master clock input.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-02-02 22:21:40 +01:00
Florian Fainelli
6580566e10 ARM: BCM63xx: Remove unused pmb_dn variable
Introduced in commit 3f2a43c98d ("ARM: BCM63xx: Add secondary CPU PMB
initialization sequence"), but not used by the code.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-02-02 10:47:08 -08:00
Sebastian Reichel
771120761f ARM: OMAP2+: hwmod data: Add SSI data for omap36xx
This patch enables Synchronous Serial Interface (SSI)
hwmod support for OMAP36xx SoCs (used by Nokia N950/N9).

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2016-02-02 10:06:13 -07:00
James Morse
811d61e384 arm64: futex.h: Add missing PAN toggling
futex.h's futex_atomic_cmpxchg_inatomic() does not use the
__futex_atomic_op() macro and needs its own PAN toggling. This was missed
when the feature was implemented.

Fixes: 338d4f49d6 ("arm64: kernel: Add support for Privileged Access Never")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-02 15:59:21 +00:00
Ard Biesheuvel
95f5c80050 arm64: allow vmalloc regions to be set with set_memory_*
The range of set_memory_* is currently restricted to the module address
range because of difficulties in breaking down larger block sizes.
vmalloc maps PAGE_SIZE pages so it is safe to use as well. Update the
function ranges and add a comment explaining why the range is restricted
the way it is.

Suggested-by: Laura Abbott <labbott@fedoraproject.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-02 15:42:15 +00:00
Geert Uytterhoeven
653f502d77 arm64: dts: r8a7795: Add SCIF fallback compatibility strings
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-02 12:20:08 +01:00
Yoshihiro Shimoda
652a4306be arm64: dts: r8a7795: Add USB-DMAC device nodes
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-02 12:20:04 +01:00
Yoshihiro Shimoda
856ea9eddb arm64: dts: salvator-x: enable usb3.0 host channel 0
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-02 10:48:56 +01:00
Chen-Yu Tsai
6b279560dd ARM: dts: sun9i: a80-optimus: Remove i2c3 and uart4
i2c3 and uart4 are available on the GPIO header. Though these pins only
have this one special function, the user may choose to use them as GPIOs
instead.

Since our policy is not to choose what function to present on the GPIO
headers of development boards, remove them.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-02 10:14:44 +01:00
Fabio Estevam
f9e37c683c ARM: mxs_defconfig: Select CONFIG_NVMEM_MXS_OCOTP
Select the mxs ocotp driver.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-02 16:13:03 +08:00
Fabio Estevam
007270f136 ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_IMX_OCOTP
Select the i.mx ocotp driver.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-02 16:12:20 +08:00
Johannes Berg
26e30c6489 ARM: imx: enable big endian mode
Enable ARM big-endian mode on mach-imx. This requires adding some
byte swapping in the debug functions (which otherwise hang forever)
and of course the secondary core bringup.

Tested (on top of 4.4) on i.MX6 HummingBoard quad-core (IMX6Q).

The patch is pretty much as suggested by Arnd Bergmann, thanks!

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-02 13:31:19 +08:00
Johannes Berg
c553138fbd ARM: imx: use endian-safe readl/readw/writel/writew
Instead of __raw_*, define imx_* to *_relaxed and use those.

Using imx_* was requested by Arnd because *_relaxed tends to
indicate that the code was carefully reviewed to not require
any synchronisation and otherwise be safe, which isn't the
case here with the automatic conversion.

The conversion itself was done using the following spatch
(since that automatically adjusts the coding style unlike
a simple search&replace).

@@
expression E1, E2;
@@
-__raw_writel(E1, E2)
+imx_writel(E1, E2)
@@
expression E1, E2;
@@
-__raw_writew(E1, E2)
+imx_writew(E1, E2)
@@
expression E1;
@@
-__raw_readl(E1)
+imx_readl(E1)
@@
expression E1;
@@
-__raw_readw(E1)
+imx_readw(E1)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-02 13:24:17 +08:00
Maciej W. Rozycki
7aa7047100 MIPS: traps.c: Correct microMIPS RDHWR emulation
Fix the code to fetch and decode the whole 32-bit instruction.  This
only really matters with the `noulri' kernel parameter as all microMIPS
processors are supposed to have all the hardware registers we support.

Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12281/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-02-02 02:16:29 +01:00
Maciej W. Rozycki
10f6d99f0f MIPS: traps.c: Don't emulate RDHWR in the CpU #0 exception handler
In the regular MIPS instruction set RDHWR is encoded with the SPECIAL3
(011111) major opcode.  Therefore it cannot trigger the CpU (Coprocessor
Unusable) exception, and certainly not for coprocessor 0, as the opcode
does not overlap with any of the older ISA reservations, i.e. LWC0
(110000), SWC0 (111000), LDC0 (110100) or SDC0 (111100).  The closest
match might be SDC3 (111111), possibly causing a CpU #3 exception,
however our code does not handle it anyway.  A quick check with a MIPS I
and a MIPS III processor:

CPU0 revision is: 00000220 (R3000)
CPU0 revision is: 00000440 (R4400SC)

indeed indicates that the RI (Reserved Instruction) exception is
triggered.  It's only LL and SC that require emulation in the CpU #0
exception handler as they reuse the LWC0 and SWC0 opcodes respectively.

In the microMIPS instruction set RDHWR is mandatory and triggering the
RI exception is required on unimplemented or disabled register accesses.
Therefore emulating the microMIPS instruction in the CpU #0 exception
handler is not required either.

Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12280/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-02-02 02:16:11 +01:00
Linus Torvalds
34229b2774 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "This looks like a lot but it's a mixture of regression fixes as well
  as fixes for longer standing issues.

   1) Fix on-channel cancellation in mac80211, from Johannes Berg.

   2) Handle CHECKSUM_COMPLETE properly in xt_TCPMSS netfilter xtables
      module, from Eric Dumazet.

   3) Avoid infinite loop in UDP SO_REUSEPORT logic, also from Eric
      Dumazet.

   4) Avoid a NULL deref if we try to set SO_REUSEPORT after a socket is
      bound, from Craig Gallek.

   5) GRO key comparisons don't take lightweight tunnels into account,
      from Jesse Gross.

   6) Fix struct pid leak via SCM credentials in AF_UNIX, from Eric
      Dumazet.

   7) We need to set the rtnl_link_ops of ipv6 SIT tunnels before we
      register them, otherwise the NEWLINK netlink message is missing
      the proper attributes.  From Thadeu Lima de Souza Cascardo.

   8) Several Spectrum chip bug fixes for mlxsw switch driver, from Ido
      Schimmel

   9) Handle fragments properly in ipv4 easly socket demux, from Eric
      Dumazet.

  10) Don't ignore the ifindex key specifier on ipv6 output route
      lookups, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (128 commits)
  tcp: avoid cwnd undo after receiving ECN
  irda: fix a potential use-after-free in ircomm_param_request
  net: tg3: avoid uninitialized variable warning
  net: nb8800: avoid uninitialized variable warning
  net: vxge: avoid unused function warnings
  net: bgmac: clarify CONFIG_BCMA dependency
  net: hp100: remove unnecessary #ifdefs
  net: davinci_cpdma: use dma_addr_t for DMA address
  ipv6/udp: use sticky pktinfo egress ifindex on connect()
  ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail()
  netlink: not trim skb for mmaped socket when dump
  vxlan: fix a out of bounds access in __vxlan_find_mac
  net: dsa: mv88e6xxx: fix port VLAN maps
  fib_trie: Fix shift by 32 in fib_table_lookup
  net: moxart: use correct accessors for DMA memory
  ipv4: ipconfig: avoid unused ic_proto_used symbol
  bnxt_en: Fix crash in bnxt_free_tx_skbs() during tx timeout.
  bnxt_en: Exclude rx_drop_pkts hw counter from the stack's rx_dropped counter.
  bnxt_en: Ring free response from close path should use completion ring
  net_sched: drr: check for NULL pointer in drr_dequeue
  ...
2016-02-01 15:56:08 -08:00
Linus Torvalds
2c923414d3 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

  API:
   - algif_hash needs to wait for init operations to complete.
   - The has_key setting for shash was always true.

