Add a vPMU test scenario to validate the userspace accesses for
the registers PM{C,I}NTEN{SET,CLR} and PMOVS{SET,CLR} to ensure
that KVM honors the architectural definitions of these registers
for a given PMCR.N.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-13-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add a new test case to the vpmu_counter_access test to check
if PMU registers or their bits for unimplemented counters are not
accessible or are RAZ, as expected.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-12-rananta@google.com
[Oliver: fix issues relating to exception return address]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add a new test case to the vpmu_counter_access test to check if PMU
registers or their bits for implemented counters on the vCPU are
readable/writable as expected, and can be programmed to count events.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-11-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Introduce vpmu_counter_access test for arm64 platforms.
The test configures PMUv3 for a vCPU, sets PMCR_EL0.N for the vCPU,
and check if the guest can consistently see the same number of the
PMU event counters (PMCR_EL0.N) that userspace sets.
This test case is done with each of the PMCR_EL0.N values from
0 to 31 (With the PMCR_EL0.N values greater than the host value,
the test expects KVM_SET_ONE_REG for the PMCR_EL0 to fail).
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-10-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Import kernel's include/linux/perf/arm_pmuv3.h, with the
definition of PMEVN_SWITCH() additionally including an assert()
for the 'default' case. The following patches will use macros
defined in this header.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-9-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
KVM does not yet support userspace modifying PMCR_EL0.N (With
the previous patch, KVM ignores what is written by userspace).
Add support userspace limiting PMCR_EL0.N.
Disallow userspace to set PMCR_EL0.N to a value that is greater
than the host value as KVM doesn't support more event counters
than what the host HW implements. Also, make this register
immutable after the VM has started running. To maintain the
existing expectations, instead of returning an error, KVM
returns a success for these two cases.
Finally, ignore writes to read-only bits that are cleared on
vCPU reset, and RES{0,1} bits (including writable bits that
KVM doesn't support yet), as those bits shouldn't be modified
(at least with the current KVM).
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20231020214053.2144305-8-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
For unimplemented counters, the registers PM{C,I}NTEN{SET,CLR}
and PMOVS{SET,CLR} are expected to have the corresponding bits RAZ.
Hence to ensure correct KVM's PMU emulation, mask out the RES0 bits.
Defer this work to the point that userspace can no longer change the
number of advertised PMCs.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-7-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
For unimplemented counters, the bits in PM{C,I}NTEN{SET,CLR} and
PMOVS{SET,CLR} registers are expected to RAZ. To honor this,
explicitly implement the {get,set}_user functions for these
registers to mask out unimplemented counters for userspace reads
and writes.
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20231020214053.2144305-6-rananta@google.com
[Oliver: drop unnecessary locking]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The number of PMU event counters is indicated in PMCR_EL0.N.
For a vCPU with PMUv3 configured, the value is set to the same
value as the current PE on every vCPU reset. Unless the vCPU is
pinned to PEs that has the PMU associated to the guest from the
initial vCPU reset, the value might be different from the PMU's
PMCR_EL0.N on heterogeneous PMU systems.
Fix this by setting the vCPU's PMCR_EL0.N to the PMU's PMCR_EL0.N
value. Track the PMCR_EL0.N per guest, as only one PMU can be set
for the guest (PMCR_EL0.N must be the same for all vCPUs of the
guest), and it is convenient for updating the value.
To achieve this, the patch introduces a helper,
kvm_arm_pmu_get_max_counters(), that reads the maximum number of
counters from the arm_pmu associated to the VM. Make the function
global as upcoming patches will be interested to know the value
while setting the PMCR.N of the guest from userspace.
KVM does not yet support userspace modifying PMCR_EL0.N.
The following patch will add support for that.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20231020214053.2144305-5-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add a helper to read a vCPU's PMCR_EL0, and use it whenever KVM
reads a vCPU's PMCR_EL0.
Currently, the PMCR_EL0 value is tracked per vCPU. The following
patches will make (only) PMCR_EL0.N track per guest. Having the
new helper will be useful to combine the PMCR_EL0.N field
(tracked per guest) and the other fields (tracked per vCPU)
to provide the value of PMCR_EL0.
No functional change intended.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-4-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Future changes to KVM's sysreg emulation will rely on having a valid PMU
instance to determine the number of implemented counters (PMCR_EL0.N).
This is earlier than when userspace is expected to modify the vPMU
device attributes, where the default is selected today.
