On the theory that it's better to make a start let's add some KUnit tests
for regmap. Currently this is a bit of a mess but it passes and hopefully
will at some point help catch problems. We provide very basic cover for
most of the core functionality that operates at the register level,
repeating each test for each cache type in order to exercise the caches.
There is no coverage of anything to do with the bulk operations at the bus
level or formatting for byte stream buses yet.
Each test creates it's own regmap since the cache structures are built
incrementally, meaning we gain coverage from the different access
patterns, and some of the tests cover different init scenarios.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-regmap-kunit-v2-2-b208801dc2c8@kernel.org
Add a register map that is a simple array of memory, for use in
KUnit testing of the framework. This is not exposed in regmap.h
since I can't think of a non-test use case, it is purely for use
internally. To facilitate testing we track if registers have been
read or written to.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230324-regmap-kunit-v2-1-b208801dc2c8@kernel.org
The RX macro codec comes on some platforms in two variants - ADSP
and ADSP bypassed - thus the clock-names varies from 3 to 5. The clocks
must vary as well:
sc7280-idp.dtb: codec@3200000: clocks: [[202, 8], [202, 7], [203]] is too short
Fixes: 852fda58d9 ("ASoC: qcom: dt-bindings: Update bindings for clocks in lpass digital codes")
Cc: <stable@vger.kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230330071333.24308-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The phone has a Goodix GT1158 touchscreen, add a DT node for it.
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20230328073309.1743112-3-javierm@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The phone's display is using a Hannstar LCD panel. Support it by adding a
panel DT node and all needed nodes (backlight, MIPI DSI, regulators, etc).
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20230328073309.1743112-2-javierm@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When given patches that only touch documentation directory for LED
devices (Documentation/leds/), get_maintainer doesn't list mailing list
for LED subsystem. However, the patch should be seen on that list in order
to be applied.
Add the entry for Documentation/leds/.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230319084604.19749-1-bagasdotme@gmail.com
This function can be invoked for both MLO and non-MLO, so
it must deal with multi-link correctly. Notable, on auth
timeout, we'd otherwise get a warning due to the erroneous
deflink usage in MLO cases.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.b85f6052d51a.Iedfef4b4c4f3ca557aebc0093fdc3f5cfb49b507@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The link management queues associated with the broadcast stations
were forgotten and so the same queue was used with both broadcast
stations. This leads to lost frames and warnings on cleanup and
HW restart.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.0671fa976832.Id5aa9856fd5984e447f247e6d0c3979d9794a21a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the MLD code, we free probe_resp_data before we remove
the MAC from the firmware, so we might receive another one
from the device after freeing, and thus might leak it. Fix
that by moving the free later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.152b1715fc13.Ibd37fed1b24cd25012923ad9170d1fe33ab35c5c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This field is used only for host TLC, so it can reside inside
the corresponding lq_sta struct. Also, TLC lq_sta is cleared
in iwl_mvm_rs_rate_init() upon association, but max_agg_bufsize
is set earlier in iwl_mvm_sta_init(). Thus, place this field
in the persistent part of lq_sta to retain its value.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.d55361064e39.Ib79d30f27d94607d097f0192af2aacd455a17958@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
By using the internal station add the station is installed in
firmware with zeroed MAC addresses, which is wrong. Use the
full installation function instead, to fill all data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100040.62d5371bb3c7.Ie25b62125a3a022f76a36bae5fed9796c18698aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we remove the station, we call iwl_mvm_sta_del() which
returns true if we cannot remove it from the firmware yet,
which happens if this is the station ID for the AP station
that's still used because the MAC is still associated.
However, we still must free the link data as the station is
only kept alive in the firmware, in mac80211 and driver the
data structures are destroyed.
To fix that, we need to make iwl_mvm_mld_free_sta_link()
track whether or not the station is still alive in FW, as
otherwise we might reuse the station ID in the meantime and
iwl_mvm_mld_rm_sta_from_fw() would reject the later delete
from the firmware. Add an argument to it for that. Then we
can use the return value of iwl_mvm_sta_del() for that to
fix the issue, and call iwl_mvm_mld_rm_sta_from_fw() only
if we need to not keep the station in FW.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.1d81d4c71f35.I8fc60ac28ffc1147e9b1250e5e6237b3cb5516ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use the new macros from mac80211 that do lockdep checking
on the RCU dereferences, instead of hard-coding 1 as the
argument to rcu_dereference_protected().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.112df5c8dec2.I1a1008f5566e509953d988f254d15c9e58630418@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During link switching there might be a link that's marked
active but has no chanctx assigned (so it's not active from
our driver's POV), skip such links in power recalculation
without any warning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c629090bd5d2.If7a680d5e349d454f2122f936c21522b9528a55f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we change only idle, avoid sending the MAC context
command since it doesn't depend on idle state. This
also fixes an issue with the firmware because without
this we send the command during link switching, as we
just deactivated the first link, and we cannot send
this command when there's no active link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.f5218f8453ec.I1325ff14ec07a27dd7ea2c1c210a1721d969839f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we remove the AP station, we iterate over the links
and remove all the keys, however, the key iteration will
return all keys for all links, so skip the ones that we
don't need based on the link ID.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.e724878f502e.I66870d4629244b4b309be79e11cbbd384bdf93be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a fw_id_to_link_sta array in mvm to track the link
STA for each firmware station ID, and then use that to
report the link a frame was received on (since we know
the station ID from firmware).
Notably, this fixes beacon tracking for the correct link
since mac80211 now queues and processes those on the one
link identified by the link ID only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c7dd3ec18077.I12ef9eb4a5b8b5c2b9d6bcaa1fda73b59eba39d8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For management frames sent by an AP interface, translate
the MLD addresses to LINK addresses (for an MLD AP).
AP (non-bufferable) management frames are sent via
the broadcast station so the translation cannot be
done by the firmware.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.3cb4292f51e8.Ia662c00ff271c70eda927c12ed49b045b1eb8489@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add/removed from iwl driver and firmware station links.
Update the station queues accordingly (which station links
are connected to the station queues).
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.156d1aae5de1.I32973141be1190222169879f8caf7038c1a8f769@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace the deflink.addr with the proper link address
for setting the peer_link_address in the station command.
For a non-MLD station, it will be the deflink.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.03ab287da0ae.I88fb5ab4e3ea9c886a3fac7ce09c4791469c3c8e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It has to be done per link. We still don't support keys
configuration for several links, but the single vif link can
still point to a link different from deflink. For now handle
the removal of keys for the default link.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.19d729cc4654.I4ebe8e3eb5fc00a994761f7c0ad40107382705ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We're hitting these while starting to enable MLO in the
driver, but getting them each and every time isn't very
useful one way or the other. Make these warnings trigger
only once.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.f333741d3dcf.If063d4cfe8a583f0f980a1b0ae4e63e17ba4ddc9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Iterate all the links here and check which ones are active,
then adjust them accordingly.
This is still wrong as far as the RSSI event is concerned
(calling iwl_mvm_bt_coex_enable_rssi_event) since we call
that now multiple times, which could overwrite the data;
we need to either make that per link or call it only once,
but need to sort out first what the firmware will be doing
for beacon filtering/beacon abort in MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.fe813fd8de5d.I216236717876510e51e4c21c7fac7691925443f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is more of a workaround, with MLO we can get here with
the deflink not assigned. It's not critical right now that
we have this right, so WARN_ON_ONCE() and don't crash until
we can fix this area of the code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.2b0d31bdb60b.I39d23c76eec16ac49f6ae3a6d5f7652041bde855@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For now we only support a single link, so just use the
deflink's address for the link address, instead of the
STA's (MLD) address, but use the link address anyway
in order to facilitate MLO connections.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.c853c8ced3ba.I2e1915d1090c526e6a4c718440b45a7192bbbb03@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With newer MLD firmware API we no longer need beacon timing
information from the host, so disable TIMING_BEACON_ONLY.
If MLO is enabled (currently only for testing), then we must
not have DEAUTH_NEED_MGD_TX_PREP because mac80211 doesn't
support it yet, we'll have to fix that later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230329100039.28ec631487bf.I6eb27c3d4c0289a5ec3682f573aae3424f45619f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement the link change ops for links and stations.
Note that the stations one is empty for now as we only
have support for a single link so far, and then the
stations are created with the first link as deflink by
mac80211, so right now we don't really need anything.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.6186c5a37e99.Ifd00d3ee93356ddef273aa18f1e081cd8f2c84ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
vif->bss_conf is used in this function only when TLC is not offloaded,
so not in MLO flow. Simplify the related "if" condition and call
iwl_mvm_hwrate_to_tx_status() only for driver rate scale.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.c6826d5b5477.Ib56ec6025c0da3a381aaf88e71085ce9b96a9e65@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Driver uses link_id as an index in the array. FW currently can
support only 2 concurrently active links per vif with the ids in the
range 0-3. Add a mapping of dirver link ids to fw link id and track the
number of active link ids.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.a53e5df49c33.I02b25648d2d5ca370c0697bf19d0d34724eae8a1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
