- container_of:
- Apply typeof_member(), remove the local __mptr variable to eliminate
variable shadowing warnings on nested container_of() calls, and remove
unnecessary parentheses.
- core:
- Add driver name to probe debug print for initcall_debug.
- Avoid repeatedly printing the same 'Fixed dependency cycle' log.
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device().
- Remove statistics group if encryption group creation fails in
transport_add_class_device().
- debugfs:
- Fix lockdown check for mmap_prepare().
- Warn if file creation failed due to uninitialized debugfs.
- device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from DEV_PROP_REF
properties to enable automatic probe ordering. Add kunit-managed fwnode
helpers and test coverage.
- Fix infinite loop in fwnode_for_each_child_node() when the secondary fwnode
has more than one child. Add test cases.
- Fix out-of-bounds access in software_node_get_reference_args() when called
with index -1 (UINT_MAX).
- Refactor to use RAII approach with __free().
- Add Bartosz Golaszewski as software node reviewer.
- firmware loader:
- Fix race where a sysfs fallback request can complete before being queued as
pending, leading to a use-after-free on the next fallback request.
- Reject 0-size built-in firmware and fail the build on empty firmware files
in CONFIG_EXTRA_FIRMWARE.
- kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros and
allow the constification of kobject attributes, enabling them to reside in
read-only memory.
- platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(), and
platform_device_set_of_node_from_dev() helpers that encapsulate firmware
node reference counting for dynamically allocated platform devices. Convert
all in-tree users that manually assigned dev.of_node or dev.fwnode, fixing a
pre-existing refcount bug in powermac. Switch to counting references of all
firmware node types, not only OF nodes.
- Unify the release path for dynamically allocated platform devices by
removing platform_device_release_full(). Amend the fwnode setter API
contract to warn if a primary software node is overwritten. Add KUnit tests
for correct software node removal on device unregistration.
- Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant ForLt types.
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements from
kernel::transmute traits to zerocopy traits.
- Device:
- Add BoundInternal device context and InternalBoundContext trait for bus
abstractions that need internal access to a bound device.
- Make the lifetime on Core and CoreInternal invariant to prevent coercion
to shorter lifetimes.
- Devres:
- Fix race between concurrent revokers where the losing revoker could return
before the winning revoker finished dropping the inner data, causing
use-after-free.
- Ensure revocation is complete before the device finishes unbinding by
making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens 'static back
to the caller's borrow scope. Implement ForLt and CovariantForLt for Bar,
IoMem, and ExclusiveIoMem.
- Driver:
- Switch from index-based to pointer-based device ID info lookup, storing
static references in driver_data. Centralize device ID handling in
device_id.rs, removing the open-coded ACPI/OF matching logic and duplicate
ID table from driver.rs.
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type for the
existing untyped case), create view types representing subregions of a
mapped I/O region, and add io_project!() for safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io) with a
blanket implementation, preventing implementers from overriding provided
methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile access, and
make Coherent implement Io via an I/O view type. Add IoSysMap as sum type
of Mmio and SysMem. Add copying methods (memcpy_{from,to}io()) and
read_val()/write_val() for typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!() for
primitives and copying methods for aggregates; drop the old macros.
Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro, remove
unused rule arguments, and use path fragments for alias destinations.
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers by
removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources.
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning type,
giving drivers explicit control over the allocation lifetime.
IrqVector embeds a resolved IrqRequest, making the conversion
infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX, PCI_IRQ_MSI,
or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline.
- Serdev:
- Add Rust abstractions for the serial device bus, including serdev::Driver
trait, serdev::Device wrapping struct serdev_device, and serdev::Adapter
implementing RegistrationOps. Includes a sample driver. Markus Probst
takes over as serdev maintainer for both C and Rust code.
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an unsafe
CovariantForLt subtrait guaranteeing covariance, enabling invariant types
(e.g. those containing Mutex<&'bound T>) to participate in the ForLt
abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef.
- misc:
- Avoid iattr allocation in kernfs listxattr by using kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark internal property
data as private for kernel-doc, and add property.h/fwnode.h to driver-api
infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaoSPugAKCRBFlHeO1qrK
LlBrAP958EaYZVyfAsqq0EyHv86ahXKWoDDvkwbRUZA5CfV9tAD/bMWVtPLRYaaq
eNEZT7p5w3Haezh61H3c5zpuwFNMTA0=
=VRIa
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"container_of:
- Apply typeof_member(), remove the local __mptr variable to
eliminate variable shadowing warnings on nested container_of()
calls, and remove unnecessary parentheses
core:
- Add driver name to probe debug print for initcall_debug
- Avoid repeatedly printing the same 'Fixed dependency cycle' log
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device()
- Remove statistics group if encryption group creation fails in
transport_add_class_device()
debugfs:
- Fix lockdown check for mmap_prepare()
- Warn if file creation failed due to uninitialized debugfs
device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from
DEV_PROP_REF properties to enable automatic probe ordering. Add
kunit-managed fwnode helpers and test coverage
- Fix infinite loop in fwnode_for_each_child_node() when the
secondary fwnode has more than one child. Add test cases
- Fix out-of-bounds access in software_node_get_reference_args() when
called with index -1 (UINT_MAX)
- Refactor to use RAII approach with __free()
- Add Bartosz Golaszewski as software node reviewer
firmware loader:
- Fix race where a sysfs fallback request can complete before being
queued as pending, leading to a use-after-free on the next fallback
request
- Reject 0-size built-in firmware and fail the build on empty
firmware files in CONFIG_EXTRA_FIRMWARE
kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros
and allow the constification of kobject attributes, enabling them
to reside in read-only memory
platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(),
and platform_device_set_of_node_from_dev() helpers that encapsulate
firmware node reference counting for dynamically allocated platform
devices
Convert all in-tree users that manually assigned dev.of_node or
dev.fwnode, fixing a pre-existing refcount bug in powermac. Switch
to counting references of all firmware node types, not only OF
nodes
- Unify the release path for dynamically allocated platform devices
by removing platform_device_release_full(). Amend the fwnode setter
API contract to warn if a primary software node is overwritten. Add
KUnit tests for correct software node removal on device
unregistration
Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant
ForLt types
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements
from kernel::transmute traits to zerocopy traits
- Device:
- Add BoundInternal device context and InternalBoundContext trait
for bus abstractions that need internal access to a bound
device.
- Make the lifetime on Core and CoreInternal invariant to prevent
coercion to shorter lifetimes
- Devres:
- Fix race between concurrent revokers where the losing revoker
could return before the winning revoker finished dropping the
inner data, causing use-after-free.
- Ensure revocation is complete before the device finishes
unbinding by making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens
'static back to the caller's borrow scope. Implement ForLt and
CovariantForLt for Bar, IoMem, and ExclusiveIoMem
- Driver:
- Switch from index-based to pointer-based device ID info lookup,
storing static references in driver_data. Centralize device ID
handling in device_id.rs, removing the open-coded ACPI/OF
matching logic and duplicate ID table from driver.rs
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type
for the existing untyped case), create view types representing
subregions of a mapped I/O region, and add io_project!() for
safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io)
with a blanket implementation, preventing implementers from
overriding provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile
access, and make Coherent implement Io via an I/O view type.
