Commit graph

40,207 commits

Author SHA1 Message Date
Ralf Baechle
7e9e05cad9 MIPS: IP22: Fix hang in power button interrupt handler
The hang was caused by the use of disable_irq() from the interrupt handler
itself.  Fixed by the use of disable_irq_nosync().  The issue was
triggered by:

    commit 3aa551c9b4
    Author: Thomas Gleixner <tglx@linutronix.de>
    Date:   Mon Mar 23 18:28:15 2009 +0100

        genirq: add threaded interrupt handler support

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-20 18:53:13 +01:00
Andrew Randrianasulu
950312ce22 MIPS: IP32: Fix hang on shutdown in power button interrupt handler.
The hang was caused by the use of disable_irq() from the interrupt handler
itself.  Fixed by the use of disable_irq_nosync().  The issue was
triggered by:

    commit 3aa551c9b4
    Author: Thomas Gleixner <tglx@linutronix.de>
    Date:   Mon Mar 23 18:28:15 2009 +0100

        genirq: add threaded interrupt handler support

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-05-20 18:53:13 +01:00
Krzysztof Hałasa
a6a9fb857b IXP4xx: Add support for the second half of the 64 hardware queues.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-20 15:27:07 +02:00
Thomas Gleixner
521c180874 Merge branch 'core/urgent' into core/futexes
Merge reason: this branch was on an pre -rc1 base, merge it up to -rc6+
              to get the latest upstream fixes.

Conflicts:
	kernel/futex.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-20 09:02:28 +02:00
Paul Mundt
62669e61a5 sh: mach-hp6xx: Fix up the hp6xx build for hd64461 changes.
Fixes several compile errors due to the recent hd64461 I/O base changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-20 11:27:13 +09:00
Daniel Ribeiro
ff71338ed3 [ARM] pxa/ezx: fix pin configuration for low power mode
Fix LPM configuration on ezx.c

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-20 09:51:44 +08:00
Magnus Lilja
2b0c3677bf i.MX31: Add support for LAN9217 on PDK debug board.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-19 21:04:41 +02:00
Linus Torvalds
279e677faa Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix kind-of-intr checking against number of interrupts
  microblaze: Update Microblaze defconfig
2009-05-19 11:31:56 -07:00
Yinghai Lu
4c6f18fc81 x86, io-apic: Don't mark pin_programmed early
Peter bisected that:

| commit b9c61b7007
| Date:   Wed May 6 10:10:06 2009 -0700
|
|     x86/pci: update pirq_enable_irq() to setup io apic routing
|
|     So we can set io apic routing only when enabling the device irq.

wrecked his opteron box, ata1 interrupts fail to get through.

ata1 is using irq 11:

[    1.451839] sata_svw 0000:01:0e.0: version 2.3
[    1.456333] sata_svw 0000:01:0e.0: PCI INT A -> GSI 11 (level, low) -> IRQ 11
[    1.463639] scsi0 : sata_svw
[    1.466949] scsi1 : sata_svw
[    1.470022] scsi2 : sata_svw
[    1.473090] scsi3 : sata_svw
[    1.476112] ata1: SATA max UDMA/133 mmio m8192@0xff3fe000 port 0xff3fe000 irq 11
[    1.483490] ata2: SATA max UDMA/133 mmio m8192@0xff3fe000 port 0xff3fe100 irq 11
[    1.490870] ata3: SATA max UDMA/133 mmio m8192@0xff3fe000 port 0xff3fe200 irq 11
[    1.498247] ata4: SATA max UDMA/133 mmio m8192@0xff3fe000 port 0xff3fe300 irq 11

that pin is overlapped with pin with legacy ones.

We should not set bits in pin_programmed here, so that those bit could
be set later via io_apic_set_pci_routing().

[ Impact: fix boot hang on certain systems ]

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org>
Tested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jack Steiner <steiner@sgi.com>
LKML-Reference: <4A119990.9020606@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-19 14:26:51 +02:00
Jaswinder Singh Rajput
4aee2ad461 x86: asm/processor.h: remove double declaration
Remove double declaration of:

 extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
 extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
 extern unsigned short num_cache_leaves;

they are already defined in the same file.

