Remove driver dma mapping and unmapping of pages. Let the
page_pool api do it.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This patch removes the internal rx page_cache and uses the generic
page_pool api only. It used to be that the page_pool couldn't handle all
the mlx5 driver usecases, but with the introduction of skb recycling and
page fragmentaton in the page_pool full switch can now be made. Some
benfits of this transition:
* Better page recycling in the cases when the page_cache was suffering
from head of queue blocking. The page_pool doesn't have this issue.
* DMA mapping/unmapping can be managed by the page_pool.
* mlx5e_rq size reduced by more than 50% due to the page_cache array
being deleted.
This patch only removes the page_cache. Downstream patches will enable
the required page_pool features and will add further fine-tuning.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Save allocated SHAMPO header pages to an array to which the
mlx5e_dma_info page will point to.
This change is a preparation for introducing mlx5e_frag_page structure
in a downstream patch. There's no new functionality introduced.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This change removes the usage of mlx5e_alloc_unit union for
striding rq. The change is more straightforward than legacy rq as
the alloc units union is already in place.
This patch only moves things around: instead of an array of unions make
it a union of arrays. This has the effect that each mlx5e_mpw_info will
allocate the largest possible size of the array member. For xsk this
means that the array of xdp_buff pointers for the wqe will still be
contiguous, but there will be some extra unused bytes at the end of the
array.
As further patch in the series will add the mlx5e_frag_page struct for
which the described size constraint will no longer hold.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The mlx5e_alloc_unit union is conveniently used to store arrays of
pointers to struct page or struct xdp_buff (for xsk). The union is
currently expected to have the size of a pointer for xsk batch
allocations to work. This is conveniet for the current state of the
code but makes it impossible to add a structure of a different size
to the alloc unit.
A further patch in the series will add the mlx5e_frag_page struct for
which the described size constraint will no longer hold.
This change removes the usage of mlx5e_alloc_unit union for legacy rq:
- A union of arrays is introduced (mlx5e_alloc_units) to replace the
array of unions to allow structures of different sizes.
- Each fragment has a pointer to a unit in the mlx5e_alloc_units array.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Change internal page cache and page pool api to use a struct page **
instead of a mlx5e_alloc_unit *.
This is the first change in a series which is meant to remove the
mlx5e_alloc_unit altogether.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We had all of the internal driver APIs, but not the all important
userspace uABI, in the dma-buf doc. Fix that. And re-arrange the
comments slightly as otherwise the comments for the ioctl nr defines
would not show up.
v2: Fix docs build warning coming from newly including the uabi header
in the docs build
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Add a way to set a deadline on remaining resv fences according to the
requested usage.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Propagate the deadline to all the fences in the chain.
v2: Use dma_fence_chain_contained [Tvrtko]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
This commit brings the rcu_torture_read event trace into line with
the new trace tools by replacing this event trace's __field() with the
corresponding __array(). Without this commit, the new trace tools will
fail when presented wtih an rcu_torture_read event trace, which is a
regression from the viewpoint of trace tools users.
https://lore.kernel.org/all/20230320133650.5388a05e@gandalf.local.home/
-----BEGIN PGP SIGNATURE-----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=3b8C
-----END PGP SIGNATURE-----
Merge tag 'urgent-rcu.2023.03.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This brings the rcu_torture_read event trace into line with the new
trace tools by replacing this event trace's __field() with the
corresponding __array().