Add IoSysMap as sum type of Mmio and SysMem. Add copying
methods (memcpy_{from,to}io()) and read_val()/write_val() for
typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!()
for primitives and copying methods for aggregates; drop the old
macros. Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro,
remove unused rule arguments, and use path fragments for alias
destinations
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers
by removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning
type, giving drivers explicit control over the allocation
lifetime. IrqVector embeds a resolved IrqRequest, making the
conversion infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX,
PCI_IRQ_MSI, or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline
- Serdev:
- Add Rust abstractions for the serial device bus, including
serdev::Driver trait, serdev::Device wrapping struct
serdev_device, and serdev::Adapter implementing
RegistrationOps. Includes a sample driver. Markus Probst takes
over as serdev maintainer for both C and Rust code
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an
unsafe CovariantForLt subtrait guaranteeing covariance,
enabling invariant types (e.g. those containing Mutex<&'bound T>)
to participate in the ForLt abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef
misc:
- Avoid iattr allocation in kernfs listxattr by using
kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark
internal property data as private for kernel-doc, and add
property.h/fwnode.h to driver-api infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h"
* tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (129 commits)
rust: pci: expose the allocated interrupt type
PCI: Add pci_irq_type() to query the allocated interrupt type
rust: pci: remove request_irq() and request_threaded_irq() from Device
rust: pci: resolve IRQ in index() and embed IrqRequest in IrqVector
rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type
kernfs: avoid iattr allocation in listxattr
rust: serdev: use ThisModule::as_ptr() instead of field access
ACPI/IORT: use platform_device_set_fwnode()
ACPI/APMT: use platform_device_set_fwnode()
firmware_loader: do not queue completed sysfs fallback requests
rust: pci: Mark Device refcount methods inline
rust: irq: make Registration compatible with lifetime-bound drivers
rust: net/phy: remove expansion from doc
rust: dma: return zero for Coherent reads past EOF
rust: io: register: use path fragment for alias destination
rust: io: register: remove unused rule arguments
rust: io: register: dispatch shortcut rules internally
MAINTAINERS: add sys_soc.h to DRIVER CORE
rust: debugfs: remove unsafe blocks from traits impl for Vec
rust: debugfs: migrate debugfs traits requirements to zerocopy
...
This is a relatively busy release, though it's mostly cleanup work. We
did add some new hooks for regmap-irq to support some driver work, that
should also come in as part of a shared branch with the relevant driver
work in the GPIO subsystem.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmqDMxkACgkQJNaLcl1U
h9D2zAgAhtilvZs1DOVuoIMjOQ7EOSmaszoRBWGQKJ+T9FOj8QuSuJrTj1DIByi9
R9TFcsKaiBK2KjBVg/eb4YCch5FfDYC+kANjw0+9aYs+02nKvpJYkZhODAumRT6F
Df7ftdy9lFEfZoOnG/Ehebay2i3zvhc9gyfiI3XSuvFuFlg/sqwQQ9qh1BRYLian
EmV4V4SBz4DG6MU0sXA/83TGMleev8qH/+itD0meS4YF7zbFi599q0cAihNqn0Tp
hzxUH0PY89R7hXcZKgFGxq0I6/O/7zrbQNnA3BarCM9RXGH04DYpw9R1/kjTlMP3
JmlkCSiuS7/sj7n6B0/pQmMn2k6G7Q==
=iTaj
-----END PGP SIGNATURE-----
Merge tag 'regmap-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is a relatively busy release, though it's mostly cleanup work. We
did add some new hooks for regmap-irq to support some driver work,
that should also come in as part of a shared branch with the relevant
driver work in the GPIO subsystem"
* tag 'regmap-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: clean up kernel-doc comments
regcache: Validate cache_only state in regcache_sync_region()
regcache: Warn if regcache_sync() is called in cache_only mode
regcache: Mark cache dirty if selector register rewrite fails
regcache: Preserve cache synchronization errors in regcache_sync()
regmap: maple: Workaround for another false-positive compiler warning
regcache: Make ->exit() callback return void
GPIO core:
- extend the gpio-regmap abstraction layer with more features allowing users
to override configuration setting, translate register values and masks and
enable/disable interrupts
- extend GPIO kunit tests with suites verifying probe ordering by software
node devlink support and software node hogs
- shrink GPIO kunit initialization code
- coding style updates (remove commas from sentinels where applicable)
- with all users now converted treewide to using real firmware node links for
software node GPIO lookup: remove the deprecated label-matching mechanism
from from GPIO core
- drop redundant return value check of nonseekable_open() in gpiolib-cdev
- use IRQ trigger helpers where applicable
Driver updates:
- refactor error paths and logging in gpio-nomadik
- use more modern interfaces for getting resources in gpio-rockchip,
gpio-bt8xx and gpio-pca9570
- add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
- drop unused FILONOFF macro from gpio-rcar
- extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
- only enable the gpio-rtd driver by default with ARCH_REALTEK=y to avoid
bloating the build
- refactor coding style in several drivers
- use correct endianess translation in gpio-pcf85x
- add wake-up interrupt support to gpio-mvebu
- apply initial value in direction output setter in gpio-by-pinctrl
Misc:
- replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h which now
exports all the deprecated APIs
- select GPIOLIB_LEGACY in Kconfig where required treewide
- use software nodes for gpio-keys in MFD drivers
Devicetree bindings:
- describe the realtek rtd1625 GPIO controller
- document new models for gpio-pca95xx and gpio-cadence
- document new property in gpio-rockchip
-----BEGIN PGP SIGNATURE-----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=rUDt
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"GPIO core:
- extend the gpio-regmap abstraction layer with more features
allowing users to override configuration setting, translate
register values and masks and enable/disable interrupts
- extend GPIO kunit tests with suites verifying probe ordering by
software node devlink support and software node hogs
- shrink GPIO kunit initialization code
- coding style updates (remove commas from sentinels where
applicable)
- with all users now converted treewide to using real firmware node
links for software node GPIO lookup: remove the deprecated
label-matching mechanism from from GPIO core
- drop redundant return value check of nonseekable_open() in
gpiolib-cdev
- use IRQ trigger helpers where applicable
Driver updates:
- refactor error paths and logging in gpio-nomadik
- use more modern interfaces for getting resources in gpio-rockchip,
gpio-bt8xx and gpio-pca9570
- add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
- drop unused FILONOFF macro from gpio-rcar
- extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
- only enable the gpio-rtd driver by default with ARCH_REALTEK=y to
avoid bloating the build
- refactor coding style in several drivers
- use correct endianess translation in gpio-pcf85x
- add wake-up interrupt support to gpio-mvebu
- apply initial value in direction output setter in gpio-by-pinctrl
Misc:
- replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h
which now exports all the deprecated APIs
- select GPIOLIB_LEGACY in Kconfig where required treewide
- use software nodes for gpio-keys in MFD drivers
Devicetree bindings:
- describe the realtek rtd1625 GPIO controller
- document new models for gpio-pca95xx and gpio-cadence
- document new property in gpio-rockchip"
* tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (61 commits)
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property
gpio: Use IRQ trigger mask helpers
gpio: allow COMPILE_TEST for IOPORT drivers
gpio: realtek: Add driver for Realtek DHC RTD1625 SoC
gpio: regmap: Add IRQ enable/disable helpers
gpio: regmap: Add set_config callback
gpio: regmap: Add value_xlate callback
gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback
gpio: regmap: Order kernel-doc descriptions with the actual appearance
gpio: regmap: Apply default resource callbacks for regmap IRQ chip
gpio: regmap: Provide default IRQ resource request and release callbacks
Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC"
gpib: gpio: replace linux/gpio.h inclusion
Input: matrix_keyboard - replace linux/gpio.h inclusion
phy: replace linux/gpio.h inclusions
pcmcia: replace linux/gpio.h inclusions
ASoC: replace linux/gpio.h inclusions
mfd: replace linux/gpio.h inclusions
sh: replace linux/gpio.h inclusions
...
