[ Upstream commit 19aa842dcb ]
When the ML type is EPCS the control bitmap is reserved, the length
is always 7 and is captured by the 1st octet after the control.
Fixes: 0f48b8b88a ("wifi: ieee80211: add definitions for multi-link element")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.5790376754a7.I381208cbb72b1be2a88239509294099e9337e254@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80818fdc06 ]
The addition of the "System Do Not Disturb" event code caused the Generic
Desktop D-Pad configuration to be skipped. This commit allows both to be
configured without conflicting with each other.
Fixes: 22d6d060ac ("input: Add support for "Do Not Disturb"")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9897831de6 ]
Export PLL_VIDEO_2X and PLL_MIPI, these will be used to explicitly
select TCON0 clock parent in dts
Fixes: ca1170b699 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on PinePhone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG Pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20250104074035.1611136-2-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Stable-dep-of: 0f368cb7ef ("clk: sunxi-ng: a64: drop redundant CLK_PLL_VIDEO0_2X and CLK_PLL_MIPI")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f029d87009 ]
i.MX91 has similar Clock Control Module(CCM) design as i.MX93, only add
few new clock compared to i.MX93.
Add a new compatible string and some new clocks for i.MX91.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241023184651.381265-4-pengfei.li_1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Stable-dep-of: 32e9dea264 ("dt-bindings: clock: imx93: Add SPDIF IPG clk")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0813ce2e5 ]
IMX93_CLK_END should be dropped as it is not part of the ABI.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241023184651.381265-3-pengfei.li_1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Stable-dep-of: 32e9dea264 ("dt-bindings: clock: imx93: Add SPDIF IPG clk")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a596a50c4 ]
All callers of inet_getpeer() want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a853c60950 ("inetpeer: do not get a refcount in inet_getpeer()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 661cd8fc8e ]
All callers of inet_getpeer_v4() and inet_getpeer_v6()
want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a853c60950 ("inetpeer: do not get a refcount in inet_getpeer()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceb8bf2cea ]
Commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 2505f87eb3 ("hwmon: (nct6775): Actually make use of the HWMON_NCT6775 symbol namespace")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e56ebde24 ]
Fix the handling of a connection abort that we've received. Though the
abort is at the connection level, it needs propagating to the calls on that
connection. Whilst the propagation bit is performed, the calls aren't then
woken up to go and process their termination, and as no further input is
forthcoming, they just hang.
Also add some tracing for the logging of connection aborts.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a430d99e34 ]
In /proc/schedstat, lb_hot_gained reports the number hot tasks pulled
during load balance. This value is incremented in can_migrate_task()
if the task is migratable and hot. After incrementing the value,
load balancer can still decide not to migrate this task leading to wrong
accounting. Fix this by incrementing stats when hot tasks are detached.
This issue only exists in detach_tasks() where we can decide to not
migrate hot task even if it is migratable. However, in detach_one_task(),
we migrate it unconditionally.
[Swapnil: Handled the case where nr_failed_migrations_hot was not accounted properly and wrote commit log]
Fixes: d31980846f ("sched: Move up affinity check to mitigate useless redoing overhead")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: "Gautham R. Shenoy" <gautham.shenoy@amd.com>
Not-yet-signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241220063224.17767-2-swapnil.sapkal@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9c44b9147 ]
Currently, space for raw sample data is always allocated within sample
records for both BPF output and tracepoint events. This leads to unused
space in sample records when raw sample data is not requested.
This patch enforces checking sample type of an event in
perf_sample_save_raw_data(). So raw sample data will only be saved if
explicitly requested, reducing overhead when it is not needed.
Fixes: 0a9081cf0a ("perf/core: Add perf_sample_save_raw_data() helper")
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515193610.2350456-2-yabinc@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9750be93b2 ]
If we manage to begin an async call, but fail to transmit any data on it
due to a signal, we then abort it which causes a race between the
notification of call completion from rxrpc and our attempt to cancel the
notification. The notification will be necessary, however, for async
FetchData to terminate the netfs subrequest.
However, since we get a notification from rxrpc upon completion of a call
(aborted or otherwise), we can just leave it to that.
This leads to calls not getting cleaned up, but appearing in
/proc/net/rxrpc/calls as being aborted with code 6.
