Commit graph

127,691 commits

Author SHA1 Message Date
Russell King
ce9981bd63 ARM: dts: enable GPU for SolidRun's Cubox
Enable the GPU for SolidRun's Cubox.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-15 17:46:34 +01:00
Russell King
6c72d8ab26 ARM: dts: dove: add DT GPU support
Add DT support for the Vivante GC600 GPU on Marvell Dove platforms.
These nodes default to being disabled unless a platform decides they
should be enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-15 17:46:16 +01:00
Alison Wang
b02ec7658c ARM: multi_v7_defconfig: Enable some drivers for LS1021A
This patch enables some drivers for LS1021A, such as
GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM.
QorIQ Clock Framework and Ramdisk support is also enabled.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-15 17:46:01 +01:00
Arnd Bergmann
e9293d92be mvebu defconfig for 4.5 (part 2)
- Reenable DSA in mvebu_v5_defconfig
 - Update multi_v5_defconfig after adding Orion5x to multiarch
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlZq2NAACgkQCwYYjhRyO9Xu3gCeMhnGk15fEWF8WNkCpxPLJgxy
 gwcAoILSSQ2ByCvbL8h0DMwdOE16B2r/
 =/oQV
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-defconfig-4.5-2' of git://git.infradead.org/linux-mvebu into next/defconfig

Merge "mvebu defconfig for 4.5 (part 2)" from Gregory CLEMENT:

- Reenable DSA in mvebu_v5_defconfig
- Update multi_v5_defconfig after adding Orion5x to multiarch

* tag 'mvebu-defconfig-4.5-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: update v5 defconfig for Orion5x machines
  ARM: mvebu: Reenable DSA in mvebu_v5_defconfig
  ARM: config: Add orion5x to multi_v5_defconfig
  ARM: config: Reenable DSA in multi_v5_defconfig
  ARM: config: Regenerate multi_v5_defconfig
2015-12-15 17:44:49 +01:00
Arnd Bergmann
1741c73579 Allwinner defconfig changes for 4.5
A bunch of patches to enable new drivers related to Allwinner SoCs.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWbrDuAAoJEBx+YmzsjxAgTdoP+QFrx/IEge9ipLDe2wQ3jbiz
 4Qn2JkkbwBDALXUMAjHEKXx5xknbq38x/iUnYkZsZCw7RaijxCirvjzSW/6EozCu
 aRnmNLakSNdG7H8erVhOYEDFOpaXnv+v5OJ8PI8mW7+NDBRhQ1o/GCn7C/Yb2K3K
 A/1mUtbH6pT53yU2qzXj0Ez+MtRGMrWyod2gePSwR7NlNr7pVXQDPkeMA09HV37J
 HkTHsa5bU59ou96MN+wZLI8eTT6L7PIU64FX89f5C4V4vLvPe4roBXmzm6Ii47up
 lbJX2HJP01ruz/aJdb6rUrB7jRqpi9//E6RrkmWy8u5QX/WGJbeVY6SfFivSu/gM
 5SLit995SX1SmVk7z4VVEK9gxlzklO1lyjzxa/m2t3a1lk1Cb2G9ImV8nD6vesvu
 wUDCLc4cfdAc+HK9DnGsQEp2T4Q+UltsXYstsEds0Ui3fRXWTrehkbDSPS0mg6Hu
 ExJfhrVpsB4LtuwOl1DWnBEC+E+eJ0xggMFSBvfA5HJynlQx4nuRHOAuvR0ovBY9
 oPd7JW8LHJnAfv1txZlUKdItZ/GCVAvfv1zUgXgoJIzaAA/5wFdJZidBGwI1yj9h
 TgylqmoiIxMMue7FgtEUS/mf2zSmkNgcKevARoe7ubPwAPWYu70DOjWXDPjVsw1B
 7kiPahxBKCi1Vezr+z12
 =eVFZ
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-defconfig-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig

Merge "Allwinner defconfig changes for 4.5" from Maxime Ripard:

A bunch of patches to enable new drivers related to Allwinner SoCs.