[ Impact: cleanup ]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
LKML-Reference: <1242733021.3377.1.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-19 14:16:24 +02:00
Alberto Panizzo
5e9145edcc Atmark Armadillo 500 board support.
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-19 11:24:57 +02:00
Kumar Gala
54c181935d powerpc/fsl: Setup PCI inbound window based on actual amount of memory
Previouslly we just always set the inbound window to 2G.  This was
broken for systems with >2G.  If a system has >=4G we will need
SWIOTLB support to handle that case.

We now allocate PCICSRBAR/PEXCSRBAR right below the lowest PCI outbound
address for MMIO or the 4G boundary (if the lowest PCI address is above
4G).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:44 -05:00
Kumar Gala
01af9507ff powerpc/85xx: Add P2020DS board support
The P2020 is a dual e500v2 core based SOC with:
* 3 PCIe controllers
* 2 General purpose DMA controllers
* 2 sRIO controllers
* 3 eTSECS
* USB 2.0
* SDHC
* SPI, I2C, DUART
* enhanced localbus
* and optional Security (P2020E) security w/XOR acceleration

The p2020 DS reference board is pretty similar to the existing MPC85xx
DS boards and has a ULI 1575 connected on one of the PCIe controllers.

Signed-off-by: Ted Peters <Ted.Peters@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:43 -05:00
Li Yang
186e74b9c5 powerpc/fsl_rio: use LAW address from device tree
Instead of fixed address in old code.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:40 -05:00
Kumar Gala
fc274a1569 powerpc/fsl_rio: Fix compile warnings
We we build with resource_size_t as a 64-bit quantity we get:

arch/powerpc/sysdev/fsl_rio.c: In function 'fsl_rio_setup':
arch/powerpc/sysdev/fsl_rio.c:1029: warning: format '%08x' expects type 'unsigned int', but argument 4 has type 'resource_size_t'
arch/powerpc/sysdev/fsl_rio.c:1029: warning: format '%08x' expects type 'unsigned int', but argument 5 has type 'resource_size_t'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:39 -05:00
Kumar Gala
558ab30890 powerpc/8xxx: Update PCI outbound window addresses for 36-bit configs
In these configuration we expect to have large amounts of memory (> 4G)
and thus will bounce via swiotlb some region of PCI address space.

The outbound windows were wasting 512M of address space by leaving a
gap between the top of the outbound window and the 4G boundary.  By
moving the top of the outbound window up to the 4G boundary we can
reclaim the vast majority of the 512M (minus space needed for PEXCSRBAR)
and thus reduces the amount of memory we have to bounce.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:38 -05:00
Kumar Gala
3da34aae03 powerpc/fsl: Support unique MSI addresses per PCIe Root Complex
Its feasible based on how the PCI address map is setup that the region
of PCI address space used for MSIs differs for each PHB on the same SoC.

Instead of assuming that the address mappes to CCSRBAR 1:1 we read
PEXCSRBAR (BAR0) for the PHB that the given pci_dev is on.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:38 -05:00
Kumar Gala
12ac426f88 powerpc/85xx: Add MSI nodes for MPC8568/9 MDS systems
The MPC8568/9 chips support MSIs on PCIe so no reason not to enable them.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:37 -05:00
Anton Vorontsov
bd78c33a09 powerpc/85xx: Add STMicro M25P40 serial flash support for MPC8569E-MDS
For serial flash support we need to:

- Add QE Par IO Bank E device tree node, a GPIO from this bank is
  used for SPI chip-select line;
- Add serial-flash node;
- Add proper module alias into of/base.c.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:35 -05:00
Anton Vorontsov
5e8306fe5d powerpc/85xx: Enable Serial RapidIO for MPC85xx MDS boards
Select HAS_RAPIDIO symbol and add rio nodes for MPC8568E-MDS
and MPC8569E-MDS boards.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:34 -05:00
Anton Vorontsov
28da456a48 powerpc/85xx: Add eSDHC support for MPC8569E-MDS boards
Note that eSDHC and DUART0 are mutually exclusive on MPC8569E-MDS
boards. Default option is DUART0, so eSDHC is disabled by default.
U-Boot will fixup device tree if eSDHC should be used instead of
DUART0.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:33 -05:00
Anton Vorontsov
ea38f579d5 powerpc/85xx: Fix reg & interrupts for mpc8569emds localbus added NAND
This patch fixes bogus reg = <> property in the localbus node,
and fixes interrupt property (should be "interrupts").

