Commit graph

127,691 commits

Author SHA1 Message Date
Stefan Agner
2afa06cbf1 ARM: dts: vf-colibri: add CAN support
Add Colibri standard pinmux for FlexCAN controller instances. CAN
is not a standard Colibri feature, but the datasheet predefines
pins which provide CAN (compatible across some modules). Hence,
add the pinmux on module level.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:43:38 +08:00
Alexandre Belloni
234f82a702 ARM: mxs: dt: cfa10057: fix backlight PWM
The backlight PWM is actually pwm4.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:43:38 +08:00
Lucas Stach
67157882a4 ARM: dts: imx6qdl: move GIC to right location in DT
No functional change, just moving the node to the place where it
belongs according to its unit address.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:43:37 +08:00
Philipp Zabel
41beef39cd ARM: dts: imx6qdl: add IPU aliases
This allows for consistent numbering of the IPU output and
input ports.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:43:37 +08:00
Lucas Stach
d9cf0a125e ARM: dts: imx6: remove config space from PCIe controller ranges property
This has been moved to the reg property where it belongs for quite some
time. The range has been unused by the kernel since then and with kernel
4.4 it's flagged as an unparsable range, as it does not comply to the
PCI ranges DT binding. Fix this by removing the superfluous range.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:43:37 +08:00
Shengjiu Wang
09d3059adc ARM: dts: imx6: Change the clock name for spba clock
Audio IP need the spba clock, but original clock name "dma" is not
accurate, so change it to name "spba". The audio driver has been
using the new name "spba", the binding document has been updated.

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:43:36 +08:00
Meng Yi
edb3ed394b ARM: dts: ls1021a: Add a TFT LCD panel.
Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Signed-off-by: Meng Yi <b56799@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:43:36 +08:00
Meng Yi
ab0087dfc2 ARM: dts: ls1021a: Add DCU dts node.
Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Signed-off-by: Meng Yi <b56799@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:43:36 +08:00
Bai Ping
698e2ac536 ARM: dts: imx: modify the clocks used by cpufreq driver
As on i.MX7D, we using a virtual arm clk for CPU frequency
scaling, so correct the clocks info used by the cpufreq driver.

Signed-off-by: Bai Ping <b51503@freescale.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:43:36 +08:00
Tim Harvey
3edf253c5d ARM: dts: imx: ventana: Add SPI support for GW52xx
This addes support for SPI available on an off-board connector available on
some models of the GW52xx.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:25 +08:00
Tim Harvey
aa2b21783b ARM: dts: imx: ventana: add PWM nodes for Ventana boards
Ventana boards have an off-board connector with signals that can be pinmuxed
as either GPIO or PWM. This patch adds pwm device-tree nodes in the disabled
state which the bootloader can decide to enable based on bootloader config.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:25 +08:00
Afzal Mohammed
058c0c1a44 ARM: dts: vf6xx: Cosmic+: M4(nommu) initial support
Minimal Cortex-M4 device tree to boot Linux to shell. M4 is booted via
Cortex-A5 running Linux using Stefan Agner's <stefan@agner.ch> "m4boot"
utility.

Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:25 +08:00
Cory Tusar
5f060c71aa ARM: dts: vfxxx: Include support for dspi[23] functionality.
Extend the existing Vybrid DSPI devicetree implementation to also
describe the dspi2 and dspi3 functional blocks.

Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:24 +08:00
Marc Kleine-Budde
70f97128a1 ARM: dts: imx25: add alias for pwm nodes
This, together with the corresponding patch to pwm-imx.c,  allows to order the
pwm devices correctly.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:24 +08:00
Markus Pargmann
c1b99dedfd ARM: dts: imx6dl: Fix gpt compatibles, remove imx6q-gpt
imx6qdl.dtsi uses compatibles "fsl,imx6q-gpt", "fsl,imx31-gpt".
imx6dl.dtsi uses compatibles "fsl,imx6dl-gpt", "fsl,imx6q-gpt" since
commit

	4e415ed814 (ARM: dts: imx6dl: add imx6dl gpt specific compatible string)

If imx6dl would be compatible with imx6q-gpt it would also have to be
compatible with imx31-gpt which is currently missing.

