Fix wrong switch name in compatibility list. 88E6163 switch does not exist
and is in fact 88E6361
Fixes: 9229a9483d ("dt-bindings: net: dsa: marvell: add MV88E6361 switch to compatibility list")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Newer Lenovo laptops seem to use the KBLC symbol to control the backlight
Add support for handling the keyboard backlight on these devices
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Link: https://lore.kernel.org/r/20230827161940.485200-1-stuart.a.hayhurst@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* kvm-arm64/6.6/misc:
: .
: Misc KVM/arm64 updates for 6.6:
:
: - Don't unnecessary align non-stack allocations in the EL2 VA space
:
: - Drop HCR_VIRT_EXCP_MASK, which was never used...
:
: - Don't use smp_processor_id() in kvm_arch_vcpu_load(),
: but the cpu parameter instead
:
: - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
:
: - Remove prototypes without implementations
: .
KVM: arm64: Remove size-order align in the nVHE hyp private VA range
KVM: arm64: Remove unused declarations
KVM: arm64: Remove redundant kvm_set_pfn_accessed() from user_mem_abort()
KVM: arm64: Drop HCR_VIRT_EXCP_MASK
KVM: arm64: Use the known cpu id instead of smp_processor_id()
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/6.6/pmu-fixes:
: .
: Another set of PMU fixes, coutrtesy of Reiji Watanabe.
: From the cover letter:
:
: "This series fixes a couple of PMUver related handling of
: vPMU support.
:
: On systems where the PMUVer is not uniform across all PEs,
: KVM currently does not advertise PMUv3 to the guest,
: even if userspace successfully runs KVM_ARM_VCPU_INIT with
: KVM_ARM_VCPU_PMU_V3."
:
: Additionally, a fix for an obscure counter oversubscription
: issue happening when the hsot profines the guest's EL0.
: .
KVM: arm64: pmu: Guard PMU emulation definitions with CONFIG_KVM
KVM: arm64: pmu: Resync EL0 state on counter rotation
KVM: arm64: PMU: Don't advertise STALL_SLOT_{FRONTEND,BACKEND}
KVM: arm64: PMU: Don't advertise the STALL_SLOT event
KVM: arm64: PMU: Avoid inappropriate use of host's PMUVer
KVM: arm64: PMU: Disallow vPMU on non-uniform PMUVer
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/tlbi-range:
: .
: FEAT_TLBIRANGE support, courtesy of Raghavendra Rao Ananta.
: From the cover letter:
:
: "In certain code paths, KVM/ARM currently invalidates the entire VM's
: page-tables instead of just invalidating a necessary range. For example,
: when collapsing a table PTE to a block PTE, instead of iterating over
: each PTE and flushing them, KVM uses 'vmalls12e1is' TLBI operation to
: flush all the entries. This is inefficient since the guest would have
: to refill the TLBs again, even for the addresses that aren't covered
: by the table entry. The performance impact would scale poorly if many
: addresses in the VM is going through this remapping.
:
: For architectures that implement FEAT_TLBIRANGE, KVM can replace such
: inefficient paths by performing the invalidations only on the range of
: addresses that are in scope. This series tries to achieve the same in
: the areas of stage-2 map, unmap and write-protecting the pages."
: .
KVM: arm64: Use TLBI range-based instructions for unmap
KVM: arm64: Invalidate the table entries upon a range
KVM: arm64: Flush only the memslot after write-protect
KVM: arm64: Implement kvm_arch_flush_remote_tlbs_range()
KVM: arm64: Define kvm_tlb_flush_vmid_range()
KVM: arm64: Implement __kvm_tlb_flush_vmid_range()
arm64: tlb: Implement __flush_s2_tlb_range_op()
arm64: tlb: Refactor the core flush algorithm of __flush_tlb_range
KVM: Move kvm_arch_flush_remote_tlbs_memslot() to common code
KVM: Allow range-based TLB invalidation from common code
KVM: Remove CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL
KVM: arm64: Use kvm_arch_flush_remote_tlbs()
KVM: Declare kvm_arch_flush_remote_tlbs() globally
KVM: Rename kvm_arch_flush_remote_tlb() to kvm_arch_flush_remote_tlbs()
Signed-off-by: Marc Zyngier <maz@kernel.org>
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.
