Commit graph

40,207 commits

Author SHA1 Message Date
Michael Wolf
23e55f92d4 powerpc: Adjust base and index registers in Altivec macros
On POWER6 systems RA needs to be the base and RB the index.
If they are reversed you take a misdirect hit.

Signed-off-by: Mike Wolf <mjwolf@us.ibm.com>

----
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:12 +10:00
Becky Bruce
e3e1d15855 powerpc: Name xpn & x fields in HW Hash PTE format
Previously, the 36-bit code was using these bits, but they had
never been named in the pte format definition.  This patch just
gives those fields their proper names and adds a comment that
they are only present on some processors.

There is no functional code change.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:12 +10:00
FUJITA Tomonori
80d3e8abb7 powerpc: Add CONFIG_DMA_API_DEBUG support
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:11 +10:00
FUJITA Tomonori
4a9a6bfe70 powerpc: Handle SWIOTLB mapping error properly
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:11 +10:00
FUJITA Tomonori
46bab4e4b4 powerpc: Use asm-generic/dma-mapping-common.h
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:10 +10:00
FUJITA Tomonori
45223c5492 powerpc: use dma_map_ops struct
This converts uses dma_map_ops struct (in include/linux/dma-mapping.h)
instead of POWERPC homegrown dma_mapping_ops.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:10 +10:00
FUJITA Tomonori
3702977fa7 powerpc: Remove swiotlb_pci_dma_ops
Now swiotlb_pci_dma_ops is identical to swiotlb_dma_ops; we can use
swiotlb_dma_ops with any devices. This removes swiotlb_pci_dma_ops.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:09 +10:00
FUJITA Tomonori
762afb7317 powerpc: Remove addr_needs_map in struct dma_mapping_ops
This patch adds max_direct_dma_addr to struct dev_archdata to remove
addr_needs_map in struct dma_mapping_ops. It also converts
dma_capable() to use max_direct_dma_addr.

max_direct_dma_addr is initialized in pci_dma_dev_setup_swiotlb(),
called via ppc_md.pci_dma_dev_setup hook.

For further information:
http://marc.info/?t=124719060200001&r=1&w=2

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:09 +10:00
Benjamin Herrenschmidt
2864697cef Merge commit 'tip/iommu-for-powerpc' into next 2009-08-28 14:23:06 +10:00
Yoshihiro Shimoda
e79d57479c sh: sh7785lcr: fix prototype board on 32bit MMU mode.
Fix up PCA9564 resources on 32bit MMU mode using prototype board.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Tested-by: Raul Porcel <armin76@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-28 10:19:13 +09:00
Paul Mundt
f840dd5e74 sh: Tidy up watchdog build for SH-2.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-28 10:19:12 +09:00
Thomas Gleixner
90e1c6969d x86: Move oem_bus_info to x86_init_ops
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:53 +02:00
Thomas Gleixner
52fdb56846 x86: Move mpc_oem_pci_bus to x86_init_ops
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
72302142e1 x86: Move smp_read_mpc_oem to x86_init_ops.
Move smp_read_mpc_oem from quirks to x86_init.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
fd6c666149 x86: Move mpc_apic_id to x86_init_ops
The mpc_apic_id setup is handled by a x86_quirk. Make it a
x86_init_ops function with a default implementation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
de93410310 x86: Move ioapic_ids_setup to x86_init_ops
32bit and also the numaq code have special requirements on the
ioapic_id setup. Convert it to a x86_init_ops function and get rid
of the quirks and #ifdefs

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
f4848472cd x86: Sanitize smp_record and move it to x86_init_ops
The x86 quirkification introduced an extra ugly hackery with a
variable pointer in the mpparse code. If the pointer is initialized
then it is dereferenced and the variable set to 0 or incremented.

