Commit graph

103,460 commits

Author SHA1 Message Date
Jeremy Fitzhardinge
9387377eb7 xen/privcmd: make privcmd visible in domU
It has its uses in a domU as well as dom0.  Xen will prevent an
unprivileged domain from doing anything untoward.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:29:43 -07:00
Ian Campbell
de1ef2065c xen/privcmd: move remap_domain_mfn_range() to core xen code and export.
This allows xenfs to be built as a module, previously it required flush_tlb_all
and arbitrary_virt_to_machine to be exported.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:34 -07:00
Ian Campbell
f020e29051 privcmd: MMAPBATCH: Fix error handling/reporting
On error IOCTL_PRIVCMD_MMAPBATCH is expected to set the top nibble of
the effected MFN and return 0. Currently it leaves the MFN unmodified
and returns the number of failures. Therefore:

- reimplement remap_domain_mfn_range() using direct
  HYPERVISOR_mmu_update() calls and small batches. The xen_set_domain_pte()
  interface does not report errors and since some failures are
  expected/normal using the multicall infrastructure is too noisy.
- return 0 as expected
- writeback the updated MFN list to mmapbatch->arr not over mmapbatch,
  smashing the caller's stack.
- remap_domain_mfn_range can be static.

With this change I am able to start an HVM domain.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:33 -07:00
Jeremy Fitzhardinge
8e3e99918b xenbus: export xen_store_interface for xenfs
xen_store_interface is needed by xenfs, and xenfs may be a module.

[ Impact: build fix for modular xenfs ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:32 -07:00
Jeremy Fitzhardinge
f31fdf5105 xen/privcmd: make sure vma is ours before doing anything to it
Test vma->vm_ops is our operations to make sure we created it.
We don't want to stomp on other random vmas.

[ Impact: bugfix; prevent ioctl from affecting other mappings ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:32 -07:00
Jeremy Fitzhardinge
441c7416b5 xen/privcmd: print SIGBUS faults
Print more detail about privcmd mapping faults for debugging.

[ Impact: debug ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:31 -07:00
Jeremy Fitzhardinge
35f8c1c343 xen/xenfs: set_page_dirty is supposed to return true if it dirties
I don't think it matters at all in this case (there's only one caller
which checks the return value), but may as well be strictly correct.

[ Impact: cleanup ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:30 -07:00
Jeremy Fitzhardinge
24a89b5be4 xen/privcmd: create address space to allow writable mmaps
These are necessary to allow writeable mmap of the privcmd node to
succeed without being marked read-only for writenotify purposes. Which
in turn is necessary to allow mappings of foreign guest pages

[ Impact: bugfix: allow writable mappings ]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:30 -07:00
Jeremy Fitzhardinge
1c5de1939c xen: add privcmd driver
The privcmd interface in xenfs allows the tool stack in the privileged
domain to get fairly direct access to the hypervisor in order to do
various management things such as domain construction.

[ Impact: new xenfs interface for privileged operations ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:29 -07:00
Ian Campbell
655d406a7c xen: add /proc/xen/xsd_{kva,port} to xenfs
These are used by the userspace xenstore daemon, which runs in dom0.
Xenstored is what's behind the xenfs "xenbus" filesystem.

[ Impact: provide mapping and port to usermode for xenstore ]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20 16:22:26 -07:00
Dmitry Torokhov
9b3056cca0 tpm: change 'tpm_suspend_pcr' to be module parameter
Fix the following warning:

drivers/char/tpm/tpm.c:1085: warning: `tpm_suspend_setup' defined but not used

and make the workaround operable in case when TPM is compiled as a module.
As a side-effect the option will be called tpm.suspend_pcr.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: David Safford <safford@watson.ibm.com>
Cc: James Morris <jmorris@namei.org>
Cc: Debora Velarde <debora@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Morris <jmorris@namei.org>
2010-10-21 10:12:42 +11:00
Greg Kroah-Hartman
150b19d430 Staging: hv: make get_channel_info static
This is done by moving it to the only .c file it is used in.

