The volume-up key is connected to gpio6 on yoshino.
Fix button node ordering while at it.
Disable pm8998_resin, since it is now unused.
Tested on maple and lilac.
Fixes: 390883af89 ("arm64: dts: qcom: msm8998: Introduce support for Sony Yoshino platform")
Signed-off-by: Sebastian Raase <linux@sraa.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240315225237.1616550-1-linux@sraa.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add pinctrl configuration for gpio-keys. Without this,
camera button half-presses are not detected.
Tested on discovery and pioneer.
Fixes: e781633b60 ("arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform)")
Signed-off-by: Sebastian Raase <linux@sraa.de>
Link: https://lore.kernel.org/r/20240315085934.1511722-1-linux@sraa.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Drop two board compatibles that were used by the skales dtbTool to index
device tree blobs. It was required to boot those devices with the
original bootloader, however all users should have switched to the
lk2nd bootloader by now.
Suggested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240314-msm8916-drop-compats-v2-2-5a4b40f832d3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the ICE found on sc7280 and link it to the UFS node.
For reference:
[ 0.261424] qcom-ice 1d88000.crypto: Found QC Inline Crypto Engine (ICE) v3.2.0
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240313-sc7280-ice-v1-2-3fa089fb7a27@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
gpio16 will only be used for LCD support, as its NAND/LCDC data[8]
so its bit 9 of the parallel QPIC interface, and ONFI NAND is only 8
or 16-bit with only 8-bit one being supported in our case so that pin
is unused.
It should be dropped from the default NAND pinctrl configuration
as its unused and only needed for LCD.
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240313102713.1727458-1-frut3k7@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We don't use this device on Trogdor boards. If we did, it would be
enabled in the sc7180-trogdor.dtsi file. Let's disable this here so that
boards with t he sc7180 SoC can decide to enable or disable this device.
Cc: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Fixes: add74cad7c ("arm64: dts: qcom: sc7180: Add Data Capture and Compare(DCC) support node")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240229013503.483651-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We don't use this pmic pinctrl node on any Trogdor devices. The
AP_SUSPEND pin is here, but this pinctrl device isn't a supplier to
anything in the devicetrees that include this file. Disable this device
node in the DTS so that we don't waste time or memory on this device.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240229012828.438020-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Fixes: 494dec9b6f ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240402-fd-fix-schema-v3-3-817ea6ddf775@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property #stream-id-cells is legacy, it is not documented as valid
for the GPU. Drop it now.
Fixes: 494dec9b6f ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240402-fd-fix-schema-v3-2-817ea6ddf775@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The first part of the compatible of Type-C node misses ending quote,
thus we have one long compatible consisting of two compatible strings
leading to dtbs_check warnings:
sc7180-idp.dtb: usb-vbus-regulator@1100: compatible:0: 'qcom,pm6150-vbus-reg,\n qcom,pm8150b-vbus-reg' does not match '^[a-zA-Z0-9][a-zA-Z0-9,+\\-._/]+$'
sc7180-idp.dtb: /soc@0/spmi@c440000/pmic@0/usb-vbus-regulator@1100: failed to match any schema with compatible: ['qcom,pm6150-vbus-reg,\n qcom,pm8150b-vbus-reg']
Reported-by: Rob Herring <robh@kernel.org>
Fixes: f81c2f01ca ("arm64: dts: qcom: pm6150: define USB-C related blocks")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240328074544.5076-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Fix logic that is supposed to prevent placement of the kernel image
below LOAD_PHYSICAL_ADDR
- Use the firmware stack in the EFI stub when running in mixed mode
- Clear BSS only once when using mixed mode
- Check efi.get_variable() function pointer for NULL before trying to
call it
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZgCRgwAKCRAwbglWLn0t
XHozAP9jLdeGs1ReYZAn+W0QtW/SJHJznoPiHcktdNKG4rNX3QD9G3URu0f4jKCG
yvjw8qHM1pC2cihXXjABjf7gL7g6LAE=
=cNP7
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Fix logic that is supposed to prevent placement of the kernel image
below LOAD_PHYSICAL_ADDR
- Use the firmware stack in the EFI stub when running in mixed mode
- Clear BSS only once when using mixed mode
- Check efi.get_variable() function pointer for NULL before trying to
call it
* tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: fix panic in kdump kernel
x86/efistub: Don't clear BSS twice in mixed mode
x86/efistub: Call mixed mode boot services on the firmware's stack
efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address
- Ensure that the encryption mask at boot is properly propagated on
5-level page tables, otherwise the PGD entry is incorrectly set to
non-encrypted, which causes system crashes during boot.