* tag 'sunxi-defconfig-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi: Clean up sunxi_defconfig
  ARM: sunxi: Really enable LRADC keys in sunxi_defconfig
  ARM: sunxi: Re-enable SID driver in sunxi_defconfig
  ARM: sunxi: Re-enable SID driver in multi_v7_defconfig
  ARM: multi_v7_defconfig: Enable RSB and AXP20X related drivers as modules
  ARM: sunxi_defconfig: Update MFD_AXP20X symbol and enable MFD_AXP20X_RSB
2015-12-15 17:43:36 +01:00
Arnd Bergmann
0ae102c64c mvebu defconfig for 4.5 (part 1)
update of mvebu_v5 defconfig with the addition of cpuidle
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlZlsxEACgkQCwYYjhRyO9UumgCfR353K8WoWry2InK6VnZvD9hG
 tuEAnjYYkYYGvdt4/hl/ASSXTOqfM9R4
 =2Sxs
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-defconfig-4.5-1' of git://git.infradead.org/linux-mvebu into next/defconfig

Merge "mvebu defconfig for 4.5 (part 1)" from Gregory CLEMENT:

update of mvebu_v5 defconfig with the addition of cpuidle

* tag 'mvebu-defconfig-4.5-1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: add Kirkwood cpuidle to defconfig
  ARM: mvebu: update v5 defconfig
2015-12-15 17:42:32 +01:00
Arnd Bergmann
d7e4859100 Two changes for NAND/MTD refactoring. The mtd_to_nand() helper will allow us to
stop using mtd->priv for NAND drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWZkijAAoJEFySrpd9RFgtnYIP/0y43CeSvaeyDl51xfxrep5m
 ctbICUKLi0dtrIwtyUuFgx33BjrOvEoqxEpEd0TMF1wPILhUszaEnqB03LXzi1zh
 090w0jXi0B5lSZuDmc5pFJR7staFz+suX4Gqs35xWWxymO0PX4+MxBWX/SE5whiB
 fw+aHm5AsG4NxL2wGuoTKhHS7HcUHPKhOCdhoHv9tknV7i5b4WFoh4k4W2CAhHpY
 5xKpJ0YKRHbBFFCKEpfQx1kUTo8dEe6ZcVWtnpRw7dg21KO8yEKQDP2fJvW6wTsv
 zF6SYKEvFL76D8j+Po2lDr0X+R1RLibi8LehVx3EMfG8j80p20xbHtnW4G1R5L2G
 l3Y/DVqsDL9esxyhFUTiYxig5tlYTYbaG6MmQch2OlPrXK/6UEDI1xsZuUCGRa8y
 8xZlnvLyogV4bQapnTV38wfKD9d6GQVS599uz9bpFd3TloxsQf5o/OJEkl0wEnTM
 xmZzXXQLK3vQfdy3biD+DEViQopcGK0GlYXaQPhQgUoNRHJzC1E42gFM7NUCp699
 nOUIsADi3QYZdC6OAcmZnnSiVqgPQBlwphR9YE0UmU50GHpFsx4QGNs/hIIMzXBS
 16aIV641baRxIvdbVvb23q9vKgoLzVKj2ZLdIwt/P0guo/NujrMU33EmWfyX/hOF
 Y0qb0T2GtuhHxEPfKti3
 =03sV
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.5/cleanup' of git://git.infradead.org/linux-mtd into next/cleanup

Merge "MTD/NAND cleanups for v4.5" from Brian Norris:

Two changes for NAND/MTD refactoring. The mtd_to_nand() helper will allow us to
stop using mtd->priv for NAND drivers.

