* Include modifications made to commit "xfs: load uncached unlinked inodes
into memory on demand" (Commit ID: 68b957f64f)
which address review comments provided by Dave Chinner.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZRPtowAKCRAH7y4RirJu
9EcNAQDnuVtf89FL0Qqqtho5TeK2UO4JhEcTWI4Wj1d9w7h4lAEA5ZTYu8oJDg0k
zoTXgr9sbpzcf53fgY0hwqPVjdV8dwU=
=WkWe
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.6-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Chandan Babu:
- fix for commit 68b957f64f ("xfs: load uncached unlinked inodes into
memory on demand") which address review comments provided by Dave
Chinner
* tag 'xfs-6.6-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix reloading entire unlinked bucket lists
struct pci_dev contains two flags which govern whether the device may
suspend to D3cold:
* no_d3cold provides an opt-out for drivers (e.g. if a device is known
to not wake from D3cold)
* d3cold_allowed provides an opt-out for user space (default is true,
user space may set to false)
Since commit 9d26d3a8f1 ("PCI: Put PCIe ports into D3 during suspend"),
the user space setting overwrites the driver setting. Essentially user
space is trusted to know better than the driver whether D3cold is
working.
That feels unsafe and wrong. Assume that the change was introduced
inadvertently and do not overwrite no_d3cold when d3cold_allowed is
modified. Instead, consider d3cold_allowed in addition to no_d3cold
when choosing a suspend state for the device.
That way, user space may opt out of D3cold if the driver hasn't, but it
may no longer force an opt in if the driver has opted out.
Fixes: 9d26d3a8f1 ("PCI: Put PCIe ports into D3 during suspend")
Link: https://lore.kernel.org/r/b8a7f4af2b73f6b506ad8ddee59d747cbf834606.1695025365.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org # v4.8+
In preparation for fixing the init/teardown of the 'sanitize' workqueue
and sysfs notification mechanism, arrange for cxl_mbox_sanitize_work()
to be the single location where the sysfs attribute is notified. With
that change there is no distinction between polled mode and interrupt
mode. All the interrupt does is accelerate the polling interval.
The change to check for "mds->security.sanitize_node" under the lock is
there to ensure that the interrupt, the work routine and the
setup/teardown code can all have a consistent view of the registered
notifier and the workqueue state. I.e. the expectation is that the
interrupt is live past the point that the sanitize sysfs attribute is
published, and it may race teardown, so it must be consulted under a
lock. Given that new locking requirement, cxl_pci_mbox_irq() is moved
from hard to thread irq context.
Lastly, some opportunistic replacements of
"queue_delayed_work(system_wq, ...)", which is just open coded
schedule_delayed_work(), are included.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Mark Blakeney reported that when suspending system with a Thunderbolt
dock connected and then unplugging the dock before resume (which is
pretty normal flow with laptops), resuming takes long time.
What happens is that the PCIe link from the root port to the PCIe switch
inside the Thunderbolt device does not train (as expected, the link is
unplugged):
pcieport 0000:00:07.2: restoring config space at offset 0x24 (was 0x3bf12001, writing 0x3bf12001)
pcieport 0000:00:07.0: waiting 100 ms for downstream link
pcieport 0000:01:00.0: not ready 1023ms after resume; giving up
However, at this point we still try to resume the devices below that
unplugged link:
pcieport 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
...
pcieport 0000:01:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0)
...
pcieport 0000:02:02.0: waiting 100 ms for downstream link, after activation
And this is the link from PCIe switch downstream port to the xHCI on the
dock:
xhci_hcd 0000:03:00.0: not ready 65535ms after resume; giving up
xhci_hcd 0000:03:00.0: Unable to change power state from D3cold to D0, device inaccessible
xhci_hcd 0000:03:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x1ff)
This ends up slowing down the resume time considerably. For this reason
mark these devices as disconnected if the link above them did not train
properly.
Fixes: e8b908146d ("PCI/PM: Increase wait time after resume")
Link: https://lore.kernel.org/r/20230918053041.1018876-1-mika.westerberg@linux.intel.com
Reported-by: Mark Blakeney <mark.blakeney@bullet-systems.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217915
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.4+
Previously of_pci_make_dev_node() leaked a cset if it failed to create a
device node for the PCI device with of_changeset_create_node().