Based on the above mentioned patch I assume imx6q-gpt and imx6dl-gpt are
not compatible. So imx6q-gpt should be removed as compatible.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:24 +08:00
Tim Harvey
e726a9fdde ARM: dts: imx: ventana: Allow HDMI and LVDS to work simultaneously
Currently it is not possible to have HDMI and LVDS working simultaneously,
because both ports try to use PLL5.

Move the LVDS clock parent to PLL3_USB_OTG, so that HDMI and LVDS can be
driven from independent sources.

With this change the LDB pixel clock goes to 68.57 MHz, which is still
within the valid range for the displays supported by the Ventana boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:23 +08:00
Tim Harvey
a7668fda6b ARM: dts: imx: ventana: fix GW53xx/GW54xx lvds channel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:23 +08:00
Tim Harvey
70b6b438cc ARM: dts: imx: ventana: GW54xx PMIC swbst reg always-on
The GW54xx PMIC swbst regulator is used for LVDS power, CANbus xceiver
and HDMI DDC and is enabled by the bootloader. Set the regulator to
always-on so that Linux doesn't turn it off thinking its not needed.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:23 +08:00
Uwe Kleine-König
b312e3600d ARM: dts: imx25-pinfunc: add some more pin configurations
This patch adds some values that are needed for an out-of-tree device
tree I'm currently working with.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:22 +08:00
Fabio Estevam
aab8ec0c73 ARM: dts: imx6ul: Add ADC support
Add support for ADC1.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:22 +08:00
Fabio Estevam
eb45ff7469 ARM: dts: imx6sx: Pass the 'adck-max-frequency' property
Specify the 'adck-max-frequency' property in the adc nodes.

According to Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
this is a recommended property.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:42:22 +08:00
Peter Chen
2b1a40e8d1 ARM: dts: imx6: change default burst size for USB
It can improve the USB performance when choosing larger
burst size at some systems (bus size is larger), there is
no side effect if this burst size is larger than bus size.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:41:51 +08:00
Peter Chen
9493bf5458 ARM: dts: imx6: set ahb-burst-config as 0 for USB
After setting ahb burst configuration as 0, we can increase tx/rx
burst size, it will improve the USB performance

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-22 20:41:32 +08:00
Linus Walleij
36f46d6d5c ARM: 8482/1: l2x0: make it possible to disable outer sync from DT
According to commit 2503a5ecd8
"ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore
boards with L220" Some PB11MPCore RealView core tiles have broken
outer_sync.

We got rid of the custom barriers from the machine by disabling
outer sync, but that was just for the boardfile case. We have
to be able to do the same in the device tree case.

Since __l2c_init() is cloning and copying the L2C vtable,
we pass an argument to this function to optionally numb
the outer sync operation if desired, before initializing
the cache.

After this we can set up the cache correctly on the RealView
PB11MPCore. This was tested on a PB11MPCore known to have the
issue. Before this, spurious crashes would occur if we try to
set up the cache properly, after this it boots rock solid.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-22 12:15:53 +00:00
Marc Zyngier
e7273ff49a ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI
Having IPI_CPU_BACKTRACE as SGI15 may not work if the kernel is
running in non-secure mode and that the secure firmware has
decided to follow ARM's recommendations that SGI8-15 should
be reserved for secure purpose.

Now that we are "only" using SGI0-6, change IPI_CPU_BACKTRACE
to use SGI7, which makes it more likely to work.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-22 12:09:44 +00:00
Marc Zyngier
89d798b73d ARM: 8487/1: Remove IPI_CALL_FUNC_SINGLE
Since 9a46ad6d6d ("smp: make smp_call_function_many() use logic
similar to smp_call_function_single()"), the core IPI handling
has been simplified, and generic_smp_call_function_interrupt is
now the same as generic_smp_call_function_single_interrupt.

This means that one of IPI_CALL_FUNC and IPI_CALL_FUNC_SINGLE has
become redundant. We can then safely drop IPI_CALL_FUNC_SINGLE,
and use only IPI_CALL_FUNC.

This has the advantage of reducing the number of SGI IDs we're using
(a fairly scarse resource).

Tested on a dual A7 board.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-22 12:09:43 +00:00
Lorenzo Pieralisi
f6419f240b ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hook
The suspend() hook in the cpuidle_ops struct is always called on
the cpu entering idle, which means that the cpu parameter passed
to the suspend hook always corresponds to the local cpu, making
it somewhat redundant.

