Commit graph

127,691 commits

Author SHA1 Message Date
Fabio Estevam
9a3bb943c2 ARM: dts: imx7s-warp: Add audio support
warp7 has a sgtl5000 audio codec.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-17 22:34:33 +08:00
Stefan Agner
1c4e2a11ba ARM: dts: imx7d: add clock-frequency to CPU nodes
Add clock-frequency property to CPU nodes. Avoids warnings like
"/cpus/cpu@0 missing clock-frequency property".

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-17 22:34:33 +08:00
Stefan Agner
f5bd51b60f ARM: dts: imx7d: move CPU operating points to imx7d.dtsi
Only i.MX 7Dual SoC supports CPU frequencies of up to 1GHz. The i.MX
7Solo can run with up to 800MHz and does so without making use of DVFS
usually. While the device tree clearly specified a too fast operating
point for i.MX 7Solo, the kernel did not used it in practise so far
because the CPUfreq driver does not get loaded on i.MX 7Solo devices
(since the fsl,imx7s compatible string is not in the list of devices
making use of the cpufreq-dt driver...).

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-17 22:34:32 +08:00
Joshua Clayton
e7d0dbf9e2 ARM: dts: imx6q-evi: Use GPIO_6 for fec irq
Apply hardware workaround for ethernet problem
See nxp erratum err006687

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-17 22:34:32 +08:00
Fabio Estevam
7310f07531 ARM: dts: imx7s: Add SAI nodes
Add the three SAI ports nodes.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-17 22:34:32 +08:00
Fabio Estevam
2f5ac9ba20 ARM: dts: imx7s: Add SDMA node
Add a SDMA entry in the dtsi file.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-17 22:34:31 +08:00
Vladimir Murzin
f7f6f2d94f arm64: KVM: report configured SRE value to 32-bit world
After commit b34f2bc ("arm64: KVM: Make ICC_SRE_EL1 access return the
configured SRE value") we report SRE value to 64-bit guest, but 32-bit
one still handled as RAZ/WI what leads to funny promise we do not keep:

"GICv3: GIC: unable to set SRE (disabled at EL2), panic ahead"

Instead, return the actual value of the ICC_SRE_EL1 register that the
guest should see.

 [ Tweaked commit message - Christoffer ]

Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-17 12:46:23 +02:00
Vladimir Murzin
b63bebe235 arm64: KVM: remove misleading comment on pmu status
Comment about how PMU access is handled is not relavant since v4.6
where proper PMU support was added in.

Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-17 12:46:21 +02:00
Marc Zyngier
674e701270 arm64: Document workaround for Cortex-A72 erratum #853709
We already have a workaround for Cortex-A57 erratum #852523,
but Cortex-A72 r0p0 to r0p2 do suffer from the same issue
(known as erratum #853709).

Let's document the fact that we already handle this.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-17 12:23:47 +02:00
Frank Wang
1d3bc1d6c9 arm64: dts: rockchip: configure usb2-phy support for rk3399-evb
Add vcc5v0_host regulator for usb2-phy and enable host-port support.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-17 11:58:56 +02:00
Frank Wang
103e9f8537 arm64: dts: rockchip: add usb2-phy support for rk3399
Add usb2-phy nodes and specify phys phandle for ehci.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-17 11:47:56 +02:00
Christoffer Dall
9ac7159546 KVM: arm/arm64: Change misleading use of is_error_pfn
When converting a gfn to a pfn, we call gfn_to_pfn_prot, which returns
various kinds of error values.  It turns out that is_error_pfn() only
returns true when the gfn was found in a memory slot and could somehow
not be used, but it does not return true if the gfn does not belong to
any memory slot.

Change use to is_error_noslot_pfn() which covers both cases.

Note: Since we already check for kvm_is_error_hva(hva) explicitly in the
caller of this function while holding the kvm->srcu lock protecting the
memory slots, this should never be a problem, but nevertheless this
change is warranted as it shows the intention of the code.

Reported-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-17 11:38:03 +02:00
Geert Uytterhoeven
17d9af9e06 ARM: dts: r8a7791: Remove obsolete vsp1 properties
As of commit 5aa2eb3c86 ("[media] v4l: vsp1: Configure device
based on IP version"), the DT properties to identify the exact VSP
device instance features are no longer used. Hence remove them.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-17 09:22:26 +02:00
Geert Uytterhoeven
7b2d7a2147 ARM: dts: r8a7790: Remove obsolete vsp1 properties
As of commit 5aa2eb3c86 ("[media] v4l: vsp1: Configure device
based on IP version"), the DT properties to identify the exact VSP
device instance features are no longer used. Hence remove them.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-17 09:21:58 +02:00
Simon Horman
e6ed3f533d ARM: dts: alt: add MMCIF support
Define the Alt board dependent part of the MMCIF device node.

