A control-protection fault is triggered when a control-flow transfer
attempt violates Shadow Stack or Indirect Branch Tracking constraints.
For example, the return address for a RET instruction differs from the copy
on the shadow stack.
There already exists a control-protection fault handler for handling kernel
IBT faults. Refactor this fault handler into separate user and kernel
handlers, like the page fault handler. Add a control-protection handler
for usermode. To avoid ifdeffery, put them both in a new file cet.c, which
is compiled in the case of either of the two CET features supported in the
kernel: kernel IBT or user mode shadow stack. Move some static inline
functions from traps.c into a header so they can be used in cet.c.
Opportunistically fix a comment in the kernel IBT part of the fault
handler that is on the end of the line instead of preceding it.
Keep the same behavior for the kernel side of the fault handler, except for
converting a BUG to a WARN in the case of a #CP happening when the feature
is missing. This unifies the behavior with the new shadow stack code, and
also prevents the kernel from crashing under this situation which is
potentially recoverable.
The control-protection fault handler works in a similar way as the general
protection fault handler. It provides the si_code SEGV_CPERR to the signal
handler.
Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-28-rick.p.edgecombe%40intel.com
Add three new arch_prctl() handles:
- ARCH_SHSTK_ENABLE/DISABLE enables or disables the specified
feature. Returns 0 on success or a negative value on error.
- ARCH_SHSTK_LOCK prevents future disabling or enabling of the
specified feature. Returns 0 on success or a negative value
on error.
The features are handled per-thread and inherited over fork(2)/clone(2),
but reset on exec().
Co-developed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-27-rick.p.edgecombe%40intel.com
Just like user xfeatures, supervisor xfeatures can be active in the
registers or present in the task FPU buffer. If the registers are
active, the registers can be modified directly. If the registers are
not active, the modification must be performed on the task FPU buffer.
When the state is not active, the kernel could perform modifications
directly to the buffer. But in order for it to do that, it needs
to know where in the buffer the specific state it wants to modify is
located. Doing this is not robust against optimizations that compact
the FPU buffer, as each access would require computing where in the
buffer it is.
The easiest way to modify supervisor xfeature data is to force restore
the registers and write directly to the MSRs. Often times this is just fine
anyway as the registers need to be restored before returning to userspace.
Do this for now, leaving buffer writing optimizations for the future.
Add a new function fpregs_lock_and_load() that can simultaneously call
fpregs_lock() and do this restore. Also perform some extra sanity
checks in this function since this will be used in non-fpu focused code.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-26-rick.p.edgecombe%40intel.com
Shadow stack register state can be managed with XSAVE. The registers
can logically be separated into two groups:
* Registers controlling user-mode operation
* Registers controlling kernel-mode operation
The architecture has two new XSAVE state components: one for each group
of those groups of registers. This lets an OS manage them separately if
it chooses. Future patches for host userspace and KVM guests will only
utilize the user-mode registers, so only configure XSAVE to save
user-mode registers. This state will add 16 bytes to the xsave buffer
size.
Future patches will use the user-mode XSAVE area to save guest user-mode
CET state. However, VMCS includes new fields for guest CET supervisor
states. KVM can use these to save and restore guest supervisor state, so
host supervisor XSAVE support is not required.
Adding this exacerbates the already unwieldy if statement in
check_xstate_against_struct() that handles warning about unimplemented
xfeatures. So refactor these check's by having XCHECK_SZ() set a bool when
it actually check's the xfeature. This ends up exceeding 80 chars, but was
better on balance than other options explored. Pass the bool as pointer to
make it clear that XCHECK_SZ() can change the variable.
While configuring user-mode XSAVE, clarify kernel-mode registers are not
managed by XSAVE by defining the xfeature in
XFEATURE_MASK_SUPERVISOR_UNSUPPORTED, like is done for XFEATURE_MASK_PT.
This serves more of a documentation as code purpose, and functionally,
only enables a few safety checks.
Both XSAVE state components are supervisor states, even the state
controlling user-mode operation. This is a departure from earlier features
like protection keys where the PKRU state is a normal user
(non-supervisor) state. Having the user state be supervisor-managed
ensures there is no direct, unprivileged access to it, making it harder
for an attacker to subvert CET.
To facilitate this privileged access, define the two user-mode CET MSRs,
and the bits defined in those MSRs relevant to future shadow stack
enablement patches.
Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-25-rick.p.edgecombe%40intel.com
The x86 Control-flow Enforcement Technology (CET) feature includes a
new type of memory called shadow stack. This shadow stack memory has
some unusual properties, which requires some core mm changes to
function properly.
In userspace, shadow stack memory is writable only in very specific,
controlled ways. However, since userspace can, even in the limited
ways, modify shadow stack contents, the kernel treats it as writable
memory. As a result, without additional work there would remain many
ways for userspace to trigger the kernel to write arbitrary data to
shadow stacks via get_user_pages(, FOLL_WRITE) based operations. To
help userspace protect their shadow stacks, make this a little less
exposed by blocking writable get_user_pages() operations for shadow
stack VMAs.
Still allow FOLL_FORCE to write through shadow stack protections, as it
does for read-only protections. This is required for debugging use
cases.
[ dhansen: fix rebase goof, readd writable_file_mapping_allowed() hunk ]
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-23-rick.p.edgecombe%40intel.com
Use GUEST_FAIL() in ARM's arch timer helpers now that printf-based
guest asserts are the default (and only) style of guest asserts, and
say goodbye to the GUEST_ASSERT_1() alias.
Link: https://lore.kernel.org/r/20230729003643.1053367-35-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the newfanged printf-based guest assert framework to spit out the
guest RIP when an unhandled exception is detected, which makes debugging
such failures *much* easier.
Link: https://lore.kernel.org/r/20230729003643.1053367-34-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the param-based guest assert macros and enable the printf versions
for all selftests. Note! This change can affect tests even if they
don't use directly use guest asserts! E.g. via library code, or due to
the compiler making different optimization decisions.
Link: https://lore.kernel.org/r/20230729003643.1053367-33-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert x86's VMX PMU capabilities test to use printf-based guest asserts.
Opportunstically add a helper to do the WRMSR+assert so as to reduce the
amount of copy+paste needed to spit out debug information.
Link: https://lore.kernel.org/r/20230729003643.1053367-31-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert x86's nested SVM software interrupt injection test to use printf-
based guest asserts. Opportunistically use GUEST_ASSERT() and
GUEST_FAIL() in a few locations to spit out more debug information.
Link: https://lore.kernel.org/r/20230729003643.1053367-28-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert x86's nested exceptions test to printf-based guest asserts, and
use REPORT_GUEST_ASSERT() instead of TEST_FAIL() so that output is
formatted correctly.
Link: https://lore.kernel.org/r/20230729003643.1053367-26-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert x86's MONITOR/MWAIT test to use printf-based guest asserts. Add a
macro to handle reporting failures to reduce the amount of copy+paste
needed for MONITOR vs. MWAIT.
Link: https://lore.kernel.org/r/20230729003643.1053367-25-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert x86's Hyper-V feature test to use print-based guest asserts.
Opportunistically use the EQ and NE variants in a few places to capture
additional information.
Link: https://lore.kernel.org/r/20230729003643.1053367-23-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert x86's CPUID test to use printf-based GUEST_ASSERT_EQ() so that
the test prints out debug information. Note, the test previously used
REPORT_GUEST_ASSERT_2(), but that was pointless because none of the
guest-side code passed any parameters to the assert.
Link: https://lore.kernel.org/r/20230729003643.1053367-21-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert the steal_time test to use printf-based GUEST_ASERT.
Opportunistically use GUEST_ASSERT_EQ() and GUEST_ASSERT_NE() so that the
test spits out debug information on failure.
Link: https://lore.kernel.org/r/20230729003643.1053367-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use printf-based guest assert reporting in ARM's vGIC IRQ test. Note,
this is not as innocuous as it looks! The printf-based version of
GUEST_ASSERT_EQ() ensures the expressions are evaluated only once, whereas
the old version did not!
Link: https://lore.kernel.org/r/20230729003643.1053367-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert ARM's debug exceptions test to use printf-based GUEST_ASSERT().
Opportunistically Use GUEST_ASSERT_EQ() in guest_code_ss() so that the
expected vs. actual values get printed out.
Link: https://lore.kernel.org/r/20230729003643.1053367-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert ARM's aarch_timer test to use printf-based GUEST_ASSERT().
To maintain existing functionality, manually print the host information,
e.g. stage and iteration, to stderr prior to reporting the guest assert.
