Commit graph

40,207 commits

Author SHA1 Message Date
Daniel Mack
bac07ecd6c [ARM] pxa: Colibri PXA320 module basics
This adds basic support for Colibri PXA320 modules.
The file colibri-320.c only contains settings specific to this module,
such as the Ethernet interface.

Cc: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 09:59:30 +08:00
Daniel Mack
acb3655973 [ARM] pxa: Refactor Colibri board support code
- Move common function for all Colibri PXA3xx boards to the newly
  added colibri-pxa3xx.c
- Drop some unnecessary defines from colibri.h
- Make Kconfig reflect the fact that code for colibri 300 module does
  also work for the 310 model
- Give up on the huge pin config table which was messed up with lots of
  #ifdefs and switch over to locally defined tables for configured
  functions

Cc: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 09:59:04 +08:00
Daniel Mack
626806d96f [ARM] pxa: Fix Colibri AX88796 configuration
Broaden the AX88796 register mask to allow access to the reset register.
Remove unnecessary value definitions and the second resource block.

Diagnosed-by: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 09:58:48 +08:00
Daniel Mack
71d3615512 [ARM] pxa: add colibri PXA300 defconfig
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 09:57:55 +08:00
Daniel Mack
b1701f1e09 [ARM] pxa: rename and update Colibri PXA270 defconfig
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 09:57:54 +08:00
Daniel Mack
42e07ad7fc [ARM] pxa: add USB support for Colibri PXA300
This adds support for USB OHCI for Toradex' Colibri PXA300 modules as
connected on the evaluation board.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 09:57:54 +08:00
Daniel Mack
ebc046c2a3 [ARM] pxa: add MMC support for Colibri PXA300
Added MMC support for Toradex' Colibri PXA300 module.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 09:57:54 +08:00
Daniel Mack
5fc9f9a1de [ARM] pxa: add basic support for Colibri PXA300 module
This patch add basic support for Toradex' Colibri PXA300 module.
Ethernet is enabled conditionally, depdending on CONFIG_AX88796.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 09:57:54 +08:00
Daniel Mack
5c0dbb8fc2 [ARM] pxa: rename colibri.c to colibri-pxa270.c
Namespace cleanup: rename colibri.c to colibri-pxa270.c and change
some names in colibri.h.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 09:57:54 +08:00
Eric Miao
fa12868e59 Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git into devel 2009-03-23 09:55:14 +08:00
Daniel Mack
1efb71809f [ARM] pxa: add pxa320 missing pin function for CS2 on GPIO3
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 09:53:33 +08:00
Jaswinder Singh Rajput
a1e38ca5ce x86: apic/io_apic.c define msi_ir_chip and ir_ioapic_chip all the time
move out msi_ir_chip and ir_ioapic_chip from CONFIG_INTR_REMAP shadow

Fix:
 arch/x86/kernel/apic/io_apic.c:1431: warning: ‘msi_ir_chip’ defined but not used

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-23 02:11:25 +05:30
Jaswinder Singh Rajput
474e56b82c x86: irq.c keep CONFIG_X86_LOCAL_APIC interrupts together
Impact: cleanup

keep CONFIG_X86_LOCAL_APIC interrupts together to avoid extra ifdef

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-23 02:08:34 +05:30
Jaswinder Singh Rajput
ce2d8bfd44 x86: irq.c use same path for show_interrupts
Impact: cleanup

SMP and !SMP will use same path for show_interrupts

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-23 02:08:00 +05:30
Jaswinder Singh Rajput
f2362e6f1b x86: cpu/cpu.h cleanup
Impact: cleanup

 - Fix various style issues

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-23 02:06:51 +05:30
Linus Torvalds
39678e5e38 Merge branch 'fix-includes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
* 'fix-includes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: merge the non-MMU and MMU versions of siginfo.h
  m68k: use the MMU version of unistd.h for all m68k platforms
  m68k: merge the non-MMU and MMU versions of signal.h
  m68k: merge the non-MMU and MMU versions of ptrace.h
  m68k: use MMU version of setup.h for both MMU and non-MMU
  m68k: merge the non-MMU and MMU versions of sigcontext.h
  m68k: merge the non-MMU and MMU versions of swab.h
  m68k: merge the non-MMU and MMU versions of param.h
2009-03-22 11:38:57 -07:00
Dmitri Vorobiev
1cc185211a x86: Fix a couple of sparse warnings in arch/x86/kernel/apic/io_apic.c
Impact: cleanup

This patch fixes the following sparse warnings:

 arch/x86/kernel/apic/io_apic.c:3602:17: warning: symbol 'hpet_msi_type'
 was not declared. Should it be static?

 arch/x86/kernel/apic/io_apic.c:3467:30: warning: Using plain integer as
 NULL pointer

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
LKML-Reference: <1237741871-5827-2-git-send-email-dmitri.vorobiev@movial.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 18:15:14 +01:00
Lennert Buytenhek
e84665c9cb dsa: add switch chip cascading support
The initial version of the DSA driver only supported a single switch
chip per network interface, while DSA-capable switch chips can be
interconnected to form a tree of switch chips.  This patch adds support
for multiple switch chips on a network interface.

