Commit graph

1,233,579 commits

Author SHA1 Message Date
Ruan Jinjie
c39300c47d thermal/drivers/db8500: Remove redundant of_match_ptr()
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230809101439.2663042-1-ruanjinjie@huawei.com
2023-08-16 12:09:19 +02:00
David S. Miller
569dce3f8e Merge branch 'inet-data-races'
Eric Dumazet says:

====================
inet: socket lock and data-races avoidance

In this series, I converted 20 bits in "struct inet_sock" and made
them truly atomic.

This allows to implement many IP_ socket options in a lockless
fashion (no need to acquire socket lock), and fixes data-races
that were showing up in various KCSAN reports.

I also took care of IP_TTL/IP_MINTTL, but left few other options
for another series.

v4: Rebased after recent mptcp changes.
  Added Reviewed-by: tags from Simon (thanks !)

v3: fixed patch 7, feedback from build bot about ipvs set_mcast_loop()

v2: addressed a feedback from a build bot in patch 9 by removing
 unused issk variable in mptcp_setsockopt_sol_ip_set_transparent()
 Added Acked-by: tags from Soheil (thanks !)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:18 +01:00
Eric Dumazet
12af73269f inet: implement lockless IP_MINTTL
inet->min_ttl is already read with READ_ONCE().

Implementing IP_MINTTL socket option set/read
without holding the socket lock is easy.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:18 +01:00
Eric Dumazet
10f42426e5 inet: implement lockless IP_TTL
ip_select_ttl() is racy, because it reads inet->uc_ttl
without proper locking.

Add READ_ONCE()/WRITE_ONCE() annotations while
allowing IP_TTL socket option to be set/read without
holding the socket lock.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:18 +01:00
Eric Dumazet
08e39c0dfa inet: move inet->defer_connect to inet->inet_flags
Make room in struct inet_sock by removing this bit field,
using one available bit in inet_flags instead.

Also move local_port_range to fill the resulting hole,
saving 8 bytes on 64bit arches.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:18 +01:00
Eric Dumazet
ca571e2eb7 inet: move inet->bind_address_no_port to inet->inet_flags
IP_BIND_ADDRESS_NO_PORT socket option can now be set/read
without locking the socket.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:17 +01:00
Eric Dumazet
f04b8d3478 inet: move inet->nodefrag to inet->inet_flags
IP_NODEFRAG socket option can now be set/read
without locking the socket.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:17 +01:00
Eric Dumazet
b1c0356a58 inet: move inet->is_icsk to inet->inet_flags
We move single bit fields to inet->inet_flags to avoid races.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:17 +01:00
Eric Dumazet
4bd0623f04 inet: move inet->transparent to inet->inet_flags
IP_TRANSPARENT socket option can now be set/read
without locking the socket.

v2: removed unused issk variable in mptcp_setsockopt_sol_ip_set_transparent()
v4: rebased after commit 3f326a821b ("mptcp: change the mpc check helper to return a sk")

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:17 +01:00
Eric Dumazet
307b4ac6dc inet: move inet->mc_all to inet->inet_frags
IP_MULTICAST_ALL socket option can now be set/read
without locking the socket.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:17 +01:00
Eric Dumazet
b09bde5c35 inet: move inet->mc_loop to inet->inet_frags
IP_MULTICAST_LOOP socket option can now be set/read
without locking the socket.

v3: fix build bot error reported in ipvs set_mcast_loop()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:17 +01:00
Eric Dumazet
cafbe182a4 inet: move inet->hdrincl to inet->inet_flags
IP_HDRINCL socket option can now be set/read
without locking the socket.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:17 +01:00
Eric Dumazet
3f7e753206 inet: move inet->freebind to inet->inet_flags
IP_FREEBIND socket option can now be set/read
without locking the socket.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:17 +01:00
Eric Dumazet
8e8cfb114d inet: move inet->recverr_rfc4884 to inet->inet_flags
IP_RECVERR_RFC4884 socket option can now be set/read
without locking the socket.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:17 +01:00
Eric Dumazet
6b5f43ea08 inet: move inet->recverr to inet->inet_flags
IP_RECVERR socket option can now be set/get without locking the socket.