- Undo the deferred 5-level page table setup as it cannot work with
memory encryption enabled.
- Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
to the default value but the cached variable is not, so subsequent
comparisons might yield the wrong result and as a consequence the
result prevents updating the MSR.
- Register the local APIC address only once in the MPPARSE enumeration to
prevent triggering the related WARN_ONs() in the APIC and topology code.
- Handle the case where no APIC is found gracefully by registering a fake
APIC in the topology code. That makes all related topology functions
work correctly and does not affect the actual APIC driver code at all.
- Don't evaluate logical IDs during early boot as the local APIC IDs are
not yet enumerated and the invoked function returns an error
code. Nothing requires the logical IDs before the final CPUID
enumeration takes place, which happens after the enumeration.
- Cure the fallout of the per CPU rework on UP which misplaced the
copying of boot_cpu_data to per CPU data so that the final update to
boot_cpu_data got lost which caused inconsistent state and boot
crashes.
- Use copy_from_kernel_nofault() in the kprobes setup as there is no
guarantee that the address can be safely accessed.
- Reorder struct members in struct saved_context to work around another
kmemleak false positive
- Remove the buggy code which tries to update the E820 kexec table for
setup_data as that is never passed to the kexec kernel.
- Update the resource control documentation to use the proper units.
- Fix a Kconfig warning observed with tinyconfig
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmYAUH4THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoXzREAC/HVB7yzUEbjbh7dyYRBEgFU19bcyC
JKf9HVmEHj03HstUxF1dxguUhwfHVPNTWpjmy/fRwxqgM9JG+QpV6T4DIldWqchv
AUYFrQBMvql8hTKxRa/Ny75d2IqKPgEEGUuyU+ZHAzEEPwhKrbtVRDPuEiMxpd5I
9B1Pya4EzUyOv1UhPIg7PRoya1msimBZ0mCw4In6ri6xVRm1uC3Ln4LZPylxn96l
f77rz5UToUw0gfgDaezF0z4ml1phGEdSX0Z3hhD0PX12wbJGEdvPzL0qTgEq72Ad
AeLmHx4K8z2zoHMHK7iTEwjoplQxGsWLoezh22cVEEJX0dtzHz6R0ftBCa6uzATJ
C8FF1oDDHAhTL94YmVSTZHr6AdJ6LwgYHO3zXZUhxuB7PNXAT4FmT0zgU1fU3sC1
U/1mIFdgOEUOlGll2Ra5uTUKc0K/dc+yC9dcbz37Kwj3KlfqTN+5BWocjySkHomr
gcv37aU1TJGSC/D1lYWTDWGKVbbP5lk+KIGICT5SBKn0METa/wOo8dE6+T1kIwvS
t2QTlJdzilLcWGVQ8GiNjjRxFtRKY5i9Shi4K+wUvCee4/XJzRrpxrCEY8w/qceV
hc3kfUIon3TCv8+rnlSuNRZBvmFhXMYwMt0gQv4YywB+aOITKTzbGUOazLtRNKAH
lFCnBRS55AB8mg==
=WyQ2
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Ensure that the encryption mask at boot is properly propagated on
5-level page tables, otherwise the PGD entry is incorrectly set to
non-encrypted, which causes system crashes during boot.
- Undo the deferred 5-level page table setup as it cannot work with
memory encryption enabled.
- Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
to the default value but the cached variable is not, so subsequent
comparisons might yield the wrong result and as a consequence the
result prevents updating the MSR.
- Register the local APIC address only once in the MPPARSE enumeration
to prevent triggering the related WARN_ONs() in the APIC and topology
code.
- Handle the case where no APIC is found gracefully by registering a
fake APIC in the topology code. That makes all related topology
functions work correctly and does not affect the actual APIC driver
code at all.
- Don't evaluate logical IDs during early boot as the local APIC IDs
are not yet enumerated and the invoked function returns an error
code. Nothing requires the logical IDs before the final CPUID
enumeration takes place, which happens after the enumeration.
- Cure the fallout of the per CPU rework on UP which misplaced the
copying of boot_cpu_data to per CPU data so that the final update to
boot_cpu_data got lost which caused inconsistent state and boot
crashes.
- Use copy_from_kernel_nofault() in the kprobes setup as there is no
guarantee that the address can be safely accessed.
- Reorder struct members in struct saved_context to work around another
kmemleak false positive
- Remove the buggy code which tries to update the E820 kexec table for
setup_data as that is never passed to the kexec kernel.
- Update the resource control documentation to use the proper units.
