The SBSA UART should not be enabled or disabled (it is always on),
and consequently the spec lacks the UART_CR register.
Add a vendor specific property to skip disabling or enabling of the
UART. This will be used later by the SBSA UART support.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Naresh Bhat <nbhat@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To avoid lines with more than 80 characters and to make the
pl011_int() function more readable, move the workaround out into a
separate function.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Naresh Bhat <nbhat@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PL011 register UART_MIS is actually a bitwise AND of the
UART_RIS and the UART_MISC register.
Since the SBSA UART does not include the _MIS register, use the
two separate registers to get the same behaviour. Since we are
inside the spinlock and we read the _IMSC register only once, there
should be no race issue.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Naresh Bhat <nbhat@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the pl011_probe() function is relying on some AMBA IDs
and a device tree node to initialize the driver and a port.
Both features are not necessarily required for the driver:
- we lack AMBA IDs in the ARM SBSA generic UART and
- we lack a DT node in ACPI systems.
So lets refactor the function to ease later reuse.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Naresh Bhat <nbhat@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split the pl011_set_termios() function into smaller chunks to allow
easier reuse later when adding SBSA support.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Naresh Bhat <nbhat@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split the pl011_shutdown() function into smaller chunks to allow
easier reuse later when adding SBSA support.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Naresh Bhat <nbhat@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split the pl011_startup() function into smaller chunks to allow
easier reuse later when adding SBSA support.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Naresh Bhat <nbhat@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although we care about not unregistering the driver if there are
still ports connected during the .remove callback, we do miss this
check in the pl011_probe function. So if the current port allocation
fails, but there are other ports already registered, we will kill
those.
So factor out the port removal into a separate function and use that
in the probe function, too.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Naresh Bhat <nbhat@cavium.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the mediatek serial port driver is built-in, but serial
console is disabled in Kconfig (e.g. when the serial driver
itself is a loadable module), we get this build error:
drivers/built-in.o: In function `early_mtk8250_setup':
undefined reference to `early_serial8250_setup'
To avoid that problem, this patch encloses the early_mtk8250_setup
function in #ifdef CONFIG_SERIAL_8250_CONSOLE, the same symbol
that guards the early_serial8250_setup function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A configuration that enables earlycon but not the core console
code causes a link error:
drivers/built-in.o: In function `setup_earlycon':
drivers/tty/serial/earlycon.c:70: undefined reference to `uart_parse_earlycon'
That error can be triggered by the newly added samsung earlycon support,
which is missing a 'select' statement.
As suggested by Peter Hurley, solves the problem by moving the
'select SERIAL_EARLYCON' statement to the samsung console driver
option, as it is done by all other console drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: b94ba0328d ("serial: samsung: Add support for early console")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The platform_sysrq_reset_seq code was intended as a way for an embedded
platform to provide its own sysrq sequence at compile time. After over
two years, nobody has started using it in an upstream kernel, and
the platforms that were interested in it have moved on to devicetree,
which can be used to configure the sequence without requiring kernel
changes. The method is also incompatible with the way that most
architectures build support for multiple platforms into a single
kernel.
Now the code is producing warnings when built with gcc-5.1:
drivers/tty/sysrq.c: In function 'sysrq_init':
drivers/tty/sysrq.c:959:33: warning: array subscript is above array bounds [-Warray-bounds]
key = platform_sysrq_reset_seq[i];
We could fix this, but it seems unlikely that it will ever be used,
so let's just remove the code instead. We still have the option to
pass the sequence either in DT, using the kernel command line,
or using the /sys/module/sysrq/parameters/reset_seq file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 154b7a489a ("Input: sysrq - allow specifying alternate reset sequence")
----
v2: moved sysrq_reset_downtime_ms variable to avoid introducing a compile
warning when CONFIG_INPUT is disabled
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function mctrl_gpio_init returns failure if the assignment to any
member of the gpio array results in an error pointer. So there is no
need to check for such error values in the other functions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The currently in-use port->startup and port->shutdown are "okay". The
startup part for instance does the tiny omap extra part and invokes
serial8250_do_startup() for the remaining pieces. The workflow in
serial8250_do_startup() is okay except for the part where UART_RX is
read without a check if there is something to read. I tried to
workaround it in commit 0aa525d118 ("tty: serial: 8250_core: read only
RX if there is something in the FIFO") but then reverted it later in
commit ca8bb4aefb ("serial: 8250: Revert "tty: serial: 8250_core: read
only RX if there is something in the FIFO"").
