Commit graph

12,600 commits

Author SHA1 Message Date
Linus Torvalds
09fb6892f3 Devicetree updates for v7.2:
DT core:
 - Add support for handling multiple cells in "iommu-map" entries.
 
 - Support only 1 entry in /reserved-memory "reg" entries. Support for
   more than 1 entry has been broken.
 
 - Fix a UAF on alloc_reserved_mem_array() failure
 
 - Make "ibm,phandle" handling logic specific to PPC
 
 - Use memcpy() instead of strcpy() for known length strings
 
 - Ensure __of_find_n_match_cpu_property() handles malformed "reg"
   entries
 
 - Add various checks that expected strings are strings before accessing
   them
 
 - Drop redundant memset() when unflattening DT
 
 DT bindings:
 - Add a DTS style checker. Currently hooked up to dt_binding_check to
   check examples.
 
 - Convert st,nomadik platform, ti,omap-dmm, and ti,irq-crossbar
   bindings to DT schema
 
 - Add Apple System Management Controller hwmon, Qualcomm Hamoa Embedded
   Controller, Qualcomm IPQ6018 PWM controller, fsl,mc1323, Samsung
   SOFEF01-M DDIC panel, Freescale i.MX53 Television Encoder, Samsung S2M
   series PMIC extcon, and MT6365 PMIC AuxADC schemas
 
 - Extend bindings for QCom Maili and Nord PDC, QCom Hali fastrpc,
   qcom,eliza-imem, qcom,oryon-1-5 CPU, and MT6365 Keys
 
 - Consolidate "sram" property definitions
 
 - Fix constraints on "nvmem" properties which only contain phandles and
   no arg cells
 
 - Another pass of fixing "phandle-array" constraints
 
 - Add Gira vendor prefix
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmoxvkAACgkQ+vtdtY28
 YcMvzhAArPeBiRXPbA10csf2S9wtNuW5SX3rtPS4v87YMNstWpEW20ZGqwpFmns5
 jzAvCjqlhMxpxH43eBM3GqaieU41GxCNGsveIyOnJeIK274hLk4p3kyJ2q6xOQYr
 t2eC1NOiKFnIOM0ASXmIi5orzVnxHPLvcD9bdvcOWI/LMMK3loiY/CK5Cnps/ZaM
 EbCWjxTD3JM+C9P2voaa2vEnpCW0w7Xc3ZXj8S1yxSyuILPcdKJikzP3l/LuEIrL
 iy36q/9+JULMS8ooCN6VO0mZPYmB3DAraepHyJxO/hIJLVkO7O1SMIIcmukaRAbC
 wf6RtdP498WagPxOOmocmh0k1pkAX4KFfqt9N13vKeUmLElWoaSbpp4v/YODlAr3
 w6rSS3Z9Goh6m4ZwnyakENLJjqJdOcJcU9pJHA3EJmTSemChcpQ5GKMf5Sm2fI7O
 nEtsuts+WfD+V2FR9qpHYEO6hNllsneJEk4RpSsHbfZorrQTLkDrJesahWsqKl76
 wMM8ZWrZIs7vPouOim8LzFANL7myRH1wiJHHZIBCKC77sVNE78d0Bs5+Z118zEq1
 eMGybSkbPfLiIYmDWnfnmrRL2+38R45mCzMGdCjhjBMtf0cF88e/TDgXwXiVhpIE
 CcHr0COf0mOM+HZHUt23QPEhJZV93pxiXn4913LZfqh+FIAINyk=
 =0d13
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "DT core:

   - Add support for handling multiple cells in "iommu-map" entries

   - Support only 1 entry in /reserved-memory "reg" entries. Support for
     more than 1 entry has been broken

   - Fix a UAF on alloc_reserved_mem_array() failure

   - Make "ibm,phandle" handling logic specific to PPC

   - Use memcpy() instead of strcpy() for known length strings

   - Ensure __of_find_n_match_cpu_property() handles malformed "reg"
     entries

   - Add various checks that expected strings are strings before
     accessing them

   - Drop redundant memset() when unflattening DT

  DT bindings:

   - Add a DTS style checker. Currently hooked up to dt_binding_check to
     check examples

   - Convert st,nomadik platform, ti,omap-dmm, and ti,irq-crossbar
     bindings to DT schema

   - Add Apple System Management Controller hwmon, Qualcomm Hamoa
     Embedded Controller, Qualcomm IPQ6018 PWM controller, fsl,mc1323,
     Samsung SOFEF01-M DDIC panel, Freescale i.MX53 Television Encoder,
     Samsung S2M series PMIC extcon, and MT6365 PMIC AuxADC schemas

   - Extend bindings for QCom Maili and Nord PDC, QCom Hali fastrpc,
     qcom,eliza-imem, qcom,oryon-1-5 CPU, and MT6365 Keys

   - Consolidate "sram" property definitions

   - Fix constraints on "nvmem" properties which only contain phandles
     and no arg cells

   - Another pass of fixing "phandle-array" constraints

   - Add Gira vendor prefix"

* tag 'devicetree-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
  dt-bindings: interrupt-controller: qcom,pdc: Add Maili compatible string
  dt-bindings: interrupt-controller: ti,irq-crossbar: Convert to DT schema
  dt-bindings: vendor-prefixes: add Gira
  dt-bindings: embedded-controller: Add Qualcomm reference device EC description
  dt-bindings: pwm: add IPQ6018 binding
  dt-bindings: hwmon: Add Apple System Management Controller hwmon schema
  docs: dt: writing-schema: Clarify what is required in a schema
  of: Respect #{iommu,msi}-cells in maps
  of: Factor arguments passed to of_map_id() into a struct
  of: Add convenience wrappers for of_map_id()
  of: reserved_mem: zero total_reserved_mem_cnt if no valid /reserved-memory entry
  of: reserved_mem: handle NULL name in of_reserved_mem_lookup()
  dt-bindings: cache: l2c2x0: Add missing power-domains
  dt-bindings: interrupt-controller: renesas,r9a09g077-icu: Fix reg size in example
  dt-bindings: nvmem: consumer: Make 'nvmem' an array of one-item entries
  drivers/of/overlay: Use memcpy() to copy known length strings
  dt-bindings: add self-test fixtures for style checker
  dt-bindings: wire style checker into dt_binding_check
  scripts/jobserver-exec: propagate child exit status
  dt-bindings: add DTS style checker
  ...
2026-06-17 11:54:57 -07:00
Linus Torvalds
70cb95c736 soc: drivers for 7.2
There are a few added drivers, but mostly the normal maintenance to drivers
 for firmware, memory controller and other soc specific hadware:
 
  - The NXP QuickEngine gets modern MSI support, which allows some cleanups to
    the GICv3 irqchip chip driver
 
  - A new SoC specific driver for the Renesas R-Car MFIS unit is added,
    encapsulating support for the on-chip mailbox and hwspinlock
    implementations that are not easily separated into individual
    drivers
 
  - The Qualcomm SoC drivers add support for additional SoC implementations,
    and flexiblity around power managedment for the serial-engine driver
    as well as probing the LLCC driver using custom hardware descriptions
    inside of the device itself.
 
  - Added support for the Samsung thermal management unit
 
  - A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
    APIs and allow multiple PMC instances everywhere.
 
  - Updates to the TI SCI and KNAS drivers to improve suspend/resume
    support.
 
  - Minor driver changes for mediatek, xilinx, allwinner, aspeed, tegra,
    broadcom, amd, microchip and starfive specific drivers
 
  - Memory controller updates for Tegra and Renesas for additional SoC
    types and other improvements.
 
  - Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces,
    to update driver probing, object lifetimes and address minor bugs.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmow8HMACgkQmmx57+YA
 GNmV4A//WYorQo+qes020w70BAc67/CCVsYpDLDz0mWD5G/uQoQkmyqJTA/b2VnM
 iBzrxJ5lGRP7xkhfDVCfb3wsMNsJV9X4QRLGB13XkXA/vRMZxBd3xKV0K/CWUJYo
 0YJV/BeFDonhbIjTyeZ0ddUvkdOtqn7tua+YiVpRLL4lqV0JzwzQ1mrqKuJ1EFk0
 LWw/oLf+xhcY9X6lae0kranLcR6wauGVu9FLXu2nMtGnn1ErkUfywmd8C1mZ8yLk
 QCEjSNdvjXQKSAFhNhAcNPxEDFqvNqKQEXfa62i3m8rM8mX1/ZJUd49NCEQaOnXm
 ZbeZVHLATf8ut6WKvAwOdtcmvY2HAvBy9xyU7mdiYw3+3hDHQWU068bqYcEbfY6O
 04vhYjnvYnYCZNifH3MvsdMteILN5Eja+dNq7Li2LbnMqbSUHr4gJm0nQcbvsbs0
 x42GsuqtmPy1PL4/9hlwN/eDj+Bce4O2x1ZXl8VoChGRUD1JJXzr4NGDumBv03hA
 eqja4VdMWb9Z/w7y6nlXkx48DibpBJJCgotbYl6DSfJjfGX+jnYrHHcZg5BCIvUc
 X1Fy6236sWBQsj1crNcm2QZ2JWJE28HRYcDq3JGDDGvWkcrkB4c1H0N/rIkO4H5F
 nTW5LgJDTd/KEzq3WOKN+gcHoLjXWl0wKJpb4WQ7sdvcYUTdHx8=
 =27+M
 -----END PGP SIGNATURE-----

Merge tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
 "There are a few added drivers, but mostly the normal maintenance to
  drivers for firmware, memory controller and other soc specific
  hardware:

   - The NXP QuickEngine gets modern MSI support, which allows some
     cleanups to the GICv3 irqchip chip driver

   - A new SoC specific driver for the Renesas R-Car MFIS unit is added,
     encapsulating support for the on-chip mailbox and hwspinlock
     implementations that are not easily separated into individual
     drivers

   - The Qualcomm SoC drivers add support for additional SoC
     implementations, and flexibility around power management for the
     serial-engine driver as well as probing the LLCC driver using
     custom hardware descriptions inside of the device itself.

   - Added support for the Samsung thermal management unit

   - A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
     APIs and allow multiple PMC instances everywhere.

   - Updates to the TI SCI and KNAS drivers to improve suspend/resume
     support.

   - Minor driver changes for mediatek, xilinx, allwinner, aspeed,
     tegra, broadcom, amd, microchip and starfive specific drivers

   - Memory controller updates for Tegra and Renesas for additional SoC
     types and other improvements.

   - Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
     update driver probing, object lifetimes and address minor bugs"

* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
  Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
  Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
  memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
  memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
  memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
  soc: aspeed: cleanup dead default for ASPEED_SOCINFO
  firmware: tegra: bpmp: Add support for multi-socket platforms
  firmware: tegra: bpmp: Propagate debugfs errors
  soc/tegra: pmc: Add Tegra238 support
  soc/tegra: pmc: Restrict power-off handler to Nexus 7
  soc/tegra: pmc: Populate powergate debugfs only when needed
  soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
  soc/tegra: pmc: Remove unused legacy functions
  soc/tegra: pmc: Create PMC context dynamically
  firmware: samsung: acpm: remove compile-testing stubs
  firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
  firmware: samsung: acpm: Add TMU protocol support
  firmware: samsung: acpm: Make acpm_ops const and access via pointer
  firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
  firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
  ...
2026-06-17 11:21:40 -07:00
Charan Teja Kalla
f71f07bee9 of: Factor arguments passed to of_map_id() into a struct
Change of_map_id() to take a pointer to struct of_phandle_args
instead of passing target device node and translated IDs separately.
Update all callers accordingly.

Add an explicit filter_np parameter to of_map_id() and of_map_msi_id()
to separate the filter input from the output. Previously, the target
parameter served dual purpose: as an input filter (if non-NULL, only
match entries targeting that node) and as an output (receiving the
matched node with a reference held). Now filter_np is the explicit
input filter and arg->np is the pure output.

Previously, of_map_id() would call of_node_put() on the matched node
when a filter was provided, making reference ownership inconsistent.
Remove this internal of_node_put() call so that of_map_id() now always
transfers ownership of the matched node reference to the caller via
arg->np. Callers are now consistently responsible for releasing this
reference with of_node_put(arg->np) when done.