- Fix a Kconfig warning observed with tinyconfig
* tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Move 5-level paging global variable assignments back
x86/boot/64: Apply encryption mask to 5-level pagetable update
x86/cpu: Add model number for another Intel Arrow Lake mobile processor
x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD
Documentation/x86: Document that resctrl bandwidth control units are MiB
x86/mpparse: Register APIC address only once
x86/topology: Handle the !APIC case gracefully
x86/topology: Don't evaluate logical IDs during early boot
x86/cpu: Ensure that CPU info updates are propagated on UP
kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address
x86/pm: Work around false positive kmemleak report in msr_build_context()
x86/kexec: Do not update E820 kexec table for setup_data
x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'
Normally, the EFI stub calls into the EFI boot services using the stack
that was live when the stub was entered. According to the UEFI spec,
this stack needs to be at least 128k in size - this might seem large but
all asynchronous processing and event handling in EFI runs from the same
stack and so quite a lot of space may be used in practice.
In mixed mode, the situation is a bit different: the bootloader calls
the 32-bit EFI stub entry point, which calls the decompressor's 32-bit
entry point, where the boot stack is set up, using a fixed allocation
of 16k. This stack is still in use when the EFI stub is started in
64-bit mode, and so all calls back into the EFI firmware will be using
the decompressor's limited boot stack.
Due to the placement of the boot stack right after the boot heap, any
stack overruns have gone unnoticed. However, commit
5c4feadb00 ("x86/decompressor: Move global symbol references to C code")
moved the definition of the boot heap into C code, and now the boot
stack is placed right at the base of BSS, where any overruns will
corrupt the end of the .data section.
While it would be possible to work around this by increasing the size of
the boot stack, doing so would affect all x86 systems, and mixed mode
systems are a tiny (and shrinking) fraction of the x86 installed base.
So instead, record the firmware stack pointer value when entering from
the 32-bit firmware, and switch to this stack every time a EFI boot
service call is made.
Cc: <stable@kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit 63bed96604 ("x86/startup_64: Defer assignment of 5-level paging
global variables") moved assignment of 5-level global variables to later
in the boot in order to avoid having to use RIP relative addressing in
order to set them. However, when running with 5-level paging and SME
active (mem_encrypt=on), the variables are needed as part of the page
table setup needed to encrypt the kernel (using pgd_none(), p4d_offset(),
etc.). Since the variables haven't been set, the page table manipulation
is done as if 4-level paging is active, causing the system to crash on
boot.
While only a subset of the assignments that were moved need to be set
early, move all of the assignments back into check_la57_support() so that
these assignments aren't spread between two locations. Instead of just
reverting the fix, this uses the new RIP_REL_REF() macro when assigning
the variables.
Fixes: 63bed96604 ("x86/startup_64: Defer assignment of 5-level paging global variables")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/2ca419f4d0de719926fd82353f6751f717590a86.1711122067.git.thomas.lendacky@amd.com
When running with 5-level page tables, the kernel mapping PGD entry is
updated to point to the P4D table. The assignment uses _PAGE_TABLE_NOENC,
which, when SME is active (mem_encrypt=on), results in a page table
entry without the encryption mask set, causing the system to crash on
boot.
Change the assignment to use _PAGE_TABLE instead of _PAGE_TABLE_NOENC so
that the encryption mask is set for the PGD entry.
Fixes: 533568e06b ("x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[]")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/8f20345cda7dbba2cf748b286e1bc00816fe649a.1711122067.git.thomas.lendacky@amd.com
Commit 672365477a ("x86/fpu: Update XFD state where required") and
commit 8bf26758ca ("x86/fpu: Add XFD state to fpstate") introduced a
per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in
order to avoid unnecessary writes to the MSR.
On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which
wipes out any stale state. But the per CPU cached xfd value is not
reset, which brings them out of sync.
As a consequence a subsequent xfd_update_state() might fail to update
the MSR which in turn can result in XRSTOR raising a #NM in kernel
space, which crashes the kernel.
To fix this, introduce xfd_set_state() to write xfd_state together
with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD.
Fixes: 672365477a ("x86/fpu: Update XFD state where required")
Signed-off-by: Adamos Ttofari <attofari@amazon.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240322230439.456571-1-chang.seok.bae@intel.com
Closes: https://lore.kernel.org/lkml/20230511152818.13839-1-attofari@amazon.de
- Handle errors in mark_rodata_ro() and mark_initmem_nx().
- Make struct crash_mem available without CONFIG_CRASH_DUMP.
Thanks to: Christophe Leroy, Hari Bathini.