Fix this by making the "error_do_abort:" case of afs_make_call() abort the
call and then abandon it to the notification handler.
Fixes: 34fa47612b ("afs: Fix race in async call refcounting")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241216204124.3752367-25-dhowells@redhat.com
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 200f091c95 ]
The 'comm' member will always be NUL terminated, and this is not
fast-path, so we can just perform a direct memcpy during a coredump
instead of potentially deadlocking while holding the task struct lock.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Closes: https://lore.kernel.org/all/d122ece6-3606-49de-ae4d-8da88846bef2@oracle.com
Fixes: c114e9948c ("coredump: Standartize and fix logging")
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Link: https://lore.kernel.org/r/20240928210830.work.307-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d7bde4f27c upstream.
simple_empty() and simple_offset_empty() perform the same task.
The latter's use as a canary to find bugs has not found any new
issues. A subsequent patch will remove the use of the mtree for
iterating directory contents, so revert back to using a similar
mechanism for determining whether a directory is indeed empty.
Only one such mechanism is ever needed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20241228175522.1854234-3-cel@kernel.org
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f90877dd7f ]
When using !CONFIG_SECCOMP with CONFIG_GENERIC_ENTRY, the
randconfig bots found the following snag:
kernel/entry/common.c: In function 'syscall_trace_enter':
>> kernel/entry/common.c:52:23: error: implicit declaration
of function '__secure_computing' [-Wimplicit-function-declaration]
52 | ret = __secure_computing(NULL);
| ^~~~~~~~~~~~~~~~~~
Since generic entry calls __secure_computing() unconditionally,
fix this by moving the stub out of the ifdef clause for
CONFIG_HAVE_ARCH_SECCOMP_FILTER so it's always available.
Link: https://lore.kernel.org/oe-kbuild-all/202501061240.Fzk9qiFZ-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250108-seccomp-stub-2-v2-1-74523d49420f@linaro.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2f8dea1692 upstream.
Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway
through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to
CPUHP_ONLINE:
Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set
to 1 throughout. However, during a CPU unplug operation, the tick and the
clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online
state, for instance CFS incorrectly assumes that the hrtick is already
active, and the chance of the clockevent device to transition to oneshot
mode is also lost forever for the CPU, unless it goes back to a lower state
than CPUHP_HRTIMERS_PREPARE once.
This round-trip reveals another issue; cpu_base.online is not set to 1
after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer().
Aside of that, the bulk of the per CPU state is not reset either, which
means there are dangling pointers in the worst case.
Address this by adding a corresponding startup() callback, which resets the
stale per CPU state and sets the online flag.
[ tglx: Make the new callback unconditionally available, remove the online
modification in the prepare() callback and clear the remaining
state in the starting callback instead of the prepare callback ]
Fixes: 5c0930ccaa ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241220134421.3809834-1-koichiro.den@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60295b944f upstream.
Tracing tools like perf and trace-cmd read the /sys/kernel/tracing/events/*/*/format
files to know how to parse the data and also how to print it. For the
"print fmt" portion of that file, if anything uses an enum that is not
exported to the tracing system, user space will not be able to parse it.
The GFP flags use to be defines, and defines get translated in the print
fmt sections. But now they are converted to use enums, which is not.
The mm_page_alloc trace event format use to have:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (((struct page *)vmemmap_base) + (REC->pfn)) : ((void
*)0), REC->pfn != -1UL ? REC->pfn : 0, REC->order, REC->migratetype,
(REC->gfp_flags) ? __print_flags(REC->gfp_flags, "|", {( unsigned
long)(((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) |
(( gfp_t)0x40000u) | (( gfp_t)0x80000u) | (( gfp_t)0x2000u)) & ~((
gfp_t)(0x400u|0x800u))) | (( gfp_t)0x400u)), "GFP_TRANSHUGE"}, {( unsigned
long)((((((( gfp_t)(0x400u|0x800u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) |
(( gfp_t)0x100000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u) | (( gfp_t)0)) ...
Where the GFP values are shown and not their names. But after the GFP
flags were converted to use enums, it has:
print fmt: "page=%p pfn=0x%lx order=%d migratetype=%d gfp_flags=%s",
REC->pfn != -1UL ? (vmemmap + (REC->pfn)) : ((void *)0), REC->pfn != -1UL
? REC->pfn : 0, REC->order, REC->migratetype, (REC->gfp_flags) ?
