In order to handle emulation of prefixed instructions in the guest,
this first makes vcpu->arch.last_inst be an unsigned long, i.e. 64
bits on 64-bit platforms. For prefixed instructions, the upper 32
bits are used for the prefix and the lower 32 bits for the suffix, and
both halves are byte-swapped if the guest endianness differs from the
host.
Next, vcpu->arch.emul_inst is now 64 bits wide, to match the HEIR
register on POWER10. Like HEIR, for a prefixed instruction it is
defined to have the prefix is in the top 32 bits and the suffix in the
bottom 32 bits, with both halves in the correct byte order.
kvmppc_get_last_inst is extended on 64-bit machines to put the prefix
and suffix in the right places in the ppc_inst_t being returned.
kvmppc_load_last_inst now returns the instruction in an unsigned long
in the same format as vcpu->arch.last_inst. It makes the decision
about whether to fetch a suffix based on the SRR1_PREFIXED bit in the
MSR image stored in the vcpu struct, which generally comes from SRR1
or HSRR1 on an interrupt. This bit is defined in Power ISA v3.1B to
be set if the interrupt occurred due to a prefixed instruction and
cleared otherwise for all interrupts except for instruction storage
interrupt, which does not come to the hypervisor. It is set to zero
for asynchronous interrupts such as external interrupts. In previous
ISA versions it was always set to 0 for all interrupts except
instruction storage interrupt.
The code in book3s_hv_rmhandlers.S that loads the faulting instruction
on a HDSI is only used on POWER8 and therefore doesn't ever need to
load a suffix.
[npiggin@gmail.com - check that the is-prefixed bit in SRR1 matches the
type of instruction that was fetched.]
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/ZAgsq9h1CCzouQuV@cleo
This changes kvmppc_get_last_inst() so that the instruction it fetches
is returned in a ppc_inst_t variable rather than a u32. This will
allow us to return a 64-bit prefixed instruction on those 64-bit
machines that implement Power ISA v3.1 or later, such as POWER10.
On 32-bit platforms, ppc_inst_t is 32 bits wide, and is turned back
into a u32 by ppc_inst_val, which is an identity operation on those
platforms.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/ZAgsiPlL9O7KnlZZ@cleo
The usb4_port_sb_opcode_err_to_errno() converts from USB4 error codes
to the Linux errno space. In particular, this makes the intention
of the repeating usb4_port_retimer_read() call in the
usb4_port_retimer_nvm_authenticate_status() clearer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The Foxconn T99W510 device is designed based on Qualcomm
SDX24. Add 3 variants for different potential customer.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20230329072239.93632-1-slark_xiao@163.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
If the BHIOFF or BHIEOFF range checks fail, they return EINVAL. ERANGE
is a better error code since it implies an out of range condition.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1679674860-28229-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
If the value read from the CHDBOFF and ERDBOFF registers is outside the
range of the MHI register space then an invalid address might be computed
which later causes a kernel panic. Range check the read value to prevent
a crash due to bad data from the device.
Fixes: 6cd330ae76 ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/1679674384-27209-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Pass the hypervisor (H)SRR1[PREFIX] indication through to synchronous
interrupts injected into the guest.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230330103224.3589928-3-npiggin@gmail.com
The prefix architecture in ISA v3.1 introduces a prefixed bit in SRR1
for many types of synchronous interrupts which is set when the interrupt
is caused by a prefixed instruction.
This requires KVM to be able to set this bit when injecting interrupts
into a guest. Plumb through the SRR1 "flags" argument to the core_queue
APIs where it's missing for this. For now they are set to 0, which is
no change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fixup kvmppc_core_queue_alignment() in booke.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230330103224.3589928-2-npiggin@gmail.com
Fix various W=1 warnings in booke.c:
arch/powerpc/kvm/booke.c:1008:5: error: no previous prototype for ‘kvmppc_handle_exit’ [-Werror=missing-prototypes]
1008 | int kvmppc_handle_exit(struct kvm_vcpu *vcpu, unsigned int exit_nr)
| ^~~~~~~~~~~~~~~~~~
arch/powerpc/kvm/booke.c:1009: warning: Function parameter or member 'vcpu' not described in 'kvmppc_handle_exit'
arch/powerpc/kvm/booke.c:1009: warning: Function parameter or member 'exit_nr' not described in 'kvmppc_handle_exit'
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202304020827.3LEZ86WB-lkp@intel.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230403045314.3095410-1-mpe@ellerman.id.au
It is pointless and expensive to calculate data in the interrupt that
depends on the type of touchscreen, which is detected on the driver
probe and cannot then be changed.