This patch potentially avoid data-races around inet->recverr.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:17 +01:00
Eric Dumazet
b4d84bce4c inet: set/get simple options locklessly
Now we have inet->inet_flags, we can set following options
without having to hold the socket lock:

IP_PKTINFO, IP_RECVTTL, IP_RECVTOS, IP_RECVOPTS, IP_RETOPTS,
IP_PASSSEC, IP_RECVORIGDSTADDR, IP_RECVFRAGSIZE.

ip_sock_set_pktinfo() no longer hold the socket lock.

Similarly we can get the following options whithout holding
the socket lock:

IP_PKTINFO, IP_RECVTTL, IP_RECVTOS, IP_RECVOPTS, IP_RETOPTS,
IP_PASSSEC, IP_RECVORIGDSTADDR, IP_CHECKSUM, IP_RECVFRAGSIZE.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:17 +01:00
Eric Dumazet
c274af2242 inet: introduce inet->inet_flags
Various inet fields are currently racy.

do_ip_setsockopt() and do_ip_getsockopt() are mostly holding
the socket lock, but some (fast) paths do not.

Use a new inet->inet_flags to hold atomic bits in the series.

Remove inet->cmsg_flags, and use instead 9 bits from inet_flags.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 11:09:16 +01:00
Chen Jiahao
e9b1de73b7 thermal/drivers/mediatek: Clean up redundant dev_err_probe()
Referring to platform_get_irq()'s definition, the return value has
already been checked if ret < 0, and printed via dev_err_probe().
Calling dev_err_probe() one more time outside platform_get_irq()
is obviously redundant.

Removing dev_err_probe() outside platform_get_irq() to clean up
above problem.

Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230802094527.988842-1-chenjiahao16@huawei.com
2023-08-16 12:06:05 +02:00
Nathan Chancellor
92382d7441 lib: test_scanf: Add explicit type cast to result initialization in test_number_prefix()
A recent change in clang allows it to consider more expressions as
compile time constants, which causes it to point out an implicit
conversion in the scanf tests:

  lib/test_scanf.c:661:2: warning: implicit conversion from 'int' to 'unsigned char' changes value from -168 to 88 [-Wconstant-conversion]
    661 |         test_number_prefix(unsigned char,       "0xA7", "%2hhx%hhx", 0, 0xa7, 2, check_uchar);
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  lib/test_scanf.c:609:29: note: expanded from macro 'test_number_prefix'
    609 |         T result[2] = {~expect[0], ~expect[1]};                                 \
        |                       ~            ^~~~~~~~~~
  1 warning generated.

The result of the bitwise negation is the type of the operand after
going through the integer promotion rules, so this truncation is
expected but harmless, as the initial values in the result array get
overwritten by _test() anyways. Add an explicit cast to the expected
type in test_number_prefix() to silence the warning. There is no
functional change, as all the tests still pass with GCC 13.1.0 and clang
18.0.0.

Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linuxq/issues/1899
Link: 610ec954e1
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230807-test_scanf-wconstant-conversion-v2-1-839ca39083e1@kernel.org
2023-08-16 11:47:29 +02:00
Prasad Pandit
b35c968363 ipv6: fix indentation of a config attribute
Fix indentation of a type attribute of IPV6_VTI config entry.

Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 10:03:08 +01:00
David S. Miller
936db833c2 Merge branch 'redundant-of_match_ptr'
Ruan Jinjie says:

====================
net: Remove redundant of_match_ptr() macro

Since these net drivers depend on CONFIG_OF, there is
no need to wrap the macro of_match_ptr() here.