  Algorithms:
   - Add missing selections of CRYPTO_HASH.
   - Fix pkcs7 authentication.

  Drivers:
   - Fix stack alignment bug in chacha20-ssse3.
   - Fix performance regression in caam due to incorrect setting.
   - Fix potential compile-only build failure of stm32"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: atmel-aes - remove calls of clk_prepare() from atomic contexts
  crypto: algif_hash - wait for crypto_ahash_init() to complete
  crypto: shash - Fix has_key setting
  hwrng: stm32 - Fix dependencies for !HAS_IOMEM archs
  crypto: ghash,poly1305 - select CRYPTO_HASH where needed
  crypto: chacha20-ssse3 - Align stack pointer to 64 bytes
  PKCS#7: Don't require SpcSpOpusInfo in Authenticode pkcs7 signatures
  crypto: caam - make write transactions bufferable on PPC platforms
2016-02-01 15:49:18 -08:00
James Hogan
00fe56dca6 MIPS: Fix FPU disable with preemption
The FPU should not be left enabled after a task context switch. This
isn't usually a problem as the FPU enable bit is updated before
returning to userland, however it can potentially mask kernel bugs, and
in fact KVM assumes it won't happen and won't clear the FPU enable bit
before returning to the guest, which allows the guest to use stale FPU
context.

Interrupts and exceptions save and restore most bits of the CP0 Status
register which contains the FPU enable bit (CU1). When the kernel needs
to enable or disable the FPU (for example due to attempted FPU use by
userland, or the scheduler being invoked) both the actual Status
register and the saved value in the userland context are updated.

However this doesn't work correctly with full kernel preemption enabled,
since the FPU enable bit can be cleared from within an interrupt when
the scheduler is invoked, and only the userland context is updated, not
the interrupt context.

For example:
1) Enter kernel with FPU already enabled, TIF_USEDFPU=1, Status.CU1=1
   saved.
2) Take a timer interrupt while in kernel mode, Status.CU1=1 saved.
3) Timer interrupt invokes scheduler to preempt the task, which clears
   TIF_USEDFPU, disables the FPU in Status register (Status.CU1=0), and
   the value stored in user context from step (1), but not the interrupt
   context from step (2).
4) When the process is scheduled back in again Status.CU1=0.
5) The interrupt context from step (2) is restored, which sets
   Status.CU1=1. So from user context point of view, preemption has
   re-enabled FPU!
6) If the scheduler is invoked again (via preemption or voluntarily)
   before returning to userland, TIF_USEDFPU=0 so the FPU is not
   disabled before the task context switch.
7) The next task resumes from the context switch with FPU enabled!

The restoring of the Status register on return from interrupt/exception
is already selective about which bits to restore, leaving the interrupt
mask bits alone so enabling/disabling of CPU interrupt lines can
persist. Extend this to also leave both the CU1 bit (FPU enable) and the
FR bit (which specifies the FPU mode and gets changed with CU1). This
prevents a stale Status value being restored in step (5) above and
persisting through subsequent context switches.

Also switch to the use of definitions from asm/mipsregs.h while we're at
it.

Since this change also affects the restoration of Status register on the
path back to userland, it increases the sensitivity of the kernel to the
problem of the FPU being left enabled, allowing it to propagate to
userland, therefore a warning is also added to lose_fpu_inatomic() to
point out any future reoccurances before they do any damage.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12303/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-02-01 23:36:38 +01:00
James Hogan
76e5846d3b MIPS: Properly disable FPU in start_thread()
start_thread() (called for execve(2)) clears the TIF_USEDFPU flag
without atomically disabling the FPU. With a preemptive kernel, an
unfortunately timed preemption after this could result in another
task (or KVM guest) being scheduled in with the FPU still enabled, since
lose_fpu_inatomic() only turns it off if TIF_USEDFPU is set.