So calculate the size of the data buffer on the driver probe, as well as
the data retrieval command, and then use them in the ISR.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-10-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
With this patch, the CRC is always verified by the same function, even in
the case of accessing registers where the number of bytes is minimal.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-9-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In some parts of the code, error messages were improperly printed with
dev_dbg() calls. In those cases, dev_dbg() has been replaced with
dev_err().
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The use of the macros M06_REG_ADDR and M06_REG_CMD avoids code
duplication without impacting the application load, and reduces the
chances of errors or mistakes.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a hard IRQ is triggered, the soft IRQ, which decides if an actual
pen down happened, should always be triggered. This enables the usage of
"can_sleep" GPIO chips as "pen down" GPIO, as the value is not read
during the hard IRQ anymore. This might be the case if the GPIO chip is
an expander behind i2c.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Link: https://lore.kernel.org/r/20230328-tsc2007-sleep-v5-1-fc55e76d0ced@skidata.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The required-opps configuration is closely tied to genpd and performance
states at the moment and it is not very obvious that required-opps can
live without genpds. Though we don't support configuring required-opps
for non-genpd cases currently.
This commit aims at separating these parts, where configuring genpds
would be a special case of configuring the required-opps.
Add a specialized callback, set_required_opps(), to the opp table and
set it to different callbacks accordingly.
This shouldn't result in any functional changes for now.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
There is no real need of keeping separate code for single genpd case, it
can be made to work with a simple change.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
When smb2_lock request is canceled by smb2_cancel or smb2_close(),
ksmbd is missing deleting async_request_entry async_requests list.
Because calling init_smb2_rsp_hdr() in smb2_lock() mark ->synchronous
as true and then it will not be deleted in
ksmbd_conn_try_dequeue_request(). This patch add release_async_work() to
release the ones allocated for async work.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
1. Add ovl_adaptor get_format and get_num_formats component function.
The two functions are needed for getting the supported format in
mtk_plane_init().
2. Get supported format from the ovl_adaptor's rdma engine - mdp_rdma.
Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230330032614.18837-3-nancy.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
John Garry <john.g.garry@oracle.com> says:
It's easy to get scsi_debug to error on throughput testing when we have
multiple shosts:
$ lsscsi
[7:0:0:0] disk Linux scsi_debug 0191
[0:0:0:0] disk Linux scsi_debug 0191
$ fio --filename=/dev/sda --filename=/dev/sdb --direct=1 --rw=read
--bs=4k --iodepth=256 --runtime=60 --numjobs=40 --time_based --name=jpg
--eta-newline=1 --readonly --ioengine=io_uring --hipri --exitall_on_error
jpg: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=io_uring, iodepth=256
...
fio-3.28
Starting 40 processes
[ 27.521809] hrtimer: interrupt took 33067 ns
[ 27.904660] sd 7:0:0:0: [sdb] tag#171 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
[ 27.904660] sd 0:0:0:0: [sda] tag#58 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
fio: io_u error [ 27.904667] sd 0:0:0:0: [sda] tag#58 CDB: Read(10) 28 00 00 00 27 00 00 01 18 00
on file /dev/sda[ 27.904670] sd 0:0:0:0: [sda] tag#62 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
The issue is related to how the driver manages submit queues and tags. A
single array of submit queues - sdebug_q_arr - with its own set of tags is
shared among all shosts. As such, for occasions when we have more than one
host it is possible to overload the submit queues and run out of tags.
Another separate issue that we may reduce the shost submit queue depth,
sdebug_max_queue, dynamically causing the shost to be overloaded. How many
IOs which the shost may be sent is fixed at can_queue at init time, which
is the same initial value for sdebug_max_queue. So reducing
sdebug_max_queue means that the shost may be sent more IOs than it is
configured to handle, causing overloading.
