Add GPU powerdomain, opp-table, and cooling map nodes for the Mali
GPU on the RK3328 SoC. Opp-table frequencies are sourced from the
Rockchip Linux v4.4 vendor kernel while voltages have been derived
from practical use and support work: keeping voltage above 1075mV
and disabling the 500MHz opp-point avoids instability and crashes.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64
Link: https://lore.kernel.org/r/20250906120810.1833016-1-christianshewitt@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK3576 EVB1 has a RTL8211F PHY for each GMAC interface with
a dedicated reset line and the 25MHz clock provided by the SoC.
The current description results in non-working Ethernet as the
clocks are only enabled by the PHY driver, but probing the right
PHY driver currently requires that the PHY ID register can be read
for automatic identification.
This fixes up the network description to get the network functionality
working reliably and cleans up usage of deprecated DT properties while
at it.
Fixes: f135a1a073 ("arm64: dts: rockchip: Add rk3576 evb1 board")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250910-rk3576-evb-network-v1-1-68ed4df272a2@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The HDMI0(Port next to Headphone Jack) is driven by DP1 on rk3588
via RA620(a dp2hdmi converter).
Add related dt nodes to enable it.
Note: ROCKCHIP_VOP2_EP_DP1 is defined as 11 in dt-binding header,
but it will trigger a dtc warning like "graph node unit address
error, expected "b"" if we use it directly after endpoint, so we
use "b" instead here.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250822063959.692098-11-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the Mini DisplayPort on this board.
Note that ROCKCHIP_VOP2_EP_DP0 is defined as 10 in dt-binding header,
but it will trigger a dtc warning like "graph node unit address error,
expected "a"" if we use it directly after endpoint, so we use "a"
instead here.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250822063959.692098-10-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The DP1 is compliant with the DisplayPort Specification
Version 1.4, and share the USBDP combo PHY1 with USB 3.1
HOST1 controller.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250822063959.692098-9-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The DP0 is compliant with the DisplayPort Specification
Version 1.4, and share the USBDP combo PHY0 with USB 3.1
HOST0 controller.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250822063959.692098-8-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The NanoPi Zero2 is a small single board computer developed by
FriendlyElec, based on the Rockchip RK3528A SoC.
Add initial device tree for the FriendlyElec NanoPi Zero2 board.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250717103720.2853031-7-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Sige1 is a single board computer developed by ArmSoM, based on the
Rockchip RK3528A SoC.
Add initial device tree for the ArmSoM Sige1 board.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250717103720.2853031-5-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The ROCK 2A and ROCK 2F is a high-performance single board computer
developed by Radxa, based on the Rockchip RK3528A SoC.
Add initial device tree for the Radxa ROCK 2A and ROCK 2F boards.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250717103720.2853031-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the required nodes to enable SPDIF audio output on
the Beelink A1 set-top-box.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20250828164300.3829488-1-christianshewitt@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the ir-receiver and ir pinctrl nodes to enable the IR receiver
on the ROC-RK3328-CC board.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20250829054547.4053558-1-christianshewitt@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Update the wake-up pin and associated interupt details for the
Pinephone Pro WiFi module. Details obtained from the published
PinephonePro-Schematic-V1.0-20211127.pdf page 19.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20250829113826.2029755-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The NPU on the Orange Pi 5/5B uses the same regulator for both the
sram-supply and the npu's supply. Enable all the NPU bits. Also add
the regulator as a domain-supply to the pd_npu power domain.
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250812025755.2078-2-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add device tree nodes to enable Bluetooth in the Ampak AP6275P module
found on Rockchip RK3576 EVB1 and connected over a UART link.
Note that this doesn't enable the out-of-band PCM connection. It's
routed to SAI2 M0 pins in case anyone wishes to add it.
Tested-by: Pavel Zhovner <pavel@flipperdevices.com>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250813-evb1-rtcwifibt-v1-3-d13c83422971@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add device tree nodes to enable the onboard Ampak AP6275P WiFi chip
connected over a PCIe link on Rockchip RK3576 EVB1.
