Commit graph

127,691 commits

Author SHA1 Message Date
Sjoerd Simons
dfa31117db ARM: dts: rockchip: Add the SDIO wifi on Radxa Rock2 square
Enable the sdio0 slot on the Rock2 square which has a broadcom wifi chip
attached and add a power sequence to enable the wifi chip and turn on
the required 32k clock.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-25 09:16:59 +01:00
Krzysztof Kozlowski
cb4f2d7537 ARM: dts: Allow simultaneous usage exynos-rng and s5p-sss drivers on exynos5
The s5p-sss crypto HW acceleration driver supports only AES algorithms
thus it accesses only registers from feeder (offset 0x0, length 0x100)
and AES (offset 0x200, length 0x100) blocks of Security SubSystem (SSS).

The exynos-rng Pseudo Random Number Generator driver accesses only PRNG
block at offset 0x400 (length 0x100).

Narrow the size of memory mapped by s5p-sss driver so both drivers can
be loaded at the same time.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
2016-01-25 15:25:45 +09:00
Krzysztof Kozlowski
2c658a7300 ARM: exynos_defconfig: Enable s5p-secss driver
The Exynos SoC provides a Security SubSystem block for accelerating some
cryptographic operations. Enable the driver for it - s5p-secss to
utilize the hardware acceleration.

Currently the s5p-secss driver supports AES in CBC and ECB modes.
However on Odroid XU4 (Exynos5422) and Trats2 (Exynos4412) boards this
change introduces one booting error (because of unaligned buffers):

	alg: skcipher: encryption failed on chunk test 1 for ecb-aes-s5p: ret=22

The cbc-aes-s5p properly registers itself and passes self-tests.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-01-25 15:05:51 +09:00
Krzysztof Kozlowski
8904305a47 ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats
Enable the kernel NEON mode and asm/NEON accelerated crypto algorithms
which should bring performance benefits on Exynos SoCs. Enable these as
modules because they are optional, not essential anyhow for platform
booting nor related directly to Exynos Soc. All accelerated algorithms
pass booting self-tests on Odroid XU4 (Exynos5422) and Trats2 (Exynos4412).

Additionally enable cpufreq statistics as they are useful for debugging.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-01-25 15:05:13 +09:00
Vasant Hegde
e256caa7d0 powerpc/mm: Allow user space to map rtas_rmo_buf
With commit 90a545e9 (restrict /dev/mem to idle io memory ranges) mapping
rtas_rmo_buf from user space is failing. Hence we are not able to make
RTAS syscall.

This patch calls page_is_rtas_user_buf before calling iomem_is_exclusive
in  devmem_is_allowed(). This will allow user space to map rtas_rmo_buf
and we are able to make RTAS syscall.

Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
CC: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-01-25 16:31:13 +11:00
Pavel Fedin
a090435727 ARM: dts: Add Ethernet chip to exynos5410-smdk5410
The chip is smsc9115, connected via SROMc bank 3. Additionally, some GPIO
initialization is required.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-25 10:48:13 +09:00
Krzysztof Kozlowski
2c2012b4e2 Device Tree changes for v4.6 adding the nodes for Exynos SROM controller
driver. The driver saves and restores SROM registers during suspend to RAM.
 DT changes should go in before removal of SROM support from mach-exynos.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWpX5KAAoJEME3ZuaGi4PX7V0P/3BwhnNE/2ZWdc3i3zeU3SHC
 KCTETlK2m9xSN/gLQh1JakEl25I+YiOMM63x+dG2PvSIDNEeCu4MRuHkhANGoUHK
 7ZZcEp97Jps5YqMz8ky+1MWbF8CR9wCMjmaP5aXpfzR2KNK6nKJQY2MoP2GG+o3F
 sSt0QXEdGV7cuIErfmICI63wwLHP/c6DCvfu/JQZAgAC36g5TCxEfJfvEZYs2XFE
 JLBnr6jLT0MUIjxob6pIwq5rBllEVDpFi9Xn1LB8nwpWAsNe5dJ5A+BU1nUFBm/f
 a7h+DFwFOZmjwsda9f01L8xfRwaHHAXLlwIlKYANfp1OyWulhoYFqtu1Rrc97jpW
 VJ3yMR6OJo7IUac027l+dGW784xjOEC9WEjWluf0pCdWqkW1udu4z9K2t9QOu9cl
 +lCeUxzHfkMtoF4tU1jKII1srVnf1pBVhQLJqRtCT3Xo1n3QnYVeizr70z6WpsrS
 A9xQMkuEe8/eTVJZmkZ1abL5D/SMehc09k4VAGAiYNTN4roQBJk8wV+aaH91njR+
 1fmQdS8IvGuW8GlQ73CZS0m2fGlqfSWJ8Nj1139XM96Z14/okt52ZVxHUHRZpw+1
 vBF3XJvH3VG/WGHPyg2MlxuktI2k6gjFsUSbhJ15ogGrFV5eX8QVubXdSXzk4L+B
 2DmBNbh/xELHIP04tZCa
 =MvOQ
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-srom-4.6' into next/dt