An example topology for a 16-port device with an embedded CPU is as
follows:

	+-----+          +--------+       +--------+
	|     |eth0    10| switch |9    10| switch |
	| CPU +----------+        +-------+        |
	|     |          | chip 0 |       | chip 1 |
	+-----+          +---++---+       +---++---+
	                     ||               ||
	                     ||               ||
	                     ||1000baseT      ||1000baseT
	                     ||ports 1-8      ||ports 9-16

This requires a couple of interdependent changes in the DSA layer:

- The dsa platform driver data needs to be extended: there is still
  only one netdevice per DSA driver instance (eth0 in the example
  above), but each of the switch chips in the tree needs its own
  mii_bus device pointer, MII management bus address, and port name
  array. (include/net/dsa.h)  The existing in-tree dsa users need
  some small changes to deal with this. (arch/arm)

- The DSA and Ethertype DSA tagging modules need to be extended to
  use the DSA device ID field on receive and demultiplex the packet
  accordingly, and fill in the DSA device ID field on transmit
  according to which switch chip the packet is heading to.
  (net/dsa/tag_{dsa,edsa}.c)

- The concept of "CPU port", which is the switch chip port that the
  CPU is connected to (port 10 on switch chip 0 in the example), needs
  to be extended with the concept of "upstream port", which is the
  port on the switch chip that will bring us one hop closer to the CPU
  (port 10 for both switch chips in the example above).

- The dsa platform data needs to specify which ports on which switch
  chips are links to other switch chips, so that we can enable DSA
  tagging mode on them.  (For inter-switch links, we always use
  non-EtherType DSA tagging, since it has lower overhead.  The CPU
  link uses dsa or edsa tagging depending on what the 'root' switch
  chip supports.)  This is done by specifying "dsa" for the given
  port in the port array.

- The dsa platform data needs to be extended with information on via
  which port to reach any given switch chip from any given switch chip.
  This info is specified via the per-switch chip data struct ->rtable[]
  array, which gives the nexthop ports for each of the other switches
  in the tree.

For the example topology above, the dsa platform data would look
something like this:

	static struct dsa_chip_data sw[2] = {
		{
			.mii_bus	= &foo,
			.sw_addr	= 1,
			.port_names[0]	= "p1",
			.port_names[1]	= "p2",
			.port_names[2]	= "p3",
			.port_names[3]	= "p4",
			.port_names[4]	= "p5",
			.port_names[5]	= "p6",
			.port_names[6]	= "p7",
			.port_names[7]	= "p8",
			.port_names[9]	= "dsa",
			.port_names[10]	= "cpu",
			.rtable		= (s8 []){ -1, 9, },
		}, {
			.mii_bus	= &foo,
			.sw_addr	= 2,
			.port_names[0]	= "p9",
			.port_names[1]	= "p10",
			.port_names[2]	= "p11",
			.port_names[3]	= "p12",
			.port_names[4]	= "p13",
			.port_names[5]	= "p14",
			.port_names[6]	= "p15",
			.port_names[7]	= "p16",
			.port_names[10]	= "dsa",
			.rtable		= (s8 []){ 10, -1, },
		},
	},

	static struct dsa_platform_data pd = {
		.netdev		= &foo,
		.nr_switches	= 2,
		.sw		= sw,
	};

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:06:54 -07:00
Ingo Molnar
648340dff0 Merge branch 'x86/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/linux-2.6-tip into x86/cleanups 2009-03-21 17:37:35 +01:00
Jeremy Fitzhardinge
45c7b28f3c Revert "x86: create a non-zero sized bm_pte only when needed"
This reverts commit 698609bdcd.

69860 breaks Xen booting, as it relies on head*.S to set up the fixmap
pagetables (as a side-effect of initializing the USB debug port).
Xen, however, does not boot via head*.S, and so the fixmap area is
not initialized.

The specific symptom of the crash is a fault in dmi_scan(), because
the pointer that early_ioremap returns is not actually present.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49C43A8E.5090203@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-21 17:11:41 +01:00
Herbert Xu
949abe5747 crypto: sha512-s390 - Add missing block size
I missed the block size when converting sha512-s390 to shash.

Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-03-21 21:12:19 +08:00
Jaswinder Singh Rajput
1894e36754 x86: pci-nommu.c cleanup
Impact: cleanup

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-21 17:01:25 +05:30
Jaswinder Singh Rajput
d53a444460 x86: io_delay.c cleanup
Impact: cleanup

 - fix header file issues

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-21 16:57:04 +05:30
Jaswinder Singh Rajput
8383d821e7 x86: rtc.c cleanup
Impact: cleanup

 - fix various style problems
  - fix header file issues

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-21 16:56:37 +05:30
Jaswinder Singh Rajput
c8344bc218 x86: i8253 cleanup
Impact: cleanup

 - fix various style problems
  - fix header file issues

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-21 16:56:10 +05:30
Jaswinder Singh Rajput
390cd85c8a x86: kdebugfs.c cleanup
Impact: cleanup

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-21 16:55:45 +05:30
Jaswinder Singh Rajput
271eb5c588 x86: topology.c cleanup
Impact: cleanup

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-21 16:55:24 +05:30
Daniel Silverstone
4731f8b66d [ARM] 5428/1: Module relocation update for R_ARM_V4BX
It would seem when building kernel modules with modern binutils
(required by modern GCC) for ARM v4T targets (specifically observed
with the Samsung 24xx SoC which is an 920T) R_ARM_V4BX relocations
are emitted for function epilogues.

This manifests at module load time with an "unknown relocation: 40"
error message.

The following patch adds the R_ARM_V4BX relocation to the ARM kernel
module loader. The relocation operation is taken from that within the
binutils bfd library.

Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Vincent Sanders <vince@simtec.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-21 11:22:33 +00:00
Jaswinder Singh Rajput
0b3ba0c3cc x86: mpparse.c introduce check_physptr helper function
To reduce the size of the oversized function __get_smp_config()

There should be no impact to functionality.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-21 14:15:43 +05:30
Jaswinder Singh Rajput
5a5737eac2 x86: mpparse.c introduce smp_dump_mptable helper function
smp_read_mpc() and replace_intsrc_all() can use same smp_dump_mptable()

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-21 14:15:11 +05:30
Bartlomiej Zolnierkiewicz
04c93ce499 x86: fix IO APIC resource allocation error message
Impact: fix incorrect error message

- IO APIC resource allocation error message contains one too many "be".

- Print the error message iff there are IO APICs in the system.

I've seen this error message for some time on my x86-32 laptop...

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Alan Bartlett <ajb.stxsl@googlemail.com>
LKML-Reference: <200903202100.30789.bzolnier@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-20 21:02:55 +01:00
Yinghai Lu
068258bc15 x86/PCI: host mmconfig detect clean up
Fix mmconfig detection to not assume a single mmconfig space in the
northbridge, paving the way for AMD fam10h + mcp55 CPUs.  On those, the
MSR has some range, but the mcp55 pci config will have another one.

Also helps the mcp55 + io55 case, where every one will have one range.

If it is mcp55, exclude the range that is used by CPU MSR, in other
words , if the CPU claims busses 0-255, the range in mcp55 is dropped,
because CPU HW will not route those ranges to mcp55 mmconfig to handle
it.

Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 11:40:22 -07:00
Mike Rapoport
f271049e20 [MTD] [NAND] pxa3xx_nand: add ability to keep controller settings defined by OBM/bootloader
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20 18:37:44 +00:00
Ed Swierk
5546d6f568 x86/PCI: Detect mmconfig on nVidia MCP55
Detect and enable memory-mapped PCI configuration space on the nVidia
MCP55 southbridge.  Tested against 2.6.27.4 on an Arista Networks
development board with one MCP55, Coreboot firmware, no ACPI.

Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 11:34:37 -07:00
Atsushi Nemoto
cbf77c1bd9 [MTD] RBTX4939: add MTD support
Add platform support for NOR flash chips on RBTX4939 board.
This board has complex flash mappings, controlled by its DIPSW setting.

[akpm@linux-foundation.org: Use min_t]
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Bächle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20 18:09:54 +00:00
Atsushi Nemoto
a591f5d35e [MTD] [NAND] TXx9: add NDFMC support
Add platform support for NAND Flash Memory Controller of TXx9 SoCs.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-By: Ralf Bächle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20 18:07:39 +00:00
Hiroshi Shimamoto
14fc9fbc70 x86: signal: check signal stack overflow properly
Impact: cleanup

Check alternate signal stack overflow with proper stack pointer.
The stack pointer of the next signal frame is different if that
task has i387 state.

On x86_64, redzone would be included.

No need to check SA_ONSTACK if we're already using alternate signal stack.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Roland McGrath <roland@redhat.com>
LKML-Reference: <49C2874D.3080002@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-20 19:01:31 +01:00
Yinghai Lu
dfadd9edff PCI/x86: detect host bridge config space size w/o using quirks
Many host bridges support a 4k config space, so check them directy
instead of using quirks to add them.

We only need to do this extra check for host bridges at this point,
because only host bridges are known to have extended address space
without also having a PCI-X/PCI-E caps.  Other devices with this
property could be done with quirks (if there are any).