Non-urgent fixes:
* Fix calculation of node_spanned_pages when running with kernelcore=mirror
* Properly handle failure to allocate per_cpu_nodestats in
free_area_init_core_hotplug()
* Fix deferred initialization of the memory map for configurations where
node's RAM end is not aligned on PAGES_PER_SECTION
Cleanups:
* Remove redundant pageblock_align() call in free_unused_memmap()
* Remove unnecessary invalid range checks in users of memblock iterators.
Some users of for_each_mem_range() and for_each_mem_pfn_range() verify
that start < end for each range. This is redundant because memblock
iterators guarantee to never return an invalid range
* Stop overlapping zones with kernelcore=mirror and align behaviour of
kernelcore=mirror with other variants of kernelcore=/movablecore=
* Remove redundant updates of numa_nodes_parsed mask in the callers of
numa_add_memblk(), the latter always updates the mask anyway
* Remove unnecessary initialization of pgdat->per_cpu_nodestats to NULL,
the variable is reset to the actual value a few lines below
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmp9lIIACgkQOQOGJssO
/ZEgNggAgzHeTtb+CK6s4mXlkIaoau/7I/nxmvl9/EwH4uNZrRSn7lKOp7FkTYk0
IvtrMj8XspA8vDMzkxAutVfgGFo7zItzpkIF8Y8r6vbP+fhZhieZ6NnxeyjEfYJJ
/r800vL+Q8ru0WUv5qsiBwlRC3RNoVQvO2zLsoBUbBqNluv9L+eDrs7pgcVbrkhy
r3rDHjnj2v9mqPZl+CTGifCWq0y40bhcw0dbRpn7165c2qwEMSwlan5ERuaZmja1
NJrWNiqYxD7mQ3DyDIc4C9jvZaHLkVkaAE6uRrTXb1rJFmyh/ghQ4YdTZ9GTcEVP
6AQk/eX3V3k5QUVngJBFqUq/kD2eIQ==
=vCS2
-----END PGP SIGNATURE-----
Merge tag 'memblock-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Non-urgent fixes:
- Fix calculation of node_spanned_pages when running
with 'kernelcore=mirror'
- Properly handle failure to allocate per_cpu_nodestats
in free_area_init_core_hotplug()
- Fix deferred initialization of the memory map for
configurations where node's RAM end is not aligned
on PAGES_PER_SECTION
Cleanups:
- Remove redundant pageblock_align() call in free_unused_memmap()
- Remove unnecessary invalid range checks in users of memblock
iterators. Some users of for_each_mem_range() and
for_each_mem_pfn_range() verify that start < end for each range.
This is redundant because memblock iterators guarantee to never
return an invalid range
- Stop overlapping zones with 'kernelcore=mirror' and align behaviour
of 'kernelcore=mirror' with other variants of kernelcore and
movablecore
- Remove redundant updates of numa_nodes_parsed mask in the callers
of numa_add_memblk(), the latter always updates the mask anyway
- Remove unnecessary initialization of pgdat->per_cpu_nodestats to
NULL, the variable is reset to the actual value a few lines below"
* tag 'memblock-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: (25 commits)
mm/mm_init: deferred_grow_zone(): fix out-of-range first_deferred_pfn
mm/mm_init: remove unnecessary initialization of pgdat->per_cpu_nodestats
mm/mm_init: remove redundant memset in free_area_init()
mm: numa_memblks: use numa_add_reserved_memblk() in numa_cleanup_meminfo()
arch_numa: remove redundant node_possible_map assignment
mm: numa_memblks: remove redundant numa_nodemask_from_meminfo()
LoongArch: remove redundant numa_nodes_parsed node_set()
arch_numa: remove redundant numa_nodes_parsed node_set()
x86/numa: remove redundant numa_nodes_parsed node_set()
of/numa: remove redundant numa_nodes_parsed node_set()
ACPI: NUMA: remove redundant numa_nodes_parsed node_set()
mm: numa_memblks: set numa_nodes_parsed in numa_add_memblk()
mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug
mm/mm_init: drop overlap_memmap_init()
mm/mm_init: don't overlap NORMAL and MOVABLE zones with kernelcore=mirror
mm/hugetlb: remove unnecessary empty range check in hugetlb_bootmem_set_nodes()
mm: remove unnecessary empty range check in early_calculate_totalpages()
powerpc64/kasan: Remove unreachable invalid range check in kasan_init_phys_region()
ARM: remove unreachable invalid range check in kasan_init()
riscv: remove unreachable invalid range check in kasan_init()
...
- Minor fixes and cleanups in assorted cpufreq drivers (Dan Carpenter,
Guru Das Srinagesh, Haoxiang Li, Karl Mehltretter, Sasha Finkelstein,
and Pan Chuang)
- Fix cpufreq table creation and bios_limits() callback in the Rust
bindings (Priya Bala Govindasamy)
- Add IPQ5210 support to qcom-nvmem driver (Varadarajan Narayanan)
- Adjust the .adjust_perf() cpufreq driver callback to allow the
maximum performance value to be passed to drivers and update the
intel_pstate driver to use it (Rafael Wysocki)
- Set policy->cur to the actual requested frequency in the intel_pstate
driver when the performance policy is used (Rafael Wysocki)
- Simplify HWP handling on Broadwell processors in intel_pstate (Rafael
Wysocki)
- Fix setting minimum P-state at init time in intel_pstate (Rafael
Wysocki)
- Consolidate frequency values computation in intel_pstate and clean up
code in that driver (Rafael Wysocki)
- Add missing kernel-doc descriptions for structure and union members
in the amd-pstate driver (David Vernet)
- Handle missing policy in dynamic EPP callbacks in the amd-pstate
driver (EDAMAMEX)
- Introduce EXPORT_SYMBOL_FOR_PSTATE_UT() to export amd-pstate driver
symbols to the amd-pstate-ut subdriver (K Prateek Nayak)
- Add dynamic EPP as an "energy_performance_preference" mode in
amd-pstate, remove the "amd_dynamic_epp" kernel command line option
and the "dynamic_epp" sysfs attribute, and update the dynamic_epp
documentation accordingly (K Prateek Nayak)
- Add unit tests for CPPC Performance Priority and the "dynamic" EPP
mode in the amd-pstate driver (K Prateek Nayak)
- Set min_limit_freq based on bios_min_perf in amd-pstate and remove
the defensive check for bios_min_perf from it (K Prateek Nayak)
- Fix EPP return type and handle errors in amd-pstate during
initialization, toggle auto_sel in active mode on shared memory
systems, and cache the firmware programmed EPP value (Marco Scardovi)
- Skip tests in amd-pstate-ut if the amd-pstate driver is not in active
use (Qianheng Peng)
- Replace sprintf() with sysfs_emit() in sysfs show in the cpufreq
schedutil governor and fix a self-contradictory comment in
sugov_iowait_apply() (Zhongqiu Han)
- Fix the usage example for the sampling_rate tunable of the ondemand
cpufreq governor in admin-guide (wangxiaodong)
- Avoid using deep idle states during initialization in the intel_idle
driver to work around device handling issues (Rafael Wysocki)
- Fix and refactor the ACPI processor driver code related to ACPI _LPI
support and add ACPI _LPI support to intel_idle based on that ACPI
processor driver update (Rafael Wysocki)
- Backup and restore governor for cpufreq sptests (Yiwei Lin)
- Remove unnecessary sudo from quick_shuffle() and remove unused local
variables from switch_show_governor() in cpufreq selftests (Jinseok
Kim)
- Rename the PM core module parameter prefix to "pm" and allow the PM
transition (DPM) watchdog to be disabled by default (Tzung-Bi Shih)
- Fix off-by-one in wakelocks number limit check in the system sleep
sysfs interface (Haowen Tu)
- Remove kernel-doc markings from helper descriptions in the core
hibernation code (Adi Nata)
- Use %pe to print error pointer values in the hibernation core (Ronan
Marchal)
- Fix memory leak in snapshot_write_next() error path (Malaya Kumar
Rout)
- Delay allocating and linking the next swap_map_page in the
hibernation image saving code until another image page actually
needs to be recorded (Haesung Kim)
- Fix cleanup ordering around scope-based pointers in OPP (Gregor
Herburger).