The second check can use reverse logic which reduces indentation level.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-12-tzimmermann@suse.de
Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-11-tzimmermann@suse.de
Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-10-tzimmermann@suse.de
Initialize struct fb_ops to the correct default values with the
internal __FB_DEFAULT_SBUS_OPS_*() macros. Rename the ioctl and
mmap callbacks to use the infix _sbusfb_. This makes them fit the
SBUS helpers' naming pattern.
It is not possible to use set all defaults via FB_DEAFULT_SBUS_OPS(),
as ffb provides its own implementation of fb_fillrect, fb_copyarea,
and fb_imageblit. Hence we also avoid FB_SBUS_HELPERS, but let the
driver select its dependencies individually instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-9-tzimmermann@suse.de
Initialize struct fb_ops to the correct default values with the
internal __FB_DEFAULT_SBUS_OPS_*() macros. Rename the ioctl and
mmap callbacks to use the infix _sbusfb_. This makes them fit the
SBUS helpers' naming pattern.
It is not possible to use set all defaults via FB_DEAFULT_SBUS_OPS(),
as cg6 provides its own implementation of fb_fillrect, fb_copyarea,
and fb_imageblit. Hence we also avoid FB_SBUS_HELPERS, but let the
driver select its dependencies individually instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-8-tzimmermann@suse.de
Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-7-tzimmermann@suse.de
Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-6-tzimmermann@suse.de
Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-5-tzimmermann@suse.de
Add macros to initialize struct fb_ops for drivers that support
framebuffers on Sparc's SBUS. Also add a Kconfig token that selects
the necessary helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-4-tzimmermann@suse.de
Avoid duplicate listings of sbuslib.o in the Makefile by building
it if CONFIG_FB_SBUS has been selected. Remove the object file from
the various drivers' build rules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-2-tzimmermann@suse.de
Since the 'cpus' field of policy structure will become empty in the
cpufreq core API, it is better to use 'related_cpus' in the exit()
callback of driver.
Fixes: c3274763bf ("cpufreq: powernow-k8: Initialize per-cpu data-structures properly")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Drop unneeded quotes over simple string values to fix recently enabled
yamllint warning:
[error] string value is redundantly quoted with any quotes (quoted-strings)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230826093852.9334-1-krzysztof.kozlowski@linaro.org
Implement the light-weight tear down and bring up helpers to reduce the
amount of work to do on CPU offline/online operation.
This change helps to make the hotplugging paths much faster.
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://lore.kernel.org/lkml/20230816033402.3abmugb5goypvllm@vireshk-i7/
[ Viresh: Fixed rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Increase the RX buffer size to 3K when the SBP bit is on. The size of
the RX buffer determines the number of pages allocated which may not
be sufficient for receive frames larger than the set MTU size.
Cc: stable@vger.kernel.org
Fixes: 89eaefb61d ("igb: Support RX-ALL feature flag.")
Reported-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the Xilinx GMII to RGMII Converter device tree binding
documentation to json schema.
This converter is usually used as gem <---> gmii2rgmii <---> external phy
and, it's phy-handle should point to the phandle of the external phy.
Signed-off-by: Pranavi Somisetty <pranavi.somisetty@amd.com>
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With introduction of ERI access control in RG.0 base address of the PMU
unit registers has changed. Add support for the new PMU configuration.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Sabrina Dubroca says:
====================
tls: expand tls_cipher_size_desc to simplify getsockopt/setsockopt
Commit 2d2c5ea242 ("net/tls: Describe ciphers sizes by const
structs") introduced tls_cipher_size_desc to describe the size of the
fields of the per-cipher crypto_info structs, and commit ea7a9d88ba
("net/tls: Use cipher sizes structs") used it, but only in
tls_device.c and tls_device_fallback.c, and skipped converting similar
code in tls_main.c and tls_sw.c.
This series expands tls_cipher_size_desc (renamed to tls_cipher_desc
to better fit this expansion) to fully describe a cipher:
- offset of the fields within the per-cipher crypto_info
- size of the full struct (for copies to/from userspace)
- offload flag
- algorithm name used by SW crypto
With these additions, we can remove ~350L of
switch (crypto_info->cipher_type) { ... }
from tls_set_device_offload, tls_sw_fallback_init,
do_tls_getsockopt_conf, do_tls_setsockopt_conf, tls_set_sw_offload
(mainly do_tls_getsockopt_conf and tls_set_sw_offload).
This series also adds the ARIA ciphers to the tls selftests, and some
more getsockopt/setsockopt tests to cover more of the code changed by
this series.
====================
Link: https://lore.kernel.org/r/cover.1692977948.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls_cipher_desc also contains the algorithm name needed by
crypto_alloc_aead, use it.