This series removes the scsi_debug submit queue concept and uses
pre-existing APIs to manage and examine tags, like scsi_block_requests()
and blk_mq_tagset_busy_iter(). Using standard APIs makes the driver more
maintainable and extensible in future.
A restriction is also added to allow sdebug_max_queue only be modified when
no shosts are present, i.e. we need to remove shosts, modify
sdebug_max_queue, and then re-add the shosts.
Link: https://lore.kernel.org/r/20230327074310.1862889-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It's easy to get scsi_debug to error on throughput testing when we have
multiple shosts:
$ lsscsi
[7:0:0:0] disk Linux scsi_debug 0191
[0:0:0:0] disk Linux scsi_debug 0191
$ fio --filename=/dev/sda --filename=/dev/sdb --direct=1 --rw=read --bs=4k
--iodepth=256 --runtime=60 --numjobs=40 --time_based --name=jpg
--eta-newline=1 --readonly --ioengine=io_uring --hipri --exitall_on_error
jpg: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=io_uring, iodepth=256
...
fio-3.28
Starting 40 processes
[ 27.521809] hrtimer: interrupt took 33067 ns
[ 27.904660] sd 7:0:0:0: [sdb] tag#171 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
[ 27.904660] sd 0:0:0:0: [sda] tag#58 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
fio: io_u error [ 27.904667] sd 0:0:0:0: [sda] tag#58 CDB: Read(10) 28 00 00 00 27 00 00 01 18 00
on file /dev/sda[ 27.904670] sd 0:0:0:0: [sda] tag#62 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
The issue is related to how the driver manages submit queues and tags. A
single array of submit queues - sdebug_q_arr - with its own set of tags is
shared among all shosts. As such, for occasions when we have more than one
shost it is possible to overload the submit queues and run out of tags.
The struct sdebug_queue is to manage tags and hold the associated
queued command entry pointer (for that tag).
Since the tagset iters are now used for functions like
sdebug_blk_mq_poll(), there is no need to manage these queues. Indeed,
blk-mq already provides what we need for managing tags and queues.
Drop sdebug_queue and all its usage in the driver.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-12-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The shost->can_queue value is initially used to set per-HW queue context
tag depth in the block layer. This ensures that the shost is not sent too
many commands which it can deal with. However lowering sdebug_max_queue
separately means that we can easily overload the shost, as in the following
example:
$ cat /sys/bus/pseudo/drivers/scsi_debug/max_queue
192
$ cat /sys/class/scsi_host/host0/can_queue
192
$ echo 100 > /sys/bus/pseudo/drivers/scsi_debug/max_queue
$ cat /sys/class/scsi_host/host0/can_queue
192
$ fio --filename=/dev/sda --direct=1 --rw=read --bs=4k --iodepth=256
--runtime=1200 --numjobs=10 --time_based --group_reporting
--name=iops-test-job --eta-newline=1 --readonly --ioengine=io_uring
--hipri --exitall_on_error
iops-test-job: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=io_uring, iodepth=256
...
fio-3.28
Starting 10 processes
[ 111.269885] scsi_io_completion_action: 400 callbacks suppressed
[ 111.269885] blk_print_req_error: 400 callbacks suppressed
[ 111.269889] I/O error, dev sda, sector 440 op 0x0:(READ) flags 0x1200000 phys_seg 1 prio class 2
[ 111.269892] sd 0:0:0:0: [sda] tag#132 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s
[ 111.269897] sd 0:0:0:0: [sda] tag#132 CDB: Read(10) 28 00 00 00 01 68 00 00 08 00
[ 111.277058] I/O error, dev sda, sector 360 op 0x0:(READ) flags 0x1200000 phys_seg 1 prio class 2
[...]
Ensure that this cannot happen by allowing sdebug_max_queue be modified
only when we have no shosts. As such, any shost->can_queue value will match
sdebug_max_queue, and sdebug_max_queue cannot be modified separately.
Since retired_max_queue is no longer set, remove support.
Continue to apply the restriction that sdebug_host_max_queue cannot be
modified when sdebug_host_max_queue is set. Adding support for that would
mean extra code, and no one has complained about this restriction
previously.