Destroy the cset if of_changeset_create_node() fails.
Fixes: 407d1a5192 ("PCI: Create device tree node for bridge")
Link: https://lore.kernel.org/r/1696007417-42059-1-git-send-email-lizhi.hou@amd.com
Reported-by: Herve Codina <herve.codina@bootlin.com>
Closes: https://lore.kernel.org/all/20230911171319.495bb837@bootlin.com/
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
of_pci_prop_intr_map() uses uninitialized addr_sz[] values if
of_irq_parse_raw() fails, which leads to intermittent crashes.
Clear addr_sz[] before use so we never use uninitialized elements.
If no valid IRQs are parsed, don't bother adding the interrupt-map
property.
Fixes: 407d1a5192 ("PCI: Create device tree node for bridge")
Link: https://lore.kernel.org/r/1696007448-42127-1-git-send-email-lizhi.hou@amd.com
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: https://lore.kernel.org/all/20230911154856.000076c3@Huawei.com/
Reported-by: Herve Codina <herve.codina@bootlin.com>
Closes: https://lore.kernel.org/all/20230911171319.495bb837@bootlin.com/
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
[bhelgaas: commit log, add similar report from Herve]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Commit 31345a0f59 ("MAINTAINERS: Replace my email address") added 13
instances of ...@broadcom.com and one of only ...@broadcom. I didn't
double check if Broadcom really owns that TLD, but git send-email
doesn't accept it, so add ".com" to that one bogous(?) instance.
Fixes: 31345a0f59 ("MAINTAINERS: Replace my email address")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If, for any reason, the open-coded arithmetic causes a wraparound, the
protection that `struct_size()` adds against potential integer overflows
is defeated. Fix this by hardening call to `struct_size()` with `size_add()`.
Fixes: 40e1a70b4a ("drm: Add GUD USB Display driver")
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZQSlyHKPdw/zsy4c@work
Signed-off-by: Kees Cook <keescook@chromium.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We need to prefer more robust and less ambiguous string interfaces.
`obj_desc->(type|label)` are expected to be NUL-terminated strings as
per "include/linux/fsl/mc.h +143"
| ...
| * struct fsl_mc_obj_desc - Object descriptor
| * @type: Type of object: NULL terminated string
| ...
It seems `cmd_params->obj_type` is also expected to be a NUL-terminated string.
A suitable replacement is `strscpy_pad` due to the fact that it
guarantees NUL-termination on the destination buffer whilst keeping the
NUL-padding behavior that `strncpy` provides.
Padding may not strictly be necessary but let's opt to keep it as this
ensures no functional change.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230912-strncpy-drivers-bus-fsl-mc-dprc-c-v1-1-cdb56aa3f4f4@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Given that any particular put_device() could be the final put of the
device, the fact that there are usages of cxlds->dev after
put_device(cxlds->dev) is a red flag. Drop the reference counting since
the device is pinned by being registered and will not be unregistered
without triggering the driver + workqueue to shutdown.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Golang symbols in ELF files are different from C/C++
which contains special characters like '*', '(' and ')'.
With generics, things get more complicated, there are
symbols like:
github.com/cilium/ebpf/internal.(*Deque[go.shape.interface { Format(fmt.State, int32); TypeName() string;github.com/cilium/ebpf/btf.copy() github.com/cilium/ebpf/btf.Type}]).Grow
Matching such symbols using `%m[^\n]` in sscanf, this
excludes newline which typically does not appear in ELF
symbols. This should work in most use-cases and also
work for unicode letters in identifiers. If newline do
show up in ELF symbols, users can still attach to such
symbol by specifying bpf_uprobe_opts::func_name.
A working example can be found at this repo ([0]).
[0]: https://github.com/chenhengqi/libbpf-go-symbols
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230929155954.92448-1-hengqi.chen@gmail.com
Looks like I lost that by accident, add it back.
