Commit graph

127,691 commits

Author SHA1 Message Date
Linus Torvalds
687ee0ad4e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and
    co. at Google. https://lwn.net/Articles/701165/

 2) Do TCP Small Queues for retransmits, from Eric Dumazet.

 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei
    Starovoitov.

 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai.

 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn.

 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker.

 7) Support ndo_poll_controller in mlx5, from Calvin Owens.

 8) Move VRF processing to an output hook and allow l3mdev to be
    loopback, from David Ahern.

 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern.

10) Congestion control in RXRPC, from David Howells.

11) Support geneve RX offload in ixgbe, from Emil Tantilov.

12) When hitting pressure for new incoming TCP data SKBs, perform a
    partial rathern than a full purge of the OFO queue (which could be
    huge). From Eric Dumazet.

13) Convert XFRM state and policy lookups to RCU, from Florian Westphal.

14) Support RX network flow classification to igb, from Gangfeng Huang.

15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski.

16) New skbmod packet action, from Jamal Hadi Salim.

17) Remove some inefficiencies in snmp proc output, from Jia He.

18) Add FIB notifications to properly propagate route changes to
    hardware which is doing forwarding offloading. From Jiri Pirko.

19) New dsa driver for qca8xxx chips, from John Crispin.

20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej
    Żenczykowski.

21) Add L3 mode to ipvlan, from Mahesh Bandewar.

22) Support 802.1ad in mlx4, from Moshe Shemesh.

23) Support hardware LRO in mediatek driver, from Nelson Chang.

24) Add TC offloading to mlx5, from Or Gerlitz.

25) Convert various drivers to ethtool ksettings interfaces, from
    Philippe Reynes.

26) TX max rate limiting for cxgb4, from Rahul Lakkireddy.

27) NAPI support for ath10k, from Rajkumar Manoharan.

28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed.

29) UDP replicast support in TIPC, from Richard Alpe.

30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru.

31) Support BQL in thunderx driver, from Sunil Goutham.

32) TSO support in alx driver, from Tobias Regnery.

33) Add stream parser engine and use it in kcm.

34) Support async DHCP replies in ipconfig module, from Uwe
    Kleine-König.

35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits)
  mlxsw: switchx2: Fix misuse of hard_header_len
  mlxsw: spectrum: Fix misuse of hard_header_len
  net/faraday: Stop NCSI device on shutdown
  net/ncsi: Introduce ncsi_stop_dev()
  net/ncsi: Rework the channel monitoring
  net/ncsi: Allow to extend NCSI request properties
  net/ncsi: Rework request index allocation
  net/ncsi: Don't probe on the reserved channel ID (0x1f)
  net/ncsi: Introduce NCSI_RESERVED_CHANNEL
  net/ncsi: Avoid unused-value build warning from ia64-linux-gcc
  net: Add netdev all_adj_list refcnt propagation to fix panic
  net: phy: Add Edge-rate driver for Microsemi PHYs.
  vmxnet3: Wake queue from reset work
  i40e: avoid NULL pointer dereference and recursive errors on early PCI error
  qed: Add RoCE ll2 & GSI support
  qed: Add support for memory registeration verbs
  qed: Add support for QP verbs
  qed: PD,PKEY and CQ verb support
  qed: Add support for RoCE hw init
  qede: Add qedr framework
  ...
2016-10-05 10:11:24 -07:00
Renat Valiullin
b91688f528 x86/vmware: Skip lapic calibration on VMware
In a virtualized environment the APIC timer calibration can go wrong when
the host is overcommitted or the guest is running nested. This results
in the APIC timers operating at an incorrect frequency.

Since VMware supports a mechanism to retrieve the local APIC frequency we
can ask the hypervisor for it and skip the APIC calibration loop.