Without this, the new trace tools will fail when presented wtih an
rcu_torture_read event trace, which is a regression from the viewpoint
of trace tools users"
Link: https://lore.kernel.org/all/20230320133650.5388a05e@gandalf.local.home/
* tag 'urgent-rcu.2023.03.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu: Fix rcu_torture_read ftrace event
This Kselftest fixes update for Linux 6.3-rc5 consists of one single
fix for sigaltstack test -Wuninitialized warning found when building
with clang.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmQjEZsACgkQCwJExA0N
Qxzgeg//RJZvZr1iqQ0w+C21e4BRzMMPjQEwAbKEoN9opiRx4nzMdSoJKxl3x66S
NTSaAST89plIaJGpHAbqC59SVWsUwBY9XdrknNV7PAwIBx4yHeQ8JlpIOK6dXoYV
tyGQxKvOQOtKP+Ou8iGKP9yv81dZylrcCVDrWG34xfZRqo3FIL6cs/U3DiGF+k8D
ofLKaqqENdOJtXzE6aIk4hJK7I60EvMealwF22KLnOKaNl8Lh6zWCRzf6BAV7eYY
8NO8sg4nAjszDF3HBkgxN7ON3c8Ei8Rn8DMfh5nhV6ni0wkwkd6uabcVaewixvJ2
qbVVRuBRECUqvJ1AwYizmXszizDEPTrl/1F8EpTmwe3rXd61WazN9eEXUW3chCeu
bQJaBzKYVemy/d+JEEYwgHHg9kM7V80wlZE9lnPtocZp4agkkvKqInGBeaTSbyuX
sEeYk1QPDBQ5kVqjzydm6eNqkG4l4g0o8GJHfKy0cO98vYt/IcJirMpP6iXI7aNt
Z+VZsD8lIMoiLJ/mk1+uJqUvj8Er/BePwoaSgQDa8HEjtYC0umrpPtSErLb43cDO
f8pWVLdaSF55lD+O4JC5QJcjPj1xQkHlo6J4B3vWPC2rHZX8VBfpFxuhBobOUO3S
M1nDO+iODepDTxY/mm4p7lSct3a7oOoGxjj7lFUCG3DLHwqRiLg=
=cSRs
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"One single fix for sigaltstack test -Wuninitialized warning found when
building with clang"
* tag 'linux-kselftest-fixes-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: sigaltstack: fix -Wuninitialized
Currently the asm constraints for __get_mem_asm() mark the value
register as an earlyclobber operand. This means that the compiler can't
reuse the same register for both the address and value, even when the
value is not subsequently used.
There's no need for the value register to be marked as earlyclobber, as
it's only written to after the address register is consumed, even when
the access faults.
Remove the unnecessary earlyclobber.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230314153700.787701-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently the asm constraints for __put_mem_asm() require that the value
is placed in a "real" GPR (i.e. one other than [XW]ZR or SP). This means
that for cases such as:
__put_user(0, addr)
... the compiler has to move '0' into "real" GPR, e.g.
mov xN, #0
sttr xN, [<addr>]
This is unfortunate, as using the zero register would require fewer
instructions and save a "real" GPR for other usage, allowing the
compiler to generate:
sttr xzr, [<addr>]
Modify the asm constaints for __put_mem_asm() to permit the use of the
zero register for the value.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230314153700.787701-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently the asm constraints for __smp_store_release() require that the
value is placed in a "real" GPR (i.e. one other than [XW]ZR or SP).
This means that for cases such as:
__smp_store_release(ptr, 0)
... the compiler has to move '0' into "real" GPR, e.g.
mov xN, #0
stlr xN, [<addr>]
This is unfortunate, as using the zero register would require fewer
instructions and save a "real" GPR for other usage, allowing the
compiler to generate:
stlr xzr, [<addr>]
Modify the asm constaints for __smp_store_release() to permit the use of
the zero register for the value.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230314153700.787701-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
For historical reasons, the LSE implementation of cmpxchg*() hard-codes
the GPRs to use, and shuffles registers around with MOVs. This is no
longer necessary, and can be simplified.
When the LSE cmpxchg implementation was added in commit:
c342f78217 ("arm64: cmpxchg: patch in lse instructions when supported by the CPU")
... the LL/SC implementation of cmpxchg() would be placed out-of-line,
and the in-line assembly for cmpxchg would default to:
NOP
BL <ll_sc_cmpxchg*_implementation>
NOP
The LL/SC implementation of each cmpxchg() function accepted arguments
as per AAPCS64 rules, to it was necessary to place the pointer in x0,
the older value in X1, and the new value in x2, and acquire the return
value from x0. The LL/SC implementation required a temporary register
(e.g. for the STXR status value). As the LL/SC implementation preserved
the old value, the LSE implementation does likewise.