A command like the following may be used to remove a shost:
echo -1 > /sys/bus/pseudo/drivers/scsi_debug/add_host
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-11-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The functions to update ndelay and delay value first check whether we have
any in-flight IO for any host. It does this by checking if any tag is used
in the global submit queues.
We can achieve the same by setting the host as blocked and then ensuring
that we have no in-flight commands with scsi_host_busy().
Note that scsi_host_busy() checks SCMD_STATE_INFLIGHT flag, which is only
set per command after we ensure that the host is not blocked, i.e. we see
more commands active after the check for scsi_host_busy() returns 0.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-10-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of iterating all deferred commands in the submission queue
structures, use blk_mq_tagset_busy_iter(), which is a standard API for
this.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-9-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of iterating all deferred commands in the submission queue
structures, use blk_mq_tagset_busy_iter(), which is a standard API for
this.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-8-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Eventually we will drop the sdebug_queue struct as it is not really
required, so start with making the sdebug_queued_cmd dynamically allocated
for the lifetime of the scsi_cmnd in the driver.
As an interim measure, make sdebug_queued_cmd.sd_dp a pointer to struct
sdebug_defer. Also keep a value of the index allocated in
sdebug_queued_cmd.qc_arr in struct sdebug_queued_cmd.
To deal with an races in accessing the scsi cmnd allocated struct
sdebug_queued_cmd, add a spinlock for the scsi command in its priv area.
Races may be between scheduling a command for completion, aborting a
command, and the command actually completing and freeing the struct
sdebug_queued_cmd.
[mkp: typo fix]
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-7-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The feature to block queues is quite dubious, since it races with in-flight
IO. Indeed, it seems unnecessary for block queues for any times we do so.
Anyway, to keep the same behaviour, use standard SCSI API to stop IO being
sent - scsi_{un}block_requests().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-6-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no reason that calls to block_unblock_all_queues() from different
context can't race with one another, so protect with the
sdebug_host_list_mutex. There's no need for a more fine-grained per shost
locking here (and we don't have a per-host lock anyway).
Also simplify some touched code in sdebug_change_qdepth().
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-5-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The shost list lock, sdebug_host_list_lock, is a spinlock. We would only
lock in non-atomic context in this driver, so use a mutex instead, which is
friendlier if we need to schedule when iterating.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-4-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In clear_luns_changed_on_target(), we iter all devices for all shosts to
conditionally clear the SDEBUG_UA_LUNS_CHANGED flag in the per-device
uas_bm.
One condition to see whether we clear the flag is to test whether the host
for the device under consideration is the same as the matching device's
(devip) host. This check will only ever pass for devices for the same
shost, so only iter the devices for the matching device shost.
We can now drop the spinlock'ing of the sdebug_host_list_lock in the same
function. This will allow us to use a mutex instead of the spinlock for the
global shost lock, as clear_luns_changed_on_target() could be called in
non-blocking context, in scsi_debug_queuecommand() -> make_ua() ->
clear_luns_changed_on_target() (which is why required a spinlock).
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-3-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a report that the blktests scsi/004 test for "TASK SET FULL" (TSF)
now fails.
The condition upon we should issue this TSF is when the sdev queue is
full. The check for a full queue has an off-by-1 error. Previously we would
increment the number of requests in the queue after testing if the queue
would be full, i.e. test if one less than full. Since we now use
scsi_device_busy() to count the number of requests in the queue, this would
already account for the current request, so fix the test for queue full
accordingly.
Fixes: 151f0ec9dd ("scsi: scsi_debug: Drop sdebug_dev_info.num_in_q")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202303201334.18b30edc-oliver.sang@intel.com
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230327074310.1862889-2-john.g.garry@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
chenxiang <chenxiang66@hisilicon.com> says:
This series contain some fixes including:
- Grab sas_dev lock when traversing sas_dev list to avoid NULL
pointer
- Handle NCQ error when IPTT is valid
- Ensure all enabled PHYs up during controller reset
- Exit suspend state when usage count of runtime PM is greater than 0
https://lore.kernel.org/r/1679283265-115066-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the current status of the host controller is suspended, enabling a
local PHY just after disabling all local PHYs in expander environment, a
hang as follows occurs:
[ 486.854655] INFO: task kworker/u256:1:899 blocked for more than 120 seconds.