* tag 'arm-soc/for-4.5/cleanup' of git://git.infradead.org/linux-mtd:
  ARM: nand: make use of mtd_to_nand() where appropriate
  mtd: nand: add an mtd_to_nand() helper
2015-12-15 17:39:53 +01:00
Arnd Bergmann
4ce5219554 mvebu cleanup for 4.5 (part 1)
remove unused mach/gpio.h in mach-mvebu
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlZlrCoACgkQCwYYjhRyO9Vc+ACghTYLKbFlJ15uf+1ShqDmivZe
 kGsAn12OMwASyXgCM5Nz5YfC1ufIoTSQ
 =Xr84
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-cleanup-4.5-1' of git://git.infradead.org/linux-mvebu into next/cleanup

Merge "mvebu cleanup for 4.5 (part 1)" from Gregory CLEMENT:

remove unused mach/gpio.h in mach-mvebu

* tag 'mvebu-cleanup-4.5-1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: remove unused mach/gpio.h
2015-12-15 17:36:20 +01:00
Linus Walleij
b6e30a4705 ARM: mvebu: kirkwood: add PogoPlug series 4 device tree
This adds a device tree for the CloudEngines PogoPlug series 4
NAS device. Inspired by out-of-tree boardfiles from ArchLinux
by Kevin Mihelich.

Cc: Moonman <moonman.ca@gmail.com>
Cc: Kevin Mihelich <kevin@archlinuxarm.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-15 17:18:52 +01:00
Hans Ulli Kroll
61521e3924 ARM: dts: kirkwood: Add DTS for Zyxel NSA325
Add a new DTS file to support the Zyxel NSA325(v2) dual bay
NAS device, based on the NSA320 DTS files.

The only difference to the NSA320 device is GPIO47.
This en/disables the power for the hdd in slot2, currently
fixed to on.

[gregory.clement@free-electrons.com: fix comment format]
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-15 17:12:55 +01:00
Guenther Hutzl
32e6b236d2 KVM: s390: consider system MHA for guest storage
Verify that the guest maximum storage address is below the MHA (maximum
host address) value allowed on the host.

Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
[adopt to match recent limit,size changes]

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-12-15 17:08:22 +01:00
Dominik Dingel
a3a92c31bf KVM: s390: fix mismatch between user and in-kernel guest limit
While the userspace interface requests the maximum size the gmap code
expects to get a maximum address.

This error resulted in bigger page tables than necessary for some guest
sizes, e.g. a 2GB guest used 3 levels instead of 2.

At the same time we introduce KVM_S390_NO_MEM_LIMIT, which allows in a
bright future that a guest spans the complete 64 bit address space.

We also switch to TASK_MAX_SIZE for the initial memory size, this is a
cosmetic change as the previous size also resulted in a 4 level pagetable
creation.

Reported-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-12-15 17:08:21 +01:00
Christian Borntraeger
8335713ad0 KVM: s390: obey kptr_restrict in traces
The s390dbf and trace events provide a debugfs interface.
If kptr_restrict is active, we should not expose kernel
pointers. We can fence the debugfs output by using %pK
instead of %p.

Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-12-15 17:06:32 +01:00
Christian Borntraeger
7ec7c8c70b KVM: s390: use assignment instead of memcpy
Replace two memcpy with proper assignment.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-12-15 16:06:48 +01:00
Guenter Roeck
f9f3f864b5 cris: Fix section mismatches in architecture startup code
Section mismatches can now result in build failures.
As result, cris:allnoconfig fails to build as follows.

WARNING: modpost: Found 7 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
FATAL: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.

Part of the problem is that references from .text to .init.text
are not permitted, and such references are used in cris startup code.
Since references from .head.text to .init.text are permitted, move
cris startup code to a new section .head.text.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-12-15 14:03:19 +01:00
Guenter Roeck
56edefc98a cris: debugport: Fix section mismatches
Section mismatches can now cause build failures, such as for
cris:allnoconfig. Rename affected variables to end with _console
to make section mismatch checks happy.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-12-15 14:03:11 +01:00
Shengjiu Wang
34bfbae33a ARM: 8475/1: SWP emulation: Restore original *data when failed
__user_swpX_asm maybe failed in first STREX operation, emulate_swpX
will try again, but the *data has been changed in first time. which
causes the result is wrong.
This patch is to fix this issue. When STREX succeed, change the *data.
if it fail, *data is not changed.

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-15 11:51:42 +00:00
Anson Huang
fa0708b320 ARM: 8471/1: need to save/restore arm register(r11) when it is corrupted
In cpu_v7_do_suspend routine, r11 is used while it is NOT
saved/restored, different compiler may have different usage
of ARM general registers, so it may cause issues during
calling cpu_v7_do_suspend.

