Dereferencing RCU objects within the RCU callback without the RCU check
has caused lockdep to complain. Fix the RCU dereferencing by using the
RCU callback lock to ensure the operation is safe.
Also stop creating a new lock to use for dereferencing during destruction
of the tree or subtree. Instead, pass through a pointer to the tree that
has the lock that is held for RCU dereferencing checking. It also does
not make sense to use the maple state in the freeing scenario as the tree
walk is a special case where the tree no longer has the normal encodings
and parent pointers.
Link: https://lkml.kernel.org/r/20230227173632.3292573-8-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add an smp_rmb() before reading the parent pointer to ensure that anything
read from the node prior to the parent pointer hasn't been reordered ahead
of this check.
The is necessary for RCU mode.
Link: https://lkml.kernel.org/r/20230227173632.3292573-7-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During the development of the maple tree, the strategy of freeing multiple
nodes changed and, in the process, the pivots were reused to store
pointers to dead nodes. To ensure the readers see accurate pivots, the
writers need to mark the nodes as dead and call smp_wmb() to ensure any
readers can identify the node as dead before using the pivot values.
There were two places where the old method of marking the node as dead
without smp_wmb() were being used, which resulted in RCU readers seeing
the wrong pivot value before seeing the node was dead. Fix this race
condition by using mte_set_node_dead() which has the smp_wmb() call to
ensure the race is closed.
Add a WARN_ON() to the ma_free_rcu() call to ensure all nodes being freed
are marked as dead to ensure there are no other call paths besides the two
updated paths.
This is necessary for the RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-6-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The call to mte_set_dead_node() before the smp_wmb() already calls
smp_wmb() so this is not needed. This is an optimization for the RCU mode
of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-5-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The walk to destroy the nodes was not always setting the node type and
would result in a destroy method potentially using the values as nodes.
Avoid this by setting the correct node types. This is necessary for the
RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-4-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When initially starting a search, the root node may already be in the
process of being replaced in RCU mode. Detect and restart the walk if
this is the case. This is necessary for RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-3-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix VMA tree modification under mmap read lock".
Syzbot reported a BUG_ON in mm/mmap.c which was found to be caused by an
inconsistency between threads walking the VMA maple tree. The
inconsistency is caused by the page fault handler modifying the maple tree
while holding the mmap_lock for read.
This only happens for stack VMAs. We had thought this was safe as it only
modifies a single pivot in the tree. Unfortunately, syzbot constructed a
test case where the stack had no guard page and grew the stack to abut the
next VMA. This causes us to delete the NULL entry between the two VMAs
and rewrite the node.
We considered several options for fixing this, including dropping the
mmap_lock, then reacquiring it for write; and relaxing the definition of
the tree to permit a zero-length NULL entry in the node. We decided the
best option was to backport some of the RCU patches from -next, which
solve the problem by allocating a new node and RCU-freeing the old node.
Since the problem exists in 6.1, we preferred a solution which is similar
to the one we intended to merge next merge window.
These patches have been in -next since next-20230301, and have received
intensive testing in Android as part of the RCU page fault patchset. They
were also sent as part of the "Per-VMA locks" v4 patch series. Patches 1
to 7 are bug fixes for RCU mode of the tree and patch 8 enables RCU mode
for the tree.
Performance v6.3-rc3 vs patched v6.3-rc3: Running these changes through
mmtests showed there was a 15-20% performance decrease in
will-it-scale/brk1-processes. This tests creating and inserting a single
VMA repeatedly through the brk interface and isn't representative of any
real world applications.
This patch (of 8):
ma_pivots() and ma_data_end() may be called with a dead node. Ensure to
that the node isn't dead before using the returned values.
This is necessary for RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230327185532.2354250-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-2-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Li <chriscli@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: freak07 <michalechner92@googlemail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There's no need for "#address-cells/#size-cells" in the brcm,sf2 node as
no immediate child nodes have an address. What was probably intended was
to put them in the 'ports' node, but that's not necessary as that is
covered by ethernet-switch.yaml via dsa.yaml.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230404204152.635400-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The schema doesn't allow for a single (unaddressed) ethernet port node
nor does a single port switch make much sense. So if there's always
multiple child nodes, "#address-cells" and "#size-cells" should be
required.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230404204213.635773-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Smaller pull request this time, sending this early to fix the conflict
in mac80211. Nothing really special this time, only smaller changes.
Note: We pulled wireless into wireless-next to fix a complicated
conflict in mac80211.
Major changes:
mac80211/cfg80211
* enable Wi-Fi 7 (EHT) mesh support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmQtVs0RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvtRwgAiyCCYwhxj3BXwrtr5u4X+RCAQ/8LSrpu
ju8M7DigiDVUuSX7fS99LGMOBenKLg6S4f2wtj10tKSbr0D4Qjruv6JpERDgvhIn
RDJg8QBB5urGWvI6lKf0K+xWDrpPhb3RV/yCnVQU+3t/B7sLwC2pAJJmyRJNEXaB
sLpAGcbQQizRhHp3gVzuxSmkqnX1KfxehN5f+AeL55U3Jw3+vKmk+Ekd/GXrDEk5
Q8CWcikTthsn2+CTekVNUgg2gQyL9fF1hRwuhPph8Tcxow2SYe3DX+Yj/So25tv/
4Gp+GLdMOAKuPCntOE9A8YHVbA+JLlzbfOwF6g5kgREmagwW6GoyMA==
=zsHH
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.3
Smaller pull request this time, sending this early to fix the conflict
in mac80211. Nothing really special this time, only smaller changes.
* enable Wi-Fi 7 (EHT) mesh support
* tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (37 commits)
wifi: rt2x00: Fix memory leak when handling surveys
wifi: b43legacy: Remove the unused function prev_slot()
wifi: rtw89: Remove redundant pci_clear_master
wifi: rtw89: fix potential race condition between napi_init and napi_enable
wifi: rtw89: config EDCCA threshold during scan to prevent TX failed
wifi: rtw89: fix incorrect channel info during scan due to ppdu_sts filtering
wifi: rtw89: remove superfluous H2C of join_info
wifi: rtw89: set data lowest rate according to AP supported rate
wifi: rtw89: add counters of register-based H2C/C2H
wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.1
wifi: rtw89: coex: Add report control v5 variation
wifi: rtw89: coex: Update RTL8852B LNA2 hardware parameter
wifi: rtw89: coex: Not to enable firmware report when WiFi is power saving
wifi: rtw89: coex: Add LPS protocol radio state for RTL8852B
bcma: remove unused mips_read32 function
bcma: Use of_address_to_resource()
wifi: mwifiex: remove unused evt_buf variable
wifi: brcmsmac: ampdu: remove unused suc_mpdu variable
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg()
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg()
...
====================
Link: https://lore.kernel.org/r/20230405111037.4792BC43443@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mt76 has a fix for leaking cleartext frames on a certain scenario and
two firmware file handling related fixes. For brcmfmac we have a fix
for an older SDIO suspend regression and for ath11k avoiding a kernel
crash during hibernation with SUSE kernels.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmQtUzQRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuz/wgAlpzStpfnJkVUJRRjCb0yWDPKz+NYYeLh
wQ3Ad+T/KUiav870DlFStRcaZTUi6JyIk61cEnIk6ZB36ivCML6KJ/7GAZFIcI2l
lq/dY8zG2GX0kkSufw24P+6tD3LQguejMv0YHYVUEEXTo4b16dyE5nja2acaOjQI
LDQY6Gq5A/TdMyq9VPLWpPjBJkwEWjexyzJu57A4hExgGZviMAyVWNlBdNOkRn2E
sMt/4ibgchVTxnmHfvS8d+gmEuxiMLi7PHn17gY80kHh2seCc9ODg6EbVxvIi18b
gUj6QXfD9dSJ+ghhV3M7oH+6GLSXDf/c+f1Xy8gupupoQiDxJ+T8UQ==
=mdQP
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.3
mt76 has a fix for leaking cleartext frames on a certain scenario and
two firmware file handling related fixes. For brcmfmac we have a fix
for an older SDIO suspend regression and for ath11k avoiding a kernel
crash during hibernation with SUSE kernels.
* tag 'wireless-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mt76: ignore key disable commands
wifi: ath11k: reduce the MHI timeout to 20s
wifi: mt76: mt7921: fix fw used for offload check for mt7922
wifi: mt76: mt7921: Fix use-after-free in fw features query.
wifi: brcmfmac: Fix SDIO suspend/resume regression
====================
Link: https://lore.kernel.org/r/20230405105536.4E946C433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmQtPNcTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6DYXB/wKpuSPkpn6VHES2Gv3kl1+v3eOSCVI
gt6rNy5HbxcsezYZTbfOzqlh2wxOMdZNDsbG9jDm2W/knwDP01JY0OhQLcxUT6w0
xFgWnoTTkGVtkjPSEE/BL5cy5YMvjbBF2Xn9d6aTDms5BJPdY2mz8NpjITBcf2bd
CLcqCthK2DabZQR9WWVDgGP/q2b+hKDBefioEfX9EbBTAYZ9+0HjMhFl1MdTQ1li
rnva5EFx9XmzqXyBhB+iOZFSgHAxdEF2ZhVN48mDsqAee5jw/COoTv1qc4qMSX79
dCkYP1oTRW39NBkCtw252YbwaYzn9RPhPjPy3kLx7+H/0AWft2ns6wBh
=Dgqo
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.3-20230405' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-04-05
The first patch is by Oleksij Rempel and fixes a out-of-bounds memory
access in the j1939 protocol.
The remaining 3 patches target the ISOTP protocol. Oliver Hartkopp
fixes the ISOTP protocol to pass information about dropped PDUs to the
user space via control messages. Michal Sojka's patch fixes poll() to
not forward false EPOLLOUT events. And Oliver Hartkopp fixes a race
condition between isotp_sendsmg() and isotp_release().
* tag 'linux-can-fixes-for-6.3-20230405' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: isotp: fix race between isotp_sendsmg() and isotp_release()
can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos
can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
====================
Link: https://lore.kernel.org/r/20230405092444.1802340-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-04-04 (ice)
This series contains updates to ice driver only.
Simei adjusts error path on adding VF Flow Director filters that were
not releasing all resources.
Lingyu adds setting/resetting of VF Flow Director filters counters
during initialization.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Reset FDIR counter in FDIR init stage
ice: fix wrong fallback logic for FDIR
====================
Link: https://lore.kernel.org/r/20230404172306.450880-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmQsOSQTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6N+QB/4w/slgDq0yAYs0GTsRA3Z3IGp8OAlp
PI6g1y9npiR7ffFdnC7ldYRSzTg2sStEKhe0xv80zOPl8IpI82Bz5a7oSb2Oi9tH
Fuf2JF2KYt08VfhGQKmhhcWHSh/vyCrAt14s8P2sCGQPEFBm2N8qrB9hhZera3Xb
gwNG+1nFjuFlUdRxMVQXLmyBdccl/+OLdtU/tI3Y4xm57Fxnghq7DyvmdGumJsbN
6zlyi+FTF3PGgOWglS/2rZeOO4PPWgfsZEeM6jhAt1E2ijtMJSQUl3w1Fpo6dcnq
49wSMFySI8jwpewLgZctZNheb73wvuvAqXnmPm8Krd0hi/apL79Tb1OE
=lDzw
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-04-04-2
The first patch is by Oliver Hartkopp and makes the maximum pdu size
of the CAN ISOTP protocol configurable.
The following 5 patches are by Dario Binacchi and add support for the
bxCAN controller by ST.
Geert Uytterhoeven's patch for the rcar_canfd driver fixes a sparse
warning.
Peng Fan's patch adds an optional power-domains property to the
flexcan device tree binding.
Frank Jungclaus adds support for CAN_CTRLMODE_BERR_REPORTING to the
esd_usb driver.
The last patch is by Oliver Hartkopp and converts the USB IDs of the
kvaser_usb driver to hexadecimal values.
* tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
kvaser_usb: convert USB IDs to hexadecimal values
can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING
dt-bindings: can: fsl,flexcan: add optional power-domains property
can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init
can: bxcan: add support for ST bxCAN controller
ARM: dts: stm32: add pin map for CAN controller on stm32f4
ARM: dts: stm32: add CAN support on stm32f429
dt-bindings: net: can: add STM32 bxcan DT bindings
dt-bindings: arm: stm32: add compatible for syscon gcan node
can: isotp: add module parameter for maximum pdu size
====================
Link: https://lore.kernel.org/r/20230404145908.1714400-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Close the "current_clocksource" file descriptor before returning or exiting
from stable_tsc_check_supported() in vmx_nested_tsc_scaling_test.
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Link: https://lore.kernel.org/r/20230405101350.259000-1-gehao@kylinos.cn
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disallow enabling LBR support if the CPU supports architectural LBRs.
Traditional LBR support is absent on CPU models that have architectural
LBRs, and KVM doesn't yet support arch LBRs, i.e. KVM will pass through
non-existent MSRs if userspace enables LBRs for the guest.
Cc: stable@vger.kernel.org
Cc: Yang Weijiang <weijiang.yang@intel.com>
Cc: Like Xu <like.xu.linux@gmail.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: be635e34c2 ("KVM: vmx/pmu: Expose LBR_FMT in the MSR_IA32_PERF_CAPABILITIES")
Tested-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230128001427.2548858-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
smatch reports
arch/x86/kvm/x86.c:199:20: warning: symbol
'mitigate_smt_rsb' was not declared. Should it be static?
This variable is only used in one file so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230404010141.1913667-1-trix@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The kvm_pmu_refresh() may be called repeatedly (e.g. configure guest
CPUID repeatedly or update MSR_IA32_PERF_CAPABILITIES) and each
call will use the last pmu->all_valid_pmc_idx value, with the residual
bits introducing additional overhead later in the vPMU emulation.
Fixes: b35e5548b4 ("KVM: x86/vPMU: Add lazy mechanism to release perf_event per vPMC")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230404071759.75376-1-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Include the device and connector information in the SCDC
debugs. Makes it easier to figure out who did what.
v2: Rely on connector->ddc (Maxime)
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403223652.18848-1-ville.syrjala@linux.intel.com
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
In some cases the loopback latency might be large enough, causing
the assertion on invocations to be run before ingress prog getting
executed. The assertion would fail and the test would flake.
This can be reliably reproduced by arbitrarily increasing the
loopback latency (thanks to [1]):
tc qdisc add dev lo root handle 1: htb default 12
tc class add dev lo parent 1:1 classid 1:12 htb rate 20kbps ceil 20kbps
tc qdisc add dev lo parent 1:12 netem delay 100ms
Fix this by waiting on the receive end, instead of instantly
returning to the assert. The call to read() will wait for the
default SO_RCVTIMEO timeout of 3 seconds provided by
start_server().
[1] https://gist.github.com/kstevens715/4598301
Reported-by: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/bpf/9c5c8b7e-1d89-a3af-5400-14fde81f4429@linux.dev/
Fixes: 3573f38401 ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress")
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Link: https://lore.kernel.org/r/20230405193354.1956209-1-zhuyifei@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Merge Hal's series adding support for the new StarFive JH7110 SoC.
There's a few bindings here for core components that were not picked up
by the various maintainers for the subsystems (previously Palmer would
pick these up via the RISC-V tree) & the first two commits in the branch
are shared with the clk tree, since the dts depends on defines in the
dt-binding headers.
This is based on -rc2, as the board does not actually boot on -rc1
due to the bug Linus introduced.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Merge series from William Breathitt Gray <william.gray@linaro.org>:
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
A patch to pass irq_drv_data as a parameter for struct regmap_irq_chip
set_type_config() is included. This is needed by the
idio_24_set_type_config() and ws16c48_set_type_config() callbacks in
order to update the type configuration on their respective devices.
Apparently drivers need to check all this stuff themselves, which for
most things makes sense I guess. And for everything else we luck out,
because modern distros stopped supporting any other fbdev drivers than
drm ones and I really don't want to argue anymore about who needs to
check stuff. Therefore fixing all this just for drm fbdev emulation is
good enough.
Note that var->active is not set or validated. This is just control
flow for fbmem.c and needs to be validated in there as needed.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404194038.472803-3-daniel.vetter@ffwll.ch
The fb_check_var hook is supposed to validate all this stuff. Any
errors from fb_set_par are considered driver/hw issues and resulting
in dmesg warnings.
Luckily we do fix up the pixclock already, so this is all fine.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404194038.472803-2-daniel.vetter@ffwll.ch
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present.
Add unevaluatedProperties or additionalProperties as appropriate, and
then add any missing properties flagged by the addition.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230124230228.372305-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
We introduce a new HAS_IOPORT Kconfig option to indicate support for I/O
Port access. In a future patch HAS_IOPORT=n will disable compilation of
the I/O accessor functions inb()/outb() and friends on architectures
which can not meaningfully support legacy I/O spaces such as s390.
The following architectures do not select HAS_IOPORT:
* ARC
* C-SKY
* Hexagon
* Nios II
* OpenRISC
* s390
* User-Mode Linux
* Xtensa
All other architectures select HAS_IOPORT at least conditionally.
The "depends on" relations on HAS_IOPORT in drivers as well as ifdefs
for HAS_IOPORT specific sections will be added in subsequent patches on
a per subsystem basis.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net> # for ARCH=um
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pci_bus_for_each_resource() can hide the iterator index if it is not needed
otherwise. Drop the index from pci_eisa_init() since it's not needed there.
Link: https://lore.kernel.org/r/20230330162434.35055-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Refactor pci_bus_for_each_resource() in the same way as
pci_dev_for_each_resource(). This allows the index to be hidden inside the
implementation so the caller can omit it when it's not used otherwise.
No functional changes intended.
Link: https://lore.kernel.org/r/20230330162434.35055-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fix flaky STATS_RX_DROPPED test. The receiver calls getsockopt after
receiving the last (valid) packet which is not the final packet sent in
the test (valid and invalid packets are sent in alternating fashion with
the final packet being invalid). Since the last packet may or may not
have been dropped already, both outcomes must be allowed.
This issue could also be fixed by making sure the last packet sent is
valid. This alternative is left as an exercise to the reader (or the
benevolent maintainers of this file).
This problem was quite visible on certain setups. On one machine this
failure was observed 50% of the time.
Also, remove a redundant assignment of pkt_stream->nb_pkts. This field
is already initialized by __pkt_stream_alloc.
Fixes: 27e934bec3 ("selftests: xsk: make stat tests not spin on getsockopt")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403120400.31018-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This change fixes flakiness in the BIDIRECTIONAL test:
# [is_pkt_valid] expected length [60], got length [90]
not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL
When IPv6 is enabled, the interface will periodically send MLDv1 and
MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail
since it uses VETH0 for RX.
For other tests, this was not a problem since they only receive on VETH1
and IPv6 was already disabled on VETH0.
Fixes: a89052572e ("selftests/bpf: Xsk selftests framework")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405082905.6303-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
All users of these fields have been removed.
They are now computed when needed with [mn]shift and [mn]width.
This shrinks the size of struct clk_fractional_divider from 72 to 56 bytes.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/680357e5acb338433bfc94114b65b4a4ce2c99e2.1680423909.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
sgx_get_encls_gva() uses is_long_mode() to check 64-bit mode, however,
SGX system leaf instructions are valid in compatibility mode, should
use is_64_bit_mode() instead.
Fixes: 70210c044b ("KVM: VMX: Add SGX ENCLS[ECREATE] handler to enforce CPUID restrictions")
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230404032502.27798-1-binbin.wu@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Create test suite called "kunit_current" to add test coverage for the use
of current->kunit_test, which returns the current KUnit test.
Add two test cases:
- kunit_current_test to test current->kunit_test and the method
kunit_get_current_test(), which utilizes current->kunit_test.
- kunit_current_fail_test to test the method
kunit_fail_current_test(), which utilizes current->kunit_test.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add basic support to run SH under QEMU via kunit_tool using the
virtualized r2d platform.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
On some platforms, the console is not the first serial port. To make
this work, the first serial port in QEMU must be set to "null".
Add support for this by adding an optional "serial" parameter, which
defaults to "stdio", and can be overridden by platform-specific
configuration.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are almost dozen of .kunitconfig files that are ignored but
tracked. Unignore them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Kal Conley says:
====================
This patchset fixes a minor bug in xskxceiver.c then adds a test case
for valid packets at the end of the UMEM.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add test case to testapp_invalid_desc for valid packets at the end of
the UMEM.
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403145047.33065-3-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when
the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the
macro since it's no longer being used.
Fixes: 909f0e2820 ("selftests: xsk: Add tests for 2K frame size")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403145047.33065-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The Lenovo ThinkPad W530 uses a nvidia k1000m GPU. When this gets used
together with one of the older nvidia binary driver series (the latest
series does not support it), then backlight control does not work.
This is caused by commit 3dbc80a3e4 ("ACPI: video: Make backlight
class device registration a separate step (v2)") combined with
commit 5aa9d943e9 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default").
After these changes the acpi_video# backlight device is only registered
when requested by a GPU driver calling acpi_video_register_backlight()
which the nvidia binary driver does not do.
I realize that using the nvidia binary driver is not a supported use-case
and users can workaround this by adding acpi_backlight=video on the kernel
commandline, but the ThinkPad W530 is a popular model under Linux users,
so it seems worthwhile to add a quirk for this.
I will also email Nvidia asking them to make the driver call
acpi_video_register_backlight() when an internal LCD panel is detected.
So maybe the next maintenance release of the drivers will fix this...
Fixes: 5aa9d943e9 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On the Apple iMac14,1 and iMac14,2 all-in-ones (monitors with builtin "PC")
the connection between the GPU and the panel is seen by the GPU driver as
regular DP instead of eDP, causing the GPU driver to never call
acpi_video_register_backlight().
(GPU drivers only call acpi_video_register_backlight() when an internal
panel is detected, to avoid non working acpi_video# devices getting
registered on desktops which unfortunately is a real issue.)
Fix the missing acpi_video# backlight device on these all-in-ones by
adding a acpi_backlight=video DMI quirk, so that video.ko will
immediately register the backlight device instead of waiting for
an acpi_video_register_backlight() call.
Fixes: 5aa9d943e9 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 3dbc80a3e4 ("ACPI: video: Make backlight class device
registration a separate step (v2)") combined with
commit 5aa9d943e9 ("ACPI: video: Don't enable fallback path for
creating ACPI backlight by default")
Means that the video.ko code now fully depends on the GPU driver calling
acpi_video_register_backlight() for the acpi_video# backlight class
devices to get registered.
This means that if the GPU driver does not do this, acpi_backlight=video
on the cmdline, or DMI quirks for selecting acpi_video# will not work.
This is a problem on for example Apple iMac14,1 all-in-ones where
the monitor's LCD panel shows up as a regular DP connection instead of
eDP so the GPU driver will not call acpi_video_register_backlight() [1].
Fix this by making video.ko directly register the acpi_video# devices
when these have been explicitly requested either on the cmdline or
through DMI quirks (rather then auto-detection being used).
[1] GPU drivers only call acpi_video_register_backlight() when an internal
panel is detected, to avoid non working acpi_video# devices getting
registered on desktops which unfortunately is a real issue.
Fixes: 5aa9d943e9 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Allow callers of __acpi_video_get_backlight_type() to pass a pointer
to a bool which will get set to false if the backlight-type comes from
the cmdline or a DMI quirk and set to true if auto-detection was used.
And make __acpi_video_get_backlight_type() non static so that it can
be called directly outside of video_detect.c .
While at it turn the acpi_video_get_backlight_type() and
acpi_video_backlight_use_native() wrappers into static inline functions
in include/acpi/video.h, so that we need to export one less symbol.
Fixes: 5aa9d943e9 ("ACPI: video: Don't enable fallback path for creating ACPI backlight by default")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A rake of patches, initially worked on by Emil & later picked up by Hal
that add support for the sys/aon clock & reset controllers on StarFive's
JH7110 SoC.
This SoC is largely similar to the existing JH7100, so a bunch of
refactoring is done to share as many bits as possible between the two.
What's here (plus the already applied pinctrl bits) should be sufficient
to boot a basic initramfs.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZC2YXQAKCRB4tDGHoIJi
0h4lAQD74SPhpHkKOgKuGSLddrnK8jMGpaBAcWJZuEb9ftYZvgD/ahxHryPfDk1S
q2qU4A1LbhOC0XfJglz8JsdgF+6b+Qs=
=PEdI
-----END PGP SIGNATURE-----
Merge tag 'riscv-jh7110-clk-reset-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into clk-starfive
Pull Starfive clk driver updates from Conor Dooley:
- Initial JH7110 clk/reset support
A rake of patches, initially worked on by Emil & later picked up by Hal
that add support for the sys/aon clock & reset controllers on StarFive's
JH7110 SoC.
This SoC is largely similar to the existing JH7100, so a bunch of
refactoring is done to share as many bits as possible between the two.
What's here (plus the already applied pinctrl bits) should be sufficient
to boot a basic initramfs.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-jh7110-clk-reset-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: generalise StarFive clk/reset entries
reset: starfive: Add StarFive JH7110 reset driver
clk: starfive: Add StarFive JH7110 always-on clock driver
clk: starfive: Add StarFive JH7110 system clock driver
reset: starfive: jh71x0: Use 32bit I/O on 32bit registers
reset: starfive: Rename "jh7100" to "jh71x0" for the common code
reset: starfive: Extract the common JH71X0 reset code
reset: starfive: Factor out common JH71X0 reset code
reset: Create subdirectory for StarFive drivers
reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
clk: starfive: Rename "jh7100" to "jh71x0" for the common code
clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h
clk: starfive: Factor out common JH7100 and JH7110 code
clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