-----BEGIN PGP SIGNATURE-----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=edty
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Handle errors in mark_rodata_ro() and mark_initmem_nx()
- Make struct crash_mem available without CONFIG_CRASH_DUMP
Thanks to Christophe Leroy and Hari Bathini.
* tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency
powerpc/kexec: split CONFIG_KEXEC_FILE and CONFIG_CRASH_DUMP
kexec/kdump: make struct crash_mem available without CONFIG_CRASH_DUMP
powerpc: Handle error in mark_rodata_ro() and mark_initmem_nx()
- remove a misuse of kernel-doc comment
- use "Call trace:" for backtraces like other architectures
- implement copy_from_kernel_nofault_allowed() to fix a LKDTM test
- add a "cut here" line for prefetch aborts
- remove unnecessary Kconfing entry for FRAME_POINTER
- remove iwmmxy support for PJ4/PJ4B cores
- use bitfield helpers in ptrace to improve readabililty
- check if folio is reserved before flushing
-----BEGIN PGP SIGNATURE-----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=f4r2
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- remove a misuse of kernel-doc comment
- use "Call trace:" for backtraces like other architectures
- implement copy_from_kernel_nofault_allowed() to fix a LKDTM test
- add a "cut here" line for prefetch aborts
- remove unnecessary Kconfing entry for FRAME_POINTER
- remove iwmmxy support for PJ4/PJ4B cores
- use bitfield helpers in ptrace to improve readabililty
- check if folio is reserved before flushing
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses
ARM: 9354/1: ptrace: Use bitfield helpers
ARM: 9352/1: iwmmxt: Remove support for PJ4/PJ4B cores
ARM: 9353/1: remove unneeded entry for CONFIG_FRAME_POINTER
ARM: 9351/1: fault: Add "cut here" line for prefetch aborts
ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()
ARM: 9349/1: unwind: Add missing "Call trace:" line
ARM: 9334/1: mm: init: remove misuse of kernel-doc comment
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
-----BEGIN PGP SIGNATURE-----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=1LW2
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more hardening updates from Kees Cook:
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
* tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/bugs: Improve warning message for compilers without counted_by support
overflow: Change DEFINE_FLEX to take __counted_by member
Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST"
arch/Kconfig: eliminate needless UTF-8 character in Kconfig help
ubsan: Disable signed integer overflow sanitizer on GCC < 8
The APIC address is registered twice. First during the early detection and
afterwards when actually scanning the table for APIC IDs. The APIC and
topology core warn about the second attempt.
Restrict it to the early detection call.
Fixes: 81287ad65d ("x86/apic: Sanitize APIC address setup")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.297774848@linutronix.de
If there is no local APIC enumerated and registered then the topology
bitmaps are empty. Therefore, topology_init_possible_cpus() will die with
a division by zero exception.
Prevent this by registering a fake APIC id to populate the topology
bitmap. This also allows to use all topology query interfaces
unconditionally. It does not affect the actual APIC code because either
the local APIC address was not registered or no local APIC could be
detected.
Fixes: f1f758a805 ("x86/topology: Add a mechanism to track topology via APIC IDs")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.242709302@linutronix.de
The local APICs have not yet been enumerated so the logical ID evaluation
from the topology bitmaps does not work and would return an error code.
Skip the evaluation during the early boot CPUID evaluation and only apply
it on the final run.
Fixes: 380414be78 ("x86/cpu/topology: Use topology logical mapping mechanism")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.186943142@linutronix.de
The boot sequence evaluates CPUID information twice:
1) During early boot
2) When finalizing the early setup right before
mitigations are selected and alternatives are patched.
In both cases the evaluation is stored in boot_cpu_data, but on UP the
copying of boot_cpu_data to the per CPU info of the boot CPU happens
between #1 and #2. So any update which happens in #2 is never propagated to
the per CPU info instance.
Consolidate the whole logic and copy boot_cpu_data right before applying
alternatives as that's the point where boot_cpu_data is in it's final
state and not supposed to change anymore.
This also removes the voodoo mb() from smp_prepare_cpus_common() which
had absolutely no purpose.
Fixes: 71eb4893cf ("x86/percpu: Cure per CPU madness on UP")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.127642785@linutronix.de
* Support for various vector-accelerated crypto routines.
* Hibernation is now enabled for portable kernel builds.
* mmap_rnd_bits_max is larger on systems with larger VAs.
* Support for fast GUP.
* Support for membarrier-based instruction cache synchronization.
* Support for the Andes hart-level interrupt controller and PMU.
* Some cleanups around unaligned access speed probing and Kconfig
settings.
* Support for ACPI LPI and CPPC.
* Various cleanus related to barriers.