This is the second attempt to get it to work on older OMAPs without
breaking other chips this time
Peter Hurley suggested to pull in the few needed lines from
serial8250_do_startup() and drop everything else that is not required
including making it simpler like using just request_irq() instead the
chain handler like it is doing now.
So lets try that.
Fixes: ca8bb4aefb ("serial: 8250: Revert "tty: serial: 8250_core:
read only RX if there is something in the FIFO"")
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the call to dmaengine_slave_config() fails, then the DMA buffer will
not be freed/unmapped. Fix this by moving the code that stores the
address of the buffer in the tegra_uart_port structure to before the
call to dmaengine_slave_config().
Reported-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
it seems this is a more typical behaviour from reviewing other console
drivers.
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add overrun error's flag mark and parity's counter, we can show the
statistic from procfs node.
BTW, let the indentation of stick bits configuration look better.
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In special condition, when cpu schedule into rx_tmo_process_tl or
rx_dma_complete_tl and all the receive dma tasks have done, it will
go into endless loop because no dma task cookie status be changed.
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>From HW spec, when rxfifo's data is less than AFC_RX_THD(RX threshhold), RTS
signal is active. otherwise, RTS signal is inactive.
Crrently the RX threshhold is set as zero, so RTS has no chance to be
active. This patch replaces the default 0 by a positive number.
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
differentiate difference port types by re-defining the status MARCO
or putting HW differences into private data of the related ports.
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This comment does not reflect the actual code. It should be 57600,
not 56000.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In RS485 mode, we may want to set the delay_rts_after_send value to 0.
In the datasheet, the 0 value is said to "disable" the Transmitter Timeguard but
this is exactly the expected behavior if we want no delay...
Moreover, if the value was set to non-zero value by device-tree or earlier
ioctl command, it was impossible to change it back to zero.
Reported-by: Sami Pietikäinen <Sami.Pietikainen@wapice.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 02730d3c05
(Merge 4.1-rc4 into tty-next), git mismerged some lines,
reintroducing a reference to the removed field
uart_amba_port.tx_irq_seen. This causes a build failure.
This patch removes the mismerged lines, restoring the code to what
was in tty-next (which was the intention).
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* readtest: the signal-handling code was clobbering the error codes we should
be handling/reporting in this test, rendering it useless. Noticed by Coverity.
* the common SPI NOR flash DT binding (merged for 4.1-rc1) is being revised,
so let's change that before 4.1 is minted.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVWDh6AAoJEFySrpd9RFgtsXoP/3tonpZtksRzwjJno3dewswV
sAcB+5BNPGQaRta6ZRmi2UmpX0GP9hqcnYuLHfyxHsVEMJgDvhJP6XHg6Jc6I1qd
9q8c8Aq0Yhfat5oJI0E4LfgwoEqIn4diy8TKr8SuCAVUamam/I7w6chpQRru8YQq
cdMaNSkDWBSnKDE2JJrtgHUQadWvoSDUomQ0WTJiq7JxDjcqhAukLngJAyGJj8U1
lOpxdyUvj+lSn1fzmkjaFEzSnQN5EqZZ+LBot7Y3HyVavzvcuue8cyIQk8EoKAJD
WLuajbCy5NYDYzuUvWw4PSHK+6kKj9SRytmlQ3fW6iwY/RHE78gQJIPFQUCbZNJ8
1D4ypxbT4dS8iJVEp8srfVrKTXYzP+CmUfOH1AFiUrv1qbjZKclGNa+kgsnAkqys
CCgUdp5bM2pwpGSacpCikpm57AuXj5KxF1HOMes6Vhrq4y58KO5D91htwnVHWWJH
KwxLeCQHXMnCFfGa/507bjHxOLQEoMV7S4V31FI8MJVIbR0vvTZ07Ns1oQVlxpR0
DWyHhwYHwyvP/xhNZx3wVKa8R31ltMqofR0NPmdwyFCcfBd3iAbobZfmhZzgVWY3
WxI+j6X4TCDgFqUCEDl/J+qhZxl5ye9JdNijJyrzzNYbwqqffSVqiUZiCbc/lgQJ
FWR9zZV0BPOkZL4DG4VE
=13mb
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"Two MTD fixes for 4.1:
- readtest: the signal-handling code was clobbering the error codes
we should be handling/reporting in this test, rendering it useless.
