Having cache entries linked using the hlist format brings no benefit, and
also requires an unnecessary extra pointer address per cache entry.
Use the internal io_wq_work_node single-linked list for the internal
alloc caches (async_msghdr and async_poll)
This is required to be able to use KASAN on cache entries, since we do
not need to touch unused (and poisoned) cache entries when adding more
entries to the list.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230223164353.2839177-2-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Right now io_wq allocates one io_wqe per NUMA node. As io_wq is now
bound to a task, the task basically uses only the NUMA local io_wqe, and
almost never changes NUMA nodes, thus, the other wqes are mostly
unused.
Allocate just one io_wqe embedded into io_wq, and uses all possible cpus
(cpu_possible_mask) in the io_wqe->cpumask.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230310201107.4020580-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ring mapped provided buffer rings rely on the application allocating
the memory for the ring, and then the kernel will map it. This generally
works fine, but runs into issues on some architectures where we need
to be able to ensure that the kernel and application virtual address for
the ring play nicely together. This at least impacts architectures that
set SHM_COLOUR, but potentially also anyone setting SHMLBA.
To use this variant of ring provided buffers, the application need not
allocate any memory for the ring. Instead the kernel will do so, and
the allocation must subsequently call mmap(2) on the ring with the
offset set to:
IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT)
to get a virtual address for the buffer ring. Normally the application
would allocate a suitable piece of memory (and correctly aligned) and
simply pass that in via io_uring_buf_reg.ring_addr and the kernel would
map it.
Outside of the setup differences, the kernel allocate + user mapped
provided buffer ring works exactly the same.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for allowing flags to be set for registration, rename
the padding and use it for that.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than rely on checking buffer_list->buf_pages or ->buf_nr_pages,
add a separate member that tracks if this is a ring mapped provided
buffer list or not.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for allowing the kernel to allocate the provided buffer
rings and have the application mmap it instead, abstract out the
current method of pinning and mapping the user allocated ring.
No functional changes intended in this patch.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some architectures have memory cache aliasing requirements (e.g. parisc)
if memory is shared between userspace and kernel. This patch fixes the
kernel to return an aliased address when asked by userspace via mmap().
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring hashes writes to a given file/inode so that it can serialize
them. This is useful if the file system needs exclusive access to the
file to perform the write, as otherwise we end up with a ton of io-wq
threads trying to lock the inode at the same time. This can cause
excessive system time.
But if the file system has flagged that it supports parallel O_DIRECT
writes, then there's no need to serialize the writes. Check for that
through FMODE_DIO_PARALLEL_WRITE and don't hash it if we don't need to.
In a basic test of 8 threads writing to a file on XFS on a gen2 Optane,
with each thread writing in 4k chunks, it improves performance from
~1350K IOPS (or ~5290MiB/sec) to ~1410K IOPS (or ~5500MiB/sec).
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some filesystems support multiple threads writing to the same file with
O_DIRECT without requiring exclusive access to it. io_uring can use this
hint to avoid serializing dio writes to this inode, instead allowing them
to run in parallel.
XFS and ext4 both fall into this category, so set the flag for both of
them.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/display/intel_wm.c:46: warning: Function parameter or member 'i915' not described in 'intel_update_watermarks'
drivers/gpu/drm/i915/display/intel_wm.c:46: warning: Excess function parameter 'dev_priv' description in 'intel_update_watermarks'
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-20-lee@kernel.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/display/intel_display_power.c:712: warning: expecting prototype for intel_display_power_put_async(). Prototype was for __intel_display_power_put_async() instead
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-18-lee@kernel.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Function parameter or member 'intel_connector' not described in 'intel_connector_debugfs_add'
drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Excess function parameter 'connector' description in 'intel_connector_debugfs_add'
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-5-lee@kernel.org
The call netdev_{put, hold} of dev_{put, hold} will check NULL,
so there is no need to check before using dev_{put, hold},
remove it to silence the warnings:
./drivers/infiniband/core/cma.c:713:2-9: WARNING: NULL check before dev_{put, hold} functions is not needed.
./drivers/infiniband/core/cma.c:2433:2-9: WARNING: NULL check before dev_{put, hold} functions is not needed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4668
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230331010633.63261-1-yang.lee@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
clang with W=1 reports
drivers/infiniband/hw/qib/qib_file_ops.c:487:20: error: variable
'cnt' set but not used [-Werror,-Wunused-but-set-variable]
u32 tid, ctxttid, cnt, limit, tidcnt;
^
drivers/infiniband/hw/qib/qib_file_ops.c:1771:9: error: variable
'cnt' set but not used [-Werror,-Wunused-but-set-variable]
int i, cnt = 0, maxtid = ctxt_tidbase + dd->rcvtidcnt;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230330235800.1845815-1-trix@redhat.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
clang with W=1 reports
drivers/infiniband/hw/mlx5/devx.c:1996:6: error: variable
'num_alloc_xa_entries' set but not used [-Werror,-Wunused-but-set-variable]
int num_alloc_xa_entries = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230330153607.1838750-1-trix@redhat.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Move this common logic into iser_create_send_desc instead of duplicating
the code.