__print_flags(REC->gfp_flags, "|", {( unsigned long)((((((((
gfp_t)(((((1UL))) << (___GFP_DIRECT_RECLAIM_BIT))|((((1UL))) <<
(___GFP_KSWAPD_RECLAIM_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_IO_BIT)))
| (( gfp_t)((((1UL))) << (___GFP_FS_BIT))) | (( gfp_t)((((1UL))) <<
(___GFP_HARDWALL_BIT)))) | (( gfp_t)((((1UL))) << (___GFP_HIGHMEM_BIT))))
| (( gfp_t)((((1UL))) << (___GFP_MOVABLE_BIT))) | (( gfp_t)0)) | ((
gfp_t)((((1UL))) << (___GFP_COMP_BIT))) ...
Where the enums names like ___GFP_KSWAPD_RECLAIM_BIT are shown and not their
values. User space has no way to convert these names to their values and
the output will fail to parse. What is shown is now:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x1d1ac1 order=0 migratetype=1 gfp_flags=0x140cca
The TRACE_DEFINE_ENUM() macro was created to handle enums in the print fmt
files. This causes them to be replaced at boot up with the numbers, so
that user space tooling can parse it. By using this macro, the output is
back to the human readable:
mm_page_alloc: page=0xffffffff981685f3 pfn=0x122233 order=0 migratetype=1 gfp_flags=GFP_HIGHUSER_MOVABLE|__GFP_COMP
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250116214438.749504792@goodmis.org
Reported-by: Michael Petlan <mpetlan@redhat.com>
Closes: https://lore.kernel.org/all/87be5f7c-1a0-dad-daa0-54e342efaea7@redhat.com/
Fixes: 772dd03427 ("mm: enumerate all gfp flags")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cef0bb836 upstream.
When mremap()ing a memory region previously registered with userfaultfd as
write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in
flag clearing leads to a mismatch between the vma flags (which have
uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp
cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to
trigger a warning in page_table_check_pte_flags() due to setting the pte
to writable while uffd-wp is still set.
Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any
such mremap() so that the values are consistent with the existing clearing
of VM_UFFD_WP. Be careful to clear the logical flag regardless of its
physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE,
huge PMD and hugetlb paths.
Link: https://lkml.kernel.org/r/20250107144755.1871363-2-ryan.roberts@arm.com
Co-developed-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Signed-off-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/linux-mm/810b44a8-d2ae-4107-b665-5a42eae2d948@arm.com/
Fixes: 63b2d4174c ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl")
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cacd9ae4bf ]
As the comment above waitqueue_active() explains, it can only be used
if both waker and waiter have mb()'s that pair with each other. However
__pollwait() is broken in this respect.
This is not pipe-specific, but let's look at pipe_poll() for example:
poll_wait(...); // -> __pollwait() -> add_wait_queue()
LOAD(pipe->head);
LOAD(pipe->head);
In theory these LOAD()'s can leak into the critical section inside
add_wait_queue() and can happen before list_add(entry, wq_head), in this
case pipe_poll() can race with wakeup_pipe_readers/writers which do
smp_mb();
if (waitqueue_active(wq_head))
wake_up_interruptible(wq_head);
There are more __pollwait()-like functions (grep init_poll_funcptr), and
it seems that at least ep_ptable_queue_proc() has the same problem, so the
patch adds smp_mb() into poll_wait().
Link: https://lore.kernel.org/all/20250102163320.GA17691@redhat.com/
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250107162717.GA18922@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 202580b602 ]
PRUSS APIs in pruss_driver.h produce lots of compilation errors when
CONFIG_TI_PRUSS is not set.
The errors and warnings,
warning: returning 'void *' from a function with return type 'int' makes
integer from pointer without a cast [-Wint-conversion]
error: expected identifier or '(' before '{' token
Fix these warnings and errors by fixing the return type of pruss APIs as
well as removing the misplaced semicolon from pruss_cfg_xfr_enable()
Fixes: 0211cc1e4f ("soc: ti: pruss: Add helper functions to set GPI mode, MII_RT_event and XFR")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241220100508.1554309-2-danishanwar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbc16bceea ]
page_pool_ref_netmem() should work with either netmem representation, but
currently it casts to a page with netmem_to_page(), which will fail with
net iovs. Use netmem_get_pp_ref_count_ref() instead.
