Return from `comedi_alloc_board_minor()` with the mutex of the created
`struct comedi_device` pre-locked. This allows further initialization
by the caller without the worry of something getting in there first.
`comedi_auto_config()` no longer needs to check if the device is already
"attached" since whatever was trying to attach the device would need to
have locked the mutex first.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change `comedi_alloc_board_minor()` to return a pointer to the allocated
`struct comedi_device` instead of a minor device number. Return an
`ERR_PTR()` value on error instead of a negative error number. This
saves a call to `comedi_dev_from_minor()` in `comedi_auto_config()`.
Also change it to use a local variable `dev` to hold the pointer to the
`struct comedi_device` instead of using `info->device` all the time.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`comedi_free_board_minor()` is now only called from the same .c file it
is defined in, so give it static linkage.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If `comedi_auto_config()` fails after allocating the minor device, call
`comedi_release_hardware_device()` instead of
`comedi_free_board_minor()` to free the minor device. That's the same
call that `comedi_auto_unconfig()` uses, and is slightly safer as it
checks the minor device number is still tied to the same hardware
device.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add `comedi_release_hardware_device()` as a replacement for the call
sequence `comedi_find_board_minor()`, `comedi_free_board_minor()`. This
is slightly safer as we can make sure nothing funny happens to the found
`comedi_file_info_table[]` entry in the middle of the sequence. Change
`comedi_auto_unconfig()` to call the new function instead of the old
sequence. Remove `comedi_find_board_minor()` as it has no other
callers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split out the part of `comedi_free_board_minor()` that clears the
`comedi_file_info_table[]` element into new function
`comedi_clear_minor()`. Split out the remainder of the original
function into new function `comedi_free_board_file_info()`.
Also re-use a call to `comedi_clear_minor()` in
`comedi_free_subdevice_minor()` instead of doing the same thing inline.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`comedi_device_cleanup()` is called just before freeing a comedi device.
It is possible for the device to still be open in which case the module
reference counts for the core comedi module and possibly the low-level
driver module will remain out of whack because `comedi_close()` will not
find the comedi device and so will not decrement the module counts.
This really needs to be handled better, but for now decrement the module
counts in `comedi_device_cleanup()` according to the number of
outstanding opens.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`comedi_device_init()` is only called from one place
(`comedi_alloc_board_minor()`) and the `struct comedi_device` has
already been zeroed out by `kzalloc()`. Don't bother zeroing it out
again with `memset()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the comedi core module, `comedi_file_info_table[]` is tentatively
defined in the .bss section, so will already be zeroed out on
initialization. Don't bother zeroing it out again in the module
initialization function `comedi_init()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do some minimal error checking of the parameters of
`comedi_auto_config()`. Just make sure the `hardware_device` and
`driver` parameters are non-NULL.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no any error handling in dgrp_create_class_sysfs_files().
The patch adds code to check return values and propagate them to dgrp_init_module().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `usbip list -l' command shows your local usb-devices.
Example:
$ usbip list -l
$ Local USB devices
$ =================
$ - busid 1-1 (13fe:1d00)
$ 1-1:1.0 -> usb-storage
$
$ - busid 1-2 (0409:55aa)
$ 1-2:1.0 -> hub
However this list command doesn't show which device is connected
to this busid. Therefore you have to use another tool e.g. lsusb
to determine that.
This patches adds the possibility to see which device that is.
Example:
$ usbip list -l
$ Local USB devices
$ =================
$ - busid 1-1 (13fe:1d00)
$ Kingston Technology Company Inc. : DataTraveler 2.0 1GB/4GB Flash Drive / Patriot Xporter 4GB Flash
$ 1-1:1.0 -> usb-storage
$
$ - busid 1-2 (0409:55aa)
$ NEC Corp. : Hub (0409:55aa)
$ 1-2:1.0 -> hub
If parsable is specified the info will be not printed.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The command `usbip attach' uses --host for specifing
the remote host, while `usbip list' uses --remote.
This is confusing and this patch adapts this.
In Addition changed the manpage and README accordingly.
Before:
$ usbip attach --host <host> -b <busid>
$ usbip list --remote <host>
Now:
$ usbip attach --remote <host> -b <busid>
$ usbip list --remote <host>
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the names.c/names.h are taken from another project, some
functions which names.c provides aren't used by usbipd.
This patch fixes:
- removed useless comments
- unified debug/error messages by using the macros
provided by usbip_common.h
- removed unnused code
The code cleanup includes:
- remove unused data structures
- remove code to create them
- remove code to access them
The file names.c is used to parse the `usb.ids' file. The parser
stores a lot of information about usb devices that is never used.
The `usb.ids' file has several sections. Some variables (like
`lasthut') store the ID of the current section, and those variables
are used to decide which section is currently being parsed (i.e. in
which data structure the current line will be stored).
We removed the code to read those IDs because they are never used
anyway. We replaced them by the pseudo-ID `1' (instead of reading the
ID from the file) to indicate that the parser is in a section that
can be ignored. If the parser is in such a section, the current line
(which contains sub-items for this section) is discarded.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since no usbip_name function is used in usbipd, it's not
necessary to parse "usb.ids" file at startup.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch simplified "stub_device_free" cleanup function:
- changed return type to void, since the return value is
not checked anywhere
- kfree is NULL-safe, so removed if statement
- deleted debug-message
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This for loop is not needed, since STUB_BUSID_OTHER is defined as 0.
In Addition added a comment if STUB_BUSID_OTHER changes sometime.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In each if-else case "return" is called. This is why
these if-else-statements are useless. Removing them
improves understanding and readability.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In each errorcase spin_unlock_irq is called and -EINVAL is returned.
To simplify that I created a label called "err" doing that.
On Success count will be returned.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove broken preprocessor macro "hardware". It is unused and it
references an element (pdev in vhci_hcd) that does not exist.
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enumerations for one comment makes no sense.
This is why this should be removed.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reformat function stub_recv_cmd_unlink() to improve readability.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While waking up CPU from off state using clock domain force wakeup, restore
the CPU power state to ON state before putting CPU clock domain under
hardware control. Otherwise CPU wakeup might fail. The change is recommended
for all OMAP4+ devices though the PRCM weakness was observed on OMAP5
devices first.
As a result of weakness, lock-up is observed inside the hardware state
machine of local CPU PRCM and results are UN-predictable as per designers.
In software testing, we have seen hard-locks most of the time where system
gets frozen. With power domain state restored, system behaves correctly.
So update the code accordingly.
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
There are some fields in "edata" which have not been cleared. One
example is edata.cmd. It leaks uninitialized stack information to the
user.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"cfg_ap_config" has a number of fields which are not cleared before we
copy them to the user. I've added a memset() at the beginning to set
everything to zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The simple mA ranges 0 to 20, 4 to 20, and 0 to 32 are fairly common.
Introduce them in the comedi core and use them in the drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the private range, range_usbdux_ao_range, in this driver and use
the comedi provided range_unipolar2_5 instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the private range, range_ni_S_ai_6143, in this driver and use
the comedi provided range_bipolar5 instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the private range, range_ni_M_622x_ao, in this driver and use
the comedi provided range_bipolar10 instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the private ranges, dt9812_2pt5_a{in,out}_range, in this
driver and use the comedi provided range_unipolar2_5 instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a simple unipolar 0 to 2.5 range, range_unipolar2_5, for
use by the comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the private ranges, dt9812_10_a{in,out}_range, in this driver
and use the comedi provided range_bipolar10 instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the private range, range_das800_ai, in this driver and use
the comedi provided range_bipolar5 instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the private range, range_ao_1, in this driver and use the
comedi provided range_bipolar10 instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the private range, ao_ranges_60xx, in this driver and use
the comedi provided range_bipolar10 instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"len" comes from the USB transfer and it's probably correct. The thing
is that we already have similar checks like:
if (data[i] >= serial->num_ports) {
So adding a sanity test here matches the rest of the code and is a good
idea.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can remove the "if (urb->actual_length) {" check because checking for
"while (i < urb->actual_length) {" is sufficient. This lets us pull the
code in one indent level.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In hardware_enqueue code adds one extra td with dma_pool_alloc if
mReq->req.zero is true. When _ep_nuke will be called for that endpoint,
dma_pool_free will not be called to free that memory again. That patch
fixes this.
Cc: stable <stable@vger.kernel.org> # v3.5
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from David Miller:
1) Fix erroneous sock_orphan() leading to crashes and double
kfree_skb() in NFC protocol. From Thierry Escande and Samuel Ortiz.
2) Fix use after free in remain-on-channel mac80211 code, from Johannes
Berg.
3) nf_reset() needs to reset the NF tracing cookie, otherwise we can
leak it from one namespace into another. Fix from Gao Feng and
Patrick McHardy.
4) Fix overflow in channel scanning array of mwifiex driver, from Stone
Piao.
5) Fix loss of link after suspend/shutdown in r8169, from Hayes Wang.
6) Synchronization of unicast address lists to the undelying device
doesn't work because whether to sync is maintained as a boolean
rather than a true count. Fix from Vlad Yasevich.
7) Fix corruption of TSO packets in atl1e by limiting the segmented
packet length. From Hannes Frederic Sowa.
8) Revert bogus AF_UNIX credential passing change and fix the
coalescing issue properly, from Eric W Biederman.
9) Changes of ipv4 address lifetime settings needs to generate a
notification, from Jiri Pirko.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
netfilter: don't reset nf_trace in nf_reset()
net: ipv4: notify when address lifetime changes
ixgbe: fix registration order of driver and DCA nofitication
af_unix: If we don't care about credentials coallesce all messages
Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL"
bonding: remove sysfs before removing devices
atl1e: limit gso segment size to prevent generation of wrong ip length fields
net: count hw_addr syncs so that unsync works properly.
r8169: fix auto speed down issue
netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths
mwifiex: limit channel number not to overflow memory
NFC: microread: Fix build failure due to a new MEI bus API
iwlwifi: dvm: fix the passive-no-RX workaround
netfilter: nf_conntrack: fix error return code
NFC: llcp: Keep the connected socket parent pointer alive
mac80211: fix idle handling sequence
netfilter: nfnetlink_acct: return -EINVAL if object name is empty
netfilter: nfnetlink_queue: fix error return code in nfnetlink_queue_init()
netfilter: reset nf_trace in nf_reset
mac80211: fix remain-on-channel cancel crash
...
If the state manager thread is already running, we may end up
racing with it in nfs_client_return_marked_delegations. Better to
just allow the state manager thread to do the job.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, if the application that holds the file open isn't doing
I/O, we may end up returning the delegation. This means that we can
no longer cache the file as aggressively, and often also that we
multiply the state that both the server and the client needs to track.
This patch adds a check for open files to the routine that scans
for delegations that are unreferenced.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All error cases are handled by the switch() statement, meaning that the
call to nfs4_handle_exception() is unreachable.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