* A handful of fixes.
-----BEGIN PGP SIGNATURE-----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=3dL5
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
1, Add objtool support for LoongArch;
2, Add ORC stack unwinder support for LoongArch;
3, Add kernel livepatching support for LoongArch;
4, Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig;
5, Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig;
6, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=lSkY
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add objtool support for LoongArch
- Add ORC stack unwinder support for LoongArch
- Add kernel livepatching support for LoongArch
- Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
- Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
- Some bug fixes and other small changes
* tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch/crypto: Clean up useless assignment operations
LoongArch: Define the __io_aw() hook as mmiowb()
LoongArch: Remove superfluous flush_dcache_page() definition
LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h
LoongArch: Change __my_cpu_offset definition to avoid mis-optimization
LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
LoongArch: Add kernel livepatching support
LoongArch: Add ORC stack unwinder support
objtool: Check local label in read_unwind_hints()
objtool: Check local label in add_dead_ends()
objtool/LoongArch: Enable orc to be built
objtool/x86: Separate arch-specific and generic parts
objtool/LoongArch: Implement instruction decoder
objtool/LoongArch: Enable objtool to be built
Read from an unsafe address with copy_from_kernel_nofault() in
arch_adjust_kprobe_addr() because this function is used before checking
the address is in text or not. Syzcaller bot found a bug and reported
the case if user specifies inaccessible data area,
arch_adjust_kprobe_addr() will cause a kernel panic.
[ mingo: Clarified the comment. ]
Fixes: cc66bb9145 ("x86/ibt,kprobes: Cure sym+0 equals fentry woes")
Reported-by: Qiang Zhang <zzqq0103.hey@gmail.com>
Tested-by: Jinghao Jia <jinghao7@illinois.edu>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/171042945004.154897.2221804961882915806.stgit@devnote2
Since:
7ee18d6779 ("x86/power: Make restore_processor_context() sane")
kmemleak reports this issue:
unreferenced object 0xf68241e0 (size 32):
comm "swapper/0", pid 1, jiffies 4294668610 (age 68.432s)
hex dump (first 32 bytes):
00 cc cc cc 29 10 01 c0 00 00 00 00 00 00 00 00 ....)...........
00 42 82 f6 cc cc cc cc cc cc cc cc cc cc cc cc .B..............
backtrace:
[<461c1d50>] __kmem_cache_alloc_node+0x106/0x260
[<ea65e13b>] __kmalloc+0x54/0x160
[<c3858cd2>] msr_build_context.constprop.0+0x35/0x100
[<46635aff>] pm_check_save_msr+0x63/0x80
[<6b6bb938>] do_one_initcall+0x41/0x1f0
[<3f3add60>] kernel_init_freeable+0x199/0x1e8
[<3b538fde>] kernel_init+0x1a/0x110
[<938ae2b2>] ret_from_fork+0x1c/0x28
Which is a false positive.
Reproducer:
- Run rsync of whole kernel tree (multiple times if needed).
- start a kmemleak scan
- Note this is just an example: a lot of our internal tests hit these.
The root cause is similar to the fix in:
b0b592cf08 x86/pm: Fix false positive kmemleak report in msr_build_context()
ie. the alignment within the packed struct saved_context
which has everything unaligned as there is only "u16 gs;" at start of
struct where in the past there were four u16 there thus aligning
everything afterwards. The issue is with the fact that Kmemleak only
searches for pointers that are aligned (see how pointers are scanned in
kmemleak.c) so when the struct members are not aligned it doesn't see
them.
Testing:
We run a lot of tests with our CI, and after applying this fix we do not
see any kmemleak issues any more whilst without it we see hundreds of
the above report. From a single, simple test run consisting of 416 individual test
cases on kernel 5.10 x86 with kmemleak enabled we got 20 failures due to this,
which is quite a lot. With this fix applied we get zero kmemleak related failures.
Fixes: 7ee18d6779 ("x86/power: Make restore_processor_context() sane")
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240314142656.17699-1-anton@tuxera.com
crashkernel reservation failed on a Thinkpad t440s laptop recently.
Actually the memblock reservation succeeded, but later insert_resource()
failed.
Test steps:
kexec load -> /* make sure add crashkernel param eg. crashkernel=160M */
kexec reboot ->
dmesg|grep "crashkernel reserved";
crashkernel memory range like below reserved successfully:
0x00000000d0000000 - 0x00000000da000000
But no such "Crash kernel" region in /proc/iomem
The background story:
Currently the E820 code reserves setup_data regions for both the current
kernel and the kexec kernel, and it inserts them into the resources list.