Select the default PMU when handling KVM_ARM_VCPU_INIT such that it is
available in time for sysreg emulation.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20231020214053.2144305-3-rananta@google.com
[Oliver: rewrite changelog]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Use FIELD_GET() to remove dependences on the field position, i.e., the
shift value. No functional change intended.
Link: https://lore.kernel.org/r/20231010204436.1000644-11-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Use FIELD_GET() to remove dependences on the field position, i.e., the
shift value. No functional change intended.
Link: https://lore.kernel.org/r/20231010204436.1000644-10-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Use FIELD_GET() and FIELD_PREP() to remove dependences on the field
position, i.e., the shift value. No functional change intended.
Link: https://lore.kernel.org/r/20231010204436.1000644-9-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Use FIELD_GET() to remove dependences on the field position, i.e., the
shift value. No functional change intended.
Link: https://lore.kernel.org/r/20231010204436.1000644-8-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Use FIELD_GET() to remove dependences on the field position, i.e., the
shift value. No functional change intended.
Link: https://lore.kernel.org/r/20231010204436.1000644-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
The PASID Capability and Control registers are both 16 bits wide. Use
16-bit wide constants in field names to match the register width. No
functional change intended.
Link: https://lore.kernel.org/r/20231010204436.1000644-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
aspm_attr_store_common(), which handles sysfs control of ASPM, has the same
problem as fb097dcd5a ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver
disables L1"): disabling L1 adds only ASPM_L1 (but not any of the L1.x
substates) to the "aspm_disable" mask.
Enabling one substate, e.g., L1.1, via sysfs removes ASPM_L1 from the
disable mask. Since disabling L1 via sysfs doesn't add any of the
substates to the disable mask, enabling L1.1 actually enables *all* the
substates.
In this scenario:
- Write 0 to "l1_aspm" to disable L1
- Write 1 to "l1_1_aspm" to enable L1.1
the intention is to disable L1 and all L1.x substates, then enable just
L1.1, but in fact, *all* L1.x substates are enabled.
Fix this by explicitly disabling all the L1.x substates when disabling L1.
Fixes: 72ea91afbf ("PCI/ASPM: Add sysfs attributes for controlling ASPM link states")
Link: https://lore.kernel.org/r/6ba7dd79-9cfe-4ed0-a002-d99cb842f361@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
This reverts commit fb097dcd5a.
After fb097dcd5a ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver
disables L1"), disabling L1 via pci_disable_link_state(PCIE_LINK_STATE_L1),
then enabling one substate, e.g., L1.1, via sysfs actually enables *all*
the substates.
For example, r8169 disables L1 because of hardware issues on a number of
systems, which implicitly disables the L1.1 and L1.2 substates.
On some systems, L1 and L1.1 work fine, but L1.2 causes missed rx packets.
Enabling L1.1 via the sysfs "aspm_l1_1" attribute unexpectedly enables L1.2
as well as L1.1.
After fb097dcd5a, pci_disable_link_state(PCIE_LINK_STATE_L1) adds only
ASPM_L1 (but not any of the L1.x substates) to the "aspm_disable" mask:
--- Before fb097dcd5a
+++ After fb097dcd5a
# r8169 disables L1:
pci_disable_link_state(PCIE_LINK_STATE_L1)
- disable |= ASPM_L1 | ASPM_L1_1 | ASPM_L1_2 | ... # disable L1, L1.x
+ disable |= ASPM_L1 # disable L1 only
# write "1" to sysfs "aspm_l1_1" attribute:
l1_1_aspm
aspm_attr_store_common(state = ASPM_L1_1)
disable &= ~ASPM_L1_1 # enable L1.1
if (state & (ASPM_L1_1 | ...)) # if enabling any substate
disable &= ~ASPM_L1 # enable L1
# final state:
- disable = ASPM_L1_2 | ... # L1, L1.1 enabled; L1.2 disabled
+ disable = 0 # L1, L1.1, L1.2 all enabled
Enabling an L1.x substate removes the substate and L1 from the
"aspm_disable" mask. After fb097dcd5a, the substates were not added to
the mask when disabling L1, so enabling one substate implicitly enables all
of them.
Revert fb097dcd5a so enabling one substate doesn't enable the others.
Link: https://lore.kernel.org/r/c75931ac-7208-4200-9ca1-821629cf5e28@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[bhelgaas: work through example in commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Commit 5e42bcbc3f ("cxl/region: decrement ->nr_targets on error in
cxl_region_attach()") tried to avoid 'eiw' initialization errors when
->nr_targets exceeded 16, by just decrementing ->nr_targets when
cxl_region_setup_targets() failed.