Use lose_fpu(0) instead of the separate FPU / MSA management, which
should do the right thing (drop FPU properly and atomically without
saving state) and will be more future proof.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12302/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-02-01 23:36:03 +01:00
James Hogan
f4dce1ffd2 MIPS: Fix buffer overflow in syscall_get_arguments()
Since commit 4c21b8fd8f ("MIPS: seccomp: Handle indirect system calls
(o32)"), syscall_get_arguments() attempts to handle o32 indirect syscall
arguments by incrementing both the start argument number and the number
of arguments to fetch. However only the start argument number needs to
be incremented. The number of arguments does not change, they're just
shifted up by one, and in fact the output array is provided by the
caller and is likely only n entries long, so reading more arguments
overflows the output buffer.

In the case of seccomp, this results in it fetching 7 arguments starting
at the 2nd one, which overflows the unsigned long args[6] in
populate_seccomp_data(). This clobbers the $s0 register from
syscall_trace_enter() which __seccomp_phase1_filter() saved onto the
stack, into which syscall_trace_enter() had placed its syscall number
argument. This caused Chromium to crash.

Credit goes to Milko for tracking it down as far as $s0 being clobbered.

Fixes: 4c21b8fd8f ("MIPS: seccomp: Handle indirect system calls (o32)")
Reported-by: Milko Leporis <milko.leporis@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15-
Patchwork: https://patchwork.linux-mips.org/patch/12213/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-02-01 23:27:08 +01:00
Masahiro Yamada
9480e085c3 ARM: bcm: use const and __initconst for smp_operations
This newly added code missed the global fixup by commit 75305275a7
("ARM: use const and __initconst for smp_operations").  So fix it now.

Also, add missing "static" qualifier.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-02-01 13:11:13 -08:00
Greg Kroah-Hartman
6e9131cc43 Merge 4.5-rc2 into tty-next
We want the tty/serial fixes in here as well to make merges easier.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-01 12:53:14 -08:00
Arnd Bergmann
f29327d908 ARM: pxa: don't select RFKILL if CONFIG_NET is disabled
Bluetooth is only supported when network support is part of the kernel,
so it is a bit pointless to build the tosa-bt support without networking.
If we try anyway, we get a Kconfig warning:

warning: (TOSA_BT && H1940BT) selects RFKILL which has unmet direct dependencies (NET)

This adds a dependency on CONFIG_NET to avoid that case.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01 21:44:33 +01:00
Arnd Bergmann
343c1cdbc8 ARM: pxa: fix building without IWMMXT
When CONFIG_IWMMXT, the pxa3xx and pxa27x suspend/resume code
emits some xscale specific instructions, which are rejected
by the assembler, because gcc is built with -march=armv5
-mtune=xscale and passes that option to the assembler:

/tmp/cciHumzr.s:553: Error: selected processor does not support ARM mode `mra r2,r3,acc0'
/tmp/cciHumzr.s:605: Error: selected processor does not support ARM mode `mar acc0,r2,r3'
make[3]: *** [arch/arm/mach-pxa/pxa3xx.o] Error 1
/tmp/cci5MUNu.s:326: Error: selected processor does not support ARM mode `mra r2,r3,acc0'
/tmp/cci5MUNu.s:367: Error: selected processor does not support ARM mode `mar acc0,r2,r3'
make[3]: *** [arch/arm/mach-pxa/pxa27x.o] Error 1

Overriding with -Wa,-march=xscale no longer works, so instead
I'm adding an explict ".arch_extension" directive in all four inline
assembly statements, which should work even if they end up in a different
order in the assembly output.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01 21:44:29 +01:00
Arnd Bergmann
a9a54caed9 ARM: pxa: move extern declarations to pm.h
When CONFIG_IWMMXT is disabled, we get a warning in pxa3xx.c:

arch/arm/mach-pxa/pxa3xx.c: In function 'pxa3xx_cpu_pm_suspend':
arch/arm/mach-pxa/pxa3xx.c:109:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]

It turns out that there is an 'extern' declaration in the
middle of a function.

