The MBM and MBA resctrl selftests run a benchmark during which
it takes measurements of read memory bandwidth via perf.
Code exists to support measurements of write memory bandwidth
but there exists no path with which this code can execute.
While code exists for write memory bandwidth measurement
there has not yet been a use case for it. Remove this unused code.
Rename relevant functions to include "read" so that it is clear
that it relates only to memory bandwidth reads, while renaming
the functions also add consistency by changing the "membw"
instances to more prevalent "mem_bw".
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The CMT, MBM, and MBA tests rely on a benchmark to generate
memory traffic. By default this is the "fill_buf" benchmark that
can be replaced via the "-b" command line argument.
The original intent of the "-b" command line parameter was
to replace the default "fill_buf" benchmark, but the implementation
also exposes an alternative use case where the "fill_buf" parameters
itself can be modified. One of the parameters to "fill_buf" is the
"operation" that can be either "read" or "write" and indicates
whether the "fill_buf" should use "read" or "write" operations on the
allocated buffer.
While replacing "fill_buf" default parameters is technically possible,
replacing the default "read" parameter with "write" is not supported
because the MBA and MBM tests only measure "read" operations. The
"read" operation is also most appropriate for the CMT test that aims
to use the benchmark to allocate into the cache.
Avoid any potential inconsistencies between test and measurement by
removing code for unsupported "write" operations to the buffer.
Ignore any attempt from user space to enable this unsupported test
configuration, instead always use read operations.
Keep the initialization of the, now unused, "fill_buf" parameters
to reserve these parameter positions since it has been exposed as an API.
Future parameter additions cannot use these parameter positions.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The CMT, MBM, and MBA tests rely on a benchmark that runs while
the test makes changes to needed configuration (for example memory
bandwidth allocation) and takes needed measurements. By default
the "fill_buf" benchmark is used and by default (via its
"once = false" setting) "fill_buf" is configured to run until
terminated after the test completes.
An unintended consequence of enabling the user to override the
benchmark also enables the user to change parameters to the
"fill_buf" benchmark. This enables the user to set "fill_buf" to
only cycle through the buffer once (by setting "once = true")
and thus breaking the CMT, MBA, and MBM tests that expect
workload/interference to be reflected by their measurements.
Prevent user space from changing the "once" parameter and ensure
that it is always false for the CMT, MBA, and MBM tests.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Within mba_setup() the programmed bandwidth delay value starts
at the maximum (100, or rather ALLOCATION_MAX) and progresses
towards ALLOCATION_MIN by decrementing with ALLOCATION_STEP.
The programmed bandwidth delay should never be negative, so
representing it with an unsigned int is most appropriate. This
may introduce confusion because of the "allocation > ALLOCATION_MAX"
check used to check wraparound of the subtraction.
Modify the mba_setup() flow to start at the minimum, ALLOCATION_MIN,
and incrementally, with ALLOCATION_STEP steps, adjust the
bandwidth delay value. This avoids wraparound while making the purpose
of "allocation > ALLOCATION_MAX" clear and eliminates the
need for the "allocation < ALLOCATION_MIN" check.
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Closes: https://lore.kernel.org/lkml/1903ac13-5c9c-ef8d-78e0-417ac34a971b@linux.intel.com/
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
resctrl selftests discover system properties via a variety of sysfs files.
The MBM and MBA tests need to discover the event and umask with which to
configure the performance event used to measure read memory bandwidth.
This is done by parsing the contents of
/sys/bus/event_source/devices/uncore_imc_<imc instance>/events/cas_count_read
Similarly, the resctrl selftests discover the cache size via
/sys/bus/cpu/devices/cpu<id>/cache/index<index>/size.
Take care to do bounds checking when using fscanf() to read the
contents of files into a string buffer because by default fscanf() assumes
arbitrarily long strings. If the file contains more bytes than the array
can accommodate then an overflow will occur.
Provide a maximum field width to the conversion specifier to protect
against array overflow. The maximum is one less than the array size because
string input stores a terminating null byte that is not covered by the
maximum field width.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The MBM and MBA tests need to discover the event and umask with which to
configure the performance event used to measure read memory bandwidth.
This is done by parsing the
/sys/bus/event_source/devices/uncore_imc_<imc instance>/events/cas_count_read
file for each iMC instance that contains the formatted
output: "event=<event>,umask=<umask>"
Parsing of cas_count_read contents is done by initializing an array of
MAX_TOKENS elements with tokens (deliminated by "=,") from this file.