Before the kexec kernel reboots nobody passes the old setup_data, and
kexec only passes fresh SETUP_EFI/SETUP_IMA/SETUP_RNG_SEED if needed.
Thus the old setup data memory is not used at all.
Due to old kernel updates the kexec e820 table as well so kexec kernel
sees them as E820_TYPE_RESERVED_KERN regions, and later the old setup_data
regions are inserted into resources list in the kexec kernel by
e820__reserve_resources().
Note, due to no setup_data is passed in for those old regions they are not
early reserved (by function early_reserve_memory), and the crashkernel
memblock reservation will just treat them as usable memory and it could
reserve the crashkernel region which overlaps with the old setup_data
regions. And just like the bug I noticed here, kdump insert_resource
failed because e820__reserve_resources has added the overlapped chunks
in /proc/iomem already.
Finally, looking at the code, the old setup_data regions are not used
at all as no setup_data is passed in by the kexec boot loader. Although
something like SETUP_PCI etc could be needed, kexec should pass
the info as new setup_data so that kexec kernel can take care of them.
This should be taken care of in other separate patches if needed.
Thus drop the useless buggy code here.
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Eric DeVolder <eric.devolder@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/Zf0T3HCG-790K-pZ@darkstar.users.ipa.redhat.com
- Re-instate the CPUMASK_OFFSTACK option for arm64 when NR_CPUS > 256.
The bug that led to the initial revert was the cpufreq-dt code not
using zalloc_cpumask_var().
- Make the STARFIVE_STARLINK_PMU config option depend on 64BIT to
prevent compile-test failures on 32-bit architectures due to missing
writeq().
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmX8y64ACgkQa9axLQDI
XvEWog//UREjgTamUst9BtsJzTTUAL6mb1lPOQvQ/FIYtVg+MyaReLGfpztyZGWR
HfSS86J8f2Ek0RoAV8E+3lMoryepEXtRVl1ZnbBRxseF+ixjO+cQqc4KtOTB+gG2
QwnbLID+kKLJ67V7nUuAZr+L/Wo21xBfOP5RQzevJDUQ2A4zRwz5T0HJyQ1NVNrn
HnTDcbq5wm2/L0t2ElmR5UWyBIfcJblajgpk5pM2xKCjemI/2mcPOk3Chsg+ZIEX
lhbkHQ7iiC9fcznDzo/vxTVDPEMiwaFu820PduQziyF7h5HqzH+o02Ubpsqj+EsQ
WDJretzSq/x4/Tr02XrU02TYl0r6fokhGjd5w+tS+xhj40EHLURpb0OVRDVk8FHu
3F2h9YcMMKTccF6XUz+2wRTg+tPt3u2C7It0vnp/E4ukQ4x5Z48TYlr+pvSEeWNA
xIeghscAZt8jXq9N0Rwn3Wpp+GQDJgvTTHsLFHl1xHhARP+yd9Bq3IHPxvQqfkHx
oIs08dE3SdXEzWBUQ3jymT87RgD9cvili2GT+SFqNZTgpD4glaQbDC+iTngqvUcP
mhhMygcPRXESLVrjUHr6zhS9Tm5jrfi96MJwyAV8+43E1bNRTZVdcbKHemitDxCw
zMSJ4soWy17nwNOBcEaDKT+vkq+qKgVP6D9qiCc6dKv6WZAZa1Q=
=XMj7
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Re-instate the CPUMASK_OFFSTACK option for arm64 when NR_CPUS > 256.
The bug that led to the initial revert was the cpufreq-dt code not
using zalloc_cpumask_var().
- Make the STARFIVE_STARLINK_PMU config option depend on 64BIT to
prevent compile-test failures on 32-bit architectures due to missing
writeq().
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf: starfive: fix 64-bit only COMPILE_TEST condition
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
-----BEGIN PGP SIGNATURE-----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=tFdl
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
* tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits)
kconfig: tests: test dependency after shuffling choices
kconfig: tests: add a test for randconfig with dependent choices
kconfig: tests: support KCONFIG_SEED for the randconfig runner
kbuild: rpm-pkg: add dtb files in kernel rpm
kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig()
kconfig: check prompt for choice while parsing
kconfig: lxdialog: remove unused dialog colors
kconfig: lxdialog: fix button color for blackbg theme
modpost: fix null pointer dereference
kbuild: remove GCC's default -Wpacked-bitfield-compat flag
kbuild: unexport abs_srctree and abs_objtree
kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
kconfig: remove named choice support
kconfig: use linked list in get_symbol_str() to iterate over menus
kconfig: link menus to a symbol
kbuild: fix inconsistent indentation in top Makefile
kbuild: Use -fmin-function-alignment when available
alpha: merge two entries for CONFIG_ALPHA_GAMMA
alpha: merge two entries for CONFIG_ALPHA_EV4
kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj)
...