It takes an external 32 kHz clock from the RTC chip and requires the
WIFI_REG_ON signal to be enabled before the bus is enumerated to
initialize properly.
Tested-by: Pavel Zhovner <pavel@flipperdevices.com>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250813-evb1-rtcwifibt-v1-2-d13c83422971@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the I2C connected RTC chip to the Rockchip RK3576 EVB1 board.
Apart from the realtime clock functionality, it also provides a 32 kHz
clock source for the onboard WiFi chip.
Tested-by: Pavel Zhovner <pavel@flipperdevices.com>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250813-evb1-rtcwifibt-v1-1-d13c83422971@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The HINLINK H66K is a development board with the
Rockchip RK3568 SoC. It has the following features:
- 2/4GB LPDDR4
- 1x HDMI Type A
- 3.5mm jack with mic
- 1x PCIE 2.0 WiFi slot
- 1x USB 3.0, 2x USB 2.0
- 2x 2.5GbE RTL8125B Ethernet
- MicroSD card slot / eMMC 32GB
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250818100009.170202-5-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The HINLINK H68K is a development board with the
Rockchip RK3568 SoC. It has the following features:
- 2/4GB LPDDR4
- 1x HDMI Type A
- 3.5mm jack with mic
- 1x PCIE 2.0 WiFi slot
- 1x USB 3.0, 2x USB 2.0
- 2x 1GbE RTL8211F Ethernet
- 2x 2.5GbE RTL8125B Ethernet
- MicroSD card slot / eMMC 32GB
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250818100009.170202-4-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK3576 watchdog does not need any board specific resources, so
let's enable it by default just like we do for RK3588.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250818-rk3576-watchdog-v1-1-28f82e01029c@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add hardware description for the USB-C port in the Radxa ROCK 5 Model B
family. This describes the OHCI, EHCI and XHCI USB parts. The DisplayPort
AltMode is only partially described, as bindings for the necessary
DisplayPort controller are still being reviewed.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250819-rock5bp-for-upstream-v4-1-7a2365ce7176@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK 5A board includes a green power LED that is defined in
the vendor device tree but is missing from the upstream kernel DTS file.
This causes the LED to be uncontrollable from the operating system, as no
entry is created for it under /sys/class/leds.
This patch adds the missing node to the leds block, creating a
"green:power" device and allowing the LED to be controlled by the kernel.
Signed-off-by: Kyle Petryszak <kylepzak@projectinitiative.io>
Link: https://lore.kernel.org/r/175565703702.6.15498212790604388615.862782045@projectinitiative.io
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Describe device power-domains and enable the PD_RKVENC, PD_VO and PD_VPU
power-domains on RK3528.
The PD_RKVDEC is used by RKVDEC and DDRPHY CRU, and is kept disabled to
prevent a full system reset trying to read the rate of the SCMI_CLK_DDR
clock.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250821211843.3051349-2-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable support for the HDMI input port found on the orangepi 5 plus.
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Reviewed-by: Ondřej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20250823-orangepi5-v1-2-ae77dd0e06d7@hotmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This fixed regulator is described by the schematics as being part of the
baseboard and its output supply is then routed to the 30pin DSI connector
on the board.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250707164906.1445288-13-heiko@sntech.de
Rockchip RK3528 ships a naneng-combphy that is shared by PCIe and USB
3.0 controllers. Describe it and the pipe-phy grf which it depends on.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250728102947.38984-8-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Now that the binding head has been merged, convert the power-domain ids
back to these constants for easier handling.
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250620201715.1572609-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The NPU on the ROCK5B uses the same regulator for both the sram-supply
and the npu's supply. Add this regulator, and enable all the NPU bits.