Signed-off-by: Renat Valiullin <rvaliullin@vmware.com>
Acked-by: Alok N Kataria <akataria@vmware.com>
Cc: virtualization@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20161004201148.GA1421@uu64vm
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-05 11:43:30 +02:00
sylvain.bertrand@gmail.com
2df0e78b44 x86/syscalls: Remove bash-isms in syscall table generator
Signed-off-by: Sylvain BERTRAND <sylvain.bertrand@gmail.com>
Link: http://lkml.kernel.org/r/20160929162234.GA29592@freedom
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-05 11:34:25 +02:00
Boris Ostrovsky
565fdc6a2a xen/x86: Initialize per_cpu(xen_vcpu, 0) a little earlier
xen_cpuhp_setup() calls mutex_lock() which, when CONFIG_DEBUG_MUTEXES
is defined, ends up calling xen_save_fl(). That routine expects
per_cpu(xen_vcpu, 0) to be already initialized.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-10-05 10:32:22 +01:00
Paul Burton
fd4d740427 MIPS: SEAD3: Parse memsize in DT shim
Parse the memsize argument provided by the bootloader in the DT shim
code, allowing the user to override it on the command line. This places
all of the DT manipulation code into sead3-dtshim.c.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14058/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Burton
a1ec6003f2 MIPS: SEAD3: Use generic restart-poweroff driver
Remove the custom platform code to restart when instructed to power off,
instead relying upon the generic restart-poweroff driver probed via DT
to do the same thing.

Remove also the halt implementation, which is incorrect. The generic
MIPS version will hang the system as halt should.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14057/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Burton
70bfdcec9a MIPS: SEAD3: Reset via generic syscon-reboot driver & DT
Remove the SEAD3 implementation of _machine_restart & instead make use
of the generic syscon-reboot driver probed via device tree.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14056/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Burton
c764583f40 MIPS: SEAD3: Use register-bit-led driver via DT for LEDs
Probe a driver for the PLED & FLED LEDs found on the SEAD3 board using
the register-bit-led driver via device tree, rather than a custom driver
via platform code. Enable support for the register-bit-led driver & its
prerequisite syscon in sead3_defconfig.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14054/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Burton
3aefc6554a MIPS: SEAD3: Probe parallel flash via DT
Probe the system parallel flash using device tree rather than platform
code, in order to reduce the amount of the latter.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14053/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Burton
7afd2a5aec MIPS: SEAD3: Probe EHCI controller using DT
Probe the SEAD3 EHCI controller using the generic-ehci driver & device
tree rather than platform code, in order to reduce the amount of the
latter.

Now that no devices probed from platform code require interrupts, remove
the retrieval of the IRQ domain & sead3int.h.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14051/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Burton
a34e93882d MIPS: SEAD3: Probe ethernet controller using DT
Probe the smsc911x ethernet controller using device tree rather than
platform code, reducing the amount of the latter.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14050/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Burton
53f37d1d30 MIPS: SEAD3: Use generic ns16550a earlycon support
Stop selecting SYS_HAS_EARLY_PRINTK & remove the custom support for
early output to the ns16550a UARTs, instead relying upon generic
ns16550a earlycon support. This reduces the amount of platform code
required for SEAD3 without losing any functionality.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14049/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Burton
c11e3b48db MIPS: SEAD3: Probe UARTs using DT
Probe the UARTs on SEAD3 boards using device tree rather than platform
code, in order to reduce the amount of the latter. This requires that
CONFIG_SERIAL_OF_PLATFORM be enabled, so enable it in sead3_defconfig.
The SEAD3 DT shim code is extended to read bootloader environment
variables to determine the appropriate UART & mode for kernel console
output & set the stdout-path property of the chosen node accordingly.

In contrast to the old platform code, which appears to have only ever
set "console=ttyS0,38400n8r" with the code in console_config never
having an effect, this will honor the "yamontty" environment variable to
select between the 2 UARTs on the board and then check the "modetty0" or
"modetty1" variable as appropriate to determine the UART configuration.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14048/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Burton
b6d5e47e67 MIPS: SEAD3: Probe interrupt controllers using DT
Probe the CPU interrupt controller & optional Global Interrupt
Controller (GIC) using devicetree rather than platform code. Because the
bootloader on SEAD3 does not provide a device tree to the kernel & the
device tree is always built in, we patch out the GIC node during boot if
we detect that a GIC is not present in the system.

The appropriate IRQ domain is discovered by platform code setting up
device IRQ numbers temporarily. It will be removed by further patches
which move the devices towards being probed via device tree.

No behavioural change is intended by this patch.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14047/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Burton
0a15273666 MIPS: SEAD3: Split obj-y entries across lines
Split the obj-y entries for SEAD3 onto a line each, so that they're more
independent & can be modified more clearly by later commits.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14046/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Burton
ba7505022c MIPS: pm-cps: Generate idle state entry code when CPUs are onlined
The MIPS Coherent Processing System (CPS) power management code has
previously generated code used to enter low power idle states once
during boot for all CPUs. This has the drawback that if a CPU is present
in the system but not being used (for example due to the maxcpus kernel
parameter) then we encounter problems due to not having probed that CPU
for information about its type & properties. The result of this is that
we generate entry code which is both unused, potentially entirely
invalid & likely to be unsuitable for the CPU in question anyway.

