Commit graph

40,207 commits

Author SHA1 Message Date
Robin Holt
39d481cba2 [IA64] bte_copy of BTE_MAX_XFER trips BUG_ON.
BTE_MAX_XFER is wrong.  It is one greater than the number of cache
lines the BTE is actually able to transfer.  If you request a transfer
of exactly BTE_MAX_XFER size, you trip a very cryptic BUG_ON() which
should certainly be made more clear.

This patch fixes that constant and also cleans up the BUG_ON()s in
arch/ia64/sn/kernel/bte.c to test one condition per line.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Tony Luck <aegl@agluck-desktop.(none)>
2009-02-19 11:29:31 -08:00
Tony Luck
334f85b647 [IA64] Build fix for __early_pfn_to_nid() undefined link error
ia64 only defines __early_pfn_to_nid() for SPARSEMEM && NUMA configurations,
so the recent:

	commit: f2dbcfa738
	mm: clean up for early_pfn_to_nid()

ends up with some link problems for certain configuration files.

Fix arch/ia64/Kconfig to only define HAVE_ARCH_EARLY_PFN_TO_NID in the
cases where we do provide this function.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-19 11:22:36 -08:00
Linus Torvalds
402a917aca Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5405/1: ep93xx: remove unused gesbc9312.h header
  [ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC
  [ARM] omap: fix clock reparenting in omap2_clk_set_parent()
  [ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0
  [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()
  [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support
  [ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller
  [ARM] 5391/1: AT91: Enable GPIO clocks earlier
  [ARM] 5390/1: AT91: Watchdog fixes
  [ARM] 5398/1: Add Wan ZongShun to MAINTAINERS for W90P910
  [ARM] omap: fix _omap2_clksel_get_src_field()
  [ARM] omap: fix omap2_divisor_to_clksel() error return value
2009-02-19 09:52:12 -08:00
Russell King
c0bf31320d [ARM] omap: add support for bypassing DPLLs
This roughly corresponds with OMAP commits: 7d06c48, 3241b19,
88b5d9b, 18a5500, 9c909ac, 5c6497b, 8b1f0bd, 2ac1da8.

For both OMAP2 and OMAP3, we note the reference and bypass clocks in
the DPLL data structure.  Whenever we modify the DPLL rate, we first
ensure that both the reference and bypass clocks are enabled.  Then,
we decide whether to use the reference and DPLL, or the bypass clock
if the desired rate is identical to the bypass rate, and program the
DPLL appropriately.  Finally, we update the clock's parent, and then
disable the unused clocks.

This keeps the parents correctly balanced, and more importantly ensures
that the bypass clock is running whenever we reprogram the DPLL.  This
is especially important because the procedure for reprogramming the DPLL
involves switching to the bypass clock.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 17:28:30 +00:00
Ingo Molnar
e9ce0c37c2 Merge branch 'x86/untangle2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen into x86/headers 2009-02-19 18:15:01 +01:00
Linus Torvalds
bcf8951fc2 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: fix ifdef for 64bit thermal apic vector clear on shutdown
  x86, mce: use force_sig_info to kill process in machine check
  x86, mce: reinitialize per cpu features on resume
  x86, rcu: fix strange load average and ksoftirqd behavior
2009-02-19 09:14:35 -08:00
Hartley Sweeten
9dd446f657 [ARM] 5405/1: ep93xx: remove unused gesbc9312.h header
Remove the gesbc9312.h header since it is unused.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 16:13:02 +00:00
Cyrill Gorcunov
cb425afd21 x86: compressed head_32 - use ENTRY,ENDPROC macros
Impact: clenaup

Linker script will put startup_32 at predefined
address so using startup_32 will not bloat the
code size.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19 17:13:01 +01:00
Cyrill Gorcunov
2d4eeecb98 x86: compressed head_64 - use ENTRY,ENDPROC macros
Impact: clenaup

Linker script will put startup_32 at predefined
address so using ENTRY will not bloat the code
size.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19 17:13:01 +01:00
Cyrill Gorcunov
324bda9e47 x86: pmjump - use GLOBAL,ENDPROC macros
Impact: cleanup

We are in setup stage so we use GLOBAL
instead of ENTRY and do not increase code
size.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19 17:13:00 +01:00
Cyrill Gorcunov
2f79555097 x86: copy.S - use GLOBAL,ENDPROC macros
Impact: cleanup

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19 17:13:00 +01:00
Cyrill Gorcunov
1b25f3b4e1 x86: linkage - get rid of _X86 macros
Impact: cleanup

There was an attempt to bring build-time checking for
missed ENTRY_X86/END_X86 and KPROBE... pairs. Using
them will add messy in code. Get just rid of them.
This commit could be easily restored if the need appear
in future.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19 17:12:59 +01:00
Cyrill Gorcunov
95695547a7 x86: asm linkage - introduce GLOBAL macro
If the code is time critical and this entry is called
from other places we use ENTRY to have it globally defined
and especially aligned.

