commit 0383a8edef upstream.
The host is allowed to set FPU state that includes a disabled
xstate component. Check that this does not cause bad effects.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1025dcd37 upstream.
Rework the guest=>host syncs in the AMX test to use named actions instead
of arbitrary, incrementing numbers. The "stage" of the test has no real
meaning, what matters is what action the test wants the host to perform.
The incrementing numbers are somewhat helpful for triaging failures, but
fully debugging failures almost always requires a much deeper dive into
the test (and KVM).
Using named actions not only makes it easier to extend the test without
having to shift all sync point numbers, it makes the code easier to read.
[Commit message by Sean Christopherson]
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a49157dee upstream.
Some low-level drivers (LLD) access block layer crypto fields, such as
rq->crypt_keyslot and rq->crypt_ctx within `struct request`, to
configure hardware for inline encryption. However, SCSI Error Handling
(EH) commands (e.g., TEST UNIT READY, START STOP UNIT) should not
involve any encryption setup.
To prevent drivers from erroneously applying crypto settings during EH,
this patch saves the original values of rq->crypt_keyslot and
rq->crypt_ctx before an EH command is prepared via scsi_eh_prep_cmnd().
These fields in the 'struct request' are then set to NULL. The original
values are restored in scsi_eh_restore_cmnd() after the EH command
completes.
This ensures that the block layer crypto context does not leak into EH
command execution.
Signed-off-by: Brian Kao <powenkao@google.com>
Link: https://patch.msgid.link/20251218031726.2642834-1-powenkao@google.com
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f28beb69c5 upstream.
Some faulty devices (ZWO EFWmini) have a wrong optional HID class
descriptor count compared to the provided length.
Given that we plainly ignore those optional descriptor, we can attempt
to fix the provided number so we do not lock out those devices.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e008ec6c79 ]
While FIFO/RR have static priority, DEADLINE is a dynamic priority
scheme. Notably it has static priority -1. Do not assume the priority
doesn't change for deadline tasks just because the static priority
doesn't change.
This ensures DL always sees {DE,EN}QUEUE_MOVE where appropriate.
Fixes: ff77e46853 ("sched/rt: Fix PI handling vs. sched_setscheduler()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20260114130528.GB831285@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4de9ff7606 ]
When setup_new_dl_entity() is called from enqueue_task_dl() ->
enqueue_dl_entity(), the rq-clock should already be updated, and
calling update_rq_clock() again is not right.
Move the update_rq_clock() to the one other caller of
setup_new_dl_entity(): sched_init_dl_server().
Fixes: 9f239df555 ("sched/deadline: Initialize dl_servers after SMP")
Reported-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://patch.msgid.link/20260113115622.GA831285@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2a3f51365 ]
EDMA resumes early and suspends late in the system power transition
sequence, while LPI2C enters the NOIRQ stage for both suspend and resume.
This means LPI2C resources become available before EDMA is fully resumed.
Once IRQs are enabled, a slave device may immediately trigger an LPI2C
transfer. If the transfer length meets DMA requirements, the driver will
attempt to use EDMA even though EDMA may still be unavailable.
This timing gap can lead to transfer failures. To prevent this, force
LPI2C to use PIO mode during system-wide suspend and resume transitions.
This reduces dependency on EDMA and avoids using an unready DMA resource.
Fixes: a09c8b3f90 ("i2c: imx-lpi2c: add eDMA mode support for LPI2C")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0c50e3743 ]
The I2C Hub controller is a simpler GENI I2C variant that doesn't
support DMA at all, add a no_dma flag to make sure it nevers selects
the SE DMA mode with mappable 32bytes long transfers.
Fixes: cacd9643ec ("i2c: qcom-geni: add support for I2C Master Hub variant")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12d4fd9a65 ]
ida_alloc_max() interprets its max argument as inclusive.
Using SDW_FW_MAX_DEVICES(16) therefore allows an ID of 16 to be
allocated, but the IRQ domain created for the bus is sized for IDs
0-15. If 16 is returned, irq_create_mapping() fails and the driver
ends up with an invalid IRQ mapping.