Fixes: 8ab79ed50c ("page_pool: devmem support")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/20250108220644.3528845-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 344bac8f0d upstream.
Move mnt->mnt_node into the union with mnt->mnt_rcu and mnt->mnt_llist
instead of keeping it with mnt->mnt_list. This allows us to use
RB_CLEAR_NODE(&mnt->mnt_node) in umount_tree() as well as
list_empty(&mnt->mnt_node). That in turn allows us to remove MNT_ONRB.
This also fixes the bug reported in [1] where seemingly MNT_ONRB wasn't
set in @mnt->mnt_flags even though the mount was present in the mount
rbtree of the mount namespace.
The root cause is the following race. When a btrfs subvolume is mounted
a temporary mount is created:
btrfs_get_tree_subvol()
{
mnt = fc_mount()
// Register the newly allocated mount with sb->mounts:
lock_mount_hash();
list_add_tail(&mnt->mnt_instance, &mnt->mnt.mnt_sb->s_mounts);
unlock_mount_hash();
}
and registered on sb->s_mounts. Later it is added to an anonymous mount
namespace via mount_subvol():
-> mount_subvol()
-> mount_subtree()
-> alloc_mnt_ns()
mnt_add_to_ns()
vfs_path_lookup()
put_mnt_ns()
The mnt_add_to_ns() call raises MNT_ONRB in @mnt->mnt_flags. If someone
concurrently does a ro remount:
reconfigure_super()
-> sb_prepare_remount_readonly()
{
list_for_each_entry(mnt, &sb->s_mounts, mnt_instance) {
}
all mounts registered in sb->s_mounts are visited and first
MNT_WRITE_HOLD is raised, then MNT_READONLY is raised, and finally
MNT_WRITE_HOLD is removed again.
The flag modification for MNT_WRITE_HOLD/MNT_READONLY and MNT_ONRB race
so MNT_ONRB might be lost.
Fixes: 2eea9ce431 ("mounts: keep list of mounts in an rbtree")
Cc: <stable@kernel.org> # v6.8+
Link: https://lore.kernel.org/r/20241215-vfs-6-14-mount-work-v1-1-fd55922c4af8@kernel.org
Link: https://lore.kernel.org/r/ec6784ed-8722-4695-980a-4400d4e7bd1a@gmx.com [1]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7bac656875 upstream.
PHY might already be powered on during ufs_qcom_power_up_sequence() in a
couple of cases:
1. During UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH quirk
2. Resuming from spm_lvl = 5 suspend
In those cases, it is necessary to call phy_power_off() and phy_exit() in
ufs_qcom_power_up_sequence() function to power off the PHY before calling
phy_init() and phy_power_on().
Case (1) is doing it via ufs_qcom_reinit_notify() callback, but case (2) is
not handled. So to satisfy both cases, call phy_power_off() and phy_exit()
if the phy_count is non-zero. And with this change, the reinit_notify()
callback is no longer needed.
This fixes the below UFS resume failure with spm_lvl = 5:
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed
ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: -5
ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume returns -5
ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error -5
Cc: stable@vger.kernel.org # 6.3
Fixes: baf5ddac90 ("scsi: ufs: ufs-qcom: Add support for reinitializing the UFS device")
Reported-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org> # on SM8550-HDK
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241219-ufs-qcom-suspend-fix-v3-1-63c4b95a70b9@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3479c7549f ]
If the backlog of listen() is set to zero, sk_acceptq_is_full() allows
one connection to be made, but inet_csk_reqsk_queue_is_full() does not.
When the net.ipv4.tcp_syncookies is zero, inet_csk_reqsk_queue_is_full()
will cause an immediate drop before the sk_acceptq_is_full() check in
tcp_conn_request(), resulting in no connection can be made.
This patch tries to keep consistent with 64a146513f ("[NET]: Revert
incorrect accept queue backlog changes.").