Here is the big set of char/misc and a number of other driver subsystem
updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning with some older versions of gcc for a
speakup driver, fix for that will come in a few days when I catch up
with my pending patch queues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwuLg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynKVACgjvR1cD8NYk9PcGWc9ZaXAZ6zSnwAn260kMoe
lLFtwszo7m0N6ZULBWBd
=y3yz
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and a number of other driver
subsystem updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning for the speakup driver"
The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.
Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/
* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
binder: remove redundant variable page_addr
uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
uio_pruss: UIO_MEM_DMA_COHERENT conversion
cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
uio: introduce UIO_MEM_DMA_COHERENT type
cdx: add MSI support for CDX bus
pps: use cflags-y instead of EXTRA_CFLAGS
speakup: Add /dev/synthu device
speakup: Fix 8bit characters from direct synth
parport: sunbpp: Convert to platform remove callback returning void
parport: amiga: Convert to platform remove callback returning void
char: xillybus: Convert to platform remove callback returning void
vmw_balloon: change maintainership
MAINTAINERS: change the maintainer for hpilo driver
char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
hpet: remove hpets::hp_clocksource
platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
char: xilinx_hwicap: drop casting to void in dev_set_drvdata
greybus: move is_gb_* functions out of greybus.h
greybus: Remove usage of the deprecated ida_simple_xx() API
...
Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwqow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNegCffxTbsnbMGjWhVrQ326IJx/DFvNMAoI9csigv
m+G3RzefzZLRx8nAma0c
=GMfc
-----END PGP SIGNATURE-----
Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
dt-bindings: serial: stm32: add power-domains property
serial: 8250_dw: Replace ACPI device check by a quirk
serial: Lock console when calling into driver before registration
serial: 8250_uniphier: Switch to use uart_read_port_properties()
serial: 8250_tegra: Switch to use uart_read_port_properties()
serial: 8250_pxa: Switch to use uart_read_port_properties()
serial: 8250_omap: Switch to use uart_read_port_properties()
serial: 8250_of: Switch to use uart_read_port_properties()
serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
serial: 8250_ingenic: Switch to use uart_read_port_properties()
serial: 8250_dw: Switch to use uart_read_port_properties()
serial: 8250_bcm7271: Switch to use uart_read_port_properties()
serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
serial: port: Introduce a common helper to read properties
serial: core: Add UPIO_UNKNOWN constant for unknown port type
serial: core: Move struct uart_port::quirks closer to possible values
serial: sh-sci: Call sci_serial_{in,out}() directly
serial: core: only stop transmit when HW fifo is empty
serial: pch: Use uart_prepare_sysrq_char().
...
Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of
tiny changes and forward progress to support new hardware and better
support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwpzA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymS9QCdEuF6KJFLOrDrGS4NbZNSUPIVF6oAn350r4NX
CMZah37Dfr1VDCOOV4gQ
=HACL
-----END PGP SIGNATURE-----
Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
- sh: hd64461: Make setup_hd64461() static
- sh: intc: Make intc_subsys const
- sh: dma-sysfs: Make dma_subsys const
-----BEGIN PGP SIGNATURE-----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=u8rR
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Two patches by Ricardo B. Marliere make two instances of struct
bus_type in the interrupt controller driver and the DMA sysfs
interface const since the driver core in the kernel is now able to
handle that.