Acked-by: Frank Li <Frank.Li@nxp.com>
Suggested-by: Rob Herring (Arm) <robh@kernel.org>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Charan Teja Kalla <charan.kalla@oss.qualcomm.com>
Signed-off-by: Vijayanand Jitta <vijayanand.jitta@oss.qualcomm.com>
Link: https://patch.msgid.link/20260603-parse_iommu_cells-v16-2-dc509dacb19a@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2026-06-12 10:25:39 -05:00
Robin Murphy
d4b52f83f1 of: Add convenience wrappers for of_map_id()
Since we now have quite a few users parsing "iommu-map" and "msi-map"
properties, give them some wrappers to conveniently encapsulate the
appropriate sets of property names. This will also make it easier to
then change of_map_id() to correctly account for specifier cells.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vijayanand Jitta <vijayanand.jitta@oss.qualcomm.com>
Link: https://patch.msgid.link/20260603-parse_iommu_cells-v16-1-dc509dacb19a@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2026-06-12 10:25:39 -05:00
Thierry Reding
5f726aeb50 PCI: tegra: Explicitly specify PMC instance to use
Currently the kernel relies on a global variable to reference the PMC
context. Use an explicit lookup for the PMC and pass that to the public
PMC APIs.

Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2026-05-28 22:46:38 +02:00
Danilo Krummrich
56785dcb2e Linux 7.1-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoTZAYeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKZ0H/A8Ti79DXqEl4M6V
 S1ZYfteuvyWCdygPfY7+CQsxS1EjfmeRXd0213n95jijUoXvAVe7HJ5FuroTltsF
 LYqH3CAedeEWMO1rIZjuDs5J1BzWAh7b0/QoanTlAjI1ZL8c3Btj/o//PoQfztiS
 HWlN/aCcsZTi9n0ewV9eQM9jdiuhBlpZujfDX90vYurxAB+3K2c1b0UN+Y4/zMXO
 83zaDLMYhIh8cEaU52+23H9UpyfrT0B8n6YgqbU4ZBRIbgA1BC4gloT6B7OHFKfq
 PAfjAOBfpe43K8lLUyfbkfNohNblLOboiMmekdf+j2y4wqpCO64o6WigCrZtxtHe
 9znkJpM=
 =H+I9
 -----END PGP SIGNATURE-----

Merge tag 'v7.1-rc5' into driver-core-next

We need the driver-core fixes in here as well to build on top of.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2026-05-25 02:40:57 +02:00
Linus Torvalds
6779b50faa pci-v7.1-fixes-2
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmoPOG4UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxI+RAAosDZtBTmBRnS7t5vSu4U0dPxyhEX
 D3bEQbPdrS3r9JCRFvDRZ0YkNxSOlN4aAY3REYnoqx8ii9tWGBC0yn4W/kZ/zHxR
 W0y63zlC5zbogOfhfOPK54B3PJoeXzJzg2nnG7VoYExREpzZRGHgrtLA1YzqRZFa
 A1usrpHNwnSAZHeAWaSHur9hQYBsrst2QHhot126HyOBMfL5HOTrPe96xrgN0nzH
 /1TGvEeEbEVICXgsPa7BKdU7kcggyVfHN1PUcpbMpDwWr6pZnZLPUnJjLauERs9b
 I1GO/68g94Y1+4MlYwpVIX3R9nx1nZn3LEfwueD9X4JatmsQnah1XmKOv6YUF3pI
 idoVVQTOJI1YggGaPuz3QfM3L5tlmgugqcW6Dd6wKv1JZJpkARjo71HGMt599J0Y
 irDYkliz5mRaFNLH9ENaIEAfHqTXGPm6JCkF+bbxRhbfVHWgv6N4midgfjZ7q2oN
 6++JXuw4PNt5iimtR1pZQLhnmxyQwZKrc/9ZkQ/LxJRVCOfz5/hmGUCMkECR1ypW
 gSX4O+qzR1b0z40XNnloW4OJxiucfieGkqnQsCbgFlwTGIfP0FYdVTK/hl+bMuun
 3WJFZBCA3XrnDv0a8QGkZKp7PSBuaHCDD9zcRwa2JoRfyvweniwTFqDvHaptBFTa
 hKzSLpbWYn9Ez9Y=
 =nGql
 -----END PGP SIGNATURE-----

Merge tag 'pci-v7.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI fixes from Bjorn Helgaas:

 - Remove obsolete PCIe maintainer addresses (Florian Eckert, Hans
   Zhang)

 - Restore a brcmstb link speed assignment that was inadvertently
   removed, reducing bcm2712 performance (Florian Fainelli)

* tag 'pci-v7.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: brcmstb: Assign pcie->gen from of_pci_get_max_link_speed()
  MAINTAINERS: Remove Jianjun Wang as PCIe mediatek maintainer
  MAINTAINERS: Remove Chuanhua Lei as PCIe intel-gw maintainer
2026-05-21 15:02:12 -07:00
Florian Fainelli
ed831e7ea1 PCI: brcmstb: Assign pcie->gen from of_pci_get_max_link_speed()
After commit 03f9209369 ("PCI: controller: Validate max-link-speed"),
pcie->gen stopped being assigned and as a result the established PCIe link
would stop supporting Gen3 speeds on 2712 since pcie->gen is used to
populate LnkCntl2 and LnkCap in brcm_pcie_set_gen().

If the 'max-link-speed' property is not specified, or it exceeds Gen3,
resort to the HW defaults.

Link: https://github.com/raspberrypi/linux/issues/7343
Reported-by: Dom Cobley <popcornmix@gmail.com>
Reported-by: Phil Elwell <phil@raspberrypi.com>
Fixes: 03f9209369 ("PCI: controller: Validate max-link-speed")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hans Zhang <18255117159@163.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260506164537.103196-1-florian.fainelli@broadcom.com
2026-05-15 13:09:52 -05:00
Samiullah Khawaja
f45a49a238 PCI: Initialize temporary device in new_id_store()
When setting new_id of a PCI device driver using sysfs a lockdep splat
occurs. This is because new_id_store() builds a temporary pci_dev for
pci_match_device(), which calls device_match_driver_override().  That
depends on the driver_override.lock added by cb3d1049f4 ("driver core:
generalize driver_override in struct device").

The new driver_override.lock was not initialized in the temporary pci_dev,
resulting in this lockdep splat.

Initialize the temporary pci_dev to fix this.

Repro:

  Build with CONFIG_LOCKDEP=y, boot with QEMU, and add a new ID:

  # echo "8086 10f5" > /sys/bus/pci/drivers/e1000e/new_id

  INFO: trying to register non-static key.
  The code is fine but needs lockdep annotation, or maybe
  you didn't initialize this object before use?
  turning off the locking correctness validator.
  CPU: 2 UID: 0 PID: 177 Comm: liveupdate-iomm Not tainted 7.0.0+ #9 PREEMPT(full)
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x5d/0x80
   register_lock_class+0x77e/0x790
   lock_acquire+0xbf/0x2e0
   pci_match_device+0x24/0x180
   new_id_store+0x189/0x1d0
   kernfs_fop_write_iter+0x14f/0x210
   vfs_write+0x263/0x5e0
   ksys_write+0x79/0xf0
   do_syscall_64+0x117/0xf80

Fixes: 10a4206a24 ("PCI: use generic driver_override infrastructure")
Fixes: 8895d3bcb8 ("PCI: Fail new_id for vendor/device values already built into driver")
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
[bhelgaas: add commit log details and repro, trim backtrace]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260505234327.716630-1-skhawaja@google.com
2026-05-08 15:50:06 -05:00
Lukas Wunner
909f7bf9b0 PCI: Update saved_config_space upon resource assignment
Bernd reports passthrough failure of a Digital Devices Cine S2 V6 DVB
adapter plugged into an ASRock X570S PG Riptide board with BIOS version
P5.41 (09/07/2023):

  ddbridge 0000:05:00.0: detected Digital Devices Cine S2 V6 DVB adapter
  ddbridge 0000:05:00.0: cannot read registers
  ddbridge 0000:05:00.0: fail

BIOS assigns an incorrect BAR to the DVB adapter which doesn't fit into the
upstream bridge window.  The kernel corrects the BAR assignment:

  pci 0000:07:00.0: BAR 0 [mem 0xfffffffffc500000-0xfffffffffc50ffff 64bit]: can't claim; no compatible bridge window
  pci 0000:07:00.0: BAR 0 [mem 0xfc500000-0xfc50ffff 64bit]: assigned

Correction of the BAR assignment happens in an x86-specific fs_initcall,
pcibios_assign_resources(), after device enumeration in a subsys_initcall.
This order was introduced at the behest of Linus in 2004:

  https://git.kernel.org/tglx/history/c/a06a30144bbc

No other architecture performs such a late BAR correction.

Bernd bisected the issue to commit a2f1e22390 ("PCI/ERR: Ensure error
recoverability at all times"), but it only occurs in the absence of commit
4d4c10f763 ("PCI: Explicitly put devices into D0 when initializing").
This combination exists in stable kernel v6.12.70, but not in mainline,
hence Bernd cannot reproduce the issue with mainline.

Since a2f1e22390, config space is saved on enumeration, prior to BAR
correction.  Upon passthrough, the corrected BAR is overwritten with the
incorrect saved value by:

  vfio_pci_core_register_device()
    vfio_pci_set_power_state()
      pci_restore_state()

But only if the device's current_state is PCI_UNKNOWN, as it was prior to
commit 4d4c10f763.  Since the commit, it is PCI_D0, which changes the
behavior of vfio_pci_set_power_state() to no longer restore the state
without saving it first.

Alexandre is reporting the same issue as Bernd, but in his case, mainline
is affected as well.  The difference is that on Alexandre's system, the
host kernel binds a driver to the device which is unbound prior to
passthrough, whereas on Bernd's system no driver gets bound by the host
kernel.

Unbinding sets current_state to PCI_UNKNOWN in pci_device_remove(), so when
vfio-pci is subsequently bound to the device, pci_restore_state() is once
again called without invoking pci_save_state() first.

To robustly fix the issue, always update saved_config_space upon resource
assignment.

Reported-by: Bernd Schumacher <bernd@bschu.de>
Closes: https://lore.kernel.org/r/acfZrlP0Ua_5D3U4@eldamar.lan/
Reported-by: Alexandre N. <an.tech@mailo.com>
Closes: https://lore.kernel.org/r/dd3c3358-de0f-4a56-9c81-04aceaab4058@mailo.com/
Fixes: a2f1e22390 ("PCI/ERR: Ensure error recoverability at all times")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Bernd Schumacher <bernd@bschu.de>
Tested-by: Alexandre N. <an.tech@mailo.com>
Cc: stable@vger.kernel.org # v6.12+
Link: https://patch.msgid.link/febc3f354e0c1f5a9f5b3ee9ffddaa44caccf651.1776268054.git.lukas@wunner.de
2026-05-08 15:50:06 -05:00
Keith Busch
cfcbfe5cb1 PCI: Don't fallback to bus reset after failed slot reset
If a bus has hotplug slots that implement the slot's reset_slot callback,
it is not safe to do the non-slot specific bus reset, so don't fallback to
it. If a slot reset does fail, the subsequent bus reset will attempt a 2nd
link reset on top of previous and fail to handle the hotplug events.

Fixes: 8238cb69c0 ("PCI: Make reset_subordinate hotplug safe")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260421150644.3543733-1-kbusch@meta.com
2026-04-27 17:26:59 -05:00
Douglas Anderson
4aca5e62f3 driver core: Replace dev->of_node_reused with dev_of_node_reused()
In C, bitfields are not necessarily safe to modify from multiple
threads without locking. Switch "of_node_reused" over to the "flags"
field so modifications are safe.