Reviewed-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20230330131333.37900-2-mgurtovoy@nvidia.com
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The removed macros are old leftovers.
Reviewed-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20230330131333.37900-1-mgurtovoy@nvidia.com
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The Sensor Processing Engine(SPE) can trigger a software wake-up of
the device. To support this wake-up for the SPE, set SR_CAPTURE_EN
bit in WAKE_AOWAKE_CNTRL register associated with the wake-up for
the SPE. This SR capturing logic is expected to be enabled for wakes
with short pulse signalling requirements.
Signed-off-by: Viswanath L <viswanathl@nvidia.com>
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the GPIO wake interrupt for MGBE ethernet controller on Tegra234 SoC.
Signed-off-by: Sushil Singh <sushilkumars@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
We don't populate drm_driver.gem_prime_import_sg_table so only
DMA-BUFs exported from our own device can be imported. We don't
populate drm_gem_object_funcs.get_sg_table so DMA-BUFs cannot be
imported into another device. Still, this is useful to user-space
to share buffers between processes and between API boundaries
(e.g. wlroots hard-requires PRIME import/export support).
v2: expand commit message
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302143502.500661-2-contact@emersion.fr
drm_gem_map_dma_buf() requires drm_gem_object_funcs.get_sg_table
to be implemented, or else WARNs.
Allow drivers to leave this hook unimplemented to implement purely
local DMA-BUFs (ie, DMA-BUFs which cannot be imported anywhere
else but the device which allocated them). In that case, reject
imports to other devices in drm_gem_map_attach().
v2: new patch
v3: use ENOSYS
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302143502.500661-1-contact@emersion.fr
Add the PMIC wake event for Tegra234 that is used to bring the device
out of system suspend for events such as an RTC alarm.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Within the error path, genpd->domains has not been set, so we need
to pass the domains variable to kfree instead.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
LT8912 DSI port supports only Non-Burst mode video operation with Sync
Events and continuous clock on clock lane, correct dsi mode flags
according to that removing MIPI_DSI_MODE_VIDEO_BURST flag.
Cc: <stable@vger.kernel.org>
Fixes: 30e2ae943c ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330093131.424828-1-francesco@dolcini.it
Some error paths in mrq_debug_read and bpmp_debug_show would overwrite
the return error code with a subsequent call to mrq_debug_close.
Change the code to only change the error code if there was no prior
error.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current state of the art for sparse register maps is the
rbtree cache. This works well for most applications but isn't
always ideal for sparser register maps since the rbtree can get
deep, requiring a lot of walking. Fortunately the kernel has a
data structure intended to address this very problem, the maple
tree. Provide an initial implementation of a register cache
based on the maple tree to start taking advantage of it.
The entries stored in the maple tree are arrays of register
values, with the maple tree keys holding the register addresses.
We store data in host native format rather than device native
format as we do for rbtree, this will be a benefit for devices
where we don't marshal data within regmap and simplifies the code
but will result in additional CPU overhead when syncing the cache
on devices where we do marshal data in regmap.
This should work well for a lot of devices, though there's some
additional areas that could be looked at such as caching the
last accessed entry like we do for rbtree and trying to minimise
the maple tree level locking. We should also use bulk writes
rather than single register writes when resyncing the cache where
possible, even if we don't store in device native format.
Very small register maps may continue to to better with rbtree
longer term.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230325-regcache-maple-v3-2-23e271f93dc7@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to support sparse caches that don't store data in raw format
factor out the parts of the raw block sync implementation that deal with
writing a single register via _regmap_write().
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230325-regcache-maple-v3-1-23e271f93dc7@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the USB interface "wireless_status" for the G935 receiver when
receiving battery notifications.
This will allow sound daemons such as Pipewire or PulseAudio to know
whether or not the headset is turned on and connected.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302105555.51417-6-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This adds the API that allows device specific drivers to tell user-space
about whether the wireless device is connected to its receiver dongle.
See "USB: core: Add wireless_status sysfs attribute" for a detailed
explanation of what this attribute should be used for.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230302105555.51417-5-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add a wireless_status sysfs attribute to USB devices to keep track of
whether a USB device that's comprised of a receiver dongle and an emitter
device over a, most of the time proprietary, wireless link has its emitter
connected or disconnected.
This will be used by user-space OS components to determine whether the
battery-powered part of the device is wirelessly connected or not,
allowing, for example:
- upower to hide the battery for devices where the device is turned off
but the receiver plugged in, rather than showing 0%, or other values
that could be confusing to users
- Pipewire to hide a headset from the list of possible inputs or outputs
or route audio appropriately if the headset is suddenly turned off, or
turned on
- libinput to determine whether a keyboard or mouse is present when its
receiver is plugged in.
This is done at the USB interface level as:
- the interface on which the wireless status is detected is sometimes
not the same as where it could be consumed (eg. the audio interface
on a headset dongle will still appear even if the headset is turned
off), and we cannot have synchronisation of status across subsystems.