Since commit:
addfc38672 ("arm64: atomics: avoid out-of-line ll/sc atomics")
... the LSE and LL/SC implementations of cmpxchg are inlined as separate
asm blocks, with another branch choosing between thw two. Due to this,
it is no longer necessary for the LSE implementation to match the
register constraints of the LL/SC implementation. This was partially
dealt with by removing the hard-coded use of x30 in commit:
3337cb5aea ("arm64: avoid using hard-coded registers for LSE atomics")
... but we didn't clean up the hard-coding of x0, x1, and x2.
This patch simplifies the LSE implementation of cmpxchg, removing the
register shuffling and directly clobbering the 'old' argument. This
gives the compiler greater freedom for register allocation, and avoids
redundant work.
The new constraints permit 'old' (Rs) and 'new' (Rt) to be allocated to
the same register when the initial values of the two are the same, e.g.
resulting in:
CAS X0, X0, [X1]
This is safe as Rs is only written back after the initial values of Rs
and Rt are consumed, and there are no UNPREDICTABLE behaviours to avoid
when Rs == Rt.
The new constraints also permit 'new' to be allocated to the zero
register, avoiding a MOV in a few cases. The same cannot be done for
'old' as it is both an input and output, and any caller of cmpxchg()
should care about the output value. Note that for CAS* the use of the
zero register never affects the ordering (while for SWP* the use of the
zero regsiter for the 'old' value drops any ACQUIRE semantic).
Compared to v6.2-rc4, a defconfig vmlinux is ~116KiB smaller, though the
resulting Image is the same size due to internal alignment and padding:
[mark@lakrids:~/src/linux]% ls -al vmlinux-*
-rwxr-xr-x 1 mark mark 137269304 Jan 16 11:59 vmlinux-after
-rwxr-xr-x 1 mark mark 137387936 Jan 16 10:54 vmlinux-before
[mark@lakrids:~/src/linux]% ls -al Image-*
-rw-r--r-- 1 mark mark 38711808 Jan 16 11:59 Image-after
-rw-r--r-- 1 mark mark 38711808 Jan 16 10:54 Image-before
This patch does not touch cmpxchg_double*() as that requires contiguous
register pairs, and separate patches will replace it with cmpxchg128*().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230314153700.787701-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com> # i.MX bridge
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20230310144705.1542207-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The WA states that we need to alert the GSC FW before doing a GSC engine
reset and then wait for 200ms. The GuC owns engine reset, so on the i915
side we only need to apply this for full GT reset.
Given that we do full GT resets in the resume paths to cleanup the HW
state and that a long wait in those scenarios would not be acceptable,
a faster path has been introduced where, if the GSC is idle, we try first
to individually reset the GuC and all engines except the GSC and only fall
back to full reset if that fails.
Note: according to the WA specs, if the GSC is idle it should be possible
to only wait for the uC wakeup time (~15ms) instead of the whole 200ms.
However, the GSC FW team have mentioned that the wakeup time can change
based on other things going on in the HW and pcode, so a good security
margin would be required. Given that when the GSC is idle we already
skip the wait & reset entirely and that this reduced wait would still
likely be too long to use in resume paths, it's not worth adding support
for this reduced wait.
v2: add comment to explain why it is safe to skip the GSC reset (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323231857.2194435-2-daniele.ceraolospurio@intel.com
Commit 3db9d59055 ("drm/i915/gt: Reset twice") modified the code to
always hit the GDRST register twice when doing a reset, with the
reported aim to fix invalid post-reset engine state on some platforms
(Jasperlake being the only one actually mentioned).
This is a problem on MTL, due to the fact that we have to apply a time
consuming WA (coming in the next patch) every time we hit the GDRST
register in a way that can include the GSC engine. Even post MTL, the
expectation is that we'll have some work to do before and after hitting
the GDRST if the GSC is involved.
