For reports that are not powers of 2, reports at the end of the OA
buffer may get split across the buffer boundary. When zeroing out such
reports, take the split into consideration.
v2: Use OA_BUFFER_SIZE (Ashutosh)
Fixes: 09a36015d9 ("drm/i915/perf: Clear out entire reports after reading if not power of 2 size")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616173402.699776-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 40b1588a75)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
If we are using Bigjoiner dpll_hw_state is supposed to be exactly
same as for master crtc, so no need to save it's state for slave crtc.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 0ff0e219d9 ("drm/i915: Compute clocks earlier")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230628141017.18937-1-stanislav.lisovskiy@intel.com
(cherry picked from commit cbaf758809)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
poison_cfi() was introduced in:
9831c6253a ("x86/cfi: Extend ENDBR sealing to kCFI")
... but it's only ever used under CONFIG_X86_KERNEL_IBT=y,
and if that option is disabled, we get:
arch/x86/kernel/alternative.c:1243:13: error: ‘poison_cfi’ defined but not used [-Werror=unused-function]
Guard the definition with CONFIG_X86_KERNEL_IBT.
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Enables use of GIC PPI#15 for OP-TEE asynchronous notifications
on stm32mp13 platforms.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
GIC700 erratum 2941627 may cause GIC-700 missing SPIs wake
requests when SPIs are deactivated while targeting a
sleeping CPU - ie a CPU for which the redistributor:
GICR_WAKER.ProcessorSleep == 1
This runtime situation can happen if an SPI that has been
activated on a core is retargeted to a different core, it
becomes pending and the target core subsequently enters a
power state quiescing the respective redistributor.
When this situation is hit, the de-activation carried out
on the core that activated the SPI (through either ICC_EOIR1_EL1
or ICC_DIR_EL1 register writes) does not trigger a wake
requests for the sleeping GIC redistributor even if the SPI
is pending.
Work around the erratum by de-activating the SPI using the
redistributor GICD_ICACTIVER register if the runtime
conditions require it (ie the IRQ was retargeted between
activation and de-activation).
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230704155034.148262-1-lpieralisi@kernel.org
Wei Fang says:
====================
net: fec: fix some issues of ndo_xdp_xmit()
We encountered some issues when testing the ndo_xdp_xmit() interface
of the fec driver on i.MX8MP and i.MX93 platforms. These issues are
easy to reproduce, and the specific reproduction steps are as follows.
step1: The ethernet port of a board (board A) is connected to the EQOS
port of i.MX8MP/i.MX93, and the FEC port of i.MX8MP/i.MX93 is connected
to another ethernet port, such as a switch port.
step2: Board A uses the pktgen_sample03_burst_single_flow.sh to generate
and send packets to i.MX8MP/i.MX93. The command is shown below.
./pktgen_sample03_burst_single_flow.sh -i eth0 -d 192.168.6.8 -m \
56:bf:0d:68:b0:9e -s 1500
step3: i.MX8MP/i.MX93 use the xdp_redirect bfp program to redirect the
XDP frames from EQOS port to FEC port. The command is shown below.
./xdp_redirect eth1 eth0
After a few moments, the warning or error logs will be printed in the
console, for more details, please refer to the commit message of each
patch.
====================
Link: https://lore.kernel.org/r/20230706081012.2278063-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the case of heavy XDP traffic to be transmitted, the console
will print the error log continuously if there are lack of enough
BDs to accommodate the frames. The log looks like below.
[ 160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG!
Not only will this log be replicated and redundant, it will also
degrade XDP performance. So we use netdev_err_once() instead of
netdev_err() now.
Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the XDP feature is enabled and with heavy XDP frames to be
transmitted, there is a considerable probability that available
tx BDs are insufficient. This will lead to some XDP frames to be
discarded and the "NOT enough BD for SG!" error log will appear
in the console (as shown below).
[ 160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG!
In the case of heavy XDP traffic, sometimes the speed of recycling
tx BDs may be slower than the speed of sending XDP frames. There
may be several specific reasons, such as the interrupt is not
responsed in time, the efficiency of the NAPI callback function is
too low due to all the queues (tx queues and rx queues) share the
same NAPI, and so on.
After trying various methods, I think that increase the size of tx
BD ring is simple and effective. Maybe the best resolution is that
allocate NAPI for each queue to improve the efficiency of the NAPI
callback, but this change is a bit big and I didn't try this method.