For consistency, this moves the declaration and two others from
the same file into pm.h.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01 21:44:27 +01:00
Arnd Bergmann
2f20286159 ARM: pxa: always select one of the two CPU types
When all boards are disabled on PXA, we cannot build a kernel
because no CPU gets selected:

arch/arm/include/uapi/asm/swab.h:26:29: error: "__LINUX_ARM_ARCH__" is not defined [-Werror=undef]

This is a bit annoying for compile-testing, so I'm adding a line
that ensures that at all times, at least one of CPU_XSCALE or
CPU_XSC3 is set and we can at least continue building.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01 21:44:24 +01:00
Arnd Bergmann
55e70147e7 ARM: pxa: don't select GPIO_SYSFS for MIOA701
GPIO_SYSFS is a common kernel functionality, not something
that a board specific Kconfig should have to worry about.
In MIOA701, we get a warning about the select when CONFIG_SYSFS
is disabled:

warning: (MACH_MIOA701) selects GPIO_SYSFS which has unmet direct dependencies (GPIOLIB && SYSFS)

This just removes the select and instead enables the symbol in
the defconfig file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01 21:44:17 +01:00
Arnd Bergmann
0a137a1a38 ARM: pxa: mark unused eseries code as __maybe_unused
Two variables in eseries.c are used on multiple platforms,
but are not referenced when those are all disabled:

eseries.c:60:31: warning: 'e7xx_gpio_vbus' defined but not used [-Wunused-variable]
eseries.c:129:20: warning: 'eseries_register_clks' defined but not used [-Wunused-function]

Marking them __maybe_unused is the nicest way to ensure
that we never get the warning or end up with missing symbols
if we get it wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01 21:44:12 +01:00
Arnd Bergmann
289873476e ARM: pxa: mark spitz_card_pwr_ctrl as __maybe_unused
This function is only used when CONFIG_PCMCIA is enabled, otherwise
we get a harmless warning:

arch/arm/mach-pxa/spitz.c:204:13: warning: 'spitz_card_pwr_ctrl' defined but not used [-Wunused-function]

Marking it as __maybe_unused keeps the logic simple and avoids the
warning on randconfig builds.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01 21:44:08 +01:00
Arnd Bergmann
ea7743e271 ARM: pxa: define clock registers as __iomem
We should not dereference registers as pointers, so use readl/writel
instead for these registers.

The clock registers are accessed in multiple files, so we have to
change them all at once.

I stumbled over these registers while looking at something unrelated.
There are in fact other registers with the same problem, but I did
not try to address those at this point.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-02-01 21:43:41 +01:00
Olof Johansson
aa5306a370 vexpress fixes for v4.5
Couple of minor fixes for vexpress platforms:
 1. Add missing of_node_put in vexpress config bus
 2. Add missing DMA-330 abort interrupt on Juno platforms
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJWr2b+AAoJEABBurwxfuKYlp8P/jdQGvYBU9u3I0H/LxqzNse8
 XmE4OPWzt8VHVPNeEf3DTAwSZGdFA6nN60s0TjhjQoNR3ugADi9aLQ/sgv7HVTF8
 LHo8ZuYGEte+b9taTcLb/fYVZbX2zrge1eVRR2OUhpvCnQb45Ne3VulvpBAhx32u
 WGA+1UXR93PL6arj7Sb34bnPoTpRMrE1595oenVamKLB2GNRJDp2KjkEr8fW+jb5
 a9OHp6S25ADIzIff3psXJqltDmFFCFtS0FXtzRhgKigHnJ7mohI8C6rvTU8jm1qB
 QlwIpIpMdSj9OnT4eLcqLNhGcx/P6GiA2z1rZ70qbQEo0qaYm4LM7G9BsvW5+bSB
 ZqDyURqLS2A0rC7lpcFVbGssoqTkVKWx4Y2VT6x8jJCLd5hkqp7lrhAAXcPP2Qhm
 1zG5VvsFED0klUGs4E+71HnjxSIU0NchS1kZqL2yUIn5Mg3ZatgXGNOTvcSz2bGt
 HH5vKVH499TM2MuN7mlu7wdKM+CIAStbQylX9iOLE7Oc034DhR6XvIE6QTWjWpS9
 um/oQpkgGqsuj/XoSu7B9iFdCGEf4/uff5PuVI6LN3rOOVOSw/glZHT4CXdCedGC
 R9P/6KOJ/8nv4NJIDxa4+meW6DLI+a2bfRPshbeg1wZtvr3QompS0I3RQozhC/mF
 HvjVjQKUr162PgGUw2BU
 =E8cV
 -----END PGP SIGNATURE-----

