Commit graph

40,207 commits

Author SHA1 Message Date
Eric Miao
da065a0b36 [ARM] pxa: move GPIO register definitions into <mach/gpio.h>
This makes gpio.c fully independent of pxa-regs.h (except for the
virtual address of the registers).

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:37 +08:00
Eric Miao
0d9f768fce [ARM] pxa: move pxa_gpio_mode() outside of generic gpio.c
Looks like we have to live with pxa_gpio_mode() for a while, giving
its presence is actually making gpio.c not generic enough, let's
move it temporarily outside before it can be fully purged.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:37 +08:00
Eric Miao
a58fbcd8ad [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c
This is part of the work making gpio.c generic enough, the changes
include:

1. move IRQ handling of GPIO 0 and 1 outside (and back into irq.c)

2. pxa_init_gpio() accepts a range for muxed GPIO IRQs, and an IRQ
   number for the muxed GPIOs

3. __gpio_is_occupied() and __gpio_is_inverted() are made inline,
   and are moved into <mach/gpio.h> instead of generic gpio.c

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:37 +08:00
Eric Miao
7ebc8d56f4 [ARM] pxa: move DMA registers definitions into <mach/dma.h>
1. Driver code where pxa_request_dma() is called will most likely
   reference DMA registers as well,  and it is really unnecessary
   to include pxa-regs.h just for this. Move the definitions into
   <mach/dma.h> and make relevant drivers include it instead of
   <mach/pxa-regs.h>.

2. Introduce DMAC_REGS_VIRT as the virtual address base for these
   DMA registers. This allows later processors to re-use the same
   IP while registers may start at different I/O address.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:36 +08:00
Eric Miao
fef1f99a0c [ARM] pxa: allow DMA controller IRQ being specified
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:36 +08:00
Eric Miao
51c62982a3 [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
Considering the header mess ATM, it is not always possible to include
the correct header files within board code. Let's keep this simple:

  <mach/pxa25x.h>  - for pxa25x based platforms
  <mach/pxa27x.h>  - for pxa27x based platforms
  <mach/pxa300.h>  - for pxa300 based platforms
  <mach/pxa320.h>  - for pxa320 based platforms
  <mach/pxa930.h>  - for pxa930 based platforms

NOTE:

1. one header one board file, they are not compatible (i.e. they have
   conflicting definitions which won't compile if included together).

2. Unless strictly necessary, the following header files are considered
   to be SoC files use _only_, and is not recommended to be included in
   board code:

    <mach/hardware.h>
    <mach/pxa-regs.h>
    <mach/pxa2xx-regs.h>
    <mach/pxa3xx-regs.h>
    <mach/mfp.h>
    <mach/mfp-pxa2xx.h>
    <mach/mfp-pxa25x.h>
    <mach/mfp-pxa27x.h>
    <mach/mfp-pxa3xx.h>
    <mach/mfp-pxa300.h>
    <mach/mfp-pxa320.h>
    <mach/mfp-pxa930.h>

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:36 +08:00
Philipp Zabel
5b079b5ab4 [ARM] pxa/magician: remove unused forward declaration of pasic3
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:35 +08:00
Philipp Zabel
05199ecb7c [ARM] pxa/magician: default to backlight trigger for keypad illumination
Default to the same behaviour as the shipped WinCE system.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:35 +08:00
Philipp Zabel
d942d778b1 [ARM] pxa/magician: register pda_power IRQs as rising/falling edge
so they can be shared with gpio_vbus.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:35 +08:00
Philipp Zabel
d62ab6e26d [ARM] pxa/magician: select PXA_SSP for touchscreen and sound
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:33 +08:00
Philipp Zabel
2380461423 [ARM] pxa/magician: fix htc-egpio resource size
Fixes an off-by-one error.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:33 +08:00
Eric Miao
abcea2c322 Merge branch 'devel' of ssh://master.kernel.org/home/rmk/linux-2.6-arm into devel 2009-03-09 21:21:07 +08:00
Eric Miao
8118aea23c Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-03-09 21:20:23 +08:00
Russell King
c06b4889c3 Merge branch 'omap-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2009-03-09 09:42:15 +00:00
Rusty Russell
6db6a5f3ae lguest: fix for CONFIG_SPARSE_IRQ=y
Impact: remove lots of lguest boot WARN_ON() when CONFIG_SPARSE_IRQ=y

We now need to call irq_to_desc_alloc_cpu() before
set_irq_chip_and_handler_name(), but we can't do that from init_IRQ (no
kmalloc available).

