Commit graph

40,207 commits

Author SHA1 Message Date
Jarkko Nikula
6b7bff3169 ARM: OMAP2: Remove defines and resource init for OMAP24XX EAC
There is no anymore legacy driver for OMAP24XX Enhanced Audio Controller
in linux-omap and it was newer in mainline so cleanup these unneeded
defines and initialization code.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23 11:10:48 -07:00
Ladislav Michl
bac5b29fb9 ARM: OMAP1: Fix mmc_set_power GPIO usage
Simple simplification...

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23 11:10:48 -07:00
Ladislav Michl
6a3260755f ARM: OMAP1: Simplify board-h2 MMC setup
Simplify board-h2 MMC setup

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23 11:10:47 -07:00
Ladislav Michl
1748ae0e95 ARM: OMAP: MMC: Remove unused power_pin
Remove unused power_pin

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23 11:10:44 -07:00
Tony Lindgren
ba16ec7cab ARM: OMAP: Remove old dead gpio expander code
This should be done with GPIO calls. Patches against the
mainline tree welcome to add the necessary working functionality
back.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23 11:10:40 -07:00
Santosh Shilimkar
da1b94e6a6 ARM: OMAP: Fix for possible race condition in omap_free_dma()
Fix the possible race condition in omap_free_dma(). Function omap_free_dma()
sets the dev_id = -1 and then accesses the channel afterwards to clear it.
But setting the dev_id=-1 makes the channel available for allocation again.
So it is possible someone else can grab it and results are unpredictable.
To avod this DMA channle is cleared first and then the dev_id = -1 is set.

Thanks to McNeil, Sean <sean.mcneil@ti.com> for ointing out this issue.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-04-23 11:10:40 -07:00
Kevin Hilman
f5c122da54 davinci: add arch_ioremap() which uses existing static mappings
Add arch-specific ioremap() which uses any existing static mappings in
place of doing a new mapping.  From now on, drivers should always use
ioremap() instead of IO_ADDRESS().

In addition, remove the davinci_[read|write]* macros in favor of using
ioremap.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23 09:31:09 -07:00
Kevin Hilman
c5b736d093 davinci: major rework of clock, PLL, PSC infrastructure
This is a significant rework of the low-level clock, PLL and Power
Sleep Controller (PSC) implementation for the DaVinci family.  The
primary goal is to have better modeling if the hardware clocks and
features with the aim of DVFS functionality.

Highlights:
- model PLLs and all PLL-derived clocks
- model parent/child relationships of PLLs and clocks
- convert to new clkdev layer
- view clock frequency and refcount via /proc/davinci_clocks

Special thanks to significant contributions and testing by David
Brownell.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23 09:31:00 -07:00
Kevin Hilman
e653034e66 davinci: add runtime CPU detection support
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23 09:27:59 -07:00
Kevin Hilman
9232fcc999 davinci: add default Kconfig, add HAVE_IDE
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-23 09:27:57 -07:00
Coly Li
f57f2fe2a3 microblaze: add parameter to microblaze_read()
This patch modifies parameter of microblaze_read() from 'void' to 'struct
clocksource *cs', which fixes compile warning for incompatible parameter type.

Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:27:38 +02:00
Michal Simek
993ce24078 microblaze: Use CFLAGS_KERNEL instead of CFLAGS
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:27:35 +02:00
Michal Simek
2921e2bd67 microblaze: Add STATE_SAVE_ARG_SPACE for noMMU kernel too
For noMMU kernel this change nothing bring but this change
helps with MMU synchronization.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:27:33 +02:00
Michal Simek
6dfb79aa11 microblaze: Do not check use_dcache
It is not necessary to check cpuinfo.use_dcache because
this checking is done in function which call that functions

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:27:31 +02:00
Michal Simek
fbeda67782 microblaze: Do not use PVR configuration for broken MB version
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:27:28 +02:00
Michal Simek
79533fd4cb microblaze: Fix USR1/2 pvr printing message
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:18 +02:00
Roel Kluin
6e60c14810 microblaze: iowrite upon timeout
retries reaches -1, so the iowrite occurrs upon timeout.

