Allows the OMAP HS USB host controller to be specified
via device tree.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
PHY reset GPIO handling will be done in the PHY driver
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Add the GPIO I/O memory range to the r8a7790 PFC device.
This extra I/O memory range is needed when using the PFC
tables to drive both pin functions (using PINCTRL or
function GPIO for old code) and actual GPIO. The goal is
however to use a separate GPIO driver in the long run
and when that happens this extra I/O memory range can
be removed.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The pin functions associated to the ethernet controller were introduced
with the label "wemac", which was the name of the ethernet driver in the
allwinner source tree, while the real name of the IP is actually "emac",
as advertised in several documents including the datasheet.
Since this is part of the device tree bindings, and that these part of
the bindings have not yet be released in a kernel version, it seems like
the good timing to change it and assure consistency.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move the f2fs_balance_fs out of the truncate_hole function and only
perform that in punch_hole use case. The commit:
ed60b1644e7f7e5dd67d21caf7e4425dff05dad0
intended to do this but moved it into truncate_hole to cover more
cases. However, a deadlock scenario is possible when deleting an inode
entry under specific conditions:
f2fs_delete_entry()
mutex_lock_op(sbi, DENTRY_OPS);
truncate_hole()
f2fs_balance_fs()
mutex_lock(&sbi->gc_mutex);
f2fs_gc()
write_checkpoint()
block_operations()
mutex_lock_op(sbi, DENTRY_OPS);
Lets move it into the punch_hole case to cover the original intent of
avoiding it during fallocate's expand_inode_data case.
Change-Id: I29f8ea1056b0b88b70ba8652d901b6e8431bb27e
Signed-off-by: Jason Hrycay <jason.hrycay@motorola.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
For realistic systems the power management is controlled entirely via
runtime PM - if the device is not runtime suspended then the suspend
will abort without doing anything as functionality such as accessory
detection or audio bypass will require the device to be enabled while
if the device is runtime suspended it is already in the lowest power
state. This means that system suspend is redundant and can be removed
which avoids issues with attempting to double disable the regulators.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
AB8500 asserts LATCH bits for masked out interrupts. This patch
explicitly masks those out using the cached mask value to prevent
handle_nested_irq() being called for masked IRQ on the same register as
unmasked ones.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Exynos5440 supports gpio interrupts on gpios 16 to 23. The eight interrupt lines
originating from the pin-controller are connected to the gic. Add irq-chip support
for these interrupts.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Twelve Kconfig symbols, all related to WM8350, WM8351, and WM8352, are
unused. Commit 19d57ed5a3 ("mfd: Remove
custom wm8350 cache implementation") removed all their (actual) users.
Remove these symbols too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The property 'samsung,exynos5440-pins' is optional in configuration nodes
which are included in the Exynos5440 pin-controller device node. Fix the
incorrect failure in driver probe if 'samsung,exynos5440-pins' property
is not found in the configuration nodes.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch changes the irq state from high to the now default low.
Because the default PMIC irq state of DA9055 got changed from high to low.
This change should not affect any of the existing users since all of them
use active low state.
This patch has been tested on smdkv6410.
Signed-off-by: Ashish <ashish.jangam@kpitcummins.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Silences the following warnings:
drivers/pinctrl/pinctrl-ab8505.c:274:28: warning:
symbol 'ab8505_alternate_functions' was not declared. Should it be static?
drivers/pinctrl/pinctrl-ab8505.c:351:32: warning:
symbol 'ab8505_gpio_irq_cluster' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().
Cc: linux-stable <stable@vger.kernel.org> # >= v3.2
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Silences the following warnings:
drivers/pinctrl/pinctrl-ab8540.c:302:28: warning:
symbol 'ab8540_alternate_functions' was not declared. Should it be static?
drivers/pinctrl/pinctrl-ab8540.c:379:32: warning:
symbol 'ab8540_gpio_irq_cluster' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following warnings:
drivers/pinctrl/pinctrl-ab9540.c:382:28: warning:
symbol 'ab9540alternate_functions' was not declared. Should it be static?