Like the Silk the board has eMMC chip along with the  necessary voltage
regulator (note that the Vcc/Vccq regulator is dummy -- it's required by
the MMCIF driver but doesn't actually exist on the board).

Based on work for the Silk board by Vladimir Barinov and Sergei Shtylyov.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-17 09:07:51 +02:00
Simon Horman
2b41091b89 ARM: dts: alt: add SDHI0 and 1 support
Define the Alt board dependent part of the SDHI0 and 1
device nodes along with the necessary voltage regulators.

Based on work by the original patch by Vladimir Barinov and
Sergei Shtylyov for the Silk board.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-17 09:07:29 +02:00
Geert Uytterhoeven
aedc53a959 ARM: debug-ll: Add support for r8a7992
Enable low-level debugging support for R-Car V2H (r8a7792).
V2H uses SCIF0 for the debug console, like most other R-Car Gen2 SoCs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-17 09:06:25 +02:00
Krzysztof Kozlowski
94f703a5b3 ARM: multi_v7_defconfig: Enable SECCOMP
Systemd already supports seccomp.  It seems some distros are building
systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors:

systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-08-17 09:05:09 +02:00
Krzysztof Kozlowski
05a39f0e87 ARM: exynos_defconfig: Enable SECCOMP
Systemd already supports seccomp.  It seems some distros are building
systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors:

systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-08-17 09:05:05 +02:00
Sergei Shtylyov
bb249cdc3e ARM: dts: r8a7794: add VSP1 support
Describe two instances (VSPS and VSPD0) of the VSP1 in the R8A7794 device
tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-17 09:04:38 +02:00
Linus Torvalds
45b6ae761e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
 "A couple of bug fixes, minor cleanup and a change to the default
  config"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: fix failing CUIR assignment under LPAR
  s390/pageattr: handle numpages parameter correctly
  s390/dasd: fix hanging device after clear subchannel
  s390/qdio: avoid reschedule of outbound tasklet once killed
  s390/qdio: remove checks for ccw device internal state
  s390/qdio: fix double return code evaluation
  s390/qdio: get rid of spin_lock_irqsave usage
  s390/cio: remove subchannel_id from ccw_device_private
  s390/qdio: obtain subchannel_id via ccw_device_get_schid()
  s390/cio: stop using subchannel_id from ccw_device_private
  s390/config: make the vector optimized crc function builtin
  s390/lib: fix memcmp and strstr
  s390/crc32-vx: Fix checksum calculation for small sizes
  s390: clarify compressed image code path
2016-08-16 15:50:22 -07:00
Stephen Warren
016655121e arm64: tegra: Simplify Tegra210 GPIO compatible value
The compatible value need only include an entry for the specific HW
generation, plus the oldest HW version that introduced changes it is
backwards-compatible with; intermediate versions aren't necessary. Since
Tegra124 GPIO is backwards-compatible with Tegra30 GPIO, there's no need
to include the Tegra124 value in the Tegra210 DTS. This makes the kernel
DT better match the copy of the DT files included in U-Boot.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-08-16 15:10:40 +02:00
Jon Hunter
7e9d474954 ARM: tegra: Correct polarity for Tegra114 PMIC interrupt
The ARM GIC only supports interrupts with either level-high or
rising-edge types for SPIs. The interrupt type for the Palmas PMIC used
for Tegra114 boards is specified as level-low which is invalid for the
GIC. This has gone undetected because until recently, failures to set
the interrupt type when the interrupts are mapped via firmware (such as
device-tree) have not been reported. Since commits 4b357daed6
("genirq: Look-up trigger type if not specified by caller") and
1e2a7d7849 ("irqdomain: Don't set type when mapping an IRQ"), failure
to set the interrupt type will cause the requesting of the interrupt to
fail and exposing incorrectly configured interrupts.

Please note that although the interrupt type was never being set for the
Palmas PMIC, it was still working fine, because the default type setting
for the interrupt, 'level-high', happen to match the correct type for
the interrupt.