Remove the unnecessary append of a delimiter to the string needing to be
parsed. Per the strtok() man page: "delimiter bytes at the start or end of
the string are ignored". This has no impact on the token placement within
the array.
After initialization, the actual event and umask is determined by
parsing the tokens directly following the "event" and "umask" tokens
respectively.
Iterating through the array up to index "i < MAX_TOKENS" but then
accessing index "i + 1" risks array overrun during the final iteration.
Avoid array overrun by ensuring that the index used within for
loop will always be valid.
Fixes: 1d3f08687d ("selftests/resctrl: Read memory bandwidth from perf IMC counter and from resctrl file system")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
alloc_buffer() allocates and initializes (with random data) a
buffer of requested size. The initialization starts from the beginning
of the allocated buffer and incrementally assigns sizeof(uint64_t) random
data to each cache line. The initialization uses the size of the
buffer to control the initialization flow, decrementing the amount of
buffer needing to be initialized after each iteration.
The size of the buffer is stored in an unsigned (size_t) variable s64
and the test "s64 > 0" is used to decide if initialization is complete.
The problem is that decrementing the buffer size may wrap around
if the buffer size is not divisible by "CL_SIZE / sizeof(uint64_t)"
resulting in the "s64 > 0" test being true and memory beyond the buffer
"initialized".
Use a signed value for the buffer size to support all buffer sizes.
Fixes: a2561b12fe ("selftests/resctrl: Add built in benchmark")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
By default the MBM test uses the "fill_buf" benchmark to keep reading
from a buffer with size DEFAULT_SPAN while measuring memory bandwidth.
User space can provide an alternate benchmark or amend the size of
the buffer "fill_buf" should use.
Analysis of the MBM measurements do not require that a buffer be used
and thus do not require knowing the size of the buffer if it was used
during testing. Even so, the buffer size is printed as informational
as part of the MBM test results. What is printed as buffer size is
hardcoded as DEFAULT_SPAN, even if the test relied on another benchmark
(that may or may not use a buffer) or if user space amended the buffer
size.
Ensure that accurate buffer size is printed when using "fill_buf"
benchmark and omit the buffer size information if another benchmark
is used.
Fixes: ecdbb911f2 ("selftests/resctrl: Add MBM test")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix following sparse warnings:
tools/testing/selftests/resctrl/resctrl_val.c:47:6: warning: symbol 'membw_initialize_perf_event_attr' was not declared. Should it be static?
tools/testing/selftests/resctrl/resctrl_val.c:64:6: warning: symbol 'membw_ioctl_perf_event_ioc_reset_enable' was not declared. Should it be
static?
tools/testing/selftests/resctrl/resctrl_val.c:70:6: warning: symbol 'membw_ioctl_perf_event_ioc_disable' was not declared. Should it be static?
tools/testing/selftests/resctrl/resctrl_val.c:81:6: warning: symbol 'get_event_and_umask' was not declared. Should it be static?
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The test is motivated by the following observation:
Raise a signal, jump to signal handler. The ucontext_t structure dumped
by kernel to userspace has a uc_sigmask field having the mask of blocked
signals. If you run a fresh minimalistic program doing this, this field
is empty, even if you block some signals while registering the handler
with sigaction().
Here is what the man-pages have to say:
sigaction(2): "sa_mask specifies a mask of signals which should be blocked
(i.e., added to the signal mask of the thread in which the signal handler
is invoked) during execution of the signal handler. In addition, the
signal which triggered the handler will be blocked, unless the SA_NODEFER
flag is used."
signal(7): Under "Execution of signal handlers", (1.3) implies:
"The thread's current signal mask is accessible via the ucontext_t
object that is pointed to by the third argument of the signal handler."
But, (1.4) states:
"Any signals specified in act->sa_mask when registering the handler with
sigprocmask(2) are added to the thread's signal mask. The signal being
delivered is also added to the signal mask, unless SA_NODEFER was
specified when registering the handler. These signals are thus blocked
while the handler executes."
There clearly is no distinction being made in the man pages between
"Thread's signal mask" and ucontext_t; this logically should imply
that a signal blocked by populating struct sigaction should be visible
in ucontext_t.