Limit the allocation to 0-15 by passing SDW_FW_MAX_DEVICES - 1.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202512240450.hlDH3nCs-lkp@intel.com/
Fixes: aab12022b0 ("soundwire: bus: Add internal slave ID and use for IRQs")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260110201959.2523024-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e1136acf8 ]
The dma_pool created by dma_pool_create() is not destroyed when
dma_async_device_register() or of_dma_controller_register() fails,
causing a resource leak in the probe error paths.
Add dma_pool_destroy() in both error paths to properly release the
allocated dma_pool resource.
Fixes: 7bedaa5537 ("dmaengine: add OMAP DMA engine driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251103073018.643-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb21116099 ]
"family" is an enum, thus cast of pointer on 64-bit compile test with
clang W=1 causes:
phy-bcm-ns-usb3.c:206:17: error: cast to smaller integer type 'enum bcm_ns_family' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
This was already fixed in commit bd6e74a2f0 ("phy: broadcom: ns-usb3:
fix Wvoid-pointer-to-enum-cast warning") but then got bad in commit
21bf6fc47a ("phy: Use device_get_match_data()").
Note that after various discussions the preferred cast is via "unsigned
long", not "uintptr_t".
Fixes: 21bf6fc47a ("phy: Use device_get_match_data()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251224115533.154162-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29fbfa46e4 ]
I think, based on my best understanding, that this type is likely a typo
(even though in the end both are u16)
Signed-off-by: Tingmao Wang <m@maowtm.org>
Fixes: 2fc80c69df ("landlock: Log file-related denials")
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/7339ad7b47f998affd84ca629a334a71f913616d.1765040503.git.m@maowtm.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1a57c3359 ]
Remove bind() call on a client socket that doesn't make sense.
Since strlen(cli_un.sun_path) returns a random value depending on stack
garbage, that many uninitialized bytes are read from the stack as an
unix socket address. This creates random test failures due to the bind
address being invalid or already in use if the same stack value comes up
twice.
Fixes: f83d51a5bd ("selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets")
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20251201003631.190817-1-matthieu@buffet.re
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd09d9a05c ]
The nominal error code for bind(AF_UNSPEC) on an IPv6 socket
is -EAFNOSUPPORT, not -EINVAL. -EINVAL is only returned when
the supplied address struct is too short, which happens to be
the case in current selftests because they treat AF_UNSPEC
like IPv4 sockets do: as an alias for AF_INET (which is a
16-byte struct instead of the 24 bytes required by IPv6
sockets).
Make the union large enough for any address (by adding struct
sockaddr_storage to the union), and make AF_UNSPEC addresses
large enough for any family.
Test for -EAFNOSUPPORT instead, and add a dedicated test case
for truncated inputs with -EINVAL.
Fixes: a549d055a2 ("selftests/landlock: Add network tests")
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://lore.kernel.org/r/20251027190726.626244-2-matthieu@buffet.re
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4d82cbce2 ]
current_check_access_socket() treats AF_UNSPEC addresses as
AF_INET ones, and only later adds special case handling to
allow connect(AF_UNSPEC), and on IPv4 sockets
bind(AF_UNSPEC+INADDR_ANY).
This would be fine except AF_UNSPEC addresses can be as
short as a bare AF_UNSPEC sa_family_t field, and nothing
more. The AF_INET code path incorrectly enforces a length of
sizeof(struct sockaddr_in) instead.
Move AF_UNSPEC edge case handling up inside the switch-case,
before the address is (potentially incorrectly) treated as
AF_INET.
Fixes: fff69fb03d ("landlock: Support network rules with TCP bind and connect")
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://lore.kernel.org/r/20251027190726.626244-4-matthieu@buffet.re
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08aa19de72 ]
devm_pm_runtime_enable() can fail due to memory allocation. The current
code ignores its return value after calling pm_runtime_set_active(),
leaving the device in an inconsistent state if runtime PM initialization
fails.