Since the issue requiring the double reset seems to be limited to older
platforms, instead of trying to handle the double-reset on MTL and
future platforms it is just easier to turn it off. The default on MTL is
also for GuC to own engine reset, with i915 only covering full-GT reset.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323231857.2194435-1-daniele.ceraolospurio@intel.com
In the rare case where we do a full GT reset after starting the HuC
load and before it completes (which basically boils down to i915 hanging
during init), we need to cancel the delayed load fence, as it will be
re-initialized in the post-reset recovery.
Fixes: 27536e0327 ("drm/i915/huc: track delayed HuC load with a fence")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313205556.1174503-1-daniele.ceraolospurio@intel.com
The lockdep_assert_held() calls added to cooling_device_stats_setup()
and cooling_device_stats_destroy() by commit 790930f442 ("thermal:
core: Introduce thermal_cooling_device_update()") trigger false-positive
lockdep reports in code paths that are not subject to race conditions
(before cooling device registration and after cooling device removal).
For this reason, remove the lockdep_assert_held() calls from both
cooling_device_stats_setup() and cooling_device_stats_destroy() and
add one to thermal_cooling_device_stats_reinit() that has to be called
under the cdev lock.
Fixes: 790930f442 ("thermal: core: Introduce thermal_cooling_device_update()")
Link: https://lore.kernel.org/linux-acpi/ZCIDTLFt27Ei7+V6@ideak-desk.fi.intel.com
Reported-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit 3b16f6268e.
Selecting a Kconfig option that has its own set of dependencies tends to
end badly, and in this case 'randconfig' builds blew up on 32-bit ARM
where ARM_PMUV3 was being selecting with HW_PERF_EVENTS=n:
| drivers/perf/arm_pmuv3.c:68:5: error: use of undeclared identifier 'DTLB'
| [C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1D_TLB,
| ^
| fatal error: too many errors emitted, stopping now [-ferror-limit=]
| 20 errors generated.
|
| Kconfig warnings: (for reference only)
| WARNING: unmet direct dependencies detected for ARM_PMUV3
| Depends on [n]: PERF_EVENTS [=y] && HW_PERF_EVENTS [=n] && (ARM [=y] && CPU_V7 [=y] || ARM64)
| Selected by [y]:
| - ARCH_VIRT [=y] && ARCH_MULTI_V7 [=y] && PERF_EVENTS [=y]
As suggested by Marc, just drop the 'select' clause altogether by
reverting the patch which introduced it.
Link: https://lore.kernel.org/r/202303281539.zzI4vpw1-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
- Fix an error handling issue with PTRACE_GET_LAST_BREAK request so that
an -EFAULT is returned if put_user() fails, instead of ignoring it.
- Fix a build race for the modules_prepare target when
CONFIG_EXPOLINE_EXTERN is enabled by reintroducing the dependence
on scripts.
- Fix a memory leak in vfio_ap device driver.
- Adds missing earlyclobber annotations to __clear_user() inline assembly
to prevent incorrect register allocation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmQi33kACgkQjYWKoQLX
FBhpNgf/adZLOVnz9bFr96O9yB62j7Bh95bjeNSs6qsLDbJNfxkf9XNajDlVaNgT
XLrVKh/WDnozkaU850jqUYzIQHSiMJobCs+AVqttCAEBkZ9TiVzbd/lFDVNKTiAl
DqQ1SbG4urABmREsb07IgpFMCksbKMqo+xVuXbunHSP3YzNchQirXqslugiSy6zR
FD1Ee+yhLTYlphgx7MjyeGnpyikXDR58PuTYuFmvOFElgRybfzOCS5lkPUfoGV9K
vXf/dMx366gNyc+8TwS3fbgKMyu1n/8BlqMAcTaaq28oyHMye1QIv2kHDWViFqFU
XSVGyxR1FD3Lq04PCkT69mnt1JXLKw==
=/4ms
-----END PGP SIGNATURE-----
Merge tag 's390-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix an error handling issue with PTRACE_GET_LAST_BREAK request so
that -EFAULT is returned if put_user() fails, instead of ignoring it
- Fix a build race for the modules_prepare target when
CONFIG_EXPOLINE_EXTERN is enabled by reintroducing the dependence on
scripts
- Fix a memory leak in vfio_ap device driver
- Add missing earlyclobber annotations to __clear_user() inline
assembly to prevent incorrect register allocation
* tag 's390-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ptrace: fix PTRACE_GET_LAST_BREAK error handling
s390: reintroduce expoline dependence to scripts
s390/vfio-ap: fix memory leak in vfio_ap device driver
s390/uaccess: add missing earlyclobber annotations to __clear_user()
directory so that I.MX SoC family can also share the same device driver.
Samsung MIPI DSIM device is a common IP that can be used by Exynos and I.MX8M
Mini/Nano/Plus SoC. Regarding this, this patch series has added several
things below to existing MIPI DSI driver,
- Add exynos_dsi_type enum type to provide controller data from different
platforms.
- Add two pipeline detection ways support - existing Exynos DSI child node
and I.MX family of-graph port or ports.
- Consider component and bridged based DRM drivers.
- Add device tree binding support of I.MX family.
-----BEGIN PGP SIGNATURE-----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=6pUP
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
A patch series for moving MIPI-DSI driver for Exynos DRM to drm/bridge
directory so that I.MX SoC family can also share the same device driver.
Samsung MIPI DSIM device is a common IP that can be used by Exynos and I.MX8M
Mini/Nano/Plus SoC. Regarding this, this patch series has added several
things below to existing MIPI DSI driver,
- Add exynos_dsi_type enum type to provide controller data from different
platforms.
- Add two pipeline detection ways support - existing Exynos DSI child node
and I.MX family of-graph port or ports.
- Consider component and bridged based DRM drivers.
- Add device tree binding support of I.MX family.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328040524.49278-1-inki.dae@samsung.com
The code implicitly assumes that the list iterator finds a correct
handle. If 'vsi_handle' is not found the 'old_agg_vsi_info' was
pointing to an bogus memory location. For safety a separate list
iterator variable should be used to make the != NULL check on
'old_agg_vsi_info' correct under any circumstances.
Additionally Linus proposed to avoid any use of the list iterator
variable after the loop, in the attempt to move the list iterator
variable declaration into the macro to avoid any potential misuse after
the loop. Using it in a pointer comparison after the loop is undefined
behavior and should be omitted if possible [1].
Fixes: 37c592062b ("ice: remove the VSI info from previous agg")
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add profile conflict check while adding some FDIR rules to avoid
unexpected flow behavior, rules may have conflict including:
IPv4 <---> {IPv4_UDP, IPv4_TCP, IPv4_SCTP}
IPv6 <---> {IPv6_UDP, IPv6_TCP, IPv6_SCTP}
For example, when we create an FDIR rule for IPv4, this rule will work
on packets including IPv4, IPv4_UDP, IPv4_TCP and IPv4_SCTP. But if we
then create an FDIR rule for IPv4_UDP and then destroy it, the first
FDIR rule for IPv4 cannot work on pkt IPv4_UDP then.
To prevent this unexpected behavior, we add restriction in software
when creating FDIR rules by adding necessary profile conflict check.
Fixes: 1f7ea1cd6a ("ice: Enable FDIR Configure for AVF")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add a build time equivalent of fw_devlink.sync_state=timeout so that
board specific kernels could enable it and not have to deal with setting
or cluttering the kernel commandline.
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230317205134.964098-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current implementation causes ice_vsi_update() to update all VSI
fields based on the cached VSI context. This also assumes that the
ICE_AQ_VSI_PROP_Q_OPT_VALID bit is set. This can cause problems if the
VSI context is not correctly synced by the driver. Fix this by only
updating the fields that correspond to ICE_AQ_VSI_PROP_Q_OPT_VALID.
Also, make sure to save the updated result in the cached VSI context
on success.
Fixes: 348048e724 ("ice: Implement iidc operations")
Co-developed-by: Robert Malz <robertx.malz@intel.com>
Signed-off-by: Robert Malz <robertx.malz@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
make modules W=1 returns:
.../ice/ice_txrx_lib.c:448: warning: Function parameter or member 'first_idx' not described in 'ice_finalize_xdp_rx'
.../ice/ice_txrx.c:948: warning: Function parameter or member 'ntc' not described in 'ice_get_rx_buf'
.../ice/ice_txrx.c:1038: warning: Excess function parameter 'rx_buf' description in 'ice_construct_skb'
Fix these warnings by adding and deleting the deviant arguments.
Fixes: 2fba7dc515 ("ice: Add support for XDP multi-buffer on Rx side")
Fixes: d7956d81f1 ("ice: Pull out next_to_clean bump out of ice_put_rx_buf()")
CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Hi,
Dependencies
============
For va-macro bindings:
https://lore.kernel.org/r/20221118071849.25506-2-srinivas.kandagatla@linaro.org
NOT a dependency
================
The patchset can be applied independently of my previous fix:
https://lore.kernel.org/linux-arm-msm/20230310100937.32485-1-krzysztof.kozlowski@linaro.org/T/#u
Logically, better if they were together, but code will work fine other way.
Changes since v1
================
1. Move the flag define to common header.
Best regards,
Krzysztof
Krzysztof Kozlowski (9):
ASoC: dt-bindings: qcom,lpass-rx-macro: narrow clocks per variants
ASoC: dt-bindings: qcom,lpass-rx-macro: Add SM8550 RX macro
ASoC: codecs: lpass-rx-macro: add support for SM8550
ASoC: dt-bindings: qcom,lpass-tx-macro: narrow clocks per variants
ASoC: dt-bindings: qcom,lpass-tx-macro: Add SM8550 TX macro
ASoC: codecs: lpass-tx-macro: add support for SM8550
ASoC: dt-bindings: qcom,lpass-va-macro: Add SM8550 VA macro
ASoC: dt-bindings: qcom,lpass-wsa-macro: Add SM8550 WSA macro
ASoC: codecs: lpass-wsa-macro: add support for SM8550
.../bindings/sound/qcom,lpass-rx-macro.yaml | 76 +++++++++++++----
.../bindings/sound/qcom,lpass-tx-macro.yaml | 81 +++++++++++++++----
.../bindings/sound/qcom,lpass-va-macro.yaml | 18 +++++
.../bindings/sound/qcom,lpass-wsa-macro.yaml | 23 +++++-
sound/soc/codecs/lpass-macro-common.h | 3 +
sound/soc/codecs/lpass-rx-macro.c | 36 +++++++--
sound/soc/codecs/lpass-tx-macro.c | 35 ++++++--
sound/soc/codecs/lpass-wsa-macro.c | 37 +++++++--
8 files changed, 252 insertions(+), 57 deletions(-)
--
2.34.1
This patch will add the new test, which covers the prctl call with
PR_SET_VMA command. The test tries to give a name to the anonymous
VMA within the process memory map, and then checks the result of
the operation by parsing 'maps' virtual file.
Additionally, the test tries to call the prctl PR_SET_VMA command
with invalid arguments, and checks the error codes for correctness.
At the moment anonymous VMA naming through prctl call functionality
is not covered with any tests, so I think implementing it makes sense.
In version 2 of this patch I consider the selftest Makefile rule about
TARGETS entries order - I moved the 'prctl' entry in the Makefile to
follow the lexicographic order. In version 1 it was placed at the
end of the list.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The core sched kselftest makes prctl calls only with correct
parameters. This patch will extend this test with more core
schedule prctl calls with wrong parameters to increase code
coverage.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are several 'malloc' calls in test_memcontrol, which can be
unsuccessful. This patch will add 'malloc' failures checking to
give more details about test's fail reasons and avoid possible
undefined behavior during the future null dereference (like the
one in alloc_anon_50M_check_swap function).
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
peeksiginfo creates an array of 10 instances of 'siginfo_t',
but actually uses only one. This patch will reduce amount
of memory on the stack used by the peeksiginfo test.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Update device-tree stm32mp135f-dk.dts to add usart1, uart8, usart2
and uart aliases.
- Usart2 is used to interface a BT device, enable it by default.
- Usart1 and uart8 are available on expansion connector.
They are kept disabled. So, the pins are kept in analog state to
lower power consumption by default or can be used as GPIO.
- Uart4 is used for console.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add pins for uart4, uart8, usart1 and usart2 in stm32mp13-pinctrl.dtsi
Theses pins have three states: default, sleep and idle.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Remove duplicates and clean uart aliases.
Uart aliases and uart pins should be declared and associated to
uart instance at the same time.
Put also aliases node above chosen node as same as stm32mp157c-dk2.dts.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Remove duplicates and clean uart aliases.
Uart aliases and uart pins should be declared and associated to
uart instance at the same time.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
On stm32mp15xx-dkx boards:
- Fix slew-rate of USART 2 to 0 like other USARTs, because frequency of
USART pins doesn't exceed 10Mhz.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Essentially this is a revert of commit d9d54a530a ("drm/i915: Put
future HW and their uAPIs under STAGING & BROKEN").
We currently have no users for this config option. The last one was
removed in commit 8c26491f58 ("drm/i915: Kill the fake lmem
support"). Drop it altogether; it's easy enough to resurrect if need
arises.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327105330.312131-2-jani.nikula@intel.com
This patch adds initial support of STM32MP151 microprocessor (MPU)
based on Arm Cortex-A7. New Cortex-A infrastructure (gic, timer,...)
are selected if ARCH_MULTI_V7 is defined.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Roan van Dijk <roan@protonic.nl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra
triggers:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
3 locks held by cpuhp/0/24:
#0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248
#1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248
#2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130
irq event stamp: 36
hardirqs last enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0
hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248
softirqs last enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...]
Hardware name: WIWYNN Mt.Jade Server [...]
Call trace:
dump_backtrace+0x114/0x120
show_stack+0x20/0x70
dump_stack_lvl+0x9c/0xd8
dump_stack+0x18/0x34
__might_resched+0x188/0x228
rt_spin_lock+0x70/0x120
sdei_cpuhp_up+0x3c/0x130
cpuhp_invoke_callback+0x250/0xf08
cpuhp_thread_fun+0x120/0x248
smpboot_thread_fn+0x280/0x320
kthread+0x130/0x140
ret_from_fork+0x10/0x20
sdei_cpuhp_up() is called in the STARTING hotplug section,
which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry
instead to execute the cpuhp cb later, with preemption enabled.
SDEI originally got its own cpuhp slot to allow interacting
with perf. It got superseded by pNMI and this early slot is not
relevant anymore. [1]
Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the
calling CPU. It is checked that preemption is disabled for them.
_ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'.
Preemption is enabled in those threads, but their cpumask is limited
to 1 CPU.
Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb
don't trigger them.
Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call
which acts on the calling CPU.
[1]:
https://lore.kernel.org/all/5813b8c5-ae3e-87fd-fccc-94c9cd08816d@arm.com/
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20230216084920.144064-1-pierre.gondois@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230328061524.77529-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following commit b0de7fa706
("regulator: pca9450: Remove restrictions for regulator-name") to remove
the constraints on the regulator-name to allow using arbitrary and
descriptive names for the regulators.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230328060032.1983381-1-peng.fan@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is able to work fine without relying on a mandatory interrupt
being assigned to the I2C device. This is only needed when making use of
the jack-detect support.
However, the following warning message is always emitted when there is
no such interrupt available:
es8316 0-0011: Failed to get IRQ 0: -22
Do not attempt to request an IRQ if it is not available/valid. This also
ensures the rather misleading message is not displayed anymore.
Also note the IRQ validation relies on commit dab472eb93 ("i2c /
ACPI: Use 0 to indicate that device does not have interrupt assigned").
Fixes: 8222576610 ("ASoC: es8316: Add jack-detect support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230328094901.50763-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