Link: https://lore.kernel.org/r/20230729003643.1053367-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a test to exercise the various features in KVM selftest's local
snprintf() and compare them to LIBC's snprintf() to ensure they behave
the same.
This is not an exhaustive test. KVM's local snprintf() does not
implement all the features LIBC does, e.g. KVM's local snprintf() does
not support floats or doubles, so testing for those features were
excluded.
Testing was added for the features that are expected to work to
support a minimal version of printf() in the guest.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
[sean: use UCALL_EXIT_REASON, enable for all architectures]
Link: https://lore.kernel.org/r/20230731203026.1192091-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Define the expected architecture specific exit reason for a successful
ucall so that common tests can assert that a ucall occurred without the
test needing to implement arch specific code.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230731203026.1192091-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add an architecture specific ucall.h and inline the simple arch hooks,
e.g. the init hook for everything except ARM, and the actual "do ucall"
hook for everything except x86 (which should be simple, but temporarily
isn't due to carrying a workaround).
Having a per-arch ucall header will allow adding a #define for the
expected KVM exit reason for a ucall that is colocated (for everything
except x86) with the ucall itself.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230731203026.1192091-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add printf-based GUEST_ASSERT macros and accompanying host-side support to
provide an assert-specific versions of GUEST_PRINTF(). To make it easier
to parse assert messages, for humans and bots alike, preserve/use the same
layout as host asserts, e.g. in the example below, the reported expression,
file, line number, and message are from the guest assertion, not the host
reporting of the assertion.
The call stack still captures the host reporting, but capturing the guest
stack is a less pressing concern, i.e. can be done in the future, and an
optimal solution would capture *both* the host and guest stacks, i.e.
capturing the host stack isn't an outright bug.
Running soft int test
==== Test Assertion Failure ====
x86_64/svm_nested_soft_inject_test.c:39: regs->rip != (unsigned long)l2_guest_code_int
pid=214104 tid=214104 errno=4 - Interrupted system call
1 0x0000000000401b35: run_test at svm_nested_soft_inject_test.c:191
2 0x00000000004017d2: main at svm_nested_soft_inject_test.c:212
3 0x0000000000415b03: __libc_start_call_main at libc-start.o:?
4 0x000000000041714f: __libc_start_main_impl at ??:?
5 0x0000000000401660: _start at ??:?
Expected IRQ at RIP 0x401e50, received IRQ at 0x401e50
Don't bother sharing code between ucall_assert() and ucall_fmt(), as
forwarding the variable arguments would either require using macros or
building a va_list, i.e. would make the code less readable and/or require
just as much copy+paste code anyways.
Gate the new macros with a flag so that tests can more or less be switched
over one-by-one. The slow conversion won't be perfect, e.g. library code
won't pick up the flag, but the only asserts in library code are of the
vanilla GUEST_ASSERT() variety, i.e. don't print out variables.
Add a temporary alias to GUEST_ASSERT_1() to fudge around ARM's
arch_timer.h header using GUEST_ASSERT_1(), thus thwarting any attempt to
convert tests one-by-one.
Link: https://lore.kernel.org/r/20230729003643.1053367-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add more flexibility to guest debugging and testing by adding
GUEST_PRINTF() and GUEST_ASSERT_FMT() to the ucall framework.
Add a sized buffer to the ucall structure to hold the formatted string,
i.e. to allow the guest to easily resolve the string, and thus avoid the
ugly pattern of the host side having to make assumptions about the desired
format, as well as having to pass around a large number of parameters.
The buffer size was chosen to accommodate most use cases, and based on
similar usage. E.g. printf() uses the same size buffer in
arch/x86/boot/printf.c. And 1KiB ought to be enough for anybody.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
[sean: massage changelog, wrap macro param in ()]
Link: https://lore.kernel.org/r/20230729003643.1053367-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add additional pages to the guest to account for the number of pages
the ucall headers need. The only reason things worked before is the
ucall headers are fairly small. If they were ever to increase in
size the guest could run out of memory.
This is done in preparation for adding string formatting options to
the guest through the ucall framework which increases the size of
the ucall headers.
Fixes: 426729b2cf ("KVM: selftests: Add ucall pool based implementation")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230729003643.1053367-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a local version of guest_snprintf() for use in the guest.
Having a local copy allows the guest access to string formatting
options without dependencies on LIBC. LIBC is problematic because
it heavily relies on both AVX-512 instructions and a TLS, neither of
which are guaranteed to be set up in the guest.