Perheps this method will be implemented in a future patch.
This patch also updates the tx_wake_threshold of tx ring which is
related to the size of tx ring in the previous logic. Otherwise,
the tx_wake_threshold will be too high (403 BDs), which is more
likely to impact the slow path in the case of heavy XDP traffic,
because XDP path and slow path share the tx BD rings. According
to Jakub's suggestion, the tx_wake_threshold is at least equal to
tx_stop_threshold + 2 * MAX_SKB_FRAGS, if a queue of hundreds of
entries is overflowing, we should be able to apply a hysteresis
of a few tens of entries.
Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Once the XDP frames have been successfully transmitted through the
ndo_xdp_xmit() interface, it's the driver responsibility to free
the frames so that the page_pool can recycle the pages and reuse
them. However, this action is not implemented in the fec driver.
This leads to a user-visible problem that the console will print
the following warning log.
[ 157.568851] page_pool_release_retry() stalled pool shutdown 1389 inflight 60 sec
[ 217.983446] page_pool_release_retry() stalled pool shutdown 1389 inflight 120 sec
[ 278.399006] page_pool_release_retry() stalled pool shutdown 1389 inflight 181 sec
[ 338.812885] page_pool_release_retry() stalled pool shutdown 1389 inflight 241 sec
[ 399.226946] page_pool_release_retry() stalled pool shutdown 1389 inflight 302 sec
Therefore, to solve this issue, we free XDP frames via xdp_return_frame()
while cleaning the tx BD ring.
Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a XDP program is installed or uninstalled, fec_restart() will
be invoked to reset MAC and buffer descriptor rings. It's reasonable
not to transmit any packet during the process of reset. However, the
NETDEV_XDP_ACT_NDO_XMIT bit of xdp_features is enabled by default,
that is to say, it's possible that the fec_enet_xdp_xmit() will be
invoked even if the process of reset is not finished. In this case,
the redirected XDP frames might be dropped and available transmit BDs
may be incorrectly deemed insufficient. So this patch disable the
NETDEV_XDP_ACT_NDO_XMIT feature by default and dynamically configure
this feature when the bpf program is installed or uninstalled.
Fixes: e4ac7cc6e5 ("net: fec: turn on XDP features")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Linux Automation Test Automation Controller (LXA TAC)[1] is an embedded
software development tool built around the Octavo Systems OSD32MP15x SiP.
The device contains an eMMC for storage, a DSA-capable on board ethernet
switch with two external ports, dual CAN busses, a power switch to turn
a device under test on or off and some other I/O.
As of now there are two STM32MP157 based hardware generations (Gen 1 and
Gen 2) that have most of their hardware config in common.
In the future there will also be a STM32MP153 based hardware generation.
[1]: https://www.linux-automation.com/en/products/lxa-tac.html
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add DT compatible string for Linux Automation GmbH Test Automation
Controllers (LXA TAC).
LXA TACs are a development tool for embedded devices with a focus on
embedded Linux devices.
As of now there are two STM32MP157 based hardware generations (Gen 1 and
Gen 2) that have most of their hardware config in common.
In the future there will also be a STM32MP153 based hardware generation.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add pinmux groups required for the Linux Automation GmbH TAC.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The ksz switch driver allows specifying an interrupt line to prevent
having to periodically poll the switch for link ups/downs and other
asynchronous events.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This allows the usage of properties like termination-gpios and
termination-ohms, which are specified in can-controller.yaml
but were previously not usable due to additionalProperties: false.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Suggested-by: Rob Herring <robh@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Currently the SLUB code represents encoded freelist entries as "void*".
That's misleading, those things are encoded under
CONFIG_SLAB_FREELIST_HARDENED so that they're not actually dereferencable.
Give them their own type, and split freelist_ptr() into one function per
direction (one for encoding, one for decoding).
Signed-off-by: Jann Horn <jannh@google.com>
Co-developed-by: Matteo Rizzo <matteorizzo@google.com>
Signed-off-by: Matteo Rizzo <matteorizzo@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
realloc() and reallocarray() can either return NULL or a special
non-NULL pointer, if their size argument is zero. This requires a bit
more care to handle NULL-as-valid-result situation differently from
NULL-as-error case. This has caused real issues before ([0]), and just
recently bit again in production when performing bpf_program__attach_usdt().