This patch removes the logical cpu parameter from the ARM
cpuidle_ops.suspend hook and updates all the existing kernel
implementations to reflect this change.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lina Iyer <lina.iyer@linaro.org>
Tested-by: Lina Iyer <lina.iyer@linaro.org>
Tested-by: Jisheng Zhang <jszhang@marvell.com> [psci]
Cc: Lina Iyer <lina.iyer@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-22 12:09:43 +00:00
Qais Yousef
2a037f310b MIPS: VDSO: Fix build error
Commit ebb5e78cc6 ("MIPS: Initial implementation of a VDSO") introduced a
build error.

For MIPS VDSO to be compiled it requires binutils version 2.25 or above but
the check in the Makefile had inverted logic causing it to be compiled in if
binutils is below 2.25.

This fixes the following compilation error:

CC      arch/mips/vdso/gettimeofday.o
/tmp/ccsExcUd.s: Assembler messages:
/tmp/ccsExcUd.s:62: Error: can't resolve `_start' {*UND* section} - `L0' {.text section}
/tmp/ccsExcUd.s:467: Error: can't resolve `_start' {*UND* section} - `L0' {.text section}
make[2]: *** [arch/mips/vdso/gettimeofday.o] Error 1
make[1]: *** [arch/mips/vdso] Error 2
make: *** [arch/mips] Error 2

[ralf@linux-mips: Fixed Sergei's complaint on the formatting of the
cited commit and generally reformatted the log message.]

Signed-off-by: Qais Yousef <qais.yousef@imgtec.com>
Cc: alex@alex-smith.me.uk
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11745/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-12-22 12:23:31 +01:00
Paul Burton
f3575e230c MIPS: CPS: drop .set mips64r2 directives
Commit 977e043d5e ("MIPS: kernel: cps-vec: Replace mips32r2 ISA level
with mips64r2") leads to .set mips64r2 directives being present in 32
bit (ie. CONFIG_32BIT=y) kernels. This is incorrect & leads to MIPS64
instructions being emitted by the assembler when expanding
pseudo-instructions. For example the "move" instruction can legitimately
be expanded to a "daddu". This causes problems when the kernel is run on
a MIPS32 CPU, as CONFIG_32BIT kernels of course often are...

Fix this by dropping the .set <ISA> directives entirely now that Kconfig
should be ensuring that kernels including this code are built with a
suitable -march= compiler flag.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: <stable@vger.kernel.org> # 3.16+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10869/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-12-22 12:16:32 +01:00
James Hogan
d6a428fb58 MIPS: uaccess: Take EVA into account in [__]clear_user
__clear_user() (and clear_user() which uses it), always access the user
mode address space, which results in EVA store instructions when EVA is
enabled even if the current user address limit is KERNEL_DS.

Fix this by adding a new symbol __bzero_kernel for the normal kernel
address space bzero in EVA mode, and call that from __clear_user() if
eva_kernel_access().

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10844/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-12-22 11:58:43 +01:00
James Hogan
6f06a2c45d MIPS: uaccess: Take EVA into account in __copy_from_user()
When EVA is in use, __copy_from_user() was unconditionally using the EVA
instructions to read the user address space, however this can also be
used for kernel access. If the address isn't a valid user address it
will cause an address error or TLB exception, and if it is then user
memory may be read instead of kernel memory.

For example in the following stack trace from Linux v3.10 (changes since
then will prevent this particular one still happening) kernel_sendmsg()
set the user address limit to KERNEL_DS, and tcp_sendmsg() goes on to
use __copy_from_user() with a kernel address in KSeg0.