So do it as we use interrupts instead.  Also means we only alloc for
irqs we use, which was the intent of CONFIG_SPARSE_IRQ anyway.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
2009-03-09 10:06:29 +10:30
Rusty Russell
cbd88c8e6f lguest: fix crash 'unhandled trap 13 at <native_read_msr_safe>'
Impact: fix lguest boot crash on modern Intel machines

The code in early_init_intel does:

	if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
		u64 misc_enable;

		rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);

And that rdmsr faults (not allowed from non-0 PL).  We can get around
this by mugging the family ID part of the cpuid.  5 seems like a good
number.

Of course, this is a hack (how very lguest!).  We could just indicate
that we don't support MSRs, or implement lguest_rdmst.

Reported-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Patrick McHardy <kaber@trash.net>
2009-03-09 10:06:28 +10:30
Jeremy Fitzhardinge
0feca851c1 x86-32: make sure virt_addr_valid() returns false for fixmap addresses
I found that virt_addr_valid() was returning true for fixmap addresses.

I'm not sure whether pfn_valid() is supposed to include this test,
but there's no harm in being explicit.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <49B166D6.2080505@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-08 20:03:52 +01:00
Stuart Bennett
d0fc63f7bd x86 mmiotrace: fix remove_kmmio_fault_pages()
Impact: fix race+crash in mmiotrace

The list manipulation in remove_kmmio_fault_pages() was broken. If more
than one consecutive kmmio_fault_page was re-added during the grace
period between unregister_kmmio_probe() and remove_kmmio_fault_pages(),
the list manipulation failed to remove pages from the release list.

After a second grace period the pages get into rcu_free_kmmio_fault_pages()
and raise a BUG_ON() kernel crash.

The list manipulation is fixed to properly remove pages from the release
list.

This bug has been present from the very beginning of mmiotrace in the
mainline kernel. It was introduced in 0fd0e3da ("x86: mmiotrace full
patch, preview 1");

An urgent fix for Linus. Tested by Stuart (on 32-bit) and Pekka
(on amd and intel 64-bit systems, nouveau and nvidia proprietary).

Signed-off-by: Stuart Bennett <stuart@freedesktop.org>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
LKML-Reference: <20090308202135.34933feb@daedalus.pq.iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-08 19:51:23 +01:00
Yinghai Lu
e954ef20c2 x86: fix warning about nodeid
Impact: cleanup

Ingo found there warning about nodeid with some configs.

try to use for_each_online_node for non numa too. in that case
nodeid will be 0.