Cc: Johan Hovold <johan@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # PCI_PWRCTRL
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260406162231.v5.8.I806b8636cd3724f6cd1f5e199318ab8694472d90@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2026-04-26 23:50:20 +02:00
Linus Torvalds
ff57d59200 LoongArch changes for v7.1
1, Adjust build infrastructure for 32BIT/64BIT;
 2, Add HIGHMEM (PKMAP and FIX_KMAP) support;
 3, Show and handle CPU vulnerabilites correctly;
 4, Batch the icache maintenance for jump_label;
 5, Add more atomic instructions support for BPF JIT;
 6, Add more features (e.g. fsession) support for BPF trampoline;
 7, Some bug fixes and other small changes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmnpwWgWHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImeiAXD/0RSRhj2y8LYGhVSPStMgN4uwMl
 1ylbkRg0biTvV0g8sD1R3MQ58/tKBZY5wTeLjwT50rl+JgOqVdrN6OMAxjwOKzJ6
 7C0rgpxBG5/YHI93paFVIYszsiWhRQaB5qfZCUOr230ZDJzvnfF1aH6JLybeHoMp
 HvERNURQsRbZo9yc69YxhrmHETEbum37u9hsrY5mJSEs5Fh+QxvTSYjE36z3Dtal
 YFqopTCaBgAhVw6BldVAcyvGvVK+d6iQEA035jObNLKKReNkwsQixxgnJhDSkbbG
 Z3md+hWp+YQQElGIP5q6+rj1rJZGrs/XL3HAnTQfXN+8bXIUO9AOf2/l5f9fZx7o
 2Vtt8n2/vVdzsVnKiHXGtsZ5uXrw4/kLiMZSCrUMZCtEOxJV9mmrVskPeie0iq0/
 nDG9uCgRldL8Xpg7d5NM9coECui3J+ztNkv06tL/JLm02bJPuqNwt3FeA1T/aH1c
 l2Hpw3Xuzl7lYuAYoa5CMm4X6yD/RA6w44pW1NKnb6j6llIOk6V6NwcwggWUnqht
 oB5VIqPKMOYjZ+fLurI2o9VWqWokJxDdzyrHhXyaG0JRK9Vak06C8UI5BQuosu88
 9WBoxK77PyNa60m56C32OZ5tu4UoPT8PgZWXDQDwn82SWzuYKWRruS2ng5A/JF7r
 H2Ez4iBjs2/P7vTQHA==
 =FiFl
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Adjust build infrastructure for 32BIT/64BIT

 - Add HIGHMEM (PKMAP and FIX_KMAP) support

 - Show and handle CPU vulnerabilites correctly

 - Batch the icache maintenance for jump_label

 - Add more atomic instructions support for BPF JIT

 - Add more features (e.g. fsession) support for BPF trampoline

 - Some bug fixes and other small changes

* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
  selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
  LoongArch: BPF: Add fsession support for trampolines
  LoongArch: BPF: Introduce emit_store_stack_imm64() helper
  LoongArch: BPF: Support up to 12 function arguments for trampoline
  LoongArch: BPF: Support small struct arguments for trampoline
  LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
  LoongArch: BPF: Support load-acquire and store-release instructions
  LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
  LoongArch: BPF: Add the default case in emit_atomic() and rename it
  LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
  LoongArch: Batch the icache maintenance for jump_label
  LoongArch: Add flush_icache_all()/local_flush_icache_all()
  LoongArch: Add spectre boundry for syscall dispatch table
  LoongArch: Show CPU vulnerabilites correctly
  LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
  LoongArch: Use get_random_canary() for stack canary init
  LoongArch: Improve the logging of disabling KASLR
  LoongArch: Align FPU register state to 32 bytes
  LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
  LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
  ...
2026-04-24 09:54:45 -07:00
Linus Torvalds
45dcf5e288 PCMCIA fixes and cleanups for v7.1
A number of minor PCMCIA bugfixes and cleanups, and a patch removing
 obsolete host controller drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCgA5FiEEmgXaWKgmjrvkPhLCmpdgiUyNow0FAmnqWwIbHGxpbnV4QGRv
 bWluaWticm9kb3dza2kubmV0AAoJEJqXYIlMjaMNifYP/R89OwUCazfebvE+mzTT
 Nlj11sxOaMF9ZMDkWZlP49TkoBZjQ9MEb6hGgw99SLLf5bYoHQFHZ0RMIwM/7UXv
 y66ZLqfuGgdenUre8QROsYP1uegO4gh41aRm9a7cswoAkNlnIgKhH1k2/jhRwlXT
 rrl2CObgkdAtpnZDb2GFyjL2Y5VEKoKJf3nrNlDs1R4NBDVmfisojlfLeYFGGBsq
 CESwNcj9eEj+NuUhdWOmHXjXOvsDxk2PpTUEettswcdInOj8MApScbmyj/UqCX6A
 RTI/myAeLeGTMgTrZCfIqhCiaZbBdVcoKYakRfAZVyM1KuHQo/PmAlMPhv5C4lRT
 V8Fqz3RTtcYxblTMoxWh8pMaCKoH905YIINs54rkFwAqgq6TXgu26QdZtH+YR2V/
 /0JI613MfSDhC2WwEF3j+sW0WlCnGSFZ5yzUZQmoQYf4US3ZOhp1JgaK+18QtqUa
 00e0OQkLNN03Nj7UcoMfLHANOBVjLV8C8U+zkHT1t5AI4bRlP8FSTNrFP0f2VKWZ
 rm0S7CWovRS9mewOOXVHv2Wo0bxSaBsBxrD2G8n1PRE96xpXZvjuUKQtSyX6Totk
 lacS2HziABD7IiuKH0djC1MPPZkbZcct3TO8PggVYkrDa9nyQAsG4Z2+S85f8+Qg
 ALVHDj4B4bbJEVyn4duU9y+F
 =y3cK
 -----END PGP SIGNATURE-----

Merge tag 'pcmcia-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux

Pull PCMCIA updates from Dominik Brodowski:
 "A number of minor PCMCIA bugfixes and cleanups, and a patch removing
  obsolete host controller drivers"

* tag 'pcmcia-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: remove obsolete host controller drivers
  pcmcia: Convert to use less arguments in pci_bus_for_each_resource()
  PCMCIA: Fix garbled log messages for KERN_CONT
2026-04-23 11:22:16 -07:00
Linus Torvalds
2a4c0c11c0 s390 updates for 7.1 merge window
- Add support for CONFIG_PAGE_TABLE_CHECK and enable it in
   debug_defconfig. s390 can only tell user from kernel PTEs via the mm,
   so mm_struct is now passed into pxx_user_accessible_page() callbacks
 
 - Expose the PCI function UID as an arch-specific slot attribute in
   sysfs so a function can be identified by its user-defined id while
   still in standby. Introduces a generic ARCH_PCI_SLOT_GROUPS hook in
   drivers/pci/slot.c
 
 - Refresh s390 PCI documentation to reflect current behavior and cover
   previously undocumented sysfs attributes
 
 - zcrypt device driver cleanup series: consistent field types, clearer
   variable naming, a kernel-doc warning fix, and a comment explaining
   the intentional synchronize_rcu() in pkey_handler_register()
 
 - Provide an s390 arch_raw_cpu_ptr() that avoids the detour via
   get_lowcore() using alternatives, shrinking defconfig by ~27 kB
 
 - Guard identity-base randomization with kaslr_enabled() so nokaslr
   keeps the identity mapping at 0 even with
   CONFIG_RANDOMIZE_IDENTITY_BASE=y
 
 - Build S390_MODULES_SANITY_TEST as a module only by requiring
   KUNIT && m, since built-in would not exercise module loading
 
 - Remove the permanently commented-out HMCDRV_DEV_CLASS create_class()
   code in the hmcdrv driver
 
 - Drop stale ident_map_size extern conflicting with asm/page.h
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmno78kACgkQjYWKoQLX
 FBiHbggAmW5hPIDf4F8HLomMREaaQb7QAyYwfeefwhcFUXSMu8td8S68aN4UkOnS
 DGSFjb+V6Nqd+ewrF7IS9pRU9YFsmBqo3MnLdcJ/ojZFz8BlwoAi+E4AD1a38hY2
 9zh2siPBMjydqBRUn6zjsK8auk4e8r44iS5MNNMXDF2ePE/PnPKTm93GhbtnnM6r
 a7mQkiPbi6j0sN/UU+pQkhS4fm2XNaGpCGGX0W0v2RdLIYZ9zQQdg4TaEsjQ5wZA
 OC3P8LG3OyJjnxsY2J8PIKK0VM0JP67KUGnQOi1y8HbN1LkFfAWF6CK7tsyUE/JM
 TYg7ENs2mUMmaa8niOGkiXzjjAxD0g==
 =NpmP
 -----END PGP SIGNATURE-----

Merge tag 's390-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

 - Add support for CONFIG_PAGE_TABLE_CHECK and enable it in
   debug_defconfig. s390 can only tell user from kernel PTEs via the mm,
   so mm_struct is now passed into pxx_user_accessible_page() callbacks

 - Expose the PCI function UID as an arch-specific slot attribute in
   sysfs so a function can be identified by its user-defined id while
   still in standby. Introduces a generic ARCH_PCI_SLOT_GROUPS hook in
   drivers/pci/slot.c

 - Refresh s390 PCI documentation to reflect current behavior and cover
   previously undocumented sysfs attributes

 - zcrypt device driver cleanup series: consistent field types, clearer
   variable naming, a kernel-doc warning fix, and a comment explaining
   the intentional synchronize_rcu() in pkey_handler_register()

 - Provide an s390 arch_raw_cpu_ptr() that avoids the detour via
   get_lowcore() using alternatives, shrinking defconfig by ~27 kB

 - Guard identity-base randomization with kaslr_enabled() so nokaslr
   keeps the identity mapping at 0 even with RANDOMIZE_IDENTITY_BASE=y

 - Build S390_MODULES_SANITY_TEST as a module only by requiring KUNIT &&
   m, since built-in would not exercise module loading

 - Remove the permanently commented-out HMCDRV_DEV_CLASS create_class()
   code in the hmcdrv driver

 - Drop stale ident_map_size extern conflicting with asm/page.h

* tag 's390-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/zcrypt: Fix warning about wrong kernel doc comment
  PCI: s390: Expose the UID as an arch specific PCI slot attribute
  docs: s390/pci: Improve and update PCI documentation
  s390/pkey: Add comment about synchronize_rcu() to pkey base
  s390/hmcdrv: Remove commented out code
  s390/zcrypt: Slight rework on the agent_id field
  s390/zcrypt: Explicitly use a card variable in _zcrypt_send_cprb
  s390/zcrypt: Rework MKVP fields and handling
  s390/zcrypt: Make apfs a real unsigned int field
  s390/zcrypt: Rework domain processing within zcrypt device driver
  s390/zcrypt: Move inline function rng_type6cprb_msgx from header to code
  s390/percpu: Provide arch_raw_cpu_ptr()
  s390: Enable page table check for debug_defconfig
  s390/pgtable: Add s390 support for page table check
  s390/pgtable: Use set_pmd_bit() to invalidate PMD entry
  mm/page_table_check: Pass mm_struct to pxx_user_accessible_page()
  s390/boot: Respect kaslr_enabled() for identity randomization
  s390/Kconfig: Make modules sanity test a module-only option
  s390/setup: Drop stale ident_map_size declaration
2026-04-22 11:13:45 -07:00
Linus Torvalds
8fd12b03c7 hyperv-next for v7.1
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmnobFATHHdlaS5saXVA
 a2VybmVsLm9yZwAKCRB2FHBfkEGgXhafB/wMvf8yu4FgapbSRIlPboeW/ONDyuHd
 k0y1a0IFMQLspWfCxK8+snEcHT3g9xzG3ksqcnac0SPgzqxQ4dlK/c7Xr+5EBXuf
 TEt/bHrt6KT5BUpb1k/XxcdoObCsvZd3vfqR020OsHijw1Ni9PrdqeZxk56/vFJs
 nvgyKvsrAEyfALOH1Vgwg0gNWpqJBj1KcT3Kl1o4p5lwQzVpUREZii6RyvgXT/pu
 mckN63FrEPOpDaJllHmCPcfFSzqNi+wFQcFxm35w9rDQsVdnMsRWoJbcXNYW5QGM
 +KOZ1/tzw4Z3queW78hcxsH6sXiElLDsJgtDohBhxbVvUXy+xHrJCOm5
 =4Ke3
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull Hyper-V updates from Wei Liu:

 - Fix cross-compilation for hv tools (Aditya Garg)

 - Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain)

 - Limit channel interrupt scan to relid high water mark (Michael
   Kelley)

 - Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui)

 - Fix cleanup and shutdown issues for MSHV (Jork Loeser)

 - Introduce more tracing support for MSHV (Stanislav Kinsburskii)

* tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Skip LP/VP creation on kexec
  x86/hyperv: move stimer cleanup to hv_machine_shutdown()
  Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing
  mshv: Add tracepoint for GPA intercept handling
  mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
  tools: hv: Fix cross-compilation
  Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
  mshv: Introduce tracing support
  Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark
2026-04-22 09:50:46 -07:00
Huacai Chen
3d9aba6618 LoongArch: Adjust build infrastructure for 32BIT/64BIT
Adjust build infrastructure (Kconfig, Makefile and ld scripts) to let
us enable both 32BIT/64BIT kernel build.

Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2026-04-22 15:44:26 +08:00
Linus Torvalds
40286d6379 pci-v7.1-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmnfwfMUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxwIRAAlN1h5er8aFDbjON5YMXBZqlQmzaC
 bjlUHgwm7HkdErTFozyuqhE8QUO1kCm4uMQzeyJdfY9nRWqMDOuKYxMD5j0exk+o
 4tbbJg6Xx4dq7Qrawy9PhxyQm/PDAcvs+FRRlGala+qq9o3fxPDOAZVDE/1C8qFQ
 Jd7GGd7NZn/NN4xrqST4RQHjO8fwaMwmksWCStsb79kfesQWP6kLADGfIMcWxNUB
 2s+oTnK6Hw0tkBv56n6i8mbb0EzS3/RN1daTevGAta1rmfUVVtWGRZ4paMvv0Owi
 Rl5+O5Jz6/c1qiXZbUqu5CRQPIy7Dr3JPvURcZX6qbsV8PzWXZr0Wi+geWefGOnp
 55y+3OT0vdBGAuXLJhrcU7Clzq9D/TZOt8oTI8IFArUfDlmrAIdozPn7gr+VGre5
 QuKymSk3XWtyIbe4o8UeZ4f9g0y6ZY1XvtvB7K1tze+OOmqlkfq966+z8aZuGOKx
 ZvAU/NIat5H02EgB4dEVOP8R5vPZlXGT0RLGl1JWRypPWyZDbVVA3z927qRQG5md
 IsVq8WaIrB1zyl9g37lZeEaYwP/qCIQsHkMGPYcP4wdOQEV9AQqi5pmjMXnWyQJD
 PR1nvmTKW7USRCJ+pz8xPhZh0cj3ENaddORTD3I/0CGVV0y452bU/5rr4T+K04bK
 PCJBpxTIDuWDwXc=
 =FFRz
 -----END PGP SIGNATURE-----

Merge tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
     P)

   - Enable AtomicOps only if we know the Root Port supports them (Gerd
     Bayer)

   - Don't enable AtomicOps for RCiEPs since none of them need Atomic
     Ops and we can't tell whether the Root Complex would support them
     (Gerd Bayer)

   - Leave Precision Time Measurement disabled until a driver enables it
     to avoid PCIe errors (Mika Westerberg)

   - Make pci_set_vga_state() fail if bridge doesn't support VGA
     routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
     errors to vga_get() callers including userspace via
     /dev/vga_arbiter (Simon Richter)

   - Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
     rzg3s drivers (where the actual controller constraints are known),
     and remove validation from the generic OF DT accessor (Hans Zhang)

   - Remove pc110pad driver (no longer useful after 486 CPU support
     removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
     Torokhov, Heiner Kallweit)

  Resource management:

   - Prevent assigning space to unimplemented bridge windows; previously
     we mistakenly assumed prefetchable window existed and assigned
     space and put a BAR there (Ahmed Naseef)

   - Avoid shrinking bridge windows to fit in the initial Root Port
     window; fixes one problem with devices with large BARs connected
     via switches, e.g., Thunderbolt (Ilpo Järvinen)

   - Pass full extent of empty space, not just the aligned space, to
     resource_alignf callback so free space before the requested
     alignment can be used (Ilpo Järvinen)

   - Place small resources before larger ones for better utilization of
     address space (Ilpo Järvinen)

   - Fix alignment calculation for resource size larger than align,
     e.g., bridge windows larger than the 1MB required alignment (Ilpo
     Järvinen)

  Reset:

   - Update slot handling so all ARI functions are treated as being in
     the same slot. They're all reset by Secondary Bus Reset, but
     previously drivers of ARI functions that appeared to be on a
     non-zero device weren't notified and fatal hardware errors could
     result (Keith Busch)

   - Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
     events (Keith Busch)

   - Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
     by CXL because it has no effect (Vidya Sagar)

   - Avoid FLR for AMD NPU device, where it causes the device to hang
     (Lizhi Hou)

  Error handling:

   - Clear only error bits in PCIe Device Status to avoid accidentally
     clearing Emergency Power Reduction Detected (Shuai Xue)

   - Check for AER errors even in devices without drivers (Lukas Wunner)

   - Initialize ratelimit info so DPC and EDR paths log AER error
     information (Kuppuswamy Sathyanarayanan)

  Power control:

   - Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
     generic pwrctrl driver can control it (Neil Armstrong)

  Hotplug:

   - Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
     doesn't complain when setting brightness fails because the endpoint
     is gone (Richard Cheng)

  Peer-to-peer DMA:

   - Allow wildcards in list of host bridges that support peer-to-peer
     DMA between hierarchy domains and add all Google SoCs (Jacob
     Moroni)

  Endpoint framework:

   - Advertise dynamic inbound mapping support in pci-epf-test and
     update host pci_endpoint_test to skip doorbell testing if not
     advertised by endpoint (Koichiro Den)

   - Return 0, not remaining timeout, when MHI eDMA ops complete so
     mhi_ep_ring_add_element() doesn't interpret non-zero as failure
     (Daniel Hodges)

   - Remove vntb and ntb duplicate resource teardown that leads to oops
     when .allow_link() fails or .drop_link() is called (Koichiro Den)

   - Disable vntb delayed work before clearing BAR mappings and
     doorbells to avoid oops caused by doing the work after resources
     have been torn down (Koichiro Den)

   - Add a way to describe reserved subregions within BARs, e.g.,
     platform-owned fixed register windows, and use it for the RK3588
     BAR4 DMA ctrl window (Koichiro Den)

   - Add BAR_DISABLED for BARs that will never be available to an EPF
     driver, and change some BAR_RESERVED annotations to BAR_DISABLED
     (Niklas Cassel)

   - Add NTB .get_dma_dev() callback for cases where DMA API requires a
     different device, e.g., vNTB devices (Koichiro Den)

   - Add reserved region types for MSI-X Table and PBA so Endpoint
     controllers can them as describe hardware-owned regions in a
     BAR_RESERVED BAR (Manikanta Maddireddy)

   - Make Tegra194/234 BAR0 programmable and remove 1MB size limit
     (Manikanta Maddireddy)

   - Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
     (Manikanta Maddireddy)

   - Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
     (Manikanta Maddireddy)

   - Skip the BAR subrange selftest if there are not enough inbound
     window resources to run the test (Christian Bruel)

  New native PCIe controller drivers:

   - Add DT binding and driver for Andes QiLai SoC PCIe host controller
     (Randolph Lin)

   - Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
     Zhang)

  Baikal T-1 PCIe controller driver:

   - Remove driver since it never quite became usable (Andy Shevchenko)

  Cadence PCIe controller driver:

   - Implement byte/word config reads with dword (32-bit) reads because
     some Cadence controllers don't support sub-dword accesses (Aksh
     Garg)

  CIX Sky1 PCIe controller driver:

   - Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)

  Freescale i.MX6 PCIe controller driver:

   - Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
     Zhu)

   - Delay instead of polling for L2/L3 Ready after PME_Turn_off when
     suspending i.MX6SX because LTSSM registers are inaccessible
     (Richard Zhu)

   - Separate PERST# assertion (for resetting endpoints) from core reset
     (for resetting the RC itself) to prepare for new DTs with PERST#
     GPIO in per-Root Port nodes (Sherry Sun)

   - Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
     MSI from downstream devices will work (Richard Zhu)

   - Fix i.MX95 reference clock source selection when internal refclk is
     used (Franz Schnyder)

  Freescale Layerscape PCIe controller driver:

   - Allow building as a removable module (Sascha Hauer)

  MediaTek PCIe Gen3 controller driver:

   - Use dev_err_probe() to simplify error paths and make deferred probe
     messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
     Tsai)

   - Power off device if setup fails (Chen-Yu Tsai)

   - Integrate new pwrctrl API to enable power control for WiFi/BT
     adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)

  NVIDIA Tegra194 PCIe controller driver:

   - Poll less aggressively and non-atomically for PME_TO_Ack during
     transition to L2 (Vidya Sagar)

   - Disable LTSSM after transition to Detect on surprise link down to
     stop toggling between Polling and Detect (Manikanta Maddireddy)

   - Don't force the device into the D0 state before L2 when suspending
     or shutting down the controller (Vidya Sagar)

   - Disable PERST# IRQ only in Endpoint mode because it's not
     registered in Root Port mode (Manikanta Maddireddy)

   - Handle 'nvidia,refclk-select' as optional (Vidya Sagar)

   - Disable direct speed change in Endpoint mode so link speed change
     is controlled by the host (Vidya Sagar)

   - Set LTR values before link up to avoid bogus LTR messages with 0
     latency (Vidya Sagar)

   - Allow system suspend when the Endpoint link is down (Vidya Sagar)

   - Use DWC IP core version, not Tegra custom values, to avoid DWC core
     version check warnings (Manikanta Maddireddy)

   - Apply ECRC workaround to devices based on DesignWare 5.00a as well
     as 4.90a (Manikanta Maddireddy)

   - Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
     erratum (Vidya Sagar)

   - Delay post-PERST# cleanup until core is powered on to avoid CBB
     timeout (Manikanta Maddireddy)

   - Assert CLKREQ# so switches that forward it to their downstream side
     can bring up those links successfully (Vidya Sagar)

   - Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
     from any previous bad link state (Vidya Sagar)

   - Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
     DMA driver and Endpoint controller driver can share the interrupt
     line (Vidya Sagar)

   - Enable DMA interrupt to support DMA in both Root Port and Endpoint
     modes (Vidya Sagar)

   - Enable hardware link retraining after link goes down in Endpoint
     mode (Vidya Sagar)

   - Add DT binding and driver support for core clock monitoring (Vidya
     Sagar)

  Qualcomm PCIe controller driver:

   - Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
     since Qcom Root Ports support hotplug events like DL_Up/Down and
     can accept writes to Slot Control without delays between writes
     (Krishna Chaitanya Chundru)

  Renesas R-Car PCIe controller driver:

   - Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)

   - Reduce EPC BAR alignment requirement to 4K (Koichiro Den)

  Renesas RZ/G3S PCIe controller driver:

   - Add RZ/G3E to DT binding and to driver (John Madieu)

   - Assert (not deassert) resets in probe error path (John Madieu)

   - Assert resets in suspend path in reverse order they were deasserted
     during probe (John Madieu)

   - Rework inbound window algorithm to prevent mapping more than
     intended region and enforce alignment on size, to prepare for
     RZ/G3E support (John Madieu)

  Rockchip DesignWare PCIe controller driver:

   - Add tracepoints for PCIe controller LTSSM transitions and link rate
     changes (Shawn Lin)

   - Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
     Lin)

  SOPHGO PCIe controller driver:

   - Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
     advertise support for them (Yao Zi)

  Synopsys DesignWare PCIe controller driver:

   - Continue with system suspend even if an Endpoint doesn't respond
     with PME_TO_Ack message (Manivannan Sadhasivam)

   - Set Endpoint MSI-X Table Size in the correct function of a
     multi-function device when configuring MSI-X, not in Function 0
     (Aksh Garg)

   - Set Max Link Width and Max Link Speed for all functions of a
     multi-function device, not just Function 0 (Aksh Garg)

   - Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)

  Miscellaneous:

   - Warn only once about invalid ACS kernel parameter format (Richard
     Cheng)

   - Suppress FW_BUG warning when writing sysfs 'numa_node' with the
     current value (Li RongQing)

   - Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"

* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
  PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
  PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
  PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
  PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
  PCI: tegra194: Add core monitor clock support
  dt-bindings: PCI: tegra194: Add monitor clock support
  PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
  PCI: tegra194: Enable DMA interrupt
  PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
  PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
  PCI: tegra194: Assert CLKREQ# explicitly by default
  PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
  PCI: tegra194: Disable L1.2 capability of Tegra234 EP
  PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
  PCI: tegra194: Use DWC IP core version
  PCI: tegra194: Free up Endpoint resources during remove()
  PCI: tegra194: Allow system suspend when the Endpoint link is not up
  PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
  PCI: tegra194: Disable direct speed change for Endpoint mode
  PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
  ...
2026-04-15 14:41:21 -07:00
Dexuan Cui
0d5acba633 Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
With commit f84b21da36 ("PCI: hv: Don't load the driver for baremetal root partition"),
the bare metal Linux root partition won't use the pci-hyperv driver, but
when a Linux VM runs on the Linux root partition, pci-hyperv's module_init
function init_hv_pci_drv() can still run, e.g. in the case of
CONFIG_PCI_HYPERV=y, even if the VMBus driver is not used in such a VM
(i.e. the hv_vmbus driver's init function returns -ENODEV due to
vmbus_root_device being NULL).