[ 486.862207] Not tainted 6.1.0-rc4+ #1
[ 486.870545] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 486.878893] task:kworker/u256:1 state:D stack:0 pid:899 ppid:2 flags:0x00000008
[ 486.887745] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [libsas]
[ 486.894704] Call trace:
[ 486.897400] __switch_to+0xf0/0x170
[ 486.901146] __schedule+0x3e4/0x1160
[ 486.904970] schedule+0x64/0x104
[ 486.908442] rpm_resume+0x158/0x6a0
[ 486.912163] __pm_runtime_resume+0x5c/0x84
[ 486.916489] smp_execute_task_sg+0x1f8/0x264 [libsas]
[ 486.921773] sas_discover_expander.part.0+0xbc/0x720 [libsas]
[ 486.927750] sas_discover_root_expander+0x90/0x154 [libsas]
[ 486.933552] sas_discover_domain+0x444/0x6d0 [libsas]
[ 486.938826] process_one_work+0x1e0/0x450
[ 486.943057] worker_thread+0x150/0x44c
[ 486.947015] kthread+0x114/0x120
[ 486.950447] ret_from_fork+0x10/0x20
[ 486.954292] INFO: task kworker/u256:2:1780 blocked for more than 120 seconds.
[ 486.961637] Not tainted 6.1.0-rc4+ #1
[ 486.966087] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 486.974356] task:kworker/u256:2 state:D stack:0 pid:1780 ppid:2 flags:0x00000208
[ 486.983141] Workqueue: 0000:74:02.0_event_q sas_port_event_worker [libsas]
[ 486.990252] Call trace:
[ 486.992930] __switch_to+0xf0/0x170
[ 486.996645] __schedule+0x3e4/0x1160
[ 487.000439] schedule+0x64/0x104
[ 487.003886] schedule_timeout+0x17c/0x1c0
[ 487.008102] wait_for_completion+0x7c/0x160
[ 487.012488] __flush_workqueue+0x104/0x3e0
[ 487.016782] sas_porte_bytes_dmaed+0x414/0x454 [libsas]
[ 487.022203] sas_port_event_worker+0x38/0x60 [libsas]
[ 487.027449] process_one_work+0x1e0/0x450
[ 487.031645] worker_thread+0x150/0x44c
[ 487.035594] kthread+0x114/0x120
[ 487.039017] ret_from_fork+0x10/0x20
[ 487.042828] INFO: task bash:11488 blocked for more than 121 seconds.
[ 487.049366] Not tainted 6.1.0-rc4+ #1
[ 487.053746] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 487.061953] task:bash state:D stack:0 pid:11488 ppid:10977 flags:0x00000204
[ 487.070698] Call trace:
[ 487.073355] __switch_to+0xf0/0x170
[ 487.077050] __schedule+0x3e4/0x1160
[ 487.080833] schedule+0x64/0x104
[ 487.084270] schedule_timeout+0x17c/0x1c0
[ 487.088474] wait_for_completion+0x7c/0x160
[ 487.092851] __flush_workqueue+0x104/0x3e0
[ 487.097137] drain_workqueue+0xb8/0x160
[ 487.101159] __sas_drain_work+0x50/0x90 [libsas]
[ 487.105963] sas_suspend_ha+0x64/0xd4 [libsas]
[ 487.110590] suspend_v3_hw+0x198/0x1e8 [hisi_sas_v3_hw]
[ 487.115989] pci_pm_runtime_suspend+0x5c/0x1d0
[ 487.120606] __rpm_callback+0x50/0x150
[ 487.124535] rpm_callback+0x74/0x80
[ 487.128204] rpm_suspend+0x110/0x640
[ 487.131955] rpm_idle+0x1f4/0x2d0
[ 487.135447] __pm_runtime_idle+0x58/0x94
[ 487.139538] queue_phy_enable+0xcc/0xf0 [libsas]
[ 487.144330] store_sas_phy_enable+0x74/0x100
[ 487.148770] dev_attr_store+0x20/0x34
[ 487.152606] sysfs_kf_write+0x4c/0x5c
[ 487.156437] kernfs_fop_write_iter+0x120/0x1b0
[ 487.161049] vfs_write+0x2d0/0x36c
[ 487.164625] ksys_write+0x70/0x100
[ 487.168194] __arm64_sys_write+0x24/0x30
[ 487.172280] invoke_syscall+0x50/0x120
[ 487.176186] el0_svc_common.constprop.0+0x168/0x190
[ 487.181214] do_el0_svc+0x34/0xc0