also move out boundary checking from setup_node_bootmem(), so
non-numa config will not check it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <49B03069.80001@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-08 19:34:17 +01:00
Linus Torvalds
05e12a699e Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pebs: correct qualifier passed to ds_write_config() from ds_request_pebs()
  x86, bts: remove bad warning
  x86: add Dell XPS710 reboot quirk
  x86, math-emu: fix init_fpu for task != current
  x86: EFI: Back efi_ioremap with init_memory_mapping instead of FIX_MAP
  x86: fix DMI on EFI
2009-03-08 10:27:13 -07:00
Linus Torvalds
1401689996 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (28 commits)
  Blackfin arch: SPI_MMC is now mainlined MMC_SPI
  Blackfin arch: disable legacy /proc/scsi/ support by default
  Blackfin arch: remove duplicated ANOMALY_05000448 ifdef check
  Blackfin arch: add stubs for anomalies 447 and 448
  Blackfin arch: cleanup bfin_sport.h header and export it to userspace
  Blackfin arch: fix bug - gdb signull case make trunk kernel panic frequently
  Blackfin arch: remove spurious dash when dcache is off
  Blackfin arch: mark init_pda as __init as only __init funcs all it
  Blackfin arch: fix bug - On bf548-ezkit, ethernet fails to work after wakeup from "mem"
  Blackfin arch: Random read/write errors are a bad thing
  Blackfin arch: update default kernel config, select KSZ8893M driver for BF518
  Blackfin arch: Fix bug - KGDB single step into the middle of a 4 bytes instruction on bf561 after soft bp is hit
  Blackfin arch: Fix bug - make ksz8893m driver available when bfin_mac is enabled
  Blackfin arch: make sure people do not set the kernel load address too high
  Blackfin arch: fix bug - The SPORT_HYS bit is not set for BF561 0.5
  Blackfin arch: update anomaly sheets to match latest public info
  Blackfin arch: Fix BUG - kernel fails to build in pm.c when allow wakeup fromi standby by GPIO
  Blackfin arch: PM_BFIN_WAKE_GP: update help
  Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch
  Blackfin arch: Enable Write Back Cache on all Blackfin Boards
  ...
2009-03-08 10:24:39 -07:00
Linus Torvalds
fd6ec5f3ac Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ata: add CFA specific identify data words
  remove stale comment from <linux/hdreg.h>
  AT91: initialize Compact Flash on AT91SAM9263 cpu
  ide: add at91_ide driver
  ide: allow to wrap interrupt handler
  ide-iops: fix odd-length ATAPI PIO transfers
  ide: NULL noise: drivers/ide/ide-*.c
  ide: expiry() returns int, negative expiry() return values won't be noticed
2009-03-08 10:22:22 -07:00
Linus Torvalds
ba933beb11 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix PCI DMA flag propagation on SN (Altix) with PICs
2009-03-08 10:13:28 -07:00
Ralf Baechle
4302e5d53b MIPS: compat: Implement is_compat_task.
This is a build fix required after "x86-64: seccomp: fix 32/64 syscall
hole" (commit 5b1017404a).  MIPS doesn't
have the issue that was fixed for x86-64 by that patch.

This also doesn't solve the N32 issue which is that N32 seccomp processes
will be treated as non-compat processes thus only have access to N64
syscalls.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-08 09:59:39 -07:00
Wang Chen
8827247ffc x86: don't define __this_fixmap_does_not_exist()
Impact: improve out-of-range fixmap index debugging

Commit "1b42f51630"
defined the __this_fixmap_does_not_exist() function
with a WARN_ON(1) in it.

This causes the linker to not report an error when
__this_fixmap_does_not_exist() is called with a
non-constant parameter.

Ingo defined __this_fixmap_does_not_exist() because he
wanted to get virt addresses of fix memory of nest level
by non-constant index.

But we can fix this and still keep the link-time check:

We can get the four slot virt addresses on link time and
store them to array slot_virt[].

Then we can then refer the slot_virt with non-constant index,
in the ioremap-leak detection code.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
LKML-Reference: <49B2075B.4070509@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-08 17:07:47 +01:00
Jaswinder Singh Rajput
e255357764 x86: perf_counter cleanup
Remove unused variables and duplicate header file.

Signed-off-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-08 16:26:50 +01:00
Peter Zijlstra
184fe4ab1f x86: perf_counter cleanup
Use and actual unsigned long bitmap instead of casting our way around.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
LKML-Reference: <1236508459.22914.3645.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-08 16:24:49 +01:00
Yinghai Lu
1f442d70c8 x86: remove smp_apply_quirks()/smp_checks()
Impact: cleanup and code size reduction on 64-bit

This code is only applied to Intel Pentium and AMD K7 32-bit cpus.

Move those checks to intel_init()/amd_init() for 32-bit
so 64-bit will not build this code.