Avoid this by generating idle state entry code only when a CPU is
brought online. This way we only ever generate code for CPUs that we
know we've probed the properties of, and that will actually be used.

[ralf@linux-mips.org: Resolve merge conflict.]

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14259/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Gortmaker
cd14c92bbd MIPS: kvm: Audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  In the case of
kvm where it is modular, we can extend that to also include files
that are building basic support functionality but not related
to loading or registering the final module; such files also have
no need whatsoever for module.h

The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each instance for the
presence of either and replace as needed.  In this case, we did
not need to add either to any files.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14036/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Gortmaker
2722090af4 MIPS: pci: Audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace as needed.

We also needed to remove the no-op MODULE_DEVICE_TABLE usage in
several instances to permit removal of the module.h include.  The
files in these instances were all controlled by bool Kconfig.

In one instance, module_param was being used so we transition the
module.h include onto a moduleparam.h include.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14035/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Gortmaker
527581b9cf MIPS: lib: Audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace as needed.

The compiler.h additions are for an implict presence of the
"notrace" which module.h brought in but export.h does not.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14034/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Gortmaker
d9ba577806 MIPS: mm: Audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace as needed.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14033/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Paul Gortmaker
d9d5417755 MIPS: kernel: Audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace as needed.

In the case of the n32/o32 files, we have to get rid of a couple
no-op MODULE_ tags to facilitate the module.h removal.  They piggy
back off the fs/ elf binary support, which is also a bool Kconfig.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14032/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Matt Redfearn
7688c53910 MIPS: smp.c: Introduce mechanism for freeing and allocating IPIs
For the MIPS remote processor implementation, we need additional IPIs to
talk to the remote processor. Since MIPS GIC reserves exactly the right
number of IPI IRQs required by Linux for the number of VPs in the
system, this is not possible without releasing some recources.

This commit introduces mips_smp_ipi_allocate() which allocates IPIs to a
given cpumask. It is called as normal with the cpu_possible_mask at
bootup to initialise IPIs to all CPUs. mips_smp_ipi_free() may then be
used to free IPIs to a subset of those CPUs so that their hardware
resources can be reused.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Lisa Parratt <Lisa.Parratt@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-remoteproc@vger.kernel.org
Cc: lisa.parratt@imgtec.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14285/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Matt Redfearn
e710d66683 MIPS: tlb-r4k: If there are wired entries, don't use TLBINVF
When adding a wired entry to the TLB via add_wired_entry, the tlb is
flushed with local_flush_tlb_all, which on CPUs with TLBINV results in
the new wired entry being flushed again.

Behavior of the TLBINV instruction applies to all applicable TLB entries
and is unaffected by the setting of the Wired register. Therefore if
the TLB has any wired entries, fall back to iterating over the entries
rather than blasting them all using TLBINVF.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lisa.parratt@imgtec.com
Cc: Hugh Dickins <hughd@google.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-remoteproc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14283/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
James Hogan
b2ff71718e MIPS: c-r4k: Fix flush_icache_range() for EVA
flush_icache_range() flushes icache lines in a protected fashion for
kernel addresses, however this isn't correct with EVA where protected
cache ops only operate on user addresses, making flush_icache_range()
ineffective.

Split the implementations of __flush_icache_user_range() from
flush_icache_range(), changing the normal flush_icache_range() to use
unprotected normal cache ops.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14156/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
James Hogan
24d1a6e63e MIPS: KVM: Use __local_flush_icache_user_range()
Convert KVM dynamic translation of guest instructions to flush icache
for guest mapped addresses using the new
__local_flush_icache_user_range() API to allow the more generic
flush_icache_range() to be changed to work on kernel addresses only.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14155/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05 01:31:20 +02:00
Linus Torvalds
e46cae4418 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "The new features and main improvements in this merge for v4.9

   - Support for the UBSAN sanitizer

   - Set HAVE_EFFICIENT_UNALIGNED_ACCESS, it improves the code in some
     places

   - Improvements for the in-kernel fpu code, in particular the overhead
     for multiple consecutive in kernel fpu users is recuded

   - Add a SIMD implementation for the RAID6 gen and xor operations

   - Add RAID6 recovery based on the XC instruction

   - The PCI DMA flush logic has been improved to increase the speed of
     the map / unmap operations