Check the return value of devm_pm_runtime_enable() and return on
failure. Also move the declaration of 'ret' to the function scope
to support this check.
Fixes: ee8e41b504 ("phy: ti: phy-da8xx-usb: Add runtime PM support")
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251124105734.1027-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cabd25b572 ]
The "index" variable is used as an index into the usbphyc->phys[] array
which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys
then it is one element out of bounds. The "index" comes from the
device tree so it's data that we trust and it's unlikely to be wrong,
however it's obviously still worth fixing the bug. Change the > to >=.
Fixes: 94c358da3a ("phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/aTfHcMJK1wFVnvEe@stanley.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ca52c0983 ]
Enabling runtime PM before attaching the QPHY instance as driver data
can lead to a NULL pointer dereference in runtime PM callbacks that
expect valid driver data. There is a small window where the suspend
callback may run after PM runtime enabling and before runtime forbid.
This causes a sporadic crash during boot:
```
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a1
[...]
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.7+ #116 PREEMPT
Workqueue: pm pm_runtime_work
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : qusb2_phy_runtime_suspend+0x14/0x1e0 [phy_qcom_qusb2]
lr : pm_generic_runtime_suspend+0x2c/0x44
[...]
```
Attach the QPHY instance as driver data before enabling runtime PM to
prevent NULL pointer dereference in runtime PM callbacks.
Reorder pm_runtime_enable() and pm_runtime_forbid() to prevent a
short window where an unnecessary runtime suspend can occur.
Use the devres-managed version to ensure PM runtime is symmetrically
disabled during driver removal for proper cleanup.
Fixes: 891a96f65a ("phy: qcom-qusb2: Add support for runtime PM")
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://patch.msgid.link/20251219085640.114473-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8becf9179a ]
Clear the PCS_TX_SWING_FULL field mask before setting the new value
in PHY_CTRL5 register. Without clearing the mask first, the OR operation
could leave previously set bits, resulting in incorrect register
configuration.
Fixes: 63c85ad0cd ("phy: fsl-imx8mp-usb: add support for phy tuning")
Suggested-by: Leonid Segal <leonids@variscite.com>
Acked-by: Pierluigi Passaro <pierluigi.p@variscite.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://patch.msgid.link/20251219160912.561431-1-stefano.r@variscite.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0732fe787 ]
When device tree lacks optional "xlnx,addrwidth" property, the addr_width
variable remained uninitialized with garbage values, causing incorrect
DMA mask configuration and subsequent probe failure. The fix ensures a
fallback to the default 32-bit address width when this property is missing.
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Fixes: b72db4005f ("dmaengine: vdma: Add 64 bit addressing support to the driver")
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Folker Schwesinger <dev@folker-schwesinger.de>
Link: https://patch.msgid.link/20251021183006.3434495-1-suraj.gupta2@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2efd07a7c3 ]
A use-after-free bug exists in the Tegra ADMA driver when audio streams
are terminated, particularly during XRUN conditions. The issue occurs
when the DMA buffer is freed by tegra_adma_terminate_all() before the
vchan completion tasklet finishes accessing it.
The race condition follows this sequence:
1. DMA transfer completes, triggering an interrupt that schedules the
completion tasklet (tasklet has not executed yet)
2. Audio playback stops, calling tegra_adma_terminate_all() which
frees the DMA buffer memory via kfree()
3. The scheduled tasklet finally executes, calling vchan_complete()
which attempts to access the already-freed memory
Since tasklets can execute at any time after being scheduled, there is
no guarantee that the buffer will remain valid when vchan_complete()
runs.
Fix this by properly synchronizing the virtual channel completion:
- Calling vchan_terminate_vdesc() in tegra_adma_stop() to mark the
descriptors as terminated instead of freeing the descriptor.
- Add the callback tegra_adma_synchronize() that calls
vchan_synchronize() which kills any pending tasklets and frees any
terminated descriptors.