Link: https://lore.kernel.org/netdev/20250102080258.53858-1-kuniyu@amazon.com/
Fixes: ef547f2ac1 ("tcp: remove max_qlen_log")
Signed-off-by: Zhongqiu Duan <dzq.aishenghu0@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250102171426.915276-1-dzq.aishenghu0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4e338de17 ]
netfs: Fix is-caching check in read-retry
The read-retry code checks the NETFS_RREQ_COPY_TO_CACHE flag to determine
if there might be failed reads from the cache that need turning into reads
from the server, with the intention of skipping the complicated part if it
can. The code that set the flag, however, got lost during the read-side
rewrite.
Fix the check to see if the cache_resources are valid instead. The flag
can then be removed.
Fixes: ee4cdf7ba8 ("netfs: Speed up buffered reading")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/3752048.1734381285@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51d20d1dac ]
During concurrent append writes to XFS filesystem, zero padding data
may appear in the file after power failure. This happens due to imprecise
disk size updates when handling write completion.
Consider this scenario with concurrent append writes same file:
Thread 1: Thread 2:
------------ -----------
write [A, A+B]
update inode size to A+B
submit I/O [A, A+BS]
write [A+B, A+B+C]
update inode size to A+B+C
<I/O completes, updates disk size to min(A+B+C, A+BS)>
<power failure>
After reboot:
1) with A+B+C < A+BS, the file has zero padding in range [A+B, A+B+C]
|< Block Size (BS) >|
|DDDDDDDDDDDDDDDD0000000000000000|
^ ^ ^
A A+B A+B+C
(EOF)
2) with A+B+C > A+BS, the file has zero padding in range [A+B, A+BS]
|< Block Size (BS) >|< Block Size (BS) >|
|DDDDDDDDDDDDDDDD0000000000000000|00000000000000000000000000000000|
^ ^ ^ ^
A A+B A+BS A+B+C
(EOF)
D = Valid Data
0 = Zero Padding
The issue stems from disk size being set to min(io_offset + io_size,
inode->i_size) at I/O completion. Since io_offset+io_size is block
size granularity, it may exceed the actual valid file data size. In
the case of concurrent append writes, inode->i_size may be larger
than the actual range of valid file data written to disk, leading to
inaccurate disk size updates.
This patch modifies the meaning of io_size to represent the size of
valid data within EOF in an ioend. If the ioend spans beyond i_size,
io_size will be trimmed to provide the file with more accurate size
information. This is particularly useful for on-disk size updates
at completion time.
After this change, ioends that span i_size will not grow or merge with
other ioends in concurrent scenarios. However, these cases that need
growth/merging rarely occur and it seems no noticeable performance impact.
Although rounding up io_size could enable ioend growth/merging in these
scenarios, we decided to keep the code simple after discussion [1].
Another benefit is that it makes the xfs_ioend_is_append() check more
accurate, which can reduce unnecessary end bio callbacks of xfs_end_bio()
in certain scenarios, such as repeated writes at the file tail without
extending the file size.
Link [1]: https://patchwork.kernel.org/project/xfs/patch/20241113091907.56937-1-leo.lilong@huawei.com
Fixes: ae259a9c85 ("fs: introduce iomap infrastructure") # goes further back than this
Signed-off-by: Long Li <leo.lilong@huawei.com>
Link: https://lore.kernel.org/r/20241209114241.3725722-3-leo.lilong@huawei.com
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30dac24e14 ]
Most of the callers of wbc_account_cgroup_owner() are converting a folio
to page before calling the function. wbc_account_cgroup_owner() is
converting the page back to a folio to call mem_cgroup_css_from_folio().
Convert wbc_account_cgroup_owner() to take a folio instead of a page,
and convert all callers to pass a folio directly except f2fs.
Convert the page to folio for all the callers from f2fs as they were the
only callers calling wbc_account_cgroup_owner() with a page. As f2fs is
already in the process of converting to folios, these call sites might
also soon be calling wbc_account_cgroup_owner() with a folio directly in
the future.
No functional changes. Only compile tested.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240926140121.203821-1-kernel@pankajraghav.com
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 51d20d1dac ("iomap: fix zero padding data issue in concurrent append writes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 59d9094df3 upstream.