   - The time synchronization code has seen some updates

  And bug fixes all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
  s390/con3270: fix insufficient space padding
  s390/con3270: fix use of uninitialised data
  MAINTAINERS: update DASD maintainer
  s390/cio: fix accidental interrupt enabling during resume
  s390/dasd: add missing \n to end of dev_err messages
  s390/config: Enable config options for Docker
  s390/dasd: make query host access interruptible
  s390/dasd: fix panic during offline processing
  s390/dasd: fix hanging offline processing
  s390/pci_dma: improve lazy flush for unmap
  s390/pci_dma: split dma_update_trans
  s390/pci_dma: improve map_sg
  s390/pci_dma: simplify dma address calculation
  s390/pci_dma: remove dma address range check
  iommu/s390: simplify registration of I/O address translation parameters
  s390: migrate exception table users off module.h and onto extable.h
  s390: export header for CLP ioctl
  s390/vmur: fix irq pointer dereference in int handler
  s390/dasd: add missing KOBJ_CHANGE event for unformatted devices
  s390: enable UBSAN
  ...
2016-10-04 14:05:52 -07:00
Linus Torvalds
19fe416532 * Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO
buffers (Thor Thayer)
 
 * Split the memory controller part out of mpc85xx and share it with a
 * new Freescale ARM Layerscape driver (York Sun)
 
 * amd64_edac fixes (Yazen Ghannam)
 
 * Misc cleanups, refactoring and fixes all over the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX80EwAAoJEBLB8Bhh3lVKWwYP/1bbODQ7o+XhO8IaCDffYk30
 8y4WdSnI0/QcP8JbSvFA7y6Zn4L0BbrbYhKLRDAg9c34V2bMaqonCnkDtT6YatUb
 6l0H/hQ/Cah9AOm5PJLYg6O9s+ZBT8zA5b+F2Z9kUsuB6LSnVhp9skNrH6KPlm0U
 4pFaLnHQenQPZbuRCfRxPU49ZuKtBZtQDkJLJlHXwn7e1qZy2Q4tMnnEtsY6U2ea
 t3Hj+F8g+cdoiTQXOceCcOTR8GqDI6szgzn7vpXAGYvljBndszauAkxO7by79jg1
 I8AQfgwoBF5CYL2Q0pzT1maHmmG2sydeRAHIvhmGxiEfFz1abWhriXbS33c32q8a
 iFiVMAUIaSKpB/sB+5w5ymuBctI1mX5EQVW+8Xl2Gxt+olnhdJMocHnvQdYkfsYm
 Ka8LcbaiK6ZQTbs/cIMOc2paE0AFPu5uXKHCPeZlhQAxOBvSPuDAv0+qUB/of5Uq
 1SPidtsTmCI7X2hrdHAH9hLEkSjq68v3kqL5YnZL3H4gA3WohQEmX9ybjk097Kus
 WWEhdi/PSFX0qQKotMUUDuxfNcKI6PZH9p+i2dN6tNCkiTDdb0Eo5lCXN7RVVhvq
 qfE0Fcc4uDzh5MUS5jT58MWpA1cfdu9jbAf2BwFIU/poJcaeqy/SMyzCL+1D2/u6
 dmDAtQbKUUwiltB8QzQd
 =pcI8
 -----END PGP SIGNATURE-----

Merge tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 "A lot of movement in the EDAC tree this time around, coarse summary
  below:

   - Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO
     buffers (Thor Thayer)

   - split the memory controller part out of mpc85xx and share it with a
     new Freescale ARM Layerscape driver (York Sun)

   - amd64_edac fixes (Yazen Ghannam)

   - misc cleanups, refactoring and fixes all over the place"

* tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (37 commits)
  EDAC, altera: Add IRQ Flags to disable IRQ while handling
  EDAC, altera: Correct EDAC IRQ error message
  EDAC, amd64: Autoload module using x86_cpu_id
  EDAC, sb_edac: Remove NULL pointer check on array pci_tad
  EDAC: Remove NO_IRQ from powerpc-only drivers
  EDAC, fsl_ddr: Fix error return code in fsl_mc_err_probe()
  EDAC, fsl_ddr: Add entry to MAINTAINERS
  EDAC: Move Doug Thompson to CREDITS
  EDAC, I3000: Orphan driver
  EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul()
  EDAC, layerscape: Add Layerscape EDAC support
  EDAC, fsl_ddr: Fix IRQ dispose warning when module is removed
  EDAC, fsl_ddr: Add support for little endian
  EDAC, fsl_ddr: Add missing DDR DRAM types
  EDAC, fsl_ddr: Rename macros and names
  EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx
  EDAC, mpc85xx: Replace printk() with pr_* format
  EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1
  EDAC, altera: Rename MC trigger to common name
  EDAC, altera: Rename device trigger to common name
  ...
2016-10-04 12:06:26 -07:00
Linus Torvalds
5617c122e6 The core clk framework changes are small again. They're mostly minor fixes
that weren't causing enough problems (or any problems when we're just
 clarifying things) to warrant sending outside the merge window. The
 majority of changes are in drivers for various SoCs. Full details
 are in the logs, but here's the summary.
 