This also allowed us to delete the channel_interface.h file, as it's no
longer needed.

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-20 16:07:11 -07:00
Greg Kroah-Hartman
a4e91ed24b Staging: hv: vmbus_drv: remove vmbus_child_device_get_info
Just make the call to get_channel_info() directly.

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-20 16:02:49 -07:00
Greg Kroah-Hartman
e957bda0f4 Staging: hv: remove GetChannelInfo from struct vmbus_driver
It was only set to one value, so just make the call to
get_channel_info() directly.

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-20 16:00:37 -07:00
Greg Kroah-Hartman
40bc5360d7 Staging: hv: remove GetInfo pointer from struct vmbus_channel_interface
It's only set by one thing, and never called.

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-20 15:57:19 -07:00
Greg Kroah-Hartman
ee00966818 Staging: hv: remove VmbusGetChannelInfo
It's not needed, make the function pointer point to get_channel_info()
instead.

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-20 15:55:36 -07:00
Greg Kroah-Hartman
50fe56d248 Staging: hv: make alloc_channel static
It's only used in one file, and is a pretty generic name.

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-20 15:51:57 -07:00
Andy Shevchenko
77099f0afe staging: batman-adv: remove useless addr_to_string()
Since all *printf() methods in the kernel understand '%pM' modifier the
conversion to the string is useless beforehand.

Additionally this patch decreases batman_if structure by 20 bytes.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Marek Lindner <lindner_marek@yahoo.de>
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-20 15:48:40 -07:00
Dan Carpenter
85b5aaa624 rbd: passing wrong variable to bvec_kunmap_irq()
We should be passing "buf" here insead of "bv".  This is tricky because
it's not the same as kmap() and kunmap().  GCC does warn about it if you
compile on i386 with CONFIG_HIGHMEM.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:25 -07:00
Dan Carpenter
b8d0638a98 rbd: null vs ERR_PTR
ceph_alloc_page_vector() returns ERR_PTR(-ENOMEM) on errors.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:24 -07:00
Yehuda Sadeh
f4cf3deef4 block: rbd: removing unnecessary test
rbd_get_segment() can't return a negative value, we don't need to check
the return output.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20 15:38:20 -07:00
Vasiliy Kulikov
28f259b7cd block: rbd: fixed may leaks
rbd_client_create() doesn't free rbdc, this leads to many leaks.

seg_len in rbd_do_op() is unsigned, so (seg_len < 0) makes no sense.
Also if fixed check fails then seg_name is leaked.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20 15:38:19 -07:00
Yehuda Sadeh
602adf4002 rbd: introduce rados block device (rbd), based on libceph
The rados block device (rbd), based on osdblk, creates a block device
that is backed by objects stored in the Ceph distributed object storage
cluster.  Each device consists of a single metadata object and data
striped over many data objects.

The rbd driver supports read-only snapshots.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:13 -07:00
Linus Torvalds
7d7c4d06be Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus:
  MIPS: O32 compat/N32: Fix to use compat syscall wrappers for AIO syscalls.
  MAINTAINERS: Change list for ioc_serial to linux-serial.
  SERIAL: ioc3_serial: Return -ENOMEM on memory allocation failure
  MIPS: jz4740: Fix Kbuild Platform file.
  MIPS: Repair Kbuild make clean breakage.
2010-10-20 13:18:21 -07:00
Amit Shah
531295e63b virtio: console: Don't block entire guest if host doesn't read data
If the host is slow in reading data or doesn't read data at all,
blocking write calls not only blocked the program that called write()
but the entire guest itself.

To overcome this, let's not block till the host signals it has given
back the virtio ring element we passed it.  Instead, send the buffer to
the host and return to userspace.  This operation then becomes similar
to how non-blocking writes work, so let's use the existing code for this
path as well.