In such a Linux VM, init_hv_pci_drv() runs with a side effect: the 3
hvpci_block_ops callbacks are set to functions that depend on hv_vmbus.

Later, when the MLX driver in such a VM invokes the callbacks, e.g. in
drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c:
mlx5_hv_register_invalidate(), hvpci_block_ops.reg_blk_invalidate() is
hv_register_block_invalidate() rather than a NULL function pointer, and
hv_register_block_invalidate() assumes that it can find a struct
hv_pcibus_device from pdev->bus->sysdata, which is false in such a VM.

Consequently, hv_register_block_invalidate() -> get_pcichild_wslot() ->
spin_lock_irqsave() may hang since it can be accessing an invalid
spinlock pointer.

Fix the issue by exporting hv_vmbus_exists() and using it in pci-hyperv:

    hv_root_partition() is true and hv_nested is false ==>
	hv_vmbus_exists() is false.

    hv_root_partition() is true and hv_nested is true ==>
	hv_vmbus_exists() is true.

    hv_root_partition() is false ==> hv_vmbus_exists() is true.

While at it, rename vmbus_exists() to hv_vmbus_exists() to follow the
convention that all public functions have the hv_ prefix; also change
the return value's type from int to bool to make the code more readable;
also move the two pr_info() calls.

Reported-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-04-14 04:42:44 +00:00
Linus Torvalds
2e31b16101 ACPI support updates for 7.1-rc1
- Update maintainers information regarding ACPICA (Rafael Wysocki)
 
  - Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy() (Kees
    Cook)
 
  - Trigger an ordered system power off after encountering a fatal error
    operator in AML (Armin Wolf)
 
  - Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)
 
  - Remove the temporary stop-gap acpi_pptt_cache_v1_full structure from
    the ACPI PPTT parser (Ben Horgan)
 
  - Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
    DeSimone)
 
  - Address multiple assorted issues and clean up the code in the ACPI
    processor idle driver (Huisong Li)
 
  - Replace strlcat() in the ACPI processor idle drive with a better
    alternative (Andy Shevchenko)
 
  - Rearrange and clean up acpi_processor_errata_piix4() (Rafael Wysocki)
 
  - Move reference performance to capabilities and fix an uninitialized
    variable in the ACPI CPPC library (Pengjie Zhang)
 
  - Add support for the Performance Limited Register to the ACPI CPPC
    library (Sumit Gupta)
 
  - Add cppc_get_perf() API to read performance controls, extend
    cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
    library warn on missing mandatory DESIRED_PERF register (Sumit Gupta)
 
  - Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in target
    callbacks to allow it to control performance bounds via standard
    scaling_min_freq and scaling_max_freq sysfs attributes and add sysfs
    documentation for the Performance Limited Register to it (Sumit Gupta)
 
  - Add ACPI support to the platform device interface in the CMOS RTC
    driver, make the ACPI core device enumeration code create a platform
    device for the CMOS RTC, and drop CMOS RTC PNP device support (Rafael
    Wysocki)
 
  - Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
    driver and clean up the CMOS RTC ACPI address space handler (Rafael
    Wysocki)
 
  - Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
    and allow that driver to work without a dedicated IRQ if the ACPI
    alarm is used (Rafael Wysocki)
 
  - Clean up the ACPI TAD driver in various ways and add an RTC class
    device interface, including both the RTC setting/reading and alarm
    timer support, to it (Rafael Wysocki)
 
  - Clean up the ACPI AC and ACPI PAD (processor aggregator device)
    drivers (Rafael Wysocki)
 
  - Rework checking for duplicate video bus devices and consolidate
    pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
    Wysocki)
 
  - Update the ACPI core device drivers to stop setting acpi_device_name()
    unnecessarily (Rafael Wysocki)
 
  - Rearrange code using acpi_device_class() in the ACPI core device
    drivers and update them to stop setting acpi_device_class()
    unnecessarily (Rafael Wysocki)
 
  - Define ACPI_AC_CLASS in one place (Rafael Wysocki)
 
  - Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
    bind to platform devices instead of ACPI devices (Rafael Wysocki)
 
  - Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
    hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
    Feng)
 
  - Consolidate the interface for obtaining a CPU UID from ACPI across
    architectures and use it to address incorrect PCI TPH Steering Tag
    on ARM64 resulting from the invalid assumption that the ACPI
    Processor UID would always be the same as the corresponding logical
    CPU ID in Linux (Chengwen Feng)
 -----BEGIN PGP SIGNATURE-----
 
 iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmnY/bcSHHJqd0Byand5
 c29ja2kubmV0AAoJEO5fvZ0v1OO1chAH/1cGRzh9lSgQ3ZdzIIA5rpRtwKC+CTNz
 iNDvQ97W73B2N+WYzMaloOh+ZVA1Vdqc+8921aH6HI+v7wtg/ZV3h/hU7TagHNY/
 bRFDYaeRXVj4aBXNfoVdn7G5UU9j/kIDcV25I2ubOBqZaO6T5p8p1BK0j0vEj+sG
 yR7XwpEhr2OUQwlIFGKskJwFaH57QJXPEY8wf+o+lMEx/7o/JQRJzKFwsYu01ZZV
 kQy9Ee08P/rsNJwU2ibmZu5P3JMnhategAT8VAMBvkfLScv2sKX+1Vz19NGXzm71
 ARaT7y8MSPNb7SAvWmNZ/rVYrYIL+D3a76Gd7MOGrbVWEn6oXIbCIhY=
 =6vEK
 -----END PGP SIGNATURE-----

Merge tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI support updates from Rafael Wysocki:
 "These include an update of the CMOS RTC driver and the related ACPI
  and x86 code that, among other things, switches it over to using the
  platform device interface for device binding on x86 instead of the PNP
  device driver interface (which allows the code in question to be
  simplified quite a bit), a major update of the ACPI Time and Alarm
  Device (TAD) driver adding an RTC class device interface to it, and
  updates of core ACPI drivers that remove some unnecessary and not
  really useful code from them.

  Apart from that, two drivers are converted to using the platform
  driver interface for device binding instead of the ACPI driver one,
  which is slated for removal, support for the Performance Limited
  register is added to the ACPI CPPC library and there are some
  janitorial updates of it and the related cpufreq CPPC driver, the ACPI
  processor driver is fixed and cleaned up, and NVIDIA vendor CPER
  record handler is added to the APEI GHES code.

  Also, the interface for obtaining a CPU UID from ACPI is consolidated
  across architectures and used for fixing a problem with the PCI TPH
  Steering Tag on ARM64, there are two updates related to ACPICA, a
  minor ACPI OS Services Layer (OSL) update, and a few assorted updates
  related to ACPI tables parsing.

  Specifics:

   - Update maintainers information regarding ACPICA (Rafael Wysocki)

   - Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy()
     (Kees Cook)

   - Trigger an ordered system power off after encountering a fatal
     error operator in AML (Armin Wolf)

   - Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)

   - Remove the temporary stop-gap acpi_pptt_cache_v1_full structure
     from the ACPI PPTT parser (Ben Horgan)

   - Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
     DeSimone)

   - Address multiple assorted issues and clean up the code in the ACPI
     processor idle driver (Huisong Li)

   - Replace strlcat() in the ACPI processor idle drive with a better
     alternative (Andy Shevchenko)

   - Rearrange and clean up acpi_processor_errata_piix4() (Rafael
     Wysocki)

   - Move reference performance to capabilities and fix an uninitialized
     variable in the ACPI CPPC library (Pengjie Zhang)

   - Add support for the Performance Limited Register to the ACPI CPPC
     library (Sumit Gupta)

   - Add cppc_get_perf() API to read performance controls, extend
     cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
     library warn on missing mandatory DESIRED_PERF register (Sumit
     Gupta)

   - Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in
     target callbacks to allow it to control performance bounds via
     standard scaling_min_freq and scaling_max_freq sysfs attributes and
     add sysfs documentation for the Performance Limited Register to it
     (Sumit Gupta)

   - Add ACPI support to the platform device interface in the CMOS RTC
     driver, make the ACPI core device enumeration code create a
     platform device for the CMOS RTC, and drop CMOS RTC PNP device
     support (Rafael Wysocki)

   - Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
     driver and clean up the CMOS RTC ACPI address space handler (Rafael
     Wysocki)

   - Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
     and allow that driver to work without a dedicated IRQ if the ACPI
     alarm is used (Rafael Wysocki)

   - Clean up the ACPI TAD driver in various ways and add an RTC class
     device interface, including both the RTC setting/reading and alarm
     timer support, to it (Rafael Wysocki)

   - Clean up the ACPI AC and ACPI PAD (processor aggregator device)
     drivers (Rafael Wysocki)

   - Rework checking for duplicate video bus devices and consolidate
     pnp.bus_id workarounds handling in the ACPI video bus driver
     (Rafael Wysocki)

   - Update the ACPI core device drivers to stop setting
     acpi_device_name() unnecessarily (Rafael Wysocki)

   - Rearrange code using acpi_device_class() in the ACPI core device
     drivers and update them to stop setting acpi_device_class()
     unnecessarily (Rafael Wysocki)

   - Define ACPI_AC_CLASS in one place (Rafael Wysocki)

   - Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver
     to bind to platform devices instead of ACPI devices (Rafael
     Wysocki)

   - Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
     hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
     Feng)

   - Consolidate the interface for obtaining a CPU UID from ACPI across
     architectures and use it to address incorrect PCI TPH Steering Tag
     on ARM64 resulting from the invalid assumption that the ACPI
     Processor UID would always be the same as the corresponding logical
     CPU ID in Linux (Chengwen Feng)"

* tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits)
  ACPICA: Update maintainers information
  watchdog: ni903x_wdt: Convert to a platform driver
  ACPI: PAD: xen: Convert to a platform driver
  ACPI: processor: idle: Reset cpuidle on C-state list changes
  cpuidle: Extract and export no-lock variants of cpuidle_unregister_device()
  PCI/TPH: Pass ACPI Processor UID to Cache Locality _DSM
  ACPI: PPTT: Use acpi_get_cpu_uid() and remove get_acpi_id_for_cpu()
  perf: arm_cspmu: Switch to acpi_get_cpu_uid() from get_acpi_id_for_cpu()
  ACPI: Centralize acpi_get_cpu_uid() declaration in include/linux/acpi.h
  x86/acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
  RISC-V: ACPI: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
  LoongArch: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
  arm64: acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
  ACPI: APEI: GHES: Add NVIDIA vendor CPER record handler
  PCI: hisi: Use devm_ghes_register_vendor_record_notifier()
  ACPI: APEI: GHES: Add devm_ghes_register_vendor_record_notifier()
  ACPI: tables: Enable FPDT on LoongArch
  ACPI: processor: idle: Fix NULL pointer dereference in hotplug path
  ACPI: processor: idle: Reset power_setup_done flag on initialization failure
  ACPI: TAD: Add alarm support to the RTC class device interface
  ...
2026-04-13 19:25:07 -07:00
Linus Torvalds
4793dae01f Driver core changes for 7.1-rc1
- debugfs:
   - Fix NULL pointer dereference in debugfs_create_str()
   - Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
   - Fix soundwire debugfs NULL pointer dereference from uninitialized
     firmware_file
 
 - device property:
   - Make fwnode flags modifications thread safe; widen the field to
     unsigned long and use set_bit() / clear_bit() based accessors
   - Document how to check for the property presence
 
 - devres:
   - Separate struct devres_node from its "subclasses" (struct devres,
     struct devres_group); give struct devres_node its own release and
     free callbacks for per-type dispatch
   - Introduce struct devres_action for devres actions, avoiding the
     ARCH_DMA_MINALIGN alignment overhead of struct devres
   - Export struct devres_node and its init/add/remove/dbginfo
     primitives for use by Rust Devres<T>
   - Fix missing node debug info in devm_krealloc()
   - Use guard(spinlock_irqsave) where applicable; consolidate unlock
     paths in devres_release_group()
 
