Make STACK_INIT_OFFSET also available for assembler code, and
use it everywhere instead of open-coding it at several places.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The pattern for all in_<type>_stack() functions is the same; especially
also the size of all stacks is the same. Simplify the code by passing only
the stack address to the generic in_stack() helper, which then can assume a
THREAD_SIZE sized stack.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The preparation of the key data struct for a CCA RSA ME
operation had some improvement to skip leading zeros
in the key's exponent. However, all supported CCA cards
nowadays support leading zeros in key tokens.
So for simplifying the CCA key preparing code, this
patch simply removes this optimization code.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There was some ancient code which padded the results of
a clear key ME or CRT operation with some PKCS 1.2 header.
According to the comment this was only needed by crypto
cards older than the CEX2. These cards are not supported
any more and so this patch removes this obscure result
padding code.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Currently, exception tables are marked as ro_after_init. However,
since they are sorted during compile time using scripts/sorttable,
they can be moved to RO_DATA using the RO_EXCEPTION_TABLE_ALIGN macro,
which is specifically designed for this purpose.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since commit 4efd417f29 ("s390: raise minimum supported machine
generation to z10"), the long-displacement facility is assumed and
required for the kernel. Clean up a couple of places in the entry code,
where long-displacement could be used directly instead of using a base
register.
However, there are still a few other places where a base register has
to be used to extend short-displacement for the second lowcore page
access. Notably, boot/head.S still has to be built for z900, and in
mcck_int_handler, spt and lbear, which don't have long-displacements,
but need to access save areas at the second lowcore page.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Heiko Carstens says:
===================
There are a couple of oddities within the s390 uaccess library
functions. Therefore cleanup the whole uaccess.c file.
There is no functional change, only improved readability. The output
of "objdump -Dr" was always compared before/after each patch to make
sure that the generated object file is identical, if that could be
expected. Therefore the series also includes more patches than really
required to cleanup the code.
Furthermore the kunit usercopy tests also still pass.
===================
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In order to get uaccess.c (nearly) checkpatch warning free remove an
extra blank line:
CHECK: Blank lines aren't necessary before a close brace '}'
+
+}
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Get rid of the not needed val local variable and pass the constant
value directly as operand value. In addition this turns the val
operand into an input operand, since it is not changed within the
inline assemblies.
This in turn requires also to add the earlyclobber contraint modifier
to all output operands, since the (former) val operand is used after
all output variants have been modified.
The usercopy kunit tests still pass after this change.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Rename tmp1 and tmp2 variables to more meaningful val (for value) and rem
(for remainder).
Except for debug sections the output of "objdump -Dr" of the uaccess object
file is identical before/after this change.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Rename and sort labels in uaccess inline assemblies to increase
readability. In addition have only one EX_TABLE entry per line - also to
increase readability.
Except for debug sections the output of "objdump -Dr" of the uaccess object
file is identical before/after this change.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Improve readability of the uaccess inline assemblies by using symbolic
names for all input and output operands.
Except for debug sections the output of "objdump -Dr" of the uaccess object
file is identical before/after this change.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
As reported by leak sanitizer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brian Robbins <brianrob@linux.microsoft.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20230403203545.1872196-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cxa demangle support isn't dependent on libelf and so we no longer
need to disable demangling if libelf isn't present.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230403211021.1892231-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ignore SIGPIPEs when addr2line is configured.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230403184033.1836023-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sentinel value differs for llvm-addr2line. Configure this once and
then detect when reading records.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230403184033.1836023-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't wrap stdin and stdout of subprocess with streams, use the api/io
library for buffering.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230403184033.1836023-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reads a line to allocated memory up to a newline following the getline
API.
Committer notes:
It also adds this new function to the 'api io' 'perf test' entry:
$ perf test "api io"
64: Test api io : Ok
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230403184033.1836023-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel-PT calls perf_pmu__scan_file() a lot, let's use relative address
when it accesses multiple files at one place.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230331202949.810326-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These two helpers will also use openat() to reduce the overhead with
relative pathnames. Convert other functions in pmu_lookup() to use
the new helpers.
Committer testing:
Before:
⬢[acme@toolbox perf-tools-next]$ perf bench internals pmu-scan
# Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average PMU scanning took: 2729.040 usec (+- 7.117 usec)
⬢[acme@toolbox perf-tools-next]$
After:
⬢[acme@toolbox perf-tools-next]$ perf bench internals pmu-scan
# Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average PMU scanning took: 2419.870 usec (+- 9.057 usec)
⬢[acme@toolbox perf-tools-next]$
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230331202949.810326-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Likewise, x86 needs to traverse the PMU list to build alias.
Let's use the new helpers to use relative paths.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230331202949.810326-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Likewise, it needs to traverse the pmu/caps directory, let's use
openat() with the dirfd instead of open() using the absolute path.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230331202949.810326-2-namhyung@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PMU information is in the kernel sysfs so it needs to scan the
directory to get the whole information like event aliases, formats and
so on. During the traversal, it opens a lot of files and directories
like below:
dir = opendir("/sys/bus/event_source/devices");
while (dentry = readdir(dir)) {
char buf[PATH_MAX];
snprintf(buf, sizeof(buf), "%s/%s",
"/sys/bus/event_source/devices", dentry->d_name);
fd = open(buf, O_RDONLY);
...
}
But this is not good since it needs to copy the string to build the
absolute pathname, and it makes redundant pathname walk (from the /sys)
unnecessarily. We can use openat(2) to open the file in the given
directory. While it's not a problem ususally, it can be a problem when
the kernel has contentions on the sysfs.
Add a couple of new helper to return the file descriptor of PMU
directory so that it can use it with relative paths.
* perf_pmu__event_source_devices_fd()
- returns a fd for the PMU root ("/sys/bus/event_source/devices")
* perf_pmu__pathname_fd()
- returns a fd for "<pmu>/<file>" under the PMU root
Now the above code can be converted something like below:
dirfd = perf_pmu__event_source_devices_fd();
dir = fdopendir(dirfd);
while (dentry = readdir(dir)) {
fd = openat(dirfd, dentry->d_name, O_RDONLY);
...
}
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230331202949.810326-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pmu-scan benchmark will repeatedly scan the sysfs to get the
available PMU information.
$ ./perf bench internals pmu-scan
# Running 'internals/pmu-scan' benchmark:
Computing performance of sysfs PMU event scan for 100 times
Average PMU scanning took: 6850.990 usec (+- 48.445 usec)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230331202949.810326-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It seems there's no function to delete the perf pmu struct. Add the
perf_pmu__destroy() to do the job. While at it, add some more helper
functions to delete pmu aliases and caps.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230331202949.810326-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the parse_events_multi_pmu_add() it passes the 'config' variable
twice to parse_events_term__num() - one for config and another for
loc_term. I'm not sure about the second one as it's converted to
YYLTYPE variable. Asan reports it like below:
In function ‘parse_events_term__num’,
inlined from ‘parse_events_multi_pmu_add’ at util/parse-events.c:1602:6:
util/parse-events.c:2653:64: error: array subscript ‘YYLTYPE[0]’ is partly outside
array bounds of ‘char[8]’ [-Werror=array-bounds]
2653 | .err_term = loc_term ? loc_term->first_column : 0,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~
util/parse-events.c: In function ‘parse_events_multi_pmu_add’:
util/parse-events.c:1587:15: note: object ‘config’ of size 8
1587 | char *config;
| ^~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230331202949.810326-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Committer notes:
Added missing #include <unistd.h> for the close() prototype to fix this
on Alma Linux 8:
1 21.54 almalinux:8 : FAIL gcc version 8.5.0 20210514 (Red Hat 8.5.0-16) (GCC)
util/print-events.c: In function 'print_tracepoint_events':
util/print-events.c:103:4: error: implicit declaration of function 'close'; did you mean 'clone'? [-Werror=implicit-function-declaration]
close(evt_fd);
^~~~~
clone
Also use the newly added scandirat feature test to check if that
function is available, providing a HAVE_SCANDIRAT_SUPPORT conditional
warning to the user if it isn't available.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230331202949.810326-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use it just when listing tracepoint events, and for root, so just
emit a warning about it to get users to ask the library maintainers to
implement it, as suggested in this systemd ticket:
https://github.com/systemd/casync/issues/129
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZCwv4z5Dh%2FdHUMG6@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jetson AGX Orin has onboard RT5640 audio codec. This patch adds the
codec device node and the bindings to I2S1 interface.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The callers haven't used the returned node since
commit 21193dcd1f ("SELinux: more careful use of avd in
avc_has_perm_noaudit") and the return value assignments were removed in
commit 0a9876f36b ("selinux: Remove redundant assignments"). Stop
returning the node altogether and make the functions return void.
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
PM: minor subj tweak, repair whitespace damage
Signed-off-by: Paul Moore <paul@paul-moore.com>
In cases where the DSI module is left on by the bootloader
some panels may fail to initialize if the enable register is not cleared
before the panel's initialization sequence is sent, so clear it if that
is the case.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Return dev_err_probe() directly, because the return value of
dev_err_probe() is the appropriate error code, and it can
reduce code size, simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
A call to platform_get_irq() already prints an error on failure within
its own implementation. So printing another error based on its return
value in the caller is redundant and should be removed. The clean up
also makes if condition block braces unnecessary. Remove that as well.
Issue identified using platform_get_irq.cocci coccicheck script.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/tegra/dc.c: In function ‘tegra_crtc_calculate_memory_bandwidth’:
drivers/gpu/drm/tegra/dc.c:2384:38: warning: variable ‘old_state’ set but not used [-Wunused-but-set-variable]
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This compile tests on x86 just perfectly fine.
v2: fix missing include complained by kernel test robot
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Jonathan Hunter <jonathanh@nvidia.com>
CC: linux-tegra@vger.kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Code that passes a 32-bit constant into cmpxchg() produces a harmless
sparse warning because of the truncation in the branch that is not taken:
fs/erofs/zdata.c: note: in included file (through /home/arnd/arm-soc/arch/arm/include/asm/cmpxchg.h, /home/arnd/arm-soc/arch/arm/include/asm/atomic.h, /home/arnd/arm-soc/include/linux/atomic.h, ...):
include/asm-generic/cmpxchg-local.h:29:33: warning: cast truncates bits from constant value (5f0ecafe becomes fe)
include/asm-generic/cmpxchg-local.h:33:34: warning: cast truncates bits from constant value (5f0ecafe becomes cafe)
include/asm-generic/cmpxchg-local.h:29:33: warning: cast truncates bits from constant value (5f0ecafe becomes fe)
include/asm-generic/cmpxchg-local.h:30:42: warning: cast truncates bits from constant value (5f0edead becomes ad)
include/asm-generic/cmpxchg-local.h:33:34: warning: cast truncates bits from constant value (5f0ecafe becomes cafe)
include/asm-generic/cmpxchg-local.h:34:44: warning: cast truncates bits from constant value (5f0edead becomes dead)
This was reported as a regression to Matt's recent __generic_cmpxchg_local
patch, though this patch only added more warnings on top of the ones
that were already there.
Rewording the truncation to use an explicit bitmask instead of a cast
to a smaller type avoids the warning but otherwise leaves the code
unchanged.
I had another look at why the cast is even needed for atomic_cmpxchg(),
and as Matt describes the problem here is that atomic_t contains a
signed 'int', but cmpxchg() takes an 'unsigned long' argument, and
converting between the two leads to a 64-bit sign-extension of
negative 32-bit atomics.
I checked the other implementations of arch_cmpxchg() and did not find
any others that run into the same problem as __generic_cmpxchg_local(),
but it's easy to be on the safe side here and always convert the
signed int into an unsigned int when calling arch_cmpxchg(), as this
will work even when any of the arch_cmpxchg() implementations run
into the same problem.
Fixes: 6246541522 ("locking/atomic: cmpxchg: Make __generic_cmpxchg_local compare against zero-extended 'old' value")
Reviewed-by: Matt Evans <mev@rivosinc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Copy the forced type casts from the normal MMIO accessors to suppress
the sparse warnings that point out __raw_readl() returns a native endian
word (just like readl()).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit c1d55d5013 ("asm-generic/io.h: Fix sparse warnings on
big-endian architectures") missed fixing the 64-bit accessors.
Arnd explains in the attached link why the casts are necessary, even if
__raw_readq() and __raw_writeq() do not take endian-specific types.
Link: https://lore.kernel.org/lkml/9105d6fc-880b-4734-857d-e3d30b87ccf6@app.fastmail.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The existing pKVM code attempts to advertise CSV2/3 using values
initialized to 0, but never set. To advertise CSV2/3 to protected
guests, pass the CSV2/3 values to hyp when initializing hyp's
view of guests' ID_AA64PFR0_EL1.
Similar to non-protected KVM, these are system-wide, rather than
per cpu, for simplicity.
Fixes: 6c30bfb18d ("KVM: arm64: Add handlers for protected VM System Registers")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20230404152321.413064-1-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
There might be confusion about why pci_bus_for_each_resource() uses
Logical OR. Document the entire macro and explain how it works and why the
conditional needs to be like that.
Link: https://lore.kernel.org/r/20230330162434.35055-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Instead of open-coding it everywhere introduce a tiny helper that can be
used to iterate over each resource of a PCI device, and convert the most
obvious users into it.
While at it drop doubled empty line before pdev_sort_resources().
No functional changes intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230330162434.35055-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Introduce pci_resource_n() and replace open-coded implementations of it
in pci.h.
Link: https://lore.kernel.org/r/20230330162434.35055-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
After fixing the error handling in the .remove() callback of the qup
driver, convert it to .remove_new() preparing to make platform driver's
remove functions return void.
This commit creates an srcu_usage pointer named "sup" as a shorter
synonym for the "ssp->srcu_sup" that was bloating several lines of code.
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit creates an srcu_usage pointer named "sup" as a shorter
synonym for the "ssp->srcu_sup" that was bloating several lines of code.
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