[ 487.184680] el0_svc+0x2c/0xb4
[ 487.187879] el0t_64_sync_handler+0xb8/0xbc
[ 487.192205] el0t_64_sync+0x19c/0x1a0
We find that when all local PHYs are disabled, all the devices will be
removed, the ->runtime_suspend() callback suspend_v3_hw() directly execute
since the controller usage count drop to 0. On the other side, the first
local PHY is enabled through the sysfs interface, and ensures that function
phy_up_v3_hw() is completed due to suspend_v3_hw()->
interrupt_disable_v3_hw(). In the expander scenario,
sas_discover_root_expander() is executed in event work
DISCE_DISCOVER_DOMAIN, which will increases the controller usage count and
carry out a resume and sends SMPIO, it cannot be completed because the
runtime PM status of the controller is RPM_SUSPENDING. At the same time,
the ->runtime_suspend() callback suspend_v3_hw() also cannot complete the
process because of drain libsas event queue in sas_suspend_ha(), so hung
occurs.
(thread 1) | (thread 2)
... |
rpm_idle() |
... |
__update_runtime_status(RPM_SUSPENDING)|
... | ...
suspend_v3_hw() | smp_execute_task_sg()
... | ...
interrupt_disable_v3_hw() | pm_runtime_get_sync()
| ...
... | rpm_resume() //RPM_SUSPENDING
|
__sas_drain_work() |
To fix this, check if the current runtime PM status of the controller
allows to be suspended continue after interrupt_disable_v3_hw(), return
immediately if not.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hislicon.com>
Link: https://lore.kernel.org/r/1679283265-115066-5-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For the controller reset operation, hisi_sas_phy_enable() is executed for
each enabled local PHY, and refresh the port id of each device based on the
latest hisi_sas_phy->port_id after 1 second sleep, hisi_sas_phy->port_id is
configured in the interrupt processing function phy_up_v3_hw(). However, in
directly attached scenario, for some SATA disks the amount of time for
phyup more than 1s sometimes. In this case, incorrect port id may be
configured in hisi_sas_refresh_port_id(). As a result, all the internal
IOs fail and disk lost, such as follows:
[10717.666565] hisi_sas_v3_hw 0000:74:02.0: phyup: phy1 link_rate=10(sata)
[10718.826813] hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=63
task=00000000c1ab1c2b dev id=200 addr=5000000000000501 CQ hdr: 0x8000007 0xc8003f 0x0
0x0 Error info: 0x0 0x0 0x0 0x0
[10718.843428] sas: TMF task open reject failed 5000000000000501
[10718.849242] hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=64
task=00000000c1ab1c2b dev id=200 addr=5000000000000501 CQ hdr: 0x8000007 0xc80040 0x0
0x0 Error info: 0x0 0x0 0x0 0x0
[10718.865856] sas: TMF task open reject failed 5000000000000501
[10718.871670] hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=65
task=00000000c1ab1c2b dev id=200 addr=5000000000000501 CQ hdr: 0x8000007 0xc80041 0x0
0x0 Error info: 0x0 0x0 0x0 0x0
[10718.888284] sas: TMF task open reject failed 5000000000000501
[10718.894093] sas: executing TMF for 5000000000000501 failed after 3 attempts!
[10718.901114] hisi_sas_v3_hw 0000:74:02.0: ata disk 5000000000000501 reset failed
[10718.908410] hisi_sas_v3_hw 0000:74:02.0: controller reset complete
.....