 - driver_override:
   - Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
     generic driver_override infrastructure, replacing per-bus
     driver_override strings, sysfs attributes, and match logic; fixes
     a potential UAF from unsynchronized access to driver_override in
     bus match() callbacks
   - Simplify __device_set_driver_override() logic
 
 - kernfs:
   - Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs
     file and directory removal
   - Add corresponding selftests for memcg
 
 - platform:
   - Allow attaching software nodes when creating platform devices via
     a new 'swnode' field in struct platform_device_info
   - Add kerneldoc for struct platform_device_info
 
 - software node:
   - Move software node initialization from postcore_initcall() to
     driver_init(), making it available early in the boot process
   - Move kernel_kobj initialization (ksysfs_init) earlier to support
     the above
   - Remove software_node_exit(); dead code in a built-in unit
 
 - SoC:
   - Introduce of_machine_read_compatible() and of_machine_read_model()
     OF helpers and export soc_attr_read_machine() to replace direct
     accesses to of_root from SoC drivers; also enables
     CONFIG_COMPILE_TEST coverage for these drivers
 
 - sysfs:
   - Constify attribute group array pointers to
     'const struct attribute_group *const *' in sysfs functions,
     device_add_groups() / device_remove_groups(), and struct class
 
 - Rust:
   - Devres:
     - Embed struct devres_node directly in Devres<T> instead of going
       through devm_add_action(), avoiding the extra allocation and
       the unnecessary ARCH_DMA_MINALIGN alignment
 
   - I/O:
     - Turn IoCapable from a marker trait into a functional trait
       carrying the raw I/O accessor implementation (io_read /
       io_write), providing working defaults for the per-type Io
       methods
     - Add RelaxedMmio wrapper type, making relaxed accessors usable
       in code generic over the Io trait
     - Remove overloaded per-type Io methods and per-backend macros
       from Mmio and PCI ConfigSpace
 
   - I/O (Register):
     - Add IoLoc trait and generic read/write/update methods to the Io
       trait, making I/O operations parameterizable by typed locations
     - Add register! macro for defining hardware register types with
       typed bitfield accessors backed by Bounded values; supports
       direct, relative, and array register addressing
     - Add write_reg() / try_write_reg() and LocatedRegister trait
     - Update PCI sample driver to demonstrate the register! macro
 
         Example:
 
         ```
             register! {
                 /// UART control register.
                 CTRL(u32) @ 0x18 {
                     /// Receiver enable.
                     19:19   rx_enable => bool;
                     /// Parity configuration.
                     14:13   parity ?=> Parity;
                 }
 
                 /// FIFO watermark and counter register.
                 WATER(u32) @ 0x2c {
                     /// Number of datawords in the receive FIFO.
                     26:24   rx_count;
                     /// RX interrupt threshold.
                     17:16   rx_water;
                 }
             }
 
             impl WATER {
                 fn rx_above_watermark(&self) -> bool {
                     self.rx_count() > self.rx_water()
                 }
             }
 
             fn init(bar: &pci::Bar<BAR0_SIZE>) {
                 let water = WATER::zeroed()
                     .with_const_rx_water::<1>(); // > 3 would not compile
                 bar.write_reg(water);
 
                 let ctrl = CTRL::zeroed()
                     .with_parity(Parity::Even)
                     .with_rx_enable(true);
                 bar.write_reg(ctrl);
             }
 
             fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
                 if bar.read(WATER).rx_above_watermark() {
                     // drain the FIFO
                 }
             }
 
             fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
                 bar.update(CTRL, |r| r.with_parity(parity));
             }
         ```
 
   - IRQ:
     - Move 'static bounds from where clauses to trait declarations
       for IRQ handler traits
 
   - Misc:
     - Enable the generic_arg_infer Rust feature
     - Extend Bounded with shift operations, single-bit bool conversion,
       and const get()
 
 - Misc:
   - Make deferred_probe_timeout default a Kconfig option
   - Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
     callbacks when no bus type PM ops are set
   - Add conditional guard support for device_lock()
   - Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
   - Fix kernel-doc warnings in base.h
   - Fix stale reference to memory_block_add_nid() in documentation
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCadl5SwAKCRBFlHeO1qrK
 LpjDAQCSG3vYznwrngfpmRU5bCB9sdUy/pZiX5px1357+amJkwEA9LgIVQvtHAZW
 ZXcQ7Jr+mR3mJEdlatbkWHp3w1VHqAQ=
 =y1DV
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core

Pull driver core updates from Danilo Krummrich:
 "debugfs:
   - Fix NULL pointer dereference in debugfs_create_str()
   - Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
   - Fix soundwire debugfs NULL pointer dereference from uninitialized
     firmware_file

  device property:
   - Make fwnode flags modifications thread safe; widen the field to
     unsigned long and use set_bit() / clear_bit() based accessors
   - Document how to check for the property presence

  devres:
   - Separate struct devres_node from its "subclasses" (struct devres,
     struct devres_group); give struct devres_node its own release and
     free callbacks for per-type dispatch
   - Introduce struct devres_action for devres actions, avoiding the
     ARCH_DMA_MINALIGN alignment overhead of struct devres
   - Export struct devres_node and its init/add/remove/dbginfo
     primitives for use by Rust Devres<T>
   - Fix missing node debug info in devm_krealloc()
   - Use guard(spinlock_irqsave) where applicable; consolidate unlock
     paths in devres_release_group()

  driver_override:
   - Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
     generic driver_override infrastructure, replacing per-bus
     driver_override strings, sysfs attributes, and match logic; fixes a
     potential UAF from unsynchronized access to driver_override in bus
     match() callbacks
   - Simplify __device_set_driver_override() logic

  kernfs:
   - Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs file
     and directory removal
   - Add corresponding selftests for memcg

  platform:
   - Allow attaching software nodes when creating platform devices via a
     new 'swnode' field in struct platform_device_info
   - Add kerneldoc for struct platform_device_info

  software node:
   - Move software node initialization from postcore_initcall() to
     driver_init(), making it available early in the boot process
   - Move kernel_kobj initialization (ksysfs_init) earlier to support
     the above
   - Remove software_node_exit(); dead code in a built-in unit

  SoC:
   - Introduce of_machine_read_compatible() and of_machine_read_model()
     OF helpers and export soc_attr_read_machine() to replace direct
     accesses to of_root from SoC drivers; also enables
     CONFIG_COMPILE_TEST coverage for these drivers

  sysfs:
   - Constify attribute group array pointers to
     'const struct attribute_group *const *' in sysfs functions,
     device_add_groups() / device_remove_groups(), and struct class

  Rust:
   - Devres:
      - Embed struct devres_node directly in Devres<T> instead of going
        through devm_add_action(), avoiding the extra allocation and the
        unnecessary ARCH_DMA_MINALIGN alignment

   - I/O:
      - Turn IoCapable from a marker trait into a functional trait
        carrying the raw I/O accessor implementation (io_read /
        io_write), providing working defaults for the per-type Io
        methods
      - Add RelaxedMmio wrapper type, making relaxed accessors usable in
        code generic over the Io trait
      - Remove overloaded per-type Io methods and per-backend macros
        from Mmio and PCI ConfigSpace

   - I/O (Register):
      - Add IoLoc trait and generic read/write/update methods to the Io
        trait, making I/O operations parameterizable by typed locations
      - Add register! macro for defining hardware register types with
        typed bitfield accessors backed by Bounded values; supports
        direct, relative, and array register addressing
      - Add write_reg() / try_write_reg() and LocatedRegister trait
      - Update PCI sample driver to demonstrate the register! macro

         Example:

         ```
             register! {
                 /// UART control register.
                 CTRL(u32) @ 0x18 {
                     /// Receiver enable.
                     19:19   rx_enable => bool;
                     /// Parity configuration.
                     14:13   parity ?=> Parity;
                 }

                 /// FIFO watermark and counter register.
                 WATER(u32) @ 0x2c {
                     /// Number of datawords in the receive FIFO.
                     26:24   rx_count;
                     /// RX interrupt threshold.
                     17:16   rx_water;
                 }
             }

             impl WATER {
                 fn rx_above_watermark(&self) -> bool {
                     self.rx_count() > self.rx_water()
                 }
             }

             fn init(bar: &pci::Bar<BAR0_SIZE>) {
                 let water = WATER::zeroed()
                     .with_const_rx_water::<1>(); // > 3 would not compile
                 bar.write_reg(water);

                 let ctrl = CTRL::zeroed()
                     .with_parity(Parity::Even)
                     .with_rx_enable(true);
                 bar.write_reg(ctrl);
             }

             fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
                 if bar.read(WATER).rx_above_watermark() {
                     // drain the FIFO
                 }
             }

             fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
                 bar.update(CTRL, |r| r.with_parity(parity));
             }
         ```

   - IRQ:
      - Move 'static bounds from where clauses to trait declarations for
        IRQ handler traits

   - Misc:
      - Enable the generic_arg_infer Rust feature
      - Extend Bounded with shift operations, single-bit bool
        conversion, and const get()

  Misc:
   - Make deferred_probe_timeout default a Kconfig option
   - Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
     callbacks when no bus type PM ops are set
   - Add conditional guard support for device_lock()
   - Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
   - Fix kernel-doc warnings in base.h
   - Fix stale reference to memory_block_add_nid() in documentation"

* tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (67 commits)
  bus: fsl-mc: use generic driver_override infrastructure
  s390/ap: use generic driver_override infrastructure
  s390/cio: use generic driver_override infrastructure
  vdpa: use generic driver_override infrastructure
  platform/wmi: use generic driver_override infrastructure
  PCI: use generic driver_override infrastructure
  driver core: make software nodes available earlier
  software node: remove software_node_exit()
  kernel: ksysfs: initialize kernel_kobj earlier
  MAINTAINERS: add ksysfs.c to the DRIVER CORE entry
  drivers/base/memory: fix stale reference to memory_block_add_nid()
  device property: Document how to check for the property presence
  soundwire: debugfs: initialize firmware_file to empty string
  debugfs: fix placement of EXPORT_SYMBOL_GPL for debugfs_create_str()
  debugfs: check for NULL pointer in debugfs_create_str()
  driver core: Make deferred_probe_timeout default a Kconfig option
  driver core: simplify __device_set_driver_override() clearing logic
  driver core: auxiliary bus: Drop auxiliary_dev_pm_ops
  device property: Make modifications of fwnode "flags" thread safe
  rust: devres: embed struct devres_node directly
  ...
2026-04-13 19:03:11 -07:00
Bjorn Helgaas
4224e91fea Merge branch 'pci/misc'
- Warn only once about invalid ACS kernel parameter format (Richard Cheng)

- Suppress FW_BUG warning when writing sysfs 'numa_node' with the current
  value (Li RongQing)

- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)

* pci/misc:
  PCI: Clean up dead code in Kconfig
  PCI/sysfs: Suppress FW_BUG warning when NUMA node already matches
  PCI: Use pr_warn_once() for ACS parameter parse failure
  PCI: of: Reduce severity of missing of_root error message
2026-04-13 12:50:54 -05:00
Bjorn Helgaas
b274423c79 Merge branch 'pci/controller/rzg3s-host'
- Assert (not deassert) resets in probe error path (John Madieu)

- Assert resets in suspend path in reverse order they were deasserted
  during probe (John Madieu)

- Rework inbound window algorithm to prevent mapping more than intended
  region and enforce alignment on size, to prepare for RZ/G3E support (John
  Madieu)

- Fix renesas,r9a08g045s33-pcie 'serr_cor' typo and convert properties from
  'description' to 'const' for better validation (John Madieu)

- Add RZ/G3E to DT binding and to driver (John Madieu)

* pci/controller/rzg3s-host:
  PCI: rzg3s-host: Add support for RZ/G3E PCIe controller
  PCI: rzg3s-host: Add PCIe Gen3 (8.0 GT/s) link speed support
  PCI: rzg3s-host: Explicitly set class code for RZ/G3E compatibility
  PCI: rzg3s-host: Add SoC-specific configuration and initialization callbacks
  PCI: rzg3s-host: Make configuration reset lines optional
  PCI: rzg3s-host: Make SYSC register offsets SoC-specific
  dt-bindings: PCI: renesas,r9a08g045s33-pcie: Document RZ/G3E SoC
  dt-bindings: PCI: renesas,r9a08g045s33-pcie: Fix naming properties
  PCI: rzg3s-host: Rework inbound window algorithm for supporting RZ/G3E SoC
  PCI: rzg3s-host: Reorder reset assertion during suspend
  PCI: rzg3s-host: Fix reset handling in probe error path