We meet kernel fault occurs when using GCC 4.8.3, r11 contains
valid value before calling into cpu_v7_do_suspend, but when returned
from this routine, r11 is corrupted and lead to kernel fault.
Doing save/restore for those corrupted registers is a must in
assemble code.

Signed-off-by: Anson Huang <Anson.Huang@freescale.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Cc: <stable@vger.kernel.org> # v3.3+
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-15 11:51:41 +00:00
Russell King
c014953d84 ARM: fix uaccess_with_memcpy() with SW_DOMAIN_PAN
The uaccess_with_memcpy() code is currently incompatible with the SW
PAN code: it takes locks within the region that we've changed the DACR,
potentially sleeping as a result.  As we do not save and restore the
DACR across co-operative sleep events, can lead to an incorrect DACR
value later in this code path.

Reported-by: Peter Rosin <peda@axentia.se>
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-12-15 11:51:02 +00:00
Ludovic Desroches
0a804b5729 ARM: at91/dt: sama5d2 Xplained: pmic needs a specific sda hold time
Data have to be held longer for the PMIC device. The ACT8945A
datasheet claims that minimum SDA data hold time is about 300 ns.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15 12:23:32 +01:00
Ludovic Desroches
a2ebbb0795 ARM: at91/dt: sama5d4: update i2c compatible string
A new compatible string has been introduced: atmel,sama5d4-i2c. It
allows to use the i2c-sda-hold-time-ns property if needed.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15 12:21:59 +01:00
Nicolas Ferre
bdf9a4d303 ARM: at91/dt: sama5d4 master clock can run at 200MHz now
After the change of frequency a SAMA5D4 can reach, we have to modify the
maximum clock specification for the master clock, up to 200MHz now.

It avoids the wrong message saying that "master clk is overclocked" for this
configuration.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15 12:20:24 +01:00
Will Deacon
129b985cc3 Merge branch 'aarch64/efi' into aarch64/for-next/core
Merge in EFI memblock changes from Ard, which form the preparatory work
for UEFI support on 32-bit ARM.
2015-12-15 10:59:03 +00:00
Wenyou Yang
94c2317cf4 ARM: at91/defconfig: enable watchdog drivers in sama5_defconfig
Enable AT91SAM9X and SAMA5D4 watchdog drivers.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15 11:18:39 +01:00
Wenyou Yang
92bd7aa413 ARM: at91/dt: sama5d2: add watchdog node
Add watchdog node to support SAMA5D4 watchdog.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15 11:12:07 +01:00
Marek Vasut
ca5a4b5622 ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK
Add support for the DENX MA5D4 SoM and MA5D4EVK board. The system
consists of a SoM with eMMC, SPI NOR for booting, 2x SPI CAN chip
and an EVK with microSD slot, 2x UART, 2x CAN port, 3x USB port,
LEDs and expansion headers.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15 11:07:26 +01:00
Marek Vasut
49f6697499 ARM: at91/dt: sama5d4: Add pinmux for 8-bit MMC0 bus
Add pinmux for the 4 remaining signals used in 8-bit MMC 0
bus configuration.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15 11:06:25 +01:00
Marek Vasut
5e4458fa5d ARM: at91/dt: sama5d4: Fix mmc0 pinmux comments
Synchronise the comments in mmc0 pinmux node with HSMCI0 pinmux
description in the Atmel SAMA5D4 datasheet from 24-Aug-15 page
1119, section 37.6.1, Table 37-3 .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Josh Wu <josh.wu@atmel.com>
Reported-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15 11:05:29 +01:00
Geliang Tang
5bcd927233 ARM: davinci: fix a problematic usage of WARN()
WARN() takes a condition and a format string. The condition was
omitted. So I added it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-15 15:29:34 +05:30
Arnd Bergmann
1b50b0c1ce ARM: davinci: only select WT cache if cache is enabled
The DA830 chip only works if the dcache is in writethrough mode,
but that produces a harmless Kconfig warning if the cache happens
to be disabled:

warning: (ARCH_DAVINCI_DA830) selects CPU_DCACHE_WRITETHROUGH which has unmet direct dependencies ((CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE)

This makes the select conditional so we don't have to worry
about the warning in randconfig builds any more.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-15 15:21:53 +05:30
Magnus Damm
0da4cfd1a2 ARM: shmobile: r8a7794: IPMMU compat string SoC part number update
Update IPMMU compat strings to include SoC part number.