This patch fixes 4 places that do or potentially could suffer from this
mishandling of NULL, including the reported USDT-related one.
There are many other places where realloc()/reallocarray() is used and
NULL is always treated as an error value, but all those have guarantees
that their size is always non-zero, so those spot don't need any extra
handling.
[0] d08ab82f59 ("libbpf: Fix double-free when linker processes empty sections")
Fixes: 999783c8bb ("libbpf: Wire up spec management and other arch-independent USDT logic")
Fixes: b63b3c490e ("libbpf: Add bpf_program__set_insns function")
Fixes: 697f104db8 ("libbpf: Support custom SEC() handlers")
Fixes: b126882672 ("libbpf: Change the order of data and text relocations.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230711024150.1566433-1-andrii@kernel.org
SC7180 - just like SC7280 - has a BWMONv4 for CPU-LLCC and a BWMONv5
for DDR-LLCC paths. Document them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230616-topic-sc7180_bwmons-v1-1-4ddb96f9a6cd@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
In order to generate the prologue and epilogue, the BPF JIT needs to
know which registers that are clobbered. Therefore, the during
pre-final passes, the prologue is generated after the body of the
program body-prologue-epilogue. Then, in the final pass, a proper
prologue-body-epilogue JITted image is generated.
This scheme has worked most of the time. However, for some large
programs with many jumps, e.g. the test_kmod.sh BPF selftest with
hardening enabled (blinding constants), this has shown to be
incorrect. For the final pass, when the proper prologue-body-epilogue
is generated, the image has not converged. This will lead to that the
final image will have incorrect jump offsets. The following is an
excerpt from an incorrect image:
| ...
| 3b8: 00c50663 beq a0,a2,3c4 <.text+0x3c4>
| 3bc: 0020e317 auipc t1,0x20e
| 3c0: 49630067 jalr zero,1174(t1) # 20e852 <.text+0x20e852>
| ...
| 20e84c: 8796 c.mv a5,t0
| 20e84e: 6422 c.ldsp s0,8(sp) # Epilogue start
| 20e850: 6141 c.addi16sp sp,16
| 20e852: 853e c.mv a0,a5 # Incorrect jump target
| 20e854: 8082 c.jr ra
The image has shrunk, and the epilogue offset is incorrect in the
final pass.
Correct the problem by always generating proper prologue-body-epilogue
outputs, which means that the first pass will only generate the body
to track what registers that are touched.
Fixes: 2353ecc6f9 ("bpf, riscv: add BPF JIT for RV64G")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230710074131.19596-1-bjorn@kernel.org
These labels are now redundant and don't do anything, let's remove them.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
No need for manual kfree in the error path and the remove function.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Remove unnecessary release_mem_region from the error path to prevent
mem region from being released twice, which could avoid resource leak
or other unexpected issues.
Fixes: b083c22d51 ("video: fbdev: imxfb: Convert request_mem_region + ioremap to devm_ioremap_resource")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
SIMPLE_DEV_PM_OPS is deprecated, replace it with DEFINE_SIMPLE_DEV_PM_OPS
and use pm_sleep_ptr for setting the driver's pm routines. We can now
remove the __maybe_unused qualifier in the suspend and resume functions.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Helge Deller <deller@gmx.de>
Warn about invalid var->left_margin or var->right_margin. Their values
are read from the device tree.
We store var->left_margin-3 and var->right_margin-1 in register
fields. These fields should be >= 0.
Fixes: 7e8549bcee ("imxfb: Fix margin settings")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Helge Deller <deller@gmx.de>
Unaligned exception handler is needed in configurations with hardware
support for unaligned access when the load/store exception handler is
enabled because such configurations would still raise an exception on
unaligned access through the instruction bus.
Fixes: f29cf77609 ("xtensa: add load/store exception handler")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
split_if_spec expects a NULL-pointer as an end marker for the argument
list, but tuntap_probe never supplied that terminating NULL. As a result
incorrectly formatted interface specification string may cause a crash
because of the random memory access. Fix that by adding NULL terminator
to the split_if_spec argument list.