 Core:
 
  - Better support for DeviceTree overlays with the addition of the
    CLK_OF_DECLARE_DRIVER macro. Now we won't probe a clk driver
    for a device node that matched during of_clk_init(), unless
    the driver uses CLK_OF_DECLARE_DRIVER instead of CLK_OF_DECLARE.
    This allows overlays to work cleanly for drivers that must probe
    before the device model is ready, and also after it's ready
    when an overlay is loaded.
 
  - Clarification in the code around how clk_hw pointers are returned
    from of clk providers
 
  - Proper migration of prepare/enable counts to parents when the
    clk tree is constructed
 
 New Drivers:
 
  - Socionext's UniPhier SoCs
  - Loongson1C
  - ZTE ZX296718
  - Qualcomm MDM9615
  - Amlogic GXBB AO clocks and resets
  - Broadcom BCM53573 ILP
  - Maxim MAX77620
 
 Updates:
 
  - Four Allwinner SoCs are migrated to the new style clk driver (A31, A31s,
    A23 and A33)
  - Exynos 5xxx audio and DRAM clks
  - Loongson1B AC97, DMA and NAND clks
  - Rockchip DDR clks and rk3399 driver tweaks
  - Renesas R-Car M3-W (r8a7796) SoC SDHI interface and Watchdog timer clks
  - Renasas R-Car H3 and M3-W CMT clks and RAVB+Thermal clks for M3-W
  - Amlogic GXBB MMC gate clks
  - at91 sama5d4 sckc
  - Removal of STiH415 and STiH416 clk support as the SoC is being removed
  - Rework of STiH4xx clk support for new style bindings
  - Continuation of driver migration to clk_hw based registration APIs
  - xgene PMD support
  - bcm2835 critical clk markings
  - ARM versatile ICST
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJX8v/WAAoJEK0CiJfG5JUl0YsQAJr91iV+yHQJAML1BS+nQO9T
 NMbGx/7Pmi2E2S7d62BtQO1kw4zFUX1rURfoTKWfB7vTfHLm1zs5S6MSLxayEr34
 S3PCheFxPQY7OuzCfDFhMeavDha0bZ2jha7IHdshZndA/ZwYX3ghyHFEQf0rzRE+
 HJ3+TGYijXi+/3dyM95HJrZ5A91cJhqhzmSfCvAG/cJgPDHkM8lDvhmNfiO+b4WX
 0BLM+OQj3m5Ob7AXV8L2M3/CELKBzf8gZlDYP4b8LT5xc5P+225UevWQnFpJ6BWt
 32ANz5Wc3MRJw7db4/A5aR/UNCaZZCfC/Sd8BXrHL+7RuxxnHAGEBPeAH5Pd0ubF
 zn1kZ7fQVvDbqim2S9gw6u7i4YoiYTj1PmQmY3j2iosjGxj2n2RK0zha4Y65b2rV
 CxlW07nKvNOgJH7bfQSazM6RIPpht7uDwKJ9dWb20uzRIOL2t94Msg1eXQvgD9ec
 nBn7wq6yBGlyvgg5s9WBogwUWJyg0wXrhN84q+cjptCqFfXUwR1AKRvS+T2EP2G0
 B4HFw/hvnJqGgv5xBh/jWt9ZyqvLB0cSRMZtTcSMclrCdcECd2PbF4gVKUR99wVH
 ND1fai1/PbLZ4yxuUAuEQ5P866aq6Hj5iEXqe0dGUpA1lZWrYrB+vs/lwADyBcsR
 7//DbP9+dHZFbJDQyiWK
 =NFUB
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk framework updates from Stephen Boyd:
 "The core clk framework changes are small again. They're mostly minor
  fixes that weren't causing enough problems (or any problems when we're
  just clarifying things) to warrant sending outside the merge window.
  The majority of changes are in drivers for various SoCs. Full details
  are in the logs, but here's the summary.