Contrary we have some snippets which are size
critical. So we use plane ".globl name; name:"
directive. Introduce GLOBAL macro for this.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19 17:12:59 +01:00
Makito SHIOKAWA
9da616fb99 [ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC
READ_IMPLIES_EXEC must be set when:
o binary _is_ an executable stack (i.e. not EXSTACK_DISABLE_X)
o processor architecture is _under_ ARMv6 (XN bit is supported from ARMv6)

Signed-off-by: Makito SHIOKAWA <lkhmkt@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 14:45:27 +00:00
Heiko Carstens
23d75d9cad [S390] fix "mem=" handling in case of standby memory
Standby memory detected with the sclp interface gets always registered
with add_memory calls without considering the limitationt that the
"mem=" kernel paramater implies.
So fix this and only register standby memory that is below the specified
limit.
This fixes zfcpdump since it uses "mem=32M". In case there is appr.
2GB standby memory present all of usable memory would be used for the
struct pages needed for standby memory.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-02-19 15:19:19 +01:00
Christian Borntraeger
d5cd0343d2 [S390] Fix timeval regression on s390
commit aa5e97ce4b
[PATCH] improve precision of process accounting.

Introduced a timing regression:
-bash-3.2# time ls
real    0m0.006s
user    0m1.754s
sys     0m1.094s

The problem was introduced by an error in cputime_to_timeval.
Cputime is now 1/4096 microsecond, therefore, we have to divide
the remainder with 4096 to get the microseconds.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-02-19 15:19:19 +01:00
Russell King
41f3103fcf [ARM] omap: fix clock reparenting in omap2_clk_set_parent()
When changing the parent of a clock, it is necessary to keep the
clock use counts balanced otherwise things the parent state will
get corrupted.  Since we already disable and re-enable the clock,
we might as well use the recursive versions instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 13:25:16 +00:00
Catalin Marinas
7db21712ae [ARM] 5397/1: RealView: Add support for the ISP1761 USB chip
This patch adds the platform_device and resource structures for the USB
ISP1761 chip, usable with the in-kernel isp1760 driver.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 11:30:27 +00:00
Catalin Marinas
6be62ba215 [ARM] 5396/1: RealView: Use PATA_PLATFORM to access the CompactFlash
This driver adds the platform_device definitions to allow the use of
CompactFlash on the RealView PB11MPCore and PB-A8 platforms. Note that
the CompactFlash controller is expected to be initialised by the Boot
Monitor and support the True IDE mode.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 11:30:26 +00:00
Catalin Marinas
533ad5e60c [ARM] 5395/1: RealView: Add support for the DS1338 RTC chip
This chip is on the I2C bus on the RealView and Versatile boards. The
patch adds the i2c_board_info definition for this device and registers
it with the I2C subsystem.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 11:30:25 +00:00
Alexander Schulz
eab184c236 [ARM] 5363/1: Shark cleanup and new defconfig
This includes a new defconfig for the Shark and some changes to
the mach-shark directory to avoid namespace pollution and to
switch the rtc to the newer driver.

Signed-off-by: Alexander Schulz <alex@shark-linux.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 11:30:20 +00:00
Daniel Silverstone
1144d6535f [ARM] 5376/1: S3C24XX: Fix sparse errors in platform uncompress.h
Ensure __iomem attribute is __force 'd off in the minimal
__raw_writel() implementation.

Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 11:30:19 +00:00
Catalin Marinas
adf8b37baf [ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding
This patch also makes the frame pointer default to y only if
!ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is
enabled.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 11:30:18 +00:00
Catalin Marinas
c4c5716e16 [ARM] 5385/2: unwind: Add unwinding information to exception entry points
This is needed to allow or stop the unwinding at certain points in the
kernel like exception entries.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 11:27:35 +00:00
Catalin Marinas
2e1926e7b5 [ARM] 5384/1: unwind: Add stack unwinding support for loadable modules
This patch adds ELF section parsing for the unwinding tables in loadable
modules together with the PREL31 relocation symbol resolving.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 11:27:19 +00:00
Catalin Marinas
bff595c15c [ARM] 5383/2: unwind: Add core support for ARM stack unwinding
This patch adds the main functionality for parsing the stack unwinding
information generated by the ARM EABI toolchains. The unwinding
information consists of an index with a pair of words per function and a
table with unwinding instructions. For more information, see "Exception
Handling ABI for the ARM Architecture" at:

http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 11:26:24 +00:00
Hiroshi Shimamoto
71d8f9784a x86: syscalls.h: remove asmlinkage from declaration of sys_rt_sigreturn()
Impact: cleanup

asmlinkage for sys_rt_sigreturn() no longer exists in arch/x86/kernel/signal.c.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19 12:18:54 +01:00
Ingo Molnar
4cd0332db7 Merge branch 'mainline/function-graph' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/function-graph-tracer 2009-02-19 12:13:33 +01:00
Nicolas Pitre
3fd9825c42 [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()
In the non highmem case, if two memory banks of 1GB each are provided,
the second bank would evade suppression since its virtual base would
be 0.  Fix this by disallowing any memory bank which virtual base
address is found to be lower than PAGE_OFFSET.

Reported-by: Lennert Buytenhek <buytenh@marvell.com>

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 09:49:45 +00:00
Jaswinder Singh Rajput
de5483029b x86: include/asm/processor.h remove double declaration of print_cpu_info
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19 10:12:18 +01:00
Ingo Molnar
72c26c9a26 Merge branch 'linus' into tracing/blktrace
Conflicts:
	block/blktrace.c

Semantic merge:
	kernel/trace/blktrace.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-19 09:00:35 +01:00
KAMEZAWA Hiroyuki
cc2559bccc mm: fix memmap init for handling memory hole
Now, early_pfn_in_nid(PFN, NID) may returns false if PFN is a hole.
and memmap initialization was not done. This was a trouble for
sparc boot.

To fix this, the PFN should be initialized and marked as PG_reserved.
This patch changes early_pfn_in_nid() return true if PFN is a hole.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reported-by: David Miller <davem@davemlloft.net>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 15:37:55 -08:00
KAMEZAWA Hiroyuki
f2dbcfa738 mm: clean up for early_pfn_to_nid()
What's happening is that the assertion in mm/page_alloc.c:move_freepages()
is triggering:

	BUG_ON(page_zone(start_page) != page_zone(end_page));

Once I knew this is what was happening, I added some annotations:

	if (unlikely(page_zone(start_page) != page_zone(end_page))) {
		printk(KERN_ERR "move_freepages: Bogus zones: "
		       "start_page[%p] end_page[%p] zone[%p]\n",
		       start_page, end_page, zone);
		printk(KERN_ERR "move_freepages: "
		       "start_zone[%p] end_zone[%p]\n",
		       page_zone(start_page), page_zone(end_page));
		printk(KERN_ERR "move_freepages: "
		       "start_pfn[0x%lx] end_pfn[0x%lx]\n",
		       page_to_pfn(start_page), page_to_pfn(end_page));
		printk(KERN_ERR "move_freepages: "
		       "start_nid[%d] end_nid[%d]\n",
		       page_to_nid(start_page), page_to_nid(end_page));
 ...

And here's what I got:

	move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00]
	move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00]
	move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff]
	move_freepages: start_nid[1] end_nid[0]

My memory layout on this box is:

[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x0081ff5d
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[8] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00020000
[    0.000000]     1: 0x00800000 -> 0x0081f7ff
[    0.000000]     1: 0x0081f800 -> 0x0081fe50
[    0.000000]     1: 0x0081fed1 -> 0x0081fed8
[    0.000000]     1: 0x0081feda -> 0x0081fedb
[    0.000000]     1: 0x0081fedd -> 0x0081fee5
[    0.000000]     1: 0x0081fee7 -> 0x0081ff51
[    0.000000]     1: 0x0081ff59 -> 0x0081ff5d

So it's a block move in that 0x81f600-->0x81f7ff region which triggers
the problem.

This patch:

Declaration of early_pfn_to_nid() is scattered over per-arch include
files, and it seems it's complicated to know when the declaration is used.
 I think it makes fix-for-memmap-init not easy.