Commit 86987c7662 ("cxl/region: Cleanup target list on attach error")
extended that cleanup to also clear cxled->pos and p->targets[pos]. The
initialization error was incidentally fixed separately by:
Commit 8d42854257 ("cxl/region: Fix port setup uninitialized variable
warnings") which was merged a few days after 5e42bcbc3f.
But now the original cleanup when cxl_region_setup_targets() fails
prevents endpoint and switch decoder resources from being reused:
1) the cleanup does not set the decoder's region to NULL, which results
in future dpa_size_store() calls returning -EBUSY
2) the decoder is not properly freed, which results in future commit
errors associated with the upstream switch
Now that the initialization errors were fixed separately, the proper
cleanup for this case is to just return immediately. Then the resources
associated with this target get cleanup up as normal when the failed
region is deleted.
The ->nr_targets decrement in the error case also helped prevent
a p->targets[] array overflow, so add a new check to prevent against
that overflow.
Tested by trying to create an invalid region for a 2 switch * 2 endpoint
topology, and then following up with creating a valid region.
Fixes: 5e42bcbc3f ("cxl/region: decrement ->nr_targets on error in cxl_region_attach()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169703589120.1202031.14696100866518083806.stgit@bgt-140510-bm03.eng.stellus.in
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct reset_control_array.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175229.work.838-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct port_buffer.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Amit Shah <amit@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: virtualization@lists.linux-foundation.org
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Amit Shah <amit@kernel.org>
Link: https://lore.kernel.org/r/20230922175115.work.059-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The mtty driver exposes a PCI serial device to userspace and therefore
makes an easy target for a sample device supporting migration. The device
does not make use of DMA, therefore we can easily claim support for the
migration P2P states, as well as dirty logging. This implementation also
makes use of PRE_COPY support in order to provide migration stream
compatibility testing, which should generally be considered good practice.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20231016224736.2575718-3-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The mtty driver does not currently conform to the vfio SET_IRQS uAPI.
For example, it claims to support mask and unmask of INTx, but actually
does nothing. It claims to support AUTOMASK for INTx, but doesn't. It
fails to teardown eventfds under the full semantics specified by the
SET_IRQS ioctl. It also fails to teardown eventfds when the device is
closed, leading to memory leaks. It claims to support the request IRQ,
but doesn't.
Fix all these.
A side effect of this is that QEMU will now report a warning:
vfio <uuid>: Failed to set up UNMASK eventfd signaling for interrupt \
INTX-0: VFIO_DEVICE_SET_IRQS failure: Inappropriate ioctl for device
The fact is that the unmask eventfd was never supported but quietly
failed. mtty never honored the AUTOMASK behavior, therefore there
was nothing to unmask. QEMU is verbose about the failure, but
properly falls back to userspace unmasking.
Fixes: 9d1a546c53 ("docs: Sample driver to demonstrate how to use Mediated device framework.")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20231016224736.2575718-2-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Change ifconfig with ip command, on a system where ifconfig is
not used this script will not work correcly.
Test result with this patchset:
sudo make TARGETS="net" kselftest
....
TAP version 13
1..1
timeout set to 1500
selftests: net: route_localnet.sh
run arp_announce test
net.ipv4.conf.veth0.route_localnet = 1
net.ipv4.conf.veth1.route_localnet = 1
net.ipv4.conf.veth0.arp_announce = 2
net.ipv4.conf.veth1.arp_announce = 2
PING 127.25.3.14 (127.25.3.14) from 127.25.3.4 veth0: 56(84)
bytes of data.
64 bytes from 127.25.3.14: icmp_seq=1 ttl=64 time=0.038 ms
64 bytes from 127.25.3.14: icmp_seq=2 ttl=64 time=0.068 ms
64 bytes from 127.25.3.14: icmp_seq=3 ttl=64 time=0.068 ms
64 bytes from 127.25.3.14: icmp_seq=4 ttl=64 time=0.068 ms
64 bytes from 127.25.3.14: icmp_seq=5 ttl=64 time=0.068 ms
--- 127.25.3.14 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4073ms
rtt min/avg/max/mdev = 0.038/0.062/0.068/0.012 ms
ok
run arp_ignore test
net.ipv4.conf.veth0.route_localnet = 1
net.ipv4.conf.veth1.route_localnet = 1
net.ipv4.conf.veth0.arp_ignore = 3
net.ipv4.conf.veth1.arp_ignore = 3
PING 127.25.3.14 (127.25.3.14) from 127.25.3.4 veth0: 56(84)
bytes of data.
