VFIO EEH recovery for PCI passthrough devices fails on PowerNV and pseries
platforms due to missing host-side PE bridge reconfiguration. In the
current implementation, eeh_pe_configure() only performs RTAS or OPAL-based
bridge reconfiguration for native host devices, but skips it entirely for
PEs managed through VFIO in guest passthrough scenarios.
This leads to incomplete EEH recovery when a PCI error affects a
passthrough device assigned to a QEMU/KVM guest. Although VFIO triggers the
EEH recovery flow through VFIO_EEH_PE_ENABLE ioctl, the platform-specific
bridge reconfiguration step is silently bypassed. As a result, the PE's
config space is not fully restored, causing subsequent config space access
failures or EEH freeze-on-access errors inside the guest.
This patch fixes the issue by ensuring that eeh_pe_configure() always
invokes the platform's configure_bridge() callback (e.g.,
pseries_eeh_phb_configure_bridge) even for VFIO-managed PEs. This ensures
that RTAS or OPAL calls to reconfigure the PE bridge are correctly issued
on the host side, restoring the PE's configuration space after an EEH
event.
This fix is essential for reliable EEH recovery in QEMU/KVM guests using
VFIO PCI passthrough on PowerNV and pseries systems.
Tested with:
- QEMU/KVM guest using VFIO passthrough (IBM Power9,(lpar)Power11 host)
- Injected EEH errors with pseries EEH errinjct tool on host, recovery
verified on qemu guest.
- Verified successful config space access and CAP_EXP DevCtl restoration
after recovery
Fixes: 212d16cdca ("powerpc/eeh: EEH support for VFIO PCI device")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250508062928.146043-1-nnmlinux@linux.ibm.com
Building vdso32 on power10 with pcrel leads to following errors:
VDSO32A arch/powerpc/kernel/vdso/gettimeofday-32.o
arch/powerpc/kernel/vdso/gettimeofday.S: Assembler messages:
arch/powerpc/kernel/vdso/gettimeofday.S:40: Error: syntax error; found `@', expected `,'
arch/powerpc/kernel/vdso/gettimeofday.S:71: Info: macro invoked from here
arch/powerpc/kernel/vdso/gettimeofday.S:40: Error: junk at end of line: `@notoc'
arch/powerpc/kernel/vdso/gettimeofday.S:71: Info: macro invoked from here
...
make[2]: *** [arch/powerpc/kernel/vdso/Makefile:85: arch/powerpc/kernel/vdso/gettimeofday-32.o] Error 1
make[1]: *** [arch/powerpc/Makefile:388: vdso_prepare] Error 2
Once the above is fixed, the following happens:
VDSO32C arch/powerpc/kernel/vdso/vgettimeofday-32.o
cc1: error: '-mpcrel' requires '-mcmodel=medium'
make[2]: *** [arch/powerpc/kernel/vdso/Makefile:89: arch/powerpc/kernel/vdso/vgettimeofday-32.o] Error 1
make[1]: *** [arch/powerpc/Makefile:388: vdso_prepare] Error 2
make: *** [Makefile:251: __sub-make] Error 2
Make sure pcrel version of CFUNC() macro is used only for powerpc64
builds and remove -mpcrel for powerpc32 builds.
Fixes: 7e3a68be42 ("powerpc/64: vmlinux support building with PCREL addresing")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1fa3453f07d42a50a70114da9905bf7b73304fca.1747073669.git.christophe.leroy@csgroup.eu
Fix the compile-time warning
drivers/gpu/drm/mgag200/mgag200_ddc.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250612085308.203861-1-tzimmermann@suse.de
Fix the compile-time warning
drivers/gpu/drm/ast/ast_mode.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250612084257.200907-1-tzimmermann@suse.de
BT.601 weights RGB components by certain factors to convert the
color to grayscale. Normalize the constants to 256 instead of 10.
Allows for slightly more precise rounding. The division by 256 can
be compiled as an 8-bit shift, which might be faster on some hardware.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250603161158.423962-1-tzimmermann@suse.de
Use ZONEFS_SUPER_SIZE constant instead of PAGE_SIZE allocating memory for
reading the super block in zonefs_read_super().
While PAGE_SIZE technically isn't incorrect as Linux doesn't support pages
smaller than 4k ZONEFS_SUPER_SIZE is semantically more correct.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Simplify the scheduler by making CONFIG_SMP=y code in the stop-CPU
scheduling class unconditional.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-36-mingo@kernel.org
Simplify the scheduler by making CONFIG_SMP=y primitives and data
structures unconditional in the RT policies scheduler.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-29-mingo@kernel.org
Simplify the scheduler by making the CONFIG_SMP=y version of
idle_thread_set_boot_cpu() unconditional.
Note that idle_thread_set_boot_cpu() is already conditional
on CONFIG_GENERIC_SMP_IDLE_THREAD, which most architectures
select unconditionally on both UP and SMP kernels.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-28-mingo@kernel.org
Simplify the scheduler by making CONFIG_SMP=y data structure
of rq->hrtick_csd unconditional.
Adjust hrtick_start() accordingly, which was split due to the
::hrtick_csd asymmetry and use the SMP version there too.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-23-mingo@kernel.org
Simplify the scheduler by making the CONFIG_SMP=y primitives
of is_percpu_thread() and scheduler_ipi() unconditional.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-22-mingo@kernel.org
Simplify the scheduler by making CONFIG_SMP=y primitives and data
structures unconditional.
Introduce transitory wrappers for functionality not yet converted to SMP.
Note that this patch is pretty large, because there's no clear separation
between various aspects of the SMP scheduler, it's basically a huge block
of #ifdef CONFIG_SMP. A fair amount of it has to be switched on for it to
boot and work on UP systems.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-21-mingo@kernel.org
Simplify the scheduler by making CONFIG_SMP=y primitives and data
structures unconditional.
Unconditionally build kernel/sched/topology.c and the main sched-domains
locking primitives.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250528080924.2273858-20-mingo@kernel.org
Set GT min frequency to 1200Mhz once driver load is complete.
v2: Review comments (Rodrigo)
v3: Apply Wa earlier so user_req_min is not clobbered.
v4: Apply to all GTs (Lucas)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250612-wa-14022085890-v4-3-94ba5dcc1e30@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