Crash logs:
[ 337.427523] BUG: KASAN: use-after-free in vchan_complete+0x124/0x3b0
[ 337.427544] Read of size 8 at addr ffff000132055428 by task swapper/0/0
[ 337.427562] Call trace:
[ 337.427564] dump_backtrace+0x0/0x320
[ 337.427571] show_stack+0x20/0x30
[ 337.427575] dump_stack_lvl+0x68/0x84
[ 337.427584] print_address_description.constprop.0+0x74/0x2b8
[ 337.427590] kasan_report+0x1f4/0x210
[ 337.427598] __asan_load8+0xa0/0xd0
[ 337.427603] vchan_complete+0x124/0x3b0
[ 337.427609] tasklet_action_common.constprop.0+0x190/0x1d0
[ 337.427617] tasklet_action+0x30/0x40
[ 337.427623] __do_softirq+0x1a0/0x5c4
[ 337.427628] irq_exit+0x110/0x140
[ 337.427633] handle_domain_irq+0xa4/0xe0
[ 337.427640] gic_handle_irq+0x64/0x160
[ 337.427644] call_on_irq_stack+0x20/0x4c
[ 337.427649] do_interrupt_handler+0x7c/0x90
[ 337.427654] el1_interrupt+0x30/0x80
[ 337.427659] el1h_64_irq_handler+0x18/0x30
[ 337.427663] el1h_64_irq+0x7c/0x80
[ 337.427667] cpuidle_enter_state+0xe4/0x540
[ 337.427674] cpuidle_enter+0x54/0x80
[ 337.427679] do_idle+0x2e0/0x380
[ 337.427685] cpu_startup_entry+0x2c/0x70
[ 337.427690] rest_init+0x114/0x130
[ 337.427695] arch_call_rest_init+0x18/0x24
[ 337.427702] start_kernel+0x380/0x3b4
[ 337.427706] __primary_switched+0xc0/0xc8
Fixes: f46b195799 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sheetal <sheetal@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251110142445.3842036-1-sheetal@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7d436a6c1 ]
The max_register field is assigned the size of the register memory
region instead of the offset of the last register.
The result is that reading from the regmap via debugfs can cause
a segmentation fault:
tail /sys/kernel/debug/regmap/xdma.1.auto/registers
Unable to handle kernel paging request at virtual address ffff800082f70000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
[...]
Call trace:
regmap_mmio_read32le+0x10/0x30
_regmap_bus_reg_read+0x74/0xc0
_regmap_read+0x68/0x198
regmap_read+0x54/0x88
regmap_read_debugfs+0x140/0x380
regmap_map_read_file+0x30/0x48
full_proxy_read+0x68/0xc8
vfs_read+0xcc/0x310
ksys_read+0x7c/0x120
__arm64_sys_read+0x24/0x40
invoke_syscall.constprop.0+0x64/0x108
do_el0_svc+0xb0/0xd8
el0_svc+0x38/0x130
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
note: tail[1217] exited with irqs disabled
note: tail[1217] exited with preempt_count 1
Segmentation fault
Fixes: 17ce252266 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49400b701e ]
The driver's existing logic for setting the DMA mask for "marvell,pdma-1.0"
was flawed. It incorrectly relied on pdev->dev->coherent_dma_mask instead
of declaring the hardware's fixed addressing capability. A cleaner and
more correct approach is to define the mask directly based on the hardware
limitations.
The MMP/PXA PDMA controller is a 32-bit DMA engine. This is supported by
datasheets and various dtsi files for PXA25x, PXA27x, PXA3xx, and MMP2,
all of which are 32-bit systems.
This patch simplifies the driver's logic by replacing the 'u64 dma_mask'
field with a simpler 'u32 dma_width' to store the addressing capability
in bits. The complex if/else block in probe() is then replaced with a
single, clear call to dma_set_mask_and_coherent(). This sets a fixed
32-bit DMA mask for "marvell,pdma-1.0" and a 64-bit mask for
"spacemit,k1-pdma," matching each device's hardware capabilities.