- Use clk_get_optional() for optional clocks in OPP (Praveen Talari).
- Stop setting runtime_error on runtime resume callback failures to
allow drivers to recover from resume issues (Praveen Talari)
- Handle PMU registration failure during probe in the intel_rapl_tpmi
driver (Sumeet Pawnikar)
- Avoid optional imports in intel_pstate_tracer unless they are really
needed (Yousef Alhouseen)
- Add generic CPPC performance display to the cpupower utility, build
and call CPPC information on non-AMD processors, make cpupower print
kernel and hardware frequency information, and add libm to cpupower
for generic CPPC view (Jeremy Linton)
- Remove conditional return with no effect from cpupower (Sang-Heon
Jeon)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmp+DXsSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO10Z4IAIYwM9RKwbwCqPMKGvWExIb+1kpEy1aw
wyFnYSiQd09XCt8/YjERFR9gB7CfGduisTxEOqOdCIpGX2rT9Me5xO5aR5Gz4FE3
bML7KyulS9tVyaEVBjFx1yDZxGTNooTQVTLIxBYbCVB1RrgiCGdLyC2okn79XHlk
olTZemq59Kn0B6t7BP7UQ0WCCCAs3RlbrQIZSrVh0HydoO0DHlJvttN2fc7bjeiM
Je/dSm14o+vjglkVpY1kbxzBHJOH7/XH5nqSQRoHoAZWdllWK4+iQtll63Un4A72
2KG0O5+nFrS3d166TEjDEInnEwR012Sod/8Gk72M0IZZhG/naqs5ekE=
=mn7E
-----END PGP SIGNATURE-----
Merge tag 'pm-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"As has been the case for quite some time, this set of changes is
dominated by cpufreq updates including intel-pstate and amd-pstate
driver updates, minor fixes and cleanups of other assorted cpufreq
drivers, schedutil governor updates, fixes of the Rust bindings, new
hardware support (IPQ5210 in qcom-nvmem), and some updates of self
tests related to cpufreq.
The second largest group of changes are cpuidle updates consisting of
intel_idle driver updates and ACPI processor idle driver updates, both
mostly related to ACPI _LPI support.
There are also updates related to system sleep, mostly in the
hibernation core code, two operating performance points (OPP) updates,
one runtime PM framework update, one power capping update, and some
tools updates including the addition of ACPI CPPC support to cpupower.
Specifics:
- Minor fixes and cleanups in assorted cpufreq drivers (Dan
Carpenter, Guru Das Srinagesh, Haoxiang Li, Karl Mehltretter, Sasha
Finkelstein, and Pan Chuang)
- Fix cpufreq table creation and bios_limits() callback in the Rust
bindings (Priya Bala Govindasamy)
- Add IPQ5210 support to qcom-nvmem driver (Varadarajan Narayanan)
- Adjust the .adjust_perf() cpufreq driver callback to allow the
maximum performance value to be passed to drivers and update the
intel_pstate driver to use it (Rafael Wysocki)
- Set policy->cur to the actual requested frequency in the
intel_pstate driver when the performance policy is used (Rafael
Wysocki)
- Simplify HWP handling on Broadwell processors in intel_pstate
(Rafael Wysocki)
- Fix setting minimum P-state at init time in intel_pstate (Rafael
Wysocki)
- Consolidate frequency values computation in intel_pstate and clean
up code in that driver (Rafael Wysocki)
- Add missing kernel-doc descriptions for structure and union members
in the amd-pstate driver (David Vernet)
- Handle missing policy in dynamic EPP callbacks in the amd-pstate
driver (EDAMAMEX)
- Introduce EXPORT_SYMBOL_FOR_PSTATE_UT() to export amd-pstate driver
symbols to the amd-pstate-ut subdriver (K Prateek Nayak)
- Add dynamic EPP as an "energy_performance_preference" mode in
amd-pstate, remove the "amd_dynamic_epp" kernel command line option
and the "dynamic_epp" sysfs attribute, and update the dynamic_epp
documentation accordingly (K Prateek Nayak)
- Add unit tests for CPPC Performance Priority and the "dynamic" EPP
mode in the amd-pstate driver (K Prateek Nayak)
- Set min_limit_freq based on bios_min_perf in amd-pstate and remove
the defensive check for bios_min_perf from it (K Prateek Nayak)
- Fix EPP return type and handle errors in amd-pstate during
initialization, toggle auto_sel in active mode on shared memory
systems, and cache the firmware programmed EPP value (Marco
Scardovi)
- Skip tests in amd-pstate-ut if the amd-pstate driver is not in
active use (Qianheng Peng)
- Replace sprintf() with sysfs_emit() in sysfs show in the cpufreq
schedutil governor and fix a self-contradictory comment in
sugov_iowait_apply() (Zhongqiu Han)
- Fix the usage example for the sampling_rate tunable of the ondemand
cpufreq governor in admin-guide (wangxiaodong)
- Avoid using deep idle states during initialization in the
intel_idle driver to work around device handling issues (Rafael
Wysocki)
- Fix and refactor the ACPI processor driver code related to ACPI
_LPI support and add ACPI _LPI support to intel_idle based on that
ACPI processor driver update (Rafael Wysocki)
- Backup and restore governor for cpufreq sptests (Yiwei Lin)
- Remove unnecessary sudo from quick_shuffle() and remove unused
local variables from switch_show_governor() in cpufreq selftests
(Jinseok Kim)
- Rename the PM core module parameter prefix to "pm" and allow the PM
transition (DPM) watchdog to be disabled by default (Tzung-Bi Shih)
- Fix off-by-one in wakelocks number limit check in the system sleep
sysfs interface (Haowen Tu)
- Remove kernel-doc markings from helper descriptions in the core
hibernation code (Adi Nata)
- Use %pe to print error pointer values in the hibernation core
(Ronan Marchal)
- Fix memory leak in snapshot_write_next() error path (Malaya Kumar
Rout)
- Delay allocating and linking the next swap_map_page in the
hibernation image saving code until another image page actually
needs to be recorded (Haesung Kim)
- Fix cleanup ordering around scope-based pointers in OPP (Gregor
Herburger).