This code change also ensures blocking write calls do get blocked if
there's not enough room in the virtio ring as well as they don't return
-EAGAIN to userspace.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
CC: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-20 13:18:04 -07:00
Linus Torvalds
30c278192f Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] bsg: fix incorrect device_status value
  [SCSI] Fix VPD inquiry page wrapper
2010-10-20 13:13:09 -07:00
Chris Wilson
b5dc608c98 drm/i915: Copy the updated reloc->presumed_offset back to the user
If the userspace driver is using a constant relocation array with a
static buffer, they will pass the same relocation array back to the
kernel. So we *do* need to update the presumed offset value in those
relocations to reflect the current object so that they remain correct
with future batchbuffers and we avoid the necessity of having to suspend
execution and perform redundant relocations.

Fixes the regression introduced by 12f889c for applications using
absolute addressing on trees of buffer (i.e. the current consumers of
libdrm_intel.so).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30996
Reported-by: Wang, Jinjin <jinjin.wang@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-20 21:06:34 +01:00
Konrad Rzeszutek Wilk
2d7d06dd8f xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c
Without this dependency we get these compile errors:

linux-next-20101020/drivers/xen/biomerge.c: In function 'xen_biovec_phys_mergeable':
linux-next-20101020/drivers/xen/biomerge.c:8: error: dereferencing pointer to incomplete type
linux-next-20101020/drivers/xen/biomerge.c:9: error: dereferencing pointer to incomplete type
linux-next-20101020/drivers/xen/biomerge.c:11: error: implicit declaration of function '__BIOVEC_PHYS_MERGEABLE'

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
2010-10-20 13:04:13 -04:00
Ilkka Koskinen
2764c500be spi/omap2_mcspi: Verify TX reg is empty after TX only xfer with DMA
In case of TX only with DMA, the driver assumes that the data
has been transferred once DMA callback in invoked. However,
SPI's shift register may still contain data. Thus, the driver
is supposed to verify that the register is empty and the end of
the SPI transfer has been reached.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-20 10:43:24 -06:00
Jason Wang
e1993ed642 spi/omap2_mcspi: disable channel after TX_ONLY transfer in PIO mode
In the TX_ONLY transfer, the SPI controller also receives data
simultaneously and saves them in the rx register. After the TX_ONLY
transfer, the rx register will hold the random data received during
the last tx transaction.

If the direct following transfer is RX_ONLY, this random data has the
possibility to affect this transfer like this:
  When the SPI controller is changed from TX_ONLY to RX_ONLY,
  the random data makes the rx register full immediately and
  triggers a dummy write automatically(in SPI RX_ONLY transfers,
  we need a dummy write to trigger the first transaction).

  So the first data received in the RX_ONLY transfer will be that
  random data instead of something meaningful.

We can avoid this by inserting a Disable/Re-enable toggle of the
channel after the TX_ONLY transfer, since it purges the rx register.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-20 10:30:53 -06:00
Jiri Slaby
cb174681a9 HID: hidraw: fix window in hidraw_release
There is a window between hidraw_table check and its dereference.
In that window, the device may be unplugged and removed form the
system and we will then dereference NULL.

Lock that place properly so that either we get NULL and jump out or we
can work with real pointer.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-20 16:54:04 +02:00
Antonio Ospite
569b10a506 HID: hid-sony: override usbhid_output_raw_report for Sixaxis
Override usbhid_output_raw_report in order to force output reports (sent
via hidraw_write, for instance) on the control endpoint.

The Sony Sixaxis (PS3 Controller) accepts output reports only on the
control endpoint, it silently discards them when they arrive over the
interrupt endpoint where usbhid would normally deliver them.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-20 16:50:24 +02:00
Chris Wilson
69dc4987cb drm/i915: Track objects in global active list (as well as per-ring)
To handle retirements, we need per-ring tracking of active objects.
To handle evictions, we need global tracking of active objects.