Finally, this change also works around a specific build error encountered
with clang-20 on x86_64 allyesconfig. The shift-count-overflow error is
caused by a known clang compiler issue where the DMA_BIT_MASK(n) macro's
ternary operator is not correctly evaluated in static initializers. By
moving the macro's evaluation into the probe() function, the driver avoids
this compiler bug.
Fixes: 5cfe585d86 ("dmaengine: mmp_pdma: Add SpacemiT K1 PDMA support with 64-bit addressing")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/lkml/CA+G9fYsPcMfW-e_0_TRqu4cnwqOqYF3aJOeKUYk6Z4qRStdFvg@mail.gmail.com
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5811e6297 ]
If the pre-operation file size is read before locking the inode and
quiescing O_DIRECT writes, then nfs_truncate_last_folio() might end up
overwriting valid file data.
Fixes: b1817b18ff ("NFS: Protect against 'eof page pollution'")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e8e590fd6 ]
Add the missing @align and @memmap_on_memory fields to kerneldoc comment
header for struct dev_dax.
Also, some other fields were followed by '-' and others by ':'. Fix all
to be ':' for actual kerneldoc compliance.
Link: https://lkml.kernel.org/r/20260110191804.5739-1-john@groves.net
Fixes: 33cf94d717 ("device-dax: make align a per-device property")
Fixes: 4eca0ef49a ("dax/kmem: allow kmem to add memory with memmap_on_memory")
Signed-off-by: John Groves <john@groves.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f171b55f14 ]
Commit 6faea3422e ("arch, mm: streamline HIGHMEM freeing") overzealously
removed mem_init_free_highmem() function that beside freeing high memory
pages checked for CPU support for high memory as a prerequisite.
Partially restore mem_init_free_highmem() with a new highmem_init() name
and make it discard high memory in case there is no CPU support for it.
Link: https://lkml.kernel.org/r/20251231105701.519711-1-rppt@kernel.org
Fixes: 6faea3422e ("arch, mm: streamline HIGHMEM freeing")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Jonas Jelonek <jelonek.jonas@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2fb7836b0 ]
Patch series "mm kernel-doc fixes".
Here are kernel-doc fixes for mm subsystem. I'm also including textsearch
fix since there's currently no maintainer for include/linux/textsearch.h
(get_maintainer.pl only shows LKML).
This patch (of 4):
Sphinx reports kernel-doc warning:
WARNING: ./include/linux/sched/mm.h:332 function parameter 'flags' not described in 'memalloc_flags_save'
Describe @flags to fix it.
Link: https://lkml.kernel.org/r/20251219014006.16328-2-bagasdotme@gmail.com
Link: https://lkml.kernel.org/r/20251219014006.16328-3-bagasdotme@gmail.com
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Fixes: 3f6d5e6a46 ("mm: introduce memalloc_flags_{save,restore}")
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2426a211d ]
The user mode queue keeps a pointer to the most recent fence in
userq->last_fence. This pointer holds an extra dma_fence reference.
When the queue is destroyed, we free the fence driver and its xarray,
but we forgot to drop the last_fence reference.
Because of the missing dma_fence_put(), the last fence object can stay
alive when the driver unloads. This leaves an allocated object in the
amdgpu_userq_fence slab cache and triggers
This is visible during driver unload as:
BUG amdgpu_userq_fence: Objects remaining on __kmem_cache_shutdown()
kmem_cache_destroy amdgpu_userq_fence: Slab cache still has objects
Call Trace:
kmem_cache_destroy
amdgpu_userq_fence_slab_fini
amdgpu_exit
__do_sys_delete_module
Fix this by putting userq->last_fence and clearing the pointer during
amdgpu_userq_fence_driver_free().