Create a x86_init_ops function and let the affected numaq code
hold the function. Default init is a setup noop.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
6b18ae3e2f x86: Move memory_setup to x86_init_ops
memory_setup is overridden by x86_quirks and by paravirts with weak
functions and quirks. Unify the whole mess and make it an
unconditional x86_init_ops function which defaults to the standard
function and can be overridden by the early platform code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
816c25e7d4 x86: Add reserve_ebda_region to x86_init_ops
reserve_ebda_region needs to be called befor start_kernel. Moorestown
needs to override it. Make it a x86_init_ops function and initialize
it with the default reserve_ebda_region.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
8fee697d99 x86: Add request_standard_resources to x86_init
The 32bit and the 64bit code are slighty different in the reservation
of standard resources. Also the upcoming Moorestown support needs its
own version of that.

Add it to x86_init_ops and initialize it with the 64bit default. 32bit
overrides it in early boot. Now moorestown can add it's own override
w/o sprinkling the code with more #ifdefs

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
f7cf5a5b8c x86: Add probe_roms to x86_init
probe_roms is only used on 32bit. Add it to the x86_init ops and
remove the #ifdefs.

Default initializer is x86_init_noop() which is overridden in
the 32bit boot code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
57844a8f8e x86: Add x86_init infrastructure
The upcoming Moorestown support brings the embedded world to x86. The
setup code of x86 has already a couple of hooks which are either
x86_quirks or paravirt ops. Some of those setup hooks are pretty
convoluted like the timer setup and the tsc calibration code. But
there are other places which could do with a cleanup.

Instead of having inline functions/macros which are modified at
compile time I decided to introduce x86_init ops which are
unconditional in the code and make it clear that they can be changed
either during compile time or in the early boot process. The function
pointers are initialized by default functions which can be noops so
that the pointer can be called unconditionally in the most cases. This
also allows us to remove 32bit/64bit, paravirt and other #ifdeffery.

paravirt guests are just a hardware platform in the setup code, so we
should treat them as such and not hide all behind multiple layers of
indirection and compile time dependencies.

It's more obvious that x86_init.timers.timer_init() is a function
pointer than the late_time_init = choose_time_init() obscurity. It's
also way simpler to grep for x86_init.timers.timer_init and find all
the places which modify that function pointer instead of analyzing
weak functions, macros and paravirt indirections.

Note. This is not a general paravirt_ops replacement. It just will
move setup related hooks which are potentially useful for other
platform setup purposes as well out of the paravirt domain.

Add the base infrastructure without any functionality.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:12:52 +02:00
Thomas Gleixner
4152f93508 Merge branch 'sched/clock' into x86/cleanups
Reason: The tsc init cleanup depends on sched_clock_init moving past
late_time_init.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 17:06:24 +02:00
Thomas Gleixner
6effcd9245 Merge branch 'x86/paravirt' into x86/cleanups
Reason: The setup cleanups conflict with the paravirt cleanups. Avoid
a rather large merge conflict

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27 16:42:32 +02:00
Bob Moore
15b8dd53f5 ACPICA: Major update for acpi_get_object_info external interface
Completed a major update for the acpi_get_object_info external interface.
Changes include:
 - Support for variable, unlimited length HID, UID, and CID strings
 - Support Processor objects the same as Devices (HID,UID,CID,ADR,STA, etc.)
 - Call the _SxW power methods on behalf of a device object
 - Determine if a device is a PCI root bridge
 - Change the ACPI_BUFFER parameter to ACPI_DEVICE_INFO.
These changes will require an update to all callers of this interface.
See the ACPICA Programmer Reference for details.

Also, update all invocations of acpi_get_object_info interface

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:15 -04:00
Linus Torvalds
e99b1f22f9 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/ps3: Update ps3_defconfig
  powerpc/ps3: Add missing check for PS3 to rtc-ps3 platform device registration
2009-08-26 20:39:31 -07:00
Geoff Levand
b080f187ad powerpc/ps3: Update ps3_defconfig
Update ps3_defconfig.

 o Refresh for 2.6.31.
 o Remove MTD support.
 o Add more HID drivers.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-27 13:27:59 +10:00
Geert Uytterhoeven
7b6a09f3d6 powerpc/ps3: Add missing check for PS3 to rtc-ps3 platform device registration
On non-PS3, we get:

| kernel BUG at drivers/rtc/rtc-ps3.c:36!

because the rtc-ps3 platform device is registered unconditionally in a kernel
with builtin support for PS3.