[<8002d434>] __copy_fromuser_common+0x10c/0x254
[<805710e0>] tcp_sendmsg+0x5f4/0xf00
[<804e8e3c>] sock_sendmsg+0x78/0xa0
[<804e8f28>] kernel_sendmsg+0x24/0x38
[<804ee0f8>] sock_no_sendpage+0x70/0x7c
[<8017c820>] pipe_to_sendpage+0x80/0x98
[<8017c6b0>] splice_from_pipe_feed+0xa8/0x198
[<8017cc54>] __splice_from_pipe+0x4c/0x8c
[<8017e844>] splice_from_pipe+0x58/0x78
[<8017e884>] generic_splice_sendpage+0x20/0x2c
[<8017d690>] do_splice_from+0xb4/0x110
[<8017d710>] direct_splice_actor+0x24/0x30
[<8017d394>] splice_direct_to_actor+0xd8/0x208
[<8017d51c>] do_splice_direct+0x58/0x7c
[<8014eaf4>] do_sendfile+0x1dc/0x39c
[<8014f82c>] SyS_sendfile+0x90/0xf8

Add the eva_kernel_access() check in __copy_from_user() like the one in
copy_from_user().

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10843/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-12-22 11:55:24 +01:00
James Hogan
5dc62fdd83 MIPS: uaccess: Fix strlen_user with EVA
The strlen_user() function calls __strlen_kernel_asm in both branches of
the eva_kernel_access() conditional. For EVA it should be calling
__strlen_user_eva for user accesses, otherwise it will load from the
kernel address space instead of the user address space, and the access
checking will likely be ineffective at preventing it due to EVA's
overlapping user and kernel address spaces.

This was found after extending the test_user_copy module to cover user
string access functions, which gave the following error with EVA:

test_user_copy: illegal strlen_user passed

Fortunately the use of strlen_user() has been all but eradicated from
the mainline kernel, so only out of tree modules could be affected.

Fixes: e3a9b07a9c ("MIPS: asm: uaccess: Add EVA support for str*_user operations")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15.x-
Patchwork: https://patchwork.linux-mips.org/patch/10842/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-12-22 11:54:13 +01:00
Songjun Wu
ca6349a8c5 ARM: at91/dt: sama5d2 Xplained: add pdmic node
Add pdmic node on sama5d2-xplained board.The pdmic
pins conflict with ISC_D0 & ISC_D1 data pins.

Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-22 10:37:53 +01:00
Songjun Wu
70450d4d58 ARM: at91/dt: sama5d2: add pdmic node
Add pdmic node.

Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-22 10:37:30 +01:00
Olof Johansson
a67c7129d4 Defconfig (exynos and multi_v7) changes for Exynos based boards for 4.5:
1. Enable Maxim 8997 and 77693 family drivers (charger, extcon, LED,
    RTC, haptic/motor, regulator).
 2. Build ChromeOS EC drivers as modules on multi_v7.
 3. Enable drivers important for Exynos4210-based Universal C210 board.
 4. Enable NFSv4 client.
 5. On exynos_defconfig set some options to a value recommended
    by systemd. This also makes it more consistent with multi_v7.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWXkcyAAoJEME3ZuaGi4PXktAP/A+KSG03XL7ltm0o0qlSUIbv
 sag2traI0icbyur/8T4DqBe9m5Gq/4ouG0sBOoB4r7cs80zjzxtsr7VO61YGZHSo
 pAIPn020K4y9uBm6uBs+mIbshoC5g7BxJB9/sYy28tDz9iK5DNPMu1d8Q08YLNT8
 xfIfyLz4mP1wH/WvWhKpV5fnTX4DJr4wbixdH4jEAsz6ity4sWDLuLus/dibkdFU
 4jIa4Fr40o+T463svIagGd5+eUv5SjOEzXfhfYty1CQIRbdqnLkasIIkTdBcn6RO
 hMyvw1DJ5QBxD61I2hE1L66OmphdH0clTreER7H9/tfTP4YftIhUlUP0pjAq5Nle
 ckD2RsvMz364WZ+iwsqUXu8EbM8HLRAzO7VHOd2pi+zlpWGtc67l5v/QqCi4oSZX
 Lnlep17YaMit9ufeJSaf7aO5PRmGDSKX2lSSlWQ0VM7WVFRuHLVXxGSq2itIsH6P
 +7OGHwbEH7wyhf11XsYAh+goTvLWtQlGeeJaVyq4NrG6oHvzc2HEWN1Gezvwx0HB
 Tj7thncWBEy8rkC1DCU6qxnC0FZiWAufcU90onjBYunjEEU6cCPMTPj1GG1Vb1fQ
 73rkYJYnp7z8W39wSdcAafpqy+EZgOlWRk6mv32/txjnGBlOWkUpiLERTEhS0eUH
 xiEYg17LeNYcqMuDYnpX
 =ANuN
 -----END PGP SIGNATURE-----

Merge tag 'samsung-defconfig-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig

Defconfig (exynos and multi_v7) changes for Exynos based boards for 4.5:
1. Enable Maxim 8997 and 77693 family drivers (charger, extcon, LED,
   RTC, haptic/motor, regulator).
2. Build ChromeOS EC drivers as modules on multi_v7.
3. Enable drivers important for Exynos4210-based Universal C210 board.
4. Enable NFSv4 client.
5. On exynos_defconfig set some options to a value recommended
   by systemd. This also makes it more consistent with multi_v7.