The folio refcount may be increased unexpectly through try_get_folio() by
caller such as split_huge_pages. In huge_pmd_unshare(), we use refcount
to check whether a pmd page table is shared. The check is incorrect if
the refcount is increased by the above caller, and this can cause the page
table leaked:
BUG: Bad page state in process sh pfn:109324
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x66 pfn:0x109324
flags: 0x17ffff800000000(node=0|zone=2|lastcpupid=0xfffff)
page_type: f2(table)
raw: 017ffff800000000 0000000000000000 0000000000000000 0000000000000000
raw: 0000000000000066 0000000000000000 00000000f2000000 0000000000000000
page dumped because: nonzero mapcount
...
CPU: 31 UID: 0 PID: 7515 Comm: sh Kdump: loaded Tainted: G B 6.13.0-rc2master+ #7
Tainted: [B]=BAD_PAGE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
dump_stack+0x18/0x28
bad_page+0x8c/0x130
free_page_is_bad_report+0xa4/0xb0
free_unref_page+0x3cc/0x620
__folio_put+0xf4/0x158
split_huge_pages_all+0x1e0/0x3e8
split_huge_pages_write+0x25c/0x2d8
full_proxy_write+0x64/0xd8
vfs_write+0xcc/0x280
ksys_write+0x70/0x110
__arm64_sys_write+0x24/0x38
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0x128
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x190/0x198
The issue may be triggered by damon, offline_page, page_idle, etc, which
will increase the refcount of page table.
1. The page table itself will be discarded after reporting the
"nonzero mapcount".
2. The HugeTLB page mapped by the page table miss freeing since we
treat the page table as shared and a shared page table will not be
unmapped.
Fix it by introducing independent PMD page table shared count. As
described by comment, pt_index/pt_mm/pt_frag_refcount are used for s390
gmap, x86 pgds and powerpc, pt_share_count is used for x86/arm64/riscv
pmds, so we can reuse the field as pt_share_count.
Link: https://lkml.kernel.org/r/20241216071147.3984217-1-liushixin2@huawei.com
Fixes: 39dde65c99 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Ken Chen <kenneth.w.chen@intel.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ec396d05d upstream.
Patch series "mm: reinstate ability to map write-sealed memfd mappings
read-only".
In commit 158978945f ("mm: perform the mapping_map_writable() check
after call_mmap()") (and preceding changes in the same series) it became
possible to mmap() F_SEAL_WRITE sealed memfd mappings read-only.
Commit 5de195060b ("mm: resolve faulty mmap_region() error path
behaviour") unintentionally undid this logic by moving the
mapping_map_writable() check before the shmem_mmap() hook is invoked,
thereby regressing this change.
This series reworks how we both permit write-sealed mappings being mapped
read-only and disallow mprotect() from undoing the write-seal, fixing this
regression.
We also add a regression test to ensure that we do not accidentally
regress this in future.
Thanks to Julian Orth for reporting this regression.
This patch (of 2):
In commit 158978945f ("mm: perform the mapping_map_writable() check
after call_mmap()") (and preceding changes in the same series) it became
possible to mmap() F_SEAL_WRITE sealed memfd mappings read-only.
This was previously unnecessarily disallowed, despite the man page
documentation indicating that it would be, thereby limiting the usefulness
of F_SEAL_WRITE logic.
We fixed this by adapting logic that existed for the F_SEAL_FUTURE_WRITE
seal (one which disallows future writes to the memfd) to also be used for
F_SEAL_WRITE.
For background - the F_SEAL_FUTURE_WRITE seal clears VM_MAYWRITE for a
read-only mapping to disallow mprotect() from overriding the seal - an
operation performed by seal_check_write(), invoked from shmem_mmap(), the
f_op->mmap() hook used by shmem mappings.
By extending this to F_SEAL_WRITE and critically - checking
mapping_map_writable() to determine if we may map the memfd AFTER we
invoke shmem_mmap() - the desired logic becomes possible. This is because
mapping_map_writable() explicitly checks for VM_MAYWRITE, which we will
have cleared.
Commit 5de195060b ("mm: resolve faulty mmap_region() error path
behaviour") unintentionally undid this logic by moving the
mapping_map_writable() check before the shmem_mmap() hook is invoked,
thereby regressing this change.
We reinstate this functionality by moving the check out of shmem_mmap()
and instead performing it in do_mmap() at the point at which VMA flags are
being determined, which seems in any case to be a more appropriate place
in which to make this determination.
In order to achieve this we rework memfd seal logic to allow us access to
this information using existing logic and eliminate the clearing of
VM_MAYWRITE from seal_check_write() which we are performing in do_mmap()
instead.