This patch moves all declaration to include/linux/mm.h

After this,
  if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
     -> Use static definition in include/linux/mm.h
  else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
     -> Use generic definition in mm/page_alloc.c
  else
     -> per-arch back end function will be called.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: David Miller <davem@davemlloft.net>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 15:37:55 -08:00
Steven Rostedt
712406a6bf tracing/function-graph-tracer: make arch generic push pop functions
There is nothing really arch specific of the push and pop functions
used by the function graph tracer. This patch moves them to generic
code.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-18 13:43:04 -05:00
Ingo Molnar
74019224ac timers: add mod_timer_pending()
Impact: new timer API

Based on an idea from Martin Josefsson with the help of
Patrick McHardy and Stephen Hemminger:

introduce the mod_timer_pending() API which is a mod_timer()
offspring that is an invariant on already removed timers.

(regular mod_timer() re-activates non-pending timers.)

This is useful for the networking code in that it can
allow unserialized mod_timer_pending() timer-forwarding
calls, but a single del_timer*() will stop the timer
from being reactivated again.

Also while at it:

- optimize the regular mod_timer() path some more, the
  timer-stat and a debug check was needlessly duplicated
  in __mod_timer().

- make the exports come straight after the function, as
  most other exports in timer.c already did.

- eliminate __mod_timer() as an external API, change the
  users to mod_timer().

The regular mod_timer() code path is not impacted
significantly, due to inlining optimizations and due to
the simplifications.

Based-on-patch-from: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-18 19:26:33 +01:00
James Hsiao
049359d655 crypto: amcc - Add crypt4xx driver
This patch adds support for AMCC ppc4xx security device driver. This is the
initial release that includes the driver framework with AES and SHA1 algorithms
support.

The remaining algorithms will be released in the near future.

Signed-off-by: James Hsiao <jhsiao@amcc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-18 16:49:43 +08:00
Herbert Xu
563f346d04 crypto: sha-s390 - Switch to shash
This patch converts the S390 sha algorithms to the new shash interface.

With fixes by Jan Glauber.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-18 16:48:07 +08:00
Huang Ying
54b6a1bd53 crypto: aes-ni - Add support to Intel AES-NI instructions for x86_64 platform
Intel AES-NI is a new set of Single Instruction Multiple Data (SIMD)
instructions that are going to be introduced in the next generation of
Intel processor, as of 2009. These instructions enable fast and secure
data encryption and decryption, using the Advanced Encryption Standard
(AES), defined by FIPS Publication number 197.  The architecture
introduces six instructions that offer full hardware support for
AES. Four of them support high performance data encryption and
decryption, and the other two instructions support the AES key
expansion procedure.

The white paper can be downloaded from:

http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf

AES may be used in soft_irq context, but MMX/SSE context can not be
touched safely in soft_irq context. So in_interrupt() is checked, if
in IRQ or soft_irq context, the general x86_64 implementation are used
instead.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-18 16:48:06 +08:00
Huang Ying
07bf44f869 crypto: aes - Export x86 AES encrypt/decrypt functions
Intel AES-NI AES acceleration instructions touch XMM state, to use
that in soft_irq context, general x86 AES implementation is used as
fallback. The first parameter is changed from struct crypto_tfm * to
struct crypto_aes_ctx * to make it easier to deal with 16 bytes
alignment requirement of AES-NI implementation.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-18 16:48:05 +08:00
Huang Ying
109568e110 crypto: aes - Move key_length in struct crypto_aes_ctx to be the last field
The Intel AES-NI AES acceleration instructions need key_enc, key_dec
in struct crypto_aes_ctx to be 16 byte aligned, it make this easier to
move key_length to be the last one.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-18 16:48:04 +08:00
Benjamin Herrenschmidt
3b7faeb49e Merge commit 'kumar/next' into next 2009-02-18 13:23:30 +11:00
Benjamin Herrenschmidt
82a0a1cc8f Merge commit 'origin/master' into next
Manual merge of:
	arch/powerpc/include/asm/pgtable-ppc32.h
2009-02-18 13:19:25 +11:00
Huang Ying
ef41df4344 x86, mce: fix a race condition in mce_read()
Impact: bugfix

Considering the situation as follow:

before: mcelog.next == 1, mcelog.entry[0].finished = 1

+--------------------------------------------------------------------------
R                   W1                  W2                  W3

read mcelog.next (1)
                    mcelog.next++ (2)
                    (working on entry 1,
                    finished == 0)

mcelog.next = 0
                                        mcelog.next++ (1)
                                        (working on entry 0)
                                                           mcelog.next++ (2)
                                                           (working on entry 1)
                        <----------------- race ---------------->
                    (done on entry 1,
                    finished = 1)
                                                           (done on entry 1,
                                                           finished = 1)