The file guest_sprintf.c was lifted from arch/x86/boot/printf.c and
adapted to work in the guest, including the addition of buffer length.
I.e. s/sprintf/snprintf/
The functions where prefixed with "guest_" to allow guests to
explicitly call them.
A string formatted by this function is expected to succeed or die. If
something goes wrong during the formatting process a GUEST_ASSERT()
will be thrown.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/all/mtdi6smhur5rqffvpu7qux7mptonw223y2653x2nwzvgm72nlo@zyc4w3kwl3rg
[sean: add a link to the discussion of other options]
Link: https://lore.kernel.org/r/20230729003643.1053367-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add strnlen() to the string overrides to allow it to be called in the
guest.
The implementation for strnlen() was taken from the kernel's generic
version, lib/string.c.
This will be needed when printf() is introduced.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Link: https://lore.kernel.org/r/20230729003643.1053367-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Preserve or clobber all GPRs (except RIP and RSP, as they're saved and
restored via the VMCS) when performing a ucall on x86 to fudge around a
horrific long-standing bug in selftests' nested VMX support where L2's
GPRs are not preserved across a nested VM-Exit. I.e. if a test triggers a
nested VM-Exit to L1 in response to a ucall, e.g. GUEST_SYNC(), then L2's
GPR state can be corrupted.
The issues manifests as an unexpected #GP in clear_bit() when running the
hyperv_evmcs test due to RBX being used to track the ucall object, and RBX
being clobbered by the nested VM-Exit. The problematic hyperv_evmcs
testcase is where L0 (test's host userspace) injects an NMI in response to
GUEST_SYNC(8) from L2, but the bug could "randomly" manifest in any test
that induces a nested VM-Exit from L0. The bug hasn't caused failures in
the past due to sheer dumb luck.
The obvious fix is to rework the nVMX helpers to save/restore L2 GPRs
across VM-Exit and VM-Enter, but that is a much bigger task and carries
its own risks, e.g. nSVM does save/restore GPRs, but not in a thread-safe
manner, and there is a _lot_ of cleanup that can be done to unify code
for doing VM-Enter on nVMX, nSVM, and eVMCS.
Link: https://lore.kernel.org/r/20230729003643.1053367-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Clean up TEST_ASSERT_EQ() so that the (mostly) raw code is captured in the
main assert message, not the helper macro's code. E.g. make this:
x86_64/tsc_msrs_test.c:106: __a == __b
pid=40470 tid=40470 errno=0 - Success
1 0x000000000040170e: main at tsc_msrs_test.c:106
2 0x0000000000416f23: __libc_start_call_main at libc-start.o:?
3 0x000000000041856f: __libc_start_main_impl at ??:?
4 0x0000000000401ef0: _start at ??:?
TEST_ASSERT_EQ(rounded_host_rdmsr(MSR_IA32_TSC), val + 1) failed.
rounded_host_rdmsr(MSR_IA32_TSC) is 0
val + 1 is 0x1
look like this:
x86_64/tsc_msrs_test.c:106: rounded_host_rdmsr(MSR_IA32_TSC) == val + 1
pid=5737 tid=5737 errno=0 - Success
1 0x0000000000401714: main at tsc_msrs_test.c:106
2 0x0000000000415c23: __libc_start_call_main at libc-start.o:?
3 0x000000000041726f: __libc_start_main_impl at ??:?
4 0x0000000000401e60: _start at ??:?
0 != 0x1 (rounded_host_rdmsr(MSR_IA32_TSC) != val + 1)
Opportunstically clean up the formatting of the entire macro.
Link: https://lore.kernel.org/r/20230729003643.1053367-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
There is already an ASSERT_EQ macro in the file
tools/testing/selftests/kselftest_harness.h, so currently KVM selftests
can't include test_util.h from the KVM selftests together with that file.
Rename the macro in the KVM selftests to TEST_ASSERT_EQ to avoid the
problem - it is also more similar to the other macros in test_util.h that
way.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230712075910.22480-2-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Leon Hwang says:
====================
bpf, xdp: Add tracepoint to xdp attaching failure
This series introduces a new tracepoint in bpf_xdp_link_attach(). By
this tracepoint, error message will be captured when error happens in
dev_xdp_attach(), e.g. invalid attaching flags.
v4 -> v5:
* Initialise the extack variable.
* Fix code style issue of variable declaration lines.
v3 -> v4:
* Fix selftest-crashed issue.