64 bytes from 127.25.3.14: icmp_seq=1 ttl=64 time=0.032 ms
64 bytes from 127.25.3.14: icmp_seq=2 ttl=64 time=0.065 ms
64 bytes from 127.25.3.14: icmp_seq=3 ttl=64 time=0.066 ms
64 bytes from 127.25.3.14: icmp_seq=4 ttl=64 time=0.065 ms
64 bytes from 127.25.3.14: icmp_seq=5 ttl=64 time=0.065 ms
--- 127.25.3.14 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4092ms
rtt min/avg/max/mdev = 0.032/0.058/0.066/0.013 ms
ok
ok 1 selftests: net: route_localnet.sh
...
Signed-off-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231023123422.2895-1-swarupkotikalapudi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- don't drop all unprotected public action frames since
some don't have a protected dual
- fix pointer confusion in scanning code
- fix warning in some connections with multiple links
-----BEGIN PGP SIGNATURE-----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=AvmQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Three more fixes:
- don't drop all unprotected public action frames since
some don't have a protected dual
- fix pointer confusion in scanning code
- fix warning in some connections with multiple links
* tag 'wireless-2023-10-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: don't drop all unprotected public action frames
wifi: cfg80211: fix assoc response warning on failed links
wifi: cfg80211: pass correct pointer to rdev_inform_bss()
====================
Link: https://lore.kernel.org/r/20231024103540.19198-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli says:
====================
Switch DSA to inclusive terminology
One of the action items following Netconf'23 is to switch subsystems to
use inclusive terminology. DSA has been making extensive use of the
"master" and "slave" words which are now replaced by "conduit" and
"user" respectively.
====================
Link: https://lore.kernel.org/r/20231023181729.1191071-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This preserves the existing IFLA_DSA_MASTER which is part of the uAPI
and creates an alias named IFLA_DSA_CONDUIT.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-3-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before the refactoring the pr_warn() only triggered when
someone explicitly tried to write to a BIOS locked limit.
After the refactoring the warning is also triggering during
system resume. The user can't do anything about this so
printing scary warnings doesn't make sense
Keep the printk but make it pr_debug() instead of pr_warn()
to make it clear it's not a serious issue.
Fixes: 9050a9cd5e ("powercap: intel_rapl: Cleanup Power Limits support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Compiler warns about a possible format-overflow in tsnep_request_irq():
drivers/net/ethernet/engleder/tsnep_main.c:884:55: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=]
sprintf(queue->name, "%s-rx-%d", name,
^
drivers/net/ethernet/engleder/tsnep_main.c:881:55: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=]
sprintf(queue->name, "%s-tx-%d", name,
^
drivers/net/ethernet/engleder/tsnep_main.c:878:49: warning: '-txrx-' directive writing 6 bytes into a region of size between 5 and 25 [-Wformat-overflow=]
sprintf(queue->name, "%s-txrx-%d", name,
^~~~~~
Actually overflow cannot happen. Name is limited to IFNAMSIZ, because
netdev_name() is called during ndo_open(). queue_index is single char,
because less than 10 queues are supported.
Fix warning with snprintf(). Additionally increase buffer to 32 bytes,
because those 7 additional bytes were unused anyway.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310182028.vmDthIUa-lkp@intel.com/
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231023183856.58373-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The binding for the inno usb2 phy was given a name in more a common format,
so update the reference in rockchip,dwc3.yaml as well.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/f8747552-d23b-c4cd-cb17-5033fb7f8eb6@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Jakub Kicinski says:
====================
net: deduplicate netdev name allocation
After recent fixes we have even more duplicated code in netdev name
allocation helpers. There are two complications in this code.
First, __dev_alloc_name() clobbers its output arg even if allocation
fails, forcing callers to do extra copies. Second as our experience in
commit 55a5ec9b77 ("Revert "net: core: dev_get_valid_name is now the same as dev_alloc_name_ns"") and
commit 029b6d1405 ("Revert "net: core: maybe return -EEXIST in __dev_alloc_name"")
taught us, user space is very sensitive to the exact error codes.
Align the callers of __dev_alloc_name(), and remove some of its
complexity.
v1: https://lore.kernel.org/all/20231020011856.3244410-1-kuba@kernel.org/
====================
Link: https://lore.kernel.org/r/20231023152346.3639749-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unnecessary else clauses after return.