By specifying SoC part number in DT it becomes possible
to implement SoC specific features in the IPMMU driver.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15 18:17:10 +09:00
Magnus Damm
c51b1473ed ARM: shmobile: r8a7793: IPMMU compat string SoC part number update
Update IPMMU compat strings to include SoC part number.

By specifying SoC part number in DT it becomes possible
to implement SoC specific features in the IPMMU driver.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15 18:16:58 +09:00
Magnus Damm
3c8ab0c88e ARM: shmobile: r8a7791: IPMMU compat string SoC part number update
Update IPMMU compat strings to include SoC part number.

By specifying SoC part number in DT it becomes possible
to implement SoC specific features in the IPMMU driver.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15 18:16:48 +09:00
Magnus Damm
c8d6686e41 ARM: shmobile: r8a7790: IPMMU compat string SoC part number update
Update IPMMU compat strings to include SoC part number.

By specifying SoC part number in DT it becomes possible
to implement SoC specific features in the IPMMU driver.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15 18:16:31 +09:00
Daniel Lezcano
751605152b h8300: Rename ctlr_out/in[bwl] to raw_read/write[bwl]
For the sake of consistency, let rename all ctrl_out/in calls to the write/read
calls so we have the same API consistent with the other architectures hence
open the door for the increasing of the test compilation coverage.

The unsigned long coercive cast is removed because all variables are set to
the right type "void __iomem *".

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15 10:12:03 +01:00
Krzysztof Hałasa
3a35e470bc ARM: dts: imx6: Fix Ethernet PHY mode on Ventana boards
Gateworks Ventana boards seem to need "RGMII-ID" (internal delay)
PHY mode, instead of simple "RGMII", for their Marvell 88E1510
transceiver. Otherwise, the Ethernet MAC doesn't work with Marvell PHY
driver (TX doesn't seem to work correctly).

Tested on GW5400 rev. C.

This bug affects ARM Fedora 23.

Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-15 16:53:15 +08:00
Bai Ping
13fdae1ae5 ARM: dts: imx: Fix the assigned-clock mismatch issue on imx6q/dl
The 'assigned-clock-parents' and 'assigned-clock-rates' list
should corresponding to the 'assigned-clocks' property clock list.

Signed-off-by: Bai Ping <b51503@freescale.com>
Fixes: ed339363de ("ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-15 16:48:56 +08:00
Linus Walleij
acde758b31 ARM: realview: add device tree for PB11MPCore
This adds a device tree for the ARM RealView ARM11MPCore
reference design.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15 09:45:30 +01:00
Daniel Lezcano
97a23beb8d clocksource/drivers/h8300_timer8: Separate the Kconfig option from the arch
The current Kconfig option is the H8300 arch option. In order to comply to the
current rule, let's create a specific option for the timer8 and select it
from the arch's Kconfig.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15 09:43:59 +01:00
Linus Walleij
5420b4b156 ARM: realview: add an DT SMP boot method
This adds an SMP boot method for the ARM RealView reference
designs. We also select HAVE_SMP by default and make it use
SMP_ON_UP so we only need to support one single kernel across
the RealView reference designs when using DT.

The RealViews need to have the SCU (Snoop Control Unit)
activated on boot, and this is now done by looking up its
address from the device tree and initializing it and counting
the available cores.

The RealViews boot by using a magic address register in the
system controller (SYS_FLAGS) to store the boot address,
the ROM will then read this register to the PC when the CPUs
are taken out of WFI. This code uses a handle to the syscon
regmap to access this register.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15 09:42:52 +01:00
Linus Walleij
ca5b21fa6e ARM: realview: select SP810 and ICST for the DT variant
The device tree boot for RealView need the SP810 system controller
(same as found on the Versatile Express) to set up the timers on the
board so the machine can tick. It further utilize the ICST307 through
its system controller for 6 other oscillators. We have to select these
from Kconfig or the machine does not boot.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15 09:42:51 +01:00
Daniel Lezcano
39366ef421 clocksource/drivers/exynos_mct: Fix Kconfig and add COMPILE_TEST option
Let the platform's Kconfig to select the clock instead of having a reverse
dependency from the driver to the platform options.