Here is what the kernel code does (for Aarch64):
do_signal() -> handle_signal() -> sigmask_to_save(), which returns
¤t->blocked, is passed to setup_rt_frame() -> setup_sigframe() ->
__copy_to_user(). Hence, ¤t->blocked is copied to ucontext_t
exposed to userspace. Returning back to handle_signal(),
signal_setup_done() -> signal_delivered() -> sigorsets() and
set_current_blocked() are responsible for using information from
struct ksignal ksig, which was populated through the sigaction()
system call in kernel/signal.c:
copy_from_user(&new_sa.sa, act, sizeof(new_sa.sa)),
to update ¤t->blocked; hence, the set of blocked signals for the
current thread is updated AFTER the kernel dumps ucontext_t to
userspace.
Assuming that the above is indeed the intended behaviour, because it
semantically makes sense, since the signals blocked using sigaction()
remain blocked only till the execution of the handler, and not in the
context present before jumping to the handler (but nothing can be
confirmed from the man-pages), this patch introduces a test for
mangling with uc_sigmask.
The test asserts the relation between blocked signal, delivered signal,
and ucontext. The ucontext is mangled with, by adding a signal mask to
it; on return from the handler, the thread must block the corresponding
signal.
In the test description, I have also described signal delivery and blockage,
for ease of understanding what the test does.
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Rename sigaltstack to generic signal directory, to allow adding more
signal tests in the future.
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In alarm_wkalm_set and alarm_wkalm_set_minute test, they use different
ioctl (RTC_ALM_SET/RTC_WKALM_SET) for alarm feature detection. They will
skip testing if RTC_ALM_SET/RTC_WKALM_SET ioctl returns an EINVAL error
code. This design may miss detecting real problems when the
efi.set_wakeup_time() return errors and then RTC_ALM_SET/RTC_WKALM_SET
ioctl returns an EINVAL error code with RTC_FEATURE_ALARM enabled.
In order to make rtctest more explicit and robust, we propose to use
RTC_PARAM_GET ioctl interface to check rtc alarm feature state before
running alarm related tests. If the kernel does not support RTC_PARAM_GET
ioctl interface, we will fallback to check the error number of
(RTC_ALM_SET/RTC_WKALM_SET) ioctl call for alarm feature detection.
Requires commit 101ca8d059 ("rtc: efi: Enable SET/GET WAKEUP services
as optional")
Reviewed-by: Koba Ko <kobak@nvidia.com>
Reviewed-by: Matthew R. Ochs <mochs@nvidia.com>
Signed-off-by: Joseph Jang <jjang@nvidia.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
timers tests defines CLOCKIDs locally. Remove all local CLOCKIDs except
CLOCK_HWSPECIFIC and use defines from time.h header file.
CLOCK_HWSPECIFIC and CLOCK_SGI_CYCLE are the same and CLOCK_SGI_CYCLE
is deprecated,
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
improve timer_create failure message with strerror() function
to give more information to the user.
Signed-off-by: Gianfranco Trad <gianf.trad@gmail.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove local NSEC_PER_SEC and USEC_PER_SEC defines. Pick them up from
include/vdso/time64.h. This requires -I $(top_srcdir) to the timers
Makefile to include the include/vdso/time64.h.
posix_timers test names the defines NSECS_PER_SEC and USECS_PER_SEC.
Change posix_timers test references to the defines to match the
defines in the header file.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This kselftest update for Linux 6.12-rc3 consists of several fixes
for build, run-time errors, and reporting errors:
-- ftrace: regression test for a kernel crash when running function graph
tracing and then enabling function profiler.
-- rseq: fix for mm_cid test failure.
-- vDSO:
- fixes to reporting skip and other error conditions.
- changes unconditionally build chacha and getrandom tests on
all architectures to make it easier for them to run in CIs.
- build error when sched.h to bring in CLONE_NEWTIME define.
-----BEGIN PGP SIGNATURE-----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=1etd
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes for build, run-time errors, and reporting errors:
- ftrace: regression test for a kernel crash when running function
graph tracing and then enabling function profiler.
- rseq: fix for mm_cid test failure.
- vDSO:
- fixes to reporting skip and other error conditions
- changes unconditionally build chacha and getrandom tests on all
architectures to make it easier for them to run in CIs
- build error when sched.h to bring in CLONE_NEWTIME define"
* tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
ftrace/selftest: Test combination of function_graph tracer and function profiler
selftests/rseq: Fix mm_cid test failure
selftests: vDSO: Explicitly include sched.h
selftests: vDSO: improve getrandom and chacha error messages
selftests: vDSO: unconditionally build getrandom test
selftests: vDSO: unconditionally build chacha test
Masami reported a bug when running function graph tracing then the
function profiler. The following commands would cause a kernel crash:
# cd /sys/kernel/tracing/
# echo function_graph > current_tracer
# echo 1 > function_profile_enabled
In that order. Create a test to test this two to make sure this does not
come back as a regression.
Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2
Link: https://lore.kernel.org/all/20241010165235.35122877@gandalf.local.home/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Current release - regressions:
- dsa: sja1105: fix reception from VLAN-unaware bridges
- Revert "net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled"
- eth: fec: don't save PTP state if PTP is unsupported
Current release - new code bugs:
- smc: fix lack of icsk_syn_mss with IPPROTO_SMC, prevent null-deref
- eth: airoha: update Tx CPU DMA ring idx at the end of xmit loop
- phy: aquantia: AQR115c fix up PMA capabilities
Previous releases - regressions:
- tcp: 3 fixes for retrans_stamp and undo logic
Previous releases - always broken:
- net: do not delay dst_entries_add() in dst_release()
- netfilter: restrict xtables extensions to families that are safe,
syzbot found a way to combine ebtables with extensions that are
never used by userspace tools
- sctp: ensure sk_state is set to CLOSED if hashing fails in
sctp_listen_start
- mptcp: handle consistently DSS corruption, and prevent corruption
due to large pmtu xmit
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=MK6g
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- dsa: sja1105: fix reception from VLAN-unaware bridges
- Revert "net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is
enabled"
- eth: fec: don't save PTP state if PTP is unsupported
Current release - new code bugs:
- smc: fix lack of icsk_syn_mss with IPPROTO_SMC, prevent null-deref
- eth: airoha: update Tx CPU DMA ring idx at the end of xmit loop
- phy: aquantia: AQR115c fix up PMA capabilities
Previous releases - regressions:
- tcp: 3 fixes for retrans_stamp and undo logic
Previous releases - always broken:
- net: do not delay dst_entries_add() in dst_release()
- netfilter: restrict xtables extensions to families that are safe,
syzbot found a way to combine ebtables with extensions that are
never used by userspace tools
- sctp: ensure sk_state is set to CLOSED if hashing fails in
sctp_listen_start
- mptcp: handle consistently DSS corruption, and prevent corruption
due to large pmtu xmit"
* tag 'net-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
MAINTAINERS: Add headers and mailing list to UDP section
MAINTAINERS: consistently exclude wireless files from NETWORKING [GENERAL]
slip: make slhc_remember() more robust against malicious packets
net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC
ppp: fix ppp_async_encode() illegal access
docs: netdev: document guidance on cleanup patches
phonet: Handle error of rtnl_register_module().
mpls: Handle error of rtnl_register_module().
mctp: Handle error of rtnl_register_module().
bridge: Handle error of rtnl_register_module().
vxlan: Handle error of rtnl_register_module().
rtnetlink: Add bulk registration helpers for rtnetlink message handlers.
net: do not delay dst_entries_add() in dst_release()
mptcp: pm: do not remove closing subflows
mptcp: fallback when MPTCP opts are dropped after 1st data
tcp: fix mptcp DSS corruption due to large pmtu xmit
mptcp: handle consistently DSS corruption
net: netconsole: fix wrong warning
net: dsa: refuse cross-chip mirroring operations
net: fec: don't save PTP state if PTP is unsupported
...
meta iifname veth0 ip daddr ... fib daddr oif
... is expected to return "dummy0" interface which is part of same vrf
as veth0.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The hmm2 double_map test was failing due to an incorrect buffer->mirror
size. The buffer->mirror size was 6, while buffer->ptr size was 6 *
PAGE_SIZE. The test failed because the kernel's copy_to_user function was
attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the
size of buffer->mirror was incorrect, copy_to_user failed.
This patch corrects the buffer->mirror size to 6 * PAGE_SIZE.
Test Result without this patch
==============================
# RUN hmm2.hmm2_device_private.double_map ...
# hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0)
# double_map: Test terminated by assertion
# FAIL hmm2.hmm2_device_private.double_map
not ok 53 hmm2.hmm2_device_private.double_map
Test Result with this patch
===========================
# RUN hmm2.hmm2_device_private.double_map ...
# OK hmm2.hmm2_device_private.double_map
ok 53 hmm2.hmm2_device_private.double_map
Link: https://lkml.kernel.org/r/20240927050752.51066-1-donettom@linux.ibm.com
Fixes: fee9f6d1b8 ("mm/hmm/test: add selftests for HMM")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The previous commit introduced the use of CLONE_NEWTIME without including
<sched.h> which contains its definition.