- Use clk_get_optional() for optional clocks in OPP (Praveen Talari).
- Stop setting runtime_error on runtime resume callback failures to
allow drivers to recover from resume issues (Praveen Talari)
- Handle PMU registration failure during probe in the intel_rapl_tpmi
driver (Sumeet Pawnikar)
- Avoid optional imports in intel_pstate_tracer unless they are
really needed (Yousef Alhouseen)
- Add generic CPPC performance display to the cpupower utility, build
and call CPPC information on non-AMD processors, make cpupower
print kernel and hardware frequency information, and add libm to
cpupower for generic CPPC view (Jeremy Linton)
- Remove conditional return with no effect from cpupower (Sang-Heon
Jeon)"
* tag 'pm-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
cpufreq: imx6q: fix out-of-bounds write when probed more than once
cpufreq: imx6q: fix devres accumulation across driver rebind
rust: cpufreq: Fix temporary write in Registration::bios_limit_callback
rust: cpufreq: Add CPUFREQ_TABLE_END as last table entry in TableBuilder::to_table
opp: Use clk_get_optional() to avoid leaving opp_table->clk as an error pointer
intel_idle: Avoid using deep idle states during initialization
cpupower: remove conditional return with no effect
cpufreq: intel_pstate: Adjust policy->cur in active mode to policy
cpufreq/amd-pstate: Document missing kernel-doc members
cpufreq/amd-pstate-ut: Add unit test for CPPC Performance Priority
cpufreq/amd-pstate-ut: Add unit test for "dynamic" EPP mode
cpufreq/amd-pstate: Reduce the scope of exported symbols
Documentation/amd-pstate: Update dynamic_epp documentation with new behavior
cpufreq/amd-pstate: Remove "amd_dynamic_epp" cmdline and "dynamic_epp" sysfs
cpufreq/amd-pstate: Add dynamic EPP as an "energy_performance_preference" mode
cpufreq/amd-pstate: Extract platform profile to EPP conversion into a helper
cpufreq/amd-pstate: Remove the defensive check for bios_min_perf
cpufreq/amd-pstate: Set min_limit_freq based on bios_min_perf
powercap: intel_rapl_tpmi: Handle PMU registration failure during probe
PM: sleep: Allow disabling DPM watchdog by default
...
The users which rely on regmap IRQ to create the IRQ chip may also
want to have an additional tracking of the IRQ requests and releases.
Provide a callback for them.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpH1IMACgkQJNaLcl1U
h9BbqQf+Kbxx8fZTq9/B2We7wNK70hyrMB1hsnyKRGSgJXBEr+V/k5C5iG+vzFjB
syZLwk+Ghkk+FvtQbZsBrtkbY0kPyUz0xff+X6VyJO5ylFQs27RijTPwI1MheU+o
baSOhwRaAs8FFJdBEdC611STaxYVuJKc2Z+fKPQGp54VpD0anXjgTFTe0SP6IrnT
H7HtbQUIP3ZTtCLH2/Fq9ZZfeCmpOkeuvr5iMv/KrSI5uv6AkB8eCoTt1gnTSnNh
3XDkTlhT2EnoEEc2TCFi392rUcu+sv5sbld6PwaXlhJryLYz+95IXEWFYYwDL64c
3t0ElJvBRZIoOc9Ry589ElXxPbEQFQ==
=d+FT
-----END PGP SIGNATURE-----
Merge tag 'regmap-irq-reqrel' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into gpio/for-next
regmap-irq: Provide IRQ resource request and release callbacks
The users which rely on regmap IRQ to create the IRQ chip may also
want to have an additional tracking of the IRQ requests and releases.
Provide a callback for them.
Please consider pulling these changes from the signed vfs-7.3-rc1.kthread tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCan7RJQAKCRCRxhvAZXjc
ohHuAQCFeGhxqsb44KhuJaWXewiXbefr6eg31lXmxgSfg0DILAD/Tw/WmpiUbX5M
H+/jh6NmLKnQ/ADjlWFRy3R1K1Il3w4=
=jwPP
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.3-rc1.kthread' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull kthread vfs updates from Christian Brauner:
"This stops kernel threads from sharing filesystem state with
userspace. This work is about 3 cycles old and has been in -next
for about that time.
When the kernel boots init_task creates PID 1 and then kthreadd. From
that point every kthread and PID 1 share the same fs_struct. That is
why pivot_root() has to rewrite the fs_struct of all kthreads. The
rewriting exists so that kthreads can use init's filesystem state when
they want to. It also means userspace can move the ground out from
under the kernel.
PID 1 now gets a completely separate fs_struct. All kthreads are
anchored in a private SB_KERNMOUNT instance of nullfs that cannot be
mounted on and cannot be used to follow other mounts. Userspace init
can no longer affect kthread filesystem state and kthreads can no
longer affect userspace fs state without explicit opting in to that.
Path lookup from a kthread now fails by default. It makes it
deliberately hard to offload security sensitive operations into init's
filesystem state from a kthread.
Places that legitimately need to look something up there opt in
through the new scoped_with_init_fs() which temporarily overrides the
caller's fs_struct with init's. usermodehelpers remain the only kernel
tasks that genuinely share init's filesystem state, since they execute
random binaries in the root filesystem (excellent...).
The visible result is that /proc/2/root is a nullfs with an empty
mountinfo while /proc/1/root is the real root"
* tag 'vfs-7.3-rc1.kthread' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
initramfs_test: use test init/exit hooks to override init fs
fs: stop rewriting paths for PF_EXITING | PF_DUMPCORE
fs: stop rewriting kthread fs structs
fs: start all kthreads in nullfs
nullfs: make nullfs multi-instance
devtmpfs: create private mount namespace
fs: add umh argument to struct kernel_clone_args
fs: stop sharing fs_struct between init_task and pid 1
af_unix: use scoped_with_init_fs() for coredump socket lookup
initramfs: use scoped_with_init_fs() for rootfs unpacking
pnfs/blocklayout: use scoped_with_init_fs() for SCSI device lookup
ksmbd: use scoped_with_init_fs() for VFS path operations
ksmbd: use scoped_with_init_fs() for filesystem info path lookup
ksmbd: use scoped_with_init_fs() for share path resolution
fs: use scoped_with_init_fs() for kernel_read_file_from_path_initns()
coredump: use scoped_with_init_fs() for coredump path resolution
btrfs: use scoped_with_init_fs() for update_dev_time()
scsi: target: use scoped_with_init_fs() for APTPL metadata
scsi: target: use scoped_with_init_fs() for ALUA metadata
crypto: ccp: use scoped_with_init_fs() for SEV file access
...
regmap_sdw_mbq_poll_busy() decides whether to poll the Function Busy bit
by calling ctx->readable_reg(), which is a straight copy of
config->readable_reg. That callback is optional: regmap_readable() treats
a NULL ->readable_reg as "every register is readable", and drivers rely on
that. es9356 and tac5xx2-sdw both build an MBQ regmap without one.