Noticed by Coverity.
- the common SPI NOR flash DT binding (merged for 4.1-rc1) is being
revised, so let's change that before 4.1 is minted"
* tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd:
Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"
mtd: readtest: don't clobber error reports
Here are some USB fixes and new device ids for 4.1-rc4. All are pretty
minor, and have been in linux-next successfully.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlVX4DEACgkQMUfUDdst+ynfngCfcs8LxLL4au1ig7X7b5zN9qzw
SYwAnj5IoQEDMVfpvoq1Pb2+g3KMCodl
=GMQH
-----END PGP SIGNATURE-----
Merge tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes and new device ids for 4.1-rc4.
All are pretty minor, and have been in linux-next successfully"
* tag 'usb-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices
Added another USB product ID for ELAN touchscreen quirks.
xhci: gracefully handle xhci_irq dead device
xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256
xhci: fix isoc endpoint dequeue from advancing too far on transaction error
usb: chipidea: debug: avoid out of bound read
USB: visor: Match I330 phone more precisely
USB: pl2303: Remove support for Samsung I330
USB: cp210x: add ID for KCF Technologies PRN device
usb: gadget: remove incorrect __init/__exit annotations
usb: phy: isp1301: work around tps65010 dependency
usb: gadget: serial: fix re-ordering of tx data
usb: gadget: hid: Fix static variable usage
usb: gadget: configfs: Fix interfaces array NULL-termination
usb: gadget: xilinx: fix devm_ioremap_resource() check
usb: dwc3: dwc3-omap: correct the register macros
Here's some TTY and serial driver fixes for reported issues. All of
these have been in linux-next successfully.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlVX4JMACgkQMUfUDdst+ymy/QCfSx/npI/WfRNlKBMHI20xwOaE
szQAoJKRxeF0d+2GCJ56OVbmqqjnG4IN
=FUtJ
-----END PGP SIGNATURE-----
Merge tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here's some TTY and serial driver fixes for reported issues.
All of these have been in linux-next successfully"
* tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
pty: Fix input race when closing
tty/n_gsm.c: fix a memory leak when gsmtty is removed
Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open"
serial: omap: Fix error handling in probe
earlycon: Revert log warnings
Here's some staging and iio driver fixes to resolve a number of reported
issues. All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlVX4PsACgkQMUfUDdst+ynGagCg0TP6R6jchyJqe5Cw45PovkQ1
r+gAnRMF+wc7Q2vGJYV7tSLQxpcxBRVk
=NPXR
-----END PGP SIGNATURE-----
Merge tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver fixes from Greg KH:
"Here's some staging and iio driver fixes to resolve a number of
reported issues.
All of these have been in linux-next for a while"
* tag 'staging-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (31 commits)
iio: light: hid-sensor-prox: Fix memory leak in probe()
iio: adc: cc10001: Add delay before setting START bit
iio: adc: cc10001: Fix regulator_get_voltage() return value check
iio: adc: cc10001: Fix incorrect use of power-up/power-down register
staging: gdm724x: Correction of variable usage after applying ALIGN()
iio: adc: cc10001: Fix the channel number mapping
staging: vt6655: lock MACvWriteBSSIDAddress.
staging: vt6655: CARDbUpdateTSF bss timestamp correct tsf counter value.
staging: vt6655: vnt_tx_packet Correct TX order of OWNED_BY_NIC
staging: vt6655: Fix 80211 control and management status reporting.
staging: vt6655: implement IEEE80211_TX_STAT_NOACK_TRANSMITTED
staging: vt6655: device_free_tx_buf use only ieee80211_tx_status_irqsafe
staging: vt6656: use ieee80211_tx_info to select packet type.
staging: rtl8712: freeing an ERR_PTR
staging: sm750: remove incorrect __exit annotation
iio: kfifo: Set update_needed to false only if a buffer was allocated
iio: mcp320x: Fix occasional incorrect readings
iio: accel: mma9553: check input value for activity period
iio: accel: mma9553: add enable channel for activity
iio: accel: mma9551_core: prevent buffer overrun
...