Add the COMPILE_TEST option for the compilation test coverage. Due to the
non portable 'delay' code, this driver is only compilable on ARM.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-12-15 09:41:52 +01:00
Daniel Lezcano
1becd6edea clocksource/drivers/prcmu: Fix Kconfig and add COMPILE_TEST option
Let the platform's Kconfig to select the clock instead of having a reverse
dependency from the driver to the platform options.

Add the COMPILE_TEST option for the compilation test coverage.

This change is debatable as the option itself in the Kconfig allows to
select the driver for the platform or not. This change will make the prcmu
timer always selected.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15 09:41:50 +01:00
Arnd Bergmann
2b749cb3a5 ARM: realview: remove private barrier implementation
The realview barrier implementation tries to avoid calling outer_sync in order
to not lock up as a result of a bug in the l220 cache controller.

This gets in the way of the multiplatform support, but we can still remove
it if we make sure that the outer_sync function never gets called, by replacing
the function pointer with NULL, right after initialization.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Fixed up header inclusions]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15 09:41:34 +01:00
Arnd Bergmann
38541bf485 ARM: no longer force unbuffered DMA for realview
Commit 42c4dafe80 ("ARM: 6202/1: Do not ARM_DMA_MEM_BUFFERABLE
on RealView boards with L210/L220") changed the generic setting for
ARM_DMA_MEM_BUFFERABLE to be disabled on any Realview kernel that includes
support for any of the ARM11 variations. Doing this was required to
allow doing DMA without a lockup in the l2x0 cache controller on the
Realview platform.

Unfortunately, in a kernel that also contains support for any ARMv7
based machine, the same change makes it impossible to do DMA on ARMv7,
which gets in the way of enabling multiplatform support on Realview.

As confirmed by Catalin Marinas and Linus Walleij, the current
code for Realview that we have in the kernel does not actually
perform any DMA, and this is unlikely to change in the future.
Therefore we can revert 42c4dafe80 without introducing regressions,
but we must never start using DMA on this platform in the future.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15 09:41:33 +01:00
Arnd Bergmann
930748a033 ARM: realview: don't map undefined PCI registers
PCI support for realview was never merged, and trying to build realview with
CONFIG_PCI enabled fails because the constants for the mapping windows are
not defined anywhere.

This removes them from the static I/O window mapping table as a preparation
for multiplatform support.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15 09:41:32 +01:00
Arnd Bergmann
fd0053c9eb ARM: realview: remove sparsemem hack
The realview-pbx platform has an elaborate way of avoiding the use of highmem
by redefining its phys_to_virt function. In practice this doesn't help all
that much, and it gets in the way of doing multiplatform builds for
realview.

This removes the feature and kills off the mach/memory.h file for realview.
We also lose the ability to do sparsemem with this patch, but that should
be put back into place for generic multiplatform configurations, to save
a little memory on PBX.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15 09:41:31 +01:00
Daniel Lezcano
389d9b5841 clocksource/drivers/pxa_timer: Move the Kconfig rule
Instead of having the clocksource's Kconfig depending on the arch, let the
arch to select the timer it needs.

The CLKSRC_OF dependency is removed because already selected by the
ARCH_PXA, and it is added for SA1100.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15 09:41:17 +01:00
Daniel Lezcano
2ffdf71b83 clocksource/drivers/st_lpc: Fix Kconfig dependency
Change the Kconfig selection rule by letting the STI arch to select
the timer.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-12-15 09:41:14 +01:00
Kouei Abe
1fd6b873c2 arm64: defconfig: Add Renesas R-Car SATA driver for R-Car Gen3 SoCs
This adds Renesas sata_rcar driver to defconfig.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15 13:21:23 +09:00