Cc: stable@vger.kernel.org
Fixes: 7282bee787 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 8")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
iss_net_configure explicitly frees etherdev in all error return paths
except one where register_netdevice fails. In that remaining error
return path the etherdev is freed by the iss_net_pdev_release callback
triggered by the platform_device_unregister call. Add a comment stating
that.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
__journal_try_to_free_buffer() has only one caller and it's logic is
much simple now, so just remove it and open code in
jbd2_journal_try_to_free_buffers().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before removing checkpoint buffer from the t_checkpoint_list, we have to
check both BH_Dirty and BH_Lock bits together to distinguish buffers
have not been or were being written back. But __cp_buffer_busy() checks
them separately, it first check lock state and then check dirty, the
window between these two checks could be raced by writing back
procedure, which locks buffer and clears buffer dirty before I/O
completes. So it cannot guarantee checkpointing buffers been written
back to disk if some error happens later. Finally, it may clean
checkpoint transactions and lead to inconsistent filesystem.
jbd2_journal_forget() and __journal_try_to_free_buffer() also have the
same problem (journal_unmap_buffer() escape from this issue since it's
running under the buffer lock), so fix them through introducing a new
helper to try holding the buffer lock and remove really clean buffer.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217490
Cc: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Following process,
jbd2_journal_commit_transaction
// there are several dirty buffer heads in transaction->t_checkpoint_list
P1 wb_workfn
jbd2_log_do_checkpoint
if (buffer_locked(bh)) // false
__block_write_full_page
trylock_buffer(bh)
test_clear_buffer_dirty(bh)
if (!buffer_dirty(bh))
__jbd2_journal_remove_checkpoint(jh)
if (buffer_write_io_error(bh)) // false
>> bh IO error occurs <<
jbd2_cleanup_journal_tail
__jbd2_update_log_tail
jbd2_write_superblock
// The bh won't be replayed in next mount.
, which could corrupt the ext4 image, fetch a reproducer in [Link].
Since writeback process clears buffer dirty after locking buffer head,
we can fix it by try locking buffer and check dirtiness while buffer is
locked, the buffer head can be removed if it is neither dirty nor locked.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217490
Fixes: 470decc613 ("[PATCH] jbd2: initial copy of files from jbd")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
journal_clean_one_cp_list() and journal_shrink_one_cp_list() are almost
the same, so merge them into journal_shrink_one_cp_list(), remove the
nr_to_scan parameter, always scan and try to free the whole checkpoint
list.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since t_checkpoint_io_list was stop using in jbd2_log_do_checkpoint()
now, it's time to remove the whole t_checkpoint_io_list logic.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is a long-standing metadata corruption issue that happens from
time to time, but it's very difficult to reproduce and analyse, benefit
from the JBD2_CYCLE_RECORD option, we found out that the problem is the
checkpointing process miss to write out some buffers which are raced by
another do_get_write_access(). Looks below for detail.
jbd2_log_do_checkpoint() //transaction X
//buffer A is dirty and not belones to any transaction
__buffer_relink_io() //move it to the IO list
__flush_batch()
write_dirty_buffer()
do_get_write_access()
clear_buffer_dirty
__jbd2_journal_file_buffer()
//add buffer A to a new transaction Y
lock_buffer(bh)
//doesn't write out
__jbd2_journal_remove_checkpoint()
//finish checkpoint except buffer A
//filesystem corrupt if the new transaction Y isn't fully write out.
Due to the t_checkpoint_list walking loop in jbd2_log_do_checkpoint()
have already handles waiting for buffers under IO and re-added new
transaction to complete commit, and it also removing cleaned buffers,
this makes sure the list will eventually get empty. So it's fine to
leave buffers on the t_checkpoint_list while flushing out and completely
stop using the t_checkpoint_io_list.
Cc: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230606135928.434610-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When users register an event the name of the event and it's argument are
checked to ensure they match if the event already exists. Normally all
arguments are in the form of "type name", except for when the type
starts with "struct ". In those cases, the size of the struct is passed
in addition to the name, IE: "struct my_struct a 20" for an argument
that is of type "struct my_struct" with a field name of "a" and has the
size of 20 bytes.
The current code does not honor the above case properly when comparing
a match. This causes the event register to fail even when the same
string was used for events that contain a struct argument within them.
The example above "struct my_struct a 20" generates a match string of
"struct my_struct a" omitting the size field.
Add the struct size of the existing field when generating a comparison
string for a struct field to ensure proper match checking.
