1. remove unnecessary ac check:
We always go to out tag before ac is successfully allocated, then we can
move out tag after free of ac and remove NULL check of ac.
2. remove unnecessary *errp check:
We always go to errout tag if *errp is non-zero, then we can move errout
tag into error handle if *errp is non-zero.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-12-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
e4b->bd_buddy_page is only set if we initialize ext4_buddy successfully. So
e4b->bd_buddy_page is always NULL in error handle branch. Just remove the
dead check.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-11-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we alloc array of buffer_head failed, there is no resource need to be
freed and we can simpily return error.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-10-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return value static function ext4_mb_try_best_found and
ext4_mb_free_metadata is not used. Just remove unused return value.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext4_mb_mark_diskspace_used fails in ext4_mb_new_blocks, we may
discard pa already in list. Protect pa with pa_lock to avoid race.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As we don't correct pa_lstart here, so there is no need to subtract
pa_lstart with consumed len.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We will add pa_free to s_mb_preallocated when new ext4_prealloc_space is
created. In ext4_mb_new_inode_pa, we will call ext4_mb_use_inode_pa
before adding pa_free to s_mb_preallocated. However, ext4_mb_use_inode_pa
will consume pa_free for block allocation which triggerred the creation
of ext4_prealloc_space. Add pa_free to s_mb_preallocated before
ext4_mb_use_inode_pa to correct calculation of s_mb_preallocated.
There is no such problem in ext4_mb_new_group_pa as pa_free of group pa
is consumed in ext4_mb_release_context instead of ext4_mb_use_group_pa.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We always get ext4_group_desc with group + 1 and ext4_group_info with
group to check if we need do initialize ext4_group_info for the group.
Just get ext4_group_desc with group for ext4_group_info initialization
check.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If EXT4_MB_HINT_GOAL_ONLY is set, ext4_mb_regular_allocator will only
allocate blocks from ext4_mb_find_by_goal. Allow to find by goal in
ext4_mb_find_by_goal if EXT4_MB_HINT_GOAL_ONLY is set or allocation
with EXT4_MB_HINT_GOAL_ONLY set will always fail.
EXT4_MB_HINT_GOAL_ONLY is not used at all, so the problem is not
found for now.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We need to set ac_g_ex to notify the goal start used in
ext4_mb_find_by_goal. Set ac_g_ex instead of ac_f_ex in
ext4_mb_normalize_request.
Besides we should assure goal start is in range [first_data_block,
blocks_count) as ext4_mb_initialize_context does.
[ Added a check to make sure size is less than ar->pright; otherwise
we could end up passing an underflowed value of ar->pright - size to
ext4_get_group_no_and_offset(), which will trigger a BUG_ON later on.
- TYT ]
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Functions for searching module kallsyms should have non-empty
definitions only if CONFIG_MODULES=y and CONFIG_KALLSYMS=y. Until now,
only CONFIG_MODULES check was used for many of these, which may have
caused complilation errors on some configs.
This patch moves all relevant functions under the correct configs.
Fixes: bd5314f8dd ("kallsyms, bpf: Move find_kallsyms_symbol_value out of internal header")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303181535.RFDCnz3E-lkp@intel.com/
Link: https://lore.kernel.org/r/20230330102001.2183693-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Quentin Monnet says:
====================
This set contains some improvements for bpftool's "visual" program dump
option, which produces the control flow graph in a DOT format. The main
objective is to add support for inline annotations on such graphs, so that
we can have the C source code for the program showing up alongside the
instructions, when available. The last commits also make it possible to
display the line numbers or the bare opcodes in the graph, as supported by
regular program dumps.
v3:
- Fixed formatting of DOT graph: escape spaces, and remove indent that
would cause some unwanted spaces to show up in the resulting graph.
- Don't print line information if the record is empty.
- Add '<' and ' ' to the list of escaped characters for generting the
DOT graph.
- Truncate long file paths, use shorter field names ("line", "col") for
code location information in the graph, add missing separator space.
- Add a commit to return an error if JSON output and CFG are both
required.
- Add a drive-by, clean up commit for bash completion (avoid unnecessary
calls to _bpftool_once_attr()).
v2: Replace fputc(..., stdout) with putchar(...) in dotlabel_puts().
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In bpftool's bash completion file, function _bpftool_once_attr() is able
to process multiple arguments. There are a few locations where this
function is called multiple times in a row, each time for a single
argument; let's pass all arguments instead to minimize the number of
function calls required for the completion.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-8-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for displaying opcodes or/and file references (filepath,
line and column numbers) when dumping the control flow graphs of loaded
BPF programs with bpftool.
The filepaths in the records are absolute. To avoid blocks on the graph
to get too wide, we truncate them when they get too long (but we always
keep the entire file name). In the unlikely case where the resulting
file name is ambiguous, it remains possible to get the full path with a
regular dump (no CFG).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-7-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When dumping a program, the keywords "opcodes" (for printing the raw
opcodes), "linum" (for displaying the filename, line number, column
number along with the source code), and "visual" (for generating the
control flow graph for translated programs) are mutually exclusive. But
there's no reason why they should be. Let's make it possible to pass
several of them at once. The "file FILE" option, which makes bpftool
output a binary image to a file, remains incompatible with the others.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-6-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We do not support JSON output for control flow graphs of programs with
bpftool. So far, requiring both the CFG and JSON output would result in
producing a null JSON object. It makes more sense to raise an error
directly when parsing command line arguments and options, so that users
know they won't get any output they might expect.
If JSON is required for the graph, we leave it to Graphviz instead:
# bpftool prog dump xlated <REF> visual | dot -Tjson
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-5-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We support dumping the control flow graph of loaded programs to the DOT
format with bpftool, but so far this feature wouldn't display the source
code lines available through BTF along with the eBPF bytecode. Let's add
support for these annotations, to make it easier to read the graph.
In prog.c, we move the call to dump_xlated_cfg() in order to pass and
use the full struct dump_data, instead of creating a minimal one in
draw_bb_node().
We pass the pointer to this struct down to dump_xlated_for_graph() in
xlated_dumper.c, where most of the logics is added. We deal with BTF
mostly like we do for plain or JSON output, except that we cannot use a
"nr_skip" value to skip a given number of linfo records (we don't
process the BPF instructions linearly, and apart from the root of the
graph we don't know how many records we should skip, so we just store
the last linfo and make sure the new one we find is different before
printing it).
When printing the source instructions to the label of a DOT graph node,
there are a few subtleties to address. We want some special newline
markers, and there are some characters that we must escape. To deal with
them, we introduce a new dedicated function btf_dump_linfo_dotlabel() in
btf_dumper.c. We'll reuse this function in a later commit to format the
filepath, line, and column references as well.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-4-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When dumping the control flow graphs for programs using the 16-byte long
load instruction, we need to skip the second part of this instruction
when looking for the next instruction to process. Otherwise, we end up
printing "BUG_ld_00" from the kernel disassembler in the CFG.
Fixes: efcef17a6d ("tools: bpftool: generate .dot graph from CFG information")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The documentation states that when line_info is available when dumping a
program, the source line will be displayed "by default". There is no
notion of "default" here: the line is always displayed if available,
there is no way currently to turn it off.
In the next sentence, the documentation states that if "linum" is used
on the command line, the relevant filename, line, and column will be
displayed "on top of the source line". This is incorrect, as they are
currently displayed on the right side of the source line (or on top of
the eBPF instruction, not the source).
This commit fixes the documentation to address these points.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-2-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
qcom_smd_remove() always returned zero, though that isn't completely
trivial to see. So explain that in a comment and convert to
.remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230321154039.355098-4-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230321154039.355098-3-u.kleine-koenig@pengutronix.de
This function returned zero unconditionally. Convert it to return no
value instead. This makes it more obvious what happens in the callers.
One caller is converted to return zero explicitly. The only other caller
(smd_subdev_stop() in drivers/remoteproc/qcom_common.c) already ignored
the return value before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230321154039.355098-2-u.kleine-koenig@pengutronix.de
Commit 9d35dc3006 ("csky: Revert mmu ASID mechanism") removes the only
use of CONFIG_CPU_TLB_SIZE. Since then, this config has no effect and can
be deleted.
Remove the obsolete config CPU_TLB_SIZE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
before: last 6 bits of PID is used as index to store information about
tasks accessing VMA's.
after: hash_32 is used to take of cases where tasks are created over a
period of time, and thus improve collision probability.
Result:
The patch series overall improves autonuma cost.
Kernbench around more than 5% improvement and system time in mmtest
autonuma showed more than 80% improvement
Link: https://lkml.kernel.org/r/d5a9f75513300caed74e5c8570bba9317b963c2b.1677672277.git.raghavendra.kt@amd.com
Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Bharata B Rao <bharata@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Disha Talreja <dishaa.talreja@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This helps to ensure that only recently accessed PIDs scan the VMAs.
Current implementation: (idea supported by PeterZ)
1. Accessing PID information is maintained in two windows.
access_pids[1] being newest.
2. Reset old access PID info i.e. access_pid[0] every (4 *
sysctl_numa_balancing_scan_delay) interval after initial scan delay
period expires.
The above interval seemed to be experimentally optimum since it avoids
frequent reset of access info as well as helps clearing the old access
info regularly. The reset logic is implemented in scan path.
Link: https://lkml.kernel.org/r/f7a675f66d1442d048b4216b2baf94515012c405.1677672277.git.raghavendra.kt@amd.com
Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Bharata B Rao <bharata@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Disha Talreja <dishaa.talreja@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During Numa scanning make sure only relevant vmas of the tasks are
scanned.
Before:
All the tasks of a process participate in scanning the vma even if they
do not access vma in it's lifespan.
Now:
Except cases of first few unconditional scans, if a process do
not touch vma (exluding false positive cases of PID collisions)
tasks no longer scan all vma
Logic used:
1) 6 bits of PID used to mark active bit in vma numab status during
fault to remember PIDs accessing vma. (Thanks Mel)
2) Subsequently in scan path, vma scanning is skipped if current PID
had not accessed vma.
3) First two times we do allow unconditional scan to preserve earlier
behaviour of scanning.
Acknowledgement to Bharata B Rao <bharata@amd.com> for initial patch to
store pid information and Peter Zijlstra <peterz@infradead.org> (Usage of
test and set bit)
Link: https://lkml.kernel.org/r/092f03105c7c1d3450f4636b1ea350407f07640e.1677672277.git.raghavendra.kt@amd.com
Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Disha Talreja <dishaa.talreja@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pach series "sched/numa: Enhance vma scanning", v3.
The patchset proposes one of the enhancements to numa vma scanning
suggested by Mel. This is continuation of [3].
Reposting the rebased patchset to akpm mm-unstable tree (March 1)
Existing mechanism of scan period involves, scan period derived from
per-thread stats. Process Adaptive autoNUMA [1] proposed to gather NUMA
fault stats at per-process level to capture aplication behaviour better.
During that course of discussion, Mel proposed several ideas to enhance
current numa balancing. One of the suggestion was below
Track what threads access a VMA. The suggestion was to use an unsigned
long pid_mask and use the lower bits to tag approximately what threads
access a VMA. Skip VMAs that did not trap a fault. This would be
approximate because of PID collisions but would reduce scanning of areas
the thread is not interested in. The above suggestion intends not to
penalize threads that has no interest in the vma, thus reduce scanning
overhead.
V3 changes are mostly based on PeterZ comments (details below in changes)
Summary of patchset:
Current patchset implements:
1. Delay the vma scanning logic for newly created VMA's so that
additional overhead of scanning is not incurred for short lived tasks
(implementation by Mel)
2. Store the information of tasks accessing VMA in 2 windows. It is
regularly cleared in (4*sysctl_numa_balancing_scan_delay) interval.
The above time is derived from experimenting (Suggested by PeterZ) to
balance between frequent clearing vs obsolete access data
3. hash_32 used to encode task index accessing VMA information
4. VMA's acess information is used to skip scanning for the tasks
which had not accessed VMA
Changes since V2:
patch1:
- Renaming of structure, macro to function,
- Add explanation to heuristics
- Adding more details from result (PeterZ)
Patch2:
- Usage of test and set bit (PeterZ)
- Move storing access PID info to numa_migrate_prep()
- Add a note on fainess among tasks allowed to scan
(PeterZ)
Patch3:
- Maintain two windows of access PID information
(PeterZ supported implementation and Gave idea to extend
to N if needed)
Patch4:
- Apply hash_32 function to track VMA accessing PIDs (PeterZ)
Changes since RFC V1:
- Include Mel's vma scan delay patch
- Change the accessing pid store logic (Thanks Mel)
- Fencing structure / code to NUMA_BALANCING (David, Mel)
- Adding clearing access PID logic (Mel)
- Descriptive change log ( Mike Rapoport)
Things to ponder over:
==========================================
- Improvement to clearing accessing PIDs logic (discussed in-detail in
patch3 itself (Done in this patchset by implementing 2 window history)
- Current scan period is not changed in the patchset, so we do see
frequent tries to scan. Relaxing scan period dynamically could improve
results further.
[1] sched/numa: Process Adaptive autoNUMA
Link: https://lore.kernel.org/lkml/20220128052851.17162-1-bharata@amd.com/T/
[2] RFC V1 Link:
https://lore.kernel.org/all/cover.1673610485.git.raghavendra.kt@amd.com/
[3] V2 Link:
https://lore.kernel.org/lkml/cover.1675159422.git.raghavendra.kt@amd.com/
Results:
Summary: Huge autonuma cost reduction seen in mmtest. Kernbench improvement
is more than 5% and huge system time (80%+) improvement from mmtest autonuma.
(dbench had huge std deviation to post)
kernbench
===========
6.2.0-mmunstable-base 6.2.0-mmunstable-patched
Amean user-256 22002.51 ( 0.00%) 22649.95 * -2.94%*
Amean syst-256 10162.78 ( 0.00%) 8214.13 * 19.17%*
Amean elsp-256 160.74 ( 0.00%) 156.92 * 2.38%*
Duration User 66017.43 67959.84
Duration System 30503.15 24657.03
Duration Elapsed 504.61 493.12
6.2.0-mmunstable-base 6.2.0-mmunstable-patched
Ops NUMA alloc hit 1738835089.00 1738780310.00
Ops NUMA alloc local 1738834448.00 1738779711.00
Ops NUMA base-page range updates 477310.00 392566.00
Ops NUMA PTE updates 477310.00 392566.00
Ops NUMA hint faults 96817.00 87555.00
Ops NUMA hint local faults % 10150.00 2192.00
Ops NUMA hint local percent 10.48 2.50
Ops NUMA pages migrated 86660.00 85363.00
Ops AutoNUMA cost 489.07 442.14
autonumabench
===============
6.2.0-mmunstable-base 6.2.0-mmunstable-patched
Amean syst-NUMA01 399.50 ( 0.00%) 52.05 * 86.97%*
Amean syst-NUMA01_THREADLOCAL 0.21 ( 0.00%) 0.22 * -5.41%*
Amean syst-NUMA02 0.80 ( 0.00%) 0.78 * 2.68%*
Amean syst-NUMA02_SMT 0.65 ( 0.00%) 0.68 * -3.95%*
Amean elsp-NUMA01 313.26 ( 0.00%) 313.11 * 0.05%*
Amean elsp-NUMA01_THREADLOCAL 1.06 ( 0.00%) 1.08 * -1.76%*
Amean elsp-NUMA02 3.19 ( 0.00%) 3.24 * -1.52%*
Amean elsp-NUMA02_SMT 3.72 ( 0.00%) 3.61 * 2.92%*
Duration User 396433.47 324835.96
Duration System 2808.70 376.66
Duration Elapsed 2258.61 2258.12
6.2.0-mmunstable-base 6.2.0-mmunstable-patched
Ops NUMA alloc hit 59921806.00 49623489.00
Ops NUMA alloc miss 0.00 0.00
Ops NUMA interleave hit 0.00 0.00
Ops NUMA alloc local 59920880.00 49622594.00
Ops NUMA base-page range updates 152259275.00 50075.00
Ops NUMA PTE updates 152259275.00 50075.00
Ops NUMA PMD updates 0.00 0.00
Ops NUMA hint faults 154660352.00 39014.00
Ops NUMA hint local faults % 138550501.00 23139.00
Ops NUMA hint local percent 89.58 59.31
Ops NUMA pages migrated 8179067.00 14147.00
Ops AutoNUMA cost 774522.98 195.69
This patch (of 4):
Currently whenever a new task is created we wait for
sysctl_numa_balancing_scan_delay to avoid unnessary scanning overhead.
Extend the same logic to new or very short-lived VMAs.
[raghavendra.kt@amd.com: add initialization in vm_area_dup())]
Link: https://lkml.kernel.org/r/cover.1677672277.git.raghavendra.kt@amd.com
Link: https://lkml.kernel.org/r/7a6fbba87c8b51e67efd3e74285bb4cb311a16ca.1677672277.git.raghavendra.kt@amd.com
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Disha Talreja <dishaa.talreja@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Attempt VMA lock-based page fault handling first, and fall back to the
existing mmap_lock-based handling if that fails.
This is the s390 variant of "x86/mm: try VMA lock-based page fault handling
first".
Link: https://lkml.kernel.org/r/20230314132808.1266335-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vma->lock being part of the vm_area_struct causes performance regression
during page faults because during contention its count and owner fields
are constantly updated and having other parts of vm_area_struct used
during page fault handling next to them causes constant cache line
bouncing. Fix that by moving the lock outside of the vm_area_struct.
All attempts to keep vma->lock inside vm_area_struct in a separate cache
line still produce performance regression especially on NUMA machines.
Smallest regression was achieved when lock is placed in the fourth cache
line but that bloats vm_area_struct to 256 bytes.
Considering performance and memory impact, separate lock looks like the
best option. It increases memory footprint of each VMA but that can be
optimized later if the new size causes issues. Note that after this
change vma_init() does not allocate or initialize vma->lock anymore. A
number of drivers allocate a pseudo VMA on the stack but they never use
the VMA's lock, therefore it does not need to be allocated. The future
drivers which might need the VMA lock should use
vm_area_alloc()/vm_area_free() to allocate the VMA.
Link: https://lkml.kernel.org/r/20230227173632.3292573-34-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
call_rcu() can take a long time when callback offloading is enabled. Its
use in the vm_area_free can cause regressions in the exit path when
multiple VMAs are being freed.
Because exit_mmap() is called only after the last mm user drops its
refcount, the page fault handlers can't be racing with it. Any other
possible user like oom-reaper or process_mrelease are already synchronized
using mmap_lock. Therefore exit_mmap() can free VMAs directly, without
the use of call_rcu().
Expose __vm_area_free() and use it from exit_mmap() to avoid possible
call_rcu() floods and performance regressions caused by it.
Link: https://lkml.kernel.org/r/20230227173632.3292573-33-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Attempt VMA lock-based page fault handling first, and fall back to the
existing mmap_lock-based handling if that fails.
Link: https://lkml.kernel.org/r/20230227173632.3292573-31-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Attempt VMA lock-based page fault handling first, and fall back to the
existing mmap_lock-based handling if that fails.
Link: https://lkml.kernel.org/r/20230227173632.3292573-30-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a new CONFIG_PER_VMA_LOCK_STATS config option to dump extra statistics
about handling page fault under VMA lock.
Link: https://lkml.kernel.org/r/20230227173632.3292573-29-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Due to the possibility of handle_userfault dropping mmap_lock, avoid fault
handling under VMA lock and retry holding mmap_lock. This can be handled
more gracefully in the future.
Link: https://lkml.kernel.org/r/20230227173632.3292573-28-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Due to the possibility of do_swap_page dropping mmap_lock, abort fault
handling under VMA lock and retry holding mmap_lock. This can be handled
more gracefully in the future.
Link: https://lkml.kernel.org/r/20230227173632.3292573-27-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When vma->anon_vma is not set, page fault handler will set it by either
reusing anon_vma of an adjacent VMA if VMAs are compatible or by
allocating a new one. find_mergeable_anon_vma() walks VMA tree to find a
compatible adjacent VMA and that requires not only the faulting VMA to be
stable but also the tree structure and other VMAs inside that tree.
Therefore locking just the faulting VMA is not enough for this search.
Fall back to taking mmap_lock when vma->anon_vma is not set. This
situation happens only on the first page fault and should not affect
overall performance.
Link: https://lkml.kernel.org/r/20230227173632.3292573-25-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce lock_vma_under_rcu function to lookup and lock a VMA during page
fault handling. When VMA is not found, can't be locked or changes after
being locked, the function returns NULL. The lookup is performed under
RCU protection to prevent the found VMA from being destroyed before the
VMA lock is acquired. VMA lock statistics are updated according to the
results. For now only anonymous VMAs can be searched this way. In other
cases the function returns NULL.
Link: https://lkml.kernel.org/r/20230227173632.3292573-24-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Per-vma locking mechanism will search for VMA under RCU protection and
then after locking it, has to ensure it was not removed from the VMA tree
after we found it. To make this check efficient, introduce a
vma->detached flag to mark VMAs which were removed from the VMA tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-23-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Page fault handlers might need to fire MMU notifications while a new
notifier is being registered. Modify mm_take_all_locks to write-lock all
VMAs and prevent this race with page fault handlers that would hold VMA
locks. VMAs are locked before i_mmap_rwsem and anon_vma to keep the same
locking order as in page fault handlers.
Link: https://lkml.kernel.org/r/20230227173632.3292573-22-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Normally free_pgtables needs to lock affected VMAs except for the case
when VMAs were isolated under VMA write-lock. munmap() does just that,
isolating while holding appropriate locks and then downgrading mmap_lock
and dropping per-VMA locks before freeing page tables. Add a parameter to
free_pgtables for such scenario.
Link: https://lkml.kernel.org/r/20230227173632.3292573-20-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Write-lock VMA as locked before copying it and when copy_vma produces a
new VMA.
Link: https://lkml.kernel.org/r/20230227173632.3292573-18-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Write-lock all VMAs which might be affected by a merge, split, expand or
shrink operations. All these operations use vma_prepare() before making
the modifications, therefore it provides a centralized place to perform
VMA locking.
[surenb@google.com: remove unnecessary vp->vma check in vma_prepare]
Link: https://lkml.kernel.org/r/20230301022720.1380780-1-surenb@google.com
Link: https://lore.kernel.org/r/202302281802.J93Nma7q-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230227173632.3292573-17-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Laurent Dufour <laurent.dufour@fr.ibm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Protect VMA from concurrent page fault handler while collapsing a huge
page. Page fault handler needs a stable PMD to use PTL and relies on
per-VMA lock to prevent concurrent PMD changes. pmdp_collapse_flush(),
set_huge_pmd() and collapse_and_free_pmd() can modify a PMD, which will
not be detected by a page fault handler without proper locking.
Before this patch, page tables can be walked under any one of the
mmap_lock, the mapping lock, and the anon_vma lock; so when khugepaged
unlinks and frees page tables, it must ensure that all of those either are
locked or don't exist. This patch adds a fourth lock under which page
tables can be traversed, and so khugepaged must also lock out that one.
[surenb@google.com: vm_lock/i_mmap_rwsem inversion in retract_page_tables]
Link: https://lkml.kernel.org/r/20230303213250.3555716-1-surenb@google.com
[surenb@google.com: build fix]
Link: https://lkml.kernel.org/r/CAJuCfpFjWhtzRE1X=J+_JjgJzNKhq-=JT8yTBSTHthwp0pqWZw@mail.gmail.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-16-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vma_prepare() acquires all locks required before VMA modifications. Move
vma_prepare() before vma_adjust_trans_huge() so that VMA is locked before
any modification.
Link: https://lkml.kernel.org/r/20230227173632.3292573-15-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Updates to vm_flags have to be done with VMA marked as being written for
preventing concurrent page faults or other modifications.
Link: https://lkml.kernel.org/r/20230227173632.3292573-14-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