As we enable more rings, rebuilding the global list from the individual
per-ring lists quickly grows tiresome and overly complicated. Tracking the
active objects in two lists is the lesser of two evils.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-20 10:51:51 +01:00
Chris Wilson
87acb0a550 drm/i915: Simplify most HAS_BSD() checks
... by always initialising the empty ringbuffer it is always then safe
to check whether it is active.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-20 10:51:51 +01:00
Chris Wilson
9af90d19f8 drm/i915: cache the last object lookup during pin_and_relocate()
The most frequent relocation within a batchbuffer is a contiguous sequence
of vertex buffer relocations, for which we can virtually eliminate the
drm_gem_object_lookup() overhead by caching the last handle to object
translation.

In doing so we refactor the pin and relocate retry loop out of
do_execbuffer into its own helper function and so improve the error
paths.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-10-20 10:51:50 +01:00
David S. Miller
5eeaa2db16 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2010-10-20 01:59:48 -07:00
Neil Horman
9ff76c951c netpoll: Remove netpoll blocking from uninit path
Some recent testing in netpoll with bonding showed this backtrace

 ------------[ cut here ]------------
 kernel BUG at drivers/net/bonding/bonding.h:134!
 invalid opcode: 0000 [#1] SMP
 last sysfs file: /sys/devices/pci0000:00/0000:00:1d.2/usb7/devnum
 CPU 0
 Pid: 1876, comm: rmmod Not tainted 2.6.36-rc3+ #10 D26928/
 RIP: 0010:[<ffffffffa0514ba4>]  [<ffffffffa0514ba4>] bond_uninit+0x6f4/0x7a0
 RSP: 0018:ffff88003b1b5d58  EFLAGS: 00010296
 RAX: ffff88003b9b6200 RBX: ffff8800373e8e00 RCX: 00000000000f4240
 RDX: 00000000ffffffff RSI: 0000000000000286 RDI: 0000000000000286
 RBP: ffff88003b1b5dc8 R08: 0000000000000000 R09: 00000001af7de920
 R10: 0000000000000000 R11: ffff880002495e98 R12: ffff880037922700
 R13: ffff880038c31000 R14: ffff880037922730 R15: 0000000000000286
 FS:  00007f90e6d72700(0000) GS:ffff880002400000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 000000346f0d9ad0 CR3: 000000003b263000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process rmmod (pid: 1876, threadinfo ffff88003b1b4000, task ffff88003b36aa80)
 Stack:
 00000000ffffffff ffff88003b1b5d7a ffff8800379221e8 ffff880037922000
 <0> ffff88003b1b5dc8 ffffffff813eb5fb ffff88003b1b5da8 0000000031b177a3
 <0> ffff88003b1b5da8 ffff880037922000 ffff88003b1b5e48 ffff88003b1b5e48
 Call Trace:
 [<ffffffff813eb5fb>] ? rtmsg_ifinfo+0xcb/0xf0
 [<ffffffff813daad8>] rollback_registered_many+0x168/0x280
 [<ffffffff813dac09>] unregister_netdevice_many+0x19/0x80
 [<ffffffff813e97b3>] __rtnl_kill_links+0x63/0x90
 [<ffffffff813e980b>] __rtnl_link_unregister+0x2b/0x60
 [<ffffffff813e9bde>] rtnl_link_unregister+0x1e/0x30
 [<ffffffffa052124b>] bonding_exit+0x37/0x51 [bonding]
 [<ffffffff81098b2e>] sys_delete_module+0x19e/0x270
 [<ffffffff810bb2b2>] ? audit_syscall_entry+0x252/0x280
 [<ffffffff8100b0b2>] system_call_fastpath+0x16/0x1b
 RIP  [<ffffffffa0514ba4>] bond_uninit+0x6f4/0x7a0 [bonding]
 RSP <ffff88003b1b5d58>
 ---[ end trace 1395ad691cea24d1 ]---

It occurs because of my recent netpoll blocking patches, which I added to avoid
recursive deadlock in the bonding driver.  It relies on some per cpu bits, but
the shutdown path forces some rescheduling as we cancel workqueues for the
driver and wait for some device refcounts.  If after the forced reschedule, we
wind up on a different cpu we trigger the bughalt in unblock_netpoll_tx.