Fixes: 076fc8775d ("wifi: cfg80211: remove wdev mutex")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Somehow, I managed to botch this and pretty much completely break
wifi. My original patch did contain these changes, but I seem to
have lost them before sending to the list. Fix it now.
Reported-and-tested-by: Kalle Valo <kvalo@kernel.org>
Fixes: 6c02fab724 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Inspired by recent enhancements to comments in kernel/time/tick-sched.c,
go through the entire file and fix/unify its comments:
- Fix over a dozen typos, spelling mistakes & cases of bad grammar.
- Re-phrase sentences that I needed to read three times to understand.
[ I used the following arbitrary rule-of-thumb:
- if I had to read a comment twice, it was usually my fault,
- if I had to read it a third time, it was the comment's fault. ]
- Comma updates:
- Add commas where needed
- Remove commas where not needed
- In cases where a comma is optional, choose one variant and try to
standardize it over similar sentences in the file.
- Standardize on standalone 'NOHZ' spelling in free-flowing comments:
s/nohz/NOHZ
s/no idle tick/NOHZ
Still keep 'dynticks' as a popular synonym.
- Standardize on referring to variable names within free-flowing
comments with the "'var'" nomenclature, and function names as
"function_name()".
- Standardize on '64-bit' and '32-bit':
s/32bit/32-bit
s/64bit/64-bit
- Standardize on 'IRQ work':
s/irq work/IRQ work
- A few other tidyups I probably missed to list.
No change in functionality intended - other than one small change to
a syslog output string.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/ZRVCNeMcSQcXS36N@gmail.com
PARF_SLV_ADDR_SPACE_SIZE_2_3_3 is used by qcom_pcie_post_init_2_3_3().
This PCIe slave address space size register offset is 0x358 but was
incorrectly changed to 0x16c by 39171b33f6 ("PCI: qcom: Remove PCIE20_
prefix from register definitions").
This prevented access to slave address space registers like iATU, etc.,
so the IPQ8074 PCIe controller was not enumerated.
Revert back to the correct 0x358 offset and remove the unused
PARF_SLV_ADDR_SPACE_SIZE_2_3_3.
Fixes: 39171b33f6 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
Link: https://lore.kernel.org/r/20230919102948.1844909-1-quic_srichara@quicinc.com
Tested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: stable@vger.kernel.org # v6.4+
A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.
In more details:
- Add missing additionalProperties on child nodes to the pata-common DT
bindings (Rob).
- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas).
- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias).
- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me).
- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk driver
resume operation not being synchronized with libata EH port resume
handling. This is addressed by changing the scsi disk driver disk
start/stop control to allow libata to execute disk suspend (spin
down) and resume (spin up) on its own during system suspend/resume.
Runtime suspend/resume control remains with the SCSI disk driver.
Other fixes include:
- Fix libata power management request issuing to avoid races.
- Establish a link between ATA ports and SCSI devices to order PM
operations.
- Fix device removal to avoid issues with driver rmmod removal.
- Fix synchronization of libata device rescan and SCSI disk resume
operation.
- Remove libsas PM operations as suspend/resume is handled directly
by the sas controller resume.
- Fix the SCSI disk driver to not issue commands to suspended disks,
thus avoiding potential system lock-up on resume.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZRbR0gAKCRDdoc3SxdoY
dkArAP9PFTRgsXEwfE7arBXCwQqXj/W0R2KgKug7Fno+SoQLnAD/ZKe2TR50uwxr
9mwYROdMgi50T9ax1RX1jWA0npGXmQg=
=cFzG
-----END PGP SIGNATURE-----
Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.
In more detail:
- Add missing additionalProperties on child nodes to the pata-common
DT bindings (Rob)
- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas)
- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias)
- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me)
- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk
driver resume operation not being synchronized with libata EH port
resume handling.
This is addressed by changing the scsi disk driver disk start/stop
control to allow libata to execute disk suspend (spin down) and
resume (spin up) on its own during system suspend/resume. Runtime
suspend/resume control remains with the SCSI disk driver.