Add an explicit include of <sched.h> to ensure that CLONE_NEWTIME
is correctly defined before it is used.
Fixes: 2aec90036d ("selftests: vDSO: ensure vgetrandom works in a time namespace")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Improve the error and skip condition messages to let the developer know
precisely where a test has failed. Also make better use of the ksft api
for this.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Rather than building on supported archs, build on all archs, and then
use the presence of the symbol in the vDSO to either skip the test or
move forward with it.
Note that this means that this test no longer checks whether the symbol
was correctly added to the kernel. But hopefully this will be clear
enough to developers and we'll cross our fingers that symbols aren't
removed by accident and not caught after this change.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Rather than using symlinks to find the vgetrandom-chacha.S file for each
arch, store this in a file that uses the compiler to determine
architecture, and then make use of weak symbols to skip the test on
architectures that don't provide the code.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Starting with 6.12 commit 85585b4bc8 ("selftests: add ncdevmem, netcat
for devmem TCP") kselftest-all creates additional outputs that
kselftest-clean does not cleanup:
$ make defconfig
$ make kselftest-all
$ make kselftest-clean
$ git clean -ndxf | grep tools/net
Would remove tools/net/ynl/lib/__pycache__/
Would remove tools/net/ynl/lib/ynl.a
Would remove tools/net/ynl/lib/ynl.d
Would remove tools/net/ynl/lib/ynl.o
Make kselftest-clean remove the newly added net/ynl outputs.
Fixes: 85585b4bc8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20241005215600.852260-1-gthelen@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The generated include.sh should be ignored by git. Create a new
gitignore and add the file to the list.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-3-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The include.sh file is generated when building the net/rds selftests,
but there is no rule to delete it with the clean target. Add the file to
EXTRA_CLEAN in order to remove it when required.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-2-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
* Make sure that the host's vector length is at capped by a value
common to all CPUs
* Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
* Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
* Fix compilation with KVM_INTEL=KVM_AMD=n
* Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
* Fix compilation on non-x86 architectures
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcCRMgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNIgf/T80+VxFy7eP1yTkZy9nd3UjSsAeT
fWvYMyN2isOTWTVbl3ckjMZc4i7L/nOngxfkLzI3OfFUO8TI8cw11hNFn85m+WKM
95DVgEaqz1kuJg25VjSj9AySvPFDNec8bV37C2vk2jF4YsGo6qBugSSjktZUgGiW
ozsdV39lcVcLf+x8/52Vc2eb736nrrYg8QaFP0tEQs9MHuYob/XBw3Zx42dJoZYl
tCjGP5oW7EvUdRD48GkgXP9DWA12QmDxNOHEmUdxWamsK88YQXFyWwb7uwV5x+hd
mO3bJaYInkJsh3D2e5QARswQb+D5HMVYFwvEkxQF/wvmcMosRVz4vv65Sw==
=P4uw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
-----BEGIN PGP SIGNATURE-----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=Rtrz
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
This kselftest fixes update for Linux 6.12-rc2 consists of fixes
to build warnings, install scripts, run-time error path, and
git status cleanups to tests:
-- devices/probe: fix for Python3 regex string syntax warnings
-- clone3: removing unused macro from clone3_cap_checkpoint_restore()
-- vDSO: fix to align getrandom states to cache line
-- core and exec: add missing executables to .gitignore files
-- rtc: change to skip test if /dev/rtc0 can't be accessed
-- timers/posix: fix warn_unused_result result in __fatal_error()
-- breakpoints: fix to detect suspend successful condition correctly
-- hid: fix to install required dependencies to run the test
-----BEGIN PGP SIGNATURE-----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=AqIe
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings, install scripts, run-time error path, and git
status cleanups to tests:
- devices/probe: fix for Python3 regex string syntax warnings
- clone3: removing unused macro from clone3_cap_checkpoint_restore()
- vDSO: fix to align getrandom states to cache line
- core and exec: add missing executables to .gitignore files
- rtc: change to skip test if /dev/rtc0 can't be accessed
- timers/posix: fix warn_unused_result result in __fatal_error()
- breakpoints: fix to detect suspend successful condition correctly
- hid: fix to install required dependencies to run the test"
* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoints: use remaining time to check if suspend succeed
kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
selftest: hid: add missing run-hid-tools-tests.sh
selftests: vDSO: align getrandom states to cache line
selftests: exec: update gitignore for load_address
selftests: core: add unshare_test to gitignore
clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
selftest: rtc: Check if could access /dev/rtc0 before testing
Currently, the second bridge command overwrites the first one.