Also change to use cpu_index check to see if we need to emit warning.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <49B377D2.8030108@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-08 16:22:56 +01:00
Ben Dooks
aa8aba6944 [ARM] S3C: Do not kmalloc/kfree during inner suspend code.
The PM CRC checking code kmallocs an area to save a set of
CRC values during suspend. This triggers a warning due to the
call of a function that might sleep whilst the system is not
in a valid state to do so.

Move the allocation and free to points in the suspend and resume
process where they can call a function that might-sleep.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 13:19:54 +00:00
Ben Dooks
663a83048c [ARM] S3C: Avoid checking the task stackpage in pm-check
When doing the CRC check of the memory, avoid checking
the page that our stack is residing in as this changes
during the execution of the suspend and resume.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:38:06 +00:00
Ben Dooks
67c2addcb0 [ARM] S3C24XX: Add S3C_GPIO_END definition
Add the definition for S3C_GPIO_END to allow the PM code to build.

This means moving the GPIO bank numbers to a separate file to allow
the gpio and regs-gpio to include them. Including regs-gpio.h into
gpio.h causes too many build problems and adding gpio.h would mean
editing a large number of files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:37:57 +00:00
Ben Dooks
d2b07fe2a3 [ARM] S3C: Update UART save over PM suspend/resume
Change the way the UART state is saved over suspend to allow the s3c64xx
code to modify the settings on resume to avoid any illegal state changes
to the UART clocks. This will also allow us to save the UDIVSLOT register
on newer SoCs.

Move to using a structure for the UART use the extant Kconfig configuration
specifying the number of UARTs.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:37:10 +00:00
Ben Dooks
ef30e14420 [ARM] S3C: Rename sleep.S functions to be non-cpu specific
Rename s3c2410_cpu_resume to s3c_cpu_resume and s3c2410_cpu_save to
s3c_cpu_save to remove the CPU specific naming of these functions
which are now in the generic PM code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:37:05 +00:00
Ben Dooks
4e59c25dcb [ARM] S3C: Rename s3c2410_pm_init to s3c_pm_init.
Since we have moved a large proportion of the PM code to the common
support area, remove the cpu specific name from the initialisation
function.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:35:47 +00:00
Andy Green
598ee00207 [ARM] S3C24XX: Fix bug in IRQ_EINT_BIT() calculation
There's a bug in calculation of IRQ_EINT_BIT introduced on the test
branch for pm changes for s3c by Ben Dooks fixed in this patch.

There's also a bit of a mystery about how wake gets to wake EINT
set of interrupts, I added a couple of lines that make it work for
EINT4+ but not sure what's meant to be there for EINT0-3.

Still, this gets GTA02 resume working again.

Signed-off-by: Andy Green <andy@openmoko.com>
[ben-linux@fluff.org: remove irq-pm.c change]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:35:42 +00:00
Ben Dooks
56b3442688 [ARM] S3C: Make IRQ_EINT sleep control common
Move the IRQ_EINT sleep control to be available to all
s3c impelmentations. Since s3c_irqext_wake is not large,
place it in arch/arm/plat-s3c/pm.c as adding it to a new
file would be a waste of compile time.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:35:36 +00:00
Ben Dooks
7299a40918 [ARM] S3C24XX: Remove changelog from arch/arm/plat-s3c24xx/irq.c
Remove the changelog, this file is in version control.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:35:30 +00:00
Ben Dooks
65fa22b73f [ARM] S3C24XX: Split PM code from arch/arm/plat-s3c24xx/irq.c
Split the PM code out of arch/arm/plat-s3c24xx/irq.c to
remove some of the #ifdefs being used. Also fix a couple
of places where the absecnce of a function was redefined
to the same thing.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:35:25 +00:00
Ben Dooks
840eeeb880 [ARM] S3C: Fix warnings in the PM memory CRC code
Fix warnings from struct resource being bigger than unsigned long by
forcing the type. We are only a 32bit platform so no physical memory
addresses will be too big to fit in this.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:33:58 +00:00
Ben Dooks
2261e0e6e3 [ARM] S3C: Move plat-s3c24xx pm.c support into plat-s3c
Move parts of the core and debug suspend code into the
plat-s3c for use with the new s3c64xx code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:33:51 +00:00
Ben Dooks
549c7e33ae [ARM] S3C: Split the resume memory check code from pm.c
Split the optional memory check code out of the pm.c file
as it is quite a big #ifdef block and as-such can be moved
out and simply compiled when the configuration is set.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:33:39 +00:00
Ben Dooks
6419711a16 [ARM] S3C: Move PM support functions to common location
Start moving the PM code by moving all the common support functions
to a common location in arch/arm/plat-s3c. With the move we rename
the functions from s3cxxx_ to s3c_ to fit the new location.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:23:51 +00:00
Ben Dooks
a3f66351b3 [ARM] S3C: Nove <plat/pm.h> from plat-s3c24xx to plat-s3fc
Move the <plat/pm.h> header to plat-s3c as preparation
for moving parts of the s3c24xx pm support which are
common into the plat-s3c support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:23:41 +00:00
Cliff Wickman
3a450de136 x86: UV: remove uv_flush_tlb_others() WARN_ON
In uv_flush_tlb_others() (arch/x86/kernel/tlb_uv.c),
the "WARN_ON(!in_atomic())" fails if CONFIG_PREEMPT is not enabled.