Device Tree changes for v4.6 adding the nodes for Exynos SROM controller
driver. The driver saves and restores SROM registers during suspend to RAM.
DT changes should go in before removal of SROM support from mach-exynos.
2016-01-25 10:48:07 +09:00
Pavel Fedin
d2deef6c61 ARM: dts: Add SROM to exynos5410
This machine uses own SoC device tree file, add missing part.

Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-25 10:32:07 +09:00
Pankaj Dubey
c3ede5e0a3 ARM: dts: Add SROM device node for exynos5
Add SROM controller device node for exynos5.

CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
[k.kozlowski: fixed size of mapped SROMC memory region]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-25 10:32:07 +09:00
Pankaj Dubey
df4400acde ARM: dts: Add SROM device node for exynos4
Add device node of SROM controller for exynos4.

CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
[k.kozlowski: fixed size of mapped SROMC memory region]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-25 10:32:06 +09:00
Hakjoo Kim
1eca825f5d ARM: dts: Add pinctrl support to exynos5410
Add the required pin configuration support to Exynos5410 using pinctrl
interface.

Signed-off-by: Hakjoo Kim <ruppi.kim@hardkernel.com>
[AF: Rebased, style changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Pavel Fedin <p.fedin@samsung.com>
[k.kozlowski: Move pinctrl nodes into soc node]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-01-25 09:16:55 +09:00
Simon Horman
214e8481fe ARM: dts: r8a7793: use GIC_* defines
Use GIC_* defines for GIC interrupt cells in r8a7793 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-01-25 08:55:00 +09:00
Sergei Shtylyov
84e734f497 ARM: dts: silk: add DU DT support
Define  the SILK board dependent part of the DU device node.
Add the device nodes for the Analog Devices ADV7511W HDMI transmitter
(connected to DU0) and ADV7123  video DAC (connected to DU1). Add the
necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA
connectors.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25 08:55:00 +09:00
Simon Horman
386a929113 ARM: dts: r8a7791: use GIC_* defines
Use GIC_* defines for GIC interrupt cells in r8a7791 device tree.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25 08:55:00 +09:00
Simon Horman
3abb4d5fc3 ARM: dts: r8a7790: use GIC_* defines
Use GIC_* defines for GIC interrupt cells in r8a7791 device tree.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25 08:55:00 +09:00
Simon Horman
f6890af3ad ARM: dts: gose: add i2c2 bus to device tree
Activate i2c2 bus in r8a7793/gose device tree.

Based on similar work for the r8a7791/koelsch by Wolfram Sang.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25 08:55:00 +09:00
Simon Horman
cefe5a56d3 ARM: dts: r8a7793: move dmac nodes
Move dmac nodes in the r8a7793 device tree to match their location
in the r8a7791 device tree to aid comparison between the device
trees of these similar SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25 08:55:00 +09:00
Simon Horman
1472ffa81a ARM: dts: r8a7794: use fallback usbhs compatibility string
Use recently added fallback compatibility string in r8a7794 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-01-25 08:55:00 +09:00
Simon Horman
8cf1d454b2 ARM: dts: r8a7791: use fallback usbhs compatibility string
Use recently added fallback compatibility string in r8a7791 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-01-25 08:55:00 +09:00
Simon Horman
d87ec94aee ARM: dts: r8a7790: use fallback usbhs compatibility string
Use recently added fallback compatibility string in r8a7790 device tree.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-01-25 08:55:00 +09:00
Simon Horman
6b78e6ae68 ARM: dts: alt: Add QSPI device to DT
Enable the QSPI controller in the alt device tree.