This makes sure the fence reference is released and the slab cache is
empty when the module exits.
v2: Update to only release userq->last_fence with dma_fence_put()
(Christian)
Fixes: edc762a51c ("drm/amdgpu/userq: move some code around")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8e051e38a8)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18dbcfb46f ]
Each queue of the process is individually removed and there is not need
to suspend whole mes. Suspending mes stops kernel mode queues also
causing unnecessary timeouts when running mixed work loads
Fixes: 079ae5118e ("drm/amdkfd: fix suspend/resume all calls in mes based eviction path")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4765
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3fd20580b9)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a1253ba50 ]
[Why]
The PSR message was moved in commit 4321742c39 ("drm/amd/display:
Move PSR support message into amdgpu_dm"). This message however shows
for every single link without showing which link is which. This can
send a confusing message to the user.
[How]
Add link name into the message.
Fixes: 4321742c39 ("drm/amd/display: Move PSR support message into amdgpu_dm")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99f77f6229)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cb6278b44 ]
When driver not support atomic, fb using plane->fb rather than
plane->state->fb.
Fixes: fe151ed7af ("drm/amdgpu: add generic display panic helper code")
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2f2a72de67)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46378ab9fc ]
The word length is the physical width of the channel slots. So the
hw_params would misconfigure when format width and physical width
doesn't match. Like S24_LE which has data width of 24 bits but physical
width of 32 bits. So if using asymmetric formats you will get a lot of
noise.
Fixes: 689c7655b5 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-4-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be7664c81d ]
The "snd_soc_component" in "adcx140_priv" was only used once but never
set. It was only used for reaching "dev" which is already present in
"adcx140_priv".
Fixes: 4e82971f7b ("ASoC: tlv320adcx140: Add a new kcontrol")
Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-2-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 390caeed08 ]
The CS42L43 codec's load detection can return different impedance values
that map to either HEADPHONE or LINEOUT jack types. However, the
soc_jack_pins array only maps SND_JACK_HEADPHONE to the "Headphone" DAPM
pin, not SND_JACK_LINEOUT.
When headphones are detected with an impedance that maps to LINEOUT
(such as impedance value 0x2), the driver reports SND_JACK_LINEOUT.
Since this doesn't match the jack pin mask, the "Headphone" DAPM pin
is not activated, and no audio is routed to the headphone outputs.
Fix by adding SND_JACK_LINEOUT to the Headphone pin mask, so that both
headphone and line-out detection properly enable the headphone output
path.
This fixes no audio output on devices like the Lenovo ThinkPad P16 Gen 3
where headphones are detected with LINEOUT impedance.
Fixes: d74bad3b74 ("ASoC: intel: sof_sdw_cs42l43: Create separate jacks for hp and mic")
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Cole Leavitt <cole@unwrap.rs>
Link: https://patch.msgid.link/20260114025518.28519-1-cole@unwrap.rs
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d235649558 ]
RSS configuration requires a valid RX indirection table. When the device
reports a single receive queue, rndis_filter_device_add() does not
allocate an indirection table, accepting RSS hash key updates in this
state leads to a hang.
Fix this by gating netvsc_set_rxfh() on ndc->rx_table_sz and return
-EOPNOTSUPP when the table is absent. This aligns set_rxfh with the device
capabilities and prevents incorrect behavior.
Fixes: 962f3fee83 ("netvsc: add ethtool ops to get/set RSS key")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1768212093-1594-1-git-send-email-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a0243c402 ]
Change the test suite name string to "snd-hda-cirrus-scodec-test".
It was incorrectly named "snd-hda-scodec-cs35l56-test", a leftover
from when the code under test was actually in the cs35l56 driver.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Link: https://patch.msgid.link/20260113134056.619051-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5e96e54ec ]
Set gpiochip parent to the struct device of the dummy GPIO driver
so that the software node will be associated with the GPIO chip.
The recent commit e5d527be7e ("gpio: swnode: don't use the
swnode's name as the key for GPIO lookup") broke cirrus_scodec_test,
because the software node no longer gets associated with the GPIO
driver by name.
Instead, setting struct gpio_chip.parent to the owning struct device
will find the node using a normal fwnode lookup.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Link: https://patch.msgid.link/20260113130954.574670-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