  Core:

   - Better support for DeviceTree overlays with the addition of the
     CLK_OF_DECLARE_DRIVER macro. Now we won't probe a clk driver for a
     device node that matched during of_clk_init(), unless the driver
     uses CLK_OF_DECLARE_DRIVER instead of CLK_OF_DECLARE. This allows
     overlays to work cleanly for drivers that must probe before the
     device model is ready, and also after it's ready when an overlay is
     loaded.

   - Clarification in the code around how clk_hw pointers are returned
     from of clk providers

   - Proper migration of prepare/enable counts to parents when the clk
     tree is constructed

  New Drivers:

   - Socionext's UniPhier SoCs
   - Loongson1C
   - ZTE ZX296718
   - Qualcomm MDM9615
   - Amlogic GXBB AO clocks and resets
   - Broadcom BCM53573 ILP
   - Maxim MAX77620

 Updates:

   - Four Allwinner SoCs are migrated to the new style clk driver (A31,
     A31s, A23 and A33)
   - Exynos 5xxx audio and DRAM clks
   - Loongson1B AC97, DMA and NAND clks
   - Rockchip DDR clks and rk3399 driver tweaks
   - Renesas R-Car M3-W (r8a7796) SoC SDHI interface and Watchdog timer
     clks
   - Renasas R-Car H3 and M3-W CMT clks and RAVB+Thermal clks for M3-W
   - Amlogic GXBB MMC gate clks
   - at91 sama5d4 sckc
   - Removal of STiH415 and STiH416 clk support as the SoC is being
     removed
   - Rework of STiH4xx clk support for new style bindings
   - Continuation of driver migration to clk_hw based registration APIs
   - xgene PMD support
   - bcm2835 critical clk markings
   - ARM versatile ICST"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (199 commits)
  CLK: Add Loongson1C clock support
  clk: Loongson1: Make use of GENMASK
  clk: Loongson1: Update clocks of Loongson1B
  clk: Loongson1: Refactor Loongson1 clock
  clk: change the type of clk_hw_onecell_data.num to unsigned int
  clk: zx296718: register driver earlier with core_initcall
  clk: mvebu: dynamically allocate resources in Armada CP110 system controller
  clk: mvebu: fix setting unwanted flags in CP110 gate clock
  clk: nxp: clk-lpc32xx: Unmap region obtained by of_iomap
  clk: mediatek: clk-mt8173: Unmap region obtained by of_iomap
  clk: sunxi-ng: Fix reset offset for the A23 and A33
  clk: at91: sckc: optimize boot time
  clk: at91: Add sama5d4 sckc support
  clk: at91: move slow clock controller clocks to sckc.c
  clk: imx6: initialize GPU clocks
  clk: imx6: fix i.MX6DL clock tree to reflect reality
  clk: imx53: Add clocks configuration
  clk: uniphier: add clock data for UniPhier SoCs
  clk: uniphier: add core support code for UniPhier clock driver
  clk: bcm: Add driver for BCM53573 ILP clock
  ...
2016-10-04 11:04:57 -07:00
Keith Busch
181ffd19cc x86/PCI: VMD: Move VMD driver to drivers/pci/host
Move the driver source and Kconfig to the PCI host bridge drivers directory
and move the config option to a more appropriate sub-menu instead of
occupying the top-level location.

Update the Kconfig option with the X86_64 dependency that was implicitly
included from the previous location, and add information about the module
name when built as a loadable module.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jon Derrick <jonathan.derrick@intel.com>
2016-10-04 12:26:37 -05:00
James Hogan
d99a043a9a MIPS: uprobes: Flush icache via kernel address
Update arch_uprobe_copy_ixol() to use the kmap_atomic() based kernel
address to flush the icache with flush_icache_range(), rather than the
user mapping. We have the kernel mapping available anyway and this
avoids having to switch to using the new __flush_icache_user_range() for
the sake of Enhanced Virtual Addressing (EVA) where flush_icache_range()
will become ineffective on user addresses.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14154/
Patchwork: https://patchwork.linux-mips.org/patch/14308/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
James Hogan
8e3a9f4c3a MIPS: cacheflush: Use __flush_icache_user_range()
The cacheflush(2) system call uses flush_icache_range() to flush a range
of usermode addresses from the icache, so change it to utilise the new
__flush_icache_user_range() API to allow the more generic
flush_icache_range() to be changed to work on kernel addresses only.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14153/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
James Hogan
01882b4d5e MIPS: c-r4k: Split user/kernel flush_icache_range()
flush_icache_range() is used for both user addresses (i.e.
cacheflush(2)), and kernel addresses (as the API documentation
describes).