Acked-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:18 +02:00
Michal Simek
04e3a553e0 microblaze: Correspond CONFIG...PCMP in Makefile/Kconfig
Makefile contained different cpu config flag
than is in Kconfig.auto in platform folder

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:18 +02:00
Michal Simek
6714fcc34e microblaze: Remove redundant variable
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:18 +02:00
Michal Simek
e1c4bd0897 microblaze: Move start_thread to process.c
This change is due to upcomming MMU merge

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:18 +02:00
Michal Simek
df4f3eb7c3 microblaze: Add missing preadv and pwritev syscalls
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:17 +02:00
Michal Simek
ce0b755f7d microblaze: Add missing declaration for die and _exception func
This change remove sparse errors.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:17 +02:00
Michal Simek
bf7e9da4e7 microblaze: Remove sparse error in traps.c
CHECK   arch/microblaze/kernel/traps.c
arch/microblaze/kernel/traps.c:37:47: warning: Using plain integer as NULL pointer
CC      arch/microblaze/kernel/traps.o

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:17 +02:00
Michal Simek
2eba318e0d microblaze: Move task_pt_regs up
This change is important for easier merge with Microblaze MMU code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:17 +02:00
Michal Simek
ac3efab506 microblaze: Rename kernel_mode to pt_mode in pt_regs
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:17 +02:00
Michal Simek
ceb8944b3a microblaze: Remove uncache shadow condition
Uncached shadow feature is not supported in current
kernel code that's why I removed it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:16 +02:00
Michal Simek
51eb6dc9ca microblaze: Remove while(1) loop from show_regs function
I removed it because of show_regs can't break die function.
If process/kernel failed, die (do_exit) function resolve it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:16 +02:00
Michal Simek
f2ec24fd42 microblaze: Remove unneded per cpu SYSCALL_SAVE variable
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23 16:09:16 +02:00
Stephen Rothwell
b62c31ae40 powerpc: fix for long standing bug noticed by gcc 4.4.0
Previous gcc versions didn't notice this because one of the preceding
#ifs always evaluated to true.

gcc 4.4.0 produced this error:

arch/powerpc/mm/tlb_nohash_low.S:206:6: error: #elif with no expression

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-23 08:52:16 -05:00
Kumar Gala
323d23aeac Revert "powerpc: Add support for early tlbilx opcode"
This reverts commit e996557740.  Our HW
guys were able to fix this so it never sees the light of day.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-23 08:51:22 -05:00
Martin Schwidefsky
e655dc8873 [S390] update default configuration.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-23 13:58:18 +02:00
Martin Schwidefsky
e1c805309d [S390] /proc/stat idle field for idle cpus
The cpu idle field in the output of /proc/stat is too small for cpus
that have been idle for more than a tick. Add the architecture hook
arch_idle_time that allows to add the not accounted idle time of a
sleeping cpu without waking the cpu.

The s390 implementation of arch_idle_time uses the already existing
s390_idle_data per_cpu variable to find the sleep time of a neighboring
idle cpu.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-23 13:58:17 +02:00
Gerald Schaefer
b1ad171efa [S390] appldata: avoid deadlock with appldata_mem
The appldata_ops callbacks are called with a spin_lock held. But the
appldata_mem callback then calls all_vm_events(), which calls
get_online_cpus(), which might sleep. This possible deadlock is fixed
by using a mutex instead of a spin_lock.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-23 13:58:17 +02:00
Heiko Carstens
3bd5f3ef29 [S390] ipl: fix compile breakage
Fix this for !CONFIG_SMP:

arch/s390/kernel/ipl.c: In function 'stop_run':
arch/s390/kernel/ipl.c:1461: error: implicit declaration of function 'signal_processor'

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-23 13:58:16 +02:00
Yinghai Lu
4c31e92b97 x86: check boundary in setup_node_bootmem()
Commit dc09855 ("x86/uv: fix init of memory-less nodes") causes a
two sockets system (where node-1 doesn't have RAM installed) to crash.

That commit makes node_possible include cpu nodes that do not have memory.
So check boundary in setup_node_bootmem().

[ Impact: fix boot crash on RAM-less NUMA node system ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Jack Steiner <steiner@sgi.com>
LKML-Reference: <49EF89DF.9090404@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-23 09:58:56 +02:00
Paul Walmsley
c8088112fd OMAP2xxx clock: pre-initialize struct clks early
Commit 3f0a820c4c breaks OMAP2xxx boot
during initial propagate_rate() on osc_ck and sys_ck.  Fix by
pre-initializing all struct clks before running any other clock init
code.  Incorporates review comments from Russell King
<rmk+kernel@arm.linux.org.uk>.

Resolves

<1>Unable to handle kernel NULL pointer dereference at virtual address 00000000
<1>pgd = c0004000
<1>[00000000] *pgd=00000000
Internal error: Oops: 5 [#1]
Modules linked in:
CPU: 0    Not tainted  (2.6.29-omap1 #37)
PC is at propagate_rate+0x10/0x60
LR is at omap2_clk_init+0x30/0x218
...