drivers/pinctrl/pinctrl-ab9540.c:457:32: warning:
symbol 'ab9540_gpio_irq_cluster' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These symbols are used only in this file. Silences the following
warnings:
drivers/pinctrl/pinctrl-ab8500.c:392:28: warning:
symbol 'ab8500_alternate_functions' was not declared. Should it be static?
drivers/pinctrl/pinctrl-ab8500.c:458:32: warning:
symbol 'ab8500_gpio_irq_cluster' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These symbols are used only in this file. Without this patch
we get the following warnings:
drivers/pinctrl/pinctrl-abx500.c:520:5: warning:
symbol 'abx500_gpio_request' was not declared. Should it be static?
drivers/pinctrl/pinctrl-abx500.c:527:6: warning:
symbol 'abx500_gpio_free' was not declared. Should it be static?
drivers/pinctrl/pinctrl-abx500.c:614:5: warning:
symbol 'abx500_gpio_request_enable' was not declared. Should it be static?
drivers/pinctrl/pinctrl-abx500.c:714:5: warning:
symbol 'abx500_pin_config_get' was not declared. Should it be static?
drivers/pinctrl/pinctrl-abx500.c:721:5: warning:
symbol 'abx500_pin_config_set' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Allows the OMAP USB TLL module to be specified via device tree.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This is because we want to get rid of platform_data usage from probe().
The only information we need is PORT_MODE, and this can be supplied
to us by the user (i.e. omap-usb-host.c).
We also move channel clock management from runtime PM handlers into
omap_tll_enable/disable().
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch adds pinctrl-s3c64xx driver which implements pin control
interface for Samsung S3C64xx SoCs.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds support for banks that have more than one function
configuration registers, e.g. some of the banks of S3C64xx SoCs.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch replaces statically hardcoded register offsets of Exynos SoCs
with an array of register offsets in samsung_pin_bank_type struct.
Thanks to this change, support for SoCs with other set and order of
registers can be added (e.g. S3C24xx and S3C64xx).
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
EHCI driver would need to know the number of ports available
on the platform. We set the nports parameter of platform_data
based on IP version if it was not already provided.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch splits pin bank description into two structures, one
describing bank type (currently only bitfield widths), which can be
shared across multiple banks and second containing bank-specific
parameters including a pointer to a bank type struct.
It is a prerequisite for further patch removing the statically hardcoded
register offsets, making it impossible to support SoCs with different
set and order of pin control registers.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since pinctrl-samsung is a common part of the pin control support for
several Samsung SoCs, it can be compiled without Exynos support enabled.
This patch surrounds Exynos-specific driver data with ifdefs to include
them only when support for Exynos is enabled.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
[Fixed up EXYNOS4->EXYNOS]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Certain pin control registers can be accessed from different contexts,
i.e. pinctrl, gpio and irq functions. This makes the locking provided by
pin control core insufficient.
This patch adds necessary locking using a per bank spinlock as it was
done in the old Samsung GPIO driver.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The existing uImage target always generates gzip compressed image which
drags bootup for some very slow FPGA customer boards.
So introduce seperate make targets:uImage.{bin,gz} with uncompressed
being default. Also tie gz generation to CONFIG_KERNEL_GZIP, which a
platform can select in it's Kconfig if it wishes gz to be default.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
We do cross compiles for ARC Linux.
With gcc 4.7, a make defconfig spews out the following:
------------------->8--------------------------
make ARCH=arc defconfig
gcc: error: unrecognized command line option '-marc600'
gcc: error: unrecognized command line option '-mA7'
gcc: error: unrecognized command line option '-mno-sdata'
gcc: error: unrecognized command line option '-mno-mpy'
*** Default configuration is based on 'fpga_defconfig'
------------------->8--------------------------
This apparently is coming from LIBGCC line - which is strange to be
invoked for defconfig generation.