Merge tag 'vexpress-for-v4.5/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes

vexpress fixes for v4.5

Couple of minor fixes for vexpress platforms:
1. Add missing of_node_put in vexpress config bus
2. Add missing DMA-330 abort interrupt on Juno platforms

* tag 'vexpress-for-v4.5/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: Add missing DMA Abort interrupt to Juno
  bus: vexpress-config: Add missing of_node_put

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:27:18 -08:00
Olof Johansson
6c388927a7 mvebu fixes for 4.5 (part 1)
- Fix dts on buffalo linksations machines (gpios and leds)
 - Fix dts partition node according to new binding introduced in v4.5
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlarqHEACgkQCwYYjhRyO9U9EwCgrIBJ9aWaYISd9+4lklVH647f
 RYoAniRo8RbO+VoZchRCLdAe0ZR8AlaL
 =/RvS
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-fixes-4.5-1' of git://git.infradead.org/linux-mvebu into fixes

mvebu fixes for 4.5 (part 1)

- Fix dts on buffalo linksations machines (gpios and leds)
- Fix dts partition node according to new binding introduced in v4.5

* tag 'mvebu-fixes-4.5-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl
  ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl
  ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl
  ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vl
  ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl
  ARM: mvebu: ix4-300d: Add compatible property to "partitions" node
  ARM: mvebu: kirkwood: Add compatible property to "partitions" node

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:24:31 -08:00
Olof Johansson
7f7420f07e Fixes for omaps with the most intrusive stuff being read-only data
assembly fixes, the other things are mostly board related:
 
 - A series of omap assembly code fixes to fix issues with rodata with
   ARM_KERNMEM_PERMS enabled. We had several places writing to rodata,
   which is bad. The fix in most cases is to load the value from data
   section using a pointer. Let's also enable ARM_KERNMEM_PERMS so
   DEBUG_RODATA gets selected by default. And while testing things,
   I also added few more loadable driver modules to the defconfig that
   I seem to need quite often.
 
 - Fix a long standing omap5 RTC mystery and enable RTC where we need
   to ensure the SoC msecure pin is high so we can write to the RTC
   registers.
 
 - Fix irq types for am437x
 
 - A series of minor dts fixes for sbc-am57x and cl-som-am57x
 
 - Fixes for torpedo dts to make WLAN behave and to remove a duplicate
   i2c rate entry
 
 This series also includes few minor changes that are not stricly
 fixes, but would be good to get in during the early -rc cycle:
 
 - Remove legacy mailbox platform data that is no longer needed
 
 - Add the pdata-quirks needed for the new pwm-omap-dmtimer so
   people can use it
 