Here is one fix, in the extcon subsystem, that resolves a reported
issue. It's been in linux-next for a number of weeks now, sorry for not
getting it to you sooner.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlVX4VEACgkQMUfUDdst+yk3sQCgtlRpHuuO0p7VAKHakWixhK7i
7D0An16DODuDxlf00fIZDkGr8lcZ+pXb
=GiRC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is one fix, in the extcon subsystem, that resolves a reported
issue.
It's been in linux-next for a number of weeks now, sorry for not
getting it to you sooner"
* tag 'char-misc-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
extcon: usb-gpio: register extcon device before IRQ registration
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=zGn5
-----END PGP SIGNATURE-----
Merge tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifs
Pull UBI bufix from Richard Weinberger:
"This contains a single bug fix for the UBI block driver"
* tag 'upstream-4.1-rc4' of git://git.infradead.org/linux-ubifs:
UBI: block: Add missing cache flushes
Pull thermal fixes from Zhang Rui:
"Specifics:
- fix an issue in intel_powerclamp driver that idle injection target
is not accurately maintained on newer Intel CPUs. Package C8 to
C10 states are introduced on these CPUs but they were not included
in the package c-state residency calculation. From Jacob Pan.
- fix a problem that package c-state idle injection was missing on
Broadwell server, by adding its id to intel_powerclamp driver.
From Jacob Pan.
- a couple of small fixes and cleanups from Joe Perches, Mathias
Krause, Dan Carpenter and Anand Moon"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
tools/thermal: tmon: fixed the 'make install' command
thermal: rockchip: fix an error code
thermal/powerclamp: fix missing newer package c-states
thermal/intel_powerclamp: add id for broadwell server
thermal/intel_powerclamp: add __init / __exit annotations
thermal: Use bool function return values of true/false not 1/0
Pull parisc fixes from Helge Deller:
"One important patch which fixes crashes due to stack randomization on
architectures where the stack grows upwards (currently parisc and
metag only).
This bug went unnoticed on parisc since kernel 3.14 where the flexible
mmap memory layout support was added by commit 9dabf60dc4. The
changes in fs/exec.c are inside an #ifdef CONFIG_STACK_GROWSUP section
and will not affect other platforms.
The other two patches rename args of the kthread_arg() function and
fixes a printk output"
* 'parisc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures
parisc: copy_thread(): rename 'arg' argument to 'kthread_arg'
parisc: %pf is only for function pointers
In commit 8ff16cf77c ("Documentation: devicetree: m25p80: add "nor-jedec"
binding"), we added a generic "nor-jedec" binding to catch all
mostly-compatible SPI NOR flash which can be detected via the READ ID
opcode (0x9F). This was discussed and reviewed at the time, however
objections have come up since then as part of this discussion:
http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074
It seems the parties involved agree that "jedec,spi-nor" does a better
job of capturing the fact that this is SPI-specific, not just any NOR
flash.
This binding was only merged for v4.1-rc1, so it's still OK to change
the naming.
At the same time, let's move the documentation to a better name.
Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the
documentation.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Pull irq fix from Ingo Molnar:
"A tegra irqchip driver memory corruption fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: tegra: Set the proper base address in irq chip data
Pull drm fixes from Dave Airlie:
"Radeon:
one oops fix, one bug fix, one pci id addition patch
i915:
one suspend/resume regression fix.