Link: https://lkml.kernel.org/r/20230629235049.581-2-beaub@linux.microsoft.com
Cc: stable@vger.kernel.org
Fixes: e6f89a1498 ("tracing/user_events: Ensure user provided strings are safely formatted")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The BPF standardization effort is actively underway with the IETF. As
described in the BPF Working Group (WG) charter in [0], there are a
number of proposed documents, some informational and some proposed
standards, that will be drafted as part of the standardization effort.
[0]: https://datatracker.ietf.org/wg/bpf/about/
Though the specific documents that will formally be standardized will
exist as Internet Drafts (I-D) and WG documents in the BPF WG
datatracker page, the source of truth from where those documents will be
generated will reside in the kernel documentation tree (originating in
the bpf-next tree).
Because these documents will be used to generate the I-D and WG
documents which will be standardized with the IETF, they are a bit
special as far as kernel-tree documentation goes:
- They will be dual licensed with LGPL-2.1 OR BSD-2-Clause
- IETF I-D and WG documents (the documents which will actually be
standardized) will be auto-generated from these documents.
In order to keep things clearly organized in the BPF documentation tree,
and to make it abundantly clear where standards-related documentation
needs to go, we should move standards-relevant documents into a separate
standardization/ subdirectory.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230710183027.15132-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use devm_* api to simplify code, this makes it unnecessary to explicitly
release resources.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705052346.39337-10-frank.li@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use devm_* api to simplify code, this makes it unnecessary to explicitly
release resources.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705052346.39337-8-frank.li@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705052346.39337-3-frank.li@vivo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ensure running fprobe_exit_handler() has finished before
calling rethook_free() in the unregister_fprobe() so that caller can free
the fprobe right after unregister_fprobe().
unregister_fprobe() ensured that all running fprobe_entry/exit_handler()
have finished by calling unregister_ftrace_function() which synchronizes
RCU. But commit 5f81018753 ("fprobe: Release rethook after the ftrace_ops
is unregistered") changed to call rethook_free() after
unregister_ftrace_function(). So call rethook_stop() to make rethook
disabled before unregister_ftrace_function() and ensure it again.
Here is the possible code flow that can call the exit handler after
unregister_fprobe().
------
CPU1 CPU2
call unregister_fprobe(fp)
...
__fprobe_handler()
rethook_hook() on probed function
unregister_ftrace_function()
return from probed function
rethook hooks
find rh->handler == fprobe_exit_handler
call fprobe_exit_handler()
rethook_free():
set rh->handler = NULL;
return from unreigster_fprobe;
call fp->exit_handler() <- (*)
------
(*) At this point, the exit handler is called after returning from
unregister_fprobe().
This fixes it as following;
------
CPU1 CPU2
call unregister_fprobe()
...
rethook_stop():
set rh->handler = NULL;
__fprobe_handler()
rethook_hook() on probed function
unregister_ftrace_function()
return from probed function
rethook hooks
find rh->handler == NULL
return from rethook
rethook_free()
return from unreigster_fprobe;
------
Link: https://lore.kernel.org/all/168873859949.156157.13039240432299335849.stgit@devnote2/
Fixes: 5f81018753 ("fprobe: Release rethook after the ftrace_ops is unregistered")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Quentin Monnet says:
====================
At runtime, bpftool may run its own BPF programs to get the pids of
processes referencing BPF programs, or to profile programs. The skeletons
for these programs rely on a vmlinux.h header and may fail to compile when
building bpftool on hosts running older kernels, where some structs or
enums are not defined. In this set, we address this issue by using local
definitions for struct perf_event, struct bpf_perf_link,
BPF_LINK_TYPE_PERF_EVENT (pids.bpf.c) and struct bpf_perf_event_value
(profiler.bpf.c).
This set contains patches 1 to 3 from Alexander Lobakin's series, "bpf:
random unpopular userspace fixes (32 bit et al)" (v2) [0], from April 2022.
An additional patch defines a local version of BPF_LINK_TYPE_PERF_EVENT in
bpftool's pids.bpf.c.
[0] https://lore.kernel.org/bpf/20220421003152.339542-1-alobakin@pm.me/
v2: Fixed description (CO-RE for container_of()) in patch 2.
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Michal Suchánek <msuchanek@suse.de>
Alexander Lobakin (3):
bpftool: use a local copy of perf_event to fix accessing ::bpf_cookie
bpftool: define a local bpf_perf_link to fix accessing its fields
bpftool: use a local bpf_perf_event_value to fix accessing its fields
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>