Changes in v3:
- Collect responses from v1 and v2.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 09:59:40 +01:00
Ruan Jinjie
cf2abd8724 wlcore: spi: Remove redundant of_match_ptr()
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 09:59:40 +01:00
Ruan Jinjie
537a6b9927 net: qualcomm: Remove redundant of_match_ptr()
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 09:59:40 +01:00
Ruan Jinjie
21b566fda0 net: gemini: Remove redundant of_match_ptr()
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 09:59:40 +01:00
Ruan Jinjie
81d463c02b net: dsa: rzn1-a5psw: Remove redundant of_match_ptr()
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 09:59:40 +01:00
Ruan Jinjie
aae249dfa0 net: dsa: realtek: Remove redundant of_match_ptr()
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 09:59:40 +01:00
Etienne Carriere
4c757f6b80 ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
Since OP-TEE release tag 3.22.0, OP-TEE SCMI service for STM32MP13x
SoC family exposes PMIC voltage regulators. This change defines
them in the platform DTS file and removes the fixed regulators that
were previously defined to abstract them before OP-TEE firmware was
ready.

Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-08-16 10:58:45 +02:00
Etienne Carriere
fb266d2d80 ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
Updates STM32MP13x SoC DTSI file to define the SoC voltage regulators
exposed by OP-TEE SCMI service and remove the fixed regulator
abstraction previously used until OP-TEE OS firmware embeds the
service which it does since its release tag 3.22.0.

Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-08-16 10:58:44 +02:00
Etienne Carriere
fe95052fc7 dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
Adds SCMI regulator identifiers for STM32MP13x family.

Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2023-08-16 10:58:41 +02:00
Li Zetao
61a9b174f4 nfc: virtual_ncidev: Use module_misc_device macro to simplify the code
Use the module_misc_device macro to simplify the code, which is the
same as declaring with module_init() and module_exit().

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 09:54:16 +01:00
Simon Horman
0b70f1950e mailmap: add entries for Simon Horman
Retire some of my email addresses from Kernel activities.

Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 09:53:10 +01:00
Mark Brown
c51592a95f thermal/drivers/sun8i: Free calibration nvmem after reading it
The sun8i thermal driver reads calibration data via the nvmem API at
startup, updating the device configuration and not referencing the data
again.  Rather than explicitly freeing the nvmem data the driver relies
on devm_ to release it, even though the data is never referenced again.
The allocation is still tracked so it's not leaked but this is notable
when looking at the code and is a little wasteful so let's instead
explicitly free the nvmem after we're done with it.

Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230719-thermal-sun8i-free-nvmem-v1-1-f553d5afef79@kernel.org
2023-08-16 10:51:46 +02:00
Alexey Kardashevskiy
e221804dad x86/sev: Do not handle #VC for DR7 read/write
With MSR_AMD64_SEV_DEBUG_SWAP enabled, the guest is not expected to
receive a #VC for reads or writes of DR7.

Update the SNP_FEATURES_PRESENT mask with MSR_AMD64_SNP_DEBUG_SWAP so
an SNP guest doesn't gracefully terminate during SNP feature negotiation
if MSR_AMD64_SEV_DEBUG_SWAP is enabled.

Since a guest is not expected to receive a #VC on DR7 accesses when
MSR_AMD64_SEV_DEBUG_SWAP is enabled, return an error from the #VC
handler in this situation.

Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20230816022122.981998-1-aik@amd.com
2023-08-16 10:13:42 +02:00
David S. Miller
5fc43ce03b ipsec-2023-08-15
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH7ZpcWbFyOOp6OJbrB3Eaf9PW7cFAmTbRoQACgkQrB3Eaf9P
 W7eY+A/8DJtqwFs1uAahS9jCX1bxf3vKKUPkEKu3IfcZVv2WcMVDI7XRLnBb93PC
 GR1RQskCErXMrVv7mmaBuk/uZAcAFQUkzna3MmyAw4lFfJSWORD6rzGiFeDVMsvx
 7gczhYC6aPwhiyAqk6eoNTKxLaZ0zfGiW9ZKWdZXuTjp+ijksa56gEdKsPwMQIht
 FE4+CHia0dxFK0bUZMLHc4ixQbqKkHj/qVxB8k8zQnDgmCavjlEAnc+PAOX+SNxm
 uju4gDV/9qXYOkHTwRD9/aPcvCofTlD9XynSHkMC24yLS6Ir4A1mFUZywNSiwcgX
 //WxymD1N93inuHGzVluhm6Jy+4hTaS5p1y+H86L2TfC9b5SOrNYtj3yLB3aqDgq
 1+4t4cVAtpk7uLfPYKzreDJH+CoxQDC8x+0dlzQUGnV11eIJ2RA0brJhFqHjOlbD
 SAQtBwkPqlAXnrdDr2pUhyrlrwAGXux8T5u5tF3NSS3FEwh7akRBfU2HV6vPEE80
 qPIxHSbA9d0j+tOjbkHIYEv9fMHHFC/aFLZMYOew016TKGBJth4g+DJqJiEEDZZh
 iEIC62lrMV2qsyW5PdYdxGesZaAC/4koFCTBgkBYyIC/4gm5E74Ygu5B2A3xx89p
 H6MlF3Miofsf9aSh1vw4cyb69mPaP1XG95OGTqc0qpV2XhhjpE0=
 =UVTC
 -----END PGP SIGNATURE-----