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-27 13:25:46 +10:00
Benjamin Herrenschmidt
3c2ee2d9f4 Merge commit 'kumar/next' into next 2009-08-27 13:13:41 +10:00
Gautham R Shenoy
6776426320 powerpc/pseries: Reduce the polling interval in __cpu_up()
Time time taken for a single cpu online operation on a pseries machine
is as follows:
Dedicated LPAR (POWER6): ~220ms.
Shared LPAR (POWER5)   : ~240ms.

Of this time, approximately 200ms is taken up by __cpu_up(). This is because
we poll every 200ms to check if the new cpu has notified it's presence
through the cpu_callin_map. We repeat this operation until the new cpu sets
the value in cpu_callin_map or 5 seconds elapse, whichever comes earlier.

However, using completion_structs instead of polling loops,
the time taken by the new processor to indicate it's presence has
found to be less than 1ms on pseries. This method however may not
work on all powerpc platforms due to the time-base synchronization code.

Keeping this in mind, we could reduce msleep polling interval from
200ms to 1ms while retaining the 5 second timeout.

With this, the time taken for a cpu online operation changes as follows:
Dedicated LPAR (POWER6): 20-25ms.
Shared LPAR (POWER5)   : 60-80ms.

In both these cases, it was found that the code polls through the loop
only once indicating that 1ms is a reasonable value, atleast on pseries.

The code needs testing on other powerpc platforms.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-27 13:12:54 +10:00
Bastian Blank
6fdc31a2b8 powerpc: Remove SMP warning from PowerMac cpufreq
On Thu, Aug 13, 2009 at 04:14:58PM +1000, Benjamin Herrenschmidt wrote:
> On Tue, 2009-08-11 at 11:39 +0200, Bastian Blank wrote:
> > This patch just disables this driver on SMP kernels, as it is obviously
> > not supported.
> Why not remove the #error instead ? :-) I don't think it's still
> meaningful, especially since we use the timebase for delays nowadays
> which doesn't depend on the CPU frequency...

Your call. Take this one:

The build of a PowerMac 32bit kernel currently fails with

error: #warning "WARNING, CPUFREQ not recommended on SMP kernels"

Thie patch removes the not longer applicable SMP warning from the
PowerMac cpufreq code.

Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-27 13:12:53 +10:00
Josh Boyer
14d757520a powerpc: Fix __flush_icache_range on 44x
The ptrace POKETEXT interface allows a process to modify the text pages of
a child process being ptraced, usually to insert breakpoints via trap
instructions.  The kernel eventually calls copy_to_user_page, which in turn
calls __flush_icache_range to invalidate the icache lines for the child
process.

However, this function does not work on 44x due to the icache being virtually
indexed.  This was noticed by a breakpoint being triggered after it had been
cleared by ltrace on a 440EPx board.  The convenient solution is to do a
flash invalidate of the icache in the __flush_icache_range function.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-27 13:12:52 +10:00
Benjamin Herrenschmidt
ea3cc330ac powerpc/mm: Cleanup handling of execute permission
This is an attempt at cleaning up a bit the way we handle execute
permission on powerpc. _PAGE_HWEXEC is gone, _PAGE_EXEC is now only
defined by CPUs that can do something with it, and the myriad of
#ifdef's in the I$/D$ coherency code is reduced to 2 cases that
hopefully should cover everything.

The logic on BookE is a little bit different than what it was though
not by much. Since now, _PAGE_EXEC will be set by the generic code
for executable pages, we need to filter out if they are unclean and
recover it. However, I don't expect the code to be more bloated than
it already was in that area due to that change.