Since commit ca1b11b36d ("regmap: sdw-mbq: Allow defers on undeferrable
controls") the poll runs on every -ENODATA, not only for Controls the
driver marked deferrable, so any of those devices answering
COMMAND_IGNORED takes the kernel through a NULL function pointer.
Treat a missing callback the way the rest of regmap does and poll.
Fixes: 5bc493bf0c ("regmap: sdw-mbq: Add support for SDCA deferred controls")
Signed-off-by: Andrey Golovko <andrey.golovko@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260811184500.5312-1-andrey.golovko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge updates related to system sleep handling and runtime PM, a power
capping update, and power management tools updates for 7.3-rc1:
- Rename the PM core module parameter prefix to "pm" and allow the PM
transition (DPM) watchdog to be disabled by default (Tzung-Bi Shih)
- Fix off-by-one in wakelocks number limit check in the system sleep
sysfs interface (Haowen Tu)
- Remove kernel-doc markings from helper descriptions in the core
hibernation code (Adi Nata)
- Use %pe to print error pointer values in the hibernation core (Ronan
Marchal)
- Fix memory leak in snapshot_write_next() error path (Malaya Kumar
Rout)
- Delay allocating and linking the next swap_map_page in the
hibernation image saving code until another image page actually
needs to be recorded (Haesung Kim)
- Stop setting runtime_error on runtime resume callback failures to
allow drivers to recover from resume issues (Praveen Talari)
- Handle PMU registration failure during probe in the intel_rapl_tpmi
driver (Sumeet Pawnikar)
- Avoid optional imports in intel_pstate_tracer unless they are really
needed (Yousef Alhouseen)
- Add generic CPPC performance display to the cpupower utility, build
and call CPPC information on non-AMD processors, make cpupower print
kernel and hardware frequency information, and add libm to cpupower
for generic CPPC view (Jeremy Linton)
- Remove conditional return with no effect from cpupower (Sang-Heon
Jeon)
* pm-sleep:
PM: sleep: Allow disabling DPM watchdog by default
PM: sleep: Rename module parameters prefix to "pm"
PM: hibernate: swap: defer linking the next map page
PM: hibernate: Fix memory leak in snapshot_write_next() error path
PM: hibernate: Use %pe to print error pointer values
PM: hibernate: Remove kernel-doc markings from helper descriptions
PM: sleep: Fix off-by-one in wakelocks number limit check
* pm-runtime:
PM: runtime: Only set runtime_error on suspend callback failures
* pm-powercap:
powercap: intel_rapl_tpmi: Handle PMU registration failure during probe
* pm-tools:
cpupower: remove conditional return with no effect
tools/power: intel_pstate_tracer: avoid optional imports for help
cpupower: Add libm to cpupower for generic CPPC view
cpupower: Print kernel and hardware frequency information
cpupower: Build and call CPPC information on non-AMD processors
cpupower: Add generic CPPC performance display
fw_load_sysfs_fallback() calls device_add() before adding the fw_priv to
pending_fw_head. device_add() publishes the fallback loading interface, so
a userspace helper which discovers the device by scanning sysfs can write 0
to the loading attribute and complete the request before it is queued as
pending.
In that interleaving firmware_loading_store() calls fw_state_done() while
pending_list still points to itself, so it cannot remove an entry from
pending_fw_head. The subsequent unconditional list_add() then queues an
already-completed fw_priv. Once the request is released, pending_fw_head
can retain a pointer to freed memory and the next fallback request can
fault while validating the list.
Only in-flight fallback requests need suspend or reboot abort handling. If
the request is already DONE after device_add(), return success from the
fallback path without sending another uevent, waiting again, or queueing it
as pending. This preserves the invariant that pending_fw_head contains only
active fallback requests.
Fixes: 75d95e2e39 ("firmware_loader: fix use-after-free in firmware_fallback_sysfs")
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://patch.msgid.link/20260716081601.1674470-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
regcache_lookup_reg() bsearch()es the reg_defaults array, which requires
it to be sorted by ascending register address. Entries following a
descending step are never found, so regcache_reg_needs_sync() reports
that they need a sync and they are written to the device on every
regcache_sync() even when they were never touched.
Detect the misordering while reg_defaults is validated against the
register stride and sort the local copy. The check needs no new loop
and sort() only runs for the affected drivers, which are also warned
about.
Note that sort() is not stable, so for arrays with duplicated register
addresses it remains unspecified which entry is found.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260805132250.2637-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we look up registers in the defaults table we use a binary search,
and we have a regcache_sort_defaults() API to help drivers that constuct
their defaults tables on the fly. Unfortunately the lookup and the sort
don't use the same comparison function, and to make matters worse the
comparison function used during lookups is written for signed register
numbers rather than the unsigned ones we actually have so can produce
suprising results when some of the addresses have the top bit set.
Standardise on the more explicitly coded function to ensure consistent
results.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260805-regmap-regcache-sort-v1-1-162186aad8b9@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce the "dpm_watchdog_enabled" module parameter to allow the DPM
watchdog to be enabled or disabled at boot time and runtime.
Additionally, introduce the CONFIG_DPM_WATCHDOG_ENABLED Kconfig option
to set the default value of the module parameter at compile time.
The primary motivation for this configurability resolves around Android
GKI (Generic Kernel Image). We want to enable CONFIG_DPM_WATCHDOG in
the GKI so the feature is available. However, because the GKI is shared
across many different devices, we don't want to inadvertently affect
devices that are unaware of this feature. This provides a way to
compile it in, but keep it disabled by default for those devices via the
kernel command line or module parameters.
To maintain backward compatibility, CONFIG_DPM_WATCHDOG_ENABLED relies
on `default y`. Previously, the DPM watchdog was always active if
CONFIG_DPM_WATCHDOG was set. Defaulting this new option to 'y' ensures
that the behavior remains unchanged for existing users and defconfigs
when they upgrade.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260720030821.2780257-3-tzungbi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, the module parameters defined in drivers/base/power/main.c
use the default prefix "main" (derived from the filename). The prefix
is too generic and non-descriptive.
Redefine MODULE_PARAM_PREFIX to "pm." to group the module
parameters under the namespace instead. This makes the parameters more
descriptive.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260720030821.2780257-2-tzungbi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add test cases for fwnode_for_each_child_node() API.
Test command:
$ ./tools/testing/kunit/kunit.py run property-entry
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260721105448.2109894-3-xu.yang_2@oss.nxp.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Calling regcache_sync() while cache_only is enabled is invalid API
usage, since writes are intentionally kept in the cache and cannot
be synchronized to hardware.