The fix is to remove the netpoll block/unblock calls from bond_release_all.
This is safe to do because bond_uninit, which is called via ndo_uninit in
rollback_registered_many, doesn't occur until we send a NETDEV_UNREGISTER event,
which triggers netconsole to remove us as a netpoll client, so we are guaranteed
not to recurse into our own tx path here.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 01:44:29 -07:00
Ingo Molnar
14d4962dc8 Merge branch 'linus' into irq/core
Merge reason: update to almost-final-.36

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-20 04:38:59 +02:00
Dan Williams
42e55736f7 Merge branch 'dma40' into dmaengine 2010-10-19 15:34:26 -07:00
Nicolas Kaiser
9cb047d4d1 dma/timberdale: simplify conditional
Simplify: ((a && b) || (!a && !b)) => (a == b)

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Acked-by: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19 15:20:11 -07:00
Rabin Vincent
51f5d744ed ste_dma40: remove enum for endianess
A bool will suffice.  The default is little endian.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19 15:17:07 -07:00
Rabin Vincent
20a5b6d043 ste_dma40: move mode_opt to separate config
Defaults are "basic mode" for physical channels, and "logical source
logical destination" for logical channels.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19 15:17:07 -07:00
Rabin Vincent
38bdbf020a ste_dma40: move channel mode to a separate field
And keep it logical by default.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19 15:17:07 -07:00
Rabin Vincent
730c187168 ste_dma40: move priority to separate field
And keep it low priority by default.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19 15:17:06 -07:00
Rabin Vincent
ce2ca1252b ste_dma40: add variable to indicate valid dma_cfg
Since we want to reduce the amount of required channel
configuration and remove channel_type, don't depend on it
to indicate whether the configuration is valid.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19 15:17:06 -07:00
Rafael J. Wysocki
9c03439253 PM / Wakeup: Show wakeup sources statistics in debugfs
There may be wakeup sources that aren't associated with any devices
and their statistics information won't be available from sysfs. Also,
for debugging purposes it is convenient to have all of the wakeup
sources statistics available from one place.  For these reasons,
introduce new file "wakeup_sources" in debugfs containing those
statistics.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-19 23:42:49 +02:00
Russell King
809b4e00ba Merge branch 'devel-stable' into devel 2010-10-19 22:06:36 +01:00
Russell King
f779b7dd32 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable
Conflicts:
	arch/arm/mach-at91/include/mach/system.h
	arch/arm/mach-imx/mach-cpuimx27.c

AT91 conflict resolution:
Acked-by: Anders Larsen <al@alarsen.net>
IMX conflict resolution confirmed by Uwe Kleine-König.
2010-10-19 20:12:24 +01:00
Uwe Kleine-König
d38a5edf81 ACPI dock: move some functions to .init.text
find_dock and find_bay are only called by dock_init which lives in
.init.text dock_add is only called by find_dock and find_bay.  So all
three functions can be moved to .init.text, too.

This fixes:

        WARNING: vmlinux.o(.text+0x2134b7): Section mismatch in reference from the function dock_add() to the function .init.text:platform_device_register_resndata()
        The function dock_add() references
        the function __init platform_device_register_resndata().
        This is often because dock_add lacks a __init
        annotation or the annotation of platform_device_register_resndata is wrong.

for a build with unset CONFIG_MODULES.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-19 14:03:04 -04:00
Len Brown
ab7c13c4a5 ACPI: thermal: remove unused limit code
acpi_processor_apply_limit()
acpi_thermal_cpufreq_increase()
acpi_thermal_cpufreq_decrease()

Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-19 13:58:34 -04:00