Fix this by adding this VID to the interface behind $swp2.
The one_bridge_two_pvids() test intends to check that there is no
leakage of traffic between bridge ports which have a single VLAN - the
PVID VLAN.
Because of a typo, port $swp1 is configured with a PVID twice (second
command overwrites first), and $swp2 isn't configured at all (and since
the bridge vlan_default_pvid property is set to 0, this port will not
have a PVID at all, so it will drop all untagged and priority-tagged
traffic).
So, instead of testing the configuration that was intended, we are
testing a different one, where one port has PVID 2 and the other has
no PVID. This incorrect version of the test should also pass, but is
ineffective for its purpose, so fix the typo.
This typo has an impact on results of the test,
potentially leading to wrong conclusions regarding
the functionality of a network device.
The tests results:
TEST: Switch ports in VLAN-aware bridge with different PVIDs:
Unicast non-IP untagged [ OK ]
Multicast non-IP untagged [ OK ]
Broadcast non-IP untagged [ OK ]
Unicast IPv4 untagged [ OK ]
Multicast IPv4 untagged [ OK ]
Unicast IPv6 untagged [ OK ]
Multicast IPv6 untagged [ OK ]
Unicast non-IP VID 1 [ OK ]
Multicast non-IP VID 1 [ OK ]
Broadcast non-IP VID 1 [ OK ]
Unicast IPv4 VID 1 [ OK ]
Multicast IPv4 VID 1 [ OK ]
Unicast IPv6 VID 1 [ OK ]
Multicast IPv6 VID 1 [ OK ]
Unicast non-IP VID 4094 [ OK ]
Multicast non-IP VID 4094 [ OK ]
Broadcast non-IP VID 4094 [ OK ]
Unicast IPv4 VID 4094 [ OK ]
Multicast IPv4 VID 4094 [ OK ]
Unicast IPv6 VID 4094 [ OK ]
Multicast IPv6 VID 4094 [ OK ]
Fixes: 476a4f05d9 ("selftests: forwarding: add a no_forwarding.sh test")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kacper Ludwinski <kac.ludwinski@icloud.com>
Link: https://patch.msgid.link/20241002051016.849-1-kac.ludwinski@icloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new netfilter selftests to test against br_netfilter panics when
VxLAN single-device is used together with untagged traffic and high MTU.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241001154400.22787-3-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec.
-----BEGIN PGP SIGNATURE-----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=RpGO
-----END PGP SIGNATURE-----
Merge tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec"
* tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
ALSA: line6: add hw monitor volume control to POD HD500X
ALSA: gus: Fix some error handling paths related to get_bpos() usage
ALSA: hda: Add missing parameter description for snd_hdac_stream_timecounter_init()
ALSA: usb-audio: Add native DSD support for Luxman D-08u
ALSA: core: add isascii() check to card ID generator
MAINTAINERS: ALSA: use linux-sound@vger.kernel.org list
Revert "ALSA: hda: Conditionally use snooping for AMD HDMI"
ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
ALSA: hda: fix trigger_tstamp_latched
ALSA: hda/realtek: Add a quirk for HP Pavilion 15z-ec200
ALSA: hda/generic: Drop obsoleted obey_preferred_dacs flag
ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs
ALSA: silence integer wrapping warning
ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
...