Also add the regulator as a domain-supply to the pd_npu power domain.
v8:
- Remove notion of top core (Robin Murphy)
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-10-77ebd484941e@tomeuvizoso.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
See Chapter 36 "RKNN" from the RK3588 TRM (Part 1).
The IP is divided in three cores, programmed independently. The first
core though is special, being able to delegate work to the other cores.
The IOMMU of the first core is also special in that it has two subunits
(read/write?) that need to be programmed in sync.
v2:
- Have one device for each NPU core (Sebastian Reichel)
- Have one device for each IOMMU (Sebastian Reichel)
- Correctly sort nodes (Diederik de Haas)
- Add rockchip,iommu compatible to IOMMU nodes (Sebastian Reichel)
v3:
- Adapt to a split of the register block in the DT bindings (Nicolas
Frattaroli)
v4:
- Adapt to changes in bindings
v6:
- pclk and npu clocks are needed by all clocks (Rob Herring)
v8:
- Remove notion of top core (Robin Murphy)
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-8-77ebd484941e@tomeuvizoso.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The NPU of the RK3588 has an external supply. This supply also affects
the power domain of the NPU, not just the NPU device nodes themselves.
Since correctly modelled boards will want the power domain to be aware
of the regulator so that it doesn't always have to be on, add a label to
the NPU power domain node so board files can reference it.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-7-77ebd484941e@tomeuvizoso.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Thanks to Heiko's work getting OTP working on the RK3576, we can specify
the thermal sensor trim values which are stored there now, and with my
driver addition to rockchip_thermal, we can make use of these.
Add them to the devicetree for the SoC.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250610-rk3576-tsadc-upstream-v6-7-b6e9efbf1015@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the TSADC node to the RK3576. Additionally, add everything the TSADC
needs to function, i.e. thermal zones, their trip points and maps, as
well as adjust the CPU cooling-cells property.
The polling-delay properties are set to 0 as we do have interrupts for
this TSADC on this particular SoC, though the polling-delay-passive
properties are set to 100 for the thermal zones that have a passive
cooling device, as otherwise the thermal throttling behaviour never
unthrottles.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250610-rk3576-tsadc-upstream-v6-6-b6e9efbf1015@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The NICs have default-trigger of "netdev" in order to show up as
LAN/WAN connected, so their default-state should be set to "off".
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250810100020.445053-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmiXjqoACgkQEsHwGGHe
VUrD0Q/9FPOeQ6sNazmk4oC0d7BrgTmjiSR9yHsgbHzLRilx7ncBNLS1DAwVBKNS
JPpHUEWdIjY7cURYFxihSPvjG1d+yCoKHkn/HlGXpVNm2bfN8M5ejlqd/yskGwa1
9eNzPCB08+dD0zJhEq6teDn5cAGqeLmdiQa+h3UZ6Wt5BOGv2NAMpF8cgObGC6le
2ednA+lHPlQdIIJCH+HmmHIvVHXAGiuisfdD6eVtec28LU+V/vNPkGnmss616dui
48O2+FPaBnN+0tlNmn/bdisjAUWpYPYA9sto2tk/wKXZM+OW5rIlB/NhzDvvjd1c
1kHX05bzH9aKIQQ4d+UUTnnlqY/biG80UWg1BPgJzW/ko6rtdVP8kZ5xQXQsEJ15
gihYMdcyb3TwDxXkEqWVH0INmAmIC0daCvrDgiXcyOlPPoBdh9IYE0YxMAY+GSF0
RN55ZSMc0l2p6qL70WeWau5JJCplNjT6YyfOX8PeTRpkpoZIUlNVZyJcItaJMVbf
cbi1SE9TRzoHgenDOBZZVQX54X1FlZg6WupHEoN8amIBEh6rw3E6biKmQDcXLa8n
9tex9t7OgyFcn8iLFrUVxzssQi+2+kt6tvTeJds4qG4U4dvWm8o1z4Lja3WkQCp2
6It8J2PS1KJYVfffJz0SXFex9SKImsgBCSLn/U6qNJF9mAUG9/4=
=pdid
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix an interrupt vector setup race which leads to a non-functioning
device
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
* tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Plug vector setup race
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion
-----BEGIN PGP SIGNATURE-----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=MulZ
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
These are a few patches to fix up bits that went missing during the
merge window: The tegra and s3c patches address trivial regressions
from conflicts, the bcm7445 makes the dt conform to the binding that
was made stricter.