Other fixes include:
- Fix libata power management request issuing to avoid races
- Establish a link between ATA ports and SCSI devices to order PM
operations
- Fix device removal to avoid issues with driver rmmod removal
- Fix synchronization of libata device rescan and SCSI disk resume
operation
- Remove libsas PM operations as suspend/resume is handled
directly by the sas controller resume
- Fix the SCSI disk driver to not issue commands to suspended
disks, thus avoiding potential system lock-up on resume"
* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-eh: Fix compilation warning in ata_eh_link_report()
ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
scsi: sd: Do not issue commands to suspended disks on shutdown
ata: libata-core: Do not register PM operations for SAS ports
ata: libata-scsi: Fix delayed scsi_rescan_device() execution
scsi: Do not attempt to rescan suspended devices
ata: libata-scsi: Disable scsi device manage_system_start_stop
scsi: sd: Differentiate system and runtime start/stop management
ata: libata-scsi: link ata port and scsi device
ata: libata-core: Fix port and device removal
ata: libata-core: Fix ata_port_request_pm() locking
ata: libata-sata: increase PMP SRST timeout to 10s
ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
-----BEGIN PGP SIGNATURE-----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=tdkz
-----END PGP SIGNATURE-----
Merge tag 'block-6.6-2023-09-28' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Just two minor comment / documentation fixes for the block side"
* tag 'block-6.6-2023-09-28' of git://git.kernel.dk/linux:
block: fix kernel-doc for disk_force_media_change()
block: correct stale comment in rq_qos_wait
-----BEGIN PGP SIGNATURE-----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=fAm6
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.6-2023-09-28' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"A single fix going to stable for the IORING_OP_LINKAT flag handling"
* tag 'io_uring-6.6-2023-09-28' of git://git.kernel.dk/linux:
io_uring/fs: remove sqe->rw_flags checking from LINKAT
atmel,rtt-rtc-time-reg is a mandatory property and encodes the GPBR
register used to store the time base when the RTT is used as an RTC.
Align the RTT with what's currently done for sam9x60ek and sama7g5ek,
and enable it by default even if RTC is also enabled.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
[nicolas.ferre@microchip.com: adapt to newer kernel]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230928143644.208515-1-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmUWfrsACgkQu+CwddJF
iJo6+QgAnn3klZX5wOfH93tdlOz2TNy8QVSmNuITDKThLJg9r8YkQJdp6NYHR0Rc
vrbZ2pMqF/LQ/LW49uZahQwVi7811psfU3PqbSC3CRtUYq0RUMu5PaeItvRp4S5n
2zYiWVSNGfSmG4jQm2L2nMjDRK8m3oLKwuxKejv3UQLDZ5U1Fh36k75lZK1PERmu
+cBQATtncj4N1rF0eY8mif3ctqqkVqz79t/nU/FCBx0+v3s4wTzYB1y8l5FEH2cM
iU4A4jsZe147DxHadUQF2ahnj6oaOacgtg846WN5P73BjiRhdrJaTS8HSeAS/RIo
e/PpbLzOFp4Rz+2u1Me7nFK64qFjyw==
=+WB7
-----END PGP SIGNATURE-----
Merge tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- stable fix to prevent list corruption when destroying caches with
leftover objects (Rafael Aquini)
- fix for a gotcha in kmalloc_size_roundup() when calling it with too
high size, discovered when recently a networking call site had to be
fixed for a different issue (David Laight)
* tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: kmalloc_size_roundup() must not return 0 for non-zero size
mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy()
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
`gate_buf` should always be NUL-terminated and does not require
NUL-padding. It is used as a string arg inside an argv array given to
`run_helper()`. Due to this, let's use `strscpy` as it guarantees
NUL-terminated on the destination buffer preventing potential buffer
overreads [2].
This exact invocation was changed from `strcpy` to `strncpy` in commit
7879b1d94b ("um,ethertap: use strncpy") back in 2015. Let's continue
hardening our `str*cpy` apis and use the newer and safer `strscpy`!
Link: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings[1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230911-strncpy-arch-um-os-linux-drivers-ethertap_user-c-v1-1-d9e53f52ab32@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
atomic_t variables are currently used to implement reference counters
with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows and
underflows. This is important since overflows and underflows can lead
to use-after-free situation and be exploitable.