* tag 'samsung-defconfig-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: exynos_defconfig: Set recommended options for systemd
  ARM: exynos_defconfig: Enable NFSv4 client
  ARM: exynos_defconfig: Add drivers for Exynos4210 Universal C210 board
  ARM: multi_v7_defconfig: Build ChromeOS EC drivers as modules
  ARM: multi_v7_defconfig: Enable Maxim 77693 LED and haptic drivers
  ARM: multi_v7_defconfig: Enable Maxim 8997 family drivers
  ARM: exynos_defconfig: Enable Maxim 77693 LED and haptic drivers
  ARM: exynos_defconfig: Enable Maxim 8997 family drivers

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-21 20:56:33 -08:00
Olof Johansson
ea83c68ba8 Samsung DeviceTree ARM64 updates and improvements for 4.5:
1. Add S2MPS15 PMIC node to Espresso board. This gives proper
    control over regulators, provides 32KHz clocks and RTC driver.
 2. Enable HS200 mode operation on Espresso board for MMC0.
 3. Add reboot capability (generic syscon-reboot).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWXkVOAAoJEME3ZuaGi4PX1yIP+wR8B2CHEyMjivlP5hhMvyl+
 Brmk2Y0FnY1/vb9lK0myXgMXVS+lpEg5HEZDgvE1jHYour+RcpbNuMudS+ZT5AwF
 K1akZ1IhIKbAyvzp/T5ah9LlaiRib4sjPqJnDIeVq837TmTcCBrFFy5By8GCj3wH
 i/zpx3Am8NTlW6q5BskyB3mzQNydJa8OgSW7gMkzNWrONdKN0uJZD6UTrL9tgci8
 yYfzCmft0JOKsulFZo84KSUgI6TyOazaj5+VQEMqXFAC0IIJ4a1wRauCyaOu+0Qm
 EvWssLKssE3U6N5NQec0npIt3YL6JDKOZJ/erA776tcGDWSZeKlIYn4rxfcv6Ce+
 X6bNfZ5w1JIgUNnRxYJ9eCAAF3Hq/GrUdHjmYH+FPCwUnA1T+O+hfR7HrgxMn6aA
 a9xfptpxmpC0A0MZJbKTV3OnDnOTNbYFtv9CNo1sRT9qrNzuwjo891Mtskf1i44s
 kG/BT4gDAKyUb/skybLumtnSkzYdqWsLZACO9e7I7ylrf2j9maE2ZNID4g88GEd0
 9NzHHk+TB6FHI0/uvnMLvX3ufCHwNgHQoR2NxH0FRsw386qMIUZR0JBCesowVlEb
 B2Yxsx40L1cNHPRyHK+xCFj4IELsguuWVbx21XzE7G/37PENoffvMiHh+xB+O0Sd
 AhxbMaSiUF98ZnPTrVCt
 =MFYu
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt64-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Samsung DeviceTree ARM64 updates and improvements for 4.5:
1. Add S2MPS15 PMIC node to Espresso board. This gives proper
   control over regulators, provides 32KHz clocks and RTC driver.
2. Enable HS200 mode operation on Espresso board for MMC0.
3. Add reboot capability (generic syscon-reboot).