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-22 19:48:53 -06:00
Greg Ungerer
64f68416e7 m68knommu: update the default config for the ColdFire 5407C3 board
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-04-23 09:23:32 +10:00
Yinghai Lu
b10ceb5530 x86/PCI: don't bother with root quirks if _CRS is used
It will be overwriten later if _CRS is used, so don't bother to set it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 15:06:29 -07:00
Yinghai Lu
0e94ecd098 x86/PCI: set_pci_bus_resources_arch_default cleanups
Rename set_pci_bus_resources_arch_default to x86_pci_root_bus_res_quirks, move
the weak version from common.c to i386.c, and before calling, make sure it's a
root bus.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 14:47:46 -07:00
Matthew Wilcox
0bb1be3e30 x86/PCI: Move set_pci_bus_resources_arch_default into arch/x86
Commit 30a18d6c3f introduced a new
function to set the PCI bus resources.  Unfortunately, neither the
author, nor the committers seemed to know that we already have somewhere
to do that -- pcibios_fixup_bus().  This patch moves the hook (used only
by the K8 code) into x86-specific code where it should have been in the
first place.

Cc: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 13:57:36 -07:00
Yinghai Lu
044cd80942 x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case
e820_all_mapped need end is (addr + size) instead of (addr + size - 1)

Cc: stable@kernel.org
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 13:56:26 -07:00
Andi Kleen
5679af4c16 x86, mce: fix boot logging logic
The earlier patch to change the poller to a separate function subtly
broke the boot logging logic. This could lead to machine checks
getting logged at boot even when disabled or defaulting to off
on some systems. Fix that.

[ Impact: bug fix - avoid spurious MCE in log ]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-04-22 13:56:25 -07:00
Andi Kleen
6298c512bc x86, mce: make polling timer interval per CPU
The polling timer while running per CPU still uses a global next_interval
variable, which lead to some CPUs either polling too fast or too slow.   
This was not a serious problem because all errors get picked up eventually,
but it's still better to avoid it. Turn next_interval into a per cpu variable.

v2: Fix check_interval == 0 case (Hidetoshi Seto)

[ Impact: minor bug fix ]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-04-22 13:54:37 -07:00
Johannes Berg
c1c6b14b22 rfkill: remove deprecated state constants
I only did superficial review, but these constants are stupid
to have and without proper warnings nobody will review the
code anyway, no amount of shouting will help.

Also fix wimax to use correct states.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22 16:54:27 -04:00
Geert Uytterhoeven
adfe7c6989 m68k: Update defconfigs for 2.6.30-rc3
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-04-22 20:55:12 +02:00
Geert Uytterhoeven
cc7c0fa3b9 m68k,m68knommu: Wire up preadv and pwritev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2009-04-22 20:39:49 +02:00
Coly Li
c5428e950a uv_time: add parameter to uv_read_rtc()
uv_read_rtc() is referenced by read member of struct clocksource clocksource_uv.
In include/linux/clocksource.h, read of struct clocksource is declared as:
cycle_t (*read)(struct clocksource *cs)

This got introduced recently in:

   8e19608: clocksource: pass clocksource to read() callback

But arch/x86/kernel/uv_time.c was not properly converted by that pach.

This patch adds a dummy parameter (struct clocksource type) to uv_read_rtc() to
fix the incompatible reference in clocksource_uv, and add a NULL parameter in
all places where uv_read_rtc() gets called.

[ Impact: cleanup, address compiler warning ]

Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Magnus Damm <damm@igel.co.jp>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hugh@veritas.com>
LKML-Reference: <49EF3614.1050806@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Dimitri Sivanich <sivanich@sgi.com>
2009-04-22 17:41:25 +02:00
Greg Ungerer
73fc267615 m68knommu: update the default config for the ColdFire 5307C3 board
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-04-23 00:11:23 +10:00
Andreas Herrmann
7a6f9cbb37 x86: hpet: fix periodic mode programming on AMD 81xx
(See http://bugzilla.kernel.org/show_bug.cgi?id=12961)

It partially reverts commit c23e253e67
(x86: hpet: stop HPET_COUNTER when programming periodic mode)

HPET on AMD 81xx chipset needs a second write (with HPET_TN_SETVAL
cleared) to T0_CMP register to set the period in periodic mode.

With this patch HPET_COUNTER is still stopped but not reset when HPET
is programmed in periodic mode. This should help to avoid races when
HPET is programmed in periodic mode and fixes a boot time hang that
I've observed on a machine when using 1000HZ.

[ Impact: fix boot time hang on machines with AMD 81xx chipset ]

Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Tested-by: Jeff Mahoney <jeffm@suse.com>
LKML-Reference: <20090421180037.GA2763@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-22 15:53:40 +02:00
Greg Ungerer
2d4f9efa2a m68knommu: update the default config for the ColdFire 5257EVB board
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-04-22 23:30:48 +10:00