A third patch by Artur Rojek enforces internal linkage for the
function setup_hd64461() in order to fix the build of hp6xx_defconfig
with -Werror=missing-prototypes"
* tag 'sh-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: hd64461: Make setup_hd64461() static
sh: intc: Make intc_subsys const
sh: dma-sysfs: Make dma_subsys const
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmX7sYwTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXiMeCADAUfjuJyU1jrQxjXv0U9u0tng77FAt
iT3+YFLR2Y4l8KRjD6Tpyk4fl/VN5VbJv1zPtSdNaViyri15gJjV7iMPujkx/pqO
pxNfbOVZG7VeKMrudJzP2BHN2mAf8N0qyuVTFyMwLO5EtJrY44t4PtkA1r5cO6Pc
eyoJWBofxH7XjkhOAMk4I3LXZMrq+hmtJ31G3eek6v/VjD1PtxU4f6/gJiqK9fz6
ssvSfII0aCIKman5sYlhl11TO8omz/68L4db25ZLDSCdOrE5ZlQykmUshluuoesw
eTUiuUZEh1O42Lsq7/hdUh+dSVGdTLHa9NKRQyWcruZiZ1idoZIA74ZW
=4vOw
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20240320' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Use Hyper-V entropy to seed guest random number generator (Michael
Kelley)
- Convert to platform remove callback returning void for vmbus (Uwe
Kleine-König)
- Introduce hv_get_hypervisor_version function (Nuno Das Neves)
- Rename some HV_REGISTER_* defines for consistency (Nuno Das Neves)
- Change prefix of generic HV_REGISTER_* MSRs to HV_MSR_* (Nuno Das
Neves)
- Cosmetic changes for hv_spinlock.c (Purna Pavan Chandra Aekkaladevi)
- Use per cpu initial stack for vtl context (Saurabh Sengar)
* tag 'hyperv-next-signed-20240320' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Use Hyper-V entropy to seed guest random number generator
x86/hyperv: Cosmetic changes for hv_spinlock.c
hyperv-tlfs: Rename some HV_REGISTER_* defines for consistency
hv: vmbus: Convert to platform remove callback returning void
mshyperv: Introduce hv_get_hypervisor_version function
x86/hyperv: Use per cpu initial stack for vtl context
hyperv-tlfs: Change prefix of generic HV_REGISTER_* MSRs to HV_MSR_*
Enforce internal linkage for setup_hd64461().
This fixes the following error:
arch/sh/cchips/hd6446x/hd64461.c:75:12: error: no previous prototype for 'setup_hd64461' [-Werror=missing-prototypes]
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20240211193451.106795-1-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Kconfig emits a warning for the following command:
$ make ARCH=x86_64 tinyconfig
...
.config:1380:warning: override: UNWINDER_GUESS changes choice state
When X86_64=y, the unwinder is exclusively selected from the following
three options:
- UNWINDER_ORC
- UNWINDER_FRAME_POINTER
- UNWINDER_GUESS
However, arch/x86/configs/tiny.config only specifies the values of the
last two. UNWINDER_ORC must be explicitly disabled.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240320154313.612342-1-masahiroy@kernel.org
The current syscall wrapper macros break 64-bit arguments on
rv32 because they only guarantee the first N input registers are
passed to syscalls that accept N arguments. According to the
calling convention, values twice the word size reside in register
pairs and as a result, syscall arguments don't always have a
direct register mapping on rv32.
Instead of using `__MAP(x,__SC_LONG,__VA_ARGS__)` to declare the
type of the `__se(_compat)_sys_*` functions on rv32, change the
function declarations to accept `ulong` arguments and alias them
to the actual syscall implementations, similarly to the existing
macros in include/linux/syscalls.h. This matches previous
behavior and ensures registers are passed to syscalls as-is, no
matter which argument types they expect.
Fixes: 08d0ce30e0 ("riscv: Implement syscall wrappers")
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20240311193143.2981310-2-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add an implementation of cts(cbc(aes)) accelerated using the Zvkned
RISC-V vector crypto extension. This is mainly useful for fscrypt,
where cts(cbc(aes)) is the "default" filenames encryption algorithm. In
that use case, typically most messages are short and are block-aligned.
The CBC-CTS variant implemented is CS3; this is the variant Linux uses.
To perform well on short messages, the new implementation processes the
full message in one call to the assembly function if the data is
contiguous. Otherwise it falls back to CBC operations followed by CTS
at the end. For decryption, to further improve performance on short
messages, especially block-aligned messages, the CBC-CTS assembly
function parallelizes the AES decryption of all full blocks. This
improves on the arm64 implementation of cts(cbc(aes)), which always
splits the CBC part(s) from the CTS part, doing the AES decryptions for
the last two blocks serially and usually loading the round keys twice.
Tested in QEMU with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240213055442.35954-1-ebiggers@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since CBC decryption is parallelizable, make the RISC-V implementation
of AES-CBC decryption process multiple blocks at a time, instead of
processing the blocks one by one. This should improve performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240208060851.154129-1-ebiggers@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We used to emit a flush_icache_all() whenever a dirty executable
mapping is set in the page table but we can instead call
flush_icache_mm() which will only send IPIs to cores that currently run
this mm and add a deferred icache flush to the others.
The number of calls to sbi_remote_fence_i() (tested without IPI
support):
With a simple buildroot rootfs:
* Before: ~5k
* After : 4 (!)
Tested on HW, the boot to login is ~4.5% faster.
With an ubuntu rootfs:
* Before: ~24k
* After : ~13k
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240202124711.256146-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