Merge tag 'ipsec-2023-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
1) Fix a slab-out-of-bounds read in xfrm_address_filter.
   From Lin Ma.

2) Fix the pfkey sadb_x_filter validation.
   From Lin Ma.

3) Use the correct nla_policy structure for XFRMA_SEC_CTX.
   From Lin Ma.

4) Fix warnings triggerable by bad packets in the encap functions.
   From Herbert Xu.

5) Fix some slab-use-after-free in decode_session6.
   From Zhengchao Shao.

6) Fix a possible NULL piointer dereference in xfrm_update_ae_params.
   Lin Ma.

7) Add a forgotten nla_policy for XFRMA_MTIMER_THRESH.
   From Lin Ma.

8) Don't leak offloaded policies.
   From Leon Romanovsky.

9) Delete also the offloading part of an acquire state.
   From Leon Romanovsky.

Please pull or let me know if there are problems.
2023-08-16 08:57:41 +01:00
Yangtao Li
f664a6b5a9 thermal/drivers/sun8i: Remove unneeded comments
It's redundant, let's remove it.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230626125515.18830-1-frank.li@vivo.com
2023-08-16 09:57:29 +02:00
David S. Miller
bc02fc7990 Merge branch 'hns3-ethtool'
Jijie Shao says:

====================
hns3: refactor registers information for ethtool -d

refactor registers information for ethtool -d
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 08:56:38 +01:00
Jijie Shao
36122201ee net: hns3: fix wrong rpu tln reg issue
In the original RPU query command, the status register values of
multiple RPU tunnels are accumulated by default, which is unreasonable.
This patch Fix it by querying the specified tunnel ID.
The tunnel number of the device can be obtained from firmware
during initialization.

Fixes: ddb54554fa ("net: hns3: add DFX registers information for ethtool -d")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 08:56:38 +01:00
Jijie Shao
3ef5d70b82 net: hns3: Support tlv in regs data for HNS3 VF driver
The dump register function is being refactored.
The third step in refactoring is to support tlv info in regs data for
HNS3 PF driver.

Currently, if we use "ethtool -d" to dump regs value,
the output is as follows:
  offset1: 00 01 02 03 04 05 ...
  offset2:10 11 12 13 14 15 ...
  ......

We can't get the value of a register directly.

This patch deletes the original separator information and
add tag_len_value information in regs data.
ethtool can parse register data in key-value format by -d command.

a patch will be added to the ethtool to parse regs data
in the following format:
  reg1 : value2
  reg2 : value2
  ......

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 08:56:38 +01:00
Jijie Shao
d8634b7c3f net: hns3: Support tlv in regs data for HNS3 PF driver
The dump register function is being refactored.
The second step in refactoring is to support tlv info in regs data for
HNS3 PF driver.

Currently, if we use "ethtool -d" to dump regs value,
the output is as follows:
  offset1: 00 01 02 03 04 05 ...
  offset2:10 11 12 13 14 15 ...
  ......

We can't get the value of a register directly.

