The 'dac[01]_range' is only used in the attach of the board. Remove
it from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'adc_range' is only used in the attach of the board. Remove it
from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'adc_mux' is only used in the attach of the board. Remove it
from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, move the call to comedi_alloc_subdevices()
so it occurs right before the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Interrupts are not enabled, or used, in this driver. Remove the
{request,free}_irq() as well as the dummy interrupt function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi core initializes the dev->board_name before calling the
driver (*attach) function. There is not reason to reinitialize it
in the driver.
Use the dev->board_name when doing the request_{region,irq}() instead
of the open-coded string.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The printk's during the bard attach are just added noise. Remove
them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the debug noise that outputs the board 'fingerprint' during
the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the boardinfo data that is set to '0', this is the default.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, move the boardinfo table near the struct
definition. Reformat the boardinfo in C99 format and add some
whitespace to help readability.
Rename the boardinfotable so it has namespace associated with
the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This forward declaration is not needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup the whitespace in the comedi_lrange tables.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the MODULE_DESCRIPTION to better describe the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a local variable to hold the base register, 'reg', that is used
to read from the device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a local variable to hold the base register, 'reg', that is used
to write to the relays.
Add local variables for the 'mask' and 'bits' values used to update
the relays.
The relays only need to be updated if the 'mask' is set. Move the outb()
calls into the if (mask) to make this clearer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, and to help with greps, rename the (*insn_bits)
functions in this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, add some whitespace to the subdevice init
to make it more readable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver does not use interrupts and the dev->irq variable is
already set to '0' when then (*attach) function is called. Setting
it in the driver is unnecessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'iorange' local variable is only used in the request_region()
call. Remove the variable and just use the board->io_range directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi core initializes the dev->board_name before calling the
driver (*attach) function. There is not reason to reinitialize it
in the driver.
Use the dev->board_name when doing the request_resource() instead
of the open-coded string.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The printk's during the board attach are just added noise. Remove
them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, move the boardinfo table near the struct
definition. Remove the unnecessary comments in the struct definition.
Reformat the boardinfo in C99 format and add some whitespace to
help readability.
Rename the boardinfo struct and the boardinfo table so they have
namespace associated with the driver.
Remove the ACL7225_SIZE and P16R16DIO_SIZE defines. They are only
used in the boardinfo table and the open-coded values provide the
information more clearly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver adds support for the Television Encoder integrated
on i.MX53 SoCs (TVEv2).
Currently only the VGA output mode is supported, which only uses
the TVDAC to generate RGB levels. HSYNC and VSYNC signals are
routed directly from the IPU signal generator pins through IOMUXC.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add WRG and WCLK opcodes to the display controller microcode,
and allow multi instruction codes.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds display interface timings for the Television Encoder
connected to IPU DI1 on i.MX53 and adds some configuration
glue code to select which IPU signal generators / pins are to
be used for HSYNC/VSYNC signals.
The default configuration is pin2/pin3 for hsync/vsync. The
VGA connector on i.MX53-QSB uses pin7/pin8, and the analog
part of the DVI-I connector on MBa53 connects to pin4/pin6.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
24-bit GBR order is needed on the display interface connected
to the Television Encoder (TVEv2) on i.MX53.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the failure path, stat->start and stat->pages will refer same page.
So it'll attempt to free the same page again and get kernel panic.
Link: http://lkml.kernel.org/r/1364820385-32027-1-git-send-email-namhyung@kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
update mail address with my private gmail address for
pm8001 driver
Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
We can't compile a kernel with CONFIG_ALTIVEC=n when
CONFIG_PPC_TRANSACTIONAL_MEM=y. We currently get:
arch/powerpc/kernel/tm.S:320: Error: unsupported relocation against THREAD_VSCR
arch/powerpc/kernel/tm.S:323: Error: unsupported relocation against THREAD_VR0
arch/powerpc/kernel/tm.S:323: Error: unsupported relocation against THREAD_VR0
etc.
The below fixes this with a sprinkling of #ifdefs.
This was found by mpe with kisskb:
http://kisskb.ellerman.id.au/kisskb/buildresult/8539442/
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
The service parameters for the VPI/RPIs were incorrect, resulting in
lower utilization
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
The logic here is better expressed with a switch statement.
While we're here, CLOSED stateids (or stateids of an unkown type--which
would indicate a server bug) should probably return nfserr_bad_stateid,
though this behavior shouldn't affect any non-buggy client.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fixed NMI watch dog panic's when resetting the hba.
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=X1N2
-----END PGP SIGNATURE-----
Merge tag 'devel-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
From Kukjin Kim <kgene.kim@samsung.com>:
including various development for samsung for v3.10
* tag 'devel-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: replace cpumask by the corresponding macro
ARM: EXYNOS: handle properly the return values
ARM: EXYNOS: factor out the idle states
ARM: SAMSUNG: check processor type before cache restoration in resume
ARM: S3C64XX: Slow down mic detection rate for wm5102
ARM: S3C64XX: Clear DMA flags on channel request
ARM: EXYNOS: Clear ENABLE_WAKEUP_SW bit when entering suspend
ARM: EXYNOS: Remove hardcode wakeup unmask for EINT_0
ARM: EXYNOS: Add support for rtc wakeup
ARM: SAMSUNG: Export MIPI CSIS/DSIM PHY control functions
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Using bool can make code more readable.
Convert uses and tests of int to bool.
This also makes a comparison of tg3->link_up
(itself bool) a bool comparison instead of int.
Reorder stack variable declarations to make
bool fit declaration holes where appropriate.
$ size drivers/net/ethernet/broadcom/tg3.o*
text data bss dec hex filename
169958 27249 58896 256103 3e867 drivers/net/ethernet/broadcom/tg3.o.new
169968 27249 58896 256113 3e871 drivers/net/ethernet/broadcom/tg3.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The main aim for this cycle is to have the u8540 booting to a
console. However, the u8540 doesn't support all of the u8500
platform devices yet. After this stage is complete we can then
fill in the inadequacies, such as specific clock support at a
later date. To achieve this we're placing devices supported by
all platforms into a common device structure and the remaining
ones into a platform specific one.
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=OIUa
-----END PGP SIGNATURE-----
Merge tag 'secure-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/firmware
From Kukjin Kim <kgene.kim@samsung.com>:
add support secure firmware for exynos
* tag 'secure-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up
ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.
ARM: EXYNOS: Add support for Exynos secure firmware
ARM: EXYNOS: Add support for secure monitor calls
ARM: Add interface for registering and calling firmware-specific operations
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