All seems quiet enough."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: don't do mst probing if MST isn't enabled.
drm/radeon: add new bonaire pci id
drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling
drm/i915: Avoid GPU hang when coming out of s3 or s4
Merge misc fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, numa: really disable NUMA balancing by default on single node machines
MAINTAINERS: update Jingoo Han's email address
CMA: page_isolation: check buddy before accessing it
uidgid: make uid_valid and gid_valid work with !CONFIG_MULTIUSER
kernfs: do not account ino_ida allocations to memcg
gfp: add __GFP_NOACCOUNT
tools/vm: fix page-flags build
drivers/rtc/rtc-armada38x.c: remove unused local `flags'
fix one gpu hang on resume.
* tag 'drm-intel-fixes-2015-05-13' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Avoid GPU hang when coming out of s3 or s4
radeon minor fixes, and pci id addition.
* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: don't do mst probing if MST isn't enabled.
drm/radeon: add new bonaire pci id
drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling
- The recent ACPICA commit that set the ACPI _REV return value to 2
(which is the value always used by Windows and now mandated by the
spec too) in order to prevent the firmware people from using it to
play tricks with us caused a serious audio regression to happen on
Dell XPS 13 (the AML on that machine uses the _REV return value to
decide how to expose audio to the OS and does that to hide the
lack of proper support for its I2S audio in Linux), so revert that
commit for now and we'll revisit the issue in the next cycle.
- Ensure that the ordering of acpi_reserve_resources() with respect
to the rest of the ACPI initialization sequence will always be
the same, or the IO or memory region occupied by the ACPI fixed
registers may be assigned to a PCI host bridge as a result of
a race and random breakage ensues going forward.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=N6C9
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Two fixes here, one revert of a recent ACPICA commit that broke audio
support on one Dell machine and a fix for a long-standing issue that
may cause systems to break randomly during boot.
Specifics:
- The recent ACPICA commit that set the ACPI _REV return value to 2
(which is the value always used by Windows and now mandated by the
spec too) in order to prevent the firmware people from using it to
play tricks with us caused a serious audio regression to happen on
Dell XPS 13 (the AML on that machine uses the _REV return value to
decide how to expose audio to the OS and does that to hide the lack
of proper support for its I2S audio in Linux), so revert that
commit for now and we'll revisit the issue in the next cycle.
- Ensure that the ordering of acpi_reserve_resources() with respect
to the rest of the ACPI initialization sequence will always be the
same, or the IO or memory region occupied by the ACPI fixed
registers may be assigned to a PCI host bridge as a result of a
race and random breakage ensues going forward"
* tag 'pm+acpi-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Permanently set _REV to the value '2'."
ACPI / init: Fix the ordering of acpi_reserve_resources()
Pull dmi fixes from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi_scan: Fix ordering of product_uuid
firmware: dmi_scan: Simplified displayed version
Here are a few device-id changes removing a duplicate entry, refining
another and adding a third.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=kack
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.1-rc4
Here are a few device-id changes removing a duplicate entry, refining
another and adding a third.
Signed-off-by: Johan Hovold <johan@kernel.org>
This causes an oops as we haven't initialised the mst
layer.
Reported-by: Dave Jones <<davej@codemonkey.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In function dmi_present(), dmi_walk_early() calls dmi_table(), which
calls dmi_decode(), which ultimately calls dmi_save_uuid(). This last
function makes a decision based on the value of global variable
dmi_ver. The problem is that this variable is set right _after_
dmi_walk_early() returns. So dmi_save_uuid() always sees dmi_ver == 0
regardless of the actual version implemented.
This causes /sys/class/dmi/id/product_uuid to always use the old
ordering even on systems implementing DMI/SMBIOS 2.6 or later, which
should use the new ordering.
This is broken since kernel v3.8 for legacy DMI implementations and
since kernel v3.10 for SMBIOS 2 implementations. SMBIOS 3
implementations with the 64-bit entry point are not affected.
The first breakage does not matter much as in practice legacy DMI
implementations are always for versions older than 2.6, which is when
the UUID ordering changed. The second breakage is more problematic as
it affects the vast majority of x86 systems manufactured since 2009.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 9f9c9cbb60 ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists")
Fixes: 79bae42d51 ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()")
Acked-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Artem Savkov <artem.savkov@gmail.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: stable@vger.kernel.org [v3.10+]
The trailing .x adds no information for the reader, and if anyone
tries to parse that line, this is more work as they have 3 different
formats to handle instead of 2. Plus, this makes backporting fixes
harder.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 95be58df74 ("firmware: dmi_scan: Use full dmi version for SMBIOS3")
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Second version of this pull request as a small fix to a fix turned
up before Greg pulled it for a cc10001 patch near the top of the tree.