Link: https://lkml.kernel.org/r/99fc35d2c62bd2e05571cf60d9f8b843c56069e0.1732804776.git.lorenzo.stoakes@oracle.com
Fixes: 5de195060b ("mm: resolve faulty mmap_region() error path behaviour")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Julian Orth <ju.orth@gmail.com>
Closes: https://lore.kernel.org/all/CAHijbEUMhvJTN9Xw1GmbM266FXXv=U7s4L_Jem5x3AaPZxrYpQ@mail.gmail.com/
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45d339fefa upstream.
Driver queries vport_cxt.num_plane and enables multiplane when it is
greater then 0, but some old FWs (versions from x.40.1000 till x.42.1000),
report vport_cxt.num_plane = 1 unexpectedly.
Fix it by querying num_plane only when HCA_CAP2.multiplane bit is set.
Fixes: 2a5db20fa5 ("RDMA/mlx5: Add support to multi-plane device and port")
Link: https://patch.msgid.link/r/1ef901acdf564716fcf550453cf5e94f343777ec.1734610916.git.leon@kernel.org
Cc: stable@vger.kernel.org
Reported-by: Francesco Poli <invernomuto@paranoici.org>
Closes: https://lore.kernel.org/all/nvs4i2v7o6vn6zhmtq4sgazy2hu5kiulukxcntdelggmznnl7h@so3oul6uwgbl/
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b238e187b4 ]
Use BPF helper number instead of function pointer in
bpf_helper_changes_pkt_data(). This would simplify usage of this
function in verifier.c:check_cfg() (in a follow-up patch),
where only helper number is easily available and there is no real need
to lookup helper proto.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 1a4607ffba ("bpf: consider that tail calls invalidate packet pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47b17ba05a ]
Commit 5d7e328e20 ("ASoC: cs35l56: Revert support for dual-ownership
of ASP registers")
replaced cs35l56_force_sync_asp1_registers_from_cache() with a dummy
implementation so that the HDA driver would continue to build.
Remove the calls from HDA and remove the stub function.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241206105757.718750-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a4f56fbcc ]
In the cited commit, when changing from switchdev to legacy mode,
uplink representor's netdev is kept, and its profile is replaced with
nic profile, so netdev is detached from old profile, then attach to
new profile.
During profile change, the hardware resources allocated by the old
profile will be cleaned up. However, the cleanup is relying on the
related kernel modules. And they may need to flush themselves first,
which is triggered by netdev events, for example, NETDEV_UNREGISTER.
However, netdev is kept, or netdev_register is called after the
cleanup, which may cause troubles because the resources are still
referred by kernel modules.
The same process applies to all the caes when uplink is leaving
switchdev mode, including devlink eswitch mode set legacy, driver
unload and devlink reload. For the first one, it can be blocked and
returns failure to users, whenever possible. But it's hard for the
others. Besides, the attachment to nic profile is unnecessary as the
netdev will be unregistered anyway for such cases.
So in this patch, the original behavior is kept only for devlink
eswitch set mode legacy. For the others, moves netdev unregistration
before the profile change.
Fixes: 7a9fb35e8c ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241220081505.1286093-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e05feab22f ]
Different core device types such as PFs and VFs shouldn't be affiliated
together since they have different capabilities, fix that by enforcing
type check before doing the affiliation.
Fixes: 32f69e4be2 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/88699500f690dff1c1852c1ddb71f8a1cc8b956e.1733233480.git.leonro@nvidia.com
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ef2b9e698 ]
Make bio_is_zone_append globally available, because file systems need
to use to check for a zone append bio in their end_io handlers to deal
with the block layer emulation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241104062647.91160-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 6c3864e055 ("btrfs: use bio_is_zone_append() in the completion handler")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f718faf394 ]
Before commit:
f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
the frozen task stat was reported as 'D' in cgroup v1.
However, after rewriting the core freezer logic, the frozen task stat is
reported as 'R'. This is confusing, especially when a task with stat of
'S' is frozen.