Also add node for NAND support.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:32 -05:00
Anton Vorontsov
cd7e4a2cbb powerpc/85xx: Fix mpc8569emds crypto node to include SNOW unit
fsl,exec-units-mask should be 0xbfe to include SNOW unit in
MPC8569E's security engine.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:31 -05:00
Anton Vorontsov
bfa568d19a powerpc/85xx: Add PCI IDs for MPC8569 family processors
This patch adds PCI IDs for MPC8569 and MPC8569E processors,
plus adds appropriate quirks for these IDs, and thus makes
PCI-E actually work on MPC8569E-MDS boards.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:30 -05:00
Kumar Gala
b1b6802586 powerpc/fsl: Removed reg property from 85xx/86xx soc node
Between the addition of the ecm/mcm law nodes and the fact that the
get_immrbase() has been using the range property of the SoC to determine
the base address of CCSR space we no longer need the reg property at
the soc node level.  It has been ill specified and varied between device
trees to cover either the {e,m}cm-law node, some odd subset of CCSR
space or all of CCSR space.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:29 -05:00
Haiying Wang
01b14a906b powerpc/qe: add new qe properties for QE based chips
Add fsl,qe-num-riscs and fsl,qe-num-snums to all the devices trees which
have qe node.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:28 -05:00
Haiying Wang
4b3b42b38a powerpc/85xx: Add MPC8569MDS board support
The MPC8569 is similiar to the MPC8568.  It doubles the number of
QUICC Engine RISC cores from 2 to 4.  Removes eTSECs, TLU and adds
the eSDHC controller.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:26 -05:00
Haiying Wang
98ca77af23 powerpc/qe: update QE Serial Number
The latest QE chip may have more Serial Number(SNUM)s of thread to use. We
will get the number of SNUMs from device tree by reading the new property
"fsl,qe-num-snums", and set 28 as the default number of SNUMs so that it is
compatible with the old QE chips' device trees which don't have this new
property. The macro QE_NUM_OF_SNUM is defined as the maximum number in QE
snum table which is 256.

Also we update the snum_init[] array with 18 more new SNUMs which are
confirmed to be useful on new chip.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:24 -05:00
Haiying Wang
06c4435021 powerpc/qe: update risc allocation for QE
Change the RISC allocation to macros instead of enum, add function to read
the number of risc engines from the new property "fsl,qe-num-riscs" under
the qe node in dts. Add new property "fsl,qe-num-riscs" description in
qe.txt

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:22 -05:00
Haiying Wang
ea5130dcb4 powerpc/85xx: clean up for mpc8568_mds name
Keep an unique machine def for the MPC8568 MDS board to handle some
subtle differences between the future MDS board. Also set the bcsrs in
setup_arch() only for mpc8568_mds because other mds has different bcsr
settings.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:21 -05:00
Kumar Gala
1e76dff22c powerpc/86xx: clean up smp init code
Removed the need for asm/mpc86xx.h as it was only used in mpc86xx_smp.c
and just moved the defines it cared about into there.  Also fixed up
the ioremap to only map the one 4k page we need access to and to iounmap
when we are done.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:20 -05:00
Kumar Gala
ca851c783c powerpc/cpm: Remove some cruft code and defines
Kill of some old defines and macros that we no longer use like
CPM_MAP_ADDR and CPM_IRQ_OFFSET.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:47:19 -05:00
Becky Bruce
89d93347d1 powerpc: make dma_window_* in pci_controller struct avail on 32b
Also, convert them to resource_size_t (which is unsigned long
on 64-bit, so it's not a change there).

We will be using these on fsl 32b to indicate the start and size
address of memory that the pci controller can actually reach - this
is needed to determine if an address requires bounce buffering.  For
now, initialize them to a standard value; in the near future, the
value will be calculated based on how the inbound windows are
programmed.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Acked-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:22 -05:00
Kumar Gala
da38578048 powerpc/86xx: Add new LAW & MCM device tree nodes for all 86xx systems
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:21 -05:00
Kumar Gala
e1a2289736 powerpc/85xx: Add new LAW & ECM device tree nodes for all 85xx systems
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:19 -05:00
Kumar Gala
81db718d48 powerpc/fsl: use of_iomap() for rstcr mapping
The rstcr register mapping code was written sometime ago before
of_iomap() existed.  We can use it and clean up the code a bit
and get rid of one user of get_immrbase() in the process.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:18 -05:00
Becky Bruce
abd7d4837f powerpc/86xx: Add 36-bit device tree for mpc8641hpcn
The new dts places most of the devices in physical address space
above 32-bits, which allows us to have more than 4GB of RAM present.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:17 -05:00
Kumar Gala
9bf8b2741e powerpc: Refactor board check for PCI quirks on FSL boards with uli1575
Refactor the check to determine if the quirk is applicable to the boards
into one inline function so we only have to change one place to add more
boards that the quirks might be applicable to.