====================
Link: https://lore.kernel.org/r/20230801142621.7925-1-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test case for the tracepoint of xdp attaching failure by bpf
tracepoint when attach XDP to a device with invalid flags option.
The bpf tracepoint retrieves error message from the tracepoint, and
then put the error message to a perf buffer. The testing code receives
error message from perf buffer, and then ASSERT "Invalid XDP flags for
BPF link attachment".
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20230801142621.7925-3-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When error happens in dev_xdp_attach(), it should have a way to tell
users the error message like the netlink approach.
To avoid breaking uapi, adding a tracepoint in bpf_xdp_link_attach() is
an appropriate way to notify users the error message.
Hence, bpf libraries are able to retrieve the error message by this
tracepoint, and then report the error message to users.
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20230801142621.7925-2-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
commit bdeeed3498 ("libbpf: fix offsetof() and container_of() to work with CO-RE")
...was backported to stable trees such as 5.15. The problem is that with older
LLVM/clang (14/15) - which is often used for older kernels - we see compilation
failures in BPF selftests now:
In file included from progs/test_cls_redirect_subprogs.c:2:
progs/test_cls_redirect.c:90:2: error: static assertion expression is not an integral constant expression
sizeof(flow_ports_t) !=
^~~~~~~~~~~~~~~~~~~~~~~
progs/test_cls_redirect.c:91:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
offsetofend(struct bpf_sock_tuple, ipv4.dport) -
^
progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend'
(offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof'
^
In file included from progs/test_cls_redirect_subprogs.c:2:
progs/test_cls_redirect.c:95:2: error: static assertion expression is not an integral constant expression
sizeof(flow_ports_t) !=
^~~~~~~~~~~~~~~~~~~~~~~
progs/test_cls_redirect.c:96:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
offsetofend(struct bpf_sock_tuple, ipv6.dport) -
^
progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend'
(offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof'
^
2 errors generated.
make: *** [Makefile:594: tools/testing/selftests/bpf/test_cls_redirect_subprogs.bpf.o] Error 1
The problem is the new offsetof() does not play nice with static asserts.
Given that the context is a static assert (and CO-RE relocation is not
needed at compile time), offsetof() usage can be replaced by restoring
the original offsetof() definition as __builtin_offsetof().
Fixes: bdeeed3498 ("libbpf: fix offsetof() and container_of() to work with CO-RE")
Reported-by: Colm Harrington <colm.harrington@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230802073906.3197480-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_probe_read_kernel() has a __weak definition in core.c and another
definition with an incompatible prototype in kernel/trace/bpf_trace.c,
when CONFIG_BPF_EVENTS is enabled.
Since the two are incompatible, there cannot be a shared declaration in
a header file, but the lack of a prototype causes a W=1 warning:
kernel/bpf/core.c:1638:12: error: no previous prototype for 'bpf_probe_read_kernel' [-Werror=missing-prototypes]
On 32-bit architectures, the local prototype
u64 __weak bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr)
passes arguments in other registers as the one in bpf_trace.c
BPF_CALL_3(bpf_probe_read_kernel, void *, dst, u32, size,
const void *, unsafe_ptr)
which uses 64-bit arguments in pairs of registers.
As both versions of the function are fairly simple and only really
differ in one line, just move them into a header file as an inline
function that does not add any overhead for the bpf_trace.c callers
and actually avoids a function call for the other one.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ac25cb0f-b804-1649-3afb-1dc6138c2716@iogearbox.net/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230801111449.185301-1-arnd@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Don't nullify "nodep" to NULL one line before it's set to "tmp".
Signed-off-by: Minjie Du <duminjie@vivo.com>
Link: https://lore.kernel.org/r/20230704122148.11573-1-duminjie@vivo.com
[sean: massage shortlog+changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit 6724a76cff ("riscv: ftrace: Reduce the detour code size to
half") optimizes the detour code size of kernel functions to half with
T0 register and the upcoming DYNAMIC_FTRACE_WITH_DIRECT_CALLS of riscv
is based on this optimization, we need to adapt riscv bpf trampoline
based on this. One thing to do is to reduce detour code size of bpf
programs, and the second is to deal with the return address after the
execution of bpf trampoline. Meanwhile, we need to construct the frame
of parent function, otherwise we will miss one layer when unwinding.
The related tests have passed.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230721100627.2630326-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>