To fix the race condition, a cmpxchg loop is added to mce_read() to
ensure no new MCE record can be added between mcelog.next reading and
mcelog.next = 0.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17 15:33:05 -08:00
Andi Kleen
d6b75584a3 x86, mce: disable machine checks on offlined CPUs
Impact: Lower priority bug fix

Offlined CPUs could still get machine checks, but the machine check handler
cannot handle them properly, leading to an unconditional crash. Disable
machine checks on CPUs that are going down.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17 15:32:56 -08:00
Andi Kleen
5b4408fdaa x86, mce: don't set up mce sysdev devices with mce=off
Impact: bug fix, in this case the resume handler shouldn't run which
	avoids incorrectly reenabling machine checks on resume

When MCEs are completely disabled on the command line don't set
up the sysdev devices for them either.

Includes a comment fix from Thomas Gleixner.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17 15:32:50 -08:00
Andi Kleen
52d168e28b x86, mce: switch machine check polling to per CPU timer
Impact: Higher priority bug fix

The machine check poller runs a single timer and then broadcasted an
IPI to all CPUs to check them. This leads to unnecessary
synchronization between CPUs. The original CPU running the timer has
to wait potentially a long time for all other CPUs answering. This is
also real time unfriendly and in general inefficient.

This was especially a problem on systems with a lot of events where
the poller run with a higher frequency after processing some events.
There could be more and more CPU time wasted with this, to
the point of significantly slowing down machines.

The machine check polling is actually fully independent per CPU, so
there's no reason to not just do this all with per CPU timers.  This
patch implements that.

Also switch the poller also to use standard timers instead of work
queues. It was using work queues to be able to execute a user program
on a event, but mce_notify_user() handles this case now with a
separate callback. So instead always run the poll code in in a
standard per CPU timer, which means that in the common case of not
having to execute a trigger there will be less overhead.

This allows to clean up the initialization significantly, because
standard timers are already up when machine checks get init'ed.  No
multiple initialization functions.

Thanks to Thomas Gleixner for some help.

Cc: thockin@google.com
v2: Use del_timer_sync() on cpu shutdown and don't try to handle
migrated timers.
v3: Add WARN_ON for timer running on unexpected CPU

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17 15:32:44 -08:00
Andi Kleen
9bd9840580 x86, mce: always use separate work queue to run trigger
Impact: Needed for bug fix in next patch

This relaxes the requirement that mce_notify_user has to run in process
context. Useful for future changes, but also leads to cleaner
behaviour now. Now instead mce_notify_user can be called directly
from interrupt (but not NMI) context.

The work queue only uses a single global work struct, which can be done safely
because it is always free to reuse before the trigger function is executed.
This way no events can be lost.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17 15:32:41 -08:00
Andi Kleen
123aa76ec0 x86, mce: don't disable machine checks during code patching
Impact: low priority bug fix

This removes part of a a patch I added myself some time ago. After some
consideration the patch was a bad idea. In particular it stopped machine check
exceptions during code patching.

To quote the comment:

        * MCEs only happen when something got corrupted and in this
        * case we must do something about the corruption.
        * Ignoring it is worse than a unlikely patching race.
        * Also machine checks tend to be broadcast and if one CPU
        * goes into machine check the others follow quickly, so we don't
        * expect a machine check to cause undue problems during to code
        * patching.

So undo the machine check related parts of
8f4e956b31 NMIs are still disabled.

This only removes code, the only additions are a new comment.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17 15:32:38 -08:00
Andi Kleen
973a2dd1d5 x86, mce: disable machine checks on suspend
Impact: Bug fix

During suspend it is not reliable to process machine check
exceptions, because CPUs disappear but can still get machine check
broadcasts.  Also the system is slightly more likely to
machine check them, but the handler is typically not a position
to handle them in a meaningfull way.

So disable them during suspend and enable them during resume.

Also make sure they are always disabled on hot-unplugged CPUs.

This new code assumes that suspend always hotunplugs all
non BP CPUs.

v2: Remove the WARN_ONs Thomas objected to.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17 15:32:14 -08:00
Andi Kleen
07db1c140e x86, mce: fix ifdef for 64bit thermal apic vector clear on shutdown
Impact: Bugfix

The ifdef for the apic clear on shutdown for the 64bit intel thermal
vector was incorrect and never triggered. Fix that.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17 15:24:34 -08:00