This patch deletes the original separator information and
add tag_len_value information in regs data.
ethtool can parse register data in key-value format by -d command.

a patch will be added to the ethtool to parse regs data
in the following format:
  reg1 : value2
  reg2 : value2
  ......

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 08:56:38 +01:00
Jijie Shao
939ccd107f net: hns3: move dump regs function to a separate file
The dump register function is being refactored.
The first step in refactoring is put the dump regs function
into a separate file.

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16 08:56:38 +01:00
Min-Hua Chen
02cf5bcbd0 thermal/drivers/tsens: Make tsens_xxxx_nvmem static
This patch fixes the following sparse warnings:

drivers/thermal/qcom/tsens-v1.c:24:40: sparse: warning: symbol 'tsens_qcs404_nvmem' was not declared. Should it be static?
drivers/thermal/qcom/tsens-v0_1.c:26:40: sparse: warning: symbol 'tsens_8916_nvmem' was not declared. Should it be static?
drivers/thermal/qcom/tsens-v0_1.c:42:40: sparse: warning: symbol 'tsens_8974_nvmem' was not declared. Should it be static?
drivers/thermal/qcom/tsens-v0_1.c:64:40: sparse: warning: symbol 'tsens_8974_backup_nvmem' was not declared. Should it be static?

No functional change intended.

Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230713160415.149381-1-minhuadotchen@gmail.com
2023-08-16 09:54:39 +02:00
Ahmad Fatoum
4afcb58ea4 thermal/drivers/imx8mm: Suppress log message on probe deferral
nvmem_cell_read_u32() may return -EPROBE_DEFER if NVMEM supplier has not
yet been probed. Future reprobe may succeed, so printing:

  i.mx8mm_thermal 30260000.tmu: Failed to read OCOTP nvmem cell (-517).

to the log is confusing. Fix this by using dev_err_probe. This also
elevates the message from warning to error, which is more correct: The
log message is only ever printed in probe error path and probe aborts
afterwards, so it really warrants an error-level message.

Fixes: 4032916488 ("thermal/drivers/imx: Add support for loading calibration data from OCOTP")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230708112647.2897294-1-a.fatoum@pengutronix.de
2023-08-16 09:54:39 +02:00
Minjie Du
19ad9f2975 thermal/drivers/mediatek/lvts: Fix parameter check in lvts_debugfs_init()
The documentation says "If an error occurs, ERR_PTR(-ERROR) will be
returned" but the current code checks against a NULL pointer returned.

Fix this by checking if IS_ERR().

Signed-off-by: Minjie Du <duminjie@vivo.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230713042413.2519-1-duminjie@vivo.com
2023-08-16 09:54:32 +02:00
Nícolas F. R. A. Prado
2bba1acf7a thermal/drivers/mediatek/lvts_thermal: Manage threshold between sensors
Each LVTS thermal controller can have up to four sensors, each capable
of triggering its own interrupt when its measured temperature crosses
the configured threshold. The threshold for each sensor is handled
separately by the thermal framework, since each one is registered with
its own thermal zone and trips. However, the temperature thresholds are
configured on the controller, and therefore are shared between all
sensors on that controller.

When the temperature measured by the sensors is different enough to
cause the thermal framework to configure different thresholds for each
one, interrupts start triggering on sensors outside the last threshold
configured.

To address the issue, track the thresholds required by each sensor and
only actually set the highest one in the hardware, and disable
interrupts for all sensors outside the current configured range.

Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-7-nfraprado@collabora.com
2023-08-16 09:54:32 +02:00
Nícolas F. R. A. Prado
77354eaef8 thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed
The thermal framework might leave the low threshold unset if there
aren't any lower trip points. This leaves the register zeroed, which
translates to a very high temperature for the low threshold. The
interrupt for this threshold is then immediately triggered, and the
state machine gets stuck, preventing any other temperature monitoring
interrupts to ever trigger.

(The same happens by not setting the Cold or Hot to Normal thresholds
when using those)

Set the unused threshold to a valid low value. This value was chosen so
that for any valid golden temperature read from the efuse, when the
value is converted to raw and back again to milliCelsius, the result
doesn't underflow.

Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-6-nfraprado@collabora.com
2023-08-16 09:54:31 +02:00
Nícolas F. R. A. Prado
487bf099e8 thermal/drivers/mediatek/lvts_thermal: Disable undesired interrupts
Out of the many interrupts supported by the hardware, the only ones of
interest to the driver currently are:
* The temperature went over the high offset threshold, for any of the
  sensors
* The temperature went below the low offset threshold, for any of the
  sensors
* The temperature went over the stage3 threshold

These are the only thresholds configured by the driver through the
OFFSETH, OFFSETL, and PROTTC registers, respectively.

The current interrupt mask in LVTS_MONINT_CONF, enables many more
interrupts, including data ready on sensors for both filtered and
immediate mode. These are not only not handled by the driver, but they
are also triggered too often, causing unneeded overhead. Disable these
unnecessary interrupts.

The meaning of each bit can be seen in the comment describing
LVTS_MONINTST in the IRQ handler.

Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-5-nfraprado@collabora.com
2023-08-16 09:54:31 +02:00
Nícolas F. R. A. Prado
f79e996c7e thermal/drivers/mediatek/lvts_thermal: Use offset threshold for IRQ
There are two kinds of temperature monitoring interrupts available:
* High Offset, Low Offset
* Hot, Hot to normal, Cold

The code currently uses the hot/h2n/cold interrupts, however in a way
that doesn't work: the cold threshold is left uninitialized, which
prevents the other thresholds from ever triggering, and the h2n
interrupt is used as the lower threshold, which prevents the hot
interrupt from triggering again after the thresholds are updated by the
thermal framework, since a hot interrupt can only trigger again after
the hot to normal interrupt has been triggered.

But better yet than addressing those issues, is to use the high/low
offset interrupts instead. This way only two thresholds need to be
managed, which have a simpler state machine, making them a better match
to the thermal framework's high and low thresholds.

Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-4-nfraprado@collabora.com
2023-08-16 09:54:31 +02:00
Nícolas F. R. A. Prado
64de162e34 thermal/drivers/mediatek/lvts_thermal: Honor sensors in immediate mode
Each controller can be configured to operate on immediate or filtered
mode. On filtered mode, the sensors are enabled by setting the
corresponding bits in MONCTL0, while on immediate mode, by setting
MSRCTL1.

Previously, the code would set MSRCTL1 for all four sensors when
configured to immediate mode, but given that the controller might not
have all four sensors connected, this would cause interrupts to trigger
for non-existent sensors. Fix this by handling the MSRCTL1 register
analogously to the MONCTL0: only enable the sensors that were declared.

Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-3-nfraprado@collabora.com
2023-08-16 09:54:31 +02:00
Nícolas F. R. A. Prado
cbd8c5aae2 thermal/drivers/mediatek/lvts_thermal: Handle IRQ on all controllers
There is a single IRQ handler for each LVTS thermal domain, and it is
supposed to check each of its underlying controllers for the origin of
the interrupt and clear its status. However due to a typo, only the
first controller was ever being handled, which resulted in the interrupt
never being cleared when it happened on the other controllers. Add the
missing index so interrupts are handled for all controllers.

Fixes: f5f633b182 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-2-nfraprado@collabora.com
2023-08-16 09:54:31 +02:00
ruanmeisi
b8bd342d50 fuse: nlookup missing decrement in fuse_direntplus_link
During our debugging of glusterfs, we found an Assertion failed error:
inode_lookup >= nlookup, which was caused by the nlookup value in the
kernel being greater than that in the FUSE file system.

The issue was introduced by fuse_direntplus_link, where in the function,
fuse_iget increments nlookup, and if d_splice_alias returns failure,
fuse_direntplus_link returns failure without decrementing nlookup
https://github.com/gluster/glusterfs/pull/4081

Signed-off-by: ruanmeisi <ruan.meisi@zte.com.cn>
Fixes: 0b05b18381 ("fuse: implement NFS-like readdirplus support")
Cc: <stable@vger.kernel.org> # v3.9
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2023-08-16 09:40:48 +02:00