# Conflicts:
#	drivers/pci/controller/pcie-rzg3s-host.c
2026-04-13 12:50:53 -05:00
Bjorn Helgaas
d096bd7d8b Merge branch 'pci/controller/mediatek-gen3'
- Use dev_err_probe() to simplify error paths and make deferred probe
  messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu Tsai)

- Initialize IRQ domains earlier to remove need for cleanup if it fails
  (Chen-Yu Tsai)

- Set up controller windows and MSI before bringing the link up to separate
  controller init and things related to downstream devices (Chen-Yu Tsai)

- Split out device power up and down helpers (Chen-Yu Tsai)

- Power off device if setup fails (Chen-Yu Tsai)

- Integrate new pwrctrl API to enable power control for WiFi/BT adapters on
  mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)

- Prevent leaking IRQ domains when IRQ not found (Chen-Yu Tsai)

* pci/controller/mediatek-gen3:
  PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found
  PCI: mediatek-gen3: Integrate new pwrctrl API
  PCI: mediatek-gen3: Disable device if further setup fails
  PCI: mediatek-gen3: Split out device power helpers
  PCI: mediatek-gen3: Add error path for resume driver callbacks
  PCI: mediatek-gen3: Move controller setup steps before PERST# control
  PCI: mediatek-gen3: Move mtk_pcie_setup_irq() out of mtk_pcie_setup()
  PCI: mediatek-gen3: Clean up mtk_pcie_parse_port() with dev_err_probe()
2026-04-13 12:50:48 -05:00
Bjorn Helgaas
8a1c7effae Merge branch 'pci/controller/mediatek'
- Increase snprintf() buffer size to avoid truncation warnings (Ryder Lee)

* pci/controller/mediatek:
  PCI: mediatek: Fix possible truncation in mtk_pcie_parse_port()
2026-04-13 12:50:48 -05:00
Bjorn Helgaas
b43cdb32ee Merge branch 'pci/controller/dwc-tegra194'
- Poll less aggressively and non-atomically for PME_TO_Ack during
  transition to L2 (Vidya Sagar)

- Increase LTSSM poll time on surprise link down (Manikanta Maddireddy)

- Disable LTSSM after transition to Detect on surprise link down to stop
  toggling between Polling and Detect (Manikanta Maddireddy)

- Don't force the device into the D0 state before L2 when suspending or
  shutting down the controller (Vidya Sagar)

- Disable PERST# IRQ only in Endpoint mode because it's not registered in
  Root Port mode (Manikanta Maddireddy)

- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)

- Disable direct speed change in Endpoint mode so link speed change is
  controlled by the host (Vidya Sagar)

- Set LTR values before link up to avoid bogus LTR messages with 0 latency
  (Vidya Sagar)

- Allow system suspend when the Endpoint link is down (Vidya Sagar)

- During remove, free resources allocated during Endpoint .probe() (Vidya
  Sagar)

- Use DWC IP core version, not Tegra custom values, to avoid DWC core
  version check warnings (Manikanta Maddireddy)

- Apply ECRC workaround to devices based on DesignWare 5.00a as well
  as 4.90a (Manikanta Maddireddy)

- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234 erratum
  (Vidya Sagar)

- Delay post-PERST# cleanup until core is powered on to avoid CBB timeout
  (Manikanta Maddireddy)

- Assert CLKREQ# so switches that forward it to their downstream side can
  bring up those links successfully (Vidya Sagar)

- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state from
  any previous bad link state (Vidya Sagar)

- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so DMA
  driver and Endpoint controller driver can share the interrupt line (Vidya
  Sagar)

- Enable DMA interrupt to support DMA in both Root Port and Endpoint modes
  (Vidya Sagar)

- Enable hardware link retraining after link goes down in Endpoint mode
  (Vidya Sagar)

- Add DT binding and driver support for core clock monitoring (Vidya Sagar)

* pci/controller/dwc-tegra194:
  PCI: tegra194: Add core monitor clock support
  dt-bindings: PCI: tegra194: Add monitor clock support
  PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
  PCI: tegra194: Enable DMA interrupt
  PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
  PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
  PCI: tegra194: Assert CLKREQ# explicitly by default
  PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
  PCI: tegra194: Disable L1.2 capability of Tegra234 EP
  PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
  PCI: tegra194: Use DWC IP core version
  PCI: tegra194: Free up Endpoint resources during remove()
  PCI: tegra194: Allow system suspend when the Endpoint link is not up
  PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
  PCI: tegra194: Disable direct speed change for Endpoint mode
  PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
  PCI: tegra194: Disable PERST# IRQ only in Endpoint mode
  PCI: tegra194: Don't force the device into the D0 state before L2
  PCI: tegra194: Disable LTSSM after transition to Detect on surprise link down
  PCI: tegra194: Increase LTSSM poll time on surprise link down
  PCI: tegra194: Fix polling delay for L2 state
2026-04-13 12:50:47 -05:00
Bjorn Helgaas
bc55afb8fa Merge branch 'pci/controller/dwc-rockchip'
- Add tracepoints for PCIe controller LTSSM transitions and link rate
  changes (Shawn Lin)

- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn Lin)

* pci/controller/dwc-rockchip:
  PCI: dw-rockchip: Add pcie_ltssm_state_transition tracepoint support
  Documentation: tracing: Add PCI controller event documentation
  PCI: trace: Add PCI controller tracepoint feature
2026-04-13 12:50:47 -05:00
Bjorn Helgaas
1e6df556f1 Merge branch 'pci/controller/dwc-rcar-gen4-ep'
- Mark BAR0 and BAR2 as Resizable (Koichiro Den)

- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)

* pci/controller/dwc-rcar-gen4-ep:
  PCI: dwc: rcar-gen4: Change EPC BAR alignment to 4K as per the documentation
  PCI: dwc: rcar-gen4: Mark BAR0 and BAR2 as Resizable BARs in endpoint mode

# Conflicts:
#	drivers/pci/controller/dwc/pcie-rcar-gen4.c
2026-04-13 12:50:46 -05:00
Bjorn Helgaas
07f7d0f0ee Merge branch 'pci/controller/dwc-qcom'
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support' since
  Qcom Root Ports support hotplug events like DL_Up/Down and can accept
  writes to Slot Control without delays between writes (Krishna Chaitanya
  Chundru)

* pci/controller/dwc-qcom:
  PCI: qcom: Advertise Hotplug Slot Capability with no Command Completion support
2026-04-13 12:50:23 -05:00
Bjorn Helgaas
b94fd08746 Merge branch 'pci/controller/dwc-layerscape'
- Allow Layerscape host controller driver to be build as a removable module
  (Sascha Hauer)

* pci/controller/dwc-layerscape:
  PCI: layerscape: Allow to compile as module
2026-04-13 12:50:23 -05:00
Bjorn Helgaas
d33fae1754 Merge branch 'pci/controller/dwc-imx6'
- Fix device node reference leak in imx_pcie_probe() (Felix Gu)

- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
  suspending i.MX6SX because LTSSM registers are inaccessible (Richard Zhu)

- Separate PERST# assertion (for resetting endpoints) from core reset (for
  resetting the RC itself) to prepare for new DTs with PERST# GPIO in
  per-Root Port nodes (Sherry Sun)

- Retain the Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
  MSI from downstream devices will work (Richard Zhu)

- Fix the i.MX95 reference clock source selection when internal refclk is
  used (Franz Schnyder)

* pci/controller/dwc-imx6:
  PCI: imx6: Fix reference clock source selection for i.MX95
  PCI: imx6: Keep Root Port MSI capability with iMSI-RX to work around hardware bug
  PCI: imx6: Separate PERST# assertion from core reset functions
  PCI: imx6: Change imx_pcie_deassert_core_reset() return type to void
  PCI: imx6: Skip waiting for L2/L3 Ready on i.MX6SX
  PCI: imx6: Fix device node reference leak in imx_pcie_probe()
2026-04-13 12:50:23 -05:00
Bjorn Helgaas
927e9d9d4e Merge branch 'pci/controller/dwc-eswin'
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan Zhang)

* pci/controller/dwc-eswin:
  PCI: eswin: Add ESWIN PCIe Root Complex driver
  dt-bindings: PCI: eswin: Add ESWIN PCIe Root Complex

# Conflicts:
#	drivers/pci/controller/dwc/Kconfig
#	drivers/pci/controller/dwc/Makefile
2026-04-13 12:50:22 -05:00
Bjorn Helgaas
d52e027626 Merge branch 'pci/controller/dwc-andes-qilai'
- Add Andes QiLai SoC PCIe host driver support (Randolph Lin)

* pci/controller/dwc-andes-qilai:
  PCI: qilai: Add Andes QiLai SoC PCIe host driver support
  dt-bindings: PCI: Add Andes QiLai PCIe support

# Conflicts:
#	drivers/pci/controller/dwc/Makefile
2026-04-13 12:50:15 -05:00
Bjorn Helgaas
9cba2840be Merge branch 'pci/controller/dwc-amd-mdb'
- Correct the IRQ number logged in INTx error message (Rakuram Eswaran)

* pci/controller/dwc-amd-mdb:
  PCI: amd-mdb: Correct IRQ number in INTx error message
2026-04-13 12:50:09 -05:00
Bjorn Helgaas
764fd83386 Merge branch 'pci/controller/dwc'
- Continue with system suspend even if an Endpoint doesn't respond with
  PME_TO_Ack message (Manivannan Sadhasivam)

- Remove the Baikal-T1 controller driver since it never quite became usable
  (Andy Shevchenko)

- Set Endpoint MSI-X Table Size in the correct function of a multi-function
  device when configuring MSI-X, not in Function 0 (Aksh Garg)

- Set Max Link Width and Max Link Speed for all functions of a
  multi-function device, not just Function 0 (Aksh Garg)

- Clean up in the dw_pcie_resume_noirq() error path (Manivannan Sadhasivam)

- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)

- Fix type mismatch for kstrtou32_from_user() in debugfs write functions
  (Hans Zhang)

* pci/controller/dwc:
  PCI: dwc: Fix type mismatch for kstrtou32_from_user() return value
  PCI: dwc: Expose PCIe event counters for groups 5 to 7 over debugfs
  PCI: dwc: Perform cleanup in the error path of dw_pcie_resume_noirq()
  PCI: dwc: ep: Mirror the max link width and speed fields to all functions
  PCI: dwc: ep: Fix MSI-X Table Size configuration in dw_pcie_ep_set_msix()
  PCI: dwc: Remove not-going-to-be-supported code for Baikal SoC
  PCI: dwc: Proceed with system suspend even if the endpoint doesn't respond with PME_TO_Ack message
2026-04-13 12:50:09 -05:00
Bjorn Helgaas
7dde59ebda Merge branch 'pci/controller/cadence-sky1'
- Release ECAM config on probe failure (Felix Gu)

* pci/controller/cadence-sky1:
  PCI: sky1: Use boolean true for is_rc field
  PCI: sky1: Fix missing cleanup of ECAM config on probe failure
2026-04-13 12:50:09 -05:00
Bjorn Helgaas
9120557a9d Merge branch 'pci/controller/cadence-sg2042'
- Add cadence core flags to disable advertising broken ASPM support (Yao
  Zi)

- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that advertise
  support for them (Yao Zi)

* pci/controller/cadence-sg2042:
  PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
  PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
2026-04-13 12:50:08 -05:00
Bjorn Helgaas
cadf80e001 Merge branch 'pci/controller/cadence'
- Implement byte/word config reads with dword (32-bit) reads because some
  Cadence controllers don't support sub-dword accesses (Aksh Garg)

* pci/controller/cadence:
  PCI: cadence: Use cdns_pcie_read_sz() for byte or word read access
2026-04-13 12:50:08 -05:00
Bjorn Helgaas
bf6dd22407 Merge branch 'pci/controller/aspeed'
- Fix IRQ domain leak on platform_get_irq() failure (Felix Gu)

* pci/controller/aspeed:
  PCI: aspeed: Fix IRQ domain leak on platform_get_irq() failure
2026-04-13 12:50:08 -05:00
Bjorn Helgaas
736b677ff4 Merge branch 'pci/controller/max-link-speed'
- Add pcie_get_link_speed() to encapsulate and bounds-check
  pcie_link_speed[] accesses (Hans Zhang)

- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3, rzg3s
  (where the actual controller constraints are known), and remove it from
  the generic OF DT accessor (Hans Zhang)