 - Enable ti,mbox-send-noirq that's needed by wkup_m3 driver
 
 - Enable SPLIT and DWARF4 in omap2plus_defconfig as it makes the
   initramfs quite a bit smaller
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWqT5XAAoJEBvUPslcq6Vz01kP/jdo4hXcvUgtG9W5yIxortiK
 Sg2D0omkQzwgNHhh9K/ezOYaGwgRJ8grEkCYImlr7n/zGr7Mpt3eUiJC7gbV8xg4
 nEPNxGoIQSQ3A0NVV+6gtnHHco4ajih/l7A+0UDZy/x375VExW46HS0KLWy2hov9
 WgEJDNBIZBdBN3S3CJ2pO1+I4KHkk9vqaDHjfDaSnyQXRKxQTziubnk5KhfcYpMS
 0fDY9BqJFDp0gbE3Dp3GOk/eEW+6XQAUFxK2i+rp3fmOhENBbbEAPWJ4qM8VFQr+
 ITQdd2o/SXE3hnqoXLMpCBFPSBDD7UMoxIp3gtMu/YwRePw8zETeQKYuHwSO69oz
 BKoKXJKg1WfiTquCzwijlqvOhMi0KzVSBi+X5MSQaUl+30qrHXdY4ecHvQAzp9vZ
 OtkCLI5SLmxCRLQllssifey91IfaWEm01So/XgvSgqUVfTLrUcBU5emlgwK5NMy5
 ya6NsOu0ME9k6GuGCWupGnVpUHlIAj4e60xisiVYI9GP4sN8aCey/RiOR+rWZW+C
 YYYxttRqRlwKH1VHNow0aWCG15hNjWGW8XWCSNyJeCCigObEwQxBE1xfAwGeGZ5s
 FA+ogfZesvPu/u1ychgF1e0w30P9AnWhTt1dTR7TNxLBqFsrbhWz+r0jOTzrlYaR
 6l2eMQYPlQ4569rGIbdF
 =NqvQ
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.5/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps with the most intrusive stuff being read-only data
assembly fixes, the other things are mostly board related:

- A series of omap assembly code fixes to fix issues with rodata with
  ARM_KERNMEM_PERMS enabled. We had several places writing to rodata,
  which is bad. The fix in most cases is to load the value from data
  section using a pointer. Let's also enable ARM_KERNMEM_PERMS so
  DEBUG_RODATA gets selected by default. And while testing things,
  I also added few more loadable driver modules to the defconfig that
  I seem to need quite often.

- Fix a long standing omap5 RTC mystery and enable RTC where we need
  to ensure the SoC msecure pin is high so we can write to the RTC
  registers.

- Fix irq types for am437x

- A series of minor dts fixes for sbc-am57x and cl-som-am57x

- Fixes for torpedo dts to make WLAN behave and to remove a duplicate
  i2c rate entry

This series also includes few minor changes that are not stricly
fixes, but would be good to get in during the early -rc cycle:

- Remove legacy mailbox platform data that is no longer needed

- Add the pdata-quirks needed for the new pwm-omap-dmtimer so
  people can use it

- Enable ti,mbox-send-noirq that's needed by wkup_m3 driver

- Enable SPLIT and DWARF4 in omap2plus_defconfig as it makes the
  initramfs quite a bit smaller

* tag 'omap-for-v4.5/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (23 commits)
  ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings
  ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux
  ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux
  ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency
  ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2
  ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address
  ARM: dts: LogicPD Torpedo: Revert Duplicative Entries
  ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types
  ARM: dts: am4372: fix irq type for arm twd and global timer
  ARM: dts: Fix wl12xx missing clocks that cause hangs
  ARM: OMAP: Add PWM dmtimer platform data quirks
  ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules
  ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata
  ARM: OMAP2+: Fix l2_inv_api_params for rodata
  ARM: OMAP2+: Fix save_secure_ram_context for rodata
  ARM: OMAP2+: Fix l2dis_3630 for rodata
  ARM: OMAP2+: Fix wait_dll_lock_timed for rodata
  ARM: OMAP2+: Remove legacy mailbox device instantiation
  ARM: dts: AM4372: Add ti,mbox-send-noirq to wkup_m3 mailbox
  ARM: dts: AM33xx: Add ti,mbox-send-noirq to wkup_m3 mailbox
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:22:52 -08:00
Olof Johansson
b83132f762 First fixes for 4.5. Only DT changes:
- sama5d4: error in DBGU index
 - addition of phy properties in several boards
 - at91sam9n12ek fix a panel compatible string
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJWqdjFAAoJEAf03oE53VmQG30H/R9luD6d9ebmhaOE7ay40HAy
 RrG8wtRQ/zgxf37SntoJxyVxxXWsDsb7sOR1LRXiT7FEGWr3Eip7B1uwmasC8pky
 ich2Yj5pGVUH+qscm26GDGyHbNwIrFOQyl1t/R6upVpITlXa0bpaEIXx3RejH8PN
 Wk4pMZg/4OkUXlcmYNU0Rz8ban8GfJ428bkLxMKeUXUAjvevNlWqTvOqC+QIrzUC
 w3iDoXfhc81sqrOzBzW44H28g7rh//d3TAfzMbM1BJti880QkP+CksG5qHvogI5f
 olN4+9QmV9tLXOr2K6iUkM8dwzHYW/3PPBR1CHODjSLP0rQ2Assy+DPxyO64Rtk=
 =jJrB
 -----END PGP SIGNATURE-----

Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes

First fixes for 4.5. Only DT changes:
- sama5d4: error in DBGU index
- addition of phy properties in several boards
- at91sam9n12ek fix a panel compatible string

* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
  ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt
  ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0
  ARM: dts: at91: sama5d2 xplained: add phy address and IRQ for macb0
  ARM: dts: at91: at91sam9n12ek: fix panel compatible string
  ARM: dts: at91: sama5d4: fix instance id of DBGU

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:21:15 -08:00
Jon Hunter
43acf83166 ARM64: tegra: Add chosen node for tegra132 norrin
The NVIDIA bootloader, nvtboot, expects the "chosen" node to be present
in the device-tree blob and if it is not then it fails to boot the kernel.
Add the chosen node so we can boot the kernel on Tegra132 Norrin with the
nvtboot bootloader.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:20:11 -08:00
Masahiro Yamada
c65cd255e4 ARM: realview: use "depends on" instead of "if" after prompt
This platform recently moved to multi-platform, so missed the global
fixup by commit e324654294 ("ARM: use "depends on" for SoC configs
instead of "if" after prompt").  Fix it now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:19:10 -08:00
Masahiro Yamada
990591ee39 ARM: tango: use "depends on" instead of "if" after prompt
This platform was recently added, so missed the global fixup by
commit e324654294 ("ARM: use "depends on" for SoC configs instead
of "if" after prompt").  Fix it now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:18:49 -08:00
Masahiro Yamada
c38ac80eb4 ARM: tango: use const and __initconst for smp_operations
This newly added code missed the global fixup by commit 75305275a7
("ARM: use const and __initconst for smp_operations").  So fix it now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:18:23 -08:00
Masahiro Yamada
567fdd9d91 ARM: realview: use const and __initconst for smp_operations
This newly added code missed the global fixup by commit 75305275a7
("ARM: use const and __initconst for smp_operations").  So fix it now.

Also, add missing "static" qualifier.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:17:30 -08:00
Robin Murphy
aeb2ee5683 arm64: dts: Add missing DMA Abort interrupt to Juno
The DMA-330 has an "irq_abort" interrupt line on which it signals faults
separately from the "irq[n:0]" channel interrupts. On Juno, this is
wired up to SPI 92; add it to the DT so that DMAC faults are correctly
reported for the driver to reset the thing, rather than leaving it
locked up and waiting to time out.

CC: Liviu Dudau <liviu.dudau@arm.com>
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-02-01 09:59:59 +00:00
Aravind Gopalakrishnan
e6c8f1873b x86/mce/AMD: Set MCAX Enable bit
It is required for the OS to acknowledge that it is using the
MCAX register set and its associated fields by setting the
'McaXEnable' bit in each bank's MCi_CONFIG register. If it is
not set, then all UC errors will cause a system panic.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1453750913-4781-9-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-01 10:53:59 +01:00
Borislav Petkov
429893b16d x86/mce/AMD: Carve out threshold block preparation
mce_amd_feature_init() was getting pretty fat, carve out the
threshold_block setup into a separate function in order to
simplify flow and make it more understandable.

No functionality change.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1453750913-4781-8-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-01 10:53:58 +01:00
Aravind Gopalakrishnan
f57a1f3c14 x86/mce/AMD: Fix LVT offset configuration for thresholding
For processor families with the Scalable MCA feature, the LVT
offset for threshold interrupts is configured only in MSR
0xC0000410 and not in each per bank MISC register as was done in
earlier families.

Obtain the LVT offset from the correct MSR for those families.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1453750913-4781-7-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-01 10:53:57 +01:00