Document that callers must disable cache_only before calling
regcache_sync(), and reject incorrect usage with a WARN_ON() and
-EINVAL.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260720033238.52479-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With no drivers that manually assign software nodes to platform devices
created with platform_device_alloc(), we can now unify the release path
and remove platform_device_release_full().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260716-swnode-remove-on-dev-unreg-v8-4-5c2b8cc38c28@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Calling platform_device_set_fwnode() (and by extension:
platform_device_set_of_node()) of platform_device_set_of_node_from_dev()
for a dynamically allocated platform device whose primary firmware node
is already assigned and is a software node leads to a resource leak as we
never perform the corresponding call to software_node_notify_remove(). As
there are currently no users for this special case - just disallow it and
warn loudly if it ever happens.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260716-swnode-remove-on-dev-unreg-v8-1-5c2b8cc38c28@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Commit d72277b6c3 ("dma-buf: nuke DMA_FENCE_TRACE macros v2") in
v5.16 removed all users of DMA_FENCE_TRACE on the premise that the
Kconfig symbol did not exist. Apparently one failed to notice the
symbol did exist since almost five years before: it was renamed from
FENCE_TRACE to DMA_FENCE_TRACE in commit f54d186700 ("dma-buf:
Rename struct fence to dma_fence") in v4.10.
Time passed by, so remove the Kconfig symbol, as no one seems to have
missed the functionality.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/16fb40ded203d1e2b72f4eeecad3fd0c0d23ad6f.1781863296.git.geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
soc_bus_register() registers the SoC bus before registering a deferred
early SoC device. If soc_device_register() fails in that path, the
function returns the error directly and leaves the bus registered.
Store the returned SoC device pointer explicitly so the success and
error cases are handled separately. On failure, clear soc_bus_registered
and unregister the bus before returning the error.
Fixes: 6e12db376b ("base: soc: Allow early registration of a single SoC device")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://patch.msgid.link/20260615180746.713540-1-dbgh9129@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
numa_init() clears numa_nodes_parsed, node_possible_map and
node_online_map, then calls numa_memblks_init(), which clears the same
nodemasks. Nothing uses them in between.
These clears have been redundant since commit 767507654c ("arch_numa:
switch over to numa_memblks") made numa_init() use numa_memblks_init().
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260617163919.2544899-1-ekffu200098@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
attribute_container_add_class_device() first calls device_add() and then
creates the container attributes. If attribute_container_add_attrs() fails,
the helper returns the error with the class device still registered.
Callers use an error from this helper as a failed add and do not call
device_del() on that path. Undo the successful device_add() before
returning the attribute creation error.
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://patch.msgid.link/20260608172717.88657-1-dbgh9129@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If transport_add_class_device() gets an error from sysfs_create_group() when
creating the encryption group, it does not remove the statistics group in
the error path. Adjust the error path to do this properly.
v2: Only remove statistics group if tcont->statistics is non-NULL
Fixes: bd2bc52869 ("scsi: scsi_transport_fc: Introduce encryption group")
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260713173318.3060047-1-emilne@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In a couple of functions code can be made cleaner with help of
__free() macro. Refactor these to use RAII approach.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260611203537.1786399-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When iterate over children of a fwnode that has a secondary fwnode,
fwnode_get_next_child_node() can enter an infinite loop if the secondary
fwnode has more than one child.
Parent Child
(Primary fwnode) FWa: {FWa1, FWa2, FWa3}
(Secondary fwnode) FWb: {FWb1, FWb2}
In this case:
┌─> fwnode_get_next_child_node(FWa, FWa1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2
│
│ ...
│
│ fwnode_get_next_child_node(FWa, FWa3)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL
│ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1
│
│ fwnode_get_next_child_node(FWa, FWb1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1
└────┘
This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly
output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}.
The root cause is that when the current child (FWb1) belongs to the
secondary fwnode, calling get_next_child_node() on the parimary fwnode
incorrectly returns the first child (FWa1) again instead of NULL.
Fix this by dynamically checking the parent fwnode of the current child
before calling get_next_child_node(). This approach follows the pattern
established in commit b5b41ab6b0 ("device property: Check
fwnode->secondary in fwnode_graph_get_next_endpoint()").
Fixes: 2692c614f8 ("device property: Allow secondary lookup in fwnode_get_next_child_node()")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260611203537.1786399-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "Fixed dependency cycle(s) with ..." log is printed for each cycle
finding process. In particular, the same cycle may be parsed many times
during the proxy link setup. For example, if /soc/bus@4c000000/usb@4c100000
is a devicetree structure and node usb@4c100000 is in a cycle, then for
each device registration (soc, 4c000000.bus and 4c100000.usb),
fw_devlink_create_devlink() will find the same cycle and print a log.
The repeat logs are redundant and may cause confusion for the user. Move
the pr_debug() to __fwnode_link_cycle() and avoid printing the log if it
has already been printed.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260509111728.4123331-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This series extends software node support to use fw_devlink and adds test
coverage for the new behaviour.
This is a stable tag for other trees to merge.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaleyHAAKCRBFlHeO1qrK
LkGKAP9isPMqr2WJTbS8I65WDErXk3z8741AGELlUAkn3M3sUwD/X9tCZcFdTy8e
u7EyxBvnXb9TemwJFJbQmCZju/6yngg=
=e78c
-----END PGP SIGNATURE-----
Merge patch series "software node: provide support for fw_devlink"
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> says:
Currently only devicetree systems have their devices' probe ordered
against their suppliers automatically by fw_devlink. Software nodes have
lately been used extensively treewide to describe references to resource
suppliers: most notably, the GPIO subsystem uses it in many places. Now
that the conversion of "dangling" GPIO chip software nodes to using real
links is almost done, it makes sense to ensure no needless probe
deferrals by implementing the add_links() callback from the fwnode
interface.
This series extends software node support to use fw_devlink and adds test
coverage for the new behaviour.
Caveats: a supplier software node must be registered before the consumer
device is added, If the swnode is registered after the consumer was added,
add_links() has already run and set FWNODE_FLAG_LINKS_ADDED, so the late
supplier is missed. Graph/remote- endpoint ordering is left out for now as
well as there are no known users.
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-0-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add a kunit test suite for fw_devlink support for software nodes.
Most cases call add_links() directly and inspect the resulting fwnode
supplier/consumer lists: a single reference, multiple references, a
reference to an unregistered node, a "remote-endpoint" reference and a
reference array. The last case is end-to-end - it registers real consumer
and supplier platform devices together with their drivers, adds the
consumer first and checks that fw_devlink defers its probe until the
supplier has been bound.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: David Gow <david@davidgow.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-3-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Software nodes can be used to describe supplier-consumer relationships
between devices they represent using reference property entries. Unlike
for OF-nodes, driver core cannot yet use these references to create a
probe order that avoids needless probe deferrals on missing providers.
Implement software_node_add_links() modelled on of_fwnode_add_links().
For every DEV_PROP_REF property we resolve each referenced supplier and
create an fwnode link from the node to it. The driver core later promotes
these to device links and defers the consumer until the suppliers are
ready.
There's no allowlist like the one DT needs - devicetree phandles appear
in plenty of non-supplier contexts, but a software node only carries a
reference property when its author explicitly points at another node, so
we treat every reference as an intentional supplier dependency and link
all of them. Graph "remote-endpoint" references are skipped for now: they
go 2-ways between endpoint nodes and would create graph cycles without
the port-parent lifting DT does via get_con_dev(). References to
suppliers that aren't registered yet and self-references are ignored.
fw_devlink resolves the supplier device through fwnode->dev but the core
only records the owning device on the primary fwnode. When the software
node is a device's secondary fwnode, mirror the device pointer onto it in
software_node_notify() so the consumer can actually find the supplier
instead of deferring forever.