The variable group_info.usage is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
**Important note for maintainers:
Some functions from refcount_t API defined in refcount.h have different
memory ordering guarantees than their atomic counterparts. Please check
Documentation/core-api/refcount-vs-atomic.rst for more information.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in some
rare cases it might matter. Please double check that you don't have
some undocumented memory guarantees for this variable usage.
For the group_info.usage it might make a difference in following places:
- put_group_info(): decrement in refcount_dec_and_test() only
provides RELEASE ordering and ACQUIRE ordering on success vs. fully
ordered atomic counterpart
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Link: https://lore.kernel.org/r/20230818041456.gonna.009-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
MAINTAINERS:
- add Danilo for nouveau
ivpu:
- Add PCI ids for Arrow Lake
- Fix memory corruption during IPC
- Avoid dmesg flooding
- 40xx: Wait for clock resource
- 40xx: Fix interrupt usage
- 40xx: Support caching when loading firmware
i915:
- Fix a panic regression on gen8_ggtt_insert_entries
- Fix load issue due to reservation address in ggtt_reserve_guc_top
- Fix a possible deadlock with guc busyness worker
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmUWK6IACgkQDHTzWXnE
hr5P2g/+PmspwKY7dqEy+SP8U3RCk4qD4+r0L8q//hytq8Ur1MIwXwNTRavOXR2M
KPSCTHzYqQwxVi6J23BgLhW731UK3sLsxdTlxYL+dANEt5R4EXWkh4Ca55wQ4yVE
I504J6uwIwd9mkFjqC5Xb1U4OYXuTK345HS1vcybMp2ryrM3F8r59ThXwYF5aoWt
3QePmshb7QLwIdtV97nlsyssqzsDWkoWyqwPySfxtx5aA3i5NBUW8NVC623+iEw7
FFFtfV8TJ3vOLHcDAfG/y/fhHh/osU7gF8Ra8g1Pcvp1cBALXy5dn2XAavckuBpZ
wdoijySix11c+Gp6j3YJkWtB55hJnCJs3xoM/x/X9TtSbiqVFcZdbzV15HWdvcUN
4shaVualmTcbG/TdiGtswWSmHgUhNKo1KGOjL7+RYjntb8EPfypsa3w+blx6u1Bn
mzTNwQ2iI5BbaOEXkR+pnoT34GU+VZ6+Lh2U1dhVJv2YzZG+MaxZXOLg2Yeff1B0
9Cf6oq77xM5b0eAv7b9St7MRUpCZZztnN8p+qiRu5kisqttApqzbewCuPQsY/eHb
wPZR2kKP3YEuU/or8RNEqXu5lChna0MjcDS7vvY/npJVwTrb+IGwupvrMHjIg5/N
I5TbvyJ5Xvt/sL2UO/90llIY39G1ziHFuqrdL1j3/zbqtG8OQKE=
=7M9M
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-09-29' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular pull, this feel suspiciously light so I expect next week might
be a bit heavier? Let's see how we go. This is from a code point of
view ivpu and i915 fixes.
The only other patch is adding Danilo Krummrich to the nouveau
maintainers, he's agreed to take on more of the roll after Ben
retired.
MAINTAINERS:
- add Danilo for nouveau
ivpu:
- Add PCI ids for Arrow Lake
- Fix memory corruption during IPC
- Avoid dmesg flooding
- 40xx: Wait for clock resource
- 40xx: Fix interrupt usage
- 40xx: Support caching when loading firmware
i915:
- Fix a panic regression on gen8_ggtt_insert_entries
- Fix load issue due to reservation address in ggtt_reserve_guc_top
- Fix a possible deadlock with guc busyness worker"
* tag 'drm-fixes-2023-09-29' of git://anongit.freedesktop.org/drm/drm:
accel/ivpu: Use cached buffers for FW loading
accel/ivpu/40xx: Fix missing VPUIP interrupts
accel/ivpu/40xx: Disable frequency change interrupt
accel/ivpu/40xx: Ensure clock resource ownership Ack before Power-Up
accel/ivpu: Don't flood dmesg with VPU ready message
accel/ivpu: Do not use wait event interruptible
MAINTAINERS: update nouveau maintainers
i915/guc: Get runtime pm in busyness worker only if already active
drm/i915/gt: Fix reservation address in ggtt_reserve_guc_top
i915: Limit the length of an sg list to the requested length
accel/ivpu: Add Arrow Lake pci id
The Anbernic RG-Nano is a small portable game device based on the
Allwinner V3s SoC. It has GPIO buttons on the face and side for
input, a single mono speaker, a 240x240 SPI controlled display, a USB-C
OTG port, an SD card slot for booting, and 64MB of RAM included in the
SoC. There does not appear to be a crystal feeding the internal RTC so
it does not keep proper time (for me it ran 8 hours slow in a 24 hour
period). External RTC works just fine.