And CONFIG_PREEMPT is not enabled by default in the distribution that
most UV owners will use.

We could #ifdef CONFIG_PREEMPT the warning, but that is not good form.
And there seems to be no suitable fix to in_atomic() when CONFIG_PREMPT
is not on.

As Ingo commented:

  > and we have no proper primitive to test for atomicity. (mainly
  > because we dont know about atomicity on a non-preempt kernel)

So we drop the WARN_ON.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-08 11:17:15 +01:00
Russell King
74fac66e82 Merge branch 's3c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux 2009-03-06 21:53:05 +00:00
Jeremy Higdon
c63c58056e [IA64] fix PCI DMA flag propagation on SN (Altix) with PICs
We recently discovered a problem with passing of DMA attributes on SN
systems with the older PIC chips.

[akpm@linux-foundation.org: coding-style fixes]

Signed-off-by: Jeremy Higdon <jeremy@sgi.com>
Cc: <habeck@sgi.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-03-06 10:41:13 -08:00
Ben Dooks
1264fa6f8c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into s3c-fixes 2009-03-06 17:13:52 +00:00
Darius Augulis
20214fcd74 MX1 fix include
Includes missed irqs.h in devices.c and mx1ads.c.

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-06 17:28:10 +01:00
Cyrill Gorcunov
7ab152470e x86: linkage.h - guard assembler specifics by __ASSEMBLY__
Stephen Rothwell reported:

|Today's linux-next build (x86_64 allmodconfig) produced this warning:
|
|In file included from drivers/char/epca.c:49:
|drivers/char/digiFep1.h:7:1: warning: "GLOBAL" redefined
|In file included from include/linux/linkage.h:5,
|                 from include/linux/kernel.h:11,
|                 from arch/x86/include/asm/system.h:10,
|                 from arch/x86/include/asm/processor.h:17,
|                 from include/linux/prefetch.h:14,
|                 from include/linux/list.h:6,
|                 from include/linux/module.h:9,
|                 from drivers/char/epca.c:29:
|arch/x86/include/asm/linkage.h:55:1: warning: this is the location of the previous definition
|
|Probably introduced by commit 95695547a7
|("x86: asm linkage - introduce GLOBAL macro") from the x86 tree.

Any assembler specific snippets being placed in headers
are to be protected by __ASSEMBLY__. Fixed.

Also move __ALIGN definition under the same protection as well.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090306160833.GB7420@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 17:14:12 +01:00
Grant Likely
48b3fd14bd powerpc/4xx: update ml507 .dts file to release reference design
This patch updates the Xilinx ML507 device tree to match the released
ML507 powerpc reference design (ml507_ppc440_emb_ref).  This patch is
needed to boot Linux on the ML507 powerpc reference design without
manually generating and tweaking a device tree from the project directory.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-03-06 08:50:24 -07:00