* tag 'samsung-dt64-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: Add reboot node for exynos7
  arm64: dts: Enable HS200 mode operation on exynos7-espresso
  arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-21 20:52:46 -08:00
Olof Johansson
d622bbfcae Samsung Exynos improvements for 4.5:
1. Switch from Exynos-specific restart/poweroff handler
    (mach-exynos/pmu.c) to generic syscon-reboot and syscon-poweroff
    drivers.
    This depends on adding syscon nodes to DTS to preserve
    bisectability.
 2. Minor improvements.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWXj9IAAoJEME3ZuaGi4PXgzcP/jjZSZaYFk31/PTtdpOlV0je
 kOAAZByLdStEr1rxY89o/YtznaqYowbFrElJPVwHr4W9y0UyP+FjIWFCBNh7vn29
 cVRlJUAg99dVP8cohrgbc1Gd6943CeR/0S3EPYAOK6SffRuoDNWvgtGg4Y9mV/7Z
 3g1FeuCIxaKisCWFmRYNw3cjnekLgeL1AC+N6IjPiX1iy2Wnx58zTeFPL0cAhpHY
 YjG4S6hVzaWFt969hR7cqhuG6a05wmSWTDKVk4PBuCkZpoX/k2lRwy0saT6WFzjc
 8MoNVgqGTqlgeYXDIQcR3upmS2NSp2IPXxjcT9I7qP8gnHX1fgb9hdYWdj9+uaKh
 7uF4JM2xlGXeMja9t1TcIBCMTc9rKPd0dxPHm4MnIYgC9BxGi5iBkvoGEH5zxoeg
 P0pAeIxkk11q+d59b2AMZF4EMUkuZh6iLZPrwUh5JWs0rdo+sh+wdDiQ0GYdvtev
 eW51mfWIuhFfwRCafYM9KL+GAf+fn+vKecYe7KFmNbLhXYSUMtmiffXVjFFhuFy7
 mW8iOEPfrxP2sqAsuElrl5c82klxvXJgLQ51hCthHeugrP/tJsYyLffIcLMhlFZL
 t8yKIeTnjytfiE8OsrHMUiDNd62bmiRyAU7vl9twlQLYU1LcYJ+tITq+mrxFfAY0
 DpUn13WehOA7qSYWy9zm
 =JWjG
 -----END PGP SIGNATURE-----

Merge tag 'samsung-soc-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Samsung Exynos improvements for 4.5:
1. Switch from Exynos-specific restart/poweroff handler
   (mach-exynos/pmu.c) to generic syscon-reboot and syscon-poweroff
   drivers.
   This depends on adding syscon nodes to DTS to preserve
   bisectability.
2. Minor improvements.

* tag 'samsung-soc-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: EXYNOS: Remove redundant code from regs-pmu.h
  ARM: EXYNOS: Constify local exynos_pmu_data structure
  ARM: EXYNOS: Switch to syscon reboot and poweroff
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5410
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos4
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos3250

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-21 20:42:30 -08:00
Olof Johansson
3a8659772c Device Tree changes adding necessary nodes for syscon reboot/poweroff
handlers on Exynos boards. The mach-exynos changes must base on top
 of this to retain the bisectability of not loosing reboot/poweroff
 features.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWTsTCAAoJEME3ZuaGi4PXFh0P/0nbYXs89Y9guNwDJwlXKrlo
 kfgbZWmsrvbyMp0mTxwF9u2YwEKWycVrgBG5AnT4xaumF+cJoDSGSPb9mRDhNEfl
 9yOb6c+18TyWa7Kwu4Zya2RzOWEMMHorZgcwBBbPqw4pIMF/Oj92Dnl7OuZ19D5m
 DItDAPasw/Q8Kx3N5kksobvOzYbiGT3otG7wnL8xEL13ovTnSx3qB0rkDS4LVYRP
 xLQI8jYzj377B3T0iob0XhbT25CjsGT6B6IwLbrPHG3wkaBMLDlvWyAHtnGFHKX6
 2qSLce8qAJhTCoYqPcBWX4UzddMAY0r0l2AFTmfTQjyLZKGhmex3OvwTZEl/amO4
 t8QE7FrUiGDBzrMQaTPre9xhKyoNeeeSS+OAa3NJT/kpTi70kqC9Vig32xQ7J2PD
 42AuMwHxgUqtDJ2135is0bkutXXfnRTtotICaKPd9j9HNrgwRQ+ffg+jgyuOJmiC
 wsQCCSDhJQ3H3bH/1o8aQmAVvHXyniE5FY+1hFHUhPRmvenceAjLKX2tIc8Wqasu
 W1FKJAYalM4TdXcgmQy56EnXEK+VbIVhNmvnnNUp8+CfpTWS9bMwrH/TlbpDwTkK
 pSC8A6Dols0HgaKzdLbWM0L03mYuWvZ/JO6wW1Y11chPYw234+ph7ez4MBrHLTTF
 QTOPTffhLOcGVBLuFPoi
 =/NF/
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-syscon-restart-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Device Tree changes adding necessary nodes for syscon reboot/poweroff
handlers on Exynos boards. The mach-exynos changes must base on top
of this to retain the bisectability of not loosing reboot/poweroff
features.