Based similar work for the silk board by by Vladimir Barinov and
Sergei Shtylyov.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-01-25 08:55:00 +09:00
Laurent Pinchart
7aed17f445 ARM: dts: r8a7793: Add I2C master nodes to DT
Instantiate all the 9 I2C controllers in the disabled state.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25 08:55:00 +09:00
Sergei Shtylyov
c5af8a4248 ARM: dts: porter: add DU DT support
Define  the Porter board dependent part of the DU device node.
Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
and HDMI devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25 08:55:00 +09:00
Simon Horman
3b18d8593d ARM: dts: gose: Add GPIO leds to DT
Instantiate the GPIO leds in the gose device tree.

Based on similar work for the koelsch board by Magnus Damm.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Magnus Damm <damm+renesas@opensource.se>
2016-01-25 08:55:00 +09:00
Simon Horman
d7d5974b15 ARM: dts: gose: Add GPIO keys to DT
Instantiate the GPIO keys in the gose device tree.

Based on similar work for the koelsch board by Laurent Pinchart.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Magnus Damm <damm+renesas@opensource.se>
2016-01-25 08:55:00 +09:00
Geert Uytterhoeven
406663ed61 ARM: shmobile: defconfig: Do not enable CONFIG_CPU_BPREDICT_DISABLE
Do not disable branch prediction, as this has a big performance impact.

After re-enabling branch prediction, __loop_delay() runs 16 (Cortex A15)
or 11 (Cortex A9) times faster than before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25 08:47:11 +09:00
Geert Uytterhoeven
e2102cea9b arm64: dts: r8a7795: Complete SYS-DMAC nodes
Complete the dma-controller nodes for SYS-DMAC 0 to 2.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-25 08:43:32 +09:00
Chen-Yu Tsai
8826532c76 ARM: dts: sun9i: cubieboard4: Enable hardware reset and HS-DDR for eMMC
mmc2 has a special pin for eMMC hardware reset, which is controllable
from the controller. Add the "mmc-cap-hw-reset" property to denote that
this controller supports this function, and the pins are actually used.

Also increase the signal drive strength for mmc2 pins, for HS-DDR mode
support.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Chen-Yu Tsai
02df9cb85e ARM: dts: sun9i: a80-optimus: Enable hardware reset and HS-DDR for eMMC
mmc2 has a special pin for eMMC hardware reset, which is controllable
from the controller. Add the "mmc-cap-hw-reset" property to denote that
this controller supports this function, and the pins are actually used.

Also increase the signal drive strength for mmc2 pins, for HS-DDR mode
support.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Chen-Yu Tsai
675ec62b08 ARM: dts: sun9i: Include SDC2_RST pin in mmc2_8bit_pins
mmc2_8bit_pins is used with eMMC chips, which also have a reset pin.
The MMC controller also has a reset output that is supported.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Chen-Yu Tsai
3b5d8dce4c ARM: dts: sun8i: Include SDC2_RST pin in mmc2_8bit_pins
mmc2_8bit_pins is used with eMMC chips, which also have a reset pin.
The MMC controller also has a reset output that is supported.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Chen-Yu Tsai
9fc1db1b7e ARM: dts: sun6i: sina31s: Switch to mmc3 for onboard eMMC
According to Allwinner, only mmc3 supports 8 bit DDR transfers for eMMC.
Switch to mmc3 for the onboard eMMC, and also assign vqmmc for signal
voltage sensing, and "cap-mmc-hw-reset" to denote this instance can use
eMMC hardware reset.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Chen-Yu Tsai
a22f8b22a9 ARM: dts: sun6i: Add mmc3 pins for 8 bit emmc
mmc2 and mmc3 are available on the same pins, with different mux values.
However, only mmc3 supports 8 bit DDR transfer modes.

Since preference for mmc3 over mmc2 is due to DDR transfer modes, just
set the drive strength to 40mA, which is needed for DDR.

This pinmux setting also includes the hardware reset pin for emmc.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Chen-Yu Tsai
3a95221352 ARM: dts: sun9i: Use sun9i specific mmc compatible
sun9i/A80 MMC controllers have a larger FIFO, and the FIFO DMA
trigger levels can be increased. Also, the mmc module clock parent
has a higher clock rate, and the sample and output delay phases
are different.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Chen-Yu Tsai
74124439b9 ARM: dts: sun8i: sina33: Enable hardware reset and HS-DDR for eMMC
mmc2 has a special pin for eMMC hardware reset, which is controllable
from the controller. Add the "mmc-cap-hw-reset" property to denote that
this controller supports this function, and the pins are actually used.