Reported-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
There's no (Kconfig) macro CONFIG_BLOCK_DEV_RAM. (CONFIG_BLK_DEV_RAM
does exist though.) But linux/blk.h got killed in 2005 anyway (in a
patch titled "kill blk.h"), so these three lines can be removed.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Some header files were included twice in the same file.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Fixes the following coding style issues as detected by checkpatch:
ERROR: space required before the open parenthesis '('
ERROR: "foo * bar" should be "foo *bar"
WARNING: space prohibited between function name and open parenthesis '('
WARNING: please, no spaces at the start of a line
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Silences the following checkpatch warnings:
WARNING: Use #include <linux/ptrace.h> instead of <asm/ptrace.h>
WARNING: Use #include <linux/kprobes.h> instead of <asm/kprobes.h>
WARNING: Use #include <linux/kgdb.h> instead of <asm/kgdb.h>
WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: Use #include <linux/cache.h> instead of <asm/cache.h>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
version.h header file inclusion is not necessary as detected by
versioncheck script.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
For playback add the codec-side delay to the timestamp, for capture
subtract it. This brings the timestamps in line with the time that
was recently added to the delay reporting.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
cpu_freq_select is used as array subscript, thus the valid value range
is 0 ... ARRAY_SIZE() - 1.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed up trivial merge issues]
Compiling for linux-3.9-rc1 and later fails with:
drivers/gpio/devres.c: In function 'devm_gpio_request_one':
drivers/gpio/devres.c:90:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration]
So provide a local gpio_request_one() function. Code largely borrowed from
blackfin's local gpio_request_one() function.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
get_new_mmu_context() is always called with interrupts disabled.
So it's possible to do this micro optimization.
(Also fix the comment to switch_mm, which is called in both cases)
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
sizeof() when applied to a pointer typed expression gives the size of the
pointer, not that of the pointed data.
Introduced by commit 3ce5ef(netrom: fix info leak via msg_name in nr_recvmsg)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will later allow NFS locking code to wait for readahead to complete
before releasing byte range locks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
- Suman fixed an issue that crawled in with the move to the new
idr_alloc interface in 3.9
- Dmitry fixed an STE specific memory leak
- Sjur fixed an error path in the core
- Rob fixed a Kconfig typo
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=+ds4
-----END PGP SIGNATURE-----
Merge tag 'remoteproc-3.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc
Pull remoteproc fixes from Ohad Ben-Cohen:
"Four small remoteproc fixes:
- Suman fixed an issue that crawled in with the move to the new
idr_alloc interface in 3.9
- Dmitry fixed an STE specific memory leak
- Sjur fixed an error path in the core
- Rob fixed a Kconfig typo"
* tag 'remoteproc-3.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
remoteproc: fix FW_CONFIG typo
remoteproc: fix error path of handle_vdev
remoteproc/ste: fix memory leak on shutdown
remoteproc: fix the error check for idr_alloc
Updating the clock tree topology must be protected with the spinlock
when doing clk_set_parent, otherwise we can not handle the migration
of the enable_count in a safe manner.
While issuing the .set_parent callback to make the clk-hw perform the
switch to the new parent, we can not hold the spinlock since it is must
be allowed to be slow path. This complicates error handling, but is still
possible to achieve.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Fixup the broken feature of allowing reparent of a clk to the
orhpan list and vice verse. When operating on a single-parent
clk, the .set_parent callback for the clk hw is optional to
implement, but for a multi-parent clk it is mandatory.
Moreover improve the errorhandling by verifying the prerequisites
before triggering clk notifiers. This will prevent unnecessary
rollback with ABORT_RATE_CHANGE.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Split __clk_reparent into three pieces, one for doing the actual
reparent for updating the clock tree topology, one for the
COMMON_CLK_DEBUG code and one for doing the rate recalculation.
This patch also makes it possible to hold the spinlock over the
update of the clock tree topology, which could not be done before
when both debugfs updates and clock rate updates was done within
the same function.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
- Fix 'function-mask' referring to TRM (Omap 36xx) Section 13.4.4:
"Pad Functional Multiplexing and Configuration".
- Fix 'omap3_pmx_wkup' referring to TRM Table 13-6:
"Wkup Control Module Pad Configuration Register Fields".
Note that these fixes are not critical currently as we
are not yet using the missing range of pinmux registers
at this point.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
It should be left to the drivers to enable and disable the device on the
MEI bus when e.g getting probed.
For drivers to be able to safely call the enable and disable hooks, the
mei_cl_ops must be set before it's probed and thus this should happen
before registering the device on the MEI bus. Hence the mei_cl_add_device()
prototype change.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Display errors causing device reset using dev_err and not dev_dbg
also change messages text to something more concise
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