This bug can be reproduced with these steps:
$ cd /sys/fs/cgroup/freezer/
$ mkdir test
$ sleep 1000 &
[1] 739 // task whose stat is 'S'
$ echo 739 > test/cgroup.procs
$ echo FROZEN > test/freezer.state
$ ps -aux | grep 739
root 739 0.1 0.0 8376 1812 pts/0 R 10:56 0:00 sleep 1000
As shown above, a task whose stat is 'S' was changed to 'R' when it was
frozen.
To solve this regression, simply maintain the same reported state as
before the rewrite.
[ mingo: Enhanced the changelog and comments ]
Fixes: f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20241217004818.3200515-1-chenridong@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 724c6ce38b ]
For the most part of the C++ history, it couldn't have type
declarations inside anonymous unions for different reasons. At the
same time, __struct_group() relies on the latters, so when the @TAG
argument is not empty, C++ code doesn't want to build (even under
`extern "C"`):
../linux/include/uapi/linux/pkt_cls.h:25:24: error:
'struct tc_u32_sel::<unnamed union>::tc_u32_sel_hdr,' invalid;
an anonymous union may only have public non-static data members
[-fpermissive]
The safest way to fix this without trying to switch standards (which
is impossible in UAPI anyway) etc., is to disable tag declaration
for that language. This won't break anything since for now it's not
buildable at all.
Use a separate definition for __struct_group() when __cplusplus is
defined to mitigate the error, including the version from tools/.
Fixes: 50d7bd38c3 ("stddef: Introduce struct_group() helper macro")
Reported-by: Christopher Ferris <cferris@google.com>
Closes: https://lore.kernel.org/linux-hardening/Z1HZpe3WE5As8UAz@google.com
Suggested-by: Kees Cook <kees@kernel.org> # __struct_group_tag()
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20241219135734.2130002-1-aleksander.lobakin@intel.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dcbef0798e upstream.
The get_dma_ops and set_dma_ops APIs were never for driver to use. Remove
these calls from QDMA driver. Instead, pass the DMA device pointer from the
qdma_platdata structure.
Fixes: 73d5fc92a1 ("dmaengine: amd: qdma: Add AMD QDMA driver")
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240918181022.2155715-1-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d888b7af7c ]
When we do sk_psock_verdict_apply->sk_psock_skb_ingress, an sk_msg will
be created out of the skb, and the rmem accounting of the sk_msg will be
handled by the skb.
For skmsgs in __SK_REDIRECT case of tcp_bpf_send_verdict, when redirecting
to the ingress of a socket, although we sk_rmem_schedule and add sk_msg to
the ingress_msg of sk_redir, we do not update sk_rmem_alloc. As a result,
except for the global memory limit, the rmem of sk_redir is nearly
unlimited. Thus, add sk_rmem_alloc related logic to limit the recv buffer.
Since the function sk_msg_recvmsg and __sk_psock_purge_ingress_msg are
used in these two paths. We use "msg->skb" to test whether the sk_msg is
skb backed up. If it's not, we shall do the memory accounting explicitly.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241210012039.1669389-3-zijianzhang@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54f89b3178 ]
When bpf_tcp_ingress() is called, the skmsg is being redirected to the
ingress of the destination socket. Therefore, we should charge its
receive socket buffer, instead of sending socket buffer.
Because sk_rmem_schedule() tests pfmemalloc of skb, we need to
introduce a wrapper and call it for skmsg.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241210012039.1669389-2-zijianzhang@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30c2de0a26 ]
Fix the following clang compiler warning that is reported if the kernel is
built with W=1:
./include/linux/vmstat.h:518:36: error: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Werror,-Wenum-enum-conversion]
518 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
Link: https://lkml.kernel.org/r/20241212213126.1269116-1-bvanassche@acm.org
Fixes: 9d7ea9a297 ("mm/vmstat: add helpers to get vmstat item names for each enum type")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 900bbaae67 upstream.
Now, the epoll only use wake_up() interface to wake up task.
However, sometimes, there are epoll users which want to use
the synchronous wakeup flag to hint the scheduler, such as
Android binder driver.
So add a wake_up_sync() define, and use the wake_up_sync()
when the sync is true in ep_poll_callback().
Co-developed-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Link: https://lore.kernel.org/r/20240426080548.8203-1-xuewen.yan@unisoc.com
Tested-by: Brian Geffon <bgeffon@google.com>
Reviewed-by: Brian Geffon <bgeffon@google.com>
Reported-by: Benoit Lize <lizeb@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