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
- mac802154: fix potential RCU dereference issue in mac802154_scan_worker
- eth: fec: restart PPS after link state change
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmb+giESHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkDowP/25YsDA8uaH5yelI85vUgp1T50MWgFxJ
ARm58Pzxr8byX6eIup95xSsjLvMbLaWj5LIA2Y49AV0fWVgGn0U8yx4mPy0Czhdg
J1oxtyoV1pR2V/okWzD4yhZV2on7OGsS73I6J1s6BAowezr19A+aa5Un57dW/103
ccwBuBOYlSIOIHmarOxuFhWMYcwXreNBHa9K7J6JtDFn9F56fUn+ZoIUJ7x27cSO
eWhh9bIkeEb+xYeUXAjNP3pBvJ1xpwIyZv+JMTp40jNsAXPjSpI3Jwd1YlAAMuT9
J2dW0Zs8uwm5LzBPFvI9iM0WHEmVy6+b32NjnKVwPn2+XGGWQss52bmRElNcJkrw
4NeG6/6CPIE0xuczBECuMa0X68NDKIZsjy3Q3OahV82ef2cwhRk6FexyIg5oiMPx
KmMi5B+UQw6ZY3ZF/ME/0jJx/H5ayOC01yNBaTUPrLJr8gjquWEMjZXEqJsdyixJ
5OoZeKG5oN6HkN7g/IxoFjg/W/g93OULO3qH+IzLQG4NlVs6Zp4ykL7dT+Py2zzc
Ru3n5+HA4PqDn2u7gmP1mu2g/lmKUIZEEvR+msP81Cywlz5qtWIH1a6oIeVC7bjt
JNhgBgzKGGMGdgmhYNzXw213WCEbz0+as2SNlvlbiqMP5FKQPLzzBVuJoz4AtJVn
cyVy7D66HuMW
=cq2I
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
-----BEGIN PGP SIGNATURE-----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=UUcp
-----END PGP SIGNATURE-----
Merge tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect documentation in uapi/linux/netfilter/nf_tables.h
regarding flowtable hooks, from Phil Sutter.
2) Fix nft_audit.sh selftests with newer nft binaries, due to different
(valid) audit output, also from Phil.
3) Disable BH when duplicating packets via nf_dup infrastructure,
otherwise race on nf_skb_duplicated for locally generated traffic.
From Eric.
4) Missing return in callback of selftest C program, from zhang jiao.
netfilter pull request 24-10-02
* tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: Add missing return value
netfilter: nf_tables: prevent nf_skb_duplicated corruption
selftests: netfilter: Fix nft_audit.sh for newer nft binaries
netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED
====================
Link: https://patch.msgid.link/20241002202421.1281311-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The include.sh file is generated for inclusion and should not be executable.
Otherwise, it will be added to kselftest-list.txt. Additionally, add the
executable bit for test.py at the same time to ensure proper functionality.
Fixes: 3ade6ce125 ("selftests: rds: add testing infrastructure")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240927041349.81216-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
step_after_suspend_test fails with device busy error while
writing to /sys/power/state to start suspend. The test believes
it failed to enter suspend state with
$ sudo ./step_after_suspend_test
TAP version 13
Bail out! Failed to enter Suspend state
However, in the kernel message, I indeed see the system get
suspended and then wake up later.
[611172.033108] PM: suspend entry (s2idle)
[611172.044940] Filesystems sync: 0.006 seconds
[611172.052254] Freezing user space processes
[611172.059319] Freezing user space processes completed (elapsed 0.001 seconds)
[611172.067920] OOM killer disabled.
[611172.072465] Freezing remaining freezable tasks
[611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[611172.089724] printk: Suspending console(s) (use no_console_suspend to debug)
[611172.117126] serial 00:03: disabled
some other hardware get reconnected
[611203.136277] OOM killer enabled.
[611203.140637] Restarting tasks ...
[611203.141135] usb 1-8.1: USB disconnect, device number 7
[611203.141755] done.
[611203.155268] random: crng reseeded on system resumption
[611203.162059] PM: suspend exit
After investigation, I noticed that for the code block
if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem"))
ksft_exit_fail_msg("Failed to enter Suspend state\n");
The write will return -1 and errno is set to 16 (device busy).
It should be caused by the write function is not successfully returned
before the system suspend and the return value get messed when waking up.
As a result, It may be better to check the time passed of those few
instructions to determine whether the suspend is executed correctly for
it is pretty hard to execute those few lines for 5 seconds.
The timer to wake up the system is set to expire after 5 seconds and
no re-arm. If the timer remaining time is 0 second and 0 nano secomd,
it means the timer expired and wake the system up. Otherwise, the system
could be considered to enter the suspend state failed if there is any
remaining time.
After appling this patch, the test would not fail for it believes the
system does not go to suspend by mistake. It now could continue to the
rest part of the test after suspend.
Fixes: bfd092b8c2 ("selftests: breakpoint: add step_after_suspend_test")
Reported-by: Sinadin Shan <sinadin.shan@oracle.com>
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Insert raw strings to prevent Python3 from interpreting string literals
as Unicode strings and "\d" as invalid escaped sequence.