* tag 'samsung-dt-syscon-restart-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5410
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos4
  ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos3250

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-21 20:39:19 -08:00
Masahiro Yamada
e1a0ebc8d8 arm64: dts: uniphier: add PH1-LD10 SoC/board support
This is the first ARMv8 SoC from Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-21 20:38:24 -08:00
Greg Kroah-Hartman
bfccd95e7a Merge 4.4-rc6 into usb-next
We want the USB and PHY fixes in here as well to make things easier for
testing and development.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-21 11:11:12 -08:00
Adam Ford
6c95771f8c ARM: OMAP2+: LogicPD Torpedo: Add Touchscreen Support
The development kit uses a TSC2004 chip attached to I2C3.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-21 11:10:40 -08:00
Will Deacon
c9cd0ed925 arm64: traps: address fallout from printk -> pr_* conversion
Commit ac7b406c1a ("arm64: Use pr_* instead of printk") was a fairly
mindless s/printk/pr_*/ change driven by a complaint from checkpatch.

As is usual with such changes, this has led to some odd behaviour on
arm64:

  * syslog now picks up the "pr_emerg" line from dump_backtrace, but not
    the actual trace, which leads to a bunch of "kernel:Call trace:"
    lines in the log

  * __{pte,pmd,pgd}_error print at KERN_CRIT, as opposed to KERN_ERR
    which is used by other architectures.

This patch restores the original printk behaviour for dump_backtrace
and downgrade the pgtable error macros to KERN_ERR.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-12-21 17:26:02 +00:00
AKASHI Takahiro
20380bb390 arm64: ftrace: fix a stack tracer's output under function graph tracer
Function graph tracer modifies a return address (LR) in a stack frame
to hook a function return. This will result in many useless entries
(return_to_handler) showing up in
 a) a stack tracer's output
 b) perf call graph (with perf record -g)
 c) dump_backtrace (at panic et al.)

For example, in case of a),
  $ echo function_graph > /sys/kernel/debug/tracing/current_tracer
  $ echo 1 > /proc/sys/kernel/stack_trace_enabled
  $ cat /sys/kernel/debug/tracing/stack_trace
        Depth    Size   Location    (54 entries)
        -----    ----   --------
  0)     4504      16   gic_raise_softirq+0x28/0x150
  1)     4488      80   smp_cross_call+0x38/0xb8
  2)     4408      48   return_to_handler+0x0/0x40
  3)     4360      32   return_to_handler+0x0/0x40
  ...

In case of b),
  $ echo function_graph > /sys/kernel/debug/tracing/current_tracer
  $ perf record -e mem:XXX:x -ag -- sleep 10
  $ perf report
                  ...
                  |          |          |--0.22%-- 0x550f8
                  |          |          |          0x10888
                  |          |          |          el0_svc_naked
                  |          |          |          sys_openat
                  |          |          |          return_to_handler
                  |          |          |          return_to_handler
                  ...

In case of c),
  $ echo function_graph > /sys/kernel/debug/tracing/current_tracer
  $ echo c > /proc/sysrq-trigger
  ...
  Call trace:
  [<ffffffc00044d3ac>] sysrq_handle_crash+0x24/0x30
  [<ffffffc000092250>] return_to_handler+0x0/0x40
  [<ffffffc000092250>] return_to_handler+0x0/0x40
  ...

This patch replaces such entries with real addresses preserved in
current->ret_stack[] at unwind_frame(). This way, we can cover all
the cases.