Also increase the signal drive strength for mmc2 pins, for HS-DDR mode
support.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Maxime Ripard
db30fce1ee ARM: sun5i: chip: Add CPU regulator for cpufreq
The current DT doesn't have a phandle to the CPU regulator in the CPU node,
which disables the CPU voltage scaling entirely.

Add that phandle.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Chen-Yu Tsai
ac6e4349b3 ARM: dts: sun8i: Add device tree for Cubietruck Plus
Cubietruck Plus is a A83T/H8 based development board. The board has
standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host
via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet,
WiFi, headphone out / mic in, and various GPIO headers.

The board also has an EEPROM on i2c0 which holds the MAC address.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Chen-Yu Tsai
b1dc902fda ARM: dts: sun8i: Add watchdog device node for A83T
The A83T, like previous Allwinner SoCs, has a watchdog as part of its
timer block. Add a device node for it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Vishnu Patekar
85c19acf57 ARM: dts: sun8i: Enable timer node for A83T
A83T timer is compatible with that of earlier SOCs.
Just add timer node to enable and re-use it.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Vishnu Patekar
b9c34584d7 ARM: dts: sun8i: Add A83T HomletV2 Board by Allwinner
H8Homlet Proto v2.0 Board is A83T Dev Board by Allwinner.
It has UART, ethernet, USB, HDMI, etc ports on it.

A83T patches are tested on this board.
It has UART, ethernet, USB, HDMI, etc ports on it.

For FEL mode it needs USB A-A(Male) cable. I used uart0 which
is multiplexed to microsd pins PF2 and PF4.

Enabled UART0 Header(PB9, PB10 pins).

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Vishnu Patekar
7c929aa6e3 ARM: dts: sun8i: Add Allwinner A83T dtsi
Allwinner A83T is new octa-core cortex-a7 SOC.
This adds the basic dtsi, the clocks differs from
earlier sun8i SOCs.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
[Maxime: Removed empty chosen node]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Hans de Goede
1b4dcd01f7 ARM: dts: sun4i: Add touchscreen node to inet97fv2 dts file
Add a node describing the focaltech ft5306de4 touchscreen found on
inet97fv2 tablets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Hans de Goede
75313a075e ARM: dts: sun4i: Add touchscreen node to chuwi-v7 dts file
Add a node describing the focaltech ft5306de4 touchscreen found on
chuwi-v7-cw0825 tablets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Hans de Goede
925c87109b ARM: dts: sun4i: Add touchscreen node to inet9f-rev03 tablet dts file
Add a node describing the focaltech ft5406ee8 touchscreen found on
inet-9f-rev03 / qware qw tb-g100 tablets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 00:01:21 +01:00
Andre Przywara
ce3dd55b99 arm64: Introduce Allwinner SoC config option
To prepare for supporting the Allwinner A64 SoC, introduce a config
option to allow compiling Allwinner (aka. sunxi) specific drivers
for ARM64.
This patch just defines the ARCH_SUNXI symbol to allow Allwinner
specific drivers to be selected during kernel configuration.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-24 23:59:26 +01:00
Caesar Wang
c840f28bbf arm64: Enable the timer on Rockchip architecture
On the RK3368 SoC, support the APB timers for rockchip platform.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-24 23:33:14 +01:00
Sjoerd Simons
30c4cbcd48 ARM: dts: rockchip: Add the iodomains for the Rock2 SOM
Add the IO domain configuration for the Rock2 SOM and model the fixed
regulator used as the vqmmc for the EMMC device.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-24 23:28:23 +01:00
Chris Zhong
cab6f070ab ARM: dts: rockchip: add rk3288 mipi_dsi nodes
Add a mipi_dsi node, and also add mipi_dsi endpoints to vopb and vopl
output port nodes.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-24 23:28:23 +01:00
Andy Yan
3a4294927a ARM: dts: rockchip: increase vdd_arm voltage for rk3066a based boards
The current vdd_arm voltage is too low, increase it will make
the system more stable.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-24 23:28:23 +01:00
Andy Yan
ac79e0ef41 ARM: dts: rockchip: enable pwm3 as pwm regulator for rk3066a based boards
Rayeager/Bqcurie2/Marsboard use pwm3 modulate the vdd_logic voltage,
so enable it.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-24 23:28:23 +01:00