-----BEGIN PGP SIGNATURE-----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=fzZb
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are a few patches to fix up bits that went missing during the
merge window: The tegra and s3c patches address trivial regressions
from conflicts, the bcm7445 makes the dt conform to the binding that
was made stricter"
* tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: tegra: Remove numa-node-id properties
ARM: s3c/gpio: complete the conversion to new GPIO value setters
ARM: dts: broadcom: Fix bcm7445 memory controller compatible
- replace __ASSEMBLY__ with __ASSEMBLER__ in arch headers
-----BEGIN PGP SIGNATURE-----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=Jj6J
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20250808' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa update from Max Filippov:
- replace __ASSEMBLY__ with __ASSEMBLER__ in arch headers
* tag 'xtensa-20250808' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
xtensa: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
This contains an extra patch that drops numa-node-id properties that
were added to the Tegra264 DT files by mistake.
-----BEGIN PGP SIGNATURE-----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=2IBm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OFV+
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.17-arm64-dt-v3' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
arm64: tegra: Device tree changes for v6.17-rc1
This contains an extra patch that drops numa-node-id properties that
were added to the Tegra264 DT files by mistake.
* tag 'tegra-for-6.17-arm64-dt-v3' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Remove numa-node-id properties
arm64: tegra: Add p3971-0089+p3834-0008 support
arm64: tegra: Add memory controller on Tegra264
arm64: tegra: Add Tegra264 support
dt-bindings: memory: tegra: Add Tegra264 support
Link: https://lore.kernel.org/r/20250731162920.3329820-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Support MMIO read/write tracing
- Enable THP swapping and THP migration
- Unmask SLCF bit ("stateless command filtering") introduced with
CEX8 cards, so that user space applications like lszcrypt could
evaluate and list this feature
- Fix the value of high_memory variable, so it considers possible
tailing offline memory blocks
- Make vmem_pte_alloc() consistent and always allocate memory of
PAGE_SIZE for page tables. This ensures a page table occupies
the whole page, as the rest of the code assumes
- Fix kernel image end address in the decompressor debug output
- Fix a typo in debug_sprintf_format_fn() comment
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaJSgORccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8OccAQDfJpNc8OWiL2Vo6kaXCo8e/q7X
p+k3Je7LQsaJjR2cPgD/Zhg8Uw2Z+HVdSF2uPioe0ftcwDFo8HJ+9hgyN848kQA=
=YdPI
-----END PGP SIGNATURE-----
Merge tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Support MMIO read/write tracing
- Enable THP swapping and THP migration
- Unmask SLCF bit ("stateless command filtering") introduced with CEX8
cards, so that user space applications like lszcrypt could evaluate
and list this feature
- Fix the value of high_memory variable, so it considers possible
tailing offline memory blocks
- Make vmem_pte_alloc() consistent and always allocate memory of
PAGE_SIZE for page tables. This ensures a page table occupies the
whole page, as the rest of the code assumes
- Fix kernel image end address in the decompressor debug output
- Fix a typo in debug_sprintf_format_fn() comment
* tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/debug: Fix typo in debug_sprintf_format_fn() comment
s390/boot: Fix startup debugging log
s390/mm: Allocate page table with PAGE_SIZE granularity
s390/mm: Enable THP_SWAP and THP_MIGRATION
s390: Support CONFIG_TRACE_MMIO_ACCESS
s390/mm: Set high_memory at the end of the identity mapping
s390/ap: Unmask SLCF bit in card and queue ap functions sysfs