Finally, use get_cipher_desc to check if the cipher_type coming from
userspace is valid, and remove the cipher_type switch.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/53d021d80138aa125a9cef4468aa5ce531975a7b.1692977948.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can get rid of some local variables, but we have to keep nonce_size
because tls1.3 uses nonce_size = 0 for all ciphers.
We can also drop the runtime sanity checks on iv/rec_seq/tag size,
since we have compile time checks on those values.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/deed9c4430a62c31751a72b8c03ad66ffe710717.1692977948.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Every cipher uses the same code to update its crypto_info struct based
on the values contained in the cctx, with only the struct type and
size/offset changing. We can get those from tls_cipher_desc, and use
a single pair of memcpy and final copy_to_user.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/c21a904b91e972bdbbf9d1c6d2731ccfa1eedf72.1692977948.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls_sw_fallback_init already gets the key and tag size from
tls_cipher_desc. We can now also check that the cipher type is valid,
and stop hard-coding the algorithm name passed to crypto_alloc_aead.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/c8c94b8fcafbfb558e09589c1f1ad48dbdf92f76.1692977948.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls_set_device_offload is already getting iv and rec_seq sizes from
tls_cipher_desc. We can now also check if the cipher_type coming from
userspace is valid and can be offloaded.
We can also remove the runtime check on rec_seq, since we validate it
at compile time.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/8ab71b8eca856c7aaf981a45fe91ac649eb0e2e9.1692977948.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- add nonce, usually equal to iv_size but not for chacha
- add offsets into the crypto_info for each field
- add algorithm name
- add offloadable flag
Also add helpers to access each field of a crypto_info struct
described by a tls_cipher_desc.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/39d5f476d63c171097764e8d38f6f158b7c109ae.1692977948.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls_cipher_size_desc indexes ciphers by their type, but we're not
using indices 0..50 of the array. Each struct tls_cipher_size_desc is
20B, so that's a lot of unused memory. We can reindex the array
starting at the lowest used cipher_type.
Introduce the get_cipher_size_desc helper to find the right item and
avoid out-of-bounds accesses, and make tls_cipher_size_desc's size
explicit so that gcc reminds us to update TLS_CIPHER_MIN/MAX when we
add a new cipher.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/5e054e370e240247a5d37881a1cd93a67c15f4ca.1692977948.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Donald Hunter says:
====================
tools/net/ynl: Add support for netlink-raw families
This patchset adds support for netlink-raw families such as rtnetlink.
Patch 1 fixes a typo in existing schemas
Patch 2 contains the schema definition
Patches 3 & 4 update the schema documentation
Patches 5 - 9 extends ynl
Patches 10 - 12 add several netlink-raw specs
The netlink-raw schema is very similar to genetlink-legacy and I thought
about making the changes there and symlinking to it. On balance I
thought that might be problematic for accurate schema validation.
rtnetlink doesn't seem to fit into unified or directional message
enumeration models. It seems like an 'explicit' model would be useful,
to force the schema author to specify the message ids directly.
There is not yet support for notifications because ynl currently doesn't
support defining 'event' properties on a 'do' operation. The message ids
are shared so ops need to be both sync and async. I plan to look at this
in a future patch.
The link and route messages contain different nested attributes
dependent on the type of link or route. Decoding these will need some
kind of attr-space selection that uses the value of another attribute as
the selector key. These nested attributes have been left with type
'binary' for now.
====================
Link: https://lore.kernel.org/r/20230825122756.7603-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add schema for rt route with support for getroute, newroute and
delroute.
Routes can be dumped with filter attributes like this:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_route.yaml \
--dump getroute --json '{"rtm-family": 2, "rtm-table": 254}'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-13-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add schema for rt link with support for newlink, dellink, getlink,
setlink and getstats.
A dummy link can be created like this:
sudo ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_link.yaml \
--do newlink --create \
--json '{"ifname": "dummy0", "linkinfo": {"kind": "dummy"}}'
For example, offload stats can be fetched like this:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_link.yaml \
--dump getstats --json '{ "filter-mask": 8 }'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-12-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add schema for rt addr with support for:
- newaddr, deladdr, getaddr (dump)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-11-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for using NLM_F_REPLACE, _EXCL, _CREATE and _APPEND flags
in requests.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-10-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the 'array-nest' attribute type that is used by several
netlink-raw families.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230825122756.7603-9-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>