Reviewed-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
[will: fixed minor context changes conflicting with irq stack bits]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-12-21 17:26:02 +00:00
AKASHI Takahiro
fe13f95b72 arm64: pass a task parameter to unwind_frame()
Function graph tracer modifies a return address (LR) in a stack frame
to hook a function's return. This will result in many useless entries
(return_to_handler) showing up in a call stack list.
We will fix this problem in a later patch ("arm64: ftrace: fix a stack
tracer's output under function graph tracer"). But since real return
addresses are saved in ret_stack[] array in struct task_struct,
unwind functions need to be notified of, in addition to a stack pointer
address, which task is being traced in order to find out real return
addresses.

This patch extends unwind functions' interfaces by adding an extra
argument of a pointer to task_struct.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-12-21 17:26:01 +00:00
AKASHI Takahiro
79fdee9b63 arm64: ftrace: modify a stack frame in a safe way
Function graph tracer modifies a return address (LR) in a stack frame by
calling ftrace_prepare_return() in a traced function's function prologue.
The current code does this modification before preserving an original
address at ftrace_push_return_trace() and there is always a small window
of inconsistency when an interrupt occurs.

This doesn't matter, as far as an interrupt stack is introduced, because
stack tracer won't be invoked in an interrupt context. But it would be
better to proactively minimize such a window by moving the LR modification
after ftrace_push_return_trace().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-12-21 17:26:01 +00:00
James Morse
d224a69e3d arm64: remove irq_count and do_softirq_own_stack()
sysrq_handle_reboot() re-enables interrupts while on the irq stack. The
irq_stack implementation wrongly assumed this would only ever happen
via the softirq path, allowing it to update irq_count late, in
do_softirq_own_stack().

This means if an irq occurs in sysrq_handle_reboot(), during
emergency_restart() the stack will be corrupted, as irq_count wasn't
updated.

Lose the optimisation, and instead of moving the adding/subtracting of
irq_count into irq_stack_entry/irq_stack_exit, remove it, and compare
sp_el0 (struct thread_info) with sp & ~(THREAD_SIZE - 1). This tells us
if we are on a task stack, if so, we can safely switch to the irq stack.
Finally, remove do_softirq_own_stack(), we don't need it anymore.

Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
[will: use get_thread_info macro]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-12-21 17:26:01 +00:00
David Woods
66b3923a1a arm64: hugetlb: add support for PTE contiguous bit
The arm64 MMU supports a Contiguous bit which is a hint that the TTE
is one of a set of contiguous entries which can be cached in a single
TLB entry.  Supporting this bit adds new intermediate huge page sizes.

The set of huge page sizes available depends on the base page size.
Without using contiguous pages the huge page sizes are as follows.

 4KB:   2MB  1GB
64KB: 512MB

With a 4KB granule, the contiguous bit groups together sets of 16 pages
and with a 64KB granule it groups sets of 32 pages.  This enables two new
huge page sizes in each case, so that the full set of available sizes
is as follows.

 4KB:  64KB   2MB  32MB  1GB
64KB:   2MB 512MB  16GB

If a 16KB granule is used then the contiguous bit groups 128 pages
at the PTE level and 32 pages at the PMD level.

If the base page size is set to 64KB then 2MB pages are enabled by
default.  It is possible in the future to make 2MB the default huge
page size for both 4KB and 64KB granules.

Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Reviewed-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: David Woods <dwoods@ezchip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-12-21 17:26:00 +00:00
Hans de Goede
12ec938403 ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet
The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet,
featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack.

Empire Electronix is written on the back of the tablet, the D709 model
info can be found in the about tablet menu in android.

The PCB has no markings to speak of.

This dts file does not add support for the ft5x touchscreen found at
i2c bus 1, addr 0x38, irq PG11, because it does not work out of the box.
It seems it has been flashed with the wrong firmware and needs to have
alternative firmware uploaded at boot to make the touchscreen work
properly, when hot-booting from android into an upstream kernel the
touchscreen does work.

The Memsic MXC622X accelerometer at i2c bus 1, addr 0x15 also is not
enabled as there is no driver for it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-21 17:10:18 +01:00
Hans de Goede
b3a9995e58 ARM: dts: sun7i: Enable gmac on Wits Pro A20 DKT
The Wits Pro A20 DKT has a gbit ethernet port, enable it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-21 17:08:36 +01:00
Marcus Cooper
8661d0c34e ARM: dt: sun7i: Enable audio codec on MK808C
This commit enables the on-chip audio codec present on the MK808C.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-21 17:05:06 +01:00