One core fix
* Set updated for a iio kfifo was incorrectly set to false during a failed
update, resulting in atttempts to repeat the failed operation appearing
to succeed.
This time I've decided to list the driver fixes in alphabetical order rather
than 'randomly'.
* axp288_adc - a recent change added a check for valid info masks when
reading channels from consumer drivers.
* bmp280 - temperature compensation was failing to read the tfine value, hence
causing a temperature of 0 to always be returned and incorrect presure
measurements.
* cc10001 - Fix channel number mapping when some channels are reserved for
remote CPUs. Fix an issue with the use of the power-up/power-down register
(basically wrong polarity). Fix an issue due to the missinterpretting the
return value from regulator_get_voltage. Add a delay before the start bit
as recommended for the hardware to avoid data corruption.
* hid pressure - fix channel spec of modfiied, but no modifier (which makes no
sense!)
* hid proximity - fix channel spec of modified, but no modifier (which makes
no sense!). Fix a memory leak in the probe function.
* mcp320x - occasional incorrect readings on dma using spi busses due to
cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
* mma9551 - buffer overrun fix (miss specified maximum length of buffers)
* mma9553 - endian fix on status message. Add an enable element for activity
channel. Input checking for activity period to avoid rather unpredictable
results.
* spmi-vadc - fix an overflow in the output value normalization seen on some
boards.
* st-snesors - oops due to use of a mutex that is not yet initialized during
probe.
* xilinx adc - Some wrong register addresses, a wrong address for vccaux
channel, incorrect scale on VREFP and incorrect sign on VREFN.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PiG+
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-4.1a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
The usual mixed bag of fixes for IIO in the 4.1 cycle.
Second version of this pull request as a small fix to a fix turned
up before Greg pulled it for a cc10001 patch near the top of the tree.
One core fix
* Set updated for a iio kfifo was incorrectly set to false during a failed
update, resulting in atttempts to repeat the failed operation appearing
to succeed.
This time I've decided to list the driver fixes in alphabetical order rather
than 'randomly'.
* axp288_adc - a recent change added a check for valid info masks when
reading channels from consumer drivers.
* bmp280 - temperature compensation was failing to read the tfine value, hence
causing a temperature of 0 to always be returned and incorrect presure
measurements.
* cc10001 - Fix channel number mapping when some channels are reserved for
remote CPUs. Fix an issue with the use of the power-up/power-down register
(basically wrong polarity). Fix an issue due to the missinterpretting the
return value from regulator_get_voltage. Add a delay before the start bit
as recommended for the hardware to avoid data corruption.
* hid pressure - fix channel spec of modfiied, but no modifier (which makes no
sense!)
* hid proximity - fix channel spec of modified, but no modifier (which makes
no sense!). Fix a memory leak in the probe function.
* mcp320x - occasional incorrect readings on dma using spi busses due to
cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
* mma9551 - buffer overrun fix (miss specified maximum length of buffers)
* mma9553 - endian fix on status message. Add an enable element for activity
channel. Input checking for activity period to avoid rather unpredictable
results.
* spmi-vadc - fix an overflow in the output value normalization seen on some
boards.
* st-snesors - oops due to use of a mutex that is not yet initialized during
probe.
* xilinx adc - Some wrong register addresses, a wrong address for vccaux
channel, incorrect scale on VREFP and incorrect sign on VREFN.
The irq chip functions use the irq chipdata directly as the base register
address of the controller, so this should be passed in instead of a pointer
to the array address holding the base address.
This fixes Tegra20 CPUidle as now the un-/masking of IRQs at the LIC level
works again, but more importantly it fixes the resulting memory corruption.
Fixes: de3ce08049 ' irqchip: tegra: Add DT-based support for legacy interrupt controller'
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/1431202014-3136-1-git-send-email-dev@lynxeye.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>