I copied this if / else construct from somewhere,
it makes the code harder to read.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231023152346.3639749-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prior to restructuring __dev_alloc_name() handled both printf
and non-printf names. In a clever attempt at code reuse it
always prints the name into a buffer and checks if it's
a duplicate.
Trust the bitmap, and return an error if its full.
This shrinks the possible ID space by one from 32K to 32K - 1,
as previously the max value would have been tried as a valid ID.
It seems very unlikely that anyone would care as we heard
no requests to increase the max beyond 32k.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231023152346.3639749-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All callers of __dev_valid_name() go thru dev_prep_valid_name()
which handles the non-printf case. Focus __dev_alloc_name() on
the sprintf case, remove the indentation level.
Minor functional change of returning -EINVAL if % is not found,
which should now never happen.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231023152346.3639749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__dev_alloc_name() handles both the sprintf and non-sprintf
target names. This complicates the code.
dev_prep_valid_name() already handles the non-sprintf case,
before calling __dev_alloc_name(), make the only other caller
also go thru dev_prep_valid_name(). This way we can drop
the non-sprintf handling in __dev_alloc_name() in one of
the next changes.
commit 55a5ec9b77 ("Revert "net: core: dev_get_valid_name is now the same as dev_alloc_name_ns"") and
commit 029b6d1405 ("Revert "net: core: maybe return -EEXIST in __dev_alloc_name"")
tell us that we can't start returning -EEXIST from dev_alloc_name()
on name duplicates. Bite the bullet and pass the expected errno to
dev_prep_valid_name().
dev_prep_valid_name() must now propagate out the allocated id
for printf names.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231023152346.3639749-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Callers of __dev_alloc_name() want to pass dev->name as
the output buffer. Make __dev_alloc_name() not clobber
that buffer on failure, and remove the workarounds
in callers.
dev_alloc_name_ns() is now completely unnecessary.
The extra strscpy() added here will be gone by the end
of the patch series.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231023152346.3639749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3c0897c180 ("cpufreq: Use scnprintf() for avoiding potential
buffer overflow") switched from snprintf to the more secure scnprintf
but never updated the exit condition for PAGE_SIZE.
As the commit say and as scnprintf document, what scnprintf returns what
is actually written not counting the '\0' end char. This results in the
case of len exceeding the size, len set to PAGE_SIZE - 1, as it can be
written at max PAGE_SIZE - 1 (as '\0' is not counted)
Because of len is never set to PAGE_SIZE, the function never break early,
never prints the warning and never return -EFBIG.
Fix this by changing the condition to PAGE_SIZE - 1 to correctly trigger
the error.
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Fixes: 3c0897c180 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mat Martineau says:
====================
mptcp: convert Netlink code to use YAML spec
This series from Davide converts most of the MPTCP Netlink interface
(plus uAPI bits) to use sources generated by YNL using a YAML spec file.
This new YAML file is useful to validate the API and to generate a good
documentation page.
Patch 1 modifies YNL spec to support "uns-admin-perm" for genetlink
legacy.
Patch 2 adds support for validating exact length of netlink attrs.
Patch 3 converts Netlink structures from small_ops to ops to prepare the
switch to YAML.
Patch 4 adds the Netlink YAML spec for MPTCP.
Patch 5 adds and uses a new header file generated from the new YAML
spec.
Patch 6 renames some handlers to match the ones generated from the YAML
spec.
Patch 7 adds and uses Netlink policies automatically generated from the
YAML spec.
====================
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-0-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
in the current MPTCP control plane, all operations use a netlink
attribute of the same type "MPTCP_PM_ATTR". However, add/del/get/flush
operations only parse the first element in the message _ the one that
describes MPTCP endpoints (that was named MPTCP_PM_ATTR_ADDR and
mostly used in ADD_ADDR operations _ probably the similarity of "attr",
"addr" and "add" might cause some confusion to human readers).
Convert MPTCP from 'small_ops' to 'ops', thus allowing different attributes
for each single operation, hopefully makes all this clearer to human
readers.
- use a separate attribute set for add/del/get/flush address operation,
binary compatible with the existing one, to store the endpoint address.
MPTCP_PM_ENDPOINT_ADDR is added to the uAPI (with the same value as
MPTCP_PM_ATTR_ADDR) for these operations.
- convert mptcp_pm_ops[] and add policy files accordingly.
this prepares MPTCP control plane to be described as YAML spec.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/340
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-3-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
this flag maps to GENL_UNS_ADMIN_PERM and will be used by future specs.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-1-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