This isn't really suitable however for Enhanced Virtual Addressing (EVA)
where cache operations on usermode addresses must use a different
instruction, and the protected cache ops assume user addresses, making
flush_icache_range() ineffective on kernel addresses.

Split out a new __flush_icache_user_range() and
__local_flush_icache_user_range() for users which actually want to flush
usermode addresses (note that flush_icache_user_range() already exists
on various architectures but with different arguments).

The implementation of flush_icache_range() will be changed in an
upcoming commit to use unprotected normal cache ops so as to always work
on the kernel mode address space.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14152/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
James Hogan
d260d97e64 MIPS: c-r4k: Drop bc_wback_inv() from icache flush
The EVA conditional bc_wback_inv() at the end of flush_icache_range() to
flush the modified code all the way back to RAM was apparently there for
debug purposes and to accommodate the Malta EVA configuration which
makes use of a physical alias, and didn't use the CP0_EBase.WG (Write
Gate) bit to put the exception vector in the same physical alias where
the exception vector code is written and is being flushed.

Now that CP0_EBase.WG is used, lets drop this flush.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14151/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Matt Redfearn
4b22c693e3 MIPS: traps: Ensure full EBase is written
On CPUs which support the EBase WG (write gate) flag, the most
significant bits of the exception base can be changed. Firmware running
on a VP(E) using MIPS rproc may change EBase to point into the user
segment where the firmware is located such that it can service
interrupts. When control is transferred back to the kernel the EBase
must be switched back into the kernel segment, such that the kernel's
exception vectors are used.

Similarly when vectored interrupts (vint) or vectored external interrupt
controllers (veic) are enabled an exception vector is allocated from
bootmem, and written to the EBase register. Due to the WG flag being
clear, only bits 29:12 will be written. Asside from the rproc case above
this is normally fine (as it will usually be a low allocation within the
KSeg0 range, however when Enhanced Virtual Addressing (EVA) is enabled
the allocation may be outside of the traditional KSeg0/KSeg1 address
range, resulting in the wrong EBase being written.

Correct both cases (configure_exception_vector() for the boot CPU, and
per_cpu_trap_init() for secondary CPUs) to write EBase with the WG flag
first if supported.

On the Malta EVA configuration, KSeg0 is mapped to physical address 0,
and memory is allocated from the KUSeg segment which is mapped to
physical address 0x80000000, which physically aliases the RAM at 0. This
only worked due to the exception base address aliasing the same
underlying RAM that was written to & cache flushed, and due to
flush_icache_range() going beyond the call of duty and flushing from the
L2 cache too (due to the differing physical addresses).

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14150/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
James Hogan
c195e079e9 MIPS: traps: Convert ebase to KSEG0
When allocating boot memory for the exception vector when vectored
interrupts (vint) or vectored external interrupt controllers (veic) are
enabled, try to ensure that the virtual address resides in KSeg0 (and
WARN should that not be possible).

This will be helpful on MIPS64 cores supporting the CP0_EBase Write Gate
(WG) bit once we start using the WG bit to write the full ebase into
CP0_EBase, as we ideally need to avoid hitting the architecturally
poorly defined exception base for Cache Errors when CP0_EBase is in
XKPhys.

An exception is made for Enhanced Virtual Addressing (EVA) kernels which
allow segments to be rearranged and to become uncached during cache
error handling, making it valid for ebase to be elsewhere.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14149/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
James Hogan
18022894ec MIPS: traps: 64bit kernels should read CP0_EBase 64bit
When reading the CP0_EBase register containing the WG (write gate) bit,
the ebase variable should be set to the full value of the register, i.e.
on a 64-bit kernel the full 64-bit width of the register via
read_cp0_ebase_64(), and on a 32-bit kernel the full 32-bit width
including bits 31:30 which may be writeable.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14148/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Matt Redfearn
4b6401365a MIPS: SMP: Wrap call to mips_cpc_lock_other in mips_cm_lock_other
All calls to mips_cpc_lock_other should be wrapped in
mips_cm_lock_other. This only matters if the system has CM3 and is using
cpu idle, since otherwise a) the CPC lock is sufficent for CM < 3 and b)
any systems with CM > 3 have not been able to use cpu idle until now.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Qais Yousef <qsyousef@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/14227/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Matt Redfearn
7745199723 MIPS: pm-cps: Support CM3 changes to Coherence Enable Register
MIPS CM3 changed the management of coherence. Instead of a coherence
control register with a bitmask of coherent domains, CM3 simply has a
coherence enable register with a single bit to enable coherence of the
local core. Support this by clearing and setting this single bit to
disable / enable coherence.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Tony Wu <tung7970@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nikolay Martynov <mar.kolya@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14226/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Matt Redfearn
929d4f51e6 MIPS: pm-cps: Add MIPSr6 CPU support
This patch adds support for CPUs implementing the MIPSr6 ISA to the CPS
power management code. Three changes are necessary:

1. In MIPSr6, coupled coherence is necessary when CPUS implement multiple
   Virtual Processors (VPs).

2. MIPSr6 virtual processors are more like real cores and cannot yield
   to other VPs on the same core, so drop the MT ASE yield instruction.

3. To halt a MIPSr6 VP, the CPC VP_STOP register is used rather than the
   MT ASE TCHalt CP0 register.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14225/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Matt Redfearn
15ea26cf51 MIPS: pm-cps: Remove selection of sync types
Instead of selecting an implementation or vendor specific sync type for
the required sync operations, always use the architecturally mandated
sync types which previous patches have put in place. The selection of
special sync types is now redundant an can be removed.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14223/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Matt Redfearn
90b084b1bc MIPS: pm-cps: Use MIPS standard completion barrier
SYNC type 0 is defined in the MIPS architecture as a completion barrier
where all loads/stores in the pipeline before the sync instruction must
complete before any loads/stores subsequent to the sync instruction.

In places where we require loads / stores be globally completed, use the
standard completion sync stype.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14224/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Matt Redfearn
85e540be75 MIPS: pm-cps: Use MIPS standard lightweight ordering barrier
Since R2 of the MIPS architecture, SYNC(0x10) has been an optional but
architecturally defined ordering barrier. If a CPU does not implement it,
the arch specifies that it must fall back to SYNC(0).

In places where we require that the instruction stream not be reordered,
but do not require that loads / stores are gloablly completed, use the
defined standard sync stype.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14221/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Matt Redfearn
6622ada354 MIPS: Barrier: Add definitions of SYNC stype values
Add the definitions of sync stype 0 (global completion barrier) and sync
stype 0x10 (local ordering barrier) to barrier.h for use with the sync
instruction.

These types are defined by the MIPS Instruction Set since R2 of the
architecture and are documented in document MD00087 table 6.5.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14222/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Matt Redfearn
f6b43d9354 MIPS: pm-cps: Update comments on barrier instructions
This code makes large use of barriers, which had quite vague
descriptions. Update the comments to make the choice of barrier and
reason for it more clear.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14220/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Matt Redfearn
b97d0b9099 MIPS: pm-cps: Change FSB workaround to CPU blacklist
The check for whether a CPU required the FSB flush workaround
previously required every CPU not requiring it to be whitelisted. That
approach does not scale well as new CPUs are introduced so change the
default from a WARN and returning an error to just returning 0. Any CPUs
requiring the workaround can then be added to the blacklist.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14218/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Matt Redfearn
d621942048 MIPS: CPC: Avoid lock when MIPS CM >= 3 is present
MIPS CM version 3 removed the CPC_CL_OTHER register and instead the
CM_CL_OTHER register is used to redirect the CPC_OTHER region. As such,
we should not write the unimplmented register and can avoid the
spinlock as well.
These lock functions should aleady be called within the context of a
mips_cm_{lock,unlock}_other pair ensuring the correct CPC_OTHER region
will be accessed.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14219/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Matt Redfearn
6b89d22e74 MIPS: CPC: Convert bare 'unsigned' to 'unsigned int'
Checkpatch complains about use of bare unsigned type.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14217/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Aaro Koskinen
e6e5b7b6d0 MIPS: Octeon: Fix PCI interrupt routing on D-Link DSR-500N.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14250/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Aaro Koskinen
6fcdc71735 MIPS: Octeon: Add DTS for D-Link DSR-500N.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14249/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00
Aaro Koskinen
1491eaf970 MIPS: Octeon: Split dlink_dsr-1000n.dts to allow reuse with D-Link DSR-500N.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14248/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04 16:13:57 +02:00