[10773.298633] ata216.00: revalidation failed (errno=-19)
[10773.303753] ata216.00: disable device
So the time of waitting for PHYs up is 1s which may be not enough. To solve
the issue, running hisi_sas_phy_enable() in parallel through async
operations and use wait_for_completion_timeout() to wait for PHYs come up
instead of directly sleep for 1 second.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1679283265-115066-4-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an NCQ error occurs when the IPTT is valid and slot->abort flag is set
in completion path, sas_task_abort() will be called to abort only one NCQ
command now, and the host would be set to SHOST_RECOVERY state. But this
may not kick-off EH Immediately until other outstanding QCs timeouts. As a
result, the host may remain in the SHOST_RECOVERY state for up to 30
seconds, such as follows:
[7972317.645234] hisi_sas_v3_hw 0000:74:04.0: erroneous completion iptt=3264 task=00000000466116b8 dev id=2 sas_addr=0x5000000000000502 CQ hdr: 0x1883 0x20cc0 0x40000 0x20420000 Error info: 0x0 0x0 0x200000 0x0
[7972341.508264] sas: Enter sas_scsi_recover_host busy: 32 failed: 32
[7972341.984731] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 32 tries: 1
All NCQ commands that are in the queue should be aborted when an NCQ error
occurs in this scenario.
Fixes: 05d91b557a ("scsi: hisi_sas: Directly trigger SCSI error handling for completion errors")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1679283265-115066-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clang with W=1 reports:
drivers/scsi/qla4xxx/ql4_isr.c:475:11: error: variable
'count' set but not used [-Werror,-Wunused-but-set-variable]
uint32_t count = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230331175757.1860780-1-trix@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clang with W=1 reports:
drivers/scsi/snic/snic_scsi.c:490:6: error: variable
'xfer_len' set but not used [-Werror,-Wunused-but-set-variable]
u64 xfer_len = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230328001647.1778448-1-trix@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clang with W=1 reports:
drivers/scsi/qedf/qedf_main.c:2227:6: error: variable
'num_handled' set but not used [-Werror,-Wunused-but-set-variable]
int num_handled = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230330203444.1842425-1-trix@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The validity of sock should be checked before assignment to avoid incorrect
values. Commit 57569c37f0 ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref
while calling getpeername()") introduced this change which may lead to
inconsistent values of tcp_sw_conn->sendpage and conn->datadgst_en.
Fix the issue by moving the position of the assignment.
Fixes: 57569c37f0 ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()")
Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com>
Link: https://lore.kernel.org/r/20230329071739.2175268-1-zhongjinghua@huaweicloud.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a memory leak reported by kmemleak:
unreferenced object 0xffffc900003f0000 (size 12288):
comm "modprobe", pid 19117, jiffies 4299751452 (age 42490.264s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000629261a8>] __vmalloc_node_range+0xe56/0x1110
[<0000000001906886>] __vmalloc_node+0xbd/0x150
[<000000005bb4dc34>] vmalloc+0x25/0x30
[<00000000a2dc1194>] qla2x00_create_host+0x7a0/0xe30 [qla2xxx]
[<0000000062b14b47>] qla2x00_probe_one+0x2eb8/0xd160 [qla2xxx]
[<00000000641ccc04>] local_pci_probe+0xeb/0x1a0
The root cause is traced to an error-handling path in qla2x00_probe_one()
when the adapter "base_vha" initialize failed. The fab_scan_rp "scan.l" is
used to record the port information and it is allocated in
qla2x00_create_host(). However, it is not released in the error handling
path "probe_failed".
Fix this by freeing the memory of "scan.l" when an error occurs in the
adapter initialization process.
Fixes: a4239945b8 ("scsi: qla2xxx: Add switch command to simplify fabric discovery")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230325110004.363898-1-lizetao1@huawei.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
clang with W=1 reports:
drivers/scsi/scsi_transport_fc.c:908:6: error: variable
'desc_cnt' set but not used [-Werror,-Wunused-but-set-variable]
u32 desc_cnt = 0, bytes_remain;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230326003222.1343671-1-trix@redhat.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simplify the sr_open() by removing the goto label as the function only
returns one error code.
Signed-off-by: Enze Li <lienze@kylinos.cn>
Link: https://lore.kernel.org/r/20230327030237.3407253-1-lienze@kylinos.cn
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