I could boast that this brings proper enforcing of per-page execute
permissions to all BookE and 40x but in fact, we've had that now for
some time as a side effect of my previous rework in that area (and
I didn't even know it :-) We would only enable execute permission if
the page was cache clean and we would only cache clean it if we took
and exec fault. Since we now enforce that the later only work if
VM_EXEC is part of the VMA flags, we de-fact already enforce per-page
execute permissions... Unless I missed something

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-27 13:12:51 +10:00
Benjamin Herrenschmidt
f480fe3916 Merge commit 'origin/master' into next 2009-08-27 13:12:40 +10:00
Kuninori Morimoto
ea15edb292 sh: Add LCDC Panel support for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:36:10 +09:00
Kuninori Morimoto
2153ad3294 sh: Add CEU support for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:36:10 +09:00
Kuninori Morimoto
fa3ba51bcf sh: Add support LCDC for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:36:10 +09:00
Kuninori Morimoto
907050a33d sh: Add USB support for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:36:09 +09:00
Kuninori Morimoto
35a3540891 sh: Add SH-ETH support for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:36:09 +09:00
Kuninori Morimoto
b7056bc194 sh: modify to enable boot for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:36:09 +09:00
Kuninori Morimoto
b37c7c66f0 sh: fix CPU_SH7723/7724 numbering bug
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:35:46 +09:00
Paul Mundt
e76a0136a3 sh: Fix up sh4_flush_dcache_page() build on UP.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:31:16 +09:00
Frederic Weisbecker
24851d2447 tracing/kprobes: Dump the culprit kprobe in case of kprobe recursion
Kprobes can enter into a probing recursion, ie: a kprobe that does an
endless loop because one of its core mechanism function used during
probing is also probed itself.

This patch helps pinpointing the kprobe that raised such recursion
by dumping it and raising a BUG instead of a warning (we also disarm
the kprobe to try avoiding recursion in BUG itself). Having a BUG
instead of a warning stops the stacktrace in the right place and
doesn't pollute the logs with hundreds of traces that eventually end
up in a stack overflow.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
2009-08-27 02:33:03 +02:00
Masami Hiramatsu
69d991f321 x86: Check awk features before generating inat-tables.c
Check some awk mandatory features to generate inat-tables.c
that old mawk doesn't support.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090821194316.12478.57394.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-27 02:32:50 +02:00
Masami Hiramatsu
8d7d14fb27 x86: Fix x86 instruction decoder selftest to check only .text
Fix x86 instruction decoder selftest to check only .text because other
sections (e.g. .notes) will have random bytes which don't need to be
checked.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090821194307.12478.76938.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-27 02:32:44 +02:00
H. Peter Anvin
b855192c08 Merge branch 'x86/urgent' into x86/pat
Reason: Change to is_new_memtype_allowed() in x86/urgent

Resolved semantic conflicts in:

	 arch/x86/mm/pat.c
	 arch/x86/mm/ioremap.c

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-26 17:24:28 -07:00
Venkatesh Pallipadi
d886c73cd4 x86, pat: Sanity check remap_pfn_range for RAM region
Add sanity check for remap_pfn_range of RAM regions using
lookup_memtype(). Previously, we did not have anyway to get the type of
RAM memory regions as they were tracked using a single bit in
page_struct (WB, nonWB). Now we can get the actual type from page struct
(WB, WC, UC_MINUS) and make sure the requester gets that type.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-26 15:41:35 -07:00
Venkatesh Pallipadi
1087637616 x86, pat: Lookup the protection from memtype list on vm_insert_pfn()
Lookup the reserved memtype during vm_insert_pfn and use that memtype
for the new mapping. This takes care or handling of vm_insert_pfn()
interface in track_pfn_vma*/untrack_pfn_vma.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-26 15:41:32 -07:00
Venkatesh Pallipadi
637b86e75f x86, pat: Add lookup_memtype to get the current memtype of a paddr
Add a new routine lookup_memtype() to get the current memtype based on
the PAT reserves and frees.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-26 15:41:28 -07:00
Venkatesh Pallipadi
f584174096 x86, pat: Use page flags to track memtypes of RAM pages
Change reserve_ram_pages_type and free_ram_pages_type to use 2 page
flags to track UC_MINUS, WC, WB and default types. Previous RAM tracking
just tracked WB or NonWB, which was not complete and did not allow
tracking of RAM fully and there was no way to get the actual type
reserved by looking at the page flags.

We use the memtype_lock spinlock for atomicity in dealing with
memtype tracking in struct page.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-26 15:41:24 -07:00