Finally, it should be noted that the Palmas interrupt from the PMIC is
actually 'level-low', however, this interrupt signal is inverted by the
Tegra PMC and so the GIC actually sees a 'level-high' interrupt which is
what should be specified in the device-tree interrupt specifier.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-08-16 15:10:23 +02:00
Stephen Warren
a70cb07bb3 ARM: tegra: Fix Tegra114 USB compatible values
DT compatible values should always include an entry for the specific
chip in addition to any earlier generations that the HW is backwards-
compatible with.

This doesn't affect the kernel at all given current driver code, but
U-Boot needs to distinguish between Tegra114 and Tegra30 for this HW,
and I'd like to synchronize the DT content.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-08-16 15:10:14 +02:00
Xiaodong Liu
e67479b13e crypto: sha512-mb - fix ctx pointer
1. fix ctx pointer
Use req_ctx which is the ctx for the next job that have
been completed in the lanes instead of the first
completed job rctx, whose completion could have been
called and released.

Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16 17:09:43 +08:00
Xiaodong Liu
172b1d6b5a crypto: sha256-mb - fix ctx pointer and digest copy
1. fix ctx pointer
Use req_ctx which is the ctx for the next job that have
been completed in the lanes instead of the first
completed job rctx, whose completion could have been
called and released.
2. fix digest copy
Use XMM register to copy another 16 bytes sha256 digest
instead of a regular register.

Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-08-16 17:09:42 +08:00
Markus Elfring
21c66101b4 ARM: s3c64xx: Delete unnecessary assignment for the field "owner"
The field "owner" is set by the core.  Thus delete an unneeded
initialization.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-08-16 08:16:43 +02:00
Fabian Frederick
b19aa5a70e ARM: imx: remove platform-mxc_rnga
According to commit c9ee94965d
("ARM: imx: deconstruct mxc_rnga initialization")

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-16 13:59:15 +08:00
Rafael J. Wysocki
5d87f493dd x86/power/64: Use __pa() for physical address computation
The value of temp_level4_pgt is the physical address of the
top-level page directory, so use __pa() to compute it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
2016-08-16 00:39:37 +02:00
Neil Armstrong
f759b640c7 ARM64: dts: amlogic: meson-gxbb: Add watchdog node
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-08-15 13:37:34 -07:00
Linus Walleij
8f2c00629e ARM: realview: imply device tree boot
This reduces the Kconfig for the RealView by assuming we are
always booting from the device tree, and removing all the uses
of CONFIG_REALVIEW_DT and replacing with CONFIG_ARCH_REALVIEW.

Further:

- Drop REALVIEW_HIGH_PHYS_OFFSET: we don't use this with device
  tree.

- Drop the REALVIEW_EB_ARM11MP_REVB option: we now handle this
  by simply using another device tree.

- Drop the PB1176 secure flash option: this is defined in the
  PB1176 device tree but marked as "disabled", so users who
  want to use it can simply enable it in the device tree and
  go hacking around.

Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-15 20:53:07 +02:00
Vladimir Murzin
21c170c28e ARM: realview: no need to select SMP_ON_UP explicitly
SMP_ON_UP is already defaulted to "y" and has all dependencies expressed
- no need to select it per platform level

Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-15 20:52:57 +02:00
Linus Walleij
7484c727b6 ARM: realview: delete the RealView board files
The device tree boot is now feature-complete and fully working,
so remove all the RealView board files. Move the remaining
realview_cpu_die() function frome "core.h" to the new "hotplug.h"
and leave just a minimal device tree core.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-15 20:52:55 +02:00
Jisheng Zhang
92bb8d5d55 ARM: 8597/1: VDSO: put RO and RO after init objects into proper sections
vdso_data_mapping is never modified, so mark it as const.

vdso_total_pages, vdso_data_page, vdso_text_mapping and cntvct_ok are
initialized by vdso_init(), thereafter are read only.

The fact that they are read only after init makes them candidates for
__ro_after_init declarations.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-08-15 18:54:43 +01:00
Javier Martinez Canillas
08ef980697 ARM: dts: omap3/4/5/dra7: remove unneeded unit name for gpio-leds nodes
This patch fixes the following DTC warnings for many boards:

"Node /leds/led@1 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:42:42 -07:00
Javier Martinez Canillas
c731abd991 ARM: dts: am335x/437x/57xx: remove unneeded unit name for gpio-leds nodes
This patch fixes the following DTC warnings for many boards:

"Node /leds/led@1 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:42:41 -07:00
Javier Martinez Canillas
45ed37f7b9 ARM: dts: omap3/4: remove unneeded unit name for gpio-keys nodes
This patch fixes the following DTC warnings for many boards:

"Node /gpio_keys/button0@10 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:42:40 -07:00
Javier Martinez Canillas
57a78a8a6f ARM: dts: am335x/am437x: remove unneeded unit name for gpio-keys nodes
This patch fixes the following DTC warnings for many boards:

"Node /gpio_keys/button0@10 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:42:39 -07:00
Javier Martinez Canillas
909b0ebde9 ARM: dts: omap3/dra62x: remove unneeded unit name for fixed regulators
This patch fixes the following DTC warnings for many boards:

"Node /fixedregulator@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:42:39 -07:00
Javier Martinez Canillas
0b0d912ab5 ARM: dts: da850/dm81x: remove unneeded unit name for fixed regulators
This patch fixes the following DTC warnings for many boards:

"Node /fixedregulator@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:42:38 -07:00
Javier Martinez Canillas
4c049a5b7c ARM: dts: am335x/am437x: remove unneeded unit name for fixed regulators
This patch fixes the following DTC warnings for many boards:

"Node /fixedregulator@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:42:37 -07:00
Javier Martinez Canillas
18ad99d4c2 ARM: dts: am335x/am437x: remove unneeded unit name for gpio-matrix-keypad
This patch fixes the following DTC warnings for many boards:

"Node /matrix_keypad@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:42:37 -07:00
Javier Martinez Canillas
0b965a13ad ARM: dts: omap3: overo: add missing unit name for lcd35 display
Commit b8d368caa8 ("ARM: dts: omap3: overo: remove unneded unit names
in display nodes") removed the unit names for all Overo display nodes
that didn't have a reg property.

But the display in arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi does
have a reg property so the correct fix was to make the unit name match
the value of the reg property, instead of removing it.

This patch fixes the following DTC warning for boards using this dtsi:

"ocp/spi@48098000/display has a reg or ranges property, but no unit name"

Fixes: b8d368caa8 ("ARM: dts: omap3: overo: remove unneded unit names in display nodes")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:42:36 -07:00
Javier Martinez Canillas
f515f81424 ARM: dts: omap3/am4372: add missing unit name to ocp node
This patch fixes the following DTC warnings for many boards:

"Node /ocp has a reg or ranges property, but no unit name"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:42:35 -07:00
Tony Lindgren
73912188a6 Merge branch 'dts-fixes' into omap-for-v4.8/fixes 2016-08-15 09:16:45 -07:00
Adam Ford
4875b8fcf6 ARM: dts: logicpd-somlv: Fix NAND device nodes
This fix was applied to a bunch of omap3 devices including LogicPD
Torpedo, but this got missed since it was new around the same times
the patches were applied.  This makes the GPMC parameters match the
Torpedo since they have the same processor PoP memory.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:14:10 -07:00
Adam Ford
a8771a6a64 ARM: dts: logicpd-torpedo-som: Provide NAND ready pin
This was applied to a variety of omap3 boards, so it should
probably be applied here.  I did not test NAND performance, but
I tested this with UBI to confirm read/write didn't break.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:14:02 -07:00
Johan Hovold
153b58ea93 ARM: dts: overo: fix gpmc nand on boards with ethernet
The gpmc ranges property for NAND at CS0 was being overridden by later
includes that defined gpmc ethernet nodes, effectively breaking NAND on
these systems:

	omap-gpmc 6e000000.gpmc: /ocp/gpmc@6e000000/nand@0,0 has
	malformed 'reg' property

Instead of redefining the NAND range in every such dtsi, define all
currently used ranges in omap3-overo-base.dtsi.

Fixes: 98ce6007ef ("ARM: dts: overo: Support PoP NAND")
Cc: stable <stable@vger.kernel.org> # 4.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:10:49 -07:00
Johan Hovold
5e0568dfbf ARM: dts: overo: fix gpmc nand cs0 range
The gpmc ranges property for NAND at CS0 has been broken since it was
first added.

This currently prevents the nand gpmc child node from being probed:

	omap-gpmc 6e000000.gpmc: /ocp/gpmc@6e000000/nand@0,0 has
	malformed 'reg' property

and consequently the NAND device from being registered.

Fixes: 98ce6007ef ("ARM: dts: overo: Support PoP NAND")
Cc: stable <stable@vger.kernel.org>	# 4.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:10:45 -07:00
Teresa Remmet
42647f9472 ARM: dts: am335x: Update elm phandle binding
The check for the "elm_id" binding had been removed.
This causes nand boot to fail on boards still using
the old binding. Update the bindings on those boards.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:10:39 -07:00