Also removed a warning related to unused temp variable.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:15 -05:00
Kumar Gala
28eac2b74c powerpc/fsl: Remove cell-index from PCI nodes
The cell-index property isn't used on PCI nodes and is ill defined.
Remove it for now and if someone comes up with a good reason and
consistent definition for it we can add it back

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:14 -05:00
Michael Ellerman
e2ff7544e1 powerpc/oprofile: Remove unused dump_pmcs() in FSL oprofile
It's still in the git history if anyone wants it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:13 -05:00
Hiroshi DOYU
69d3a84a64 omap iommu: simple virtual address space management
This patch provides a device drivers, which has a omap iommu, with
address mapping APIs between device virtual address(iommu), physical
address and MPU virtual address.

There are 4 possible patterns for iommu virtual address(iova/da) mapping.

    |iova/			  mapping		iommu_		page
    | da	pa	va	(d)-(p)-(v)		function	type
  ---------------------------------------------------------------------------
  1 | c		c	c	 1 - 1 - 1	  _kmap() / _kunmap()	s
  2 | c		c,a	c	 1 - 1 - 1	_kmalloc()/ _kfree()	s
  3 | c		d	c	 1 - n - 1	  _vmap() / _vunmap()	s
  4 | c		d,a	c	 1 - n - 1	_vmalloc()/ _vfree()	n*

    'iova':	device iommu virtual address
    'da':	alias of 'iova'
    'pa':	physical address
    'va':	mpu virtual address

    'c':	contiguous memory area
    'd':	dicontiguous memory area
    'a':	anonymous memory allocation
    '()':	optional feature

    'n':	a normal page(4KB) size is used.
    's':	multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used.

    '*':	not yet, but feasible.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-05-19 08:23:49 +03:00
Hiroshi DOYU
066aa9c1e3 omap iommu: omap3 iommu device registration
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-05-19 08:23:37 +03:00
David S. Miller
bb803cfbec Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/scsi/fcoe/fcoe.c
2009-05-18 21:08:20 -07:00
Ben Dooks
7a05a2cbd3 [ARM] S3C24XX: GPIO: Change usb-simtec.c to use gpiolib.
Make arch/arm/mach-s3c2410/usb-simtec.c use gpiolib to
manage gpio access.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18 20:20:27 +01:00
Ben Dooks
5233c178d4 [ARM] S3C24XX: GPIO: Fix missing GPIOs in gpiolib
The GPG bank has 16 IOs, not 10. Add the missing GPH bank.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18 20:20:12 +01:00
Ben Dooks
9c0ec95797 [ARM] S3C24XX: GPIO: Move gpiolib initialisation earlier
The arch_initcall() is too late for board initialisation to use
gpiolib when doing their machine specific initilisation via the
.init_machine callback.

Bring the file into line with the s3c64xx implementation and use
the core_initcall() to register the GPIO chips.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18 20:03:23 +01:00
Ben Dooks
373e9644c5 [ARM] S3C24XX: GPIO: Fix error returns from gpio functions
Several GPIO functions have been returning -1 to indicate
an error instead of returning a proper error code. Change
to return -EINVAL for invalid argument(s).

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18 19:40:18 +01:00
Linus Torvalds
3633832770 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Explicit alignment for .data.cacheline_aligned
  powerpc/ps3: Update ps3_defconfig
  powerpc/ftrace: Fix constraint to be early clobber
  powerpc/ftrace: Use pr_devel() in ftrace.c
  powerpc: Do not assert pte_locked for hugepage PTE entries
2009-05-18 10:22:04 -07:00
Rabin Vincent
a93ea9b357 [ARM] 5517/1: integrator: don't put clock lookups in __initdata
Remove the __initdata annotation for the clock lookups, since they
will be needed when loading modules which use clk_get().

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-18 17:43:16 +01:00
Rabin Vincent
982db66352 [ARM] 5518/1: versatile: don't put clock lookups in __initdata
Remove the __initdata annotation for the clock lookups, since they
will be needed when loading modules which use clk_get().

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-18 17:43:06 +01:00