Fix the warnings:
tools/testing/selftests/devices/probe/test_discoverable_devices.py:48:
SyntaxWarning: invalid escape sequence '\d' usb_controller_sysfs_dir =
"usb[\d]+"
tools/testing/selftests/devices/probe/test_discoverable_devices.py: 94:
SyntaxWarning: invalid escape sequence '\d' re_usb_version =
re.compile("PRODUCT=.*/(\d)/.*")
Fixes: dacf1d7a78 ("kselftest: Add test to verify probe of devices from discoverable buses")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmb9kbIACgkQJNaLcl1U
h9DoEAf/YFyHf5UchliSj11taVVDxzIZznDVfJdhxw6Iktj7b7SinUNRvGfixXyV
ELbRDP291/Cx0AuoRTbj+wZpO687uLVdTAUfX9OEXIOku0kRCA0XZOyAe+tgtKgr
rCIaj9sCn6CxYWBw4VBDcP4tgvh2igcYKeO2bUvvukHdTJBYTiUxrcJCkVDBQr4t
bzvdlalukcop3yMPZbf41CGf7T0tfh8KkJaNbdnhQLoKD3rekYsShZYmH1wRmCQc
fnwWuOgoREIilPLbae7fhdFmH1EscIt4iZcq8j+tl1Kvj1zKabU0We4Rx2rfWZ/Y
pd+YwxRnrXNI2+hUG6nXAVtYjPRa/A==
=KM7g
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.
The recent addition of support for testing with the x86 specific quirk
KVM_X86_QUIRK_SLOT_ZAP_ALL disabled in the generic memslot tests broke the
build of the KVM selftests for all other architectures:
In file included from include/kvm_util.h:8,
from include/memstress.h:13,
from memslot_modification_stress_test.c:21:
memslot_modification_stress_test.c: In function ‘main’:
memslot_modification_stress_test.c:176:38: error: ‘KVM_X86_QUIRK_SLOT_ZAP_ALL’ undeclared (first use in this function)
176 | KVM_X86_QUIRK_SLOT_ZAP_ALL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Add __x86_64__ guard defines to avoid building the relevant code on other
architectures.
Fixes: 61de4c34b5 ("KVM: selftests: Test memslot move in memslot_perf_test with quirk disabled")
Fixes: 218f641500 ("KVM: selftests: Allow slot modification stress test with quirk disabled")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-ID: <20240930-kvm-build-breakage-v1-1-866fad3cc164@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HID test cases run tests using the run-hid-tools-tests.sh script.
When installed with "make install", the run-hid-tools-tests.sh
script will not be copied over, resulting in the following error message.
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c hid
selftests: hid: hid-core.sh
bash: ./run-hid-tools-tests.sh: No such file or directory
Add the run-hid-tools-tests.sh script to the TEST_FILES in the Makefile
for it to be installed.
Fixes: ffb85d5c9e ("selftests: hid: import hid-tools hid-core tests")
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This prevents false sharing, which makes a large difference on machines
with several NUMA nodes, such as on a dual socket Intel(R) Xeon(R) Gold
6338 CPU @ 2.00GHz, where the "bench-multi" test goes from 2.7s down to
1.9s. While this is just test code, it also forms the basis of how folks
will wind up implementing this in libraries, so we should implement this
simple cache alignment improvement here.
Suggested-by: Florian Weimer <fweimer@redhat.com>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The name of the "load_address" objects has been modified, but the
corresponding entry in the gitignore file must be updated.
Update the load_address entry in the gitignore file to account for
the new names, adding an exception to keep on tracking load_address.c.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This executable is missing from the corresponding gitignore file.
Add unshare_test to the core gitignore list.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The macro MAX_PID_NS_LEVEL is never referenced in the code, so remove it.
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
__fatal_error routine doesn't check strerror_r() return value,
which results in the following compile time warning:
posix_timers.c: In function ‘__fatal_error’:
posix_timers.c:31:9: warning: ignoring return value of ‘strerror_r’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
31 | strerror_r(errno, buf, sizeof(buf));
Fix this by adding a check for return value and error handling appropriate
for the GNU-specific strerror_r() in use in __fatal_error(). Check if
return string is null and handle accordingly.
From Linux strerror_r() manual page:
"The GNU-specific strerror_r() returns a pointer to a string containing
the error message. This may be either a pointer to a string that the
function stores in buf, or a pointer to some (immutable) static string
(in which case buf is unused). If the function stores a string in buf,
then at most buflen bytes are stored (the string may be truncated if
buflen is too small and errnum is unknown). The string always includes
a terminating null byte."
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