As a bonus, we can remove the quirks for AMD host bridges with family
10h and 11h since they're not needed any more.

With this patch, we can get correct pci cfg size of new Intel CPUs/IOHs
with host bridges.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:17 -07:00
Matthew Wilcox
1c8d7b0a56 PCI MSI: Add support for multiple MSI
Add the new API pci_enable_msi_block() to allow drivers to
request multiple MSI and reimplement pci_enable_msi in terms of
pci_enable_msi_block.  Ensure that the architecture back ends don't
have to know about multiple MSI.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:14 -07:00
Bjorn Helgaas
13bf757669 x86: use dev_printk in quirk message
This patch changes a VIA PCI quirk to use dev_info() rather than printk().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgek.org>
2009-03-20 10:48:10 -07:00
Steve Glendinning
eaeed5d31d sh: add support for SMSC Polaris platform
Polaris is an SMSC reference platform with a SH7709S CPU and LAN9118
ethernet controller.  This patch adds support for it.

Updated following feedback from Nobuhiro Iwamatsu.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-21 01:26:33 +09:00
David Brownell
ff4569c752 [MTD] [NAND] davinci_nand driver
This is a device driver for the NAND flash controller found on the various
DaVinci family chips.  It handles up to four SoC chipselects, and some
flavors of secondary chipselect (e.g.  based on upper bits of the address
bus) as used with some multichip packages.  (Including the 2 GiB chips
used on some TI devel boards.)

The 1-bit ECC hardware is supported (3 bytes ECC per 512 bytes data); but
not yet the newer 4-bit ECC (10 bytes ECC per 512 bytes data), as
available on chips like the DM355 or OMAP-L137 and needed with the more
error-prone MLC NAND chips.

This is a cleaned-up version of code that's been in use for several years
now; sanity checked with the new drivers/mtd/tests.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-20 12:32:19 +00:00
Rafael Ignacio Zurita
3bf509230a sh: fix the HD64461 level-triggered interrupts handling
Rework the hd64461 demuxer code to fix the HD64461 level-triggered
interrupts handling, using handle_level_irq() as needed.

Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-20 18:57:48 +09:00
Magnus Damm
615e73b3cd sh: disallow kexec virtual entry
Older versions of kexec-tools has a zImage loader that
passes a virtual address as entry point. The elf loader
otoh it passes a physical address as entry point, and
pages are always passed as physical addresses as well.

Only allow physical addresses from now on.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-20 18:56:04 +09:00
Heiko Carstens
70f454408e s390: remove arch specific smp_send_stop()
Impact: build fix on s390 !CONFIG_SMP

Remove arch specific smp_send_stop for !CONFIG_SMP since it conflicts
with a new generic version.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
LKML-Reference: <20090320092410.30d2bac3@osiris.boeblingen.de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-20 10:49:42 +01:00
venkatesh.pallipadi@intel.com
0f3507555f x86, CPA: Add set_pages_arrayuc and set_pages_array_wb
Add new interfaces:

  set_pages_array_uc()
  set_pages_array_wb()

that can be used change the page attribute for a bunch of pages with
flush etc done once at the end of all the changes. These interfaces
are similar to existing set_memory_array_uc() and set_memory_array_wc().

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: arjan@infradead.org
Cc: eric@anholt.net
Cc: airlied@redhat.com
LKML-Reference: <20090319215358.901545000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-20 10:34:49 +01:00
venkatesh.pallipadi@intel.com
9ae2847591 x86, PAT: Add support for struct page pointer array in cpa set_clr
Add struct page array pointer to cpa struct and CPA_PAGES_ARRAY.

With that we can add change_page_attr_set_clr() a parameter to pass
struct page array pointer and that can be handled by the underlying
cpa code.

cpa_flush_array() is also changed to support both addr array or
struct page pointer array, depending on the flag.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: arjan@infradead.org
Cc: eric@anholt.net
Cc: airlied@redhat.com
LKML-Reference: <20090319215358.758513000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-20 10:34:48 +01:00
venkatesh.pallipadi@intel.com
728c951887 x86, CPA: Add a flag parameter to cpa set_clr()
Change change_page_attr_set_clr() array parameter to a flag. This helps
following patches which adds an interface to change attr to uc/wb over a
set of pages referred by struct page.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: arjan@infradead.org
Cc: eric@anholt.net
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: airlied@redhat.com
LKML-Reference: <20090319215358.611346000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-20 10:34:47 +01:00
Ingo Molnar
7f00a2495b Merge branches 'x86/cleanups', 'x86/mm', 'x86/setup' and 'linus' into x86/core 2009-03-20 10:34:22 +01:00
Ingo Molnar
44fc6ee923 Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace 2009-03-20 10:15:13 +01:00