Working/Tested:
- SDMMC
- UART (for debugging)
- Buttons
- Charging/battery/PMIC
- Speaker
- RTC (external RTC)
- USB
- Display
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230929144441.3409-5-macroalpha82@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Anbernic RG-Nano is a portable handheld console from Anbernic which
uses the Allwinner V3s SoC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230929144441.3409-4-macroalpha82@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Add the EHCI and OHCI controller to the Allwinner v3s to support using
USB in host mode.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230929144441.3409-3-macroalpha82@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Add pinctrl nodes for pwm0 and pwm1.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230929144441.3409-2-macroalpha82@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
With the BSS handled generically via the new filesz/memsz mismatch
handling logic in elf_load(), elf_bss no longer needs to be tracked.
Drop the variable.
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Suggested-by: Eric Biederman <ebiederm@xmission.com>
Tested-by: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20230929032435.2391507-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Implement a helper elf_load() that wraps elf_map() and performs all
of the necessary work to ensure that when "memsz > filesz" the bytes
described by "memsz > filesz" are zeroed.
An outstanding issue is if the first segment has filesz 0, and has a
randomized location. But that is the same as today.
In this change I replaced an open coded padzero() that did not clear
all of the way to the end of the page, with padzero() that does.
I also stopped checking the return of padzero() as there is at least
one known case where testing for failure is the wrong thing to do.
It looks like binfmt_elf_fdpic may have the proper set of tests
for when error handling can be safely completed.
I found a couple of commits in the old history
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
that look very interesting in understanding this code.
commit 39b56d902bf3 ("[PATCH] binfmt_elf: clearing bss may fail")
commit c6e2227e4a3e ("[SPARC64]: Missing user access return value checks in fs/binfmt_elf.c and fs/compat.c")
commit 5bf3be033f50 ("v2.4.10.1 -> v2.4.10.2")
Looking at commit 39b56d902bf3 ("[PATCH] binfmt_elf: clearing bss may fail"):
> commit 39b56d902bf35241e7cba6cc30b828ed937175ad
> Author: Pavel Machek <pavel@ucw.cz>
> Date: Wed Feb 9 22:40:30 2005 -0800
>
> [PATCH] binfmt_elf: clearing bss may fail
>
> So we discover that Borland's Kylix application builder emits weird elf
> files which describe a non-writeable bss segment.
>
> So remove the clear_user() check at the place where we zero out the bss. I
> don't _think_ there are any security implications here (plus we've never
> checked that clear_user() return value, so whoops if it is a problem).
>
> Signed-off-by: Pavel Machek <pavel@suse.cz>
> Signed-off-by: Andrew Morton <akpm@osdl.org>
> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It seems pretty clear that binfmt_elf_fdpic with skipping clear_user() for
non-writable segments and otherwise calling clear_user(), aka padzero(),
and checking it's return code is the right thing to do.
I just skipped the error checking as that avoids breaking things.
And notably, it looks like Borland's Kylix died in 2005 so it might be
safe to just consider read-only segments with memsz > filesz an error.
Reported-by: Sebastian Ott <sebott@redhat.com>
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Closes: https://lkml.kernel.org/r/20230914-bss-alloc-v1-1-78de67d2c6dd@weissschuh.net
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/87sf71f123.fsf@email.froward.int.ebiederm.org
Tested-by: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20230929032435.2391507-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Introduce device address in hardcode TCM table.
Device address is used for address translation.
Also, previous method(hack) to mask few bits from address
to achieve address translation is removed
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20230925172648.2339048-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
- fix a potential spinlock deadlock in gpio-timberdale
- mark the gpio-pmic-eic-sprd driver as one that can sleep
-----BEGIN PGP SIGNATURE-----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=kFxF
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential spinlock deadlock in gpio-timberdale
- mark the gpio-pmic-eic-sprd driver as one that can sleep
* tag 'gpio-fixes-for-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip
gpio: timberdale: Fix potential deadlock on &tgpio->lock
The Realtek SoC USB2 and USB3 PHY Transceivers are only present on
Realtek Digital Home Center (DHC) RTD series SoCs. Hence add a
dependency on ARCH_REALTEK, to prevent asking the user about these
drivers when configuring a kernel without Realtek SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2892527cac9af6fa8f5e7b8daeffd7d4351fde68.1692113167.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Fix the binding for versaclock3 that was introduced this merge window
so we know what the values are for clk consumers
- Fix a 64-bit division issue in the versaclock3 driver
- Avoid breakage in the versaclock3 driver by rejiggering the enums
used to layout clks
- Fix the parent name of a clk in the Spreadtrum ums512 clk driver
- Fix a suspend/resume issue in Skyworks Si521xx clk driver where
regmap restoration fails because writes are wedged
- Return zero from Tegra bpmp recalc_rate() implementation when an
error occurs so we don't consider an error as a large rate
-----BEGIN PGP SIGNATURE-----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=RdLn
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A bunch of clk driver fixes for issues found recently:
- Fix the binding for versaclock3 that was introduced this merge
window so we know what the values are for clk consumers
- Fix a 64-bit division issue in the versaclock3 driver
- Avoid breakage in the versaclock3 driver by rejiggering the enums
used to layout clks
- Fix the parent name of a clk in the Spreadtrum ums512 clk driver
- Fix a suspend/resume issue in Skyworks Si521xx clk driver where
regmap restoration fails because writes are wedged
- Return zero from Tegra bpmp recalc_rate() implementation when an
error occurs so we don't consider an error as a large rate"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: tegra: fix error return case for recalc_rate
clk: si521xx: Fix regmap write accessor
clk: si521xx: Use REGCACHE_FLAT instead of NONE
clk: sprd: Fix thm_parents incorrect configuration
clk: vc3: Make vc3_clk_mux enum values based on vc3_clk enum values
clk: vc3: Fix output clock mapping
clk: vc3: Fix 64 by 64 division
dt-bindings: clock: versaclock3: Add description for #clock-cells property
- fix build warnings from builds performed with W=1
-----BEGIN PGP SIGNATURE-----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=+MGs
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20230928' of https://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- fix build warnings from builds performed with W=1
* tag 'xtensa-20230928' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: boot/lib: fix function prototypes
xtensa: umulsidi3: fix conditional expression
xtensa: boot: don't add include-dirs
xtensa: iss/network: make functions static
xtensa: tlb: include <asm/tlb.h> for missing prototype
xtensa: hw_breakpoint: include header for missing prototype
xtensa: smp: add headers for missing function prototypes
irqchip: irq-xtensa-mx: include header for missing prototype
xtensa: traps: add <linux/cpu.h> for function prototype
xtensa: stacktrace: include <asm/ftrace.h> for prototype
xtensa: signal: include headers for function prototypes
xtensa: processor.h: add init_arch() prototype
xtensa: ptrace: add prototypes to <asm/ptrace.h>
xtensa: irq: include <asm/traps.h>
xtensa: fault: include <asm/traps.h>
xtensa: add default definition for XCHAL_HAVE_DIV32
Implement the workaround for ARM Cortex-A520 erratum 2966298. On an
affected Cortex-A520 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.
The workaround is to execute a TLBI before returning to EL0 after all
loads of privileged data. A non-shareable TLBI to any address is
sufficient.
The workaround isn't necessary if page table isolation (KPTI) is
enabled, but for simplicity it will be. Page table isolation should
normally be disabled for Cortex-A520 as it supports the CSV3 feature
and the E0PD feature (used when KASLR is enabled).
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230921194156.1050055-2-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>