While at it: purge the fwnode links in software_node_release() now that
software nodes can own them.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-2-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
After a successful cache synchronization, regcache_sync() clears
cache_dirty. If rewriting a selector register later fails, the cache
and hardware become inconsistent while the cache still appears clean.
Update cache_dirty to reflect the cache and hardware state when
selector register rewriting fails.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260713050312.38729-3-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
regcache_sync() currently stores the return value from both cache
synchronization and selector register rewriting in the same variable.
As a result, a successful selector register rewrite can overwrite an
earlier cache synchronization error, causing regcache_sync() to return
success even though synchronization failed.
Track the two operations with separate return variables and preserve the
cache synchronization error. Errors from rewriting selector registers are
returned only if cache synchronization completed successfully.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260713050312.38729-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If an empty firmware file is supplied via CONFIG_EXTRA_FIRMWARE, the
build currently succeeds but creates an empty section. While the
firmware loader will not return such sections it is better to avoid
adding them in the first place.
Add a compile-time size check to the filechk_fwbin macro to abort the
build early if a 0-size firmware is encountered.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260426043041.649202-2-dmitry.torokhov@gmail.com
[ Use 'exit 1' to properly fail the build. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Currently, the builtin firmware loader allows 0-size firmware to be
returned successfully to drivers. This differs from all other loading
mechanisms (filesystem, sysfs fallback) which reject 0-byte files, and
forces drivers to add boilerplate size checks.
Modify firmware_request_builtin() to reject 0-size firmware. This will
also result in firmware loader falling back to other mechanisms if an
empty built-in firmware is present.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260426043041.649202-1-dmitry.torokhov@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The initcall_debug command line option is a useful tool while debugging
and optimizing the initialization of a new system, mainly because it
allows to see probe failures and deferrals without recompiling the
kernel (e.g., with CONFIG_DEBUG_DRIVER). However, matching a device
with the driver it is being probed with can become difficult, since
some devices use names that are not explicit, at least at a first sight
(e.g.: '1-0:1.0' or '1-0060').
Add the driver name alongside the device name, to allow for an immediate
match between the two.
Suggested-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Francesco Valla <francesco@valla.it>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260703-probe_driver-v2-1-b6060559f33b@valla.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using platform_device_register_full(), we currently only increase
the reference count of the OF node associated with a platform device. We
symmetrically decrease it in platform_device_release(). With all users in
tree now converted to using provided platform device helpers for
assigning OF and firmware nodes, we can now switch to counting references
of all kinds of firmware nodes.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-20-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Users of platform_device_alloc() + platform_device_add() must not modify
certain fields of the dynamically created platform device object. Update
the kernel doc to say which fields are affected and which functions to
use.
Suggested-by: Manuel Ebner <manuelebner@mailbox.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-5-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide a platform-specific variant of device_set_of_node_from_dev(). In
addition to bumping the reference count of the OF node being assigned,
it also assigns the fwnode of the platform device.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-4-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide a helper function encapsulating the logic of assigning firmware
nodes to platform devices created with platform_device_alloc(). Make the
kerneldoc state that this is the proper interface for assigning firmware
nodes to dynamically allocated platform devices. This will allow us to
switch to counting the references of the device's firmware nodes in the
future, not only the OF nodes.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-3-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Encapsulate the reference counting logic for OF nodes assigned to
platform devices created with platform_device_alloc() in a helper
function. Make the kerneldoc state that this is the proper interface for
assigning OF nodes to dynamically allocated platform devices. This will
allow us to switch to counting the references of the device's firmware
nodes, not only the OF nodes.
Reviewed-by: Manuel Ebner <manuelebner@mailbox.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-2-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a runtime resume callback returns an error, rpm_callback() sets
power.runtime_error on the device. This causes all subsequent calls to
rpm_resume() to return -EINVAL immediately at the top of the function
without invoking the callback again, making the failure permanent until
runtime PM is explicitly re-initialized.
Unlike suspend failures, resume failures should be retryable. If a
device's resume callback fails, there is no reason to permanently block
future resume attempts on that device and all of its consumers.
Fix this by moving the power.runtime_error assignment out of the generic
rpm_callback() and into rpm_suspend() at its fail label, where suspend
callback failures are handled. Resume callback failures now return the
error to the caller but leave power.runtime_error clear, allowing the
next resume attempt to invoke the callback normally.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-fix_sticky_-einval_after_pm_runtime_api_failure-v3-1-92feb5a7b926@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The users which rely on regmap IRQ to create the IRQ chip may also
want to have an additional tracking of the IRQ requests and releases.
Provide a callback for them.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpH1IMACgkQJNaLcl1U
h9BbqQf+Kbxx8fZTq9/B2We7wNK70hyrMB1hsnyKRGSgJXBEr+V/k5C5iG+vzFjB
syZLwk+Ghkk+FvtQbZsBrtkbY0kPyUz0xff+X6VyJO5ylFQs27RijTPwI1MheU+o
baSOhwRaAs8FFJdBEdC611STaxYVuJKc2Z+fKPQGp54VpD0anXjgTFTe0SP6IrnT
H7HtbQUIP3ZTtCLH2/Fq9ZZfeCmpOkeuvr5iMv/KrSI5uv6AkB8eCoTt1gnTSnNh
3XDkTlhT2EnoEEc2TCFi392rUcu+sv5sbld6PwaXlhJryLYz+95IXEWFYYwDL64c
3t0ElJvBRZIoOc9Ry589ElXxPbEQFQ==
=d+FT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpH1RQACgkQJNaLcl1U
h9AUJgf/SMsHAhkFaMozi5V6fSGjc5SjLfQPSEyX6gQOrLhQ8VKCHlstsZjEamp9
H0c/EF+4EMvQMO8FIDVSw/Na3fMuzrTDGJif6v2JQnNejT87tDG/GDH+3CRdLgYE
zCPbpjr6rIV85zjnC3yJ4ebybWNPZJ/IV+wpKhaNxU9/x1fVLE+z0TluYrpRNZrq
/uclUTV42OS7a0+oHq8n0Ysd1wALb5/aP6EQGZ/GTeLOPmIy2Qi93JcVkae7yzIL
cRrT3MD6iLiDSSp+nS4bVTiH6OHNfKSU79axxECxaKciYuAtuqgJi+/094qffdCe
7lcM6gtkLkIBvA2ZEcL1dFASBMFSVw==
=YuSX
-----END PGP SIGNATURE-----
regmap-irq: Provide IRQ resource request and release callbacks
The users which rely on regmap IRQ to create the IRQ chip may also
want to have an additional tracking of the IRQ requests and releases.
Provide a callback for them.
The users which rely on regmap IRQ to create the IRQ chip may also
want to have an additional tracking of the IRQ requests and releases.
Provide a callback for them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260702130903.1790633-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
numa_register_meminfo() sets node_possible_map to numa_nodes_parsed. The
later assignment in numa_register_nodes() is therefore redundant, so remove
it.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260703041329.2797584-9-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>