* pci/controller/max-link-speed:
  PCI: of: Remove max-link-speed generation validation
  PCI: controller: Validate max-link-speed
  PCI: j721e: Validate max-link-speed from DT
  PCI: dwc: Use pcie_get_link_speed() helper for safe array access
  PCI: Add pcie_get_link_speed() helper for safe array access
2026-04-13 12:50:07 -05:00
Bjorn Helgaas
8153aaf6b9 Merge branch 'pci/endpoint'
- Free all previously requested IRQs in epf_ntb_db_bar_init_msi_doorbell()
  error path (Koichiro Den)

- Free doorbell IRQ in pci-epf-test only if it has actually been requested
  (Koichiro Den)

- Discard pointer to doorbell message array after freeing it in
  pci_epf_alloc_doorbell() error path (Koichiro Den)

- Advertise dynamic inbound mapping support in pci-epf-test and update host
  pci_endpoint_test to skip doorbell testing if not advertised by endpoint
  (Koichiro Den)

- Constify configfs item and group operations (Christophe JAILLET)

- Use array_index_nospec() on configfs MW show/store attributes (Koichiro
  Den)

- Return -ERANGE (not -EINVAL) for configfs out-of-range MW index (Koichiro
  Den)

- Return 0, not remaining timeout, when MHI eDMA ops complete so
  mhi_ep_ring_add_element() doesn't interpret non-zero as failure (Daniel
  Hodges)

- Remove vntb and ntb duplicate resource teardown that leads to oops when
  .allow_link() fails or .drop_link() is called (Koichiro Den)

- Disable vntb delayed work before clearing BAR mappings and doorbells to
  avoid oops caused by doing the work after resources have been torn down
  (Koichiro Den)

- Fix pci_epf_add_vepf() kernel-doc typo (Alok Tiwari)

- Propagate pci_epf_create() errors to pci_epf_make() callers (Alok Tiwari)

- Remove redundant BAR_RESERVED annotation for the high order part of a
  64-bit BAR (Niklas Cassel)

- Add a way to describe reserved subregions within BARs, e.g.,
  platform-owned fixed register windows, and use it for the RK3588 BAR4 DMA
  ctrl window (Koichiro Den)

- Add BAR_DISABLED for BARs that will never be available to an EPF driver,
  and change some BAR_RESERVED annotations to BAR_DISABLED (Niklas Cassel)

- Disable BARs in common code instead of in each glue driver (Niklas
  Cassel)

- Advertise reserved BARs in Capabilities so host-side drivers can skip
  them (Niklas Cassel)

- Skip reserved BARs in selftests (Niklas Cassel)

- Improve error messages and include device name when available (Manivannan
  Sadhasivam)

- Add NTB .get_dma_dev() callback for cases where DMA API requires a
  different device, e.g., vNTB devices (Koichiro Den)

- Return -EINVAL, not -ENOSPC, if endpoint test determines the subrange
  size is too small (Koichiro Den)

- Add reserved region types for MSI-X Table and PBA so Endpoint controllers
  can them as describe hardware-owned regions in a BAR_RESERVED BAR
  (Manikanta Maddireddy)

- Make Tegra194/234 BAR0 programmable and remove 1MB size limit (Manikanta
  Maddireddy)

- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
  (Manikanta Maddireddy)

- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
  (Manikanta Maddireddy)

- Skip the BAR subrange selftest if there are not enough inbound window
  resources to run the test (Christian Bruel)

* pci/endpoint:
  selftests: pci_endpoint: Skip BAR subrange test on -ENOSPC
  misc: pci_endpoint_test: Add Tegra194 and Tegra234 device table entries
  PCI: tegra194: Expose BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
  PCI: tegra194: Make BAR0 programmable and remove 1MB size limit
  PCI: endpoint: Add reserved region type for MSI-X Table and PBA
  misc: pci_endpoint_test: Use -EINVAL for small subrange size
  PCI: endpoint: pci-epf-vntb: Implement .get_dma_dev()
  NTB: ntb_transport: Use ntb_get_dma_dev() for DMA buffers
  NTB: core: Add .get_dma_dev() callback to ntb_dev_ops
  PCI: endpoint: Improve error messages
  PCI: endpoint: Print the EPF name in the error log of pci_epf_make()
  selftests: pci_endpoint: Skip reserved BARs
  misc: pci_endpoint_test: Give reserved BARs a distinct error code
  PCI: endpoint: pci-epf-test: Advertise reserved BARs
  PCI: dwc: Disable BARs in common code instead of in each glue driver
  PCI: dwc: Replace certain BAR_RESERVED with BAR_DISABLED in glue drivers
  PCI: endpoint: Introduce pci_epc_bar_type BAR_DISABLED
  PCI: dw-rockchip: Describe RK3588 BAR4 DMA ctrl window
  PCI: endpoint: Describe reserved subregions within BARs
  PCI: endpoint: Allow only_64bit on BAR_RESERVED
  PCI: endpoint: Do not mark the BAR succeeding a 64-bit BAR as BAR_RESERVED
  PCI: endpoint: Propagate error from pci_epf_create()
  PCI: endpoint: Fix typo in pci_epf_add_vepf() kernel-doc
  PCI: endpoint: pci-epf-vntb: Stop cmd_handler work in epf_ntb_epc_cleanup
  PCI: endpoint: pci-epf-ntb: Remove duplicate resource teardown
  PCI: endpoint: pci-epf-vntb: Remove duplicate resource teardown
  PCI: epf-mhi: Return 0, not remaining timeout, when eDMA ops complete
  PCI: endpoint: pci-epf-vntb: Return -ERANGE for out-of-range MW index
  PCI: endpoint: pci-epf-vntb: Use array_index_nospec() on mws_size[] access
  PCI: endpoint: Constify struct configfs_item_operations and configfs_group_operations
  selftests: pci_endpoint: Skip doorbell test when unsupported
  misc: pci_endpoint_test: Gate doorbell test on dynamic inbound mapping
  PCI: endpoint: pci-epf-test: Advertise dynamic inbound mapping support
  PCI: endpoint: pci-ep-msi: Fix error unwind and prevent double alloc
  PCI: endpoint: pci-epf-test: Don't free doorbell IRQ unless requested
  PCI: endpoint: pci-epf-vntb: Fix MSI doorbell IRQ unwind
2026-04-13 12:50:07 -05:00
Bjorn Helgaas
981b3fefcc Merge branch 'pci/virtualization'
- Avoid FLR for AMD NPU device, where it causes the device to hang (Lizhi
  Hou)

* pci/virtualization:
  PCI: Avoid FLR for AMD NPU device
2026-04-13 12:50:06 -05:00
Bjorn Helgaas
a09007a782 Merge branch 'pci/vga'
- Return vga_get_uninterruptible() back to userspace in the
  /dev/vga_arbiter path so user can tell whether VGA routing was updated
  (Simon Richter)

- Make pci_set_vga_state() fail if bridge doesn't support VGA routing,
  i.e., PCI_BRIDGE_CTL_VGA is not writable, and return errors up to
  vga_get() callers (Simon Richter)

* pci/vga:
  PCI/VGA: Fail pci_set_vga_state() if VGA decoding not supported
  PCI/VGA: Pass errors from pci_set_vga_state() up
  PCI/VGA: Pass vga_get_uninterruptible() errors to userspace
2026-04-13 12:50:06 -05:00
Bjorn Helgaas
6cf4941ba9 Merge branch 'pci/resource'
- Prevent assigning space to unimplemented bridge windows; previously we
  mistakenly assumed prefetchable window existed and assigned space and put
  a BAR there (Ahmed Naseef)

- Avoid shrinking bridge windows to fit in the initial Root Port window;
  this fixes one problem with devices with large BARs connected via
  switches, e.g., Thunderbolt (Ilpo Järvinen)

- Retain information about optional resources to make assignment during
  rescan more likely to succeed (Ilpo Järvinen)

- Add __resource_contains_unbound() for use in finding space for resources
  with no address assigned (Ilpo Järvinen)

- Pass full extent of empty space, not just the aligned space, to
  resource_alignf callback so free space before the requested alignment can
  be used (Ilpo Järvinen)

- Remove unnecessary second alignment from ARM, m68k, MIPS (Ilpo Järvinen)

- Place small resources before larger ones for better utilization of
  address space (Ilpo Järvinen)

- Fix alignment calculation for resource size larger than align, e.g.,
  bridge windows larger than the 1MB required alignment (Ilpo Järvinen)

* pci/resource:
  PCI: Fix alignment calculation for resource size larger than align
  PCI: Align head space better
  PCI: Rename window_alignment() to pci_min_window_alignment()
  parisc/PCI: Clean up align handling
  MIPS: PCI: Remove unnecessary second application of align
  m68k/PCI: Remove unnecessary second application of align
  ARM/PCI: Remove unnecessary second application of align
  resource: Rename 'tmp' variable to 'full_avail'
  resource: Pass full extent of empty space to resource_alignf callback
  resource: Add __resource_contains_unbound() for internal contains checks
  PCI: Fix premature removal from realloc_head list during resource assignment
  PCI: Prevent shrinking bridge window from its required size
  PCI: Prevent assignment to unsupported bridge windows
2026-04-13 12:50:05 -05:00
Bjorn Helgaas
12b56ec723 Merge branch 'pci/reset'
- Update slot handling so all ARI functions are treated as being in the
  same slot.  They're all reset by Secondary Bus Reset, but previously
  drivers of ARI functions that appeared to be on a non-zero device weren't
  notified and fatal hardware errors could result (Keith Busch)

- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
  events (Keith Busch)

- Consolidate bus iteration across the _lock(), _unlock(), and _trylock()
  functions for pci_bus and pci_slot (Ilpo Järvinen)

- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked by
  CXL because it has no effect (Vidya Sagar)

* pci/reset:
  PCI/CXL: Hide SBR from reset_methods if masked by CXL
  PCI: Consolidate pci_bus/slot_lock/unlock/trylock()
  PCI: Make reset_subordinate hotplug safe
  PCI: Allow all bus devices to use the same slot
  PCI: Rename __pci_bus_reset() and __pci_slot_reset()
2026-04-13 12:50:05 -05:00
Bjorn Helgaas
85d9948d59 Merge branch 'pci/pwrctrl'
- Rename 'slot' driver to 'generic' since it can handle any device with
  individual power control as well as slots (Neil Armstrong)

- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
  generic pwrctrl driver can control it (Neil Armstrong)

* pci/pwrctrl:
  PCI/pwrctrl: generic: Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller support
  PCI/pwrctrl: generic: Simplify dev_err_probe() usage
  PCI/pwrctrl: generic: Rename pci-pwrctrl-slot as generic
2026-04-13 12:50:04 -05:00
Bjorn Helgaas
7d7c6ebd46 Merge branch 'pci/ptm'
- Leave Precision Time Measurement disabled until a driver enables it to
  avoid PCIe errors (Mika Westerberg)

* pci/ptm:
  PCI/PTM: Do not enable PTM automatically for Root and Switch Upstream Ports
  PCI/PTM: Drop pci_enable_ptm() granularity parameter
2026-04-13 12:50:04 -05:00
Bjorn Helgaas
a735a513ff Merge branch 'pci/p2pdma'
- Allow wildcards in list of host bridges that support peer-to-peer DMA
  between hierarchy domains and add all Google SoCs (Jacob Moroni)

* pci/p2pdma:
  PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
  PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
2026-04-13 12:50:03 -05:00
Bjorn Helgaas
3ebccb123d Merge branch 'pci/msi'
- Update documentation of pci_free_irq_vectors() and pcim_enable_device()
  (Shawn Lin)

* pci/msi:
  PCI/MSI: Add TODO comment about legacy pcim_enable_device() side-effect
  PCI/MSI: Clarify pci_free_irq_vectors() usage for managed devices
2026-04-13 12:50:03 -05:00
Bjorn Helgaas
c9aad55980 Merge branch 'pci/hotplug'
- Use for_each_child_of_node_scoped() to simplify iteration over OF
  children (Krzysztof Kozlowski)

- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core doesn't
  complain when setting brightness fails because the endpoint is gone
  (Richard Cheng)

* pci/hotplug:
  PCI/NPEM: Set LED_HW_PLUGGABLE for hotplug-capable ports
  PCI: rpaphp: Simplify with scoped for each OF child loop
  PCI: pnv_php: Simplify with scoped for each OF child loop
2026-04-13 12:50:03 -05:00