- this behaviour is not specific to HID devices, even if the protocols
used to determine whether or not the remote device is connected can
be HID.
This is not an attribute that is meant to replace protocol specific
APIs, such as the ones available for WWAN, WLAN/Wi-Fi, or Bluetooth
or any other sort of networking, but solely for wireless devices with
an ad-hoc “lose it and your device is e-waste” receiver dongle.
The USB interface will only be exporting the wireless_status sysfs
attribute if it gets set through the API exported in the next commit.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230302105555.51417-4-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add the Logitech G935 headset that uses the HID++ protocol to the
list of supported devices.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302105555.51417-3-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Use the compiler to force a 100-length array, rather than check the
length after the fact.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302105555.51417-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Now that USB HID++ devices can gather a serial number that matches the
one that would be gathered when connected through a Unifying receiver,
remove the last difference by dropping the product ID as devices
usually have different product IDs when connected through USB or
Unifying.
For example, on the serials on a G903 wired/wireless mouse:
- Unifying before patch: 4067-e8-ce-cd-45
- USB before patch: c086-e8-ce-cd-45
- Unifying and USB after patch: e8-ce-cd-45
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302130117.3975-2-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
For devices that support the 0x0003 feature (Device Information) version 4,
set the serial based on the output of that feature, rather than relying
on the usbhid code setting the USB serial.
This should allow the serial when connected through USB to (nearly)
match the one when connected through a unifying receiver.
For example, on the serials on a G903 wired/wireless mouse:
- Unifying: 4067-e8-ce-cd-45
- USB before patch: 017C385C3837
- USB after patch: c086-e8-ce-cd-45
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302130117.3975-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Since the esdhc controller is sdhci compatible, the fsl-imx-esdhc.yaml
should ref sdhci-common.yaml to use 'sdhci-caps-mask' property.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230328060740.1984239-1-peng.fan@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There are many log messages scattered throughout the mt8186 sound
drivers, and they are frequently triggered.
To avoid spamming the console, move these messages to the debug level.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: https://lore.kernel.org/r/20230329080418.1100-1-allen-kh.cheng@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP SOF driver supports different audio configurations.
Explicit condition check for I2S configuration will break
other audio endpoint configurations.
acp_dai_probe() function is not required as we have
machine select logic to select the exact machine.
Remove acp_dai_probe() from existing AMD PCI driver code base.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During initial SOF driver bring up on AMD platforms, only DMIC
support was added. As of today, we have a complete SOF solution for
I2S endpoints along with DMIC endpoint.
This code is no longer required.
Remove unused code from RMB and RN platform ACP PCI driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230403071651.919027-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Maxim Integrated MAX98371 audio codec bindings to DT schema.
Signed-off-by: André Morishita <andremorishita@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230401181930.533067-1-andremorishita@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This model requires an additional detection quirk to enable the internal microphone.
Signed-off-by: Prajna Sariputra <putr4.s@gmail.com>
Link: https://lore.kernel.org/r/2283110.ElGaqSPkdT@n0067ax-linux62
Signed-off-by: Mark Brown <broonie@kernel.org>
The file named 'controls' in the DSP's debugfs root contains a
formatted table describing the controls defined within the loaded DSP
firmware, it is of the form
name: len region:offset addr fwname algid ctltype flags en dirty
Where flags is represented as a character for each flag if set, or '-',
enabled is whether the control is enabled or disabled and dirty is
whether the control value is set in the cache but not the hardware.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230328131018.6820-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original patch uses a feature in lib/vsprintf.c to handle the invalid
address when tring to print *_fw_module->man4_module_entry.name when the
*rc_fw_module is NULL.
This case is handled by check_pointer_msg() internally and turns the
invalid pointer to '(efault)' for printing but it is hiding useful
information about the circumstances. Change the print to emmit the name
of the widget and a note on which side's fw_module is missing.
Fixes: e3720f92e0 ("ASoC: SOF: avoid a NULL dereference with unsupported widgets")
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/alsa-devel/4826f662-42f0-4a82-ba32-8bf5f8a03256@kili.mountain/
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Rule: 'Cc: stable@vger.kernel.org' or 'commit <sha1> upstream.'
Link: https://lore.kernel.org/r/20230403090909.18233-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original check for non-null "user" object was introduced by commit
e11fea92e1 ("kmsg: export printk records to the /dev/kmsg interface")
when "user" could be NULL if /dev/ksmg was opened for writing.
Subsequent change 750afe7bab ("printk: add kernel parameter to control
writes to /dev/kmsg") made "user" context required for files opened for
write, but didn't remove now redundant checks for it to be non-NULL.
This patch removes the dead code while preserving the current logic.
Signed-off-by: Stanislav Kinsburskii <stanislav.kinsburski@gmail.com>
CC: Petr Mladek <pmladek@suse.com>
CC: Sergey Senozhatsky <senozhatsky@chromium.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: John Ogness <john.ogness@linutronix.de>
CC: linux-kernel@vger.kernel.org
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/167929571877.2810.9926967